CoreSight December 2019

coresight@lists.linaro.org

14 participants
41 discussions

[PATCH 5.4 244/434] perf cs-etm: Fix definition of macro TO_CS_QUEUE_NR

by Greg Kroah-Hartman

From: Leo Yan <leo.yan(a)linaro.org> [ Upstream commit 9d604aad4bb022e848dec80d6fe5f73fe87061a2 ] Macro TO_CS_QUEUE_NR definition has a typo, which uses 'trace_id_chan' as its parameter, this doesn't match with its definition body which uses 'trace_chan_id'. So renames the parameter to 'trace_chan_id'. It's luck to have a local variable 'trace_chan_id' in the function cs_etm__setup_queue(), even we wrongly define the macro TO_CS_QUEUE_NR, the local variable 'trace_chan_id' is used rather than the macro's parameter 'trace_id_chan'; so the compiler doesn't complain for this before. After renaming the parameter, it leads to a compiling error due cs_etm__setup_queue() has no variable 'trace_id_chan'. This patch uses the variable 'trace_chan_id' for the macro so that fixes the compiling error. Signed-off-by: Leo Yan <leo.yan(a)linaro.org> Reviewed-by: Mathieu Poirier <mathieu.poirier(a)linaro.org> Cc: Alexander Shishkin <alexander.shishkin(a)linux.intel.com> Cc: Jiri Olsa <jolsa(a)redhat.com> Cc: Mark Rutland <mark.rutland(a)arm.com> Cc: Namhyung Kim <namhyung(a)kernel.org> Cc: Peter Zijlstra <peterz(a)infradead.org> Cc: Suzuki Poulouse <suzuki.poulose(a)arm.com> Cc: coresight ml <coresight(a)lists.linaro.org> Cc: linux-arm-kernel(a)lists.infradead.org Link: http://lore.kernel.org/lkml/20191021074808.25795-1-leo.yan@linaro.org Signed-off-by: Arnaldo Carvalho de Melo <acme(a)redhat.com> Signed-off-by: Sasha Levin <sashal(a)kernel.org> --- tools/perf/util/cs-etm.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/tools/perf/util/cs-etm.c b/tools/perf/util/cs-etm.c index 4ba0f871f086..f5f855fff412 100644 --- a/tools/perf/util/cs-etm.c +++ b/tools/perf/util/cs-etm.c @@ -110,7 +110,7 @@ static int cs_etm__decode_data_block(struct cs_etm_queue *etmq); * encode the etm queue number as the upper 16 bit and the channel as * the lower 16 bit. */ -#define TO_CS_QUEUE_NR(queue_nr, trace_id_chan) \ +#define TO_CS_QUEUE_NR(queue_nr, trace_chan_id) \ (queue_nr << 16 | trace_chan_id) #define TO_QUEUE_NR(cs_queue_nr) (cs_queue_nr >> 16) #define TO_TRACE_CHAN_ID(cs_queue_nr) (cs_queue_nr & 0x0000ffff) @@ -819,7 +819,7 @@ static int cs_etm__setup_queue(struct cs_etm_auxtrace *etm, * Note that packets decoded above are still in the traceID's packet * queue and will be processed in cs_etm__process_queues(). */ - cs_queue_nr = TO_CS_QUEUE_NR(queue_nr, trace_id_chan); + cs_queue_nr = TO_CS_QUEUE_NR(queue_nr, trace_chan_id); ret = auxtrace_heap__add(&etm->heap, cs_queue_nr, timestamp); out: return ret; -- 2.20.1

4 years, 5 months

Decoding ATOM packet

by Bharat Bhushan

Hi All, I have a basic question about ATOM packet observed using OpenCSD. Taking below example: I_ATOM_F3 : Atom format 3.; NEE So "N" is for first conditional branch or last conditional branch on code? Thanks -Bharat

4 years, 5 months

Posledni exekucni vyzova 20.12.2019-0177-51.

by Jakub Pavlik

Dobry den, Kontrolou nasi ucetni evidence jsme zjistili, ze jste nam dosud neuhradili dluznou castku ve vysi 50.000,- Kc. V opacnem pripade budu nucen obratit se se svym narokem na soud s navrhem na vydani platebniho rozkazu. Verim vsak, ze to nebude nutne. Podrobnosti v priloze. S pozdravem, soudni exekutor: Jakub Pavlik.

