Hi Alan,
What you did seem correct. I have not tried to duplicate the issue. But interestingly, I found a bug around the MMC driver using GCC to build the BeagleBoard UEFI firmware (the firmware was crashing when booting Linux).
I fixed the bug in the revision 12160. It could fix the bug you found.
Thanks,
Olivier
From: boot-architecture-bounces@lists.linaro.org [mailto:boot-architecture-bounces@lists.linaro.org] On Behalf Of Alan Chuang
Sent: 12 August 2011 06:19
To: boot-architecture@lists.linaro.org
Subject: Booting Linux from UEFI on Beagleboard Qemu
Hi all:
I just started to play around with ARM UEFI stuff and has issue booting into Linux when trying to test the EDK2 software on Qemu. This seems like the right place to ask. I followed the instruction in (http://edk2.svn.sourceforge.net/viewvc/edk2/trunk/edk2/BeagleBoardPkg/readme.txt?revision=11997) including downloading the specific version of binaries / tools. When trying to run UEFI (both in NOR flash method as well as SD card method), UEFI started successfully. However, I kept on getting “Did not find Linux kernel” error when trying to boot Linux. From EBL, I can see the zImage file is present (cd fs1:; dir). The zImage file is basically vmlinuz-2.6.35-1008-linaro-omap from the hwpack. I even tried to extract zImage from uImage, but the result is still the same.
I am wondering if anyone has run into the same issue and can give me a hint on what else to try.
Thanks,
Alan Chuang
---------------- Console Log -------------------
The default boot selection will start in 1 seconds
CMD0 response: 0
MmcStatus: 18000
CMD5 fails. Not an SDIO card.
CMD8 success. CMD8 response: 1CE
Card is SD2.0
CMD55 success. CMD55 response: 120
SD card detected. ACMD41 OCR: C0FFFF00
High capacity card.
CMD2 response: EF006219 1DEADBE 454D5521 AA585951
CMD3 response: RCA 4567
CMD9 response: A400000 FFF7F80 5B590000 400E0032
Card type: 4, BlockSize: 200, NumBlocks: 400000
MaxDataTransferRate: 0x32, Frequency: 25000 KHz, ClockFrequencySelect: 4
SD Memory Card set to 4-bit mode
SD Card Media Change on Handle 0x8792E290
SD Card ReinstallProtocolInterface ()
ERROR: Did not find Linux kernel.
[1] Linux from SD
- VenHw(B615F1F5-5088-43CD-809C-A16E52487D00)/HD(1,MBR,0x00000000,0x3F,0x19FC0)/zImage
- LoaderType: 1
- Arguments:
[2] EBL
[3] Boot Manager
Start: 3
[1] Add Boot Device Entry
[2] Update Boot Device Entry
[3] Remove Boot Device Entry
[4] Return to main menu
Choice: 2
[1] Linux from SD
- VenHw(B615F1F5-5088-43CD-809C-A16E52487D00)/HD(1,MBR,0x00000000,0x3F,0x19FC0)/zImage
- Arguments:
Update entry: 1
File path of the EFI Application or the kernel: zImage
Has FDT support? [y/n] n
Arguments to pass to the binary:
Description for this new Entry: Linux from SD
[1] Add Boot Device Entry
[2] Update Boot Device Entry
[3] Remove Boot Device Entry
[4] Return to main menu
Choice: 4
[1] Linux from SD
- VenHw(B615F1F5-5088-43CD-809C-A16E52487D00)/HD(1,MBR,0x00000000,0x3F,0x19FC0)/zImage
- LoaderType: 1
- Arguments:
[2] EBL
[3] Boot Manager
Start: 2
EhcCreateUsb2Hc: capability length 0
EhcDriverBindingStart: failed to create USB2_HC
add-symbol-file /home/alanc/UEFI/src2/edk2/Build/BeagleBoard/DEBUG_ARMGCC/ARM/EmbeddedPkg/Ebl/Ebl/DEBUG/Ebl.dll 0x85BCD240
Embedded Boot Loader (EBL) prototype. Built at 09:56:17 on Aug 12 2011
THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN 'AS IS' BASIS,
WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
Please send feedback to edk2-devel@lists.sourceforge.net
BeagleEdk2 >device
Firmware Volume Devices:
fv0: 0x80008000 - 0x80087FFF : 0x00080000
fv1: 0x87C4A000 - 0x87E0751F : 0x001BD520
File System Devices:
fs0: SemihostFs:
fs1: boot:
Block IO Devices:
blk0: Size = 0x10000000
blk1: Removable Size = 0x80000000
blk2: fs1: Removable Partition Size = 0x33F8000
blk3: Removable Partition Size = 0x7CC00000
BeagleEdk2 >devicepaths
EhcCreateUsb2Hc: capability length 0
EhcDriverBindingStart: failed to create USB2_HC
[0x87A00790] MemoryMapped(0xB,0x80008000,0x80087FFF)
[0x87A00490] MemoryMapped(0xB,0x87C4A000,0x87E0751F)
[0x87975B10] VenHw(6696936D-3637-467C-87CB-14EA8248948C)/Uart(115200,8,N,1)
[0x8796B910] VenHw(4D00EF14-C4E0-426B-81B7-30A00A14AAD6)
[0x8792E290] VenHw(B615F1F5-5088-43CD-809C-A16E52487D00)
[0x8792D390] PciRoot(0x0)/Pci(0x0,0x0)
[0x87918890] VenHw(C5B9C74A-6D72-4719-99AB-C59F199091EB)
[0x8790A890] VenHw(B615F1F5-5088-43CD-809C-A16E52487D00)/HD(1,MBR,0x00000000,0x3F,0x19FC0)
[0x8790A590] VenHw(B615F1F5-5088-43CD-809C-A16E52487D00)/HD(2,MBR,0x00000000,0x1A000,0x3E6000)
BeagleEdk2 >exit
remove-symbol-file /home/alanc/UEFI/src2/edk2/Build/BeagleBoard/DEBUG_ARMGCC/ARM/EmbeddedPkg/Ebl/Ebl/DEBUG/Ebl.dll 0x85BCD240
[1] Linux from SD
- VenHw(B615F1F5-5088-43CD-809C-A16E52487D00)/HD(1,MBR,0x00000000,0x3F,0x19FC0)/zImage
- LoaderType: 1
- Arguments:
[2] EBL
[3] Boot Manager
Start:
-- IMPORTANT NOTICE: The contents of this email and any attachments are confidential and may also be privileged. If you are not the intended recipient, please notify the sender immediately and do not disclose the contents to any other person, use it for any purpose, or store or copy the information in any medium. Thank you.