HELP - Cannot boot Origen Board

Mon Mar 19 06:49:05 UTC 2012

Hi, could you paste your command to flash SD card here?

On 17 March 2012 03:53, Andrew Fraser <afraser at andyfraser.co.uk> wrote:

> I have just purchased an Origen Board - Full Package. I flashed the SD
> card with igen-ics-gcc46-samsunglt-stable-blob.img and placed it into the
> SD card slot. I flicked the power switch and pressed SWITCH then POWER and
> saw the board booting in terminal. However, after a short period of time
> LED4 turns off and I do not see the LCD light or show the Android screen.
> The output in terminal is given below. Is my board faulty or have I not
> flashed the correct image to the SD card ?****
>
> U-Boot 2011.06-01275-gd6186aa (Feb 17 2012 - 08:54:12) for ORIGEN****
>
> CPU: S5PC210 at 1000MHz****
>
> Board: ORIGEN
> DRAM: 1 GiB
> WARNING: Caches not enabled
> MMC: SAMSUNG SD/MMC: 0
> *** Warning - bad CRC, using default environment****
>
> In: serial
> Out: serial
> Err: serial
> Hit any key to stop autoboot: 0
> reading boot.scr****
>
> 397 bytes read
> Running bootscript from mmc0:2 ...
> ## Executing script at 42000000
> reading uImage****
>
> 4049424 bytes read
> reading uInitrd****
>
> 166156 bytes read
> ## Booting kernel from Legacy Image at 40007000 ...
> Image Name: Linux-3.0.4+
> Image Type: ARM Linux Kernel Image (uncompressed)
> Data Size: 4049360 Bytes = 3.9 MiB
> Load Address: 40008000
> Entry Point: 40008000
> Verifying Checksum ... OK
> ## Loading init Ramdisk from Legacy Image at 42000000 ...
> Image Name: Android Ramdisk Image
> Image Type: ARM Linux RAMDisk Image (gzip compressed)
> Data Size: 166092 Bytes = 162.2 KiB
> Load Address: 00000000
> Entry Point: 00000000
> Verifying Checksum ... OK
> Loading Kernel Image ... OK
> OK****
>
> Starting kernel ...****
>
> Uncompressing Linux... done, booting the kernel.
> <5>Linux version 3.0.4+ (jenkins-build at ip-10-140-6-146) (gcc version
> 4.6.3 20120201 (prerelease) (Linaro GCC 4.6-2012.02) ) #1 SMP PREEMPT Fri
> Feb 17 09:34:26 UTC 2012
> CPU: ARMv7 Processor [412fc091] revision 1 (ARMv7), cr=10c5387f
> CPU: VIPT nonaliasing data cache, VIPT aliasing instruction cache
> Machine: ORIGEN
> <4>Ignoring unrecognised tag 0x00000000
> <4>Ignoring unrecognised tag 0x00000000
> <4>Ignoring unrecognised tag 0x00000000
> <4>Ignoring unrecognised tag 0x00000000
> <5>Truncating RAM at 60000000-7fffffff to -6dffffff (vmalloc region
> overlap).
> <3>CMA reserve : jpeg, addr is 0x5e800000, size is 0x1800000
> <3>CMA reserve : fimc0, addr is 0x5e300000, size is 0x500000
> <3>CMA reserve : fimc1, addr is 0x5de00000, size is 0x500000
> <3>CMA reserve : fimc2, addr is 0x5d900000, size is 0x500000
> <3>CMA reserve : fimc3, addr is 0x5d400000, size is 0x500000
> <3>CMA reserve : fimd, addr is 0x5bc00000, size is 0x1800000
> <3>CMA reserve : common, addr is 0x57c00000, size is 0x4000000
> <3>CMA reserve : (null), addr is 0x57c00000, size is 0x0
> Memory policy: ECC disabled, Data cache writealloc
> CPU EXYNOS4210 (id 0x43210011)
> <7>exynos4_init_clocks: initializing clocks
> <6>S3C24XX Clocks, Copyright 2004 Simtec Electronics
> <3>s3c_register_clksrc: clock armclk has no registers set
> <3>mout_audss: bad source 0
> <7>exynos4_setup_clocks: registering clocks
> <7>exynos4_setup_clocks: xtal is 24000000
> <6>EXYNOS4: PLL settings, A=1000000000, M=800000000, E=96000000
