On Thu, 16 Mar 2017 12:20:37 +0000
Mike Leach <mike.leach@linaro.org> wrote:

> On 15 March 2017 at 23:27, Kim Phillips <kim.phillips@arm.com> wrote:
>

> > Either way, if I use taskset -c 0 - for the A53 - I still see the
> > failure, and on first try with gcc4.9-built binaries:
> >
> > root@juno:~# dmesg | grep gcc
> > [    0.000000] Linux version 4.11.0-rc1-g0d15341 (kim@dupont) (gcc
> > version 4.9.4 20151028 (prerelease) (Linaro GCC 4.9-2016.02) ) #3 SMP
> > PREEMPT Tue Mar 14 22:41:34 CDT 2017
> > root@juno:~# taskset -c 0 ./perf record -e cs_etm/@20070000.etr/u
> > --per-thread taskset -c 0 uname
> > [ 1727.185799] coresight-replicator-qcom 20120000.replicator: REPLICATOR
> > enabled
> > [ 1727.192885] coresight-funnel 20150000.funnel: FUNNEL inport 0 enabled
> > [ 1727.199278] coresight-tmc 20010000.etf: TMC-ETF enabled
> > [ 1727.204460] coresight-funnel 20040000.funnel: FUNNEL inport 1 enabled
> > [ 1727.210848] coresight-funnel 230c0000.funnel: FUNNEL inport 0 enabled
> > [ 1727.217714] coresight-funnel 230c0000.funnel: FUNNEL inport 0 disabled
> > [ 1727.224183] coresight-funnel 20040000.funnel: FUNNEL inport 1 disabled
> > [ 1727.230666] coresight-tmc 20010000.etf: TMC disabled
> > [ 1727.235585] coresight-funnel 20150000.funnel: FUNNEL inport 0 disabled
> > [ 1727.242049] coresight-replicator-qcom 20120000.replicator: REPLICATOR
> > disabled
> > [ 1727.249217] coresight-tmc 20070000.etr: TMC-ETR disabled
> > [ 1727.254992] coresight-replicator-qcom 20120000.replicator: REPLICATOR
> > enabled
> > [ 1727.262065] coresight-funnel 20150000.funnel: FUNNEL inport 0 enabled
> > [ 1727.268456] coresight-tmc 20010000.etf: TMC-ETF enabled
> > [ 1727.273636] coresight-funnel 20040000.funnel: FUNNEL inport 1 enabled
> > [ 1727.280022] coresight-funnel 230c0000.funnel: FUNNEL inport 0 enabled
> > [ 1727.286840] coresight-funnel 230c0000.funnel: FUNNEL inport 0 disabled
> > [ 1727.293308] coresight-funnel 20040000.funnel: FUNNEL inport 1 disabled
> > [ 1727.299790] coresight-tmc 20010000.etf: TMC disabled
> > [ 1727.304708] coresight-funnel 20150000.funnel: FUNNEL inport 0 disabled
> > [ 1727.311171] coresight-replicator-qcom 20120000.replicator: REPLICATOR
> > disabled
> > [ 1727.318339] coresight-tmc 20070000.etr: TMC-ETR disabled
> > [ 1727.324087] coresight-replicator-qcom 20120000.replicator: REPLICATOR
> > enabled
> > [ 1727.331160] coresight-funnel 20150000.funnel: FUNNEL inport 0 enabled
> > [ 1727.337551] coresight-tmc 20010000.etf: TMC-ETF enabled
> > [ 1727.342730] coresight-funnel 20040000.funnel: FUNNEL inport 1 enabled
> > [ 1727.349116] coresight-funnel 230c0000.funnel: FUNNEL inport 0 enabled
> > [ 1727.369918] coresight-funnel 230c0000.funnel: FUNNEL inport 0 disabled
> > [ 1727.376387] coresight-funnel 20040000.funnel: FUNNEL inport 1 disabled
> > [ 1727.382871] coresight-tmc 20010000.etf: TMC disabled
> > [ 1727.387790] coresight-funnel 20150000.funnel: FUNNEL inport 0 disabled
> > [ 1727.394254] coresight-replicator-qcom 20120000.replicator: REPLICATOR
> > disabled
> > [ 1727.401422] coresight-tmc 20070000.etr: TMC-ETR disabled
> > [ 1727.407207] coresight-replicator-qcom 20120000.replicator: REPLICATOR
> > enabled
> > [ 1727.414281] coresight-funnel 20150000.funnel: FUNNEL inport 0 enabled
> > [ 1727.420672] coresight-tmc 20010000.etf: TMC-ETF enabled
> > [ 1727.425851] coresight-funnel 20040000.funnel: FUNNEL inport 1 enabled
> > [ 1727.432237] coresight-funnel 230c0000.funnel: FUNNEL inport 0 enabled
> > [ 1727.439054] coresight-funnel 230c0000.funnel: FUNNEL inport 0 disabled
> > [ 1727.445522] coresight-funnel 20040000.funnel: FUNNEL inport 1 disabled
> > [ 1727.452006] coresight-tmc 20010000.etf: TMC disabled
> > [ 1727.456924] coresight-funnel 20150000.funnel: FUNNEL inport 0 disabled
> > [ 1727.463388] coresight-replicator-qcom 20120000.replicator: REPLICATOR
> > disabled
> > [ 1727.470556] coresight-tmc 20070000.etr: TMC-ETR disabled
> > [ 1727.476382] coresight-replicator-qcom 20120000.replicator: REPLICATOR
> > enabled
> > [ 1727.483456] coresight-funnel 20150000.funnel: FUNNEL inport 0 enabled
> > [ 1727.489847] coresight-tmc 20010000.etf: TMC-ETF enabled
> > [ 1727.495027] coresight-funnel 20040000.funnel: FUNNEL inport 1 enabled
> > [ 1727.501413] coresight-funnel 230c0000.funnel: FUNNEL inport 0 enabled
> > [ 1727.508244] coresight-funnel 230c0000.funnel: FUNNEL inport 0 disabled
> > [ 1727.514713] coresight-funnel 20040000.funnel: FUNNEL inport 1 disabled
> > [ 1727.521196] coresight-tmc 20010000.etf: TMC disabled
> > [ 1727.526114] coresight-funnel 20150000.funnel: FUNNEL inport 0 disabled
> > [ 1727.532577] coresight-replicator-qcom 20120000.replicator: REPLICATOR
> > disabled
> > [ 1727.539745] coresight-tmc 20070000.etr: TMC-ETR disabled
> > [ 1727.545526] coresight-replicator-qcom 20120000.replicator: REPLICATOR
> > enabled
> > [ 1727.552600] coresight-funnel 20150000.funnel: FUNNEL inport 0 enabled
> > [ 1727.558990] coresight-tmc 20010000.etf: TMC-ETF enabled
> > [ 1727.564169] coresight-funnel 20040000.funnel: FUNNEL inport 1 enabled
> > [ 1727.570556] coresight-funnel 230c0000.funnel: FUNNEL inport 0 enabled
> > [ 1727.577390] coresight-funnel 230c0000.funnel: FUNNEL inport 0 disabled
> > [ 1727.583858] coresight-funnel 20040000.funnel: FUNNEL inport 1 disabled
> > [ 1727.590340] coresight-tmc 20010000.etf: TMC disabled
> > [ 1727.595259] coresight-funnel 20150000.funnel: FUNNEL inport 0 disabled
> > [ 1727.601722] coresight-replicator-qcom 20120000.replicator: REPLICATOR
> > disabled
> > [ 1727.608890] coresight-tmc 20070000.etr: TMC-ETR disabled
> > [ 1727.614653] coresight-replicator-qcom 20120000.replicator: REPLICATOR
> > enabled
> > [ 1727.621727] coresight-funnel 20150000.funnel: FUNNEL inport 0 enabled
> > [ 1727.628117] coresight-tmc 20010000.etf: TMC-ETF enabled
> > [ 1727.633297] coresight-funnel 20040000.funnel: FUNNEL inport 1 enabled
> > [ 1727.639683] coresight-funnel 230c0000.funnel: FUNNEL inport 0 enabled
> > [ 1727.646495] coresight-funnel 230c0000.funnel: FUNNEL inport 0 disabled
> > [ 1727.652963] coresight-funnel 20040000.funnel: FUNNEL inport 1 disabled
> > [ 1727.659446] coresight-tmc 20010000.etf: TMC disabled
> > [ 1727.664364] coresight-funnel 20150000.funnel: FUNNEL inport 0 disabled
> > [ 1727.670828] coresight-replicator-qcom 20120000.replicator: REPLICATOR
> > disabled
> > [ 1727.677995] coresight-tmc 20070000.etr: TMC-ETR disabled
> > [ 1727.683740] coresight-replicator-qcom 20120000.replicator: REPLICATOR
> > enabled
> > [ 1727.690813] coresight-funnel 20150000.funnel: FUNNEL inport 0 enabled
> > [ 1727.697203] coresight-tmc 20010000.etf: TMC-ETF enabled
> > [ 1727.702383] coresight-funnel 20040000.funnel: FUNNEL inport 1 enabled
> > [ 1727.708769] coresight-funnel 230c0000.funnel: FUNNEL inport 0 enabled
> > [ 1727.715581] coresight-funnel 230c0000.funnel: FUNNEL inport 0 disabled
> > [ 1727.722049] coresight-funnel 20040000.funnel: FUNNEL inport 1 disabled
> > [ 1727.728532] coresight-tmc 20010000.etf: TMC disabled
> > [ 1727.733450] coresight-funnel 20150000.funnel: FUNNEL inport 0 disabled
> > [ 1727.739915] coresight-replicator-qcom 20120000.replicator: REPLICATOR
> > disabled
> > [ 1727.747083] coresight-tmc 20070000.etr: TMC-ETR disabled
> > [ 1727.752831] coresight-replicator-qcom 20120000.replicator: REPLICATOR
> > enabled
> > [ 1727.759904] coresight-funnel 20150000.funnel: FUNNEL inport 0 enabled
> > [ 1727.766294] coresight-tmc 20010000.etf: TMC-ETF enabled
> > [ 1727.771473] coresight-funnel 20040000.funnel: FUNNEL inport 1 enabled
> > [ 1727.777860] coresight-funnel 230c0000.funnel: FUNNEL inport 0 enabled
> > [ 1727.785106] coresight-funnel 230c0000.funnel: FUNNEL inport 0 disabled
> > [ 1727.791576] coresight-funnel 20040000.funnel: FUNNEL inport 1 disabled
> > [ 1727.798059] coresight-tmc 20010000.etf: TMC disabled
> > [ 1727.802978] coresight-funnel 20150000.funnel: FUNNEL inport 0 disabled
> > [ 1727.809442] coresight-replicator-qcom 20120000.replicator: REPLICATOR
> > disabled
> > [ 1727.816610] coresight-tmc 20070000.etr: TMC-ETR disabled
> > [ 1727.822396] coresight-replicator-qcom 20120000.replicator: REPLICATOR
> > enabled
> > [ 1727.829470] coresight-funnel 20150000.funnel: FUNNEL inport 0 enabled
> > [ 1727.835860] coresight-tmc 20010000.etf: TMC-ETF enabled
> > [ 1727.841040] coresight-funnel 20040000.funnel: FUNNEL inport 1 enabled
> > [ 1727.847427] coresight-funnel 230c0000.funnel: FUNNEL inport 0 enabled
> > [ 1727.854241] coresight-funnel 230c0000.funnel: FUNNEL inport 0 disabled
> > [ 1727.860709] coresight-funnel 20040000.funnel: FUNNEL inport 1 disabled
> > [ 1727.867192] coresight-tmc 20010000.etf: TMC disabled
> > [ 1727.872111] coresight-funnel 20150000.funnel: FUNNEL inport 0 disabled
> > [ 1727.878575] coresight-replicator-qcom 20120000.replicator: REPLICATOR
> > disabled
> > [ 1727.885742] coresight-tmc 20070000.etr: TMC-ETR disabled
> > [ 1727.891503] coresight-replicator-qcom 20120000.replicator: REPLICATOR
> > enabled
> > [ 1727.898577] coresight-funnel 20150000.funnel: FUNNEL inport 0 enabled
> > [ 1727.904968] coresight-tmc 20010000.etf: TMC-ETF enabled
> > [ 1727.910147] coresight-funnel 20040000.funnel: FUNNEL inport 1 enabled
> > [ 1727.916534] coresight-funnel 230c0000.funnel: FUNNEL inport 0 enabled
> > Linux
> > [ 1727.936635] coresight-funnel 230c0000.funnel: FUNNEL inport 0 disabled
> > [ 1727.943106] coresight-funnel 20040000.funnel: FUNNEL inport 1 disabled
> > [ 1727.949589] coresight-tmc 20010000.etf: TMC disabled
> > [ 1727.954507] coresight-funnel 20150000.funnel: FUNNEL inport 0 disabled
> > [ 1727.960971] coresight-replicator-qcom 20120000.replicator: REPLICATOR
> > disabled
> > [ 1727.968139] coresight-tmc 20070000.etr: TMC-ETR disabled
> > [ perf record: Woken up 2 times to write data ]
> > [ perf record: Captured and wrote
> >
> > ...and the hard lock-up.
> >
> ​So, running the stuff as usual, gcc 6.x built kernel and perf, as root and
> as my user login via sudo, various cores

