On Wed, 15 Mar 2017 15:39:47 +0000
Mike Leach <mike.leach@linaro.org> wrote:
> Checked gcc version and ran perf a few times
> ==============================================================
> root@linaro-developer:/home/mleach/perf-tools# strings -a perf | grep
> "GCC: ("
> GCC: (Linaro GCC 6.2-2016.11) 6.2.1 20161016
> root@linaro-developer:/home/mleach/perf-tools#
>
> root@linaro-developer:/home/mleach/perf-tools# taskset -c 2 ./perf record
> -e cs_etm/@20070000.etr/u --per-thread taskset -c 2 uname
> Linux
> [ perf record: Woken up 2 times to write data ]
> [ perf record: Captured and wrote 0.077 MB perf.data ]
> root@linaro-developer:/home/mleach/perf-tools#
> root@linaro-developer:/home/mleach/perf-tools# taskset -c 2 ./perf record
> -e cs_etm/@20070000.etr/u --per-thread taskset -c 2 uname
> Linux
> [ perf record: Woken up 1 times to write data ]
> [ perf record: Captured and wrote 0.077 MB perf.data ]
> root@linaro-developer:/home/mleach/perf-tools# taskset -c 2 ./perf record
> -e cs_etm/@20070000.etr/u --per-thread taskset -c 2 uname
> Linux
> [ perf record: Woken up 2 times to write data ]
> [ perf record: Captured and wrote 0.077 MB perf.data ]
> root@linaro-developer:/home/mleach/perf-tools#
> ==============================================================
>
> Worked fine.
I like to include dmesg | grep gcc because sometimes I myself make
sloppy mistakes copying the kernel image around, but OK, I should have
said I gave it a lot of time before runs: several minutes.
> so....I'm back on the funnel / trace amount and core differences.
> taskset -c 2 -> selects cpu 2 -> A53(0) on both juno-r1 and juno-r2. So why
> on your system is the funnel for the A72 cluster (cpu 0-1) being activated.
> if I use taskset -c 0 (or 1) then I get the A57 cluster funnel activated as
> expected. (2-5 gets the A53 cluster funnel)
>
> This seems to be indicative of some .dts issue on your system / r2. Nothing
> immediately obvious in the .dts that I can see.
Using the device tree compiler to show all the differences, like so:
$ dtc -I dtb -O dts -s juno.dtb > juno.dts
$ dtc -I dtb -O dts -s juno-r2.dtb > juno-r2.dts
$ diff -u juno.dts juno-r2.dts
We see the cpus have been renumbered such that on r2, taskset -c 2
references an A-72 (it actually happens between r0 and r1, diff r1 r2
is a simple a57->a72 rename), and phandles that coresight components
reference also change, e.g., the 0x3d phandle that the etf@20140000
references used to point to the old sysctl@020000, but that node's
phandle gets changed to 0x3c. Below is the full diff; is a dts
patch for coresight on r1/r2 in order?
I still think there's more to it since you were able to see the
inconsistent behaviour between two runs problem on r0.
