Kernel-build-reports March 2014

kernel-build-reports@lists.linaro.org

15 participants
336 discussions

mainline boot: 33 passed 0 failed (mainline/v3.14-rc8-22-g1fac1fa)

by Olof's autobooter

Failed boards: Successful boards: apc vt8500_v6_v7_defconfig : passed 1:18.71 arndale exynos_defconfig : passed 1:08.54 bbb omap2plus_defconfig : passed 1:36.16 bbb multi_v7_defconfig : passed 1:26.81 beaver tegra_defconfig : passed 0:52.66 beaver multi_v7_defconfig : passed 0:48.11 capri bcm_defconfig : passed 0:43.84 capri multi_v7_defconfig : passed 0:44.93 cubie sunxi_defconfig : passed 0:53.77 cubie multi_v7_defconfig : passed 1:00.72 cubie2 sunxi_defconfig : passed 1:00.79 cubie2 multi_v7_defconfig : passed 1:05.50 cubie2 multi_lpae_defconfig : passed 0:58.70 cubox dove_defconfig : passed 1:07.55 dalmore tegra_defconfig : passed 1:17.62 dalmore multi_v7_defconfig : passed 1:19.74 dalmore multi_lpae_defconfig : passed 1:16.71 hummingboard imx_v6_v7_defconfig : passed 1:22.59 hummingboard multi_v7_defconfig : passed 1:10.02 omap5uevm multi_v7_defconfig : warnings 1:39.76 omap5uevm multi_lpae_defconfig : warnings 1:36.67 panda omap2plus_defconfig : passed 1:19.35 panda multi_v7_defconfig : passed 1:16.07 sama5 sama5_defconfig : passed 1:54.99 seaboard tegra_defconfig : passed 1:06.34 seaboard multi_v7_defconfig : passed 1:09.12 snow exynos_defconfig : passed 1:24.40 snowball u8500_defconfig : passed 2:30.71 snowball multi_v7_defconfig : passed 2:51.87 trimslice tegra_defconfig : passed 0:56.05 trimslice multi_v7_defconfig : passed 1:10.88 wandboard imx_v6_v7_defconfig : passed 0:56.40 wandboard multi_v7_defconfig : passed 1:05.21 Offline boards: omap5uevm omap2plus_defconfig : OFFLINE 2:17.54 Board legend is available at http://arm-soc.lixom.net/boards.html

10 years, 8 months

mainline build: 7 warnings 0 failures (mainline/v3.14-rc8-22-g1fac1fa)

by Olof's autobuilder

Here are the build results from automated periodic testing. The tree being built was mainline, found at: http://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git (master branch) Topmost commit: 1fac1fa Merge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linux Build logs (stderr only) can be found at the following link (experimental): http://arm-soc.lixom.net/buildlogs/mainline/v3.14-rc8-22-g1fac1fa/ Runtime: 24m 43s Passed: 123 Failed: 0 Warnings: 7 Section mismatches: 0 ------------------------------------------------------------------------------- Failed defconfigs: ------------------------------------------------------------------------------- Errors: Warnings: 1 drivers/staging/imx-drm/imx-drm-core.c:87:25: warning: unused variable 'imxdrm' [-Wunused-variable] 1 drivers/usb/host/xhci-plat.c:203:12: warning: 'xhci_plat_suspend' defined but not used [-Wunused-function] 1 drivers/usb/host/xhci-plat.c:211:12: warning: 'xhci_plat_resume' defined but not used [-Wunused-function] 2 buildall.arm.multi_lpae_defconfig.log.passed:warning: (ARM_HIGHBANK_CPUFREQ) selects GENERIC_CPUFREQ_CPU0 which has unmet direct dependencies (ARCH_HAS_CPUFREQ && CPU_FREQ && HAVE_CLK && REGULATOR && OF && THERMAL && CPU_THERMAL) 2 buildall.arm.multi_v7_defconfig.log.passed:warning: (ARM_HIGHBANK_CPUFREQ) selects GENERIC_CPUFREQ_CPU0 which has unmet direct dependencies (ARCH_HAS_CPUFREQ && CPU_FREQ && HAVE_CLK && REGULATOR && OF && THERMAL && CPU_THERMAL) Section mismatches:

10 years, 8 months

next boot: 37 pass, 8 fail (next-20140328)