gcc, kernel, and perf versions aren't shown below again.  I also don't
see sudo being used.

> ​======================================================
> root@linaro-developer:/home/mleach/perf-tools# taskset -c 2 ./perf record
> -e cs_etm/@20070000.etr/u --per-thread taskset -c 2 uname
> Linux
> [ perf record: Woken up 2 times to write data ]
> [ perf record: Captured and wrote 0.077 MB perf.data ]
> root@linaro-developer:/home/mleach/perf-tools# taskset -c 2 ./perf record
> -e cs_etm/@20070000.etr/u --per-thread taskset -c 2 uname
> Linux
> [ perf record: Woken up 2 times to write data ]
> [ perf record: Captured and wrote 0.076 MB perf.data ]
> root@linaro-developer:/home/mleach/perf-tools# taskset -c 0 ./perf record
> -e cs_etm/@20070000.etr/u --per-thread taskset -c 0 uname
> Linux
> [ perf record: Woken up 2 times to write data ]
> [ perf record: Captured and wrote 0.076 MB perf.data ]
> root@linaro-developer:/home/mleach/perf-tools#
> root@linaro-developer:/home/mleach/perf-tools#

> mleach@linaro-developer:~/perf-tools$ sudo taskset -c 0 ./perf record -e
> cs_etm/@20070000.etr/u --per-thread taskset -c 0 uname
> Linux
> [ perf record: Woken up 2 times to write data ]
> [ perf record: Captured and wrote 0.077 MB perf.data ]
> ​===========================================================
>
> ​All good - at least on this R2.

Well I _consistently_ get the hard lockup on first try.

One obvious difference is my runs get funnel messages, whereas yours
don't. 

Is that due to my building with DEBUG=5?  Can you try building
your perf like this then?:

make -C perf NO_LIBDW_DWARF_UNWIND=1 NO_LIBUNWIND=1 NO_LIBBPF=1 NO_LIBELF=1 NO_SDT=1 NO_LOCAL_LIBUNWIND=1 NO_LIBAUDIT=1 NO_LIBCRYPTO=1 NO_GTK2=1 NO_SLANG=1 NO_LIBPYTHON=1 NO_LIBPERL=1 NO_JVMTI=1 DEBUG=5

You continue to not mention trying with a time delay in between your
runs.  Can you wait several minutes between runs?

Here are the list of differences we should double-check:

- device tree - juno-r2.dtb from commit c508373874

- distro (i.e., libc):  Debian 9 stretch:

---
root@juno:~# ldd ./perf
        linux-vdso.so.1 (0x0000ffff8afe8000)
        libpthread.so.0 => /lib/aarch64-linux-gnu/libpthread.so.0 (0x0000ffff8afac000)
        librt.so.1 => /lib/aarch64-linux-gnu/librt.so.1 (0x0000ffff8af95000)
        libm.so.6 => /lib/aarch64-linux-gnu/libm.so.6 (0x0000ffff8aeea000)
        libdl.so.2 => /lib/aarch64-linux-gnu/libdl.so.2 (0x0000ffff8aed7000)
        libc.so.6 => /lib/aarch64-linux-gnu/libc.so.6 (0x0000ffff8ad8d000)
        /lib/ld-linux-aarch64.so.1 (0x0000aaaab6360000)
---

  Can you provide your details?

- firmware (see below log)

- kernel config
- gcc: I can reproduce with Linaro's 4.9.4:

---
root@juno:~# dmesg | grep gcc
[    0.000000] Linux version 4.11.0-rc1-g0d15341 (kim@dupont) (gcc version 4.9.4 20151028 (prerelease) (Linaro GCC 4.9-2016.02) ) #3 SMP PREEMPT Tue Mar 14 22:41:34 CDT 2017
root@juno:~# strings -a ./perf | grep "GCC"
GCC: (Linaro GCC 4.9-2016.02) 4.9.4 20151028 (prerelease)
---

My entire session log, from firmware start, is below.  I didn't have
any PCI badness and only use the front networking port.  IIRC, those
can be kernel config related, and since I'm using your kernel config,
and not seeing these problems, I'd have to ask to see whether your
dmesg matches?

Also, can you confirm the OOM when enabling the sinks prior to perf
invocation?  If all else fails, can we work on fixing that problem?

Thanks,

Kim

---------------
Cmd> reboot

Powering up system...

Switching on ATXPSU...
PMIC RAM configuration (pms_v105.bin)...
MBtemp   : 29 degC

Configuring motherboard (rev D, var A)...
IOFPGA image \MB\HBI0262D\io_b118.bit
IOFPGA  config: PASSED
OSC CLK config: PASSED

Configuring SCC registers...
Writing SCC 0x00000054 with 0x0007FFFE
Writing SCC 0x0000005C with 0x00FE001E
Writing SCC 0x00000100 with 0x00271000
Writing SCC 0x00000104 with 0x00013100
Writing SCC 0x00000108 with 0x003F1000
Writing SCC 0x0000010C with 0x0001F300
Writing SCC 0x00000118 with 0x003F1000
Writing SCC 0x0000011C with 0x0001F100
Writing SCC 0x000000F8 with 0x0BEC0000
Writing SCC 0x000000FC with 0xABE40000
Writing SCC 0x00000A14 with 0x00000000
Writing SCC 0x0000000C with 0x000000C2
Writing SCC 0x00000010 with 0x000000C2

Peripheral ID0:0x000000AD
Peripheral ID1:0x000000B0
Peripheral ID2:0x0000001B
Peripheral ID3:0x00000000
Peripheral ID4:0x0000000D
Peripheral ID5:0x000000F0
Peripheral ID6:0x00000005
Peripheral ID7:0x000000B1

Programming NOR Flash
PCIE clock configured...

Testing motherboard interfaces (FPGA build 118)...
SRAM 32MB test: PASSED
LAN9118   test: PASSED
KMI1/2    test: PASSED
MMC       test: PASSED
PB/LEDs   test: PASSED
FPGA UART test: PASSED
PCIe init test: PASSED
PCIe MAC addresss 0002-F700-6BC7
MAC addrs test: PASSED

SMC MAC address 0002-F700-6BC5
Setting HDMI0 mode for SVGA.
Setting HDMI1 mode for SVGA.

SoC SMB clock enabled.

Testing SMB clock...
SMB clock running
Releasing system resets...