Thanks,
Kim
--- juno.dts 2017-03-15 13:00:49.180455032 -0500
+++ juno-r2.dts 2017-03-15 12:41:32.568144442 -0500
@@ -3,10 +3,10 @@
/ {
#address-cells = <0x2>;
#size-cells = <0x2>;
- compatible = "arm,juno", "arm,vexpress";
+ compatible = "arm,juno-r2", "arm,juno", "arm,vexpress";
dma-ranges = <0x0 0x0 0x0 0x0 0x100 0x0>;
interrupt-parent = <0x1>;
- model = "ARM Juno development board (r0)";
+ model = "ARM Juno development board (r2)";
aliases {
serial0 = "/uart@7ff80000";
@@ -21,8 +21,8 @@
clock-frequency = <0x2dc6c00>;
clock-output-names = "clk48mhz";
compatible = "fixed-clock";
- linux,phandle = <0x36>;
- phandle = <0x36>;
+ linux,phandle = <0x35>;
+ phandle = <0x35>;
};
clk50mhz {
@@ -43,109 +43,109 @@
cluster0 {
core0 {
- cpu = <0xf>;
+ cpu = <0xe>;
};
core1 {
- cpu = <0x14>;
+ cpu = <0x13>;
};
};
cluster1 {
core0 {
- cpu = <0x16>;
+ cpu = <0x15>;
};
core1 {
- cpu = <0x1d>;
+ cpu = <0x1c>;
};
core2 {
- cpu = <0x1f>;
+ cpu = <0x1e>;
};
core3 {
- cpu = <0x21>;
+ cpu = <0x20>;
};
};
};
cpu@0 {
capacity-dmips-mhz = <0x400>;
- clocks = <0x3f 0x0>;
- compatible = "arm,cortex-a57", "arm,armv8";
- cpu-idle-states = <0x40 0x41>;
+ clocks = <0x44 0x0>;
+ compatible = "arm,cortex-a72", "arm,armv8";
+ cpu-idle-states = <0x45 0x46>;
device_type = "cpu";
enable-method = "psci";
- linux,phandle = <0xf>;
- next-level-cache = <0x3e>;
- phandle = <0xf>;
+ linux,phandle = <0xe>;
+ next-level-cache = <0x43>;
+ phandle = <0xe>;
reg = <0x0 0x0>;
};
cpu@1 {
capacity-dmips-mhz = <0x400>;
- clocks = <0x3f 0x0>;
- compatible = "arm,cortex-a57", "arm,armv8";
- cpu-idle-states = <0x40 0x41>;
+ clocks = <0x44 0x0>;
+ compatible = "arm,cortex-a72", "arm,armv8";
+ cpu-idle-states = <0x45 0x46>;
device_type = "cpu";
enable-method = "psci";
- linux,phandle = <0x14>;
- next-level-cache = <0x3e>;
- phandle = <0x14>;
+ linux,phandle = <0x13>;
+ next-level-cache = <0x43>;
+ phandle = <0x13>;
reg = <0x0 0x1>;
};
cpu@100 {
- capacity-dmips-mhz = <0x242>;
- clocks = <0x3f 0x1>;
+ capacity-dmips-mhz = <0x1e5>;
+ clocks = <0x44 0x1>;
compatible = "arm,cortex-a53", "arm,armv8";
- cpu-idle-states = <0x40 0x41>;
+ cpu-idle-states = <0x45 0x46>;
device_type = "cpu";
enable-method = "psci";
- linux,phandle = <0x16>;
- next-level-cache = <0x42>;
- phandle = <0x16>;
+ linux,phandle = <0x15>;
+ next-level-cache = <0x47>;
+ phandle = <0x15>;
reg = <0x0 0x100>;
};
cpu@101 {
- capacity-dmips-mhz = <0x242>;
- clocks = <0x3f 0x1>;
+ capacity-dmips-mhz = <0x1e5>;
+ clocks = <0x44 0x1>;
compatible = "arm,cortex-a53", "arm,armv8";
- cpu-idle-states = <0x40 0x41>;
+ cpu-idle-states = <0x45 0x46>;
device_type = "cpu";
enable-method = "psci";
- linux,phandle = <0x1d>;
- next-level-cache = <0x42>;
