Kernel-build-reports February 2014

kernel-build-reports@lists.linaro.org

9 participants
404 discussions

queue boot: 35 pass, 2 fail (v3.13.1-138-g92f1cc2)

by Kevin's boot bot

Automated DT boot report for various ARM defconfigs. Tree/Branch: queue Git describe: v3.13.1-138-g92f1cc2 Failed boot tests (console logs at the end) =========================================== armada-370-mirabox: FAIL: multi_v7_defconfig armada-xp-openblocks-ax3-4: FAIL: multi_v7_defconfig Full Report =========== omap2plus_defconfig ------------------- am335x-boneblack PASS: 0 min 25.8 sec omap3-beagle-xm PASS: 0 min 58.9 sec am335x-bone PASS: 0 min 27.4 sec omap4-panda PASS: 1 min 10.8 sec omap4-panda-es PASS: 1 min 9.9 sec omap3-tobi,3730storm PASS: 0 min 21.4 sec omap3-tobi,3530overo PASS: 0 min 22.6 sec multi_lpae_defconfig -------------------- sun7i-a20-cubieboard2 PASS: 0 min 13.5 sec tegra_defconfig --------------- tegra30-beaver PASS: 0 min 22.0 sec imx_v6_v7_defconfig ------------------- imx6dl-wandboard,wand-dual PASS: 0 min 18.5 sec imx6dl-wandboard,wand-solo PASS: 0 min 18.7 sec imx6q-wandboard PASS: 0 min 17.0 sec sunxi_defconfig --------------- sun7i-a20-cubieboard2 PASS: 0 min 11.8 sec sun4i-a10-cubieboard PASS: 0 min 12.6 sec bcm_defconfig ------------- bcm28155-ap PASS: 0 min 58.9 sec exynos_defconfig ---------------- exynos5250-arndale PASS: 0 min 30.8 sec multi_v7_defconfig ------------------ ste-snowball PASS: 0 min 29.8 sec tegra30-beaver PASS: 0 min 16.8 sec am335x-boneblack PASS: 0 min 22.4 sec omap3-beagle-xm PASS: 1 min 1.7 sec sun7i-a20-cubieboard2 PASS: 0 min 13.5 sec armada-370-mirabox FAIL: 0 min 26.6 sec omap4-panda PASS: 1 min 6.0 sec omap4-panda-es PASS: 1 min 7.0 sec armada-xp-openblocks-ax3-4 FAIL: 0 min 30.2 sec sun4i-a10-cubieboard PASS: 0 min 16.5 sec bcm28155-ap PASS: 0 min 58.8 sec imx6dl-wandboard,wand-solo PASS: 0 min 17.9 sec am335x-bone PASS: 0 min 24.1 sec imx6q-wandboard PASS: 0 min 17.4 sec omap3-tobi,3730storm PASS: 0 min 23.2 sec imx6dl-wandboard,wand-dual PASS: 0 min 17.6 sec omap3-tobi,3530overo PASS: 0 min 20.8 sec u8500_defconfig --------------- ste-snowball PASS: 0 min 30.9 sec sama5_defconfig --------------- sama5d35ek PASS: 0 min 17.4 sec mvebu_defconfig --------------- armada-xp-openblocks-ax3-4 PASS: 0 min 21.9 sec armada-370-mirabox PASS: 0 min 19.9 sec Console logs for failures ========================= multi_v7_defconfig ------------------ armada-370-mirabox: FAIL: last 80 lines of boot log: ---------------------------------------------------- phy16= 72 MMC: MRVL_MMC: 0 Net: egiga0 [PRIME], egiga1 Hit any key to stop autoboot: 3 0 Marvell>> Marvell>> version version U-Boot 2009.08 (Sep 16 2012 - 22:50:06)Marvell version: 1.1.2 NQ Marvell>> setenv bootargs console=ttyS0,115200 debug earlyprintk setenv bootargs console=ttyS0,115200 debug earlyprintk Marvell>> setenv initrd_high 0xffffffff setenv initrd_high 0xffffffff Marvell>> if test -n ${initenv}; then run initenv; fi if test -n ${initenv}; then run initenv; fi Marvell>>if test -n ${preboot}; then run preboot; fi if test -n ${preboot}; then run preboot; fi Marvell>> setenv autoload no; setenv autoboot no setenv autoload no; setenv autoboot no Marvell>> dhcp dhcp phyaddr= 0 BOOTP broadcast 1 DHCP client bound to address 192.168.1.183 Marvell>> setenv serverip 192.168.1.2 setenv serverip 192.168.1.2 Marvell>> if test -n ${netargs}; then run netargs; fi if test -n ${netargs}; then run netargs; fi Marvell>> tftp 0x02000000 192.168.1.2:tmp/mirabox-o0LpPI/tmpEKHCgw-uImage tftp 0x02000000 192.168.1.2:tmp/mirabox-o0LpPI/tmpEKHCgw-uImage Using egiga0 device TFTP from server 192.168.1.2; our IP address is 192.168.1.183 Filename 'tmp/mirabox-o0LpPI/tmpEKHCgw-uImage'. Load address: 0x2000000 Loading: *################################################################# ################################################################# ################################################################# ###################################################### done Bytes transferred = 3654962 (37c532 hex) Marvell>> tftp 0x03000000 192.168.1.2:buildroot.cpio.gz.uboot tftp 0x03000000 192.168.1.2:buildroot.cpio.gz.uboot Using egiga0 device TFTP from server 192.168.1.2; our IP address is 192.168.1.183 Filename 'buildroot.cpio.gz.uboot'. Load address: 0x3000000 Loading: *############################################ done Bytes transferred = 639808 (9c340 hex) Marvell>> printenv bootargs printenv bootargs bootargs=console=ttyS0,115200 debug earlyprintk Marvell>> bootm 0x02000000 0x03000000 bootm 0x02000000 0x03000000 ## Booting kernel from Legacy Image at 02000000 ... Image Name: Linux Created: 2014-02-05 1:31:27 UTC Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 3654898 Bytes = 3.5 MB Load Address: 00008000 Entry Point: 00008000 Verifying Checksum ... OK ## Loading init Ramdisk from Legacy Image at 03000000 ... Image Name: Created: 2013-09-07 5:02:12 UTC Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 639744 Bytes = 624.8 kB Load Address: 81000000 Entry Point: 81000000 Verifying Checksum ... OK Loading Kernel Image ... OK OK Starting kernel ... ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 26.55 seconds. # PYBOOT: Result: FAIL armada-xp-openblocks-ax3-4: FAIL: last 80 lines of boot log: ------------------------------------------------------------ Net: egiga0, egiga1, egiga2, egiga3 Hit any key to stop autoboot: 1 0 openblocks> openblocks> version version U-Boot 2011.12 (Aug 26 2013 - 13:08:34) Plat'Home version: 2.0.7 (Marvell version: 2012_Q4.0p17) arm-marvell-linux-gnueabi-gcc (Linaro GCC branch-4.6.4. Marvell GCC 201301-1645.aee66e26) 4.6.4 20120731 (prerelease) GNU ld (Linaro GCC branch-4.6.4. Marvell GCC 201301-1645.aee66e26) 2.22.0.20120801 openblocks> setenv bootargs console=ttyS0,115200 debug earlyprintk setenv bootargs console=ttyS0,115200 debug earlyprintk openblocks> if test -n ${initenv}; then run initenv; fi if test -n ${initenv}; then run initenv; fi openblocks>if test -n ${preboot}; then run preboot; fi if test -n ${preboot}; then run preboot; fi openblocks> setenv autoload no; setenv autoboot no setenv autoload no; setenv autoboot no openblocks> dhcp dhcp BOOTP broadcast 1 BOOTP broadcast 2 DHCP client bound to address 192.168.1.158 openblocks> setenv serverip 192.168.1.2 setenv serverip 192.168.1.2 openblocks>if test -n ${netargs}; then run netargs; fi if test -n ${netargs}; then run netargs; fi openblocks> tftp 0x02000000 192.168.1.2:tmp/obsax3-VPL_3B/tmpVnO4sH-uImage tftp 0x02000000 192.168.1.2:tmp/obsax3-VPL_3B/tmpVnO4sH-uImage Using egiga0 device TFTP from server 192.168.1.2; our IP address is 192.168.1.158 Filename 'tmp/obsax3-VPL_3B/tmpVnO4sH-uImage'. Load address: 0x2000000 Loading: *################################################################# ################################################################# ################################################################# ####################################################### done Bytes transferred = 3659921 (37d891 hex) openblocks> tftp 0x03000000 192.168.1.2:buildroot.cpio.gz.uboot tftp 0x03000000 192.168.1.2:buildroot.cpio.gz.uboot Using egiga0 device TFTP from server 192.168.1.2; our IP address is 192.168.1.158 Filename 'buildroot.cpio.gz.uboot'. Load address: 0x3000000 Loading: *############################################ done Bytes transferred = 639808 (9c340 hex) openblocks> printenv bootargs printenv bootargs bootargs=console=ttyS0,115200 debug earlyprintk openblocks> bootm 0x02000000 0x03000000 bootm 0x02000000 0x03000000 ## Booting kernel from Legacy Image at 02000000 ... Image Name: Linux Created: 2014-02-05 1:11:47 UTC Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 3659857 Bytes = 3.5 MiB Load Address: 00008000 Entry Point: 00008000 Verifying Checksum ... OK ## Loading init Ramdisk from Legacy Image at 03000000 ... Image Name: Created: 2013-09-07 5:02:12 UTC Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 639744 Bytes = 624.8 KiB Load Address: 81000000 Entry Point: 81000000 Verifying Checksum ... OK Loading Kernel Image ... OK OK Starting kernel ... ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 30.25 seconds. # PYBOOT: Result: FAIL