UART0 set to SoC UART0
UART1 set to SoC UART1

NOTICE:  Booting Trusted Firmware
NOTICE:  BL1: v1.1(debug):4a1dcde
NOTICE:  BL1: Built : 11:03:08, Nov 25 2015
NOTICE:  BL1: Booting BL2
NOTICE:  BL2: v1.1(debug):4a1dcde
NOTICE:  BL2: Built : 11:03:13, Nov 25 2015
WARNING: Failed to obtain reference to image id=10 (-2)
WARNING: Failed to load BL3-2 (-2)
NOTICE:  BL1: Booting BL3-1
NOTICE:  BL3-1: v1.1(debug):4a1dcde
NOTICE:  BL3-1: Built : 11:03:16, Nov 25 2015
UEFI firmware (version ea31f8e built at 14:16:35 on Oct 15 2015)
add-symbol-file /linaro/platforms/uefi/edk2/Build/ArmJuno/DEBUG_GCC49/AARCH64/ArmPlatformPkg/PrePi/PeiMPCore/DEBUG/ArmPlatformPrePiMPCore.dll 0xE0001800
add-symbol-file /linaro/platforms/uefi/edk2/Build/ArmJuno/DEBUG_GCC49/AARCH64/MdeModulePkg/Core/Dxe/DxeMain/DEBUG/DxeCore.dll 0xFE760260
Loading DxeCore at 0x00FE760000 EntryPoint=0x00FE760260
add-symbol-file /linaro/platforms/uefi/edk2/Build/ArmJuno/DEBUG_GCC49/AARCH64/MdeModulePkg/Core/Dxe/DxeMain/DEBUG/DxeCore.dll 0xFE760000
HOBLIST address in DXE = 0x9FFDAA018
Memory Allocation 0x00000004 0xFEFEA000 - 0xFEFEAFFF
Memory Allocation 0x00000004 0xFEFE8000 - 0xFEFE9FFF
Memory Allocation 0x00000004 0xFEFE6000 - 0xFEFE7FFF
Memory Allocation 0x00000004 0xFEFE4000 - 0xFEFE5FFF
Memory Allocation 0x00000004 0xFEFE2000 - 0xFEFE3FFF
Memory Allocation 0x00000004 0xFEFE0000 - 0xFEFE1FFF
Memory Allocation 0x00000004 0xFEFDE000 - 0xFEFDFFFF
Memory Allocation 0x00000004 0xFEFEB000 - 0xFEFFFFFF
Memory Allocation 0x00000004 0xFEFCE000 - 0xFEFDDFFF
Memory Allocation 0x00000004 0xFEBB3000 - 0xFEFCDFFF
Memory Allocation 0x00000004 0xFE798000 - 0xFEBB2FFF
Memory Allocation 0x00000004 0xFE760000 - 0xFE797FFF
Memory Allocation 0x00000003 0xFE760000 - 0xFE797FFF
FV Hob            0xE0000000 - 0xE00EFFFF
FV Hob            0xFE798000 - 0xFEBB1A7F
FV2 Hob           0xFE798000 - 0xFEBB1A7F
add-symbol-file /linaro/platforms/uefi/edk2/Build/ArmJuno/DEBUG_GCC49/AARCH64/MdeModulePkg/Universal/PCD/Dxe/Pcd/DEBUG/PcdDxe.dll 0x9FFF43260
Loading driver at 0x009FFF43000 EntryPoint=0x009FFF432A8 PcdDxe.efi
add-symbol-file /linaro/platforms/uefi/edk2/Build/ArmJuno/DEBUG_GCC49/AARCH64/ArmPkg/Drivers/CpuDxe/CpuDxe/DEBUG/ArmCpuDxe.dll 0x9FFF34800
Loading driver at 0x009FFF34000 EntryPoint=0x009FFF34848 ArmCpuDxe.efi
add-symbol-file /linaro/platforms/uefi/edk2/Build/ArmJuno/DEBUG_GCC49/AARCH64/MdeModulePkg/Core/RuntimeDxe/RuntimeDxe/DEBUG/RuntimeDxe.dll 0x9FFF80260
!!!!!!!!  InsertImageRecord - Section Alignment(0x20) is not 4K  !!!!!!!!
!!!!!!!!  Image - /linaro/platforms/uefi/edk2/Build/ArmJuno/DEBUG_GCC49/AARCH64/MdeModulePkg/Core/RuntimeDxe/RuntimeDxe/DEBUG/RuntimeDxe.dll  !!!!!!!!
Loading driver at 0x009FFF80000 EntryPoint=0x009FFF802A8 RuntimeDxe.efi
add-symbol-file /linaro/platforms/uefi/edk2/Build/ArmJuno/DEBUG_GCC49/AARCH64/MdeModulePkg/Universal/SecurityStubDxe/SecurityStubDxe/DEBUG/SecurityStubDxe.dll 0x9FFF2D260
Loading driver at 0x009FFF2D000 EntryPoint=0x009FFF2D2A8 SecurityStubDxe.efi
add-symbol-file /linaro/platforms/uefi/edk2/Build/ArmJuno/DEBUG_GCC49/AARCH64/EmbeddedPkg/ResetRuntimeDxe/ResetRuntimeDxe/DEBUG/Reset.dll 0x9FFF70260
!!!!!!!!  InsertImageRecord - Section Alignment(0x20) is not 4K  !!!!!!!!
!!!!!!!!  Image - /linaro/platforms/uefi/edk2/Build/ArmJuno/DEBUG_GCC49/AARCH64/EmbeddedPkg/ResetRuntimeDxe/ResetRuntimeDxe/DEBUG/Reset.dll  !!!!!!!!
Loading driver at 0x009FFF70000 EntryPoint=0x009FFF702A8 Reset.efi
add-symbol-file /linaro/platforms/uefi/edk2/Build/ArmJuno/DEBUG_GCC49/AARCH64/EmbeddedPkg/RealTimeClockRuntimeDxe/RealTimeClockRuntimeDxe/DEBUG/RealTimeClock.dll 0x9FFF60260
!!!!!!!!  InsertImageRecord - Section Alignment(0x20) is not 4K  !!!!!!!!
!!!!!!!!  Image - /linaro/platforms/uefi/edk2/Build/ArmJuno/DEBUG_GCC49/AARCH64/EmbeddedPkg/RealTimeClockRuntimeDxe/RealTimeClockRuntimeDxe/DEBUG/RealTimeClock.dll  !!!!!!!!
Loading driver at 0x009FFF60000 EntryPoint=0x009FFF602A8 RealTimeClock.efi
add-symbol-file /linaro/platforms/uefi/edk2/Build/ArmJuno/DEBUG_GCC49/AARCH64/MdeModulePkg/Universal/Acpi/AcpiTableDxe/AcpiTableDxe/DEBUG/AcpiTableDxe.dll 0x9FFF1E260
Loading driver at 0x009FFF1E000 EntryPoint=0x009FFF1E2A8 AcpiTableDxe.efi
add-symbol-file /linaro/platforms/uefi/edk2/Build/ArmJuno/DEBUG_GCC49/AARCH64/MdeModulePkg/Universal/HiiDatabaseDxe/HiiDatabaseDxe/DEBUG/HiiDatabase.dll 0x9FFEF2260
Loading driver at 0x009FFEF2000 EntryPoint=0x009FFEF22A8 HiiDatabase.efi
add-symbol-file /linaro/platforms/uefi/edk2/Build/ArmJuno/DEBUG_GCC49/AARCH64/EmbeddedPkg/SimpleTextInOutSerial/SimpleTextInOutSerial/DEBUG/SimpleTextInOutSerial.dll 0x9FFEEC260
Loading driver at 0x009FFEEC000 EntryPoint=0x009FFEEC2A8 SimpleTextInOutSerial.efi
add-symbol-file /linaro/platforms/uefi/edk2/Build/ArmJuno/DEBUG_GCC49/AARCH64/UefiCpuPkg/CpuIo2Dxe/CpuIo2Dxe/DEBUG/CpuIo2Dxe.dll 0x9FFEE6260
Loading driver at 0x009FFEE6000 EntryPoint=0x009FFEE62A8 CpuIo2Dxe.efi
add-symbol-file /linaro/platforms/uefi/edk2/Build/ArmJuno/DEBUG_GCC49/AARCH64/EmbeddedPkg/Drivers/SataSiI3132Dxe/SataSiI3132Dxe/DEBUG/SataSiI3132.dll 0x9FFEDC260
Loading driver at 0x009FFEDC000 EntryPoint=0x009FFEDC2A8 SataSiI3132.efi
add-symbol-file /linaro/platforms/uefi/edk2/Build/ArmJuno/DEBUG_GCC49/AARCH64/MdeModulePkg/Universal/Network/DpcDxe/DpcDxe/DEBUG/DpcDxe.dll 0x9FFED6260
Loading driver at 0x009FFED6000 EntryPoint=0x009FFED62A8 DpcDxe.efi
add-symbol-file /linaro/platforms/uefi/edk2/Build/ArmJuno/DEBUG_GCC49/AARCH64/MdeModulePkg/Universal/DevicePathDxe/DevicePathDxe/DEBUG/DevicePathDxe.dll 0x9FFEC4260
Loading driver at 0x009FFEC4000 EntryPoint=0x009FFEC42A8 DevicePathDxe.efi
add-symbol-file /linaro/platforms/uefi/edk2/Build/ArmJuno/DEBUG_GCC49/AARCH64/EmbeddedPkg/MetronomeDxe/MetronomeDxe/DEBUG/MetronomeDxe.dll 0x9FFEBE260
Loading driver at 0x009FFEBE000 EntryPoint=0x009FFEBE2A8 MetronomeDxe.efi
add-symbol-file /linaro/platforms/uefi/edk2/Build/ArmJuno/DEBUG_GCC49/AARCH64/ArmPlatformPkg/Drivers/NorFlashDxe/NorFlashDxe/DEBUG/ArmVeNorFlashDxe.dll 0x9FFF50260
!!!!!!!!  InsertImageRecord - Section Alignment(0x20) is not 4K  !!!!!!!!
!!!!!!!!  Image - /linaro/platforms/uefi/edk2/Build/ArmJuno/DEBUG_GCC49/AARCH64/ArmPlatformPkg/Drivers/NorFlashDxe/NorFlashDxe/DEBUG/ArmVeNorFlashDxe.dll  !!!!!!!!
Loading driver at 0x009FFF50000 EntryPoint=0x009FFF502A8 ArmVeNorFlashDxe.efi
add-symbol-file /linaro/platforms/uefi/edk2/Build/ArmJuno/DEBUG_GCC49/AARCH64/MdeModulePkg/Universal/Variable/RuntimeDxe/VariableRuntimeDxe/DEBUG/VariableRuntimeDxe.dll 0x9FAF10260
!!!!!!!!  InsertImageRecord - Section Alignment(0x20) is not 4K  !!!!!!!!
!!!!!!!!  Image - /linaro/platforms/uefi/edk2/Build/ArmJuno/DEBUG_GCC49/AARCH64/MdeModulePkg/Universal/Variable/RuntimeDxe/VariableRuntimeDxe/DEBUG/VariableRuntimeDxe.dll  !!!!!!!!
Loading driver at 0x009FAF10000 EntryPoint=0x009FAF102A8 VariableRuntimeDxe.efi
add-symbol-file /linaro/platforms/uefi/edk2/Build/ArmJuno/DEBUG_GCC49/AARCH64/MdeModulePkg/Universal/FaultTolerantWriteDxe/FaultTolerantWriteDxe/DEBUG/FaultTolerantWriteDxe.dll 0x9FFEB2260
Loading driver at 0x009FFEB2000 EntryPoint=0x009FFEB22A8 FaultTolerantWriteDxe.efi
add-symbol-file /linaro/platforms/uefi/edk2/Build/ArmJuno/DEBUG_GCC49/AARCH64/ArmPkg/Drivers/ArmGic/ArmGicDxe/DEBUG/ArmGicDxe.dll 0x9FFEAA260
Loading driver at 0x009FFEAA000 EntryPoint=0x009FFEAA2A8 ArmGicDxe.efi
add-symbol-file /linaro/platforms/uefi/edk2/Build/ArmJuno/DEBUG_GCC49/AARCH64/EmbeddedPkg/Drivers/Lan9118Dxe/Lan9118Dxe/DEBUG/Lan9118Dxe.dll 0x9FFE9E260
Loading driver at 0x009FFE9E000 EntryPoint=0x009FFE9E2A8 Lan9118Dxe.efi
add-symbol-file /linaro/platforms/uefi/edk2/Build/ArmJuno/DEBUG_GCC49/AARCH64/ArmPlatformPkg/Bds/Bds/DEBUG/ArmPlatformBds.dll 0x9FFE7A260
Loading driver at 0x009FFE7A000 EntryPoint=0x009FFE7A2A8 ArmPlatformBds.efi
add-symbol-file /linaro/platforms/uefi/edk2/Build/ArmJuno/DEBUG_GCC49/AARCH64/MdeModulePkg/Universal/CapsuleRuntimeDxe/CapsuleRuntimeDxe/DEBUG/CapsuleRuntimeDxe.dll 0x9FAEE0260
!!!!!!!!  InsertImageRecord - Section Alignment(0x20) is not 4K  !!!!!!!!
!!!!!!!!  Image - /linaro/platforms/uefi/edk2/Build/ArmJuno/DEBUG_GCC49/AARCH64/MdeModulePkg/Universal/CapsuleRuntimeDxe/CapsuleRuntimeDxe/DEBUG/CapsuleRuntimeDxe.dll  !!!!!!!!
Loading driver at 0x009FAEE0000 EntryPoint=0x009FAEE02A8 CapsuleRuntimeDxe.efi
add-symbol-file /linaro/platforms/uefi/edk2/Build/ArmJuno/DEBUG_GCC49/AARCH64/MdeModulePkg/Universal/MonotonicCounterRuntimeDxe/MonotonicCounterRuntimeDxe/DEBUG/MonotonicCounterRuntimeDxe.dll 0x9FAED0260