- phandle = <0x1d>;
+ linux,phandle = <0x1c>;
+ next-level-cache = <0x47>;
+ phandle = <0x1c>;
reg = <0x0 0x101>;
};
cpu@102 {
- capacity-dmips-mhz = <0x242>;
- clocks = <0x3f 0x1>;
+ capacity-dmips-mhz = <0x1e5>;
+ clocks = <0x44 0x1>;
compatible = "arm,cortex-a53", "arm,armv8";
- cpu-idle-states = <0x40 0x41>;
+ cpu-idle-states = <0x45 0x46>;
device_type = "cpu";
enable-method = "psci";
- linux,phandle = <0x1f>;
- next-level-cache = <0x42>;
- phandle = <0x1f>;
+ linux,phandle = <0x1e>;
+ next-level-cache = <0x47>;
+ phandle = <0x1e>;
reg = <0x0 0x102>;
};
cpu@103 {
- capacity-dmips-mhz = <0x242>;
- clocks = <0x3f 0x1>;
+ capacity-dmips-mhz = <0x1e5>;
+ clocks = <0x44 0x1>;
compatible = "arm,cortex-a53", "arm,armv8";
- cpu-idle-states = <0x40 0x41>;
+ cpu-idle-states = <0x45 0x46>;
device_type = "cpu";
enable-method = "psci";
- linux,phandle = <0x21>;
- next-level-cache = <0x42>;
- phandle = <0x21>;
+ linux,phandle = <0x20>;
+ next-level-cache = <0x47>;
+ phandle = <0x20>;
reg = <0x0 0x103>;
};
@@ -157,10 +157,10 @@
compatible = "arm,idle-state";
entry-latency-us = <0x190>;
exit-latency-us = <0x4b0>;
- linux,phandle = <0x41>;
+ linux,phandle = <0x46>;
local-timer-stop;
min-residency-us = <0x9c4>;
- phandle = <0x41>;
+ phandle = <0x46>;
};
cpu-sleep-0 {
@@ -168,23 +168,23 @@
compatible = "arm,idle-state";
entry-latency-us = <0x12c>;
exit-latency-us = <0x4b0>;
- linux,phandle = <0x40>;
+ linux,phandle = <0x45>;
local-timer-stop;
min-residency-us = <0x7d0>;
- phandle = <0x40>;
+ phandle = <0x45>;
};
};
l2-cache0 {
compatible = "cache";
- linux,phandle = <0x3e>;
- phandle = <0x3e>;
+ linux,phandle = <0x43>;
+ phandle = <0x43>;
};
l2-cache1 {
compatible = "cache";
- linux,phandle = <0x42>;
- phandle = <0x42>;
+ linux,phandle = <0x47>;
+ phandle = <0x47>;
};
};
@@ -193,18 +193,18 @@
#dma-channels = <0x8>;
#dma-requests = <0x20>;
clock-names = "apb_pclk";
- clocks = <0x2c>;
+ clocks = <0x2b>;
compatible = "arm,pl330", "arm,primecell";
interrupts = <0x0 0x58 0x4 0x0 0x59 0x4 0x0 0x5a 0x4 0x0 0x5b 0x4 0x0 0x5c 0x4 0x0 0x6c 0x4 0x0 0x6d 0x4 0x0 0x6e 0x4 0x0 0x6f 0x4>;
- iommus = <0x2b 0x0 0x2b 0x1 0x2b 0x2 0x2b 0x3 0x2b 0x4 0x2b 0x5 0x2b 0x6 0x2b 0x7 0x2b 0x8>;
+ iommus = <0x2a 0x0 0x2a 0x1 0x2a 0x2 0x2a 0x3 0x2a 0x4 0x2a 0x5 0x2a 0x6 0x2a 0x7 0x2a 0x8>;
reg = <0x0 0x7ff00000 0x0 0x1000>;
};
ehci@7ffc0000 {
- clocks = <0x36>;
+ clocks = <0x35>;
compatible = "generic-ehci";
interrupts = <0x0 0x75 0x4>;
- iommus = <0x35 0x0>;
+ iommus = <0x34 0x0>;
reg = <0x0 0x7ffc0000 0x0 0x10000>;
};
@@ -234,28 +234,62 @@
reg = <0x0>;
endpoint {
- linux,phandle = <0x25>;
- phandle = <0x25>;
+ linux,phandle = <0x41>;
+ phandle = <0x41>;