by Kevin's boot bot

Automated DT boot report for various ARM defconfigs. Tree/Branch: next Git describe: next-20140328 Failed boot tests (console logs at the end) =========================================== imx6dl-wandboard,wand-dual: FAIL: imx_v6_v7_defconfig imx6dl-wandboard,wand-solo: FAIL: imx_v6_v7_defconfig imx6q-wandboard: FAIL: imx_v6_v7_defconfig ste-snowball: FAIL: multi_v7_defconfig sun4i-a10-cubieboard: FAIL: multi_v7_defconfig imx6dl-wandboard,wand-solo: FAIL: multi_v7_defconfig imx6q-wandboard: OFFLINE: multi_v7_defconfig imx6dl-wandboard,wand-dual: FAIL: multi_v7_defconfig Full Report =========== omap2plus_defconfig ------------------- legacy,3730xm 0 min 51.6 sec: PASS am335x-boneblack 0 min 25.9 sec: PASS omap3-beagle-xm 0 min 58.9 sec: PASS legacy,3530beagle 0 min 41.1 sec: PASS (Warnings: 1) omap4-panda 1 min 7.0 sec: PASS omap3-overo-tobi 0 min 23.1 sec: PASS (Warnings: 1) am335x-bone 0 min 27.6 sec: PASS omap3-overo-storm-tobi 0 min 22.4 sec: PASS omap5-uevm 1 min 2.8 sec: PASS (Warnings: 1) omap4-panda-es 1 min 5.7 sec: PASS legacy,3730storm 0 min 23.2 sec: PASS legacy,3530overo 0 min 21.7 sec: PASS (Warnings: 1) multi_lpae_defconfig -------------------- omap5-uevm 1 min 36.8 sec: PASS (Warnings: 1) sun7i-a20-cubieboard2 0 min 12.4 sec: PASS tegra_defconfig --------------- tegra30-beaver 0 min 17.2 sec: PASS imx_v6_v7_defconfig ------------------- imx6dl-wandboard,wand-dual 0 min 42.9 sec: FAIL imx6dl-wandboard,wand-solo 0 min 42.9 sec: FAIL imx6q-wandboard 0 min 41.0 sec: FAIL sunxi_defconfig --------------- sun7i-a20-cubieboard2 0 min 22.9 sec: PASS sun4i-a10-cubieboard 0 min 12.8 sec: PASS bcm_defconfig ------------- bcm28155-ap 0 min 23.3 sec: PASS exynos_defconfig ---------------- exynos5250-arndale 0 min 30.7 sec: PASS multi_v7_defconfig ------------------ qcom-apq8074-dragonboard 0 min 17.2 sec: PASS ste-snowball 0 min 53.8 sec: FAIL tegra30-beaver 0 min 20.1 sec: PASS am335x-boneblack 0 min 24.1 sec: PASS omap3-beagle-xm 0 min 50.5 sec: PASS sun7i-a20-cubieboard2 0 min 12.2 sec: PASS armada-370-mirabox 0 min 22.3 sec: PASS omap4-panda 0 min 57.6 sec: PASS armada-xp-openblocks-ax3-4 0 min 25.2 sec: PASS sun4i-a10-cubieboard 0 min 44.4 sec: FAIL bcm28155-ap 0 min 27.1 sec: PASS omap3-overo-tobi 0 min 22.2 sec: PASS (Warnings: 1) imx6dl-wandboard,wand-solo 0 min 42.3 sec: FAIL am335x-bone 0 min 26.7 sec: PASS omap3-overo-storm-tobi 0 min 23.8 sec: PASS omap5-uevm 1 min 39.9 sec: PASS (Warnings: 1) imx6q-wandboard 0 min 31.4 sec: OFFLINE omap4-panda-es 0 min 52.7 sec: PASS imx6dl-wandboard,wand-dual 0 min 42.5 sec: FAIL u8500_defconfig --------------- ste-snowball 0 min 33.2 sec: PASS sama5_defconfig --------------- sama5d35ek 0 min 17.2 sec: PASS davinci_all_defconfig --------------------- legacy,dm365evm 0 min 17.5 sec: PASS da850-evm 0 min 15.4 sec: PASS Console logs for failures ========================= imx_v6_v7_defconfig ------------------- imx6dl-wandboard,wand-dual: FAIL: last 80 lines of boot log: ------------------------------------------------------------ version U-Boot 2013.04-00012-g0b44183 (May 15 2013 - 16:00:22) arm-none-linux-gnueabi-gcc (Sourcery G++ Lite 2010.09-50) 4.5.1 GNU ld (Sourcery G++ Lite 2010.09-50) 2.20.51.20100809 => setenv bootargs console=ttymxc0,115200 rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 setenv bootargs console=ttymxc0,115200 rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 => setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none' setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none' => if test -n ${initenv}; then run initenv; fi if test -n ${initenv}; then run initenv; fi => if test -n ${preboot}; then run preboot; fi if test -n ${preboot}; then run preboot; fi => setenv autoload no; setenv autoboot no setenv autoload no; setenv autoboot no => dhcp dhcp FEC Waiting for PHY auto negotiation to complete.. done BOOTP broadcast 1 DHCP client bound to address 192.168.1.156 => setenv serverip 192.168.1.2 setenv serverip 192.168.1.2 => if test -n ${netargs}; then run netargs; fi if test -n ${netargs}; then run netargs; fi =>tftp 0x10800000 192.168.1.2:tmp/wand-dual-MZpYC5/zImage tftp 0x10800000 192.168.1.2:tmp/wand-dual-MZpYC5/zImage Using FEC device TFTP from server 192.168.1.2; our IP address is 192.168.1.156 Filename 'tmp/wand-dual-MZpYC5/zImage'. Load address: 0x10800000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ############################### 1.5 MiB/s done Bytes transferred = 5223152 (4fb2f0 hex) => tftp 0x11100000 192.168.1.2:buildroot.cpio.gz.uboot tftp 0x11100000 192.168.1.2:buildroot.cpio.gz.uboot Using FEC device TFTP from server 192.168.1.2; our IP address is 192.168.1.156 Filename 'buildroot.cpio.gz.uboot'. Load address: 0x11100000 Loading: *############################################ 1.5 MiB/s done Bytes transferred = 642602 (9ce2a hex) =>tftp 0x11000000 192.168.1.2:tmp/wand-dual-MZpYC5/imx6dl-wandboard.dtb tftp 0x11000000 192.168.1.2:tmp/wand-dual-MZpYC5/imx6dl-wandboard.dtb Using FEC device TFTP from server 192.168.1.2; our IP address is 192.168.1.156 Filename 'tmp/wand-dual-MZpYC5/imx6dl-wandboard.dtb'. Load address: 0x11000000 Loading: *## 1.4 MiB/s done Bytes transferred = 26637 (680d hex) => printenv bootargs printenv bootargs bootargs=console=ttymxc0,115200 rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.156:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none => bootz 0x10800000 0x11100000 0x11000000 bootz 0x10800000 0x11100000 0x11000000 ## Loading init Ramdisk from Legacy Image at 11100000 ... Image Name: Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 642538 Bytes = 627.5 KiB Load Address: 00000000 Entry Point: 00000000 ## Flattened Device Tree blob at 11000000 Booting using the fdt blob at 0x11000000 Using Device Tree in place at 11000000, end 1100980c Starting kernel ... ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 42.90 seconds. # PYBOOT: Result: FAIL imx6dl-wandboard,wand-solo: FAIL: last 80 lines of boot log: ------------------------------------------------------------ version U-Boot 2013.04-00012-g0b44183-dirty (May 15 2013 - 16:16:11) arm-none-linux-gnueabi-gcc (Sourcery G++ Lite 2010.09-50) 4.5.1 GNU ld (Sourcery G++ Lite 2010.09-50) 2.20.51.20100809 => setenv bootargs console=ttymxc0,115200 rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 setenv bootargs console=ttymxc0,115200 rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 => setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none' setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none' => if test -n ${initenv}; then run initenv; fi if test -n ${initenv}; then run initenv; fi => if test -n ${preboot}; then run preboot; fi if test -n ${preboot}; then run preboot; fi =>setenv autoload no; setenv autoboot no setenv autoload no; setenv autoboot no => dhcp dhcp FEC Waiting for PHY auto negotiation to complete.. done BOOTP broadcast 1 DHCP client bound to address 192.168.1.164 => setenv serverip 192.168.1.2 setenv serverip 192.168.1.2 => if test -n ${netargs}; then run netargs; fi if test -n ${netargs}; then run netargs; fi => tftp 0x10800000 192.168.1.2:tmp/wand-solo-MvnG05/zImage tftp 0x10800000 192.168.1.2:tmp/wand-solo-MvnG05/zImage Using FEC device TFTP from server 192.168.1.2; our IP address is 192.168.1.164 Filename 'tmp/wand-solo-MvnG05/zImage'. Load address: 0x10800000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ############################### 1.5 MiB/s done Bytes transferred = 5223152 (4fb2f0 hex) => tftp 0x11100000 192.168.1.2:buildroot.cpio.gz.uboot tftp 0x11100000 192.168.1.2:buildroot.cpio.gz.uboot Using FEC device TFTP from server 192.168.1.2; our IP address is 192.168.1.164 Filename 'buildroot.cpio.gz.uboot'. Load address: 0x11100000 Loading: *############################################ 1.5 MiB/s done Bytes transferred = 642602 (9ce2a hex) => tftp 0x11000000 192.168.1.2:tmp/wand-solo-MvnG05/imx6dl-wandboard.dtb tftp 0x11000000 192.168.1.2:tmp/wand-solo-MvnG05/imx6dl-wandboard.dtb Using FEC device TFTP from server 192.168.1.2; our IP address is 192.168.1.164 Filename 'tmp/wand-solo-MvnG05/imx6dl-wandboard.dtb'. Load address: 0x11000000 Loading: *## 1.4 MiB/s done Bytes transferred = 26637 (680d hex) => printenv bootargs printenv bootargs bootargs=console=ttymxc0,115200 rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.164:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none => bootz 0x10800000 0x11100000 0x11000000 bootz 0x10800000 0x11100000 0x11000000 ## Loading init Ramdisk from Legacy Image at 11100000 ... Image Name: Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 642538 Bytes = 627.5 KiB Load Address: 00000000 Entry Point: 00000000 ## Flattened Device Tree blob at 11000000 Booting using the fdt blob at 0x11000000 Using Device Tree in place at 11000000, end 1100980c Starting kernel ... ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 42.91 seconds. # PYBOOT: Result: FAIL imx6q-wandboard: FAIL: last 80 lines of boot log: ------------------------------------------------- U-Boot 2013.07-00001-gc362749 (Sep 06 2013 - 07:50:29) arm-linux-gnueabi-gcc (Ubuntu/Linaro 4.7.2-1ubuntu1) 4.7.2 GNU ld (GNU Binutils for Ubuntu) 2.22.90.20120919 => setenv bootargs console=ttymxc0,115200 setenv bootargs console=ttymxc0,115200 => setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none' setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none' => if test -n ${initenv}; then run initenv; fi if test -n ${initenv}; then run initenv; fi => if test -n ${preboot}; then run preboot; fi if test -n ${preboot}; then run preboot; fi => setenv autoload no; setenv autoboot no setenv autoload no; setenv autoboot no => dhcp dhcp FEC Waiting for PHY auto negotiation to complete.. done BOOTP broadcast 1 DHCP client bound to address 192.168.1.163 => setenv serverip 192.168.1.2 setenv serverip 192.168.1.2 => if test -n ${netargs}; then run netargs; fi if test -n ${netargs}; then run netargs; fi => tftp 0x10800000 192.168.1.2:tmp/wand-quad-WCHDC7/zImage tftp 0x10800000 192.168.1.2:tmp/wand-quad-WCHDC7/zImage Using FEC device TFTP from server 192.168.1.2; our IP address is 192.168.1.163 Filename 'tmp/wand-quad-WCHDC7/zImage'. Load address: 0x10800000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ############################### 2.7 MiB/s done Bytes transferred = 5223152 (4fb2f0 hex) => tftp 0x11100000 192.168.1.2:buildroot.cpio.gz.uboot tftp 0x11100000 192.168.1.2:buildroot.cpio.gz.uboot Using FEC device TFTP from server 192.168.1.2; our IP address is 192.168.1.163 Filename 'buildroot.cpio.gz.uboot'. Load address: 0x11100000 Loading: *############################################ 2.7 MiB/s done Bytes transferred = 642602 (9ce2a hex) => tftp 0x11000000 192.168.1.2:tmp/wand-quad-WCHDC7/imx6q-wandboard.dtb tftp 0x11000000 192.168.1.2:tmp/wand-quad-WCHDC7/imx6q-wandboard.dtb Using FEC device TFTP from server 192.168.1.2; our IP address is 192.168.1.163 Filename 'tmp/wand-quad-WCHDC7/imx6q-wandboard.dtb'. Load address: 0x11000000 Loading: *### 2.6 MiB/s done Bytes transferred = 29426 (72f2 hex) => printenv bootargs printenv bootargs bootargs=console=ttymxc0,115200 ip=192.168.1.163:192.168.1.2::255.255.255.0::::192.168.1.254:none =>bootz 0x10800000 0x11100000 0x11000000 bootz 0x10800000 0x11100000 0x11000000 Kernel image @ 0x10800000 [ 0x000000 - 0x4fb2f0 ] ## Loading init Ramdisk from Legacy Image at 11100000 ... Image Name: Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 642538 Bytes = 627.5 KiB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK ## Flattened Device Tree blob at 11000000 Booting using the fdt blob at 0x11000000 Using Device Tree in place at 11000000, end 1100a2f1 Starting kernel ... ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 40.99 seconds. # PYBOOT: Result: FAIL multi_v7_defconfig ------------------ ste-snowball: FAIL: last 80 lines of boot log: ---------------------------------------------- (user:khilman) Reboot snowball Reboot: snowball ; ip9258 2 2 : ('off', 6, 'on') , sleep 6, MCDE: startup failed sec_bridge: ISSWAPI_FLUSH_BOOT_CODE: 2 EMMC: 0, MMC: 1 In: serial Out: serial Err: serial Net: smc911x-0 Hit any key to stop autoboot: 1 0 U8500 $ U8500 $ version U8500 $ versionsetenv ethaddr 6e:e6:84:36:8e:9e U-Boot 2009.11 (sept. 19 2011 - 17:03:11) U8500 $ setenv ethaddr 6e:e6:84:36:8e:9esetenv bootargs console=ttyAMA2,115200n8 debug earlyprintk rw root=/dev/mmcblk0p3 rootwait rootfstype=ext4 Can't overwrite "ethaddr" U8500 $ setenv bootargs console=ttyAMA2,115200n8 debug earlyprintk rw root=/dev/mmcblk0p3 rootwait rootfstype=ext4setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none' U8500 $ setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none'if test -n ${initenv}; then run initenv; fi U8500 $ if test -n ${initenv}; then run initenv; fiif test -n ${preboot}; then run preboot; fi U8500 $ if test -n ${preboot}; then run preboot; fisetenv autoload no; setenv autoboot no U8500 $ setenv autoload no; setenv autoboot nodhcp U8500 $ dhcp smc911x: detected LAN9221 controller smc911x: phy initialized smc911x: MAC 6e:e6:84:36:8e:9e BOOTP broadcast 1 BOOTP broadcast 2 DHCP client bound to address 192.168.1.159 U8500 $ setenv serverip 192.168.1.2 setenv serverip 192.168.1.2 U8500 $ if test -n ${netargs}; then run netargs; fi if test -n ${netargs}; then run netargs; fi U8500 $ tftp 0x00800000 192.168.1.2:tmp/snowball-K3eE6u/tmp8PIiB1-uImage tftp 0x00800000 192.168.1.2:tmp/snowball-K3eE6u/tmp8PIiB1-uImage smc911x: detected LAN9221 controller smc911x: phy initialized smc911x: MAC 6e:e6:84:36:8e:9e Using smc911x-0 device TFTP from server 192.168.1.2; our IP address is 192.168.1.159 Filename 'tmp/snowball-K3eE6u/tmp8PIiB1-uImage'. Load address: 0x800000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ########################################################### done Bytes transferred = 4670289 (474351 hex) U8500 $ printenv bootargs printenv bootargs bootargs=console=ttyAMA2,115200n8 debug earlyprintk rw root=/dev/mmcblk0p3 rootwait rootfstype=ext4 ip=192.168.1.159:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none U8500 $ bootm 0x00800000 bootm 0x00800000 ## Booting kernel from Legacy Image at 00800000 ... Image Name: Linux Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 4670225 Bytes = 4.5 MB Load Address: 00008000 Entry Point: 00008000 Loading Kernel Image ... OK OK Starting kernel ... ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 53.78 seconds. # PYBOOT: Result: FAIL sun4i-a10-cubieboard: FAIL: last 80 lines of boot log: ------------------------------------------------------ setenv ethaddr 2e:40:70:f0:12:08 sun4i# setenv bootargs console=ttyS0,115200 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 setenv bootargs console=ttyS0,115200 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 sun4i# setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none' setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none' sun4i# setenv initrd_high 0xffffffff setenv initrd_high 0xffffffff sun4i#if test -n ${initenv}; then run initenv; fi if test -n ${initenv}; then run initenv; fi sun4i# if test -n ${preboot}; then run preboot; fi if test -n ${preboot}; then run preboot; fi sun4i# setenv autoload no; setenv autoboot no setenv autoload no; setenv autoboot no sun4i# dhcp dhcp ENET Speed is 100 Mbps - FULL duplex connection BOOTP broadcast 1 DHCP client bound to address 192.168.1.193 sun4i# setenv serverip 192.168.1.2 setenv serverip 192.168.1.2 sun4i# if test -n ${netargs}; then run netargs; fi if test -n ${netargs}; then run netargs; fi sun4i# tftp 0x40008000 192.168.1.2:tmp/cubie-IEvTOF/zImage tftp 0x40008000 192.168.1.2:tmp/cubie-IEvTOF/zImage Using emac device TFTP from server 192.168.1.2; our IP address is 192.168.1.193 Filename 'tmp/cubie-IEvTOF/zImage'. Load address: 0x40008000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ######################################################## 2.7 MiB/s done Bytes transferred = 4628976 (46a1f0 hex) sun4i# tftp 0x42000000 192.168.1.2:buildroot.cpio.gz.uboot tftp 0x42000000 192.168.1.2:buildroot.cpio.gz.uboot Using emac device TFTP from server 192.168.1.2; our IP address is 192.168.1.193 Filename 'buildroot.cpio.gz.uboot'. Load address: 0x42000000 Loading: *############################################ 2.7 MiB/s done Bytes transferred = 642602 (9ce2a hex) sun4i# tftp 0x41000000 192.168.1.2:tmp/cubie-IEvTOF/sun4i-a10-cubieboard.dtb tftp 0x41000000 192.168.1.2:tmp/cubie-IEvTOF/sun4i-a10-cubieboard.dtb Using emac device TFTP from server 192.168.1.2; our IP address is 192.168.1.193 Filename 'tmp/cubie-IEvTOF/sun4i-a10-cubieboard.dtb'. Load address: 0x41000000 Loading: *## 2.1 MiB/s done Bytes transferred = 15184 (3b50 hex) sun4i# printenv bootargs printenv bootargs bootargs=console=ttyS0,115200 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.193:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none sun4i# bootz 0x40008000 0x42000000 0x41000000 bootz 0x40008000 0x42000000 0x41000000 Kernel image @ 0x40008000 [ 0x000000 - 0x46a1f0 ] ## Loading init Ramdisk from Legacy Image at 42000000 ... Image Name: Created: 2014-02-07 19:37:29 UTC Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 642538 Bytes = 627.5 KiB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK ## Flattened Device Tree blob at 41000000 Booting using the fdt blob at 0x41000000 Loading Device Tree to 40ff9000, end 40fffb4f ... OK Starting kernel ... ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 44.36 seconds. # PYBOOT: Result: FAIL imx6dl-wandboard,wand-solo: FAIL: last 80 lines of boot log: ------------------------------------------------------------ => version version U-Boot 2013.04-00012-g0b44183-dirty (May 15 2013 - 16:16:11) arm-none-linux-gnueabi-gcc (Sourcery G++ Lite 2010.09-50) 4.5.1 GNU ld (Sourcery G++ Lite 2010.09-50) 2.20.51.20100809 => setenv bootargs console=ttymxc0,115200 rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 setenv bootargs console=ttymxc0,115200 rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 => setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none' setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none' => if test -n ${initenv}; then run initenv; fi if test -n ${initenv}; then run initenv; fi => if test -n ${preboot}; then run preboot; fi if test -n ${preboot}; then run preboot; fi => setenv autoload no; setenv autoboot no setenv autoload no; setenv autoboot no => dhcp dhcp FEC Waiting for PHY auto negotiation to complete.. done BOOTP broadcast 1 DHCP client bound to address 192.168.1.164 => setenv serverip 192.168.1.2 setenv serverip 192.168.1.2 => if test -n ${netargs}; then run netargs; fi if test -n ${netargs}; then run netargs; fi => tftp 0x10800000 192.168.1.2:tmp/wand-solo-RjkSDG/zImage tftp 0x10800000 192.168.1.2:tmp/wand-solo-RjkSDG/zImage Using FEC device TFTP from server 192.168.1.2; our IP address is 192.168.1.164 Filename 'tmp/wand-solo-RjkSDG/zImage'. Load address: 0x10800000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ######################################################## 1.5 MiB/s done Bytes transferred = 4628976 (46a1f0 hex) => tftp 0x11100000 192.168.1.2:buildroot.cpio.gz.uboot tftp 0x11100000 192.168.1.2:buildroot.cpio.gz.uboot Using FEC device TFTP from server 192.168.1.2; our IP address is 192.168.1.164 Filename 'buildroot.cpio.gz.uboot'. Load address: 0x11100000 Loading: *############################################ 1.5 MiB/s done Bytes transferred = 642602 (9ce2a hex) => tftp 0x11000000 192.168.1.2:tmp/wand-solo-RjkSDG/imx6dl-wandboard.dtb tftp 0x11000000 192.168.1.2:tmp/wand-solo-RjkSDG/imx6dl-wandboard.dtb Using FEC device TFTP from server 192.168.1.2; our IP address is 192.168.1.164 Filename 'tmp/wand-solo-RjkSDG/imx6dl-wandboard.dtb'. Load address: 0x11000000 Loading: *## 1.3 MiB/s done Bytes transferred = 26637 (680d hex) => printenv bootargs printenv bootargs bootargs=console=ttymxc0,115200 rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.164:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none => bootz 0x10800000 0x11100000 0x11000000 bootz 0x10800000 0x11100000 0x11000000 ## Loading init Ramdisk from Legacy Image at 11100000 ... Image Name: Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 642538 Bytes = 627.5 KiB Load Address: 00000000 Entry Point: 00000000 ## Flattened Device Tree blob at 11000000 Booting using the fdt blob at 0x11000000 Using Device Tree in place at 11000000, end 1100980c Starting kernel ... ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 42.33 seconds. # PYBOOT: Result: FAIL imx6q-wandboard: OFFLINE: last 80 lines of boot log: ---------------------------------------------------- Connected to wand-quad console [channel connected] (~$quit to exit) (user:khilman) is already connected ~$hardreset Command(wand-quad console)> hardreset (user:khilman) Reboot wand-quad Reboot: wand-quad ; phidget 2 3 : off, sleep, on U-Boot 2013.07-00001-gc362749 (Sep 06 2013 - 07:50:29) CPU: Freescale i.MX6Q rev1.2 at 792 MHz Reset cause: POR Board: Wandboard DRAM: 2 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1 *** Warning - bad CRC, using default environment In: serial 0 => ~$off # PYBOOT: Exception: ('ERROR: Could not break into u-boot.', 'OFFLINE') # PYBOOT: Time: 31.37 seconds. # PYBOOT: Result: OFFLINE imx6dl-wandboard,wand-dual: FAIL: last 80 lines of boot log: ------------------------------------------------------------ => version version U-Boot 2013.04-00012-g0b44183 (May 15 2013 - 16:00:22) arm-none-linux-gnueabi-gcc (Sourcery G++ Lite 2010.09-50) 4.5.1 GNU ld (Sourcery G++ Lite 2010.09-50) 2.20.51.20100809 => setenv bootargs console=ttymxc0,115200 rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 setenv bootargs console=ttymxc0,115200 rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 => setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none' setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none' => if test -n ${initenv}; then run initenv; fi if test -n ${initenv}; then run initenv; fi => if test -n ${preboot}; then run preboot; fi if test -n ${preboot}; then run preboot; fi => setenv autoload no; setenv autoboot no setenv autoload no; setenv autoboot no => dhcp dhcp FEC Waiting for PHY auto negotiation to complete.. done BOOTP broadcast 1 DHCP client bound to address 192.168.1.156 => setenv serverip 192.168.1.2 setenv serverip 192.168.1.2 => if test -n ${netargs}; then run netargs; fi if test -n ${netargs}; then run netargs; fi => tftp 0x10800000 192.168.1.2:tmp/wand-dual-EjIPxP/zImage tftp 0x10800000 192.168.1.2:tmp/wand-dual-EjIPxP/zImage Using FEC device TFTP from server 192.168.1.2; our IP address is 192.168.1.156 Filename 'tmp/wand-dual-EjIPxP/zImage'. Load address: 0x10800000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ######################################################## 1.5 MiB/s done Bytes transferred = 4628976 (46a1f0 hex) =>tftp 0x11100000 192.168.1.2:buildroot.cpio.gz.uboot tftp 0x11100000 192.168.1.2:buildroot.cpio.gz.uboot Using FEC device TFTP from server 192.168.1.2; our IP address is 192.168.1.156 Filename 'buildroot.cpio.gz.uboot'. Load address: 0x11100000 Loading: *############################################ 1.5 MiB/s done Bytes transferred = 642602 (9ce2a hex) => tftp 0x11000000 192.168.1.2:tmp/wand-dual-EjIPxP/imx6dl-wandboard.dtb tftp 0x11000000 192.168.1.2:tmp/wand-dual-EjIPxP/imx6dl-wandboard.dtb Using FEC device TFTP from server 192.168.1.2; our IP address is 192.168.1.156 Filename 'tmp/wand-dual-EjIPxP/imx6dl-wandboard.dtb'. Load address: 0x11000000 Loading: *## 1.4 MiB/s done Bytes transferred = 26637 (680d hex) => printenv bootargs printenv bootargs bootargs=console=ttymxc0,115200 rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.156:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none => bootz 0x10800000 0x11100000 0x11000000 bootz 0x10800000 0x11100000 0x11000000 ## Loading init Ramdisk from Legacy Image at 11100000 ... Image Name: Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 642538 Bytes = 627.5 KiB Load Address: 00000000 Entry Point: 00000000 ## Flattened Device Tree blob at 11000000 Booting using the fdt blob at 0x11000000 Using Device Tree in place at 11000000, end 1100980c Starting kernel ... ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 42.52 seconds. # PYBOOT: Result: FAIL