!!!!!!!!  InsertImageRecord - Section Alignment(0x20) is not 4K  !!!!!!!!
!!!!!!!!  Image - /linaro/platforms/uefi/edk2/Build/ArmJuno/DEBUG_GCC49/AARCH64/MdeModulePkg/Universal/MonotonicCounterRuntimeDxe/MonotonicCounterRuntimeDxe/DEBUG/MonotonicCounterRuntimeDxe.dll  !!!!!!!!
Loading driver at 0x009FAED0000 EntryPoint=0x009FAED02A8 MonotonicCounterRuntimeDxe.efi
add-symbol-file /linaro/platforms/uefi/edk2/Build/ArmJuno/DEBUG_GCC49/AARCH64/ArmPkg/Drivers/TimerDxe/TimerDxe/DEBUG/ArmTimerDxe.dll 0x9FFE73260
Loading driver at 0x009FFE73000 EntryPoint=0x009FFE732A8 ArmTimerDxe.efi
add-symbol-file /linaro/platforms/uefi/edk2/Build/ArmJuno/DEBUG_GCC49/AARCH64/ArmPkg/Drivers/GenericWatchdogDxe/GenericWatchdogDxe/DEBUG/GenericWatchdogDxe.dll 0x9FFE6D260
Loading driver at 0x009FFE6D000 EntryPoint=0x009FFE6D2A8 GenericWatchdogDxe.efi
add-symbol-file /linaro/platforms/uefi/edk2/Build/ArmJuno/DEBUG_GCC49/AARCH64/ArmPlatformPkg/ArmJunoPkg/Drivers/PciHostBridgeDxe/PciHostBridgeDxe/DEBUG/PciHostBridge.dll 0x9FFE60260
Loading driver at 0x009FFE60000 EntryPoint=0x009FFE602A8 PciHostBridge.efi
add-symbol-file /linaro/platforms/uefi/edk2/Build/ArmJuno/DEBUG_GCC49/AARCH64/ArmPlatformPkg/ArmJunoPkg/Drivers/ArmJunoDxe/ArmJunoDxe/DEBUG/ArmJunoDxe.dll 0x9FFE49260
Loading driver at 0x009FFE49000 EntryPoint=0x009FFE492A8 ArmJunoDxe.efi
- Found 'FACS' ACPI Table
- Found 'FACP' ACPI Table
- Found 'GTDT' ACPI Table
- Found 'APIC' ACPI Table
- Found 'DSDT' ACPI Table
add-symbol-file /linaro/platforms/uefi/edk2/Build/ArmJuno/DEBUG_GCC49/AARCH64/MdeModulePkg/Universal/Console/ConPlatformDxe/ConPlatformDxe/DEBUG/ConPlatformDxe.dll 0x9FFE41260
Loading driver at 0x009FFE41000 EntryPoint=0x009FFE412A8 ConPlatformDxe.efi
add-symbol-file /linaro/platforms/uefi/edk2/Build/ArmJuno/DEBUG_GCC49/AARCH64/MdeModulePkg/Universal/Console/GraphicsConsoleDxe/GraphicsConsoleDxe/DEBUG/GraphicsConsoleDxe.dll 0x9FFE34260
Loading driver at 0x009FFE34000 EntryPoint=0x009FFE342A8 GraphicsConsoleDxe.efi
add-symbol-file /linaro/platforms/uefi/edk2/Build/ArmJuno/DEBUG_GCC49/AARCH64/MdeModulePkg/Universal/Console/TerminalDxe/TerminalDxe/DEBUG/TerminalDxe.dll 0x9FFE24260
Loading driver at 0x009FFE24000 EntryPoint=0x009FFE242A8 TerminalDxe.efi
add-symbol-file /linaro/platforms/uefi/edk2/Build/ArmJuno/DEBUG_GCC49/AARCH64/ArmPlatformPkg/FileSystem/BootMonFs/BootMonFs/DEBUG/BootMonFs.dll 0x9FFE17260
Loading driver at 0x009FFE17000 EntryPoint=0x009FFE172A8 BootMonFs.efi
add-symbol-file /linaro/platforms/uefi/edk2/Build/ArmJuno/DEBUG_GCC49/AARCH64/MdeModulePkg/Universal/Disk/DiskIoDxe/DiskIoDxe/DEBUG/DiskIoDxe.dll 0x9FFE0D260
Loading driver at 0x009FFE0D000 EntryPoint=0x009FFE0D2A8 DiskIoDxe.efi
add-symbol-file /linaro/platforms/uefi/edk2/Build/ArmJuno/DEBUG_GCC49/AARCH64/MdeModulePkg/Universal/Disk/PartitionDxe/PartitionDxe/DEBUG/PartitionDxe.dll 0x9FFE01260
Loading driver at 0x009FFE01000 EntryPoint=0x009FFE012A8 PartitionDxe.efi
add-symbol-file /work/jenkins/workspace/ap-uefi-bin/EDK2_ARCH/ARM/EDK2_BINARY/FatPkg/label/sas-sw/Build/Fat/RELEASE_GCC49/AARCH64/FatPkg/EnhancedFatDxe/Fat/DEBUG/Fat.dll 0x9FFDFA260
Loading driver at 0x009FFDFA000 EntryPoint=0x009FFDFA2A8 Fat.efi
add-symbol-file /linaro/platforms/uefi/edk2/Build/ArmJuno/DEBUG_GCC49/AARCH64/MdeModulePkg/Universal/Disk/UnicodeCollation/EnglishDxe/EnglishDxe/DEBUG/EnglishDxe.dll 0x9FFDF4260
Loading driver at 0x009FFDF4000 EntryPoint=0x009FFDF42A8 EnglishDxe.efi
add-symbol-file /linaro/platforms/uefi/edk2/Build/ArmJuno/DEBUG_GCC49/AARCH64/MdeModulePkg/Universal/FvSimpleFileSystemDxe/FvSimpleFileSystemDxe/DEBUG/FvSimpleFileSystem.dll 0x9FFDE8260
Loading driver at 0x009FFDE8000 EntryPoint=0x009FFDE82A8 FvSimpleFileSystem.efi
add-symbol-file /linaro/platforms/uefi/edk2/Build/ArmJuno/DEBUG_GCC49/AARCH64/MdeModulePkg/Bus/Pci/EhciDxe/EhciDxe/DEBUG/EhciDxe.dll 0x9FFDD5260
Loading driver at 0x009FFDD5000 EntryPoint=0x009FFDD52A8 EhciDxe.efi
add-symbol-file /linaro/platforms/uefi/edk2/Build/ArmJuno/DEBUG_GCC49/AARCH64/MdeModulePkg/Bus/Usb/UsbBusDxe/UsbBusDxe/DEBUG/UsbBusDxe.dll 0x9FFDC2260
Loading driver at 0x009FFDC2000 EntryPoint=0x009FFDC22A8 UsbBusDxe.efi
add-symbol-file /linaro/platforms/uefi/edk2/Build/ArmJuno/DEBUG_GCC49/AARCH64/MdeModulePkg/Bus/Usb/UsbKbDxe/UsbKbDxe/DEBUG/UsbKbDxe.dll 0x9FAEC1260
Loading driver at 0x009FAEC1000 EntryPoint=0x009FAEC12A8 UsbKbDxe.efi
add-symbol-file /linaro/platforms/uefi/edk2/Build/ArmJuno/DEBUG_GCC49/AARCH64/MdeModulePkg/Bus/Usb/UsbMassStorageDxe/UsbMassStorageDxe/DEBUG/UsbMassStorageDxe.dll 0x9FAEB4260
Loading driver at 0x009FAEB4000 EntryPoint=0x009FAEB42A8 UsbMassStorageDxe.efi
add-symbol-file /linaro/platforms/uefi/edk2/Build/ArmJuno/DEBUG_GCC49/AARCH64/MdeModulePkg/Bus/Usb/UsbMouseDxe/UsbMouseDxe/DEBUG/UsbMouseDxe.dll 0x9FAF82260
Loading driver at 0x009FAF82000 EntryPoint=0x009FAF822A8 UsbMouseDxe.efi
add-symbol-file /linaro/platforms/uefi/edk2/Build/ArmJuno/DEBUG_GCC49/AARCH64/MdeModulePkg/Bus/Pci/PciBusDxe/PciBusDxe/DEBUG/PciBusDxe.dll 0x9FAE91260
Loading driver at 0x009FAE91000 EntryPoint=0x009FAE912A8 PciBusDxe.efi
add-symbol-file /linaro/platforms/uefi/edk2/Build/ArmJuno/DEBUG_GCC49/AARCH64/MdeModulePkg/Bus/Ata/AtaBusDxe/AtaBusDxe/DEBUG/AtaBusDxe.dll 0x9FAE82260
Loading driver at 0x009FAE82000 EntryPoint=0x009FAE822A8 AtaBusDxe.efi
add-symbol-file /linaro/platforms/uefi/edk2/Build/ArmJuno/DEBUG_GCC49/AARCH64/MdeModulePkg/Universal/Network/ArpDxe/ArpDxe/DEBUG/ArpDxe.dll 0x9FAE74260
Loading driver at 0x009FAE74000 EntryPoint=0x009FAE742A8 ArpDxe.efi
add-symbol-file /linaro/platforms/uefi/edk2/Build/ArmJuno/DEBUG_GCC49/AARCH64/MdeModulePkg/Universal/Network/Dhcp4Dxe/Dhcp4Dxe/DEBUG/Dhcp4Dxe.dll 0x9FAE5F260
Loading driver at 0x009FAE5F000 EntryPoint=0x009FAE5F2A8 Dhcp4Dxe.efi
add-symbol-file /linaro/platforms/uefi/edk2/Build/ArmJuno/DEBUG_GCC49/AARCH64/MdeModulePkg/Universal/Network/Ip4ConfigDxe/Ip4ConfigDxe/DEBUG/Ip4ConfigDxe.dll 0x9FAE4D260
Loading driver at 0x009FAE4D000 EntryPoint=0x009FAE4D2A8 Ip4ConfigDxe.efi
add-symbol-file /linaro/platforms/uefi/edk2/Build/ArmJuno/DEBUG_GCC49/AARCH64/MdeModulePkg/Universal/Network/Ip4Dxe/Ip4Dxe/DEBUG/Ip4Dxe.dll 0x9FAE34260
Loading driver at 0x009FAE34000 EntryPoint=0x009FAE342A8 Ip4Dxe.efi
add-symbol-file /linaro/platforms/uefi/edk2/Build/ArmJuno/DEBUG_GCC49/AARCH64/MdeModulePkg/Universal/Network/MnpDxe/MnpDxe/DEBUG/MnpDxe.dll 0x9FAE1F260
Loading driver at 0x009FAE1F000 EntryPoint=0x009FAE1F2A8 MnpDxe.efi
add-symbol-file /linaro/platforms/uefi/edk2/Build/ArmJuno/DEBUG_GCC49/AARCH64/MdeModulePkg/Universal/Network/VlanConfigDxe/VlanConfigDxe/DEBUG/VlanConfigDxe.dll 0x9FAE10260
Loading driver at 0x009FAE10000 EntryPoint=0x009FAE102A8 VlanConfigDxe.efi
add-symbol-file /linaro/platforms/uefi/edk2/Build/ArmJuno/DEBUG_GCC49/AARCH64/MdeModulePkg/Universal/Network/Mtftp4Dxe/Mtftp4Dxe/DEBUG/Mtftp4Dxe.dll 0x9FADFD260
Loading driver at 0x009FADFD000 EntryPoint=0x009FADFD2A8 Mtftp4Dxe.efi
add-symbol-file /linaro/platforms/uefi/edk2/Build/ArmJuno/DEBUG_GCC49/AARCH64/MdeModulePkg/Universal/Network/Tcp4Dxe/Tcp4Dxe/DEBUG/Tcp4Dxe.dll 0x9FADDB260
Loading driver at 0x009FADDB000 EntryPoint=0x009FADDB2A8 Tcp4Dxe.efi
add-symbol-file /linaro/platforms/uefi/edk2/Build/ArmJuno/DEBUG_GCC49/AARCH64/MdeModulePkg/Universal/Network/Udp4Dxe/Udp4Dxe/DEBUG/Udp4Dxe.dll 0x9FADC8260
Loading driver at 0x009FADC8000 EntryPoint=0x009FADC82A8 Udp4Dxe.efi
add-symbol-file /linaro/platforms/uefi/edk2/Build/ArmJuno/DEBUG_GCC49/AARCH64/MdeModulePkg/Universal/Network/UefiPxeBcDxe/UefiPxeBcDxe/DEBUG/UefiPxe4BcDxe.dll 0x9FADB5260
Loading driver at 0x009FADB5000 EntryPoint=0x009FADB52A8 UefiPxe4BcDxe.efi
add-symbol-file /linaro/platforms/uefi/edk2/Build/ArmJuno/DEBUG_GCC49/AARCH64/MdeModulePkg/Universal/Network/IScsiDxe/IScsiDxe/DEBUG/IScsi4Dxe.dll 0x9FAD94260
Loading driver at 0x009FAD94000 EntryPoint=0x009FAD942A8 IScsi4Dxe.efi
PCI: The size 0x7F000000 of the region 0x80000000 has been increased to be a power of two for the AXI translation table.
PCI: The size 0x180000000 of the region 0x880000000 has been increased to be a power of two for the AXI translation table.
The default boot selection will start in   1 seconds
Found image: fip in block 4.
Found image: norkern in block 87.
Found image: ramdisk.img in block 124.
Found image: board.dtb in block 128.
Found image: hdlcdclk in block 151.
Found image: bl0 in block 249.
Found image: bl1 in block 251.
initrd: address 0x0
initrd: length  0x0
   PEI    986 ms
   DXE   1478 ms
   BDS   1643 ms
Total Time = 4108 ms