remote-endpoint = <0x6>;
};
};
};
};
+ etf@20140000 {
+ clock-names = "apb_pclk";
+ clocks = <0x4>;
+ compatible = "arm,coresight-tmc", "arm,primecell";
+ power-domains = <0x3 0x0>;
+ reg = <0x0 0x20140000 0x0 0x1000>;
+
+ ports {
+ #address-cells = <0x1>;
+ #size-cells = <0x0>;
+
+ port@0 {
+ reg = <0x0>;
+
+ endpoint {
+ linux,phandle = <0x3d>;
+ phandle = <0x3d>;
+ remote-endpoint = <0x3e>;
+ slave-mode;
+ };
+ };
+
+ port@1 {
+ reg = <0x0>;
+
+ endpoint {
+ linux,phandle = <0x42>;
+ phandle = <0x42>;
+ remote-endpoint = <0x3f>;
+ };
+ };
+ };
+ };
+
etm@22040000 {
clock-names = "apb_pclk";
clocks = <0x4>;
compatible = "arm,coresight-etm4x", "arm,primecell";
- cpu = <0xf>;
+ cpu = <0xe>;
power-domains = <0x3 0x0>;
reg = <0x0 0x22040000 0x0 0x1000>;
port {
endpoint {
- linux,phandle = <0x12>;
- phandle = <0x12>;
- remote-endpoint = <0x10>;
+ linux,phandle = <0x11>;
+ phandle = <0x11>;
+ remote-endpoint = <0xf>;
};
};
};
@@ -264,16 +298,16 @@
clock-names = "apb_pclk";
clocks = <0x4>;
compatible = "arm,coresight-etm4x", "arm,primecell";
- cpu = <0x14>;
+ cpu = <0x13>;
power-domains = <0x3 0x0>;
reg = <0x0 0x22140000 0x0 0x1000>;
port {
endpoint {
- linux,phandle = <0x13>;
- phandle = <0x13>;
- remote-endpoint = <0x15>;
+ linux,phandle = <0x12>;
+ phandle = <0x12>;
+ remote-endpoint = <0x14>;
};
};
};
@@ -282,16 +316,16 @@
clock-names = "apb_pclk";
clocks = <0x4>;
compatible = "arm,coresight-etm4x", "arm,primecell";
- cpu = <0x16>;
+ cpu = <0x15>;
power-domains = <0x3 0x0>;
reg = <0x0 0x23040000 0x0 0x1000>;
port {
endpoint {
- linux,phandle = <0x19>;
- phandle = <0x19>;
- remote-endpoint = <0x17>;
+ linux,phandle = <0x18>;
+ phandle = <0x18>;
+ remote-endpoint = <0x16>;
};
};
};
@@ -300,16 +334,16 @@
clock-names = "apb_pclk";
clocks = <0x4>;
compatible = "arm,coresight-etm4x", "arm,primecell";
- cpu = <0x1d>;
+ cpu = <0x1c>;
power-domains = <0x3 0x0>;
reg = <0x0 0x23140000 0x0 0x1000>;
port {
endpoint {
- linux,phandle = <0x1a>;
- phandle = <0x1a>;
- remote-endpoint = <0x1e>;
+ linux,phandle = <0x19>;
+ phandle = <0x19>;
+ remote-endpoint = <0x1d>;
};
};
};
@@ -318,16 +352,16 @@
clock-names = "apb_pclk";
clocks = <0x4>;
compatible = "arm,coresight-etm4x", "arm,primecell";
- cpu = <0x1f>;
+ cpu = <0x1e>;
power-domains = <0x3 0x0>;
reg = <0x0 0x23240000 0x0 0x1000>;
port {
endpoint {
- linux,phandle = <0x1b>;
- phandle = <0x1b>;
- remote-endpoint = <0x20>;
+ linux,phandle = <0x1a>;
+ phandle = <0x1a>;
+ remote-endpoint = <0x1f>;
};
};
};
@@ -336,16 +370,16 @@
clock-names = "apb_pclk";
clocks = <0x4>;
compatible = "arm,coresight-etm4x", "arm,primecell";
- cpu = <0x21>;
+ cpu = <0x20>;
power-domains = <0x3 0x0>;
reg = <0x0 0x23340000 0x0 0x1000>;