> V=108000000<6>EXYNOS4: ARMCLK=1000000000, DMC=400000000, ACLK200=200000000
> ACLK100=100000000, ACLK160=160000000, ACLK133=133333333
> <6>uclk1: source is mout_mpll (6), rate is 100000000
> <6>uclk1: source is mout_mpll (6), rate is 100000000
> <6>uclk1: source is mout_mpll (6), rate is 100000000
> <6>uclk1: source is mout_mpll (6), rate is 100000000
> <6>sclk_pwm: source is ext_xtal (0), rate is 24000000
> <6>sclk_csis: source is xusbxti (1), rate is 0
> <6>sclk_csis: source is xusbxti (1), rate is 0
> <6>sclk_cam0: source is xusbxti (1), rate is 0
> <6>sclk_cam1: source is xusbxti (1), rate is 0
> <6>sclk_fimc: source is xusbxti (1), rate is 0
> <6>sclk_fimc: source is xusbxti (1), rate is 0
> <6>sclk_fimc: source is xusbxti (1), rate is 0
> <6>sclk_fimc: source is xusbxti (1), rate is 0
> <6>sclk_mixer: source is sclk_dac (0), rate is 24000000
> <6>sclk_fimd0: source is xusbxti (1), rate is 0
> <6>sclk_fimd1: source is xusbxti (1), rate is 0
> <6>sclk_sata: source is mout_mpll (0), rate is 133333333
> <6>sclk_spi: source is xusbxti (1), rate is 0
> <6>sclk_spi: source is mout_mpll (6), rate is 80000000
> <6>sclk_spi: source is xusbxti (1), rate is 0
> <6>sclk_fimg2d: source is mout_g2d0 (0), rate is 100000000
> <7>On node 0 totalpages: 188416
> <7> Normal zone: 1472 pages used for memmap
> <7> Normal zone: 0 pages reserved
> <7> Normal zone: 186944 pages, LIFO batch:31
> <6>PERCPU: Embedded 7 pages/cpu @c0f96000 s6528 r8192 d13952 u32768
> <7>pcpu-alloc: s6528 r8192 d13952 u32768 alloc=8*4096
> <7>pcpu-alloc: [0] 0 [0] 1
> Built 1 zonelists in Zone order, mobility grouping on. Total pages: 186944
> <5>Kernel command line: console=tty0 console=ttySAC2,115200n8 rootwait ro
> init=/init androidboot.console=ttySAC2 console=ttySAC2 root=/dev/mmcblk0p2
> ****
>
> <6>PID hash table entries: 4096 (order: 2, 16384 bytes)
> <6>Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
> <6>Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
> <6>Memory: 736MB = 736MB total
> <5>Memory: 601736k/601736k available, 151928k reserved, 0K highmem
> <5>Virtual kernel memory layout:
> vector : 0xffff0000 - 0xffff1000 ( 4 kB)
> fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
> DMA : 0xfe800000 - 0xffe00000 ( 22 MB)
> vmalloc : 0xee800000 - 0xf6000000 ( 120 MB)
> lowmem : 0xc0000000 - 0xee000000 ( 736 MB)
> modules : 0xbf000000 - 0xc0000000 ( 16 MB)
> .text : 0xc0008000 - 0xc078fd14 (7712 kB)
> .init : 0xc0790000 - 0xc07d5980 ( 279 kB)
> .data : 0xc07d6000 - 0xc0835930 ( 383 kB)
> .bss : 0xc0835954 - 0xc098bca8 (1369 kB)
> <6>Preemptible hierarchical RCU implementation.
> <6>NR_IRQS:624
> <6>sched_clock: 32 bits at 50MHz, resolution 20ns, wraps every 85899ms
> <6>Console: colour dummy device 80x30
> <6>console [tty0] enabled
> Linux version 3.0.4+ (jenkins-build at ip-10-140-6-146) (gcc version 4.6.3
> 20120201 (prerelease) (Linaro GCC 4.6-2012.02) ) #1 SMP PREEMPT Fri Feb 17
> 09:34:26 UTC 2012
> CPU: ARMv7 Processor [412fc091] revision 1 (ARMv7), cr=10c5387f
> CPU: VIPT nonaliasing data cache, VIPT aliasing instruction cache
> Machine: ORIGEN
> Ignoring unrecognised tag 0x00000000
> Ignoring unrecognised tag 0x00000000
> Ignoring unrecognised tag 0x00000000
> Ignoring unrecognised tag 0x00000000
> Truncating RAM at 60000000-7fffffff to -6dffffff (vmalloc region overlap).
