[Flashbench] Transcend CF 4 GB 133x
Arnd Bergmann
arnd at arndb.de
Tue Jun 14 17:47:52 UTC 2011
Using a eSATA adapter:
arnd at wuerfel:~/flashbench$ sudo hdparm -I /dev/sde
/dev/sde:
CompactFlash ATA device
Model Number: TS4GCF133
Serial Number: 20101227 C2130907
Firmware Revision: 20100804
Standards:
Supported: 7
Likely used: 7
Configuration:
Logical max current
cylinders 7769 7769
heads 16 16
sectors/track 63 63
--
CHS current addressable sectors: 7831152
LBA user addressable sectors: 7831152
Logical/Physical Sector size: 512 bytes
device size with M = 1024*1024: 3823 MBytes
device size with M = 1000*1000: 4009 MBytes (4 GB)
cache/buffer size = 1 KBytes (type=DualPort)
Capabilities:
LBA, IORDY(can be disabled)
Standby timer values: spec'd by Vendor
R/W multiple sector transfer: Max = 1 Current = 0
Advanced power management level: disabled
DMA: mdma0 mdma1 mdma2 udma0 udma1 udma2 udma3 *udma4
Cycle time: min=120ns recommended=120ns
PIO: pio0 pio1 pio2 pio3 pio4
Cycle time: no flow control=120ns IORDY flow control=120ns
Commands/features:
Enabled Supported:
* SMART feature set
Security Mode feature set
Power Management feature set
Write cache
WRITE_BUFFER command
READ_BUFFER command
NOP cmd
* CFA feature set
Advanced Power Management feature set
Mandatory FLUSH_CACHE
* SMART self-test
* Gen1 signaling speed (1.5Gb/s)
* Host-initiated interface power management
* CFA advanced modes: pio5 *pio6 mdma3 mdma4
* CFA Power Level 1 (max 500mA)
Security:
Master password revision code = 65534
supported
not enabled
not locked
not frozen
not expired: security count
not supported: enhanced erase
2min for SECURITY ERASE UNIT.
Integrity word not set (found 0x8f00, expected 0xe1a5)
More information about the Flashbench-results
mailing list