linux:  address 0x80080000
linux:  length  0x10CE200
fdt:    address 0x9FE00000
fdt:    length  0x5D40
[    0.000000] Booting Linux on physical CPU 0x100
[    0.000000] Linux version 4.11.0-rc1-g0d15341 (kim@dupont) (gcc version 4.9.4 20151028 (prerelease) (Linaro GCC 4.9-2016.02) ) #3 SMP PREEMPT Tue Mar 14 22:41:34 CDT 2017
[    0.000000] Boot CPU: AArch64 Processor [410fd033]
[    0.000000] efi: Getting EFI parameters from FDT:
[    0.000000] efi: UEFI not found.
[    0.000000] cma: Reserved 16 MiB at 0x00000000fd400000
[    0.000000] psci: probing for conduit method from DT.
[    0.000000] psci: PSCIv1.0 detected in firmware.
[    0.000000] psci: Using standard PSCI v0.2 function IDs
[    0.000000] psci: MIGRATE_INFO_TYPE not supported.
[    0.000000] percpu: Embedded 24 pages/cpu @ffff80097fe9b000 s60928 r8192 d29184 u98304
[    0.000000] Detected VIPT I-cache on CPU0
[    0.000000] CPU features: enabling workaround for ARM erratum 845719
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 2060288
[    0.000000] Kernel command line: console=ttyAMA0,115200  rootwait root=PARTUUID=99389c0e-3d5a-4d98-b970-c0deb747
[    0.000000] log_buf_len individual max cpu contribution: 4096 bytes
[    0.000000] log_buf_len total cpu_extra contributions: 20480 bytes
[    0.000000] log_buf_len min size: 16384 bytes
[    0.000000] log_buf_len: 65536 bytes
[    0.000000] early log buf free: 14648(89%)
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[    0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.000000] software IO TLB [mem 0xf9400000-0xfd400000] (64MB) mapped at [ffff800079400000-ffff80007d3fffff]
[    0.000000] Memory: 8126368K/8372224K available (9980K kernel code, 1400K rwdata, 4296K rodata, 1472K init, 299K bss, 229472K reserved, 16384K cma-reserved)
[    0.000000] Virtual kernel memory layout:
[    0.000000]     modules : 0xffff000000000000 - 0xffff000008000000   (   128 MB)
[    0.000000]     vmalloc : 0xffff000008000000 - 0xffff7dffbfff0000   (129022 GB)
[    0.000000]       .text : 0xffff000008080000 - 0xffff000008a40000   (  9984 KB)
[    0.000000]     .rodata : 0xffff000008a40000 - 0xffff000008e80000   (  4352 KB)
[    0.000000]       .init : 0xffff000008e80000 - 0xffff000008ff0000   (  1472 KB)
[    0.000000]       .data : 0xffff000008ff0000 - 0xffff00000914e200   (  1401 KB)
[    0.000000]        .bss : 0xffff00000914e200 - 0xffff000009198f50   (   300 KB)
[    0.000000]     fixed   : 0xffff7dfffe7fd000 - 0xffff7dfffec00000   (  4108 KB)
[    0.000000]     PCI I/O : 0xffff7dfffee00000 - 0xffff7dffffe00000   (    16 MB)
[    0.000000]     vmemmap : 0xffff7e0000000000 - 0xffff800000000000   (  2048 GB maximum)
[    0.000000]               0xffff7e0000000000 - 0xffff7e0026000000   (   608 MB actual)
[    0.000000]     memory  : 0xffff800000000000 - 0xffff800980000000   ( 38912 MB)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1
[    0.000000] Preemptible hierarchical RCU implementation.
[    0.000000]  Build-time adjustment of leaf fanout to 64.
[    0.000000]  RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=6.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=6
[    0.000000] NR_IRQS:64 nr_irqs:64 0
[    0.000000] GIC: Using split EOI/Deactivate mode
[    0.000000] GICv2m: range[mem 0x2c1c0000-0x2c1c0fff], SPI[224:255]
[    0.000000] arm_arch_timer: Architected cp15 and mmio timer(s) running at 50.00MHz (phys/phys).
[    0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xb8812736b, max_idle_ns: 440795202655 ns
[    0.000004] sched_clock: 56 bits at 50MHz, resolution 20ns, wraps every 4398046511100ns
[    0.000571] clocksource: arm,sp804: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275 ns
[    0.000606] Failed to initialize '/smb@08000000/motherboard/iofpga@3,00000000/timer@120000': -22
[    0.000856] Console: colour dummy device 80x25
[    0.000885] Calibrating delay loop (skipped), value calculated using timer frequency.. 100.00 BogoMIPS (lpj=200000)
[    0.000898] pid_max: default: 32768 minimum: 301
[    0.001003] Security Framework initialized
[    0.001042] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
[    0.001052] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
[    0.001827] ftrace: allocating 37034 entries in 145 pages
[    0.092059] ASID allocator initialised with 65536 entries
[    0.113104] EFI services will not be available.
[    0.128141] smp: Bringing up secondary CPUs ...
[    0.160439] Detected PIPT I-cache on CPU1
[    0.160478] CPU1: Booted secondary processor [410fd080]
[    0.192470] Detected PIPT I-cache on CPU2
[    0.192492] CPU2: Booted secondary processor [410fd080]
[    0.224556] Detected VIPT I-cache on CPU3
[    0.224600] CPU3: Booted secondary processor [410fd033]
[    0.256636] Detected VIPT I-cache on CPU4
[    0.256668] CPU4: Booted secondary processor [410fd033]
[    0.288719] Detected VIPT I-cache on CPU5
[    0.288749] CPU5: Booted secondary processor [410fd033]
[    0.288808] smp: Brought up 1 node, 6 CPUs
[    0.288841] SMP: Total of 6 processors activated.
[    0.288850] CPU features: detected feature: 32-bit EL0 Support
[    0.288907] CPU: All CPU(s) started at EL2
[    0.288935] alternatives: patching kernel code
[    0.290045] devtmpfs: initialized
[    0.294851] DMI not present or invalid.
[    0.295043] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.295060] futex hash table entries: 2048 (order: 6, 262144 bytes)
[    0.295804] pinctrl core: initialized pinctrl subsystem
[    0.296996] NET: Registered protocol family 16
[    0.298536] cpuidle: using governor menu
[    0.298678] Failed to initialise IOMMU /iommu@2b500000
[    0.298690] Failed to initialise IOMMU /iommu@2b600000
[    0.298855] Failed to initialise IOMMU /iommu@7fb00000
[    0.298866] Failed to initialise IOMMU /iommu@7fb10000
[    0.298877] Failed to initialise IOMMU /iommu@7fb20000
[    0.298888] Failed to initialise IOMMU /iommu@7fb30000
[    0.299165] vdso: 2 pages (1 code @ ffff000008a47000, 1 data @ ffff000008ff4000)
[    0.299180] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
[    0.299972] DMA: preallocated 256 KiB pool for atomic allocations
[    0.300259] Serial: AMBA PL011 UART driver
[    0.303151] 7ff80000.uart: ttyAMA0 at MMIO 0x7ff80000 (irq = 21, base_baud = 0) is a PL011 rev3
[    0.870944] console [ttyAMA0] enabled
[    0.889070] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    0.895983] ACPI: Interpreter disabled.
[    0.900511] vgaarb: loaded
[    0.903329] SCSI subsystem initialized
[    0.907302] usbcore: registered new interface driver usbfs
[    0.912764] usbcore: registered new interface driver hub
[    0.918079] usbcore: registered new device driver usb
[    0.923558] pps_core: LinuxPPS API ver. 1 registered
[    0.928503] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.937574] PTP clock support registered
[    0.941569] dmi: Firmware registration failed.
[    0.946060] Advanced Linux Sound Architecture Driver Initialized.
[    0.952471] clocksource: Switched to clocksource arch_sys_counter
[    0.987170] VFS: Disk quotas dquot_6.6.0
[    0.991096] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.998041] pnp: PnP ACPI: disabled
[    1.008946] NET: Registered protocol family 2
[    1.013754] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
[    1.021683] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    1.029767] TCP: Hash tables configured (established 65536 bind 65536)
[    1.036339] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[    1.042601] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[    1.049402] NET: Registered protocol family 1
[    1.054034] RPC: Registered named UNIX socket transport module.
[    1.059908] RPC: Registered udp transport module.
[    1.064580] RPC: Registered tcp transport module.
[    1.069245] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    1.076529] hw perfevents: enabled with armv8_cortex_a72 PMU driver, 7 counters available
[    1.084858] hw perfevents: enabled with armv8_cortex_a53 PMU driver, 7 counters available
[    1.093023] kvm [1]: 8-bit VMID
[    1.096129] kvm [1]: IDMAP page: 80a37000
[    1.100112] kvm [1]: HYP VA range: 800000000000:ffffffffffff
[    1.106598] kvm [1]: Hyp mode initialized successfully
[    1.111728] kvm [1]: vgic-v2@2c04f000
[    1.115490] kvm [1]: vgic interrupt IRQ1
[    1.119393] kvm [1]: virtual timer IRQ5
[    1.125591] audit: initializing netlink subsys (disabled)
[    1.131031] audit: type=2000 audit(0.840:1): state=initialized audit_enabled=0 res=1
[    1.131812] workingset: timestamp_bits=46 max_order=21 bucket_order=0
[    1.142730] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    1.143588] NFS: Registering the id_resolver key type
[    1.143608] Key type id_resolver registered
[    1.143611] Key type id_legacy registered
[    1.143620] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[    1.143799] 9p: Installing v9fs 9p2000 file system support
[    1.146600] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
[    1.146606] io scheduler noop registered
[    1.146911] io scheduler cfq registered (default)
[    1.146915] io scheduler mq-deadline registered
[    1.153510] pl061_gpio 1c1d0000.gpio: PL061 GPIO chip @0x000000001c1d0000 registered
[    1.154186] OF: PCI: host bridge /pcie-controller@40000000 ranges:
[    1.154201] OF: PCI:    IO 0x5f800000..0x5fffffff -> 0x00000000
[    1.154212] OF: PCI:   MEM 0x50000000..0x57ffffff -> 0x50000000
[    1.154218] OF: PCI:   MEM 0x4000000000..0x40ffffffff -> 0x4000000000
[    1.154261] pci-host-generic 40000000.pcie-controller: ECAM at [mem 0x40000000-0x4fffffff] for [bus 00-ff]
[    1.154388] pci-host-generic 40000000.pcie-controller: PCI host bridge to bus 0000:00
[    1.154397] pci_bus 0000:00: root bus resource [bus 00-ff]
[    1.154403] pci_bus 0000:00: root bus resource [io  0x0000-0x7fffff]
[    1.154409] pci_bus 0000:00: root bus resource [mem 0x50000000-0x57ffffff]
[    1.154415] pci_bus 0000:00: root bus resource [mem 0x4000000000-0x40ffffffff pref]
[    1.167603] pci 0000:03:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
[    1.168908] pci 0000:00:00.0: BAR 14: assigned [mem 0x50000000-0x501fffff]
[    1.168917] pci 0000:00:00.0: BAR 0: assigned [mem 0x4000000000-0x4000003fff 64bit pref]
[    1.168928] pci 0000:00:00.0: BAR 13: assigned [io  0x1000-0x2fff]
[    1.168937] pci 0000:01:00.0: BAR 14: assigned [mem 0x50000000-0x501fffff]
[    1.168944] pci 0000:01:00.0: BAR 13: assigned [io  0x1000-0x2fff]
[    1.168955] pci 0000:02:01.0: BAR 14: assigned [mem 0x50000000-0x500fffff]
[    1.168962] pci 0000:02:1f.0: BAR 14: assigned [mem 0x50100000-0x501fffff]
[    1.168968] pci 0000:02:01.0: BAR 13: assigned [io  0x1000-0x1fff]
[    1.168974] pci 0000:02:1f.0: BAR 13: assigned [io  0x2000-0x2fff]
[    1.168985] pci 0000:03:00.0: BAR 6: assigned [mem 0x50000000-0x5007ffff pref]
[    1.168993] pci 0000:03:00.0: BAR 2: assigned [mem 0x50080000-0x50083fff 64bit]
[    1.169016] pci 0000:03:00.0: BAR 0: assigned [mem 0x50084000-0x5008407f 64bit]
[    1.169038] pci 0000:03:00.0: BAR 4: assigned [io  0x1000-0x107f]
[    1.169050] pci 0000:02:01.0: PCI bridge to [bus 03]
[    1.169058] pci 0000:02:01.0:   bridge window [io  0x1000-0x1fff]
[    1.169071] pci 0000:02:01.0:   bridge window [mem 0x50000000-0x500fffff]
[    1.169091] pci 0000:02:02.0: PCI bridge to [bus 04]
[    1.169118] pci 0000:02:03.0: PCI bridge to [bus 05]
[    1.169145] pci 0000:02:0c.0: PCI bridge to [bus 06]
[    1.169173] pci 0000:02:10.0: PCI bridge to [bus 07]
[    1.169204] pci 0000:08:00.0: BAR 0: assigned [mem 0x50100000-0x50103fff 64bit]
[    1.169224] pci 0000:08:00.0: BAR 2: assigned [io  0x2000-0x20ff]
[    1.169234] pci 0000:02:1f.0: PCI bridge to [bus 08]
[    1.169241] pci 0000:02:1f.0:   bridge window [io  0x2000-0x2fff]
[    1.169254] pci 0000:02:1f.0:   bridge window [mem 0x50100000-0x501fffff]
[    1.169273] pci 0000:01:00.0: PCI bridge to [bus 02-08]
[    1.169280] pci 0000:01:00.0:   bridge window [io  0x1000-0x2fff]
[    1.169293] pci 0000:01:00.0:   bridge window [mem 0x50000000-0x501fffff]
[    1.169312] pci 0000:00:00.0: PCI bridge to [bus 01-08]
[    1.169318] pci 0000:00:00.0:   bridge window [io  0x1000-0x2fff]
[    1.169325] pci 0000:00:00.0:   bridge window [mem 0x50000000-0x501fffff]
[    1.169595] pcieport 0000:00:00.0: Signaling PME with IRQ 48
[    1.169735] pcieport 0000:00:00.0: AER enabled with IRQ 48
[    1.175210] dma-pl330 7ff00000.dma: Loaded driver for PL330 DMAC-341330
[    1.175217] dma-pl330 7ff00000.dma:  DBUFF-1024x16bytes Num_Chans-8 Num_Peri-8 Num_Events-8
[    1.176310] xenfs: not registering filesystem on non-xen platform
[    1.179894] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[    1.181440] SuperH (H)SCI(F) driver initialized
[    1.181754] msm_serial: driver initialized
[    1.191037] loop: module loaded
[    1.191507] hisi_sas: driver version v1.6
[    1.192022] sata_sil24 0000:03:00.0: enabling device (0000 -> 0003)
[    1.193305] scsi host0: sata_sil24
[    1.193600] scsi host1: sata_sil24