10 years, 8 months

mainline boot: 47 pass, 1 fail (v3.14-rc8-12-g75c5a52)

by Kevin's boot bot

Automated DT boot report for various ARM defconfigs. Tree/Branch: mainline Git describe: v3.14-rc8-12-g75c5a52 Failed boot tests (console logs at the end) =========================================== omap5-uevm: OFFLINE: multi_v7_defconfig Full Report =========== da8xx_omapl_defconfig --------------------- da850-evm 0 min 15.5 sec: PASS (Warnings: 1) legacy,da850evm 0 min 14.4 sec: PASS (Warnings: 1) omap2plus_defconfig ------------------- legacy,3730xm 0 min 52.2 sec: PASS am335x-boneblack 0 min 25.9 sec: PASS omap3-beagle-xm 1 min 0.5 sec: PASS legacy,3530beagle 0 min 31.6 sec: PASS (Warnings: 1) omap4-panda 1 min 7.5 sec: PASS omap3-overo-tobi 0 min 22.8 sec: PASS (Warnings: 1) am335x-bone 0 min 27.5 sec: PASS omap3-overo-storm-tobi 0 min 25.4 sec: PASS omap5-uevm 1 min 5.1 sec: PASS (Warnings: 1) omap4-panda-es 1 min 7.5 sec: PASS legacy,3730storm 0 min 23.9 sec: PASS legacy,3530overo 0 min 21.2 sec: PASS (Warnings: 1) multi_lpae_defconfig -------------------- omap5-uevm 1 min 47.8 sec: PASS (Warnings: 1) sun7i-a20-cubieboard2 0 min 14.5 sec: PASS tegra_defconfig --------------- tegra30-beaver 0 min 17.0 sec: PASS imx_v6_v7_defconfig ------------------- imx6dl-wandboard,wand-dual 0 min 18.5 sec: PASS imx6dl-wandboard,wand-solo 0 min 18.4 sec: PASS imx6q-wandboard 0 min 17.1 sec: PASS msm_defconfig ------------- qcom-apq8074-dragonboard 0 min 14.8 sec: PASS bcm_defconfig ------------- bcm28155-ap 0 min 22.6 sec: PASS sunxi_defconfig --------------- sun7i-a20-cubieboard2 0 min 12.9 sec: PASS sun4i-a10-cubieboard 0 min 17.6 sec: PASS exynos_defconfig ---------------- exynos5250-arndale 0 min 29.7 sec: PASS multi_v7_defconfig ------------------ ste-snowball 1 min 20.3 sec: PASS tegra30-beaver 0 min 24.4 sec: PASS am335x-boneblack 0 min 23.6 sec: PASS omap3-beagle-xm 0 min 48.1 sec: PASS sun7i-a20-cubieboard2 0 min 14.2 sec: PASS armada-370-mirabox 0 min 22.2 sec: PASS omap4-panda 0 min 57.6 sec: PASS armada-xp-openblocks-ax3-4 0 min 24.9 sec: PASS sun4i-a10-cubieboard 0 min 14.9 sec: PASS bcm28155-ap 0 min 26.5 sec: PASS omap3-overo-tobi 0 min 24.6 sec: PASS (Warnings: 1) imx6dl-wandboard,wand-solo 0 min 18.2 sec: PASS am335x-bone 0 min 25.9 sec: PASS omap3-overo-storm-tobi 0 min 24.2 sec: PASS omap5-uevm 0 min 31.4 sec: OFFLINE imx6q-wandboard 0 min 17.3 sec: PASS omap4-panda-es 0 min 53.3 sec: PASS imx6dl-wandboard,wand-dual 0 min 18.4 sec: PASS u8500_defconfig --------------- ste-snowball 0 min 30.2 sec: PASS sama5_defconfig --------------- sama5d35ek 0 min 17.1 sec: PASS davinci_all_defconfig --------------------- legacy,dm365evm 0 min 16.9 sec: PASS mvebu_defconfig --------------- armada-xp-openblocks-ax3-4 0 min 22.0 sec: PASS armada-370-mirabox 0 min 20.1 sec: PASS Console logs for failures ========================= multi_v7_defconfig ------------------ omap5-uevm: OFFLINE: last 80 lines of boot log: ----------------------------------------------- Connected to omap5uevm console [channel connected] (~$quit to exit) (user:khilman) is already connected ~$hardreset Command(omap5uevm console)> hardreset (user:khilman) Reboot omap5uevm Reboot: omap5uevm ; phidget 1 2 : ('off', 4, 'on') , sleep 4, found: 002/008 2 ~$off # PYBOOT: Exception: ('ERROR: Could not break into u-boot.', 'OFFLINE') # PYBOOT: Time: 31.38 seconds. # PYBOOT: Result: OFFLINE

10 years, 8 months

next boot: 23 passed 10 failed (next/next-20140328)