4 years, 5 months

[PATCH v6 00/15] CoreSight CTI Driver

by Mike Leach

CTIs are defined in the device tree and associated with other CoreSight devices. The core CoreSight code has been modified to enable the registration of the CTI devices on the same bus as the other CoreSight components, but as these are not actually trace generation / capture devices, they are not part of the Coresight path when generating trace. However, the definition of the standard CoreSight device has been extended to include a reference to an associated CTI device, and the enable / disable trace path operations will auto enable/disable any associated CTI devices at the same time. Programming is at present via sysfs - a full API is provided to utilise the hardware capabilities. As CTI devices are unprogrammed by default, the auto enable describe above will have no effect until explicit programming takes place. A set of device tree bindings specific to the CTI topology has been defined. The driver accesses these in a platform agnostic manner, so ACPI bindings can be added later, once they have been agreed and defined for the CTI device. Documentation has been updated to describe both the CTI hardware, its use and programming in sysfs, and the new dts bindings required. Tested on DB410 board and Juno board, against the Linux 5.5-rc1 tree. Changes since v5: 1) Fixed up device tree .yaml file. Using extra compatible string for v8 architecture CTI connections. 2) Ensure association code respects coresight mutex when setting cross referenced pointers. Add in shutdown code. 3) Multiple minor code fixes & rationalisation. Changes since v4: Multiple changes following feedback from Mathieu, Leo and Suzuki. 1) Dropped RFC tag - wider distribution 2) CTI bindings definition now presented as a .yaml file - tested with with 'dt-doc-validate' from devicetree.org/dt-schema project and in kernel build tree with 'make dtbs_check' per kernel docs. 3) Sysfs links to other CoreSight devices moved out of this set into a following set that deals with all CoreSight devices & sysfs links. 4) Documentation in .rst format and new directory following patchset in [1]. Extended example provided in docs. 5) Rationalised devicetree of_ specifics to use generic fwnode functions where possible to enable easier addition of ACPI support later. 6) Other minor changes as requested in feedback from last patchset. Changes since v3: 1) After discussion on CS mailing list, each CTI connection has a triggers<N> sysfs directory with name and trigger signals listed for the connection. 2) Initial code for creating sysfs links between CoreSight components is introduced and implementation for CTI provided. This allows exploration of the CoreSight topology within the sysfs infrastructure. Patches for links between other CoreSight components to follow. 3) Power management - CPU hotplug and idle omitted from this set as ongoing developments may define required direction. Additional patch set to follow. 4) Multiple fixes applied as requested by reviewers esp. Matthieu, Suzuki and Leo. Changes since v2: Updates to allow for new features on coresight/next and feedback from Mathieu and Leo. 1) Rebase and restructuring to apply on top of ACPI support patch set, currently on coresight/next. of_coresight_cti has been renamed to coresight-cti-platform and device tree bindings added to this but accessed in a platform agnostic manner using fwnode for later ACPI support to be added. 2) Split the sysfs patch info a series of functional patches. 3) Revised the refcount and enabling support. 4) Adopted the generic naming protocol - CTIs are either cti_cpuN or cti_sysM 5) Various minor presentation /checkpatch issues highlighted in feedback. 6) revised CPU hotplug to cover missing cases needed by ETM. Changes since v1: 1) Significant restructuring of the source code. Adds cti-sysfs file and cti device tree file. Patches add per feature rather than per source file. 2) CPU type power event handling for hotplug moved to CoreSight core, with generic registration interface provided for all CPU bound CS devices to use. 3) CTI signal interconnection details in sysfs now generated dynamically from connection lists in driver. This to fix issue with multi-line sysfs output in previous version. 4) Full device tree bindings for DB410 and Juno provided (to the extent that CTI information is available). 5) AMBA driver update for UCI IDs are now upstream so no longer included in this set. Mike Leach (15): coresight: cti: Initial CoreSight CTI Driver coresight: cti: Add sysfs coresight mgmt reg access. coresight: cti: Add sysfs access to program function regs coresight: cti: Add sysfs trigger / channel programming API dt-bindings: arm: Adds CoreSight CTI hardware definitions. coresight: cti: Add device tree support for v8 arch CTI coresight: cti: Add device tree support for custom CTI. coresight: cti: Enable CTI associated with devices. coresight: cti: Add connection information to sysfs dt-bindings: qcom: Add CTI options for qcom msm8916 dt-bindings: arm: Juno platform - add CTI entries to device tree. dt-bindings: hisilicon: Add CTI bindings for hi-6220 docs: coresight: Update documentation for CoreSight to cover CTI. docs: sysfs: coresight: Add sysfs ABI documentation for CTI Update MAINTAINERS to add reviewer for CoreSight. .../testing/sysfs-bus-coresight-devices-cti | 221 ++++ .../bindings/arm/coresight-cti.yaml | 303 +++++ .../devicetree/bindings/arm/coresight.txt | 7 + .../trace/coresight/coresight-ect.rst | 211 +++ Documentation/trace/coresight/coresight.rst | 13 + MAINTAINERS | 3 + arch/arm64/boot/dts/arm/juno-base.dtsi | 149 ++- arch/arm64/boot/dts/arm/juno-cs-r1r2.dtsi | 31 +- arch/arm64/boot/dts/arm/juno-r1.dts | 25 + arch/arm64/boot/dts/arm/juno-r2.dts | 25 + arch/arm64/boot/dts/arm/juno.dts | 25 + .../boot/dts/hisilicon/hi6220-coresight.dtsi | 130 +- arch/arm64/boot/dts/qcom/msm8916.dtsi | 85 +- drivers/hwtracing/coresight/Kconfig | 21 + drivers/hwtracing/coresight/Makefile | 3 + .../coresight/coresight-cti-platform.c | 485 +++++++ .../hwtracing/coresight/coresight-cti-sysfs.c | 1175 +++++++++++++++++ drivers/hwtracing/coresight/coresight-cti.c | 748 +++++++++++ drivers/hwtracing/coresight/coresight-cti.h | 235 ++++ .../hwtracing/coresight/coresight-platform.c | 21 + drivers/hwtracing/coresight/coresight-priv.h | 15 + drivers/hwtracing/coresight/coresight.c | 86 +- include/dt-bindings/arm/coresight-cti-dt.h | 37 + include/linux/coresight.h | 27 + 24 files changed, 4050 insertions(+), 31 deletions(-) create mode 100644 Documentation/ABI/testing/sysfs-bus-coresight-devices-cti create mode 100644 Documentation/devicetree/bindings/arm/coresight-cti.yaml create mode 100644 Documentation/trace/coresight/coresight-ect.rst create mode 100644 drivers/hwtracing/coresight/coresight-cti-platform.c create mode 100644 drivers/hwtracing/coresight/coresight-cti-sysfs.c create mode 100644 drivers/hwtracing/coresight/coresight-cti.c create mode 100644 drivers/hwtracing/coresight/coresight-cti.h create mode 100644 include/dt-bindings/arm/coresight-cti-dt.h -- 2.17.1

4 years, 5 months

Re: progress in btrace with etm in gdb

by Mathieu Poirier

As I asked before, please include the coresight mailing list when discussing coresight. On Mon, 16 Dec 2019 at 15:20, zied guermazi <guermazi_zied(a)yahoo.com> wrote: > > hi Mike, hi Mathieu > last few weeks I was able to spend some time on implementing this feature, and I want to share the status with you and get your recommendation on organizational and technical level. > so far I was able to use perf events to configure the drivers for etm and collect the traces. the code was tested successfully on an STM32MP157A discovery kit (arm v7). Perfect, I happen to have one like that as well. > I would like to push this on git, first for review and second for integration and creating traction . Do you think it is ok to push it in this status (feature partially achieved) ? is linaro gdb git the correct one? who is > the maintainer of this part of gdb? I do not have an ARMv8 platform to test. who can support here? Mike's reply on the above was correct. You can use a personal git repository and get a dragonboard 410c. They are inexpensive and it is one of our reference platforms. > > during the implementation few technical question raised: > - etm tracing collection requires selecting a trace sink. and I have two alternatives: either extending the "record btrace etm" command (used to start tracing) with a sink as an argument or extending the command "set record btrace" (general configuration of tracing) with etm sink sub-command? (I have hard-coded it currently to be able to progress) > - currently I am hardcoding the path "/sys/bus/event_source/devices/cs_etm/" as the default etm source, is this guaranteed to be unique? can we have a system with many etm sources enumerated in the sysfs. > This question worries me a lot... There is one ETM per CPU. > for parsing the traces I will need some configuration parameters like the content of registers ETMCR, ETMIDR, ETMCCER, ETMTRACEIDR. if my understanding of the implementation of perf is correct, it is collecting them from the sysfs files located in /sys/bus/event_source/devices/cs_etm/cpu0/mgmt/. which are global for the system. my question is what will happen if two process are requesting tracing at the same time? how to differentiate between traces going to one session from the second one? is it possible to get the parameters of a given session by some kind of ioctl request to the file descriptor we get out of sys_perf_open call? > To complement Mike's reply HW specifics related to the implementation are fetched from sysfs because, in user space, there is no other way to get that information. Event specific configuration are dynamically taken from the command line. As such the configuration for each event is unique and doesn't trample one another. > I will publish those queries in the linaro coresight and gdb forums, I wanted first to align with you especially on the organizational issues, before going to a bigger round. I advise you to take the time needed to really understand how the coresight subsystem works before moving forward. More specifically process and CPU wide trace scenarios differ along with how trace configuration are handled from the perf command line all the way to the decoding phase. > > Thanks for your support > Zied Guermazi > >