10 years, 8 months

queue build: 11 warnings 0 failures (queue/v3.13.1-138-g92f1cc2)

by Olof's autobuilder

10 years, 8 months

mainline boot: 30 pass, 7 fail (v3.14-rc1-13-g878a876)

by Kevin's boot bot

Automated DT boot report for various ARM defconfigs. Tree/Branch: mainline Git describe: v3.14-rc1-13-g878a876 Failed boot tests (console logs at the end) =========================================== omap3-tobi,3730storm: FAIL: omap2plus_defconfig armada-370-mirabox: FAIL: multi_v7_defconfig armada-xp-openblocks-ax3-4: FAIL: multi_v7_defconfig omap3-tobi,3730storm: FAIL: multi_v7_defconfig ste-snowball: FAIL: u8500_defconfig armada-xp-openblocks-ax3-4: FAIL: mvebu_defconfig armada-370-mirabox: FAIL: mvebu_defconfig Full Report =========== omap2plus_defconfig ------------------- am335x-boneblack PASS: 0 min 25.9 sec omap3-beagle-xm PASS: 0 min 57.8 sec am335x-bone PASS: 0 min 27.7 sec omap4-panda PASS: 1 min 9.0 sec omap4-panda-es PASS: 1 min 11.5 sec omap3-tobi,3730storm FAIL: 1 min 17.8 sec omap3-tobi,3530overo PASS: 0 min 22.9 sec multi_lpae_defconfig -------------------- sun7i-a20-cubieboard2 PASS: 0 min 14.4 sec tegra_defconfig --------------- tegra30-beaver PASS: 0 min 17.0 sec imx_v6_v7_defconfig ------------------- imx6dl-wandboard,wand-dual PASS: 0 min 18.7 sec imx6dl-wandboard,wand-solo PASS: 0 min 18.6 sec imx6q-wandboard PASS: 0 min 17.2 sec sunxi_defconfig --------------- sun7i-a20-cubieboard2 PASS: 0 min 11.9 sec sun4i-a10-cubieboard PASS: 0 min 12.9 sec bcm_defconfig ------------- bcm28155-ap PASS: 0 min 58.9 sec exynos_defconfig ---------------- exynos5250-arndale PASS: 0 min 30.6 sec multi_v7_defconfig ------------------ ste-snowball PASS: 1 min 20.6 sec tegra30-beaver PASS: 0 min 16.9 sec am335x-boneblack PASS: 0 min 23.5 sec omap3-beagle-xm PASS: 0 min 51.2 sec sun7i-a20-cubieboard2 PASS: 0 min 14.1 sec armada-370-mirabox FAIL: 0 min 31.7 sec omap4-panda PASS: 0 min 49.8 sec omap4-panda-es PASS: 0 min 50.0 sec armada-xp-openblocks-ax3-4 FAIL: 0 min 22.8 sec sun4i-a10-cubieboard PASS: 0 min 14.3 sec bcm28155-ap PASS: 1 min 14.5 sec imx6dl-wandboard,wand-solo PASS: 0 min 17.9 sec am335x-bone PASS: 0 min 26.3 sec imx6q-wandboard PASS: 0 min 17.6 sec omap3-tobi,3730storm FAIL: 0 min 29.1 sec imx6dl-wandboard,wand-dual PASS: 0 min 18.0 sec omap3-tobi,3530overo PASS: 0 min 21.6 sec u8500_defconfig --------------- ste-snowball FAIL: 0 min 31.6 sec sama5_defconfig --------------- sama5d35ek PASS: 0 min 17.6 sec mvebu_defconfig --------------- armada-xp-openblocks-ax3-4 FAIL: 0 min 20.1 sec armada-370-mirabox FAIL: 0 min 31.6 sec Console logs for failures ========================= omap2plus_defconfig ------------------- omap3-tobi,3730storm: FAIL: last 80 lines of boot log: ------------------------------------------------------ [ 5.618743] Exception stack(0xde0efc68 to 0xde0efcb0) [ 5.624084] fc60: de1de000 de0efd84 fa0b4000 00000195 de1de000 de1de000 [ 5.632690] fc80: de1de000 de0efd2c de4c1b86 de4c1b80 de1de480 00000000 00000000 de0efcb0 [ 5.641326] fca0: c0437a38 c044eb1c 60000113 ffffffff [ 5.646667] [<c0549624>] (__irq_svc) from [<c044eb1c>] (omap_hsmmc_request+0xa8/0x4fc) [ 5.655029] [<c044eb1c>] (omap_hsmmc_request) from [<c0437a38>] (mmc_start_request+0xb8/0xd4) [ 5.664031] [<c0437a38>] (mmc_start_request) from [<c0437b60>] (__mmc_start_req+0x54/0x84) [ 5.672729] [<c0437b60>] (__mmc_start_req) from [<c0438000>] (mmc_wait_for_cmd+0x58/0x88) [ 5.681365] [<c0438000>] (mmc_wait_for_cmd) from [<c0441b38>] (mmc_io_rw_direct_host+0xa4/0x13c) [ 5.690643] [<c0441b38>] (mmc_io_rw_direct_host) from [<c04428fc>] (sdio_read_cis+0x168/0x298) [ 5.699737] [<c04428fc>] (sdio_read_cis) from [<c0440de0>] (mmc_sdio_init_card+0x3e0/0xaa4) [ 5.708526] [<c0440de0>] (mmc_sdio_init_card) from [<c04417ac>] (mmc_attach_sdio+0x78/0x360) [ 5.717437] [<c04417ac>] (mmc_attach_sdio) from [<c043a318>] (mmc_rescan+0x260/0x2e8) [ 5.725708] [<c043a318>] (mmc_rescan) from [<c00591c4>] (process_one_work+0x1ac/0x4c4) [ 5.734069] [<c00591c4>] (process_one_work) from [<c005a05c>] (worker_thread+0x114/0x3b4) [ 5.742706] [<c005a05c>] (worker_thread) from [<c005fc50>] (kthread+0xcc/0xe8) [ 5.750305] [<c005fc50>] (kthread) from [<c000e548>] (ret_from_fork+0x14/0x2c) [ 5.757934] ---[ end trace 1bfd1d39aea85ad8 ]--- [ 5.762908] In-band Error seen by MPU at address 0 [ 5.768066] ------------[ cut here ]------------ [ 5.772918] WARNING: CPU: 0 PID: 6 at /home/build/work/batch/drivers/bus/omap_l3_smx.c:162 omap3_l3_app_irq+0xcc/0x120() [ 5.784393] Modules linked in: [ 5.787628] CPU: 0 PID: 6 Comm: kworker/u2:0 Tainted: G D W 3.14.0-rc1-00013-g878a876 #1 [ 5.796874] Workqueue: kmmcd mmc_rescan [ 5.800964] [<c0015410>] (unwind_backtrace) from [<c001200c>] (show_stack+0x10/0x14) [ 5.809143] [<c001200c>] (show_stack) from [<c0542bc0>] (dump_stack+0x7c/0x94) [ 5.816741] [<c0542bc0>] (dump_stack) from [<c00404a8>] (warn_slowpath_common+0x6c/0x90) [ 5.825286] [<c00404a8>] (warn_slowpath_common) from [<c0040568>] (warn_slowpath_null+0x1c/0x24) [ 5.834564] [<c0040568>] (warn_slowpath_null) from [<c02f9620>] (omap3_l3_app_irq+0xcc/0x120) [ 5.843566] [<c02f9620>] (omap3_l3_app_irq) from [<c00904fc>] (handle_irq_event_percpu+0x5c/0x21c) [ 5.852996] [<c00904fc>] (handle_irq_event_percpu) from [<c00906f8>] (handle_irq_event+0x3c/0x5c) [ 5.862365] [<c00906f8>] (handle_irq_event) from [<c0092ff0>] (handle_level_irq+0xac/0x118) [ 5.871185] [<c0092ff0>] (handle_level_irq) from [<c008fc84>] (generic_handle_irq+0x28/0x3c) [ 5.880096] [<c008fc84>] (generic_handle_irq) from [<c000eda8>] (handle_IRQ+0x4c/0xb4) [ 5.888458] [<c000eda8>] (handle_IRQ) from [<c00085b4>] (omap3_intc_handle_irq+0x60/0x74) [ 5.897064] [<c00085b4>] (omap3_intc_handle_irq) from [<c0549624>] (__irq_svc+0x44/0x5c) [ 5.905609] Exception stack(0xde0efc60 to 0xde0efca8) [ 5.910949] fc60: de1de480 de0efd84 00000000 00000000 00000001 00000001 de1de000 de0efd2c [ 5.919555] fc80: de4c1b86 de4c1b80 de1de480 00000000 00000195 de0efca8 c044eb28 c044c490 [ 5.928192] fca0: 60000113 ffffffff [ 5.931884] [<c0549624>] (__irq_svc) from [<c044c490>] (omap_hsmmc_start_command+0xe0/0xf8) [ 5.940704] [<c044c490>] (omap_hsmmc_start_command) from [<de0efd40>] (0xde0efd40) [ 5.948669] ---[ end trace 1bfd1d39aea85ad9 ]--- [ 5.953613] In-band Error seen by MPU at address 0 [ 5.958740] ------------[ cut here ]------------ [ 5.963623] WARNING: CPU: 0 PID: 6 at /home/build/work/batch/drivers/bus/omap_l3_smx.c:162 omap3_l3_app_irq+0xcc/0x120() [ 5.975067] Modules linked in: [ 5.978302] CPU: 0 PID: 6 Comm: kworker/u2:0 Tainted: G D W 3.14.0-rc1-00013-g878a876 #1 [ 5.987579] Workqueue: kmmcd mmc_rescan [ 5.991638] [<c0015410>] (unwind_backtrace) from [<c001200c>] (show_stack+0x10/0x14) [ 5.999816] [<c001200c>] (show_stack) from [<c0542bc0>] (dump_stack+0x7c/0x94) [ 6.007446] [<c0542bc0>] (dump_stack) from [<c00404a8>] (warn_slowpath_common+0x6c/0x90) [ 6.015991] [<c00404a8>] (warn_slowpath_common) from [<c0040568>] (warn_slowpath_null+0x1c/0x24) [ 6.025268] [<c0040568>] (warn_slowpath_null) from [<c02f9620>] (omap3_l3_app_irq+0xcc/0x120) [ 6.034271] [<c02f9620>] (omap3_l3_app_irq) from [<c00904fc>] (handle_irq_event_percpu+0x5c/0x21c) [ 6.043701] [<c00904fc>] (handle_irq_event_percpu) from [<c00906f8>] (handle_irq_event+0x3c/0x5c) [ 6.053070] [<c00906f8>] (handle_irq_event) from [<c0092ff0>] (handle_level_irq+0xac/0x118) [ 6.061889] [<c0092ff0>] (handle_level_irq) from [<c008fc84>] (generic_handle_irq+0x28/0x3c) [ 6.070770] [<c008fc84>] (generic_handle_irq) from [<c000eda8>] (handle_IRQ+0x4c/0xb4) [ 6.079132] [<c000eda8>] (handle_IRQ) from [<c00085b4>] (omap3_intc_handle_irq+0x60/0x74) [ 6.087768] [<c00085b4>] (omap3_intc_handle_irq) from [<c0549624>] (__irq_svc+0x44/0x5c) [ 6.096282] Exception stack(0xde0efce0 to 0xde0efd28) [ 6.101623] fce0: 00000000 01003200 fa0b4000 00000000 de0efd84 de1de000 00000000 00008002 [ 6.110260] fd00: de4c1b86 de4c1b80 de0efde6 00000000 00000000 de0efd28 c044eb28 c0438000 [ 6.118865] fd20: 20000113 ffffffff [ 6.122558] [<c0549624>] (__irq_svc) from [<c0438000>] (mmc_wait_for_cmd+0x58/0x88) [ 6.130645] [<c0438000>] (mmc_wait_for_cmd) from [<c0441b38>] (mmc_io_rw_direct_host+0xa4/0x13c) [ 6.139923] [<c0441b38>] (mmc_io_rw_direct_host) from [<c04428fc>] (sdio_read_cis+0x168/0x298) [ 6.148986] [<c04428fc>] (sdio_read_cis) from [<c0440de0>] (mmc_sdio_init_card+0x3e0/0xaa4) [ 6.157806] [<c0440de0>] (mmc_sdio_init_card) from [<c04417ac>] (mmc_attach_sdio+0x78/0x360) [ 6.166717] [<c04417ac>] (mmc_attach_sdio) from [<c043a318>] (mmc_rescan+0x260/0x2e8) [ 6.174957] [<c043a318>] (mmc_rescan) from [<c00591c4>] (process_one_work+0x1ac/0x4c4) [ 6.183319] [<c00591c4>] (process_one_work) from [<c005a05c>] (worker_thread+0x114/0x3b4) [ 6.191955] [<c005a05c>] (worker_thread) from [<c005fc50>] (kthread+0xcc/0xe8) [ 6.199584] [<c005fc50>] (kthread) from [<c000e548>] (ret_from_fork+0x14/0x2c) [ 6.207183] ---[ end trace 1bfd1d39aea85ada ]--- ~$off # PYBOOT: Exception: kernel: ERROR: failed to boot: <class 'pexpect.TIMEOUT'> # PYBOOT: Time: 77.75 seconds. # PYBOOT: Result: FAIL multi_v7_defconfig ------------------ armada-370-mirabox: FAIL: last 80 lines of boot log: ---------------------------------------------------- Connected to mirabox console [channel connected] (~$quit to exit) (user:khilman) is already connected ~$hardreset Command(mirabox console)> hardreset (user:khilman) Reboot mirabox Reboot: mirabox ; ip9258 1 1 : off, sleep, on ~$off # PYBOOT: Exception: ERROR: Could not break into autoboot. # PYBOOT: Time: 31.68 seconds. # PYBOOT: Result: FAIL armada-xp-openblocks-ax3-4: FAIL: last 80 lines of boot log: ------------------------------------------------------------ [ 0.435243] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 0.456505] d0012000.serial: ttyS0 at MMIO 0xd0012000 (irq = 20, base_baud = 15625000) is a 16550A [ 1.189601] console [ttyS0] enabled [ 1.213608] d0012100.serial: ttyS1 at MMIO 0xd0012100 (irq = 21, base_baud = 15625000) is a 16550A [ 1.222817] Serial: IMX driver [ 1.226087] STMicroelectronics ASC driver initialized [ 1.231503] serial: Freescale lpuart driver [ 1.235791] [drm] Initialized drm 1.1.0 20060810 [ 1.243386] loop: module loaded [ 1.247024] sata_mv d00a0000.sata: version 1.28 [ 1.251629] sata_mv d00a0000.sata: unable to find phy [ 1.256723] Unable to handle kernel NULL pointer dereference at virtual address 00000054 [ 1.264833] pgd = c0004000 [ 1.267556] [00000054] *pgd=00000000 [ 1.271154] Internal error: Oops: 5 [#1] SMP ARM [ 1.275781] Modules linked in: [ 1.278856] CPU: 1 PID: 1 Comm: swapper/0 Not tainted 3.14.0-rc1-00013-g878a876 #1 [ 1.286444] task: ed04c000 ti: ed058000 task.ti: ed058000 [ 1.291864] PC is at __clk_put+0x1c/0x8c [ 1.295797] LR is at clk_prepare_lock+0x10/0xfc [ 1.300340] pc : [<c0493298>] lr : [<c0490944>] psr: 60000113 [ 1.300340] sp : ed059e10 ip : 00000000 fp : 0000001f [ 1.311845] r10: ed3a3190 r9 : ed0d3c00 r8 : 00000004 [ 1.317083] r7 : ffffffed r6 : 00000000 r5 : ed276010 r4 : 00000000 [ 1.323627] r3 : ed04c000 r2 : ed04c000 r1 : ed059e00 r0 : 00000054 [ 1.330169] Flags: nZCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment kernel [ 1.337496] Control: 10c5387d Table: 0000406a DAC: 00000015 [ 1.343255] Process swapper/0 (pid: 1, stack limit = 0xed058240) [ 1.349277] Stack: (0xed059e10 to 0xed05a000) [ 1.353646] 9e00: 00000001 c036166c c085a730 000000df [ 1.361846] 9e20: ed0ce1b0 00000002 c0608df4 00000000 74726f70 ed0c0030 00000001 ed3a2ab0 [ 1.370045] 9e40: 000000df ed0d3c10 c091caf8 00000000 c091caf8 c085a730 000000df ed058030 [ 1.378245] 9e60: 00000000 c0304b48 c0304b30 ed0d3c10 c0985c8c c03033a4 00000000 ed0d3c10 [ 1.386444] 9e80: c091caf8 ed0d3c44 00000000 c0303590 00000000 c091caf8 c0303504 c03019bc [ 1.394644] 9ea0: ed03b85c ed09a934 c091caf8 ed3a3100 c0916eb8 c0302b6c c0776abc c094b6c0 [ 1.402844] 9ec0: c091caf8 c091caf8 00000006 c094b6c0 c094b6c0 c0303b94 00000000 c089f18c [ 1.411044] 9ee0: 00000006 c085a760 c089f18c c0008ba8 ed003c00 c072b1b4 ed0c7380 c05a4da0 [ 1.419243] 9f00: 00000000 c094b6c0 c082150c c012d9d8 00000000 c08e63d8 60000113 00000001 [ 1.427443] 9f20: ee7ffe1b c05b45b8 000000df c005d444 c07ebee0 00000006 ee7ffe26 00000006 [ 1.435642] 9f40: c08e63c8 c089f18c 00000006 c094b6c0 c094b6c0 c082150c 000000df c08818c4 [ 1.443842] 9f60: c08818b8 c0821c48 00000006 00000006 c082150c 88854891 15413389 b850a414 [ 1.452041] 9f80: 15a48542 00000000 c05939e4 00000000 00000000 00000000 00000000 00000000 [ 1.460241] 9fa0: 00000000 c05939ec 00000000 c000e578 00000000 00000000 00000000 00000000 [ 1.468440] 9fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 [ 1.476639] 9fe0: 00000000 00000000 00000000 00000000 00000013 00000000 c9451725 254584d0 [ 1.484848] [<c0493298>] (__clk_put) from [<c036166c>] (mv_platform_probe+0x2c0/0x43c) [ 1.492791] [<c036166c>] (mv_platform_probe) from [<c0304b48>] (platform_drv_probe+0x18/0x48) [ 1.501342] [<c0304b48>] (platform_drv_probe) from [<c03033a4>] (driver_probe_device+0x124/0x240) [ 1.510239] [<c03033a4>] (driver_probe_device) from [<c0303590>] (__driver_attach+0x8c/0x90) [ 1.518701] [<c0303590>] (__driver_attach) from [<c03019bc>] (bus_for_each_dev+0x60/0x94) [ 1.526901] [<c03019bc>] (bus_for_each_dev) from [<c0302b6c>] (bus_add_driver+0x148/0x1f0) [ 1.535188] [<c0302b6c>] (bus_add_driver) from [<c0303b94>] (driver_register+0x78/0xf8) [ 1.543216] [<c0303b94>] (driver_register) from [<c085a760>] (mv_init+0x30/0x50) [ 1.550635] [<c085a760>] (mv_init) from [<c0008ba8>] (do_one_initcall+0xf8/0x144) [ 1.558143] [<c0008ba8>] (do_one_initcall) from [<c0821c48>] (kernel_init_freeable+0x13c/0x1dc) [ 1.566867] [<c0821c48>] (kernel_init_freeable) from [<c05939ec>] (kernel_init+0x8/0x120) [ 1.575070] [<c05939ec>] (kernel_init) from [<c000e578>] (ret_from_fork+0x14/0x3c) [ 1.582661] Code: 8a000012 ebfff5a8 e2840054 f57ff05b (e1903f9f) [ 1.588802] ---[ end trace ec86948de818c17b ]--- [ 1.593442] Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b [ 1.593442] [ 1.602603] CPU0: stopping [ 1.605320] CPU: 0 PID: 0 Comm: swapper/0 Tainted: G D 3.14.0-rc1-00013-g878a876 #1 [ 1.613877] [<c001584c>] (unwind_backtrace) from [<c00113fc>] (show_stack+0x10/0x14) [ 1.621646] [<c00113fc>] (show_stack) from [<c0599588>] (dump_stack+0x84/0x94) [ 1.628889] [<c0599588>] (dump_stack) from [<c0014120>] (handle_IPI+0x148/0x174) [ 1.636307] [<c0014120>] (handle_IPI) from [<c00086fc>] (armada_370_xp_handle_irq+0xa8/0x114) [ 1.644855] [<c00086fc>] (armada_370_xp_handle_irq) from [<c0011f80>] (__irq_svc+0x40/0x50) [ 1.653225] Exception stack(0xc08a3f68 to 0xc08a3fb0) [ 1.658290] 3f60: ffffffed 2d736000 c08ab4e4 00000000 c08aa4cc c08a2000 [ 1.666490] 3f80: c08aa450 c094b54b c05a4128 c08a2000 c094b54b c08a2000 00000000 c08a3fb0 [ 1.674687] 3fa0: c000f118 c008114c 60000113 ffffffff [ 1.679757] [<c0011f80>] (__irq_svc) from [<c008114c>] (cpu_startup_entry+0x100/0x144) [ 1.687699] [<c008114c>] (cpu_startup_entry) from [<c0821b00>] (start_kernel+0x358/0x364) [ 1.695898] [<c0821b00>] (start_kernel) from [<00008074>] (0x8074) ~$off # PYBOOT: Exception: kernel: Unable to handle kernel NULL pointer dereference at virtual address 00000054 # PYBOOT: Time: 22.81 seconds. # PYBOOT: Result: FAIL omap3-tobi,3730storm: FAIL: last 80 lines of boot log: ------------------------------------------------------ Die ID #3dea00029ff80000016830c40802e016 Net: smc911x-0 Warning: smc911x-0 using MAC address from net device Hit any key to stop autoboot: 5 0 Overo # Overo # version version U-Boot 2013.04-00003-g84ebf5d (Jun 21 2013 - 15:36:05) arm-linux-gnueabi-gcc (Ubuntu/Linaro 4.7.2-1ubuntu1) 4.7.2 GNU ld (GNU Binutils for Ubuntu) 2.22.90.20120919 Overo # setenv bootargs console=ttyO2,115200n8 earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 setenv bootargs console=ttyO2,115200n8 earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 Overo # setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none' setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none' Overo # if test -n ${initenv}; then run initenv; fi if test -n ${initenv}; then run initenv; fi Overo # if test -n ${preboot}; then run preboot; fi if test -n ${preboot}; then run preboot; fi Overo # setenv autoload no; setenv autoboot no setenv autoload no; setenv autoboot no Overo # dhcp dhcp smc911x: detected LAN9221 controller smc911x: phy initialized smc911x: MAC 00:15:c9:28:f0:11 BOOTP broadcast 1 BOOTP broadcast 2 DHCP client bound to address 192.168.1.156 Overo # setenv serverip 192.168.1.2 setenv serverip 192.168.1.2 Overo # if test -n ${netargs}; then run netargs; fi if test -n ${netargs}; then run netargs; fi Overo # tftp ${loadaddr} 192.168.1.2:tmp/3730storm-X_FkY9/zImage tftp ${loadaddr} 192.168.1.2:tmp/3730storm-X_FkY9/zImage smc911x: detected LAN9221 controller smc911x: phy initialized smc911x: MAC 00:15:c9:28:f0:11 Using smc911x-0 device TFTP from server 192.168.1.2; our IP address is 192.168.1.156 Filename 'tmp/3730storm-X_FkY9/zImage'. Load address: 0x82000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ############################################# 2.4 MiB/s done Bytes transferred = 4469304 (443238 hex) Overo # tftp 0x81f00000 192.168.1.2:tmp/3730storm-X_FkY9/omap3-tobi.dtb tftp 0x81f00000 192.168.1.2:tmp/3730storm-X_FkY9/omap3-tobi.dtb smc911x: detected LAN9221 controller smc911x: phy initialized smc911x: MAC 00:15:c9:28:f0:11 Using smc911x-0 device TFTP from server 192.168.1.2; our IP address is 192.168.1.156 Filename 'tmp/3730storm-X_FkY9/omap3-tobi.dtb'. Load address: 0x81f00000 Loading: *#### 2.3 MiB/s done Bytes transferred = 56692 (dd74 hex) Overo # printenv bootargs printenv bootargs bootargs=console=ttyO2,115200n8 earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.156:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none Overo # bootz ${loadaddr} - 0x81f00000 bootz ${loadaddr} - 0x81f00000 ## Flattened Device Tree blob at 81f00000 Booting using the fdt blob at 0x81f00000 Loading Device Tree to 8ffef000, end 8ffffd73 ... OK Starting kernel ... ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 29.07 seconds. # PYBOOT: Result: FAIL u8500_defconfig --------------- ste-snowball: FAIL: last 80 lines of boot log: ---------------------------------------------- Connected to snowball console [channel connected] (~$quit to exit) (user:khilman) is already connected ~$hardreset Command(snowball console)> hardreset (user:khilman) Reboot snowball Reboot: snowball ; ip9258 2 2 : ('off', 6, 'on') , sleep 6, 0 U8500 $ ~$off # PYBOOT: Exception: ERROR: Could not break into autoboot. # PYBOOT: Time: 31.60 seconds. # PYBOOT: Result: FAIL mvebu_defconfig --------------- armada-xp-openblocks-ax3-4: FAIL: last 80 lines of boot log: ------------------------------------------------------------ mv_xor d0060900.xor: Marvell shared XOR driver mv_xor d0060900.xor: Marvell XOR: ( xor cpy ) mv_xor d0060900.xor: Marvell XOR: ( xor cpy ) mv_xor d00f0900.xor: Marvell shared XOR driver mv_xor d00f0900.xor: Marvell XOR: ( xor cpy ) mv_xor d00f0900.xor: Marvell XOR: ( xor cpy ) Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled d0012000.serial: ttyS0 at MMIO 0xd0012000 (irq = 20, base_baud = 15625000) is a 16550A console [ttyS0] enabled d0012100.serial: ttyS1 at MMIO 0xd0012100 (irq = 21, base_baud = 15625000) is a 16550A sata_mv d00a0000.sata: version 1.28 sata_mv d00a0000.sata: error getting phy Unable to handle kernel NULL pointer dereference at virtual address 00000054 pgd = c0004000 [00000054] *pgd=00000000 Internal error: Oops: 5 [#1] SMP ARM Modules linked in: CPU: 0 PID: 1 Comm: swapper/0 Not tainted 3.14.0-rc1-00013-g878a876 #1 task: ee82ab80 ti: ee83c000 task.ti: ee83c000 PC is at __clk_put+0x1c/0x8c LR is at clk_prepare_lock+0x10/0xfc pc : [<c02c9088>] lr : [<c02c6734>] psr: 60000113 sp : ee83de08 ip : 00000000 fp : ee807900 r10: eeb92290 r9 : ee908200 r8 : ffffffda r7 : ee908210 r6 : 00000000 r5 : eebfded0 r4 : 00000000 r3 : ee82ab80 r2 : ee82ab80 r1 : ee83ddf8 r0 : 00000054 Flags: nZCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment kernel Control: 10c53c7d Table: 0000406a DAC: 00000015 Process swapper/0 (pid: 1, stack limit = 0xee83c240) Stack: (0xee83de08 to 0xee83e000) de00: 00000001 c01ff59c ee90de10 c00ff6f8 c04e183c 0000001f de20: ee90de10 00000002 c03c2d80 00000000 74726f70 ee900030 00000001 eea00ca8 de40: 00000086 ee908210 c0519090 00000000 c0519090 c04e183c 00000086 ee83c030 de60: 00000000 c01c9898 c01c9880 c0551d48 ee908210 c01c8020 00000007 ee908210 de80: c0519090 ee908244 00000000 c01c82a0 00000000 c0519090 c01c8208 c01c6718 dea0: ee85a7dc ee85e1b4 c0519090 eeb92300 c05180c0 c01c78c8 c046b570 c052edc0 dec0: c0519090 c0519090 00000006 c052edc0 c052edc0 c01c88e4 00000000 c04f6464 dee0: 00000006 c04e186c c04f6464 c00088a8 0000006d 00000042 ef7fce00 c03bc820 df00: 00000000 ef7fce08 c0453554 00000000 0000004c c04ac204 00000063 ee83df30 df20: ef7fce1b c03bc820 00000086 c0035df8 c04abd44 00000006 ef7fce26 00000006 df40: c0507b70 c04f6464 00000006 c052edc0 c052edc0 c04cd50c 00000086 c04efb14 df60: c04efb08 c04cdc40 00000006 00000006 c04cd50c d456fc5d 0fbbed6f 47affddf df80: fbff7bce 00000000 c03a04f4 00000000 00000000 00000000 00000000 00000000 dfa0: 00000000 c03a04fc 00000000 c000e278 00000000 00000000 00000000 00000000 dfc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 dfe0: 00000000 00000000 00000000 00000000 00000013 00000000 9757fff7 dd7dfd3f [<c02c9088>] (__clk_put) from [<c01ff59c>] (mv_platform_probe+0x2ac/0x414) [<c01ff59c>] (mv_platform_probe) from [<c01c9898>] (platform_drv_probe+0x18/0x48) [<c01c9898>] (platform_drv_probe) from [<c01c8020>] (really_probe+0x80/0x214) [<c01c8020>] (really_probe) from [<c01c82a0>] (__driver_attach+0x98/0x9c) [<c01c82a0>] (__driver_attach) from [<c01c6718>] (bus_for_each_dev+0x60/0x94) [<c01c6718>] (bus_for_each_dev) from [<c01c78c8>] (bus_add_driver+0x148/0x1f0) [<c01c78c8>] (bus_add_driver) from [<c01c88e4>] (driver_register+0x78/0xf8) [<c01c88e4>] (driver_register) from [<c04e186c>] (mv_init+0x30/0x50) [<c04e186c>] (mv_init) from [<c00088a8>] (do_one_initcall+0xf8/0x144) [<c00088a8>] (do_one_initcall) from [<c04cdc40>] (kernel_init_freeable+0x138/0x1d8) [<c04cdc40>] (kernel_init_freeable) from [<c03a04fc>] (kernel_init+0x8/0x120) [<c03a04fc>] (kernel_init) from [<c000e278>] (ret_from_fork+0x14/0x3c) Code: 8a000012 ebfff5a8 e2840054 f57ff05b (e1903f9f) ---[ end trace 5e9f972395cc5f3b ]--- Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b CPU1: stopping CPU: 1 PID: 0 Comm: swapper/1 Tainted: G D 3.14.0-rc1-00013-g878a876 #1 [<c0014824>] (unwind_backtrace) from [<c00110d4>] (show_stack+0x10/0x14) [<c00110d4>] (show_stack) from [<c03a4d24>] (dump_stack+0x80/0x90) [<c03a4d24>] (dump_stack) from [<c0013be4>] (handle_IPI+0x148/0x170) [<c0013be4>] (handle_IPI) from [<c00085ac>] (armada_370_xp_handle_irq+0xac/0xb0) [<c00085ac>] (armada_370_xp_handle_irq) from [<c0011c00>] (__irq_svc+0x40/0x50) Exception stack(0xee877fa0 to 0xee877fe8) 7fa0: eefe65b8 00000000 00000948 00000000 ee876000 c05024ac c03ab9cc ee876000 7fc0: c052ec76 00000001 c052ec76 ee876000 00000000 ee877fe8 c000edec c005572c 7fe0: 60000113 ffffffff [<c0011c00>] (__irq_svc) from [<c005572c>] (cpu_startup_entry+0xf4/0x134) [<c005572c>] (cpu_startup_entry) from [<00008644>] (0x8644) ~$off # PYBOOT: Exception: kernel: Unable to handle kernel NULL pointer dereference at virtual address 00000054 # PYBOOT: Time: 20.15 seconds. # PYBOOT: Result: FAIL armada-370-mirabox: FAIL: last 80 lines of boot log: ---------------------------------------------------- Connected to mirabox console [channel connected] (~$quit to exit) (user:khilman) is already connected ~$hardreset Command(mirabox console)> hardreset (user:khilman) Reboot mirabox Reboot: mirabox ; ip9258 1 1 : off, sleep, on ~$off # PYBOOT: Exception: ERROR: Could not break into autoboot. # PYBOOT: Time: 31.57 seconds. # PYBOOT: Result: FAIL