[    1.193758] ata1: SATA max UDMA/100 host m128@0x50084000 port 0x50080000 irq 55
[    1.193765] ata2: SATA max UDMA/100 host m128@0x50084000 port 0x50082000 irq 55
[    1.195521] libphy: Fixed MDIO Bus: probed
[    1.196456] tun: Universal TUN/TAP device driver, 1.6
[    1.196458] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    1.197705] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
[    1.197707] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[    1.197806] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.4.0-k
[    1.197808] igb: Copyright (c) 2007-2014 Intel Corporation.
[    1.197899] igbvf: Intel(R) Gigabit Virtual Function Network Driver - version 2.4.0-k
[    1.197901] igbvf: Copyright (c) 2009 - 2012 Intel Corporation.
[    1.197991] sky2: driver version 1.30
[    1.198113] sky2 0000:08:00.0: enabling device (0000 -> 0003)
[    1.198170] sky2 0000:08:00.0: Yukon-2 UL 2 chip revision 0
[    1.198231] sky2 0000:08:00.0 (unnamed net_device) (uninitialized): Invalid MAC address, defaulting to random
[    1.198946] sky2 0000:08:00.0 eth0: addr 22:11:0e:e2:0b:9e
[    1.224823] libphy: smsc911x-mdio: probed
[    1.225191] smsc911x 18000000.ethernet eth1: MAC Address: 00:02:f7:00:6b:c5
[    1.225301] usbcore: registered new interface driver catc
[    1.225341] usbcore: registered new interface driver kaweth
[    1.225344] pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver
[    1.225382] usbcore: registered new interface driver pegasus
[    1.225420] usbcore: registered new interface driver rtl8150
[    1.225466] usbcore: registered new interface driver r8152
[    1.225508] usbcore: registered new interface driver lan78xx
[    1.225552] usbcore: registered new interface driver asix
[    1.225591] usbcore: registered new interface driver ax88179_178a
[    1.225630] usbcore: registered new interface driver cdc_ether
[    1.225667] usbcore: registered new interface driver cdc_eem
[    1.225709] usbcore: registered new interface driver dm9601
[    1.225746] usbcore: registered new interface driver sr9700
[    1.225792] usbcore: registered new interface driver CoreChips
[    1.225842] usbcore: registered new interface driver smsc75xx
[    1.225891] usbcore: registered new interface driver smsc95xx
[    1.225932] usbcore: registered new interface driver gl620a
[    1.225969] usbcore: registered new interface driver net1080
[    1.226009] usbcore: registered new interface driver plusb
[    1.226047] usbcore: registered new interface driver rndis_host
[    1.226084] usbcore: registered new interface driver cdc_subset
[    1.226126] usbcore: registered new interface driver MOSCHIP usb-ethernet driver
[    1.226169] usbcore: registered new interface driver cx82310_eth
[    1.226216] usbcore: registered new interface driver cdc_ncm
[    1.226254] usbcore: registered new interface driver huawei_cdc_ncm
[    1.226292] usbcore: registered new interface driver cdc_mbim
[    1.226458] VFIO - User Level meta-driver version: 0.3
[    1.227619] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.227623] ehci-pci: EHCI PCI platform driver
[    1.227670] ehci-platform: EHCI generic platform driver
[    1.227807] ehci-platform 7ffc0000.ehci: EHCI Host Controller
[    1.227828] ehci-platform 7ffc0000.ehci: new USB bus registered, assigned bus number 1
[    1.228031] ehci-platform 7ffc0000.ehci: irq 24, io mem 0x7ffc0000
[    1.240516] ehci-platform 7ffc0000.ehci: USB 2.0 started, EHCI 1.00
[    1.241146] hub 1-0:1.0: USB hub found
[    1.241184] hub 1-0:1.0: 1 port detected
[    1.241504] ehci-exynos: EHCI EXYNOS driver
[    1.241589] ehci-msm: Qualcomm On-Chip EHCI Host Controller
[    1.241662] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    1.241696] ohci-pci: OHCI PCI platform driver
[    1.241748] ohci-platform: OHCI generic platform driver
[    1.241847] ohci-platform 7ffb0000.ohci: Generic Platform OHCI controller
[    1.241863] ohci-platform 7ffb0000.ohci: new USB bus registered, assigned bus number 2
[    1.241969] ohci-platform 7ffb0000.ohci: irq 23, io mem 0x7ffb0000
[    1.317005] hub 2-0:1.0: USB hub found
[    1.317030] hub 2-0:1.0: 1 port detected
[    1.317340] ohci-exynos: OHCI EXYNOS driver
[    1.317754] usbcore: registered new interface driver cdc_wdm
[    1.317848] usbcore: registered new interface driver usb-storage
[    1.318994] mousedev: PS/2 mouse device common for all mice
[    1.319749] rtc-pl031 1c170000.rtc: rtc core: registered pl031 as rtc0
[    1.320186] i2c /dev entries driver
[    1.323888] mmci-pl18x 1c050000.mmci: mmc0: PL180 manf 41 rev0 at 0x1c050000 irq 28,0 (pio)
[    1.323898] mmci-pl18x 1c050000.mmci: DMA channels RX none, TX none
[    1.360945] sdhci: Secure Digital Host Controller Interface driver
[    1.360948] sdhci: Copyright(c) Pierre Ossman
[    1.361441] Synopsys Designware Multimedia Card Interface Driver
[    1.364959] sdhci-pltfm: SDHCI platform and OF driver helper
[    1.365630] leds-syscon 1c010000.apbregs:led0: registered LED vexpress:0
[    1.365744] leds-syscon 1c010000.apbregs:led1: registered LED vexpress:1
[    1.365845] leds-syscon 1c010000.apbregs:led2: registered LED vexpress:2
[    1.365941] leds-syscon 1c010000.apbregs:led3: registered LED vexpress:3
[    1.366042] leds-syscon 1c010000.apbregs:led4: registered LED vexpress:4
[    1.366142] leds-syscon 1c010000.apbregs:led5: registered LED vexpress:5
[    1.366245] leds-syscon 1c010000.apbregs:led6: registered LED vexpress:6
[    1.366344] leds-syscon 1c010000.apbregs:led7: registered LED vexpress:7
[    1.369301] ledtrig-cpu: registered to indicate activity on CPUs
[    1.370214] usbcore: registered new interface driver usbhid
[    1.370216] usbhid: USB HID core driver
[    1.370278] mhu 2b1f0000.mhu: ARM MHU Mailbox registered
[    1.374229] NET: Registered protocol family 17
[    1.374305] 9pnet: Installing 9P2000 support
[    1.374399] Key type dns_resolver registered
[    1.375091] registered taskstats version 1
[    1.377668] scpi_protocol scpi: SCP Protocol 1.0 Firmware 1.11.1 version
[    1.384741] cpu cpu0: bL_cpufreq_init: CPU 0 initialized
[    1.387465] cpu cpu1: bL_cpufreq_init: CPU 1 initialized
[    1.389976] arm_big_little: bL_cpufreq_register: Registered platform driver: scpi
[    1.442176] input: smb@08000000:motherboard:gpio_keys as /devices/platform/smb@08000000/smb@08000000:motherboard/smb@08000000:motherboard:gpio_keys/input/input1
[    1.444521] rtc-pl031 1c170000.rtc: setting system clock to 2017-03-16 16:05:05 UTC (1489680305)
[    1.444633] ALSA device list:
[    1.444635]   No soundcards found.
[    1.564601] usb 1-1: new high-speed USB device number 2 using ehci-platform
[    1.722535] hub 1-1:1.0: USB hub found
[    1.722763] hub 1-1:1.0: 4 ports detected
[    2.012599] usb 1-1.1: new full-speed USB device number 3 using ehci-platform
[    2.123886] usb-storage 1-1.1:1.0: USB Mass Storage device detected
[    2.124551] usb-storage 1-1.1:1.0: Quirks match for vid c251 pid 4003: 80
[    2.125241] scsi host2: usb-storage 1-1.1:1.0
[    2.159853] uart-pl011 7ff80000.uart: no DMA platform data
[    2.332533] atkbd serio0: keyboard reset failed on 1c060000.kmi
[    2.476482] usb 1-1.2: new high-speed USB device number 4 using ehci-platform
[    2.608412] usb-storage 1-1.2:1.0: USB Mass Storage device detected
[    2.615507] scsi host3: usb-storage 1-1.2:1.0
[    3.138135] scsi 2:0:0:0: Direct-Access     ARM V2M- JUNO 1.0              PQ: 0 ANSI: 0
[    3.147123] sd 2:0:0:0: [sda] 3921920 512-byte logical blocks: (2.01 GB/1.87 GiB)
[    3.155584] random: fast init done
[    3.158995] sd 2:0:0:0: [sda] Write Protect is off
[    3.164865] sd 2:0:0:0: [sda] No Caching mode page found
[    3.170144] sd 2:0:0:0: [sda] Assuming drive cache: write through
[    3.184983]  sda: sda1
[    3.192348] sd 2:0:0:0: [sda] Attached SCSI removable disk
[    3.379010] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 0)
[    3.508934] ata1.00: ATA-8: SAMSUNG SSD PM830 2.5" 7mm 128GB, CXM03D1Q, max UDMA/133
[    3.516645] ata1.00: 250069680 sectors, multi 16: LBA48 NCQ (depth 31/32)
[    3.524660] ata1.00: configured for UDMA/100
[    3.530485] scsi 0:0:0:0: Direct-Access     ATA      SAMSUNG SSD PM83 3D1Q PQ: 0 ANSI: 5
[    3.539728] sd 0:0:0:0: [sdb] 250069680 512-byte logical blocks: (128 GB/119 GiB)
[    3.547188] sd 0:0:0:0: [sdb] Write Protect is off
[    3.552006] sd 0:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    3.563555]  sdb: sdb1 sdb2 sdb3
[    3.567809] sd 0:0:0:0: [sdb] Attached SCSI disk
[    3.584596] atkbd serio1: keyboard reset failed on 1c070000.kmi
[    4.334386] scsi 3:0:0:0: Direct-Access     JetFlash Transcend 16GB   1100 PQ: 0 ANSI: 6
[    4.344075] sd 3:0:0:0: [sdc] 30851072 512-byte logical blocks: (15.8 GB/14.7 GiB)
[    4.352440] sd 3:0:0:0: [sdc] Write Protect is off
[    4.358191] sd 3:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    4.380009]  sdc: sdc1 sdc2 sdc3
[    4.388190] sd 3:0:0:0: [sdc] Attached SCSI removable disk
[    5.588624] ata2: SATA link down (SStatus 0 SControl 0)
[    5.594856] EXT4-fs (sdb2): couldn't mount as ext3 due to feature incompatibilities
[    5.604892] EXT4-fs (sdb2): INFO: recovery required on readonly filesystem
[    5.611707] EXT4-fs (sdb2): write access will be enabled during recovery
[    5.633073] coresight-etm4x 22140000.etm: ETM 4.0 initialized
[    5.639752] coresight-etm4x 23140000.etm: ETM 4.0 initialized
[    5.645947] coresight-etm4x 23240000.etm: ETM 4.0 initialized
[    5.652157] coresight-etm4x 23340000.etm: ETM 4.0 initialized
[    5.658092] coresight-replicator-qcom 20120000.replicator: REPLICATOR 1.0 initialized
[    5.667021] coresight-stm 20100000.stm: STM500 initialized
[    5.672960] coresight-etm4x 22040000.etm: ETM 4.0 initialized
[    5.678969] coresight-etm4x 23040000.etm: ETM 4.0 initialized
[    6.075836] EXT4-fs (sdb2): recovery complete
[    6.084194] EXT4-fs (sdb2): mounted filesystem with ordered data mode. Opts: (null)
[    6.091809] VFS: Mounted root (ext4 filesystem) readonly on device 8:18.
[    6.100849] devtmpfs: mounted
[    6.104361] Freeing unused kernel memory: 1472K
[    6.235706] ip_tables: Unknown symbol xt_compat_unlock (err 0)
[    6.241511] ip_tables: Unknown symbol xt_free_table_info (err 0)
[    6.247479] ip_tables: Unknown symbol xt_match_to_user (err 0)
[    6.253266] ip_tables: Unknown symbol xt_alloc_table_info (err 0)
[    6.259315] ip_tables: Unknown symbol xt_percpu_counter_free (err 0)
[    6.265617] ip_tables: Unknown symbol xt_find_jump_offset (err 0)
[    6.271656] ip_tables: Unknown symbol xt_check_match (err 0)
[    6.277275] ip_tables: Unknown symbol xt_compat_match_from_user (err 0)
[    6.283833] ip_tables: Unknown symbol xt_request_find_target (err 0)
[    6.290131] ip_tables: Unknown symbol xt_unregister_matches (err 0)
[    6.296348] ip_tables: Unknown symbol xt_request_find_match (err 0)
[    6.302565] ip_tables: Unknown symbol xt_tee_enabled (err 0)
[    6.308183] ip_tables: Unknown symbol xt_compat_add_offset (err 0)
[    6.314311] ip_tables: Unknown symbol xt_compat_init_offsets (err 0)
[    6.320607] ip_tables: Unknown symbol xt_unregister_targets (err 0)
[    6.326817] ip_tables: Unknown symbol xt_recseq (err 0)
[    6.331995] ip_tables: Unknown symbol xt_compat_calc_jump (err 0)
[    6.338033] ip_tables: Unknown symbol xt_compat_flush_offsets (err 0)
[    6.344417] ip_tables: Unknown symbol xt_compat_target_from_user (err 0)
[    6.351058] ip_tables: Unknown symbol xt_register_targets (err 0)
[    6.357100] ip_tables: Unknown symbol xt_compat_check_entry_offsets (err 0)
[    6.364016] ip_tables: Unknown symbol xt_compat_match_to_user (err 0)
[    6.370398] ip_tables: Unknown symbol xt_alloc_entry_offsets (err 0)
[    6.376694] ip_tables: Unknown symbol xt_target_to_user (err 0)
[    6.382562] ip_tables: Unknown symbol xt_register_table (err 0)
[    6.388428] ip_tables: Unknown symbol xt_proto_init (err 0)
[    6.393952] ip_tables: Unknown symbol xt_replace_table (err 0)
[    6.399732] ip_tables: Unknown symbol xt_find_table_lock (err 0)
[    6.405693] ip_tables: Unknown symbol xt_compat_target_offset (err 0)
[    6.412075] ip_tables: Unknown symbol xt_table_unlock (err 0)
[    6.417769] ip_tables: Unknown symbol xt_proto_fini (err 0)
[    6.423295] ip_tables: Unknown symbol xt_check_entry_offsets (err 0)
[    6.429592] ip_tables: Unknown symbol xt_compat_target_to_user (err 0)
[    6.436061] ip_tables: Unknown symbol xt_percpu_counter_alloc (err 0)
[    6.442443] ip_tables: Unknown symbol xt_compat_match_offset (err 0)
[    6.448740] ip_tables: Unknown symbol xt_register_matches (err 0)
[    6.454778] ip_tables: Unknown symbol xt_check_target (err 0)
[    6.460480] ip_tables: Unknown symbol xt_find_revision (err 0)
[    6.466260] ip_tables: Unknown symbol xt_compat_lock (err 0)
[    6.471869] ip_tables: Unknown symbol xt_copy_counters_from_user (err 0)
[    6.478509] ip_tables: Unknown symbol xt_unregister_table (err 0)
[    6.563153] systemd[1]: systemd 232 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN)
[    6.581366] systemd[1]: Detected architecture arm64.