by Olof's autobooter

Failed boards: cubie multi_v7_defconfig : FAILED 1:06.65 cubie2 sunxi_defconfig : FAILED 1:20.73 cubie2 multi_v7_defconfig : FAILED 1:07.96 cubie2 multi_lpae_defconfig : FAILED 1:01.81 hummingboard imx_v6_v7_defconfig : FAILED 1:06.28 hummingboard multi_v7_defconfig : FAILED 1:01.88 panda multi_v7_defconfig : FAILED 3:07.57 snowball multi_v7_defconfig : FAILED 1:11.12 wandboard imx_v6_v7_defconfig : FAILED 1:03.01 wandboard multi_v7_defconfig : FAILED 1:00.63 Successful boards: apc vt8500_v6_v7_defconfig : passed 1:15.69 arndale exynos_defconfig : passed 1:07.20 bbb omap2plus_defconfig : passed 1:37.61 bbb multi_v7_defconfig : passed 1:16.26 beaver tegra_defconfig : passed 0:51.51 beaver multi_v7_defconfig : passed 0:55.47 capri bcm_defconfig : passed 0:45.22 capri multi_v7_defconfig : passed 0:44.60 cubie sunxi_defconfig : passed 0:53.40 dalmore tegra_defconfig : passed 1:20.49 dalmore multi_v7_defconfig : passed 1:17.93 dalmore multi_lpae_defconfig : passed 1:16.82 omap5uevm omap2plus_defconfig : warnings 1:01.47 omap5uevm multi_v7_defconfig : warnings 1:43.33 omap5uevm multi_lpae_defconfig : warnings 1:41.23 panda omap2plus_defconfig : warnings 1:14.35 sama5 sama5_defconfig : passed 1:54.05 seaboard tegra_defconfig : passed 1:04.66 seaboard multi_v7_defconfig : passed 1:05.37 snow exynos_defconfig : passed 1:33.08 snowball u8500_defconfig : passed 1:22.37 trimslice tegra_defconfig : passed 0:59.68 trimslice multi_v7_defconfig : passed 0:58.01 Offline boards: Board legend is available at http://arm-soc.lixom.net/boards.html Last entries of failed logs below: ======================================================================== Board cubie-multi_v7_defconfig failure log: ------------------------------------------------- tftp 0x40008000 next/next-20140328/multi_v7_defconfig/zImage Using emac device TFTP from server 172.16.1.3; our IP address is 172.16.1.145 Filename 'next/next-20140328/multi_v7_defconfig/zImage'. Load address: 0x40008000 Loading: *#################node: cubie status: on ################################################ ################################################################# ################################################################# ################################################################# ######################################################## 2.8 MiB/s done Bytes transferred = 4628976 (46a1f0 hex) sun4i#setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 sun4i#tftp 0x41000000 next/next-20140328/multi_v7_defconfig/dtbs/sun4i-a10-cubieboard.dtb tftp 0x41000000 next/next-20140328/multi_v7_defconfig/dtbs/sun4i-a10-cubieboard.dtb Using emac device TFTP from server 172.16.1.3; our IP address is 172.16.1.145 Filename 'next/next-20140328/multi_v7_defconfig/dtbs/sun4i-a10-cubieboard.dtb'. Load address: 0x41000000 Loading: *## 2.4 MiB/s done Bytes transferred = 15184 (3b50 hex) sun4i#printenv bootargs printenv bootargs bootargs=console=ttyS0,115200n8 root=/dev/nfs rootwait rw nfsroot=172.16.1.7:/work/nfsroot/cubie ip=dhcp sun4i#bootz 0x40008000 - 0x41000000 bootz 0x40008000 - 0x41000000 Kernel image @ 0x40008000 [ 0x000000 - 0x46a1f0 ] ## Flattened Device Tree blob at 41000000 Booting using the fdt blob at 0x41000000 Loading Device Tree to 40ff9000, end 40fffb4f ... OK Starting kernel ... ~$off # PYBOOT: Exception: timeout ======================================================================== Board cubie2-multi_lpae_defconfig failure log: ------------------------------------------------- tftp 0x40008000 next/next-20140328/multi_lpae_defconfig/zImage Using emac device TFTP from server 172.16.1.3; our IP address is 172.16.1.161 Filename 'next/next-20140328/multi_lpae_defconfig/zImage'. Load address: 0x40008000 Loading: *####################node: cubie2 status: on ############################################# ################################################################# ################################################################# ################################################################# ######################################################### 3.9 MiB/s done Bytes transferred = 4652984 (46ffb8 hex) sun7i#setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 sun7i# tftp 0x41000000 next/next-20140328/multi_lpae_defconfig/dtbs/sun7i-a20-cubieboard2.dtb tftp 0x41000000 next/next-20140328/multi_lpae_defconfig/dtbs/sun7i-a20-cubieboard2.dtb Using emac device TFTP from server 172.16.1.3; our IP address is 172.16.1.161 Filename 'next/next-20140328/multi_lpae_defconfig/dtbs/sun7i-a20-cubieboard2.dtb'. Load address: 0x41000000 Loading: *## 3.5 MiB/s done Bytes transferred = 18361 (47b9 hex) sun7i# printenv bootargs printenv bootargs bootargs=console=ttyS0,115200n8 root=/dev/nfs rootwait rw nfsroot=172.16.1.7:/work/nfsroot/cubie2 ip=dhcp sun7i# bootz 0x40008000 - 0x41000000 bootz 0x40008000 - 0x41000000 Kernel image @ 0x40008000 [ 0x000000 - 0x46ffb8 ] ## Flattened Device Tree blob at 41000000 Booting using the fdt blob at 0x41000000 Loading Device Tree to 40ff8000, end 40fff7b8 ... OK Starting kernel ... ~$off # PYBOOT: Exception: timeout ======================================================================== Board cubie2-multi_v7_defconfig failure log: ------------------------------------------------- tftp 0x40008000 next/next-20140328/multi_v7_defconfig/zImage Using emac device TFTP from server 172.16.1.3; our IP address is 172.16.1.161 Filename 'next/next-20140328/multi_v7_defconfig/zImage'. Load address: 0x40008000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ######################################################## 4 MiB/s done Bytes transferred = 4628976 (46a1f0 hex) sun7i# setenv serverip 172.16.1.3 setenv serverip 17node: cubie2 status: on 2.16.1.3 sun7i# tftp 0x41000000 next/next-20140328/multi_v7_defconfig/dtbs/sun7i-a20-cubieboard2.dtb tftp 0x41000000 next/next-20140328/multi_v7_defconfig/dtbs/sun7i-a20-cubieboard2.dtb Using emac device TFTP from server 172.16.1.3; our IP address is 172.16.1.161 Filename 'next/next-20140328/multi_v7_defconfig/dtbs/sun7i-a20-cubieboard2.dtb'. Load address: 0x41000000 Loading: *## 3.5 MiB/s done Bytes transferred = 18361 (47b9 hex) sun7i# printenv bootargs printenv bootargs bootargs=console=ttyS0,115200n8 root=/dev/nfs rootwait rw nfsroot=172.16.1.7:/work/nfsroot/cubie2 ip=dhcp sun7i# bootz 0x40008000 - 0x41000000 bootz 0x40008000 - 0x41000000 Kernel image @ 0x40008000 [ 0x000000 - 0x46a1f0 ] ## Flattened Device Tree blob at 41000000 Booting using the fdt blob at 0x41000000 Loading Device Tree to 40ff8000, end 40fff7b8 ... OK Starting kernel ... ~$off # PYBOOT: Exception: timeout ======================================================================== Board cubie2-sunxi_defconfig failure log: ------------------------------------------------- [ 0.017766] platform ahci-5v.2: Driver reg-fixed-voltage requests probe deferral [ 0.017790] reg-fixed-voltage usb1-vbus.3: could not find pctldev for node /soc@01c00000/pinctrl@01c20800/usb1_vbus_pin@0, deferring probe [ 0.017803] platform usb1-vbus.3: Driver reg-fixed-voltage requests probe deferral [ 0.017823] reg-fixed-voltage usb2-vbus.4: could not find pctldev for node /soc@01c00000/pinctrl@01c20800/usb2_vbus_pin@0, deferring probe [ 0.017835] platform usb2-vbus.4: Driver reg-fixed-voltage requests probe deferral [ 0.018769] Switched to clocksource arch_sys_counter [ 0.025874] NET: Registered protocol family 2 [ 0.026344] TCP established hash table entries: 8192 (order: 3, 32768 bytes) [ 0.026430] TCP bind hash table entries: 8192 (order: 4, 65536 bytes) [ 0.026552] TCP: Hash tables configured (established 8192 bind 8192) [ 0.026635] TCP: reno registered [ 0.026649] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 0.026707] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 0.026914] NET: Registered protocol family 1 [ 0.027315] RPC: Registered named UNIX socket transport module. [ 0.027327] RPC: Registered udp transport module. [ 0.027333] RPC: Registered tcp transport module. [ 0.027338] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.028301] futex hash table entries: 512 (order: 3, 32768 bytes) [ 0.028855] bounce pool size: 64 pages [ 0.036617] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.036634] io scheduler noop registered [ 0.036641] io scheduler deadline registered [ 0.036823] io scheduler cfq registered (default) [ 0.038440] sunxi-pinctrl 1c20800.pinctrl: initialized sunXi PIO driver [ 0.080509] Serial: 8250/16550 driver, 8 ports, IRQ sharing disabled [ 0.082906] console [ttyS0] disabled [ 0.103099] 1c28000.serial: ttyS0 at MMIO 0x1c28000 (irq = 33, base_baud = 1500000) is a U6_16550A [ 0.609390] console [ttyS0] enabled [ 0.614078] mousedev: PS/2 mouse device common for all mice [ 0.619952] i2c /dev entries driver [ 0.624749] sunxi-wdt 1c20c90.watchdog: Watchdog enabled (timeout=16 sec, nowayout=0) [ 0.633742] TCP: cubic registered [ 0.637063] NET: Registered protocol family 17 [ 0.641624] Registering SWP/SWPB emulation handler [ 0.647334] ahci-5v: 5000 mV [ 0.650623] usb1-vbus: 5000 mV [ 0.653982] usb2-vbus: 5000 mV ~$off # PYBOOT: Exception: timeout ======================================================================== Board hummingboard-imx_v6_v7_defconfig failure log: ------------------------------------------------- tftp 0x10800000 next/next-20140328/imx_v6_v7_defconfig/zImage Using FEC device TFTP from server 172.16.1.3; our IP address is 172.16.1.163 Filename 'next/next-20140328/imx_v6_v7_defconfig/zImage'. Load address: 0x10800000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ############################### 1.8 MiB/s done Bytes transferred = 5223152 (4fb2f0 hex) C1 U-Boot > setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 C1 U-Boot > tftp 0x11000000 next/next-20140328/imx_v6_v7_defconfig/dtbs/imx6dl-hummingboard.dtb tftp 0x11000000 next/next-20140328/imx_v6_v7_defconfig/dtbs/imx6dl-hummingboard.dtb Using FEC device TFTP from server 172.16.1.3; our IP address is 172.16.1.163 Filename 'next/next-20140328/imx_v6_v7_defconfig/dtbs/imx6dl-hummingboard.dtb'. Load address: 0x11000000 Loading: *## 1.8 MiB/s done Bytes transferred = 25988 (6584 hex) C1 U-Boot > printenv bootargs printenv bootargs bootargs=console=ttymxc0,115200 root=/dev/mmcblk0p2 rootwait debug earlyprintk C1 U-Boot > bootz 0x10800000 - 0x11000000 bootz 0x10800000 - 0x11000000 Kernel image @ 0x10800000 [ 0x000000 - 0x4fb2f0 ] ## Flattened Device Tree blob at 11000000 Booting using the fdt blob at 0x11000000 Using Device Tree in place at 11000000, end 11009583 Starting kernel ... ~$off # PYBOOT: Exception: timeout ======================================================================== Board hummingboard-multi_v7_defconfig failure log: ------------------------------------------------- C1 U-Boot > tftp 0x10800000 next/next-20140328/multi_v7_defconfig/zImage tftp 0x10800000 next/next-20140328/multi_v7_defconfig/zImage Using FEC device TFTP from server 172.16.1.3; our IP address is 172.16.1.163 Filename 'next/next-20140328/multi_v7_defconfig/zImage'. Load address: 0x10800000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ######################################################## 1.9 MiB/s done Bytes transferred = 4628976 (46a1f0 hex) C1 U-Boot > setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 C1 U-Boot >tftp 0x11000000 next/next-20140328/multi_v7_defconfig/dtbs/imx6dl-hummingboard.dtb tftp 0x11000000 next/next-20140328/multi_v7_defconfig/dtbs/imx6dl-hummingboard.dtb Using FEC device TFTP from server 172.16.1.3; our IP address is 172.16.1.163 Filename 'next/next-20140328/multi_v7_defconfig/dtbs/imx6dl-hummingboard.dtb'. Load address: 0x11000000 Loading: *## 1.8 MiB/s done Bytes transferred = 25988 (6584 hex) C1 U-Boot > printenv bootargs printenv bootargs bootargs=console=ttymxc0,115200 root=/dev/mmcblk0p2 rootwait debug earlyprintk C1 U-Boot > bootz 0x10800000 - 0x11000000 bootz 0x10800000 - 0x11000000 Kernel image @ 0x10800000 [ 0x000000 - 0x46a1f0 ] ## Flattened Device Tree blob at 11000000 Booting using the fdt blob at 0x11000000 Using Device Tree in place at 11000000, end 11009583 Starting kernel ... ~$off # PYBOOT: Exception: timeout ======================================================================== Board panda-multi_v7_defconfig failure log: ------------------------------------------------- [ 2.414703] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null) [ 2.423980] VFS: Mounted root (ext4 filesystem) readonly on device 179:2. [ 2.439666] devtmpfs: mounted [ 2.439666] Freeing unused kernel memory: 548K (c0a64000 - c0aed000) [ 2.522552] smsc95xx v1.0.4 [ 2.598266] smsc95xx 1-1.1:1.0 eth0: register 'smsc95xx' at usb-4a064c00.ehci-1.1, smsc95xx USB 2.0 Ethernet, de:29:92:dc:a6:2d INIT: version 2.88 booting [[36minfo[39;49m] Using makefile-style concurrent boot in runlevel S. [....] Starting the hotplug events dispatcher: udevd[ 3.210205] udevd[175]: starting version 175 [?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0c. [....] Synthesizing the initial hotplug events...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] Waiting for /dev to be fully populated...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] Activating swap...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [ 4.680877] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null) [....] Cleaning up temporary files... /tmp[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0c. [....] Activating lvm and md swap...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] Checking file systems...fsck from util-linux 2.20.1 [?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] Mounting local filesystems...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] Activating swapfile swap...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [ 6.954223] random: nonblocking pool is initialized [....] Cleaning up temporary files...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0c. [....] Setting kernel variables ...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] Configuring network interfaces...Internet Systems Consortium DHCP Client 4.2.2 Copyright 2004-2011 Internet Systems Consortium. All rights reserved. For info, please visit https://www.isc.org/software/dhcp/ [ 7.725067] smsc95xx 1-1.1:1.0 eth0: hardware isn't capable of remote wakeup Listening on LPF/eth0/de:29:92:dc:a6:2d Sending on LPF/eth0/de:29:92:dc:a6:2d Sending on Socket/fallback DHCPREQUEST on eth0 to 255.255.255.255 port 67 [ 9.308197] smsc95xx 1-1.1:1.0 eth0: link up, 100Mbps, full-duplex, lpa 0xC5E1 [ 30.378936] INFO: rcu_sched detected stalls on CPUs/tasks: { 1} (detected by 0, t=2102 jiffies, g=30, c=29, q=9) [ 30.378936] Task dump for CPU 1: [ 30.378936] swapper/1 R running 0 0 1 0x00000000 [ 30.399719] [<c07c7a9c>] (__schedule) from [<c0aebde0>] (0xc0aebde0) ~$off # PYBOOT: Exception: timeout ======================================================================== Board snowball-multi_v7_defconfig failure log: ------------------------------------------------- node: snowball status: on *** Unhandled DHCP Option in OFFER/ACK: 28 *** Unhandled DHCP Option in OFFER/ACK: 28 DHCP client bound to address 172.16.1.129 U8500 $ setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 U8500 $ tftp 0x00100000 tmp/snowball-gA_D1l/tmpneAjOh-uImage tftp 0x00100000 tmp/snowball-gA_D1l/tmpneAjOh-uImage smc911x: detected LAN9221 controller smc911x: phy initialized smc911x: MAC 08:00:08:1e:0f:44 Using smc911x-0 device TFTP from server 172.16.1.3; our IP address is 172.16.1.129 Filename 'tmp/snowball-gA_D1l/tmpneAjOh-uImage'. Load address: 0x100000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ########################################################### done Bytes transferred = 4670289 (474351 hex) U8500 $ printenv bootargs printenv bootargs bootargs=console=ttyAMA2,115200 root=/dev/mmcblk0p4 rootwait rw debug earlyprintk U8500 $ bootm 0x00100000 bootm 0x00100000 ## Booting kernel from Legacy Image at 00100000 ... Image Name: Linux Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 4670225 Bytes = 4.5 MB Load Address: 00008000 Entry Point: 00008000 Loading Kernel Image ... OK OK Starting kernel ... ~$off # PYBOOT: Exception: timeout ======================================================================== Board wandboard-imx_v6_v7_defconfig failure log: ------------------------------------------------- tftp 0x10800000 next/next-20140328/imx_v6_v7_defconfig/zImage Using FEC device TFTP from server 172.16.1.3; our IP address is 172.16.1.162 Filename 'next/next-20140328/imx_v6_v7_defconfig/zImage'. Load address: 0x10800000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ############################### 5.6 MiB/s done Bytes transferred = 5223152 (4fb2f0 hex) =>setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 => tftp 0x11000000 next/next-20140328/imx_v6_v7_defconfig/dtbs/imx6q-wandboard.dtb tftp 0x11000000 next/next-20140328/imx_v6_v7_defconfig/dtbs/imx6q-wandboard.dtb Using FEC device TFTP from server 172.16.1.3; our IP address is 172.16.1.162 Filename 'next/next-20140328/imx_v6_v7_defconfig/dtbs/imx6q-wandboard.dtb'. Load address: 0x11000000 Loading: *### 4.7 MiB/s done Bytes transferred = 29426 (72f2 hex) => printenv bootargs printenv bootargs bootargs=console=ttymxc0,115200 root=/dev/mmcblk0p2 rootwait debug => bootz 0x10800000 - 0x11000000 bootz 0x10800000 - 0x11000000 Kernel image @ 0x10800000 [ 0x000000 - 0x4fb2f0 ] ## Flattened Device Tree blob at 11000000 Booting using the fdt blob at 0x11000000 Using Device Tree in place at 11000000, end 1100a2f1 Starting kernel ... ~$off # PYBOOT: Exception: timeout ======================================================================== Board wandboard-multi_v7_defconfig failure log: ------------------------------------------------- tftp 0x10800000 next/next-20140328/multi_v7_defconfig/zImage Using FEC device TFTP from server 172.16.1.3; our IP address is 172.16.1.162 Filename 'next/next-20140328/multi_v7_defconfig/zImage'. Load address: 0x10800000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ######################################################## 5.6 MiB/s done Bytes transferred = 4628976 (46a1f0 hex) => setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 => tftp 0x11000000 next/next-20140328/multi_v7_defconfig/dtbs/imx6q-wandboard.dtb tftp 0x11000000 next/next-20140328/multi_v7_defconfig/dtbs/imx6q-wandboard.dtb Using FEC device TFTP from server 172.16.1.3; our IP address is 172.16.1.162 Filename 'next/next-20140328/multi_v7_defconfig/dtbs/imx6q-wandboard.dtb'. Load address: 0x11000000 Loading: *### 683.6 KiB/s done Bytes transferred = 29426 (72f2 hex) => printenv bootargs printenv bootargs bootargs=console=ttymxc0,115200 root=/dev/mmcblk0p2 rootwait debug => bootz 0x10800000 - 0x11000000 bootz node: wandboard status: on 0x10800000 - 0x11000000 Kernel image @ 0x10800000 [ 0x000000 - 0x46a1f0 ] ## Flattened Device Tree blob at 11000000 Booting using the fdt blob at 0x11000000 Using Device Tree in place at 11000000, end 1100a2f1 Starting kernel ... ~$off # PYBOOT: Exception: timeout