4 years, 5 months

[PATCH v6 10/15] dt-bindings: qcom: Add CTI options for qcom msm8916

by Mike Leach

Adds system and CPU bound CTI definitions for Qualcom msm8916 platform (Dragonboard DB410C). System CTIs 2-11 are omitted as no information available at present. Signed-off-by: Mike Leach <mike.leach(a)linaro.org> --- arch/arm64/boot/dts/qcom/msm8916.dtsi | 85 +++++++++++++++++++++++++-- 1 file changed, 81 insertions(+), 4 deletions(-) diff --git a/arch/arm64/boot/dts/qcom/msm8916.dtsi b/arch/arm64/boot/dts/qcom/msm8916.dtsi index 8686e101905c..68587968f5c0 100644 --- a/arch/arm64/boot/dts/qcom/msm8916.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8916.dtsi @@ -8,6 +8,7 @@ #include <dt-bindings/reset/qcom,gcc-msm8916.h> #include <dt-bindings/clock/qcom,rpmcc.h> #include <dt-bindings/thermal/thermal.h> +#include <dt-bindings/arm/coresight-cti-dt.h> / { interrupt-parent = <&intc>; @@ -1357,7 +1358,7 @@ cpu = <&CPU3>; }; - etm@85c000 { + etm0: etm@85c000 { compatible = "arm,coresight-etm4x", "arm,primecell"; reg = <0x85c000 0x1000>; @@ -1375,7 +1376,7 @@ }; }; - etm@85d000 { + etm1: etm@85d000 { compatible = "arm,coresight-etm4x", "arm,primecell"; reg = <0x85d000 0x1000>; @@ -1393,7 +1394,7 @@ }; }; - etm@85e000 { + etm2: etm@85e000 { compatible = "arm,coresight-etm4x", "arm,primecell"; reg = <0x85e000 0x1000>; @@ -1411,7 +1412,7 @@ }; }; - etm@85f000 { + etm3: etm@85f000 { compatible = "arm,coresight-etm4x", "arm,primecell"; reg = <0x85f000 0x1000>; @@ -1429,6 +1430,82 @@ }; }; + /* System CTIs */ + /* CTI 0 - TMC connections */ + cti@810000 { + compatible = "arm,coresight-cti", "arm,primecell"; + reg = <0x810000 0x1000>; + + clocks = <&rpmcc RPM_QDSS_CLK>; + clock-names = "apb_pclk"; + }; + + /* CTI 1 - TPIU connections */ + cti@811000 { + compatible = "arm,coresight-cti", "arm,primecell"; + reg = <0x811000 0x1000>; + + clocks = <&rpmcc RPM_QDSS_CLK>; + clock-names = "apb_pclk"; + }; + + /* CTIs 2-11 - no information - not instantiated */ + + /* Core CTIs; CTIs 12-15 */ + /* CTI - CPU-0 */ + cti@858000 { + compatible = "arm,coresight-cti-v8-arch", "arm,coresight-cti", + "arm,primecell"; + reg = <0x858000 0x1000>; + + clocks = <&rpmcc RPM_QDSS_CLK>; + clock-names = "apb_pclk"; + + cpu = <&CPU0>; + arm,cs-dev-assoc = <&etm0>; + + }; + + /* CTI - CPU-1 */ + cti@859000 { + compatible = "arm,coresight-cti-v8-arch", "arm,coresight-cti", + "arm,primecell"; + reg = <0x859000 0x1000>; + + clocks = <&rpmcc RPM_QDSS_CLK>; + clock-names = "apb_pclk"; + + cpu = <&CPU1>; + arm,cs-dev-assoc = <&etm1>; + }; + + /* CTI - CPU-2 */ + cti@85a000 { + compatible = "arm,coresight-cti-v8-arch", "arm,coresight-cti", + "arm,primecell"; + reg = <0x85a000 0x1000>; + + clocks = <&rpmcc RPM_QDSS_CLK>; + clock-names = "apb_pclk"; + + cpu = <&CPU2>; + arm,cs-dev-assoc = <&etm2>; + }; + + /* CTI - CPU-3 */ + cti@85b000 { + compatible = "arm,coresight-cti-v8-arch", "arm,coresight-cti", + "arm,primecell"; + reg = <0x85b000 0x1000>; + + clocks = <&rpmcc RPM_QDSS_CLK>; + clock-names = "apb_pclk"; + + cpu = <&CPU3>; + arm,cs-dev-assoc = <&etm3>; + }; + + venus: video-codec@1d00000 { compatible = "qcom,msm8916-venus"; reg = <0x01d00000 0xff000>; -- 2.17.1

4 years, 5 months

[PATCH v6 05/15] dt-bindings: arm: Adds CoreSight CTI hardware definitions.

