[Linaro-mm-sig] [PATCHv21 16/16] ARM: Samsung: use CMA for 2 memory banks for s5p-mfc device

Marek Szyprowski m.szyprowski at samsung.com
Fri Feb 10 17:32:31 UTC 2012


Replace custom memory bank initialization using memblock_reserve and
dma_declare_coherent with a single call to CMA's dma_declare_contiguous.

Signed-off-by: Marek Szyprowski <m.szyprowski at samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park at samsung.com>
Acked-by: Arnd Bergmann <arnd at arndb.de>
---
 arch/arm/plat-s5p/dev-mfc.c |   51 ++++++-------------------------------------
 1 files changed, 7 insertions(+), 44 deletions(-)

diff --git a/arch/arm/plat-s5p/dev-mfc.c b/arch/arm/plat-s5p/dev-mfc.c
index a30d36b..fcb8400 100644
--- a/arch/arm/plat-s5p/dev-mfc.c
+++ b/arch/arm/plat-s5p/dev-mfc.c
@@ -14,6 +14,7 @@
 #include <linux/interrupt.h>
 #include <linux/platform_device.h>
 #include <linux/dma-mapping.h>
+#include <linux/dma-contiguous.h>
 #include <linux/memblock.h>
 #include <linux/ioport.h>
 
@@ -22,52 +23,14 @@
 #include <plat/irqs.h>
 #include <plat/mfc.h>
 
-struct s5p_mfc_reserved_mem {
-	phys_addr_t	base;
-	unsigned long	size;
-	struct device	*dev;
-};
-
-static struct s5p_mfc_reserved_mem s5p_mfc_mem[2] __initdata;
-
 void __init s5p_mfc_reserve_mem(phys_addr_t rbase, unsigned int rsize,
 				phys_addr_t lbase, unsigned int lsize)
 {
-	int i;
-
-	s5p_mfc_mem[0].dev = &s5p_device_mfc_r.dev;
-	s5p_mfc_mem[0].base = rbase;
-	s5p_mfc_mem[0].size = rsize;
-
-	s5p_mfc_mem[1].dev = &s5p_device_mfc_l.dev;
-	s5p_mfc_mem[1].base = lbase;
-	s5p_mfc_mem[1].size = lsize;
-
-	for (i = 0; i < ARRAY_SIZE(s5p_mfc_mem); i++) {
-		struct s5p_mfc_reserved_mem *area = &s5p_mfc_mem[i];
-		if (memblock_remove(area->base, area->size)) {
-			printk(KERN_ERR "Failed to reserve memory for MFC device (%ld bytes at 0x%08lx)\n",
-			       area->size, (unsigned long) area->base);
-			area->base = 0;
-		}
-	}
-}
-
-static int __init s5p_mfc_memory_init(void)
-{
-	int i;
-
-	for (i = 0; i < ARRAY_SIZE(s5p_mfc_mem); i++) {
-		struct s5p_mfc_reserved_mem *area = &s5p_mfc_mem[i];
-		if (!area->base)
-			continue;
+	if (dma_declare_contiguous(&s5p_device_mfc_r.dev, rsize, rbase, 0))
+		printk(KERN_ERR "Failed to reserve memory for MFC device (%u bytes at 0x%08lx)\n",
+		       rsize, (unsigned long) rbase);
 
-		if (dma_declare_coherent_memory(area->dev, area->base,
-				area->base, area->size,
-				DMA_MEMORY_MAP | DMA_MEMORY_EXCLUSIVE) == 0)
-			printk(KERN_ERR "Failed to declare coherent memory for MFC device (%ld bytes at 0x%08lx)\n",
-			       area->size, (unsigned long) area->base);
-	}
-	return 0;
+	if (dma_declare_contiguous(&s5p_device_mfc_l.dev, lsize, lbase, 0))
+		printk(KERN_ERR "Failed to reserve memory for MFC device (%u bytes at 0x%08lx)\n",
+		       rsize, (unsigned long) rbase);
 }
-device_initcall(s5p_mfc_memory_init);
-- 
1.7.1.569.g6f426




More information about the Linaro-mm-sig mailing list