> CMA reserve : jpeg, addr is 0x5e800000, size is 0x1800000
> CMA reserve : fimc0, addr is 0x5e300000, size is 0x500000
> CMA reserve : fimc1, addr is 0x5de00000, size is 0x500000
> CMA reserve : fimc2, addr is 0x5d900000, size is 0x500000
> CMA reserve : fimc3, addr is 0x5d400000, size is 0x500000
> CMA reserve : fimd, addr is 0x5bc00000, size is 0x1800000
> CMA reserve : common, addr is 0x57c00000, size is 0x4000000
> CMA reserve : (null), addr is 0x57c00000, size is 0x0
> Memory policy: ECC disabled, Data cache writealloc
> CPU EXYNOS4210 (id 0x43210011)
> S3C24XX Clocks, Copyright 2004 Simtec Electronics
> s3c_register_clksrc: clock armclk has no registers set
> mout_audss: bad source 0
> EXYNOS4: PLL settings, A=1000000000, M=800000000, E=96000000 V=108000000
> EXYNOS4: ARMCLK=1000000000, DMC=400000000, ACLK200=200000000
> ACLK100=100000000, ACLK160=160000000, ACLK133=133333333
> uclk1: source is mout_mpll (6), rate is 100000000
> uclk1: source is mout_mpll (6), rate is 100000000
> uclk1: source is mout_mpll (6), rate is 100000000
> uclk1: source is mout_mpll (6), rate is 100000000
> sclk_pwm: source is ext_xtal (0), rate is 24000000
> sclk_csis: source is xusbxti (1), rate is 0
> sclk_csis: source is xusbxti (1), rate is 0
> sclk_cam0: source is xusbxti (1), rate is 0
> sclk_cam1: source is xusbxti (1), rate is 0
> sclk_fimc: source is xusbxti (1), rate is 0
> sclk_fimc: source is xusbxti (1), rate is 0
> sclk_fimc: source is xusbxti (1), rate is 0
> sclk_fimc: source is xusbxti (1), rate is 0
> sclk_mixer: source is sclk_dac (0), rate is 24000000
> sclk_fimd0: source is xusbxti (1), rate is 0
> sclk_fimd1: source is xusbxti (1), rate is 0
> sclk_sata: source is mout_mpll (0), rate is 133333333
> sclk_spi: source is xusbxti (1), rate is 0
> sclk_spi: source is mout_mpll (6), rate is 80000000
> sclk_spi: source is xusbxti (1), rate is 0
> sclk_fimg2d: source is mout_g2d0 (0), rate is 100000000
> PERCPU: Embedded 7 pages/cpu @c0f96000 s6528 r8192 d13952 u32768
> Built 1 zonelists in Zone order, mobility grouping on. Total pages: 186944
> Kernel command line: console=tty0 console=ttySAC2,115200n8 rootwait ro
> init=/init androidboot.console=ttySAC2 console=ttySAC2 root=/dev/mmcblk0p2
> ****
>
> PID hash table entries: 4096 (order: 2, 16384 bytes)
> Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
> Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
> Memory: 736MB = 736MB total
> Memory: 601736k/601736k available, 151928k reserved, 0K highmem
> Virtual kernel memory layout:
> vector : 0xffff0000 - 0xffff1000 ( 4 kB)
> fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
> DMA : 0xfe800000 - 0xffe00000 ( 22 MB)
> vmalloc : 0xee800000 - 0xf6000000 ( 120 MB)
> lowmem : 0xc0000000 - 0xee000000 ( 736 MB)
> modules : 0xbf000000 - 0xc0000000 ( 16 MB)
> .text : 0xc0008000 - 0xc078fd14 (7712 kB)
> .init : 0xc0790000 - 0xc07d5980 ( 279 kB)
> .data : 0xc07d6000 - 0xc0835930 ( 383 kB)
> .bss : 0xc0835954 - 0xc098bca8 (1369 kB)
> Preemptible hierarchical RCU implementation.
> NR_IRQS:624
> sched_clock: 32 bits at 50MHz, resolution 20ns, wraps every 85899ms
> Console: colour dummy device 80x30
> console <tty0] enabled
> 6>console [ttySAC2] enabled
> console [tt<SAC2] enabled
> 6>Calibrating delay loop... Calibrating delay loop... <c>1992.29 BogoMIPS
> (lpj=4980736)
> 1992.29 BogoMIPS<(lpj=4980736)
> 6>pid_max: default: 32768 minimum: 301
> pid_max: default: 32768 minimum: 301
> <6>Mount-cache hash table entries: 512
> Mount-cache hash table entries: 512
> <6>CPU: Testing write buffer coherency: CPU: Testing write buffer
> coherency: ok
> ok
> <6>ftrace: allocating 19856 entries in 59 pages
> ftrace: allocating 19856 entries in 59 pages
> <6>CPU0: thread -1, cpu 0, socket 9, mpidr 80000900
> CPU0: thread -1, cpu 0, socket 9, <pidr 80000900
> 6>Calibrating local timer... Calibrating local timer... 249.93MHz.
> 249.93MHz.
> <6>hw perfevents: enabled with ARMv7 Cortex-A9 PMU driver, 7 counters
> available
> hw perfevents: enabled with ARMv7 Cortex-A9 PMU driver, 7 counters
> available
> <6>L310 cache controller enabled
> L310 cache cont<oller enabled
> 6>l2x0: 16 ways, CACHE_ID 0x4100c4c5, AUX_CTRL 0x7e470001, Cache size:
> 1048576 B
> l2x0: 16 ways, CACHE_ID 0x4100c4c5, AUX_CTRL 0x7e470001, Cache size:
> 1048576 B
> CPU1: Booted secondary processor
> <2>CPU1: Unknown IPI message 0x1****
>
> _______________________________________________
> linaro-android mailing list
> linaro-android at lists.linaro.org
> http://lists.linaro.org/mailman/listinfo/linaro-android
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.linaro.org/pipermail/linaro-android/attachments/20120319/a254628b/attachment.html>