by Mike Leach

Adds new coresight-cti.yaml file describing the bindings required to define CTI in the device trees. Adds an include file to dt-bindings/arm to define constants describing common signal functionality used in CoreSight and generic usage. Signed-off-by: Mike Leach <mike.leach(a)linaro.org> Reviewed-by: Mathieu Poirier <mathieu.poirier(a)linaro.org> --- .../bindings/arm/coresight-cti.yaml | 303 ++++++++++++++++++ .../devicetree/bindings/arm/coresight.txt | 7 + MAINTAINERS | 2 + include/dt-bindings/arm/coresight-cti-dt.h | 37 +++ 4 files changed, 349 insertions(+) create mode 100644 Documentation/devicetree/bindings/arm/coresight-cti.yaml create mode 100644 include/dt-bindings/arm/coresight-cti-dt.h diff --git a/Documentation/devicetree/bindings/arm/coresight-cti.yaml b/Documentation/devicetree/bindings/arm/coresight-cti.yaml new file mode 100644 index 000000000000..cbbe88fa7148 --- /dev/null +++ b/Documentation/devicetree/bindings/arm/coresight-cti.yaml @@ -0,0 +1,303 @@ +# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause +# Copyright 2019 Linaro Ltd. +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/arm/coresight-cti.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: ARM Coresight Cross Trigger Interface (CTI) device. + +description: | + The CoreSight Embedded Cross Trigger (ECT) consists of CTI devices connected + to one or more CoreSight components and/or a CPU, with CTIs interconnected in + a star topology via the Cross Trigger Matrix (CTM), which is not programmable. + The ECT components are not part of the trace generation data path and are thus + not part of the CoreSight graph described in the general CoreSight bindings + file coresight.txt. + + The CTI component properties define the connections between the individual + CTI and the components it is directly connected to, consisting of input and + output hardware trigger signals. CTIs can have a maximum number of input and + output hardware trigger signals (8 each for v1 CTI, 32 each for v2 CTI). The + number is defined at design time, the maximum of each defined in the DEVID + register. + + CTIs are interconnected in a star topology via the CTM, using a number of + programmable channels, usually 4, but again implementation defined and + described in the DEVID register. The star topology is not required to be + described in the bindings as the actual connections are software + programmable. + + In general the connections between CTI and components via the trigger signals + are implementation defined, except when the CTI is connected to an ARM v8 + architecture core and optional ETM. + + In this case the ARM v8 architecture defines the required signal connections + between CTI and the CPU core and ETM if present. In the case of a v8 + architecturally connected CTI an additional compatible string is used to + indicate this feature (arm,coresight-cti-v8-arch). + + When CTI trigger connection information is unavailable then a minimal driver + binding can be declared with no explicit trigger signals. This will result + the driver detecting the maximum available triggers and channels from the + DEVID register and make them all available for use as a single default + connection. Any user / client application will require additional information + on the connections between the CTI and other components for correct operation. + This information might be found by enabling the Integration Test registers in + the driver (set CONFIG_CORESIGHT_CTI_INTEGRATION_TEST in Kernel + configuration). These registers may be used to explore the trigger connections + between CTI and other CoreSight components. + + Certain triggers between CoreSight devices and the CTI have specific types + and usages. These can be defined along with the signal indexes with the + constants defined in <dt-bindings/arm/coresight-cti-dt.h> + + For example a CTI connected to a core will usually have a DBGREQ signal. This + is defined in the binding as type PE_EDBGREQ. These types will appear in an + optional array alongside the signal indexes. Omitting types will default all + signals to GEN_IO. + + Note that some hardware trigger signals can be connected to non-CoreSight + components (e.g. UART etc) depending on hardware implementation. + +maintainers: + - Mike Leach <mike.leach(a)linaro.org> + +allOf: + - $ref: /schemas/arm/primecell.yaml# + +# Need a custom select here or 'arm,primecell' will match on lots of nodes +select: + properties: + compatible: + contains: + enum: + - arm,coresight-cti + required: + - compatible + +properties: + $nodename: + pattern: "^cti(@[0-9a-f]+)$" + compatible: + oneOf: + - items: + - const: arm,coresight-cti + - const: arm,primecell + - items: + - const: arm,coresight-cti-v8-arch + - const: arm,coresight-cti + - const: arm,primecell + + reg: + maxItems: 1 + + cpu: + allOf: + - $ref: /schemas/types.yaml#/definitions/phandle + description: Handle to cpu this device is associated with. + + arm,cti-ctm-id: + allOf: + - $ref: /schemas/types.yaml#/definitions/uint32 + description: + Defines the CTM this CTI is connected to, in large systems with multiple + separate CTI/CTM nets. Typically multi-socket systems where the CTM is + propagated between sockets. + + arm,cs-dev-assoc: + allOf: + - $ref: /schemas/types.yaml#/definitions/phandle + description: + defines a phandle reference to an associated CoreSight trace device. + When the associated trace device is enabled, then the respective CTI + will be enabled. Use in a trig-conns node, or in CTI base node when + arm,cti-v8-arch present. If the associated device has not been registered + then the node name will be stored as the connection name for later + resolution. If the associated device is not a CoreSight device or not + registered then the node name will remain the connection name and + automatic enabling will not occur. + +patternProperties: + '^trig_conns@([0-9]+)$': + type: object + description: + A trigger connections child node which describes the trigger signals + between this CTI and another hardware device. This device may be a CPU, + CoreSight device, any other hardware device or simple external IO lines. + The connection may have both input and output triggers, or only one or the + other. + + properties: + + arm,trig-in-sigs: + allOf: + - $ref: /schemas/types.yaml#/definitions/uint32-array + minItems: 1 + maxItems: 32 + description: + List of CTI trigger in signal numbers in use by a trig-conns node. + + arm,trig-in-types: + allOf: + - $ref: /schemas/types.yaml#/definitions/uint32-array + minItems: 1 + maxItems: 32 + description: + List of constants representing the types for the CTI trigger in + signals. Types in this array match to the