port {
endpoint {
- linux,phandle = <0x1c>;
- phandle = <0x1c>;
- remote-endpoint = <0x22>;
+ linux,phandle = <0x1b>;
+ phandle = <0x1b>;
+ remote-endpoint = <0x21>;
};
};
};
@@ -354,16 +388,16 @@
clock-names = "apb_pclk";
clocks = <0x4>;
compatible = "arm,coresight-tmc", "arm,primecell";
- iommus = <0xc 0x0>;
+ iommus = <0xb 0x0>;
power-domains = <0x3 0x0>;
reg = <0x0 0x20070000 0x0 0x1000>;
port {
endpoint {
- linux,phandle = <0x24>;
- phandle = <0x24>;
- remote-endpoint = <0xd>;
+ linux,phandle = <0x23>;
+ phandle = <0x23>;
+ remote-endpoint = <0xc>;
slave-mode;
};
};
@@ -394,8 +428,8 @@
reg = <0x0>;
endpoint {
- linux,phandle = <0x11>;
- phandle = <0x11>;
+ linux,phandle = <0x10>;
+ phandle = <0x10>;
remote-endpoint = <0x9>;
slave-mode;
};
@@ -405,20 +439,87 @@
reg = <0x1>;
endpoint {
- linux,phandle = <0x18>;
- phandle = <0x18>;
+ linux,phandle = <0x17>;
+ phandle = <0x17>;
remote-endpoint = <0xa>;
slave-mode;
};
};
+ };
+ };
- port@3 {
- reg = <0x2>;
+ funnel@20130000 {
+ clock-names = "apb_pclk";
+ clocks = <0x4>;
+ compatible = "arm,coresight-funnel", "arm,primecell";
+ power-domains = <0x3 0x0>;
+ reg = <0x0 0x20130000 0x0 0x1000>;
+
+ ports {
+ #address-cells = <0x1>;
+ #size-cells = <0x0>;
+
+ port@0 {
+ reg = <0x0>;
+
+ endpoint {
+ linux,phandle = <0x3e>;
+ phandle = <0x3e>;
+ remote-endpoint = <0x3d>;
+ };
+ };
+
+ port@1 {
+ reg = <0x0>;
+
+ endpoint {
+ linux,phandle = <0xd>;
+ phandle = <0xd>;
+ slave-mode;
+ };
+ };
+ };
+ };
+
+ funnel@20150000 {
+ clock-names = "apb_pclk";
+ clocks = <0x4>;
+ compatible = "arm,coresight-funnel", "arm,primecell";
+ power-domains = <0x3 0x0>;
+ reg = <0x0 0x20150000 0x0 0x1000>;
+
+ ports {
+ #address-cells = <0x1>;
+ #size-cells = <0x0>;
+
+ port@0 {
+ reg = <0x0>;
+
+ endpoint {
+ linux,phandle = <0x24>;
+ phandle = <0x24>;
+ remote-endpoint = <0x40>;
+ };
+ };
+
+ port@1 {
+ reg = <0x0>;
+
+ endpoint {
+ linux,phandle = <0x6>;
+ phandle = <0x6>;
+ remote-endpoint = <0x41>;
+ slave-mode;
+ };
+ };
+
+ port@2 {
+ reg = <0x1>;
endpoint {
- linux,phandle = <0xe>;
- phandle = <0xe>;
- remote-endpoint = <0xb>;
+ linux,phandle = <0x3f>;
+ phandle = <0x3f>;
+ remote-endpoint = <0x42>;
slave-mode;
};
};
@@ -442,7 +543,7 @@
endpoint {
linux,phandle = <0x9>;
phandle = <0x9>;
- remote-endpoint = <0x11>;
+ remote-endpoint = <0x10>;
};
};
@@ -450,9 +551,9 @@
reg = <0x0>;
endpoint {
- linux,phandle = <0x10>;
- phandle = <0x10>;
- remote-endpoint = <0x12>;
+ linux,phandle = <0xf>;
+ phandle = <0xf>;
+ remote-endpoint = <0x11>;
slave-mode;
};
};
@@ -461,9 +562,9 @@
reg = <0x1>;
endpoint {
- linux,phandle = <0x15>;
- phandle = <0x15>;
- remote-endpoint = <0x13>;
+ linux,phandle = <0x14>;