10 years, 8 months

next build: 20 warnings 5 failures (next/next-20140328)

by Olof's autobuilder

Here are the build results from automated periodic testing. The tree being built was next, found at: http://git.kernel.org/cgit/linux/kernel/git/next/linux-next.git (master branch) Topmost commit: 201544b Add linux-next specific files for 20140328 Build logs (stderr only) can be found at the following link (experimental): http://arm-soc.lixom.net/buildlogs/next/next-20140328/ Runtime: 46m 43s Passed: 119 Failed: 5 Warnings: 20 Section mismatches: 2 ------------------------------------------------------------------------------- Failed defconfigs: kirkwood_defconfig multi_v5_defconfig mvebu_v5_defconfig mvebu_v7_defconfig orion5x_defconfig ------------------------------------------------------------------------------- Errors: kirkwood_defconfig: drivers/i2c/busses/i2c-mv64xxx.c:760:2: error: implicit declaration of function 'devm_reset_control_get' [-Werror=implicit-function-declaration] multi_v5_defconfig: drivers/i2c/busses/i2c-mv64xxx.c:760:2: error: implicit declaration of function 'devm_reset_control_get' [-Werror=implicit-function-declaration] mvebu_v5_defconfig: drivers/i2c/busses/i2c-mv64xxx.c:760:2: error: implicit declaration of function 'devm_reset_control_get' [-Werror=implicit-function-declaration] mvebu_v7_defconfig: drivers/i2c/busses/i2c-mv64xxx.c:760:2: error: implicit declaration of function 'devm_reset_control_get' [-Werror=implicit-function-declaration] orion5x_defconfig: drivers/i2c/busses/i2c-mv64xxx.c:760:2: error: implicit declaration of function 'devm_reset_control_get' [-Werror=implicit-function-declaration] Warnings: 1 drivers/irqchip/irq-clps711x.c:78:1: warning: 'externally_visible' attribute have effect only on public objects [-Wattributes] 1 drivers/mtd/nand/omap2.c:1250:12: warning: 'erased_sector_bitflips' defined but not used [-Wunused-function] 1 drivers/usb/host/xhci-plat.c:206:12: warning: 'xhci_plat_suspend' defined but not used [-Wunused-function] 1 drivers/usb/host/xhci-plat.c:214:12: warning: 'xhci_plat_resume' defined but not used [-Wunused-function] 1 include/linux/kernel.h:54:38: warning: division by zero [-Wdiv-by-zero] 2 buildall.arm.multi_lpae_defconfig.log.passed:warning: (ARM_HIGHBANK_CPUFREQ) selects GENERIC_CPUFREQ_CPU0 which has unmet direct dependencies (ARCH_HAS_CPUFREQ && CPU_FREQ && HAVE_CLK && REGULATOR && OF && THERMAL && CPU_THERMAL) 2 buildall.arm.multi_v7_defconfig.log.passed:warning: (ARM_HIGHBANK_CPUFREQ) selects GENERIC_CPUFREQ_CPU0 which has unmet direct dependencies (ARCH_HAS_CPUFREQ && CPU_FREQ && HAVE_CLK && REGULATOR && OF && THERMAL && CPU_THERMAL) 3 arch/arm/common/scoop.c:185:6: warning: unused variable 'temp' [-Wunused-variable] 3 drivers/net/wireless/rtl818x/rtl8187/dev.c:595:3: warning: passing argument 2 of 'rtl818x_iowrite8' from incompatible pointer type [enabled by default] 5 drivers/i2c/busses/i2c-mv64xxx.c:760:17: warning: assignment makes pointer from integer without a cast [enabled by default] Section mismatches: 1 integrator_defconfig WARNING: arch/arm/mach-integrator/built-in.o(.data+0x2e0): Section mismatch in reference from the variable impd1_driver to the function .init.text:impd1_probe() 1 integrator_defconfig WARNING: vmlinux.o(.data+0x1ba0): Section mismatch in reference from the variable impd1_driver to the function .init.text:impd1_probe()

10 years, 8 months

mainline boot: 33 passed 0 failed (mainline/v3.14-rc8-12-g75c5a52)

by Olof's autobooter

Failed boards: Successful boards: apc vt8500_v6_v7_defconfig : passed 1:18.99 arndale exynos_defconfig : passed 1:08.04 bbb omap2plus_defconfig : passed 1:37.27 bbb multi_v7_defconfig : passed 1:25.07 beaver tegra_defconfig : passed 0:55.62 beaver multi_v7_defconfig : passed 0:50.66 capri bcm_defconfig : passed 0:43.25 capri multi_v7_defconfig : passed 0:43.98 cubie sunxi_defconfig : passed 0:57.48 cubie multi_v7_defconfig : passed 0:59.48 cubie2 sunxi_defconfig : passed 0:52.77 cubie2 multi_v7_defconfig : passed 0:57.88 cubie2 multi_lpae_defconfig : passed 1:04.68 cubox dove_defconfig : passed 1:05.63 dalmore tegra_defconfig : passed 1:18.54 dalmore multi_v7_defconfig : passed 1:19.86 dalmore multi_lpae_defconfig : passed 1:20.38 hummingboard imx_v6_v7_defconfig : passed 1:21.81 hummingboard multi_v7_defconfig : passed 1:12.62 omap5uevm multi_v7_defconfig : warnings 1:43.18 omap5uevm multi_lpae_defconfig : warnings 1:35.97 panda omap2plus_defconfig : passed 1:13.78 panda multi_v7_defconfig : passed 1:26.08 sama5 sama5_defconfig : passed 1:53.97 seaboard tegra_defconfig : passed 1:02.06 seaboard multi_v7_defconfig : passed 1:08.23 snow exynos_defconfig : passed 1:24.32 snowball u8500_defconfig : passed 1:32.48 snowball multi_v7_defconfig : passed 2:31.50 trimslice tegra_defconfig : passed 0:56.55 trimslice multi_v7_defconfig : passed 1:09.26 wandboard imx_v6_v7_defconfig : passed 0:57.88 wandboard multi_v7_defconfig : passed 1:03.72 Offline boards: omap5uevm omap2plus_defconfig : OFFLINE 2:12.93 Board legend is available at http://arm-soc.lixom.net/boards.html