corresponding signal in the + arm,trig-in-sigs array. If the -types array is smaller, or omitted + completely, then the types will default to GEN_IO. + + arm,trig-out-sigs: + allOf: + - $ref: /schemas/types.yaml#/definitions/uint32-array + minItems: 1 + maxItems: 32 + description: + List of CTI trigger out signal numbers in use by a trig-conns node. + + arm,trig-out-types: + allOf: + - $ref: /schemas/types.yaml#/definitions/uint32-array + minItems: 1 + maxItems: 32 + description: + List of constants representing the types for the CTI trigger out + signals. Types in this array match to the corresponding signal + in the arm,trig-out-sigs array. If the "-types" array is smaller, + or omitted completely, then the types will default to GEN_IO. + + arm,trig-filters: + allOf: + - $ref: /schemas/types.yaml#/definitions/uint32-array + minItems: 1 + maxItems: 32 + description: + List of CTI trigger out signals that will be blocked from becoming + active, unless filtering is disabled on the driver. + + arm,trig-conn-name: + allOf: + - $ref: /schemas/types.yaml#/definitions/string + description: + Defines a connection name that will be displayed, if the cpu or + arm,cs-dev-assoc properties are not being used in this connection. + Principle use for CTI that are connected to non-CoreSight devices, or + external IO. + + anyOf: + - required: + - arm,trig-in-sigs + - required: + - arm,trig-out-sigs + oneOf: + - required: + - arm,trig-conn-name + - required: + - cpu + - required: + - arm,cs-dev-assoc + +required: + - compatible + - reg + - clocks + - clock-names + +examples: + # minimum CTI definition. DEVID register used to set number of triggers. + - | + cti@20020000 { + compatible = "arm,coresight-cti", "arm,primecell"; + reg = <0x20020000 0x1000>; + + clocks = <&soc_smc50mhz>; + clock-names = "apb_pclk"; + }; + # v8 architecturally defined CTI - CPU + ETM connections generated by the + # driver according to the v8 architecture specification. + - | + cti@859000 { + compatible = "arm,coresight-cti-v8-arch", "arm,coresight-cti", + "arm,primecell"; + reg = <0x859000 0x1000>; + + clocks = <&soc_smc50mhz>; + clock-names = "apb_pclk"; + + cpu = <&CPU1>; + arm,cs-dev-assoc = <&etm1>; + }; + # Implementation defined CTI - CPU + ETM connections explicitly defined.. + # Shows use of type constants from dt-bindings/arm/coresight-cti-dt.h + - | + #include <dt-bindings/arm/coresight-cti-dt.h> + + cti@858000 { + compatible = "arm,coresight-cti", "arm,primecell"; + reg = <0x858000 0x1000>; + + clocks = <&soc_smc50mhz>; + clock-names = "apb_pclk"; + + arm,cti-ctm-id = <1>; + + trig-conns@0 { + arm,trig-in-sigs = <4 5 6 7>; + arm,trig-in-types = <ETM_EXTOUT + ETM_EXTOUT + ETM_EXTOUT + ETM_EXTOUT>; + arm,trig-out-sigs = <4 5 6 7>; + arm,trig-out-types = <ETM_EXTIN + ETM_EXTIN + ETM_EXTIN + ETM_EXTIN>; + arm,cs-dev-assoc = <&etm0>; + }; + + trig-conns@1 { + cpu = <&CPU0>; + arm,trig-in-sigs = <0 1>; + arm,trig-in-types = <PE_DBGTRIGGER + PE_PMUIRQ>; + arm,trig-out-sigs=<0 1 2 >; + arm,trig-out-types = <PE_EDBGREQ + PE_DBGRESTART + PE_CTIIRQ>; + + arm,trig-filters = <0>; + }; + }; + # Implementation defined CTI - non CoreSight component connections. + - | + cti@20110000 { + compatible = "arm,coresight-cti", "arm,primecell"; + reg = <0 0x20110000 0 0x1000>; + + clocks = <&soc_smc50mhz>; + clock-names = "apb_pclk"; + + trig-conns@0 { + arm,trig-in-sigs=<0>; + arm,trig-in-types=<GEN_INTREQ>; + arm,trig-out-sigs=<0>; + arm,trig-out-types=<GEN_HALTREQ>; + arm,trig-conn-name = "sys_profiler"; + }; + + trig-conns@1 { + arm,trig-out-sigs=<2 3>; + arm,trig-out-types=<GEN_HALTREQ GEN_RESTARTREQ>; + arm,trig-conn-name = "watchdog"; + }; + + trig-conns@2 { + arm,trig-in-sigs=<1 6>; + arm,trig-in-types=<GEN_HALTREQ GEN_RESTARTREQ>; + arm,trig-conn-name = "g_counter"; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/arm/coresight.txt b/Documentation/devicetree/bindings/arm/coresight.txt index d02c42d21f2f..846f6daae71b 100644 --- a/Documentation/devicetree/bindings/arm/coresight.txt +++ b/Documentation/devicetree/bindings/arm/coresight.txt @@ -45,6 +45,10 @@ its hardware characteristcs. - Coresight Address Translation Unit (CATU) "arm,coresight-catu", "arm,primecell"; + - Coresight Cross Trigger Interface (CTI): + "arm,coresight-cti", "arm,primecell"; + See coresight-cti.yaml for full CTI definitions. + * reg: physical base address and length of the register set(s) of the component. @@ -72,6 +76,9 @@ its hardware characteristcs. * reg-names: the only acceptable values are "stm-base" and "stm-stimulus-base", each corresponding to the areas defined in "reg". +* Required properties for Coresight Cross Trigger Interface (CTI) + See coresight-cti.yaml for full CTI definitions. + * Required properties for devices that don't show up on the AMBA bus, such as non-configurable replicators and non-configurable funnels: diff --git a/MAINTAINERS b/MAINTAINERS index bd5847e802de..77f5d28fa84b 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -1645,9 +1645,11 @@ R: Suzuki K Poulose <suzuki.poulose(a)arm.com> L: linux-arm-kernel(a)lists.infradead.org (moderated for non-subscribers) S: Maintained F: drivers/hwtracing/coresight/* +F: include/dt-bindings/arm/coresight-cti-dt.h F: Documentation/trace/coresight/* F: Documentation/devicetree/bindings/arm/coresight.txt F: Documentation/devicetree/bindings/arm/coresight-cpu-debug.txt +F: Documentation/devicetree/bindings/arm/coresight-cti.yaml F: Documentation/ABI/testing/sysfs-bus-coresight-devices-* F: tools/perf/arch/arm/util/pmu.c F: tools/perf/arch/arm/util/auxtrace.c diff --git a/include/dt-bindings/arm/coresight-cti-dt.h b/include/dt-bindings/arm/coresight-cti-dt.h new file mode 100644 index 000000000000..61e7bdf8ea6e --- /dev/null +++ b/include/dt-bindings/arm/coresight-cti-dt.h @@ -0,0 +1,37 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * This header provides constants for the defined trigger signal + * types on CoreSight CTI. + */ + +#ifndef _DT_BINDINGS_ARM_CORESIGHT_CTI_DT_H +#define _DT_BINDINGS_ARM_CORESIGHT_CTI_DT_H + +#define GEN_IO 0 +#define GEN_INTREQ 1 +#define GEN_INTACK 2 +#define GEN_HALTREQ 3 +#define GEN_RESTARTREQ 4 +#define PE_EDBGREQ 5 +#define PE_DBGRESTART 6 +#define PE_CTIIRQ 7 +#define PE_PMUIRQ 8 +#define PE_DBGTRIGGER 9 +#define ETM_EXTOUT 10 +#define ETM_EXTIN 11 +#define SNK_FULL 12 +#define SNK_ACQCOMP 13 +#define SNK_FLUSHCOMP 14 +#define SNK_FLUSHIN 15 +#define SNK_TRIGIN 16 +#define STM_ASYNCOUT 17 +#define STM_TOUT_SPTE 18 +#define STM_TOUT_SW 19 +#define STM_TOUT_HETE 20 +#define STM_HWEVENT 21 +#define ELA_TSTART 22 +#define ELA_TSTOP 23 +#define ELA_DBGREQ 24 +#define CTI_TRIG_MAX 25 + +#endif /*_DT_BINDINGS_ARM_CORESIGHT_CTI_DT_H */ -- 2.17.1