+ phandle = <0x14>;
+ remote-endpoint = <0x12>;
slave-mode;
};
};
@@ -487,7 +588,7 @@
endpoint {
linux,phandle = <0xa>;
phandle = <0xa>;
- remote-endpoint = <0x18>;
+ remote-endpoint = <0x17>;
};
};
@@ -495,9 +596,9 @@
reg = <0x0>;
endpoint {
- linux,phandle = <0x17>;
- phandle = <0x17>;
- remote-endpoint = <0x19>;
+ linux,phandle = <0x16>;
+ phandle = <0x16>;
+ remote-endpoint = <0x18>;
slave-mode;
};
};
@@ -506,9 +607,9 @@
reg = <0x1>;
endpoint {
- linux,phandle = <0x1e>;
- phandle = <0x1e>;
- remote-endpoint = <0x1a>;
+ linux,phandle = <0x1d>;
+ phandle = <0x1d>;
+ remote-endpoint = <0x19>;
slave-mode;
};
};
@@ -517,9 +618,9 @@
reg = <0x2>;
endpoint {
- linux,phandle = <0x20>;
- phandle = <0x20>;
- remote-endpoint = <0x1b>;
+ linux,phandle = <0x1f>;
+ phandle = <0x1f>;
+ remote-endpoint = <0x1a>;
slave-mode;
};
};
@@ -528,9 +629,9 @@
reg = <0x3>;
endpoint {
- linux,phandle = <0x22>;
- phandle = <0x22>;
- remote-endpoint = <0x1c>;
+ linux,phandle = <0x21>;
+ phandle = <0x21>;
+ remote-endpoint = <0x1b>;
slave-mode;
};
};
@@ -539,36 +640,36 @@
hdlcd@7ff50000 {
clock-names = "pxlclk";
- clocks = <0x2e 0x3>;
+ clocks = <0x2d 0x3>;
compatible = "arm,hdlcd";
interrupts = <0x0 0x5d 0x4>;
- iommus = <0x2d 0x0>;
+ iommus = <0x2c 0x0>;
reg = <0x0 0x7ff50000 0x0 0x1000>;
port {
hdlcd1-endpoint {
- linux,phandle = <0x34>;
- phandle = <0x34>;
- remote-endpoint = <0x2f>;
+ linux,phandle = <0x33>;
+ phandle = <0x33>;
+ remote-endpoint = <0x2e>;
};
};
};
hdlcd@7ff60000 {
clock-names = "pxlclk";
- clocks = <0x2e 0x3>;
+ clocks = <0x2d 0x3>;
compatible = "arm,hdlcd";
interrupts = <0x0 0x55 0x4>;
- iommus = <0x30 0x0>;
+ iommus = <0x2f 0x0>;
reg = <0x0 0x7ff60000 0x0 0x1000>;
port {
hdlcd0-endpoint {
- linux,phandle = <0x33>;
- phandle = <0x33>;
- remote-endpoint = <0x31>;
+ linux,phandle = <0x32>;
+ phandle = <0x32>;
+ remote-endpoint = <0x30>;
};
};
};
@@ -590,9 +691,9 @@
port {
tda998x-0-endpoint {
- linux,phandle = <0x31>;
- phandle = <0x31>;
- remote-endpoint = <0x33>;
+ linux,phandle = <0x30>;
+ phandle = <0x30>;
+ remote-endpoint = <0x32>;
};
};
};
@@ -604,9 +705,9 @@
port {
tda998x-1-endpoint {
- linux,phandle = <0x2f>;
- phandle = <0x2f>;
- remote-endpoint = <0x34>;
+ linux,phandle = <0x2e>;
+ phandle = <0x2e>;
+ remote-endpoint = <0x33>;
};
};
};
@@ -626,9 +727,9 @@
v2m@0 {
compatible = "arm,gic-v2m-frame";
- linux,phandle = <0x26>;
+ linux,phandle = <0x25>;
msi-controller;
- phandle = <0x26>;
+ phandle = <0x25>;
reg = <0x0 0x0 0x0 0x1000>;
};
};
@@ -639,8 +740,8 @@
compatible = "arm,mmu-401", "arm,smmu-v1";
dma-coherent;
interrupts = <0x0 0x28 0x4 0x0 0x28 0x4>;
- linux,phandle = <0x27>;
- phandle = <0x27>;
+ linux,phandle = <0x26>;
