Kernel-build-reports

kernel-build-reports@lists.linaro.org

107303 discussions

linus/master build: 3 failures 17 warnings (v3.12-rc1)

by Kevin Hilman build bot

Automated build results for all ARM defconfigs. Summarizes all build errors, warnings and section mismatches followed by a per-defconfig summary. Tree/Branch: linus/master Git describe: v3.12-rc1 Commit: 272b98c645 Linux 3.12-rc1 Build Time: 125 min 41 sec Passed: 126 / 129 ( 97.67 %) Failed: 3 / 129 ( 2.33 %) Errors: 1 Warnings: 17 Section Mismatches: 0 Failed defconfigs: arm-pxa3xx_defconfig arm-raumfeld_defconfig arm-cm_x300_defconfig Errors: arm-pxa3xx_defconfig drivers/mtd/nand/pxa3xx_nand.c:1325:2: error: implicit declaration of function ‘pxa3xx_nand_get_variant’ [-Werror=implicit-function-declaration] arm-raumfeld