On 19/01/2024 04:22, Tao Zhang wrote:

Add property "qcom,cmb-elem-size" to support CMB(Continuous
Multi-Bit) element for TPDM. The associated aggregator will read
this size before it is enabled. CMB element size currently only
supports 32-bit and 64-bit.

Signed-off-by: Tao Zhang <quic_taozha@quicinc.com>
Signed-off-by: Mao Jinlong <quic_jinlmao@quicinc.com>
---
 .../bindings/arm/qcom,coresight-tpdm.yaml     | 27 +++++++++++++++++++
 1 file changed, 27 insertions(+)

diff --git a/Documentation/devicetree/bindings/arm/qcom,coresight-tpdm.yaml b/Documentation/devicetree/bindings/arm/qcom,coresight-tpdm.yaml
index 61ddc3b5b247..507a5f887097 100644
--- a/Documentation/devicetree/bindings/arm/qcom,coresight-tpdm.yaml
+++ b/Documentation/devicetree/bindings/arm/qcom,coresight-tpdm.yaml
@@ -52,6 +52,15 @@ properties:
     $ref: /schemas/types.yaml#/definitions/uint8
     enum: [32, 64]
 
+  qcom,cmb-element-size:
+    description:
+      Specifies the CMB(Continuous Multi-Bit) element size supported by
+      the monitor. The associated aggregator will read this size before it
+      is enabled. CMB element size currently only supports 8-bit, 32-bit
+      and 64-bit.
+    $ref: /schemas/types.yaml#/definitions/uint8
+    enum: [8, 32, 64]

Is this in bits? If so, then qcom,cmb-element-bits or something similar.
I don't quite get what is "an element" here, but I assume you do, so you
will come with reasonable name.

https://github.com/devicetree-org/dt-schema/blob/main/dtschema/schemas/property-units.yaml

Yes, the unit of this element size is bit. This element size can be understood as that a

CMB data set consists of values that are all N-bit binary vectors where N is 8, 32, or

64 bits. How about if we use "qcom,cmb-element-bits" here instead of "qcom,cmb-element-size"?

+
   qcom,dsb-msrs-num:
     description:
       Specifies the number of DSB(Discrete Single Bit) MSR(mux select register)
@@ -110,4 +119,22 @@ examples:
       };
     };
 
+    tpdm@6c29000 {

You should explain why you need new example, so reviewers will not have
to go back to previous discussions to ask the same question over and
over again.

+      compatible = "qcom,coresight-tpdm", "arm,primecell";
+      reg = <0x06c29000 0x1000>;
+
+      qcom,cmb-element-size = /bits/ 8 <64>;
+
+      clocks = <&aoss_qmp>;
+      clock-names = "apb_pclk";
+
+      out-ports {
+        port {
+          tpdm_ipcc_out_funnel_center: endpoint {
+            remote-endpoint =
+              <&funnel_center_in_tpdm_ipcc>;

Drop unneeded wrapping / line break.

Sure, I will update in the next patch series.

Best,

Tao

Best regards,
Krzysztof