10 years, 8 months

mainline build: 12 warnings 0 failures (mainline/v3.14-rc1-13-g878a876)

by Olof's autobuilder

Here are the build results from automated periodic testing. The tree being built was mainline, found at: http://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git (master branch) Topmost commit: 878a876 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs Build logs (stderr only) can be found at the following link (experimental): http://arm-soc.lixom.net/buildlogs/mainline/v3.14-rc1-13-g878a876/ Runtime: 42m 48s Passed: 123 Failed: 0 Warnings: 12 Section mismatches: 0 ------------------------------------------------------------------------------- Failed defconfigs: ------------------------------------------------------------------------------- Errors: Warnings: 1 drivers/dma/mv_xor.c:500:3: warning: format '%x' expects argument of type 'unsigned int', but argument 4 has type 'dma_addr_t' [-Wformat=] 1 drivers/dma/mv_xor.c:553:13: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] 1 drivers/dma/mv_xor.c:555:4: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast] 1 drivers/dma/mv_xor.c:584:2: warning: format '%x' expects argument of type 'unsigned int', but argument 5 has type 'dma_addr_t' [-Wformat=] 1 drivers/dma/mv_xor.c:584:2: warning: format '%x' expects argument of type 'unsigned int', but argument 6 has type 'dma_addr_t' [-Wformat=] 1 drivers/dma/mv_xor.c:628:2: warning: format '%u' expects argument of type 'unsigned int', but argument 7 has type 'dma_addr_t' [-Wformat=] 1 drivers/usb/host/xhci-plat.c:203:12: warning: 'xhci_plat_suspend' defined but not used [-Wunused-function] 1 drivers/usb/host/xhci-plat.c:211:12: warning: 'xhci_plat_resume' defined but not used [-Wunused-function] 2 buildall.arm.multi_lpae_defconfig.log.passed:warning: (ARM_HIGHBANK_CPUFREQ) selects GENERIC_CPUFREQ_CPU0 which has unmet direct dependencies (ARCH_HAS_CPUFREQ && CPU_FREQ && HAVE_CLK && REGULATOR && OF && THERMAL && CPU_THERMAL) 2 buildall.arm.multi_v7_defconfig.log.passed:warning: (ARM_HIGHBANK_CPUFREQ) selects GENERIC_CPUFREQ_CPU0 which has unmet direct dependencies (ARCH_HAS_CPUFREQ && CPU_FREQ && HAVE_CLK && REGULATOR && OF && THERMAL && CPU_THERMAL) Section mismatches:

10 years, 8 months

queue boot: 35 pass, 2 fail (v3.13.1-140-g8f0b89c)