4 years, 5 months

CONFIRM YOUR BANK DETAILS URGENT!!!

by Finance Dep

4 years, 5 months

[PATCH v6 13/15] docs: coresight: Update documentation for CoreSight to cover CTI.

by Mike Leach

Add new document covering CTI / CTM usage in CoreSight. Add section in coresight.rst introducing CTI and CTM modules with link to new document. Signed-off-by: Mike Leach <mike.leach(a)linaro.org> Reviewed-by: Suzuki K Poulose <suzuki.poulose(a)arm.com> --- .../trace/coresight/coresight-ect.rst | 211 ++++++++++++++++++ Documentation/trace/coresight/coresight.rst | 13 ++ 2 files changed, 224 insertions(+) create mode 100644 Documentation/trace/coresight/coresight-ect.rst diff --git a/Documentation/trace/coresight/coresight-ect.rst b/Documentation/trace/coresight/coresight-ect.rst new file mode 100644 index 000000000000..3e06588f24fa --- /dev/null +++ b/Documentation/trace/coresight/coresight-ect.rst @@ -0,0 +1,211 @@ +============================================= +CoreSight Embedded Cross Trigger (CTI & CTM). +============================================= + + :Author: Mike Leach <mike.leach(a)linaro.org> + :Date: November 2019 + +Hardware Description +-------------------- + +The CoreSight Cross Trigger Interface (CTI) is a hardware device that takes +individual input and output hardware signals known as triggers to and from +devices and interconnects them via the Cross Trigger Matrix (CTM) to other +devices via numbered channels, in order to propagate events between devices. + +e.g.:: + + 0000000 in_trigs ::::::: + 0 C 0----------->: : +======>(other CTI channel IO) + 0 P 0<-----------: : v + 0 U 0 out_trigs : : Channels ***** ::::::: + 0000000 : CTI :<=========>*CTM*<====>: CTI :---+ + ####### in_trigs : : (id 0-3) ***** ::::::: v + # ETM #----------->: : ^ ####### + # #<-----------: : +---# ETR # + ####### out_trigs ::::::: ####### + +The CTI driver enables the programming of the CTI to attach triggers to +channels. When an input trigger becomes active, the attached channel will +become active. Any output trigger attached to that channel will also +become active. The active channel is propagated to other CTIs via the CTM, +activating connected output triggers there, unless filtered by the CTI +channel gate. + +It is also possible to activate a channel using system software directly +programming registers in the CTI. + +The CTIs are registered by the system to be associated with CPUs and/or other +CoreSight devices on the trace data path. When these devices are enabled the +attached CTIs will also be enabled. By default/on power up the CTIs have +no programmed trigger/channel attachments, so will not affect the system +until explicitly programmed. + +The hardware trigger connections between CTIs and devices is implementation +defined, unless the CPU/ETM combination is a v8 architecture, in which case +the connections have an architecturally defined standard layout. + +The hardware trigger signals can also be connected to non-CoreSight devices +(e.g. UART), or be propagated off chip as hardware IO lines. + +All the CTI devices are associated with a CTM. On many systems there will be a +single effective CTM (one CTM, or multiple CTMs all interconnected), but it is +possible that systems can have nets of CTIs+CTM that are not interconnected by +a CTM to each other. On these systems a CTM index is declared to associate +CTI devices that are interconnected via a given CTM. + +Sysfs files and directories +--------------------------- + +The CTI devices appear on the existing CoreSight bus alongside the other +CoreSight devices:: + + >$ ls /sys/bus/coresight/devices + cti_cpu0 cti_cpu2 cti_sys0 etm0 etm2 funnel0 replicator0 tmc_etr0 + cti_cpu1 cti_cpu3 cti_sys1 etm1 etm3 funnel1 tmc_etf0 tpiu0 + +The ``cti_cpu<N>`` named CTIs are associated with a CPU, and any ETM used by +that core. the ``cti_sys<N>`` CTIs are general system infrastructure CTIs that +can be associated with other CoreSight devices, or other system hardware +capable of generating or using trigger signals.:: + + >$ ls /sys/bus/coresight/devices/etm0/cti_cpu0 + channels ctmid enable nr_trigger_cons mgmt power regs subsystem + triggers0 triggers1 uevent + +*Key file items are:-* + * ``enable``: enables/disables the CTI. + * ``ctmid`` : associated CTM - only relevant if system has multiple CTI+CTM + clusters that are not interconnected. + * ``nr_trigger_cons`` : total connections - triggers<N> directories. + +*Sub-directories:-* + * ``triggers<N>``: contains list of triggers for an individual connection. + * ``channels``: Contains the channel API - CTI main programming interface. + * ``regs``: Gives access to the raw programmable CTI regs. + * ``mgmt``: the standard CoreSight management registers. + + +triggers<N> directories +~~~~~~~~~~~~~~~~~~~~~~~ + +Individual trigger connection information. This describes trigger signals for +CoreSight and non-CoreSight connections. + +Each triggers directory has a set of parameters describing the triggers for +the connection. + + * ``name`` : name of connection + * ``in_signals`` : input trigger signal indexes used in this connection. + * ``in_types`` : functional types for in signals. + * ``out_signals`` : output trigger signals for this connection. + * ``out_types`` : functional types for out signals. + +e.g:: + + >$ ls ./cti_cpu0/triggers0/ + in_signals in_types name out_signals out_types + >$ cat ./cti_cpu0/triggers0/name + cpu0 + >$ cat ./cti_cpu0/triggers0/out_signals + 0-2 + >$ cat ./cti_cpu0/triggers0/out_types + pe_edbgreq pe_dbgrestart pe_ctiirq + >$ cat ./cti_cpu0/triggers0/in_signals + 0-1 + >$ cat ./cti_cpu0/triggers0/in_types + pe_dbgtrigger pe_pmuirq + +If a connection has zero signals in either the 'in' or 'out' triggers then +those parameters will be omitted. + +Channels API Directory +~~~~~~~~~~~~~~~~~~~~~~ + +This provides an easy way to attach triggers to channels, without needing +the multiple register operations that are required if manipulating the +'regs' sub-dir elements directly. + +A number of files provide this API:: + + >$ ls ./cti_sys0/channels/ + chan_clear chan_inuse chan_xtrigs_view trigin_detach + chan_free chan_pulse chan_xtrigs_view_sel trigout_attach + chan_gate_disable chan_set trig_filter_enable trigout_detach + chan_gate_enable chan_xtrigs_reset trigin_attach trigout_filtered + +Most access to these elements take the form:: + + echo <chan> [<trigger>] > /<device_path>/<operation> + +where the optional <trigger> is only needed for trigXX_attach | detach +operations. + +e.g.:: + + >$ echo 0 1 > ./cti_sys0/channels/trigout_attach + >$ echo 0 > ./cti_sys0/channels/chan_set + +Attaches trigout(1) to channel(0), then activates channel(0) generating a +set state on cti_sys0.trigout(1) + + +*API operations* + + * ``trigin_attach, trigout_attach``: Attach a channel to a trigger signal. + * ``trigin_detach, trigout_detach``: Detach a channel from a trigger signal. + * ``chan_set``: Set the channel - the set state will be propagated around + the CTM to other connected devices. + * ``chan_clear``: Clear the channel. + * ``chan_pulse``: Set the channel for a single CoreSight clock cycle. + * ``chan_gate_enable``: Write operation sets the CTI gate to propagate + (enable) the channel to other devices. This operation takes a channel + number. CTI gate is enabled for all channels by default at power up. Read + to list the currently enabled channels on the gate. + * ``chan_gate_disable``: Write channel number to disable gate for that + channel. + * ``chan_inuse``: Show the current channels attached to any signal + * ``chan_free``: Show channels with no attached signals. + * ``chan_xtrig_view``: write a channel number to select a channel to view, + read to show the cross triggers programmed for the selected channel. + * ``trig_filter_enable``: Defaults to enabled, disable to allow potentially + dangerous output signals to be set. + * ``trigout_filtered``: Trigger out signals that are prevented from being + set if filtering ``trig_filter_enable`` is enabled. One use is to prevent + accidental ``EDBGREQ`` signals stopping a core. + * ``chan_xtrigs_reset``: Write 1 to clear all channel / trigger programming. + Resets device hardware to default state. + + +The example below attaches input trigger index 1 to channel 2, and output +trigger index 6 to the same channel. It then examines the state of the +channel / trigger connections using the appropriate sysfs attributes. + +The settings mean that if either input trigger 1, or channel 2 go active then +trigger out 6 will go active. We then enable the CTI, and use the software +channel control to activate channel 2. We see the active channel on the +``choutstatus`` register and the active signal on the ``trigoutstatus`` +register. Finally clearing the channel removes this. + +e.g.:: + + .../cti_sys0/channels# echo 2 1 > trigin_attach + .../cti_sys0/channels# echo 2 6 > trigout_attach + .../cti_sys0/channels# cat chan_free + 0-1,3 + .../cti_sys0/channels# cat chan_inuse + 2 + .../cti_sys0/channels# echo 2 > chan_xtrigs_view + .../cti_sys0/channels# cat chan_xtrigs_view + [2] IN: 1 OUT: 6 + .../cti_sys0/# echo 1 > enable + .../cti_sys0/channels# echo 2 > chan_set + .../cti_sys0/channels# cat ../regs/choutstatus + 0x4 + .../cti_sys0/channels# cat ../regs/trigoutstatus + 0x40 + .../cti_sys0/channels# echo 2 > chan_clear + .../cti_sys0/channels# cat ../regs/trigoutstatus + 0x0 + .../cti_sys0/channels# cat ../regs/choutstatus + 0x0 diff --git a/Documentation/trace/coresight/coresight.rst b/Documentation/trace/coresight/coresight.rst index a566719f8e7e..108600ee1e12 100644 --- a/Documentation/trace/coresight/coresight.rst +++ b/Documentation/trace/coresight/coresight.rst @@ -491,8 +491,21 @@ interface provided for that purpose by the generic STM API:: Details on how to use the generic STM API can be found here:- :doc:`../stm` [#second]_. +The CTI & CTM Modules +--------------------- + +The CTI (Cross Trigger Interface) provides a set of trigger signals between +individual CTIs and components, and can propagate these between all CTIs via +channels on the CTM (Cross Trigger Matrix). + +A separate documentation file is provided to explain the use of these devices. +(:doc:`coresight-ect`) [#fourth]_. + + .. [#first] Documentation/ABI/testing/sysfs-bus-coresight-devices-stm .. [#second] Documentation/trace/stm.rst .. [#third] https://github.com/Linaro/perf-opencsd + +.. [#fourth] Documentation/trace/coresight/coresight-ect.rst -- 2.17.1