Welcome to Debian GNU/Linux 9 (stretch)!

[    6.600944] systemd[1]: Set hostname to <juno>.
[    6.722756] systemd[1]: Set up automount bootjuno.automount.
[  OK  ] Set up automount bootjuno.automount.
[    6.740734] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[  OK  ] Started Dispatch Password Requests to Console Directory Watch.
[    6.765286] systemd[1]: Created slice User and Session Slice.
[  OK  ] Created slice User and Session Slice.
[    6.784940] systemd[1]: Listening on udev Control Socket.
[  OK  ] Listening on udev Control Socket.
[    6.804815] systemd[1]: Listening on RPCbind Server Activation Socket.
[  OK  ] Listening on RPCbind Server Activation Socket.
[    6.824865] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[  OK  ] Listening on /dev/initctl Compatibility Named Pipe.
[    6.845151] systemd[1]: Created slice System Slice.
[  OK  ] Created slice System Slice.
         Mounting Huge Pages File System...
[  OK  ] Created slice system-getty.slice.
         Mounting RPC Pipe File System...
[  OK  ] Listening on Syslog Socket.
[  OK  ] Created slice system-serial\x2dgetty.slice.
         Mounting Debug File System...
[  OK  ] Listening on fsck to fsckd communication Socket.
[  OK  ] Set up automount mnt.automount.
[  OK  ] Listening on udev Kernel Socket.
[  OK  ] Listening on Journal Socket.
         Starting File System Check on Root Device...
         Starting Load Kernel Modules...
[  OK  ] Listening on Journal Socket (/dev/log).
[  OK  ] Started Forward Password Requests to Wall Directory Watch.
[  OK  ] Reached target Encrypted Volumes.
[  OK  ] Reached target Paths.
[  OK  ] Reached target Slices.
[  OK  ] Listening on Journal Audit Socket.
         Starting Journal Service...
         Mounting POSIX Message Queue File System...
         Starting Create list of required st…ce nodes for the current kernel...
[  OK  ] Mounted RPC Pipe File System.
[  OK  ] Mounted Debug File System.
[  OK  ] Mounted Huge Pages File System.
[  OK  ] Mounted POSIX Message Queue File System.
[  OK  ] Started File System Check on Root Device.
[  OK  ] Started Load Kernel Modules.
[  OK  ] Started Create list of required sta…vice nodes for the current kernel.
[  OK  ] Started Journal Service.
[  OK  ] Started File System Check Daemon to report status.
         Starting Create Static Device Nodes in /dev...
         Mounting Configuration File System...
         Starting Apply Kernel Variables...
         Starting Remount Root and Kernel File Systems...
[  OK  ] Mounted Configuration File System.
[  OK  ] Started Create Static Device Nodes in /dev.
[  OK  ] Started Apply Kernel Variables.
         Starting udev Kernel Device Manager...
[  OK  ] Started udev Kernel Device Manager.
[    8.820513] EXT4-fs (sdb2): re-mounted. Opts: errors=remount-ro
[  OK  ] Started Remount Root and Kernel File Systems.
         Starting udev Coldplug all Devices...
[  OK  ] Reached target Local File Systems (Pre).
         Starting Flush Journal to Persistent Storage...
         Starting Load/Save Random Seed...
[  OK  ] Started Load/Save Random Seed.
[    8.937949] systemd-journald[1379]: Received request to flush runtime journal from PID 1
[  OK  ] Started Flush Journal to Persistent Storage.
[  OK  ] Started udev Coldplug all Devices.
[  OK  ] Found device /dev/ttyAMA0.
[    9.082724] sky2 0000:08:00.0 enp8s0: renamed from eth0
[  OK  ] Found device SAMSUNG_SSD_PM830_2.5__7mm_128GB 1.
[  OK  ] Found device SAMSUNG_SSD_PM830_2.5__7mm_128GB 3.
[  OK  ] Found device SAMSUNG_SSD_PM830_2.5__7mm_128GB 3.
         Activating swap Swap Partition...
         Mounting /boot/efi...
[    9.226602] Adding 7956476k swap on /dev/sdb3.  Priority:-1 extents:1 across:7956476k SS
[    9.234049] FAT-fs (sdb1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[  OK  ] Mounted /boot/efi.
[  OK  ] Activated swap Swap Partition.
[  OK  ] Activated swap /dev/disk/by-uuid/7be1d36c-df3c-486a-8ffa-4f94bb3df1a9.
[  OK  ] Reached target Swap.
[  OK  ] Reached target Local File Systems.
[  OK  ] Started ifup for eth1.
         Starting Preprocess NFS configuration...
         Starting Raise network interfaces...
         Starting Create Volatile Files and Directories...
         Starting Enable support for additional executable binary formats...
[    9.392860] random: crng init done
[  OK  ] Started Preprocess NFS configuration.
[  OK  ] Started Create Volatile Files and Directories.
[  OK  ] Started Enable support for additional executable binary formats.
[    9.464863] Generic PHY 18000000.ethernet-ffffffff:01: attached PHY driver [Generic PHY] (mii_bus:phy_addr=18000000.ethernet-ffffffff:01, irq=-1)
         Starting Update UTMP about System Boot/Shutdown...
[    9.488747] smsc911x 18000000.ethernet eth1: SMSC911x/921x identified at 0xffff000009280000, IRQ: 27
         Starting Network Time Synchronization...
         Starting RPC bind portmap service...
[  OK  ] Reached target NFS client services.
[  OK  ] Started Update UTMP about System Boot/Shutdown.
[  OK  ] Started RPC bind portmap service.
[  OK  ] Reached target Remote File Systems (Pre).
[  OK  ] Reached target Remote File Systems.
[  OK  ] Reached target RPC Port Mapper.
[  OK  ] Started Network Time Synchronization.
[  OK  ] Reached target System Time Synchronized.
[  OK  ] Reached target System Initialization.
[  OK  ] Started Daily Cleanup of Temporary Directories.
[  OK  ] Listening on D-Bus System Message Bus Socket.
[  OK  ] Reached target Sockets.
[  OK  ] Reached target Basic System.
         Starting System Logging Service...
[  OK  ] Started Deferred execution scheduler.
[  OK  ] Started Regular background program processing daemon.
[  OK  ] Started D-Bus System Message Bus.
[  OK  ] Started Daily apt activities.
[  OK  ] Reached target Timers.
         Starting Login Service...
[  OK  ] Started irqbalance daemon.
[  OK  ] Started System Logging Service.
         Starting Daily apt activities...
[  OK  ] Started Login Service.
[  OK  ] Started Raise network interfaces.
[  OK  ] Reached target Network.
         Starting OpenBSD Secure Shell server...
[  OK  ] Reached target Network is Online.
         Starting LSB: exim Mail Transport Agent...
         Starting Permit User Sessions...
         Starting /etc/rc.local Compatibility...
[  OK  ] Started OpenBSD Secure Shell server.
[  OK  ] Started Permit User Sessions.
[  OK  ] Started /etc/rc.local Compatibility.
[  OK  ] Started Serial Getty on ttyAMA0.
[  OK  ] Started Getty on tty1.
[  OK  ] Reached target Login Prompts.
[  OK  ] Started Daily apt activities.
[  OK  ] Started LSB: exim Mail Transport Agent.
[  OK  ] Reached target Multi-User System.
[  OK  ] Reached target Graphical Interface.
         Starting Update UTMP about System Runlevel Changes...
[  OK  ] Started Update UTMP about System Runlevel Changes.