10 years, 8 months

mainline build: 7 warnings 0 failures (mainline/v3.14-rc8-12-g75c5a52)

by Olof's autobuilder

Here are the build results from automated periodic testing. The tree being built was mainline, found at: http://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git (master branch) Topmost commit: 75c5a52 vfs: Allocate anon_inode_inode in anon_inode_init() Build logs (stderr only) can be found at the following link (experimental): http://arm-soc.lixom.net/buildlogs/mainline/v3.14-rc8-12-g75c5a52/ Runtime: 34m 12s Passed: 123 Failed: 0 Warnings: 7 Section mismatches: 0 ------------------------------------------------------------------------------- Failed defconfigs: ------------------------------------------------------------------------------- Errors: Warnings: 1 drivers/staging/imx-drm/imx-drm-core.c:87:25: warning: unused variable 'imxdrm' [-Wunused-variable] 1 drivers/usb/host/xhci-plat.c:203:12: warning: 'xhci_plat_suspend' defined but not used [-Wunused-function] 1 drivers/usb/host/xhci-plat.c:211:12: warning: 'xhci_plat_resume' defined but not used [-Wunused-function] 2 buildall.arm.multi_lpae_defconfig.log.passed:warning: (ARM_HIGHBANK_CPUFREQ) selects GENERIC_CPUFREQ_CPU0 which has unmet direct dependencies (ARCH_HAS_CPUFREQ && CPU_FREQ && HAVE_CLK && REGULATOR && OF && THERMAL && CPU_THERMAL) 2 buildall.arm.multi_v7_defconfig.log.passed:warning: (ARM_HIGHBANK_CPUFREQ) selects GENERIC_CPUFREQ_CPU0 which has unmet direct dependencies (ARCH_HAS_CPUFREQ && CPU_FREQ && HAVE_CLK && REGULATOR && OF && THERMAL && CPU_THERMAL) Section mismatches:

10 years, 8 months

arm-soc boot: 46 pass, 1 fail (v3.14-rc5-1281-g6673de9)

by Kevin's boot bot

Automated DT boot report for various ARM defconfigs. Tree/Branch: arm-soc Git describe: v3.14-rc5-1281-g6673de9 Failed boot tests (console logs at the end) =========================================== ste-snowball: FAIL: multi_v7_defconfig Full Report =========== omap2plus_defconfig ------------------- legacy,3730xm 0 min 51.9 sec: PASS am335x-boneblack 0 min 25.9 sec: PASS omap3-beagle-xm 1 min 1.3 sec: PASS legacy,3530beagle 0 min 36.2 sec: PASS (Warnings: 1) omap4-panda 1 min 9.2 sec: PASS omap3-overo-tobi 0 min 23.4 sec: PASS (Warnings: 1) am335x-bone 0 min 27.6 sec: PASS omap3-overo-storm-tobi 0 min 23.0 sec: PASS omap5-uevm 1 min 0.9 sec: PASS (Warnings: 1) omap4-panda-es 1 min 8.4 sec: PASS legacy,3730storm 0 min 24.2 sec: PASS legacy,3530overo 0 min 24.4 sec: PASS (Warnings: 1) multi_lpae_defconfig -------------------- omap5-uevm 1 min 51.1 sec: PASS (Warnings: 1) sun7i-a20-cubieboard2 0 min 12.2 sec: PASS tegra_defconfig --------------- tegra30-beaver 0 min 22.2 sec: PASS imx_v6_v7_defconfig ------------------- imx6dl-wandboard,wand-dual 0 min 18.9 sec: PASS imx6dl-wandboard,wand-solo 0 min 18.6 sec: PASS imx6q-wandboard 0 min 17.1 sec: PASS sunxi_defconfig --------------- sun7i-a20-cubieboard2 0 min 22.7 sec: PASS sun4i-a10-cubieboard 0 min 17.7 sec: PASS bcm_defconfig ------------- bcm28155-ap 0 min 23.0 sec: PASS mvebu_v7_defconfig ------------------ armada-xp-openblocks-ax3-4 0 min 22.4 sec: PASS armada-370-mirabox 0 min 20.4 sec: PASS exynos_defconfig ---------------- exynos5250-arndale 0 min 29.7 sec: PASS multi_v7_defconfig ------------------ qcom-apq8074-dragonboard 0 min 16.8 sec: PASS ste-snowball 0 min 50.5 sec: FAIL tegra30-beaver 0 min 17.0 sec: PASS am335x-boneblack 0 min 24.0 sec: PASS omap3-beagle-xm 0 min 49.3 sec: PASS sun7i-a20-cubieboard2 0 min 12.4 sec: PASS armada-370-mirabox 0 min 22.6 sec: PASS omap4-panda 0 min 57.4 sec: PASS armada-xp-openblocks-ax3-4 0 min 25.1 sec: PASS sun4i-a10-cubieboard 0 min 19.0 sec: PASS bcm28155-ap 0 min 26.4 sec: PASS omap3-overo-tobi 0 min 21.7 sec: PASS (Warnings: 1) imx6dl-wandboard,wand-solo 0 min 18.1 sec: PASS am335x-bone 0 min 26.5 sec: PASS omap3-overo-storm-tobi 0 min 24.7 sec: PASS omap5-uevm 1 min 51.1 sec: PASS (Warnings: 1) imx6q-wandboard 0 min 17.1 sec: PASS omap4-panda-es 0 min 51.9 sec: PASS imx6dl-wandboard,wand-dual 0 min 18.3 sec: PASS u8500_defconfig --------------- ste-snowball 0 min 33.0 sec: PASS sama5_defconfig --------------- sama5d35ek 0 min 17.2 sec: PASS davinci_all_defconfig --------------------- legacy,dm365evm 0 min 16.7 sec: PASS da850-evm 0 min 15.1 sec: PASS Console logs for failures ========================= multi_v7_defconfig ------------------ ste-snowball: FAIL: last 80 lines of boot log: ---------------------------------------------- U-Boot 2009.11 (sept. 19 2011 - 17:03:11) CPU: ST-Ericsson db8500 v2 (Dual ARM Cortex A9) 998.400 Mhz I2C: ready DRAM: 1 GB MMC: MCDE: startup failed sec_bridge: ISSWAPI_FLUSH_BOOT_CODE: 2 EMMC: 0, MMC: 1 In: serial Out: serial Err: serial Net: smc911x-0 Hit any key to stop autoboot: 1 0 U8500 $ U8500 $ version version U-Boot 2009.11 (sept. 19 2011 - 17:03:11) U8500 $setenv ethaddr 6e:e6:84:36:8e:9e setenv ethaddr 6e:e6:84:36:8e:9e Can't overwrite "ethaddr" U8500 $ setenv bootargs console=ttyAMA2,115200n8 debug earlyprintk rw root=/dev/mmcblk0p3 rootwait rootfstype=ext4 setenv bootargs console=ttyAMA2,115200n8 debug earlyprintk rw root=/dev/mmcblk0p3 rootwait rootfstype=ext4 U8500 $setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none' setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none' U8500 $ if test -n ${initenv}; then run initenv; fi if test -n ${initenv}; then run initenv; fi U8500 $ if test -n ${preboot}; then run preboot; fi if test -n ${preboot}; then run preboot; fi U8500 $ setenv autoload no; setenv autoboot no setenv autoload no; setenv autoboot no U8500 $ dhcp dhcp smc911x: detected LAN9221 controller smc911x: phy initialized smc911x: MAC 6e:e6:84:36:8e:9e BOOTP broadcast 1 DHCP client bound to address 192.168.1.159 U8500 $ setenv serverip 192.168.1.2 setenv serverip 192.168.1.2 U8500 $ if test -n ${netargs}; then run netargs; fi if test -n ${netargs}; then run netargs; fi U8500 $ tftp 0x00800000 192.168.1.2:tmp/snowball-IHC6MI/tmp1xz6ou-uImage tftp 0x00800000 192.168.1.2:tmp/snowball-IHC6MI/tmp1xz6ou-uImage smc911x: detected LAN9221 controller smc911x: phy initialized smc911x: MAC 6e:e6:84:36:8e:9e Using smc911x-0 device TFTP from server 192.168.1.2; our IP address is 192.168.1.159 Filename 'tmp/snowball-IHC6MI/tmp1xz6ou-uImage'. Load address: 0x800000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ####################################################### done Bytes transferred = 4619809 (467e21 hex) U8500 $ printenv bootargs printenv bootargs bootargs=console=ttyAMA2,115200n8 debug earlyprintk rw root=/dev/mmcblk0p3 rootwait rootfstype=ext4 ip=192.168.1.159:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none U8500 $ bootm 0x00800000 bootm 0x00800000 ## Booting kernel from Legacy Image at 00800000 ... Image Name: Linux Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 4619745 Bytes = 4.4 MB Load Address: 00008000 Entry Point: 00008000 Loading Kernel Image ... OK OK Starting kernel ... ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 50.55 seconds. # PYBOOT: Result: FAIL