+ phandle = <0x26>;
reg = <0x0 0x2b500000 0x0 0x10000>;
status = "disabled";
};
@@ -651,8 +752,8 @@
compatible = "arm,mmu-401", "arm,smmu-v1";
dma-coherent;
interrupts = <0x0 0x2a 0x4 0x0 0x2a 0x4>;
- linux,phandle = <0xc>;
- phandle = <0xc>;
+ linux,phandle = <0xb>;
+ phandle = <0xb>;
power-domains = <0x3 0x0>;
reg = <0x0 0x2b600000 0x0 0x10000>;
status = "disabled";
@@ -664,8 +765,8 @@
compatible = "arm,mmu-401", "arm,smmu-v1";
dma-coherent;
interrupts = <0x0 0x5f 0x4 0x0 0x5f 0x4>;
- linux,phandle = <0x2b>;
- phandle = <0x2b>;
+ linux,phandle = <0x2a>;
+ phandle = <0x2a>;
reg = <0x0 0x7fb00000 0x0 0x10000>;
status = "disabled";
};
@@ -675,8 +776,8 @@
#iommu-cells = <0x1>;
compatible = "arm,mmu-401", "arm,smmu-v1";
interrupts = <0x0 0x63 0x4 0x0 0x63 0x4>;
- linux,phandle = <0x2d>;
- phandle = <0x2d>;
+ linux,phandle = <0x2c>;
+ phandle = <0x2c>;
reg = <0x0 0x7fb10000 0x0 0x10000>;
status = "disabled";
};
@@ -686,8 +787,8 @@
#iommu-cells = <0x1>;
compatible = "arm,mmu-401", "arm,smmu-v1";
interrupts = <0x0 0x61 0x4 0x0 0x61 0x4>;
- linux,phandle = <0x30>;
- phandle = <0x30>;
+ linux,phandle = <0x2f>;
+ phandle = <0x2f>;
reg = <0x0 0x7fb20000 0x0 0x10000>;
status = "disabled";
};
@@ -698,8 +799,8 @@
compatible = "arm,mmu-401", "arm,smmu-v1";
dma-coherent;
interrupts = <0x0 0x65 0x4 0x0 0x65 0x4>;
- linux,phandle = <0x35>;
- phandle = <0x35>;
+ linux,phandle = <0x34>;
+ phandle = <0x34>;
reg = <0x0 0x7fb30000 0x0 0x10000>;
status = "disabled";
};
@@ -724,16 +825,16 @@
compatible = "arm,mhu", "arm,primecell";
interrupt-names = "mhu_lpri_rx", "mhu_hpri_rx";
interrupts = <0x0 0x24 0x4 0x0 0x23 0x4>;
- linux,phandle = <0x28>;
- phandle = <0x28>;
+ linux,phandle = <0x27>;
+ phandle = <0x27>;
reg = <0x0 0x2b1f0000 0x0 0x1000>;
};
ohci@7ffb0000 {
- clocks = <0x36>;
+ clocks = <0x35>;
compatible = "generic-ohci";
interrupts = <0x0 0x74 0x4>;
- iommus = <0x35 0x0>;
+ iommus = <0x34 0x0>;
reg = <0x0 0x7ffb0000 0x0 0x10000>;
};
@@ -747,24 +848,24 @@
dma-coherent;
interrupt-map = <0x0 0x0 0x0 0x1 0x1 0x0 0x0 0x0 0x88 0x4 0x0 0x0 0x0 0x2 0x1 0x0 0x0 0x0 0x89 0x4 0x0 0x0 0x0 0x3 0x1 0x0 0x0 0x0 0x8a 0x4 0x0 0x0 0x0 0x4 0x1 0x0 0x0 0x0 0x8b 0x4>;
interrupt-map-mask = <0x0 0x0 0x0 0x7>;
- iommu-map = <0x0 0x27 0x0 0x1>;
+ iommu-map = <0x0 0x26 0x0 0x1>;
iommu-map-mask = <0x0>;
linux,pci-domain = <0x0>;
- msi-parent = <0x26>;
+ msi-parent = <0x25>;
ranges = <0x1000000 0x0 0x0 0x0 0x5f800000 0x0 0x800000 0x2000000 0x0 0x50000000 0x0 0x50000000 0x0 0x8000000 0x42000000 0x40 0x0 0x40 0x0 0x1 0x0>;
reg = <0x0 0x40000000 0x0 0x10000000>;
- status = "disabled";
+ status = "okay";
};
pmu_a53 {
compatible = "arm,cortex-a53-pmu";
- interrupt-affinity = <0x16 0x1d 0x1f 0x21>;