Debian GNU/Linux 9 juno ttyAMA0

juno login: root
Password: [   16.513019] systemd[1]: apt-daily.timer: Adding 1h 48min 28.800315s random time.

Last login: Wed Mar 15 17:57:12 CDT 2017 on ttyAMA0

The programs included with the Debian GNU/Linux system are free software;
the exact distribution terms for each program are described in the
individual files in /usr/share/doc/*/copyright.

Debian GNU/Linux comes with ABSOLUTELY NO WARRANTY, to the extent
permitted by applicable law.
 oot@juno:~# #taskset -c 2 ./perf record
root@juno:~# resize
COLUMNS=116;
LINES=40;
export COLUMNS LINES;
root@juno:~# taskset -c 2 ./perf record -e cs_etm/@20070000.etr/u --per-thread taskset -c 2 uname
[   73.067323] coresight-replicator-qcom 20120000.replicator: REPLICATOR enabled
[   73.074400] coresight-funnel 20150000.funnel: FUNNEL inport 0 enabled
[   73.080791] coresight-tmc 20010000.etf: TMC-ETF enabled
[   73.085969] coresight-funnel 20040000.funnel: FUNNEL inport 0 enabled
[   73.092362] coresight-funnel 220c0000.funnel: FUNNEL inport 1 enabled
[   73.109597] coresight-funnel 220c0000.funnel: FUNNEL inport 1 disabled
[   73.116066] coresight-funnel 20040000.funnel: FUNNEL inport 0 disabled
[   73.122547] coresight-tmc 20010000.etf: TMC disabled
[   73.127464] coresight-funnel 20150000.funnel: FUNNEL inport 0 disabled
[   73.133925] coresight-replicator-qcom 20120000.replicator: REPLICATOR disabled
[   73.141092] coresight-tmc 20070000.etr: TMC-ETR disabled
[   73.146873] coresight-replicator-qcom 20120000.replicator: REPLICATOR enabled
[   73.153942] coresight-funnel 20150000.funnel: FUNNEL inport 0 enabled
[   73.160331] coresight-tmc 20010000.etf: TMC-ETF enabled
[   73.165508] coresight-funnel 20040000.funnel: FUNNEL inport 0 enabled
[   73.171901] coresight-funnel 220c0000.funnel: FUNNEL inport 1 enabled
[   73.179046] coresight-funnel 220c0000.funnel: FUNNEL inport 1 disabled
[   73.185513] coresight-funnel 20040000.funnel: FUNNEL inport 0 disabled
[   73.191994] coresight-tmc 20010000.etf: TMC disabled
[   73.196909] coresight-funnel 20150000.funnel: FUNNEL inport 0 disabled
[   73.203371] coresight-replicator-qcom 20120000.replicator: REPLICATOR disabled
[   73.210537] coresight-tmc 20070000.etr: TMC-ETR disabled
[   73.216282] coresight-replicator-qcom 20120000.replicator: REPLICATOR enabled
[   73.223351] coresight-funnel 20150000.funnel: FUNNEL inport 0 enabled
[   73.229739] coresight-tmc 20010000.etf: TMC-ETF enabled
[   73.234915] coresight-funnel 20040000.funnel: FUNNEL inport 0 enabled
[   73.241309] coresight-funnel 220c0000.funnel: FUNNEL inport 1 enabled
[   73.248667] coresight-funnel 220c0000.funnel: FUNNEL inport 1 disabled
[   73.255134] coresight-funnel 20040000.funnel: FUNNEL inport 0 disabled
[   73.261616] coresight-tmc 20010000.etf: TMC disabled
[   73.266531] coresight-funnel 20150000.funnel: FUNNEL inport 0 disabled
[   73.272993] coresight-replicator-qcom 20120000.replicator: REPLICATOR disabled
[   73.280160] coresight-tmc 20070000.etr: TMC-ETR disabled
[   73.285933] coresight-replicator-qcom 20120000.replicator: REPLICATOR enabled
[   73.293003] coresight-funnel 20150000.funnel: FUNNEL inport 0 enabled
[   73.299391] coresight-tmc 20010000.etf: TMC-ETF enabled
[   73.304568] coresight-funnel 20040000.funnel: FUNNEL inport 0 enabled
[   73.310962] coresight-funnel 220c0000.funnel: FUNNEL inport 1 enabled
Linux
[   73.327157] coresight-funnel 220c0000.funnel: FUNNEL inport 1 disabled
[   73.333624] coresight-funnel 20040000.funnel: FUNNEL inport 0 disabled
[   73.340105] coresight-tmc 20010000.etf: TMC disabled
[   73.345022] coresight-funnel 20150000.funnel: FUNNEL inport 0 disabled
[   73.351483] coresight-replicator-qcom 20120000.replicator: REPLICATOR disabled
[   73.358650] coresight-tmc 20070000.etr: TMC-ETR disabled

[ perf record: Woken up 2 times to write data ]
[ perf record: Captured and wrote