10 years, 8 months

arm-soc boot: 29 passed 4 failed (arm-soc/v3.14-rc5-1281-g6673de9)

by Olof's autobooter

Failed boards: cubie2 sunxi_defconfig : FAILED 1:19.03 cubie2 multi_lpae_defconfig : FAILED 0:59.78 panda multi_v7_defconfig : FAILED 1:35.87 snowball multi_v7_defconfig : FAILED 1:10.83 Successful boards: apc vt8500_v6_v7_defconfig : passed 1:20.74 arndale exynos_defconfig : passed 1:03.18 bbb omap2plus_defconfig : passed 1:32.05 bbb multi_v7_defconfig : passed 1:19.85 beaver tegra_defconfig : passed 0:50.34 beaver multi_v7_defconfig : passed 0:49.58 capri bcm_defconfig : passed 0:45.35 capri multi_v7_defconfig : passed 0:44.66 cubie sunxi_defconfig : passed 0:52.03 cubie multi_v7_defconfig : passed 0:59.40 cubie2 multi_v7_defconfig : passed 1:21.22 dalmore tegra_defconfig : passed 1:24.11 dalmore multi_v7_defconfig : passed 1:16.36 dalmore multi_lpae_defconfig : passed 1:17.66 hummingboard imx_v6_v7_defconfig : passed 1:21.34 hummingboard multi_v7_defconfig : passed 1:08.48 omap5uevm omap2plus_defconfig : warnings 1:09.86 omap5uevm multi_v7_defconfig : warnings 1:41.90 omap5uevm multi_lpae_defconfig : warnings 1:36.44 panda omap2plus_defconfig : passed 1:19.26 sama5 sama5_defconfig : passed 1:51.28 seaboard tegra_defconfig : passed 1:04.46 seaboard multi_v7_defconfig : passed 1:13.73 snow exynos_defconfig : passed 1:27.90 snowball u8500_defconfig : passed 1:20.67 trimslice tegra_defconfig : passed 1:01.23 trimslice multi_v7_defconfig : passed 1:00.27 wandboard imx_v6_v7_defconfig : passed 0:54.67 wandboard multi_v7_defconfig : passed 0:59.44 Offline boards: Board legend is available at http://arm-soc.lixom.net/boards.html Last entries of failed logs below: ======================================================================== Board cubie2-multi_lpae_defconfig failure log: ------------------------------------------------- sun7i# tftp 0x40008000 arm-soc/v3.14-rc5-1281-g6673de9/multi_lpae_defconfig/zImage tftp 0x40008000 arm-soc/v3.14-rc5-1281-g6673de9/multi_lpae_defconfig/zImage Using emac device TFTP from server 172.16.1.3; our IP address is 172.16.1.161 Filename 'arm-soc/v3.14-rc5-1281-g6673de9/multi_lpae_defconfig/zImage'. Load address: 0x40008000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ###################################################### 3.8 MiB/s done Bytes transferred = 4604368 (4641d0 hex) sun7i# setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 sun7i# tftp 0x41000000 arm-soc/v3.14-rc5-1281-g6673de9/multi_lpae_defconfig/dtbs/sun7i-a20-cubieboard2.dtb tftp 0x41000000 arm-soc/v3.14-rc5-1281-g6673de9/multi_lpae_defconfig/dtbs/sun7i-a20-cubieboard2.dtb Using emac device TFTP from server 172.16.1.3; our IP address is 172.16.1.161 Filename 'arm-soc/v3.14-rc5-1281-g6673de9/multi_lpae_defconfig/dtbs/sun7i-a20-cubieboard2.dtb'. Load address: 0x41000000 Loading: *## 573.2 KiB/s done Bytes transferred = 18205 (471d hex) sun7i# printenv bootargs printenv bootargs bootargs=console=ttyS0,115200n8 root=/dev/nfs rootwait rw nfsroot=172.16.1.7:/work/nfsroot/cubie2 ip=dhcp sun7i# bootz 0x40008000 - 0x41000000 bootz 0x40008000 - 0x41000000 Kernel image @ 0x40008000 [ 0x000000 - 0x4641d0 ] ## Flattened Device Tree blob at 41000000 Booting using the fdt blob at 0x41000000 Loading Device Tree to 40ff8000, end 40fff71c ... OK Starting kernel ... ~$off # PYBOOT: Exception: timeout ======================================================================== Board cubie2-sunxi_defconfig failure log: ------------------------------------------------- [ 0.013262] bio: create slab <bio-0> at 0 [ 0.013638] reg-fixed-voltage ahci-5v.2: could not find pctldev for node /soc@01c00000/pinctrl@01c20800/ahci_pwr_pin@0, deferring probe [ 0.013661] platform ahci-5v.2: Driver reg-fixed-voltage requests probe deferral [ 0.013683] reg-fixed-voltage usb1-vbus.3: could not find pctldev for node /soc@01c00000/pinctrl@01c20800/usb1_vbus_pin@0, deferring probe [ 0.013699] platform usb1-vbus.3: Driver reg-fixed-voltage requests probe deferral [ 0.013718] reg-fixed-voltage usb2-vbus.4: could not find pctldev for node /soc@01c00000/pinctrl@01c20800/usb2_vbus_pin@0, deferring probe [ 0.013731] platform usb2-vbus.4: Driver reg-fixed-voltage requests probe deferral [ 0.014573] Switched to clocksource arch_sys_counter [ 0.021168] NET: Registered protocol family 2 [ 0.021650] TCP established hash table entries: 8192 (order: 3, 32768 bytes) [ 0.021737] TCP bind hash table entries: 8192 (order: 4, 65536 bytes) [ 0.021860] TCP: Hash tables configured (established 8192 bind 8192) [ 0.021943] TCP: reno registered [ 0.021956] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 0.022013] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 0.022263] NET: Registered protocol family 1 [ 0.022695] RPC: Registered named UNIX socket transport module. [ 0.022708] RPC: Registered udp transport module. [ 0.022713] RPC: Registered tcp transport module. [ 0.022719] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.023637] futex hash table entries: 512 (order: 3, 32768 bytes) [ 0.024133] bounce pool size: 64 pages [ 0.031787] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.031806] io scheduler noop registered [ 0.031812] io scheduler deadline registered [ 0.031992] io scheduler cfq registered (default) [ 0.033840] sunxi-pinctrl 1c20800.pinctrl: initialized sunXi PIO driver [ 0.074525] Serial: 8250/16550 driver, 8 ports, IRQ sharing disabled [ 0.097301] 1c28000.serial: ttyS0 at MMIO 0x1c28000 (irq = 33, base_baud = 1500000) is a U6_16550A [ 0.604102] console [ttyS0] enabled [ 0.608761] mousedev: PS/2 mouse device common for all mice [ 0.614641] i2c /dev entries driver [ 0.620191] TCP: cubic registered [ 0.623514] NET: Registered protocol family 17 [ 0.628085] Registering SWP/SWPB emulation handler [ 0.633776] ahci-5v: 5000 mV [ 0.637068] usb1-vbus: 5000 mV [ 0.640427] usb2-vbus: 5000 mV ~$off # PYBOOT: Exception: timeout ======================================================================== Board panda-multi_v7_defconfig failure log: ------------------------------------------------- [ 1.600036] OMAP4 PM: u-boot >= v2012.07 is required for full PM support [ 1.607421] Registering SWP/SWPB emulation handler [ 1.613098] vwl1271: 1800 mV [ 1.617767] Skipping twl internal clock init and using bootloader value (unknown osc rate) [ 1.627471] twl 0-0048: PIH (irq 39) nested IRQs [ 1.633178] twl_rtc rtc.11: Power up reset detected. [ 1.639068] twl_rtc rtc.11: Enabling TWL-RTC [ 1.646148] twl_rtc rtc.11: rtc core: registered rtc.11 as rtc0 [ 1.652984] VAUX1_6030: 1000 <--> 3000 mV at 2800 mV [ 1.659057] VAUX2_6030: 1200 <--> 2800 mV at 1800 mV [ 1.665161] VAUX3_6030: 1000 <--> 3000 mV at 1200 mV [ 1.671325] VMMC: 1200 <--> 3000 mV at 3000 mV [ 1.676849] VPP: 1800 <--> 2500 mV at 1900 mV [ 1.682312] VUSIM: 1200 <--> 2900 mV at 1800 mV [ 1.687316] VDAC: 1800 mV [ 1.691040] VANA: 2100 mV [ 1.694580] VCXIO: 1800 mV [ 1.697937] VUSB: 3300 mV [ 1.701446] V1V8: 1800 mV [ 1.705017] V2V1: 2100 mV [ 1.810607] usb 1-1: new high-speed USB device number 2 using ehci-omap [ 1.946136] omap_i2c 48070000.i2c: bus 0 rev0.11 at 400 kHz [ 1.954742] omap_i2c 48072000.i2c: bus 1 rev0.11 at 400 kHz [ 1.962036] hub 1-1:1.0: USB hub found [ 1.966125] hub 1-1:1.0: 5 ports detected [ 2.351135] usb 1-1.1: new high-speed USB device number 3 using ehci-omap [ 2.484008] smsc95xx v1.0.4 [ 2.533416] omap_i2c 48060000.i2c: bus 2 rev0.11 at 100 kHz [ 2.540985] omap_i2c 48350000.i2c: bus 3 rev0.11 at 400 kHz [ 2.547332] 4809c000.mmc supply vmmc_aux not found, using dummy regulator [ 2.555999] omap_hsmmc 4809c000.mmc: pins are not configured from the driver [ 2.562622] smsc95xx 1-1.1:1.0 eth0: register 'smsc95xx' at usb-4a064c00.ehci-1.1, smsc95xx USB 2.0 Ethernet, c2:0d:01:93:04:09 [ 2.611755] 480d5000.mmc supply vmmc_aux not found, using dummy regulator [ 2.658416] mmc0: host does not support reading read-only switch. assuming write-enable. [ 2.668792] mmc0: new high speed SDHC card at address b368 [ 2.674987] mmcblk0: mmc0:b368 00000 7.51 GiB [ 2.681060] mmcblk0: p1 p2 [ 15.300933] [sched_delayed] sched: RT throttling activated ~$off # PYBOOT: Exception: timeout ======================================================================== Board snowball-multi_v7_defconfig failure log: ------------------------------------------------- node: snowball status: on *** Unhandled DHCP Option in OFFER/ACK: 28 *** Unhandled DHCP Option in OFFER/ACK: 28 DHCP client bound to address 172.16.1.129 U8500 $ setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 U8500 $ tftp 0x00100000 tmp/snowball-CiwD84/tmpxtGV2z-uImage tftp 0x00100000 tmp/snowball-CiwD84/tmpxtGV2z-uImage smc911x: detected LAN9221 controller smc911x: phy initialized smc911x: MAC 08:00:08:1e:0f:44 Using smc911x-0 device TFTP from server 172.16.1.3; our IP address is 172.16.1.129 Filename 'tmp/snowball-CiwD84/tmpxtGV2z-uImage'. Load address: 0x100000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ####################################################### done Bytes transferred = 4619809 (467e21 hex) U8500 $ printenv bootargs printenv bootargs bootargs=console=ttyAMA2,115200 root=/dev/mmcblk0p4 rootwait rw debug earlyprintk U8500 $ bootm 0x00100000 bootm 0x00100000 ## Booting kernel from Legacy Image at 00100000 ... Image Name: Linux Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 4619745 Bytes = 4.4 MB Load Address: 00008000 Entry Point: 00008000 Loading Kernel Image ... OK OK Starting kernel ... ~$off # PYBOOT: Exception: timeout

10 years, 8 months

← Newer
1
2
3
4
5
6
7
...
34
Older →

Jump to page:

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

Kernel-build-reports March 2014