+ interrupt-affinity = <0x15 0x1c 0x1e 0x20>;
interrupts = <0x0 0x12 0x4 0x0 0x16 0x4 0x0 0x1a 0x4 0x0 0x1e 0x4>;
};
- pmu_a57 {
- compatible = "arm,cortex-a57-pmu";
- interrupt-affinity = <0xf 0x14>;
+ pmu_a72 {
+ compatible = "arm,cortex-a72-pmu";
+ interrupt-affinity = <0xe 0x13>;
interrupts = <0x0 0x2 0x4 0x0 0x6 0x4>;
};
@@ -787,8 +888,8 @@
clock-frequency = <0x17d78400>;
clock-output-names = "faxi_clk";
compatible = "fixed-clock";
- linux,phandle = <0x2c>;
- phandle = <0x2c>;
+ linux,phandle = <0x2b>;
+ phandle = <0x2b>;
};
refclk7273800hz {
@@ -796,8 +897,8 @@
clock-frequency = <0x6efd48>;
clock-output-names = "juno:uartclk";
compatible = "fixed-clock";
- linux,phandle = <0x32>;
- phandle = <0x32>;
+ linux,phandle = <0x31>;
+ phandle = <0x31>;
};
replicator@20120000 {
@@ -817,7 +918,7 @@
endpoint {
linux,phandle = <0x7>;
phandle = <0x7>;
- remote-endpoint = <0x23>;
+ remote-endpoint = <0x22>;
};
};
@@ -825,9 +926,9 @@
reg = <0x1>;
endpoint {
- linux,phandle = <0xd>;
- phandle = <0xd>;
- remote-endpoint = <0x24>;
+ linux,phandle = <0xc>;
+ phandle = <0xc>;
+ remote-endpoint = <0x23>;
};
};
@@ -835,9 +936,9 @@
reg = <0x0>;
endpoint {
- linux,phandle = <0x6>;
- phandle = <0x6>;
- remote-endpoint = <0x25>;
+ linux,phandle = <0x40>;
+ phandle = <0x40>;
+ remote-endpoint = <0x24>;
slave-mode;
};
};
@@ -846,8 +947,8 @@
scpi {
compatible = "arm,scpi";
- mboxes = <0x28 0x1>;
- shmem = <0x29>;
+ mboxes = <0x27 0x1>;
+ shmem = <0x28>;
clocks {
compatible = "arm,scpi-clocks";
@@ -857,8 +958,8 @@
clock-indices = <0x3>;
clock-output-names = "pxlclk";
compatible = "arm,scpi-variable-clocks";
- linux,phandle = <0x2e>;
- phandle = <0x2e>;
+ linux,phandle = <0x2d>;
+ phandle = <0x2d>;
};
scpi-dvfs {
@@ -866,8 +967,8 @@
clock-indices = <0x0 0x1 0x2>;
clock-output-names = "atlclk", "aplclk", "gpuclk";
compatible = "arm,scpi-dvfs-clocks";
- linux,phandle = <0x3f>;
- phandle = <0x3f>;
+ linux,phandle = <0x44>;
+ phandle = <0x44>;
};
};
@@ -882,8 +983,8 @@
sensors {
#thermal-sensor-cells = <0x1>;
compatible = "arm,scpi-sensors";
- linux,phandle = <0x2a>;
- phandle = <0x2a>;
+ linux,phandle = <0x29>;
+ phandle = <0x29>;
};
};
@@ -901,8 +1002,8 @@
clock-frequency = <0x16e3600>;
clock-output-names = "juno_mb:clk24mhz";
compatible = "fixed-clock";
- linux,phandle = <0x3c>;
- phandle = <0x3c>;
+ linux,phandle = <0x3b>;
+ phandle = <0x3b>;
};
clk25mhz {
@@ -910,8 +1011,8 @@
clock-frequency = <0x17d7840>;
clock-output-names = "juno_mb:clk25mhz";
compatible = "fixed-clock";
- linux,phandle = <0x38>;
- phandle = <0x38>;
+ linux,phandle = <0x37>;
+ phandle = <0x37>;
};
motherboard {
@@ -926,7 +1027,7 @@
ranges;
ethernet@2,00000000 {
-