4 years, 5 months

[PATCH v6 11/15] dt-bindings: arm: Juno platform - add CTI entries to device tree.

by Mike Leach

Add in CTI entries for Juno r0, r1 and r2 to device tree entries. Signed-off-by: Mike Leach <mike.leach(a)linaro.org> --- arch/arm64/boot/dts/arm/juno-base.dtsi | 149 +++++++++++++++++++++- arch/arm64/boot/dts/arm/juno-cs-r1r2.dtsi | 31 ++++- arch/arm64/boot/dts/arm/juno-r1.dts | 25 ++++ arch/arm64/boot/dts/arm/juno-r2.dts | 25 ++++ arch/arm64/boot/dts/arm/juno.dts | 25 ++++ 5 files changed, 250 insertions(+), 5 deletions(-) diff --git a/arch/arm64/boot/dts/arm/juno-base.dtsi b/arch/arm64/boot/dts/arm/juno-base.dtsi index 1f3c80aafbd7..07d6395a2194 100644 --- a/arch/arm64/boot/dts/arm/juno-base.dtsi +++ b/arch/arm64/boot/dts/arm/juno-base.dtsi @@ -119,7 +119,7 @@ * The actual size is just 4K though 64K is reserved. Access to the * unmapped reserved region results in a DECERR response. */ - etf@20010000 { /* etf0 */ + etf_sys0: etf@20010000 { /* etf0 */ compatible = "arm,coresight-tmc", "arm,primecell"; reg = <0 0x20010000 0 0x1000>; @@ -143,7 +143,7 @@ }; }; - tpiu@20030000 { + tpiu_sys: tpiu@20030000 { compatible = "arm,coresight-tpiu", "arm,primecell"; reg = <0 0x20030000 0 0x1000>; @@ -196,7 +196,7 @@ }; }; - etr@20070000 { + etr_sys: etr@20070000 { compatible = "arm,coresight-tmc", "arm,primecell"; reg = <0 0x20070000 0 0x1000>; iommus = <&smmu_etr 0>; @@ -214,7 +214,7 @@ }; }; - stm@20100000 { + stm_sys: stm@20100000 { compatible = "arm,coresight-stm", "arm,primecell"; reg = <0 0x20100000 0 0x1000>, <0 0x28000000 0 0x1000000>; @@ -291,6 +291,18 @@ }; }; + cti0: cti@22020000 { + compatible = "arm,coresight-cti-v8-arch", "arm,coresight-cti", + "arm,primecell"; + reg = <0 0x22020000 0 0x1000>; + + clocks = <&soc_smc50mhz>; + clock-names = "apb_pclk"; + power-domains = <&scpi_devpd 0>; + + arm,cs-dev-assoc = <&etm0>; + }; + funnel@220c0000 { /* cluster0 funnel */ compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; reg = <0 0x220c0000 0 0x1000>; @@ -351,6 +363,18 @@ }; }; + cti1: cti@22120000 { + compatible = "arm,coresight-cti-v8-arch", "arm,coresight-cti", + "arm,primecell"; + reg = <0 0x22120000 0 0x1000>; + + clocks = <&soc_smc50mhz>; + clock-names = "apb_pclk"; + power-domains = <&scpi_devpd 0>; + + arm,cs-dev-assoc = <&etm1>; + }; + cpu_debug2: cpu-debug@23010000 { compatible = "arm,coresight-cpu-debug", "arm,primecell"; reg = <0x0 0x23010000 0x0 0x1000>; @@ -376,6 +400,18 @@ }; }; + cti2: cti@23020000 { + compatible = "arm,coresight-cti-v8-arch", "arm,coresight-cti", + "arm,primecell"; + reg = <0 0x23020000 0 0x1000>; + + clocks = <&soc_smc50mhz>; + clock-names = "apb_pclk"; + power-domains = <&scpi_devpd 0>; + + arm,cs-dev-assoc = <&etm2>; + }; + funnel@230c0000 { /* cluster1 funnel */ compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; reg = <0 0x230c0000 0 0x1000>; @@ -448,6 +484,18 @@ }; }; + cti3: cti@23120000 { + compatible = "arm,coresight-cti-v8-arch", "arm,coresight-cti", + "arm,primecell"; + reg = <0 0x23120000 0 0x1000>; + + clocks = <&soc_smc50mhz>; + clock-names = "apb_pclk"; + power-domains = <&scpi_devpd 0>; + + arm,cs-dev-assoc = <&etm3>; + }; + cpu_debug4: cpu-debug@23210000 { compatible = "arm,coresight-cpu-debug", "arm,primecell"; reg = <0x0 0x23210000 0x0 0x1000>; @@ -473,6 +521,18 @@ }; }; + cti4: cti@23220000 { + compatible = "arm,coresight-cti-v8-arch", "arm,coresight-cti", + "arm,primecell"; + reg = <0 0x23220000 0 0x1000>; + + clocks = <&soc_smc50mhz>; + clock-names = "apb_pclk"; + power-domains = <&scpi_devpd 0>; + + arm,cs-dev-assoc = <&etm4>; + }; + cpu_debug5: cpu-debug@23310000 { compatible = "arm,coresight-cpu-debug", "arm,primecell"; reg = <0x0 0x23310000 0x0 0x1000>; @@ -498,6 +558,87 @@ }; }; + cti5: cti@23320000 { + compatible = "arm,coresight-cti-v8-arch", "arm,coresight-cti", + "arm,primecell"; + reg = <0 0x23320000 0 0x1000>; + + clocks = <&soc_smc50mhz>; + clock-names = "apb_pclk"; + power-domains = <&scpi_devpd 0>; + + arm,cs-dev-assoc = <&etm5>; + }; + + cti@20020000 { /* sys_cti_0 */ + compatible = "arm,coresight-cti", "arm,primecell"; + reg = <0 0x20020000 0 0x1000>; + + clocks = <&soc_smc50mhz>; + clock-names = "apb_pclk"; + power-domains = <&scpi_devpd 0>; + + trig-conns@0 { + arm,trig-in-sigs=<2 3>; + arm,trig-in-types=<SNK_FULL SNK_ACQCOMP>; + arm,trig-out-sigs=<0 1>; + arm,trig-out-types=<SNK_FLUSHIN SNK_TRIGIN>; + arm,cs-dev-assoc = <&etr_sys>; + }; + + trig-conns@1 { + arm,trig-in-sigs=<0 1>; + arm,trig-in-types=<SNK_FULL SNK_ACQCOMP>; + arm,trig-out-sigs=<7 6>; + arm,trig-out-types=<SNK_FLUSHIN SNK_TRIGIN>; + arm,cs-dev-assoc = <&etf_sys0>; + }; + + trig-conns@2 { + arm,trig-in-sigs=<4 5 6 7>; + arm,trig-in-types=<STM_TOUT_SPTE STM_TOUT_SW + STM_TOUT_HETE STM_ASYNCOUT>; + arm,trig-out-sigs=<4 5>; + arm,trig-out-types=<STM_HWEVENT STM_HWEVENT>; + arm,cs-dev-assoc = <&stm_sys>; + }; + + trig-conns@3 { + arm,trig-out-sigs=<2 3>; + arm,trig-out-types=<SNK_FLUSHIN SNK_TRIGIN>; + arm,cs-dev-assoc = <&tpiu_sys>; + }; + }; + + cti@20110000 { /* sys_cti_1 */ + compatible = "arm,coresight-cti", "arm,primecell"; + reg = <0 0x20110000 0 0x1000>; + + clocks = <&soc_smc50mhz>; + clock-names = "apb_pclk"; + power-domains = <&scpi_devpd 0>; + + trig-conns@0 { + arm,trig-in-sigs=<0>; + arm,trig-in-types=<GEN_INTREQ>; + arm,trig-out-sigs=<0>; + arm,trig-out-types=<GEN_HALTREQ>; + arm,trig-conn-name = "sys_profiler"; + }; + + trig-conns@1 { + arm,trig-out-sigs=<2 3>; + arm,trig-out-types=<GEN_HALTREQ GEN_RESTARTREQ>; + arm,trig-conn-name = "watchdog"; + }; + + trig-conns@2 { + arm,trig-out-sigs=<1 6>; + arm,trig-out-types=<GEN_HALTREQ GEN_RESTARTREQ>; + arm,trig-conn-name = "g_counter"; + }; + }; + gpu: gpu@2d000000 { compatible = "arm,juno-mali", "arm,mali-t624"; reg = <0 0x2d000000 0 0x10000>; diff --git a/arch/arm64/boot/dts/arm/juno-cs-r1r2.dtsi b/arch/arm64/boot/dts/arm/juno-cs-r1r2.dtsi index eda3d9e18af6..308f4eee8b29 100644 --- a/arch/arm64/boot/dts/arm/juno-cs-r1r2.dtsi +++ b/arch/arm64/boot/dts/arm/juno-cs-r1r2.dtsi @@ -23,7 +23,7 @@ }; }; - etf@20140000 { /* etf1 */ + etf_sys1: etf@20140000 { /* etf1 */ compatible = "arm,coresight-tmc", "arm,primecell"; reg = <0 0x20140000 0 0x1000>; @@ -82,4 +82,33 @@ }; }; + + cti@20160000 { /* sys_cti_2 */ + compatible = "arm,coresight-cti", "arm,primecell"; + reg = <0 0x20160000 0 0x1000>; + + clocks = <&soc_smc50mhz>; + clock-names = "apb_pclk"; + power-domains = <&scpi_devpd 0>; + + trig-conns@0 { + arm,trig-in-sigs=<0 1>; + arm,trig-in-types=<SNK_FULL SNK_ACQCOMP>; + arm,trig-out-sigs=<0 1>; + arm,trig-out-types=<SNK_FLUSHIN SNK_TRIGIN>; + arm,cs-dev-assoc = <&etf_sys1>; + }; + + trig-conns@1 { + arm,trig-in-sigs=<2 3 4>; + arm,trig-in-types=<ELA_DBGREQ ELA_TSTART ELA_TSTOP>; + arm,trig-conn-name = "ela_clus_0"; + }; + + trig-conns@2 { + arm,trig-in-sigs=<5 6 7>; + arm,trig-in-types=<ELA_DBGREQ ELA_TSTART ELA_TSTOP>; + arm,trig-conn-name = "ela_clus_1"; + }; + }; }; diff --git a/arch/arm64/boot/dts/arm/juno-r1.dts b/arch/arm64/boot/dts/arm/juno-r1.dts index 5f290090b0cf..02aa51eb311d 100644 --- a/arch/arm64/boot/dts/arm/juno-r1.dts +++ b/arch/arm64/boot/dts/arm/juno-r1.dts @@ -9,6 +9,7 @@ /dts-v1/; #include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/arm/coresight-cti-dt.h> #include "juno-base.dtsi" #include "juno-cs-r1r2.dtsi" @@ -309,3 +310,27 @@ &cpu_debug5 { cpu = <&A53_3>; }; + +&cti0 { + cpu = <&A57_0>; +}; + +&cti1 { + cpu = <&A57_1>; +}; + +&cti2 { + cpu = <&A53_0>; +}; + +&cti3 { + cpu = <&A53_1>; +}; + +&cti4 { + cpu = <&A53_2>; +}; + +&cti5 { + cpu = <&A53_3>; +}; diff --git a/arch/arm64/boot/dts/arm/juno-r2.dts b/arch/arm64/boot/dts/arm/juno-r2.dts index 305300dd521c..75bb27c2d4dc 100644 --- a/arch/arm64/boot/dts/arm/juno-r2.dts +++ b/arch/arm64/boot/dts/arm/juno-r2.dts @@ -9,6 +9,7 @@ /dts-v1/; #include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/arm/coresight-cti-dt.h> #include "juno-base.dtsi" #include "juno-cs-r1r2.dtsi" @@ -315,3 +316,27 @@ &cpu_debug5 { cpu = <&A53_3>; }; + +&cti0 { + cpu = <&A72_0>; +}; + +&cti1 { + cpu = <&A72_1>; +}; + +&cti2 { + cpu = <&A53_0>; +}; + +&cti3 { + cpu = <&A53_1>; +}; + +&cti4 { + cpu = <&A53_2>; +}; + +&cti5 { + cpu = <&A53_3>; +}; diff --git a/arch/arm64/boot/dts/arm/juno.dts b/arch/arm64/boot/dts/arm/juno.dts index f00cffbd032c..dbc22e70b62c 100644 --- a/arch/arm64/boot/dts/arm/juno.dts +++ b/arch/arm64/boot/dts/arm/juno.dts @@ -9,6 +9,7 @@ /dts-v1/; #include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/arm/coresight-cti-dt.h> #include "juno-base.dtsi" / { @@ -295,3 +296,27 @@ &cpu_debug5 { cpu = <&A53_3>; }; + +&cti0 { + cpu = <&A57_0>; +}; + +&cti1 { + cpu = <&A57_1>; +}; + +&cti2 { + cpu = <&A53_0>; +}; + +&cti3 { + cpu = <&A53_1>; +}; + +&cti4 { + cpu = <&A53_2>; +}; + +&cti5 { + cpu = <&A53_3>; +}; -- 2.17.1

4 years, 5 months

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

CoreSight December 2019