by Kevin's boot bot

Automated DT boot report for various ARM defconfigs. Tree/Branch: queue Git describe: v3.13.1-140-g8f0b89c Failed boot tests (console logs at the end) =========================================== armada-370-mirabox: FAIL: multi_v7_defconfig armada-xp-openblocks-ax3-4: FAIL: multi_v7_defconfig Full Report =========== omap2plus_defconfig ------------------- am335x-boneblack PASS: 0 min 26.7 sec omap3-beagle-xm PASS: 0 min 59.6 sec am335x-bone PASS: 0 min 27.2 sec omap4-panda PASS: 1 min 6.0 sec omap4-panda-es PASS: 1 min 13.3 sec omap3-tobi,3730storm PASS: 0 min 24.6 sec omap3-tobi,3530overo PASS: 0 min 22.6 sec multi_lpae_defconfig -------------------- sun7i-a20-cubieboard2 PASS: 0 min 13.8 sec tegra_defconfig --------------- tegra30-beaver PASS: 0 min 17.0 sec imx_v6_v7_defconfig ------------------- imx6dl-wandboard,wand-dual PASS: 0 min 18.7 sec imx6dl-wandboard,wand-solo PASS: 0 min 18.6 sec imx6q-wandboard PASS: 0 min 17.0 sec sunxi_defconfig --------------- sun7i-a20-cubieboard2 PASS: 0 min 11.8 sec sun4i-a10-cubieboard PASS: 0 min 12.6 sec bcm_defconfig ------------- bcm28155-ap PASS: 0 min 53.7 sec exynos_defconfig ---------------- exynos5250-arndale PASS: 0 min 36.2 sec multi_v7_defconfig ------------------ ste-snowball PASS: 0 min 32.1 sec tegra30-beaver PASS: 0 min 16.8 sec am335x-boneblack PASS: 0 min 22.2 sec omap3-beagle-xm PASS: 0 min 56.5 sec sun7i-a20-cubieboard2 PASS: 0 min 13.5 sec armada-370-mirabox FAIL: 0 min 28.7 sec omap4-panda PASS: 0 min 58.7 sec omap4-panda-es PASS: 0 min 59.2 sec armada-xp-openblocks-ax3-4 FAIL: 0 min 30.3 sec sun4i-a10-cubieboard PASS: 0 min 13.6 sec bcm28155-ap PASS: 0 min 59.0 sec imx6dl-wandboard,wand-solo PASS: 0 min 18.3 sec am335x-bone PASS: 0 min 24.1 sec imx6q-wandboard PASS: 0 min 17.6 sec omap3-tobi,3730storm PASS: 0 min 23.4 sec imx6dl-wandboard,wand-dual PASS: 0 min 17.2 sec omap3-tobi,3530overo PASS: 0 min 20.7 sec u8500_defconfig --------------- ste-snowball PASS: 0 min 31.3 sec sama5_defconfig --------------- sama5d35ek PASS: 0 min 17.3 sec mvebu_defconfig --------------- armada-xp-openblocks-ax3-4 PASS: 0 min 21.9 sec armada-370-mirabox PASS: 0 min 20.0 sec Console logs for failures ========================= multi_v7_defconfig ------------------ armada-370-mirabox: FAIL: last 80 lines of boot log: ---------------------------------------------------- phy16= 72 MMC: MRVL_MMC: 0 Net: egiga0 [PRIME], egiga1 Hit any key to stop autoboot: 3 0 Marvell>> Marvell>> version version U-Boot 2009.08 (Sep 16 2012 - 22:50:06)Marvell version: 1.1.2 NQ Marvell>> setenv bootargs console=ttyS0,115200 debug earlyprintk setenv bootargs console=ttyS0,115200 debug earlyprintk Marvell>> setenv initrd_high 0xffffffff setenv initrd_high 0xffffffff Marvell>> if test -n ${initenv}; then run initenv; fi if test -n ${initenv}; then run initenv; fi Marvell>> if test -n ${preboot}; then run preboot; fi if test -n ${preboot}; then run preboot; fi Marvell>> setenv autoload no; setenv autoboot no setenv autoload no; setenv autoboot no Marvell>> dhcp dhcp phyaddr= 0 BOOTP broadcast 1 DHCP client bound to address 192.168.1.183 Marvell>>setenv serverip 192.168.1.2 setenv serverip 192.168.1.2 Marvell>>if test -n ${netargs}; then run netargs; fi if test -n ${netargs}; then run netargs; fi Marvell>> tftp 0x02000000 192.168.1.2:tmp/mirabox-88IqvW/tmpQjMZ18-uImage tftp 0x02000000 192.168.1.2:tmp/mirabox-88IqvW/tmpQjMZ18-uImage Using egiga0 device TFTP from server 192.168.1.2; our IP address is 192.168.1.183 Filename 'tmp/mirabox-88IqvW/tmpQjMZ18-uImage'. Load address: 0x2000000 Loading: *################################################################# ################################################################# ################################################################# ###################################################### done Bytes transferred = 3654962 (37c532 hex) Marvell>> tftp 0x03000000 192.168.1.2:buildroot.cpio.gz.uboot tftp 0x03000000 192.168.1.2:buildroot.cpio.gz.uboot Using egiga0 device TFTP from server 192.168.1.2; our IP address is 192.168.1.183 Filename 'buildroot.cpio.gz.uboot'. Load address: 0x3000000 Loading: *############################################ done Bytes transferred = 639808 (9c340 hex) Marvell>> printenv bootargs printenv bootargs bootargs=console=ttyS0,115200 debug earlyprintk Marvell>> bootm 0x02000000 0x03000000 bootm 0x02000000 0x03000000 ## Booting kernel from Legacy Image at 02000000 ... Image Name: Linux Created: 2014-02-04 21:06:00 UTC Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 3654898 Bytes = 3.5 MB Load Address: 00008000 Entry Point: 00008000 Verifying Checksum ... OK ## Loading init Ramdisk from Legacy Image at 03000000 ... Image Name: Created: 2013-09-07 5:02:12 UTC Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 639744 Bytes = 624.8 kB Load Address: 81000000 Entry Point: 81000000 Verifying Checksum ... OK Loading Kernel Image ... OK OK Starting kernel ... ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 28.68 seconds. # PYBOOT: Result: FAIL armada-xp-openblocks-ax3-4: FAIL: last 80 lines of boot log: ------------------------------------------------------------ Net: egiga0, egiga1, egiga2, egiga3 Hit any key to stop autoboot: 1 0 openblocks> openblocks> version version U-Boot 2011.12 (Aug 26 2013 - 13:08:34) Plat'Home version: 2.0.7 (Marvell version: 2012_Q4.0p17) arm-marvell-linux-gnueabi-gcc (Linaro GCC branch-4.6.4. Marvell GCC 201301-1645.aee66e26) 4.6.4 20120731 (prerelease) GNU ld (Linaro GCC branch-4.6.4. Marvell GCC 201301-1645.aee66e26) 2.22.0.20120801 openblocks>setenv bootargs console=ttyS0,115200 debug earlyprintk setenv bootargs console=ttyS0,115200 debug earlyprintk openblocks>if test -n ${initenv}; then run initenv; fi if test -n ${initenv}; then run initenv; fi openblocks> if test -n ${preboot}; then run preboot; fi if test -n ${preboot}; then run preboot; fi openblocks> setenv autoload no; setenv autoboot no setenv autoload no; setenv autoboot no openblocks>dhcp dhcp BOOTP broadcast 1 BOOTP broadcast 2 DHCP client bound to address 192.168.1.158 openblocks> setenv serverip 192.168.1.2 setenv serverip 192.168.1.2 openblocks> if test -n ${netargs}; then run netargs; fi if test -n ${netargs}; then run netargs; fi openblocks>tftp 0x02000000 192.168.1.2:tmp/obsax3-1t3zzC/tmp1hrZ8t-uImage tftp 0x02000000 192.168.1.2:tmp/obsax3-1t3zzC/tmp1hrZ8t-uImage Using egiga0 device TFTP from server 192.168.1.2; our IP address is 192.168.1.158 Filename 'tmp/obsax3-1t3zzC/tmp1hrZ8t-uImage'. Load address: 0x2000000 Loading: *################################################################# ################################################################# ################################################################# ####################################################### done Bytes transferred = 3659921 (37d891 hex) openblocks> tftp 0x03000000 192.168.1.2:buildroot.cpio.gz.uboot tftp 0x03000000 192.168.1.2:buildroot.cpio.gz.uboot Using egiga0 device TFTP from server 192.168.1.2; our IP address is 192.168.1.158 Filename 'buildroot.cpio.gz.uboot'. Load address: 0x3000000 Loading: *############################################ done Bytes transferred = 639808 (9c340 hex) openblocks> printenv bootargs printenv bootargs bootargs=console=ttyS0,115200 debug earlyprintk openblocks> bootm 0x02000000 0x03000000 bootm 0x02000000 0x03000000 ## Booting kernel from Legacy Image at 02000000 ... Image Name: Linux Created: 2014-02-04 21:08:54 UTC Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 3659857 Bytes = 3.5 MiB Load Address: 00008000 Entry Point: 00008000 Verifying Checksum ... OK ## Loading init Ramdisk from Legacy Image at 03000000 ... Image Name: Created: 2013-09-07 5:02:12 UTC Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 639744 Bytes = 624.8 KiB Load Address: 81000000 Entry Point: 81000000 Verifying Checksum ... OK Loading Kernel Image ... OK OK Starting kernel ... ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 30.32 seconds. # PYBOOT: Result: FAIL

10 years, 8 months

queue build: 11 warnings 0 failures (queue/v3.13.1-140-g8f0b89c)

by Olof's autobuilder

10 years, 8 months

queue boot: 11 pass, 4 fail (v3.10.28-75-gdfac3e2)

by Kevin's boot bot

Automated DT boot report for various ARM defconfigs. Tree/Branch: queue Git describe: v3.10.28-75-gdfac3e2 Failed boot tests (console logs at the end) =========================================== armada-370-mirabox: FAIL: mvebu_defconfig armada-xp-openblocks-ax3-4: FAIL: multi_v7_defconfig armada-370-mirabox: FAIL: multi_v7_defconfig sun4i-a10-cubieboard: FAIL: multi_v7_defconfig Full Report =========== omap2plus_defconfig ------------------- omap3-beagle-xm PASS: 0 min 59.3 sec am335x-bone PASS: 0 min 26.2 sec omap4-panda PASS: 1 min 11.9 sec omap4-panda-es PASS: 1 min 4.9 sec omap3-tobi,3730storm PASS: 0 min 36.4 sec omap3-tobi,3530overo PASS: 0 min 34.0 sec tegra_defconfig --------------- tegra30-beaver PASS: 0 min 17.8 sec imx_v6_v7_defconfig ------------------- imx6dl-wandboard,wand-dual PASS: 0 min 17.2 sec imx6dl-wandboard,wand-solo PASS: 0 min 17.0 sec mvebu_defconfig --------------- armada-xp-openblocks-ax3-4 PASS: 0 min 21.4 sec armada-370-mirabox FAIL: 0 min 31.6 sec multi_v7_defconfig ------------------ armada-xp-openblocks-ax3-4 FAIL: 0 min 20.1 sec armada-370-mirabox FAIL: 0 min 31.5 sec sun4i-a10-cubieboard FAIL: 1 min 13.7 sec sama5_defconfig --------------- sama5d35ek PASS: 0 min 16.4 sec Console logs for failures ========================= mvebu_defconfig --------------- armada-370-mirabox: FAIL: last 80 lines of boot log: ---------------------------------------------------- Connected to mirabox console [channel connected] (~$quit to exit) (user:khilman) is already connected ~$hardreset Command(mirabox console)> hardreset (user:khilman) Reboot mirabox Reboot: mirabox ; ip9258 1 1 : off, sleep, on ~$off # PYBOOT: Exception: ERROR: Could not break into autoboot. # PYBOOT: Time: 31.59 seconds. # PYBOOT: Result: FAIL multi_v7_defconfig ------------------ armada-xp-openblocks-ax3-4: FAIL: last 80 lines of boot log: ------------------------------------------------------------ pps_core: LinuxPPS API ver. 1 registered pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti(a)linux.it> PTP clock support registered EDAC MC: Ver: 3.0.0 Switching to clocksource armada_370_xp_clocksource bounce pool size: 64 pages Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251) io scheduler noop registered io scheduler deadline registered io scheduler cfq registered (default) armada-xp-pinctrl d0018000.pinctrl: registered pinctrl driver ipmi message handler version 39.2 IPMI System Interface driver. ipmi_si: Adding default-specified kcs state machine ipmi_si: Trying default-specified kcs state machine at i/o address 0xca2, slave address 0x0, irq 0 ipmi_si: Could not set up I/O space Trying to free nonexistent resource <0000000000000ca2-0000000000000ca2> Trying to free nonexistent resource <0000000000000ca3-0000000000000ca3> ipmi_si: Adding default-specified smic state machine ipmi_si: Trying default-specified smic state machine at i/o address 0xca9, slave address 0x0, irq 0 ipmi_si: Could not set up I/O space Trying to free nonexistent resource <0000000000000ca9-0000000000000ca9> Trying to free nonexistent resource <0000000000000caa-0000000000000caa> Trying to free nonexistent resource <0000000000000cab-0000000000000cab> ipmi_si: Adding default-specified bt state machine ipmi_si: Trying default-specified bt state machine at i/o address 0xe4, slave address 0x0, irq 0 ipmi_si: Could not set up I/O space Trying to free nonexistent resource <00000000000000e4-00000000000000e4> Trying to free nonexistent resource <00000000000000e5-00000000000000e5> Trying to free nonexistent resource <00000000000000e6-00000000000000e6> ipmi_si: Unable to find any System Interface(s) Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled d0012000.serial: ttyS0 at MMIO 0xd0012000 (irq = 17) is a 16550A console [ttyS0] enabled d0012100.serial: ttyS1 at MMIO 0xd0012100 (irq = 18) is a 16550A sata_mv d00a0000.sata: slots 32 ports 2 scsi0 : sata_mv scsi1 : sata_mv ata1: SATA max UDMA/133 irq 24 ata2: SATA max UDMA/133 irq 24 usbcore: registered new interface driver usb-storage mousedev: PS/2 mouse device common for all mice sdhci: Secure Digital Host Controller Interface driver sdhci: Copyright(c) Pierre Ossman sdhci-pltfm: SDHCI platform and OF driver helper usbcore: registered new interface driver usbhid usbhid: USB HID core driver VFP support v0.3: implementor 56 architecture 2 part 20 variant 9 rev 6 Registering SWP/SWPB emulation handler /home/build/work/batch/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) ata1: SATA link down (SStatus 0 SControl F300) ata2: SATA link down (SStatus 0 SControl F300) List of all partitions: No filesystem could mount root, tried: Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(0,0) CPU: 1 PID: 1 Comm: swapper/0 Not tainted 3.10.28-00075-gdfac3e2 #1 [<c0013bec>] (unwind_backtrace+0x0/0xf4) from [<c00114b0>] (show_stack+0x10/0x14) [<c00114b0>] (show_stack+0x10/0x14) from [<c0276060>] (panic+0xa0/0x1e8) [<c0276060>] (panic+0xa0/0x1e8) from [<c0329110>] (mount_block_root+0x294/0x298) [<c0329110>] (mount_block_root+0x294/0x298) from [<c03292c4>] (prepare_namespace+0x14c/0x184) [<c03292c4>] (prepare_namespace+0x14c/0x184) from [<c0328d60>] (kernel_init_freeable+0x1c8/0x1d8) [<c0328d60>] (kernel_init_freeable+0x1c8/0x1d8) from [<c0271dc8>] (kernel_init+0x8/0x158) [<c0271dc8>] (kernel_init+0x8/0x158) from [<c000df18>] (ret_from_fork+0x14/0x3c) CPU0: stopping CPU: 0 PID: 0 Comm: swapper/0 Not tainted 3.10.28-00075-gdfac3e2 #1 [<c0013bec>] (unwind_backtrace+0x0/0xf4) from [<c00114b0>] (show_stack+0x10/0x14) [<c00114b0>] (show_stack+0x10/0x14) from [<c001236c>] (handle_IPI+0x108/0x130) [<c001236c>] (handle_IPI+0x108/0x130) from [<c000851c>] (armada_370_xp_handle_irq+0x90/0xa8) [<c000851c>] (armada_370_xp_handle_irq+0x90/0xa8) from [<c000dac0>] (__irq_svc+0x40/0x50) Exception stack(0xc0359f70 to 0xc0359fb8) 9f60: c1d5c6d8 00000000 000000c2 000000c2 9f80: c03604a8 c0358000 c036045c c0383c6c c027dec0 c0358000 c0383c6c c0358000 9fa0: 0000001f c0359fb8 c000f070 c004f990 60000113 ffffffff [<c000dac0>] (__irq_svc+0x40/0x50) from [<c004f990>] (cpu_startup_entry+0xfc/0x140) [<c004f990>] (cpu_startup_entry+0xfc/0x140) from [<c0328a3c>] (start_kernel+0x2c4/0x2d0) [<c0328a3c>] (start_kernel+0x2c4/0x2d0) from [<00008074>] (0x8074) ~$off # PYBOOT: Exception: kernel: ERROR: failed to boot: Kernel panic # PYBOOT: Time: 20.15 seconds. # PYBOOT: Result: FAIL armada-370-mirabox: FAIL: last 80 lines of boot log: ---------------------------------------------------- Connected to mirabox console [channel connected] (~$quit to exit) (user:khilman) is already connected ~$hardreset Command(mirabox console)> hardreset (user:khilman) Reboot mirabox Reboot: mirabox ; ip9258 1 1 : off, sleep, on ~$off # PYBOOT: Exception: ERROR: Could not break into autoboot. # PYBOOT: Time: 31.51 seconds. # PYBOOT: Result: FAIL sun4i-a10-cubieboard: FAIL: last 80 lines of boot log: ------------------------------------------------------ pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) .text : 0xc0008000 - 0xc0327aac (3199 kB) .init : 0xc0328000 - 0xc0356780 ( 186 kB) .data : 0xc0358000 - 0xc0383d20 ( 176 kB) .bss : 0xc0383d20 - 0xc03b68a8 ( 203 kB) SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 Hierarchical RCU implementation. RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=1. NR_IRQS:16 nr_irqs:16 16 sched_clock: 32 bits at 100 Hz, resolution 10000000ns, wraps every 4294967286ms Console: colour dummy device 80x30 Calibrating delay loop... 669.28 BogoMIPS (lpj=3346432) pid_max: default: 32768 minimum: 301 Mount-cache hash table entries: 512 CPU: Testing write buffer coherency: ok CPU0: thread -1, cpu 0, socket -1, mpidr 0 Setting up static identity map for 0xc027ba00 - 0xc027ba58 unable to find compatible sirf rstc node in dtb Brought up 1 CPUs SMP: Total of 1 processors activated (669.28 BogoMIPS). CPU: All CPU(s) started in SVC mode. pinctrl core: initialized pinctrl subsystem NET: Registered protocol family 16 DMA: preallocated 256 KiB pool for atomic coherent allocations unable to find compatible sirf pwrc node in dtb Serial: AMBA PL011 UART driver bio: create slab <bio-0> at 0 SCSI subsystem initialized libata version 3.00 loaded. usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb pps_core: LinuxPPS API ver. 1 registered pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti(a)linux.it> PTP clock support registered EDAC MC: Ver: 3.0.0 bounce pool size: 64 pages Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251) io scheduler noop registered io scheduler deadline registered io scheduler cfq registered (default) sunxi-pinctrl 1c20800.pinctrl: initialized sunXi PIO driver ipmi message handler version 39.2 IPMI System Interface driver. ipmi_si: Adding default-specified kcs state machine ipmi_si: Trying default-specified kcs state machine at i/o address 0xca2, slave address 0x0, irq 0 ipmi_si: Could not set up I/O space Trying to free nonexistent resource <0000000000000ca2-0000000000000ca2> Trying to free nonexistent resource <0000000000000ca3-0000000000000ca3> ipmi_si: Adding default-specified smic state machine ipmi_si: Trying default-specified smic state machine at i/o address 0xca9, slave address 0x0, irq 0 ipmi_si: Could not set up I/O space Trying to free nonexistent resource <0000000000000ca9-0000000000000ca9> Trying to free nonexistent resource <0000000000000caa-0000000000000caa> Trying to free nonexistent resource <0000000000000cab-0000000000000cab> ipmi_si: Adding default-specified bt state machine ipmi_si: Trying default-specified bt state machine at i/o address 0xe4, slave address 0x0, irq 0 ipmi_si: Could not set up I/O space Trying to free nonexistent resource <00000000000000e4-00000000000000e4> Trying to free nonexistent resource <00000000000000e5-00000000000000e5> Trying to free nonexistent resource <00000000000000e6-00000000000000e6> ipmi_si: Unable to find any System Interface(s) Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled 1c28000.serial: ttyS0 at MMIO 0x1c28000 (irq = 17) is a U6_16550A console [ttyS0] enabled usbcore: registered new interface driver usb-storage mousedev: PS/2 mouse device common for all mice sdhci: Secure Digital Host Controller Interface driver sdhci: Copyright(c) Pierre Ossman sdhci-pltfm: SDHCI platform and OF driver helper usbcore: registered new interface driver usbhid usbhid: USB HID core driver VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 3 Registering SWP/SWPB emulation handler /home/build/work/batch/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) Waiting for root device /dev/mmcblk0p2... ~$off # PYBOOT: Exception: kernel: ERROR: failed to boot: <class 'pexpect.TIMEOUT'> # PYBOOT: Time: 73.69 seconds. # PYBOOT: Result: FAIL

10 years, 8 months

queue build: 23 warnings 1 failures (queue/v3.10.28-75-gdfac3e2)

by Olof's autobuilder

Here are the build results from automated periodic testing. The tree being built was queue, found at: Local queue of patches applied from http://git.kernel.org/cgit/linux/kernel/git/stable/stable-queue.git Topmost commit: dfac3e2 hp_accel: Add a new PnP ID HPQ6007 for new HP laptops Build logs (stderr only) can be found at the following link (experimental): http://arm-soc.lixom.net/buildlogs/queue/v3.10.28-75-gdfac3e2/ Runtime: 32m 7s Passed: 120 Failed: 1 Warnings: 23 Section mismatches: 0 ------------------------------------------------------------------------------- Failed defconfigs: exynos_defconfig ------------------------------------------------------------------------------- Errors: exynos_defconfig: drivers/usb/dwc3/dwc3-exynos.c:49:7: error: 'struct nop_usb_xceiv_platform_data' has no member named 'gpio_reset' Warnings: 1 arch/arm/mach-pxa/em-x270.c:480:18: warning: ignoring return value of 'regulator_enable', declared with attribute warn_unused_result [-Wunused-result] 1 arch/arm/mach-pxa/em-x270.c:484:18: warning: ignoring return value of 'regulator_enable', declared with attribute warn_unused_result [-Wunused-result] 1 arch/arm/mach-pxa/em-x270.c:603:19: warning: ignoring return value of 'regulator_enable', declared with attribute warn_unused_result [-Wunused-result] 1 drivers/gpio/gpio-omap.c:1529:13: warning: 'omap_gpio_init_context' defined but not used [-Wunused-function] 1 drivers/spi/spi-pl022.c:2226:9: warning: format '%x' expects argument of type 'unsigned int', but argument 2 has type 'resource_size_t' [-Wformat=] 1 drivers/video/backlight/max8925_bl.c:124:41: warning: statement with no effect [-Wunused-value] 1 include/linux/clocksource.h:345:20: warning: comparison of distinct pointer types lacks a cast [enabled by default] 4 arch/arm/mm/init.c:603:2: warning: passing argument 1 of 'free_reserved_area' makes integer from pointer without a cast [enabled by default] 4 arch/arm/mm/init.c:603:2: warning: passing argument 2 of 'free_reserved_area' makes integer from pointer without a cast [enabled by default] 4 arch/arm/mm/init.c:731:2: warning: passing argument 1 of 'free_reserved_area' makes integer from pointer without a cast [enabled by default] 4 arch/arm/mm/init.c:731:2: warning: passing argument 2 of 'free_reserved_area' makes integer from pointer without a cast [enabled by default] Section mismatches:

10 years, 8 months

queue boot: 30 pass, 4 fail (v3.12.9-101-g264770c)

by Kevin's boot bot

Automated DT boot report for various ARM defconfigs. Tree/Branch: queue Git describe: v3.12.9-101-g264770c Failed boot tests (console logs at the end) =========================================== armada-370-mirabox: FAIL: multi_v7_defconfig armada-xp-openblocks-ax3-4: FAIL: multi_v7_defconfig armada-xp-openblocks-ax3-4: FAIL: mvebu_defconfig armada-370-mirabox: FAIL: mvebu_defconfig Full Report =========== omap2plus_defconfig ------------------- am335x-boneblack PASS: 0 min 24.8 sec omap3-beagle-xm PASS: 1 min 2.2 sec am335x-bone PASS: 0 min 27.0 sec omap4-panda PASS: 1 min 7.7 sec omap4-panda-es PASS: 1 min 10.2 sec omap3-tobi,3730storm PASS: 0 min 24.6 sec omap3-tobi,3530overo PASS: 0 min 22.0 sec tegra_defconfig --------------- tegra30-beaver PASS: 0 min 16.8 sec imx_v6_v7_defconfig ------------------- imx6dl-wandboard,wand-dual PASS: 0 min 17.5 sec imx6dl-wandboard,wand-solo PASS: 0 min 17.3 sec imx6q-wandboard PASS: 0 min 16.4 sec bcm_defconfig ------------- bcm28155-ap PASS: 0 min 58.9 sec multi_lpae_defconfig -------------------- sun7i-a20-cubieboard2 PASS: 0 min 13.7 sec multi_v7_defconfig ------------------ ste-snowball PASS: 0 min 26.0 sec tegra30-beaver PASS: 0 min 17.1 sec am335x-boneblack PASS: 0 min 31.9 sec omap3-beagle-xm PASS: 0 min 53.6 sec sun7i-a20-cubieboard2 PASS: 0 min 13.9 sec armada-370-mirabox FAIL: 0 min 31.6 sec omap4-panda PASS: 1 min 0.8 sec omap4-panda-es PASS: 1 min 9.4 sec armada-xp-openblocks-ax3-4 FAIL: 0 min 31.6 sec sun4i-a10-cubieboard PASS: 0 min 13.2 sec bcm28155-ap PASS: 1 min 9.7 sec imx6dl-wandboard,wand-solo PASS: 0 min 17.2 sec am335x-bone PASS: 0 min 33.8 sec imx6q-wandboard PASS: 0 min 16.0 sec omap3-tobi,3730storm PASS: 0 min 20.1 sec imx6dl-wandboard,wand-dual PASS: 0 min 16.9 sec omap3-tobi,3530overo PASS: 0 min 20.4 sec u8500_defconfig --------------- ste-snowball PASS: 0 min 34.0 sec sama5_defconfig --------------- sama5d35ek PASS: 0 min 18.4 sec mvebu_defconfig --------------- armada-xp-openblocks-ax3-4 FAIL: 0 min 31.6 sec armada-370-mirabox FAIL: 0 min 31.6 sec Console logs for failures ========================= multi_v7_defconfig ------------------ armada-370-mirabox: FAIL: last 80 lines of boot log: ---------------------------------------------------- Connected to mirabox console [channel connected] (~$quit to exit) (user:khilman) is already connected ~$hardreset Command(mirabox console)> hardreset (user:khilman) Reboot mirabox Reboot: mirabox ; ip9258 1 1 : off, sleep, on ~$off # PYBOOT: Exception: ERROR: Could not break into autoboot. # PYBOOT: Time: 31.60 seconds. # PYBOOT: Result: FAIL armada-xp-openblocks-ax3-4: FAIL: last 80 lines of boot log: ------------------------------------------------------------ Connected to obsax3 console [channel connected] (~$quit to exit) (user:khilman) is already connected ~$hardreset Command(obsax3 console)> hardreset (user:khilman) Reboot obsax3 Reboot: obsax3 ; ip9258 1 4 : off, sleep, on ~$off # PYBOOT: Exception: ERROR: Could not break into autoboot. # PYBOOT: Time: 31.64 seconds. # PYBOOT: Result: FAIL mvebu_defconfig --------------- armada-xp-openblocks-ax3-4: FAIL: last 80 lines of boot log: ------------------------------------------------------------ Connected to obsax3 console [channel connected] (~$quit to exit) (user:khilman) is already connected ~$hardreset Command(obsax3 console)> hardreset (user:khilman) Reboot obsax3 Reboot: obsax3 ; ip9258 1 4 : off, sleep, on ~$off # PYBOOT: Exception: ERROR: Could not break into autoboot. # PYBOOT: Time: 31.56 seconds. # PYBOOT: Result: FAIL armada-370-mirabox: FAIL: last 80 lines of boot log: ---------------------------------------------------- Connected to mirabox console [channel connected] (~$quit to exit) (user:khilman) is already connected ~$hardreset Command(mirabox console)> hardreset (user:khilman) Reboot mirabox Reboot: mirabox ; ip9258 1 1 : off, sleep, on ~$off # PYBOOT: Exception: ERROR: Could not break into autoboot. # PYBOOT: Time: 31.56 seconds. # PYBOOT: Result: FAIL

10 years, 8 months

queue build: 17 warnings 1 failures (queue/v3.12.9-101-g264770c)

by Olof's autobuilder

Here are the build results from automated periodic testing. The tree being built was queue, found at: Local queue of patches applied from http://git.kernel.org/cgit/linux/kernel/git/stable/stable-queue.git Topmost commit: 264770c i2c: piix4: Add support for AMD ML and CZ SMBus changes Build logs (stderr only) can be found at the following link (experimental): http://arm-soc.lixom.net/buildlogs/queue/v3.12.9-101-g264770c/ Runtime: 33m 58s Passed: 116 Failed: 1 Warnings: 17 Section mismatches: 0 ------------------------------------------------------------------------------- Failed defconfigs: exynos_defconfig ------------------------------------------------------------------------------- Errors: exynos_defconfig: drivers/usb/dwc3/dwc3-exynos.c:53:7: error: 'struct usb_phy_gen_xceiv_platform_data' has no member named 'gpio_reset' Warnings: 1 drivers/dma/imx-dma.c:575:3: warning: format '%x' expects argument of type 'unsigned int', but argument 6 has type 'dma_addr_t' [-Wformat=] 1 drivers/dma/imx-dma.c:575:3: warning: format '%x' expects argument of type 'unsigned int', but argument 7 has type 'dma_addr_t' [-Wformat=] 1 drivers/dma/imx-dma.c:589:4: warning: format '%x' expects argument of type 'unsigned int', but argument 9 has type 'dma_addr_t' [-Wformat=] 1 drivers/dma/imx-dma.c:599:4: warning: format '%x' expects argument of type 'unsigned int', but argument 9 has type 'dma_addr_t' [-Wformat=] 1 drivers/dma/imx-dma.c:929:2: warning: format '%x' expects argument of type 'unsigned int', but argument 6 has type 'dma_addr_t' [-Wformat=] 1 drivers/dma/imx-dma.c:929:2: warning: format '%x' expects argument of type 'unsigned int', but argument 7 has type 'dma_addr_t' [-Wformat=] 1 drivers/dma/imx-dma.c:959:2: warning: format '%x' expects argument of type 'unsigned int', but argument 6 has type 'dma_addr_t' [-Wformat=] 1 drivers/dma/imx-dma.c:959:2: warning: format '%x' expects argument of type 'unsigned int', but argument 7 has type 'dma_addr_t' [-Wformat=] 1 drivers/dma/imx-sdma.c:1092:3: warning: format '%x' expects argument of type 'unsigned int', but argument 6 has type 'dma_addr_t' [-Wformat=] 1 drivers/dma/imx-sdma.c:1166:3: warning: format '%x' expects argument of type 'unsigned int', but argument 6 has type 'dma_addr_t' [-Wformat=] 1 drivers/dma/ipu/ipu_idmac.c:1235:2: warning: format '%x' expects argument of type 'unsigned int', but argument 5 has type 'dma_addr_t' [-Wformat=] 1 drivers/dma/ipu/ipu_idmac.c:1235:2: warning: format '%x' expects argument of type 'unsigned int', but argument 6 has type 'dma_addr_t' [-Wformat=] 1 drivers/gpu/host1x/hw/cdma_hw.c:57:3: warning: format '%x' expects argument of type 'unsigned int', but argument 5 has type 'dma_addr_t' [-Wformat=] 1 drivers/gpu/host1x/hw/debug_hw.c:175:10: warning: format '%x' expects argument of type 'unsigned int', but argument 3 has type 'dma_addr_t' [-Wformat=] 1 drivers/tty/serial/imx.c:1542:6: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] 2 drivers/mtd/nand/gpmi-nand/gpmi-nand.c:120:13: warning: 'set_geometry_by_ecc_info' defined but not used [-Wunused-function] Section mismatches:

10 years, 8 months

← Newer
1
...
34
35
36
37
38
39
40
41
Older →

Jump to page:

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

Kernel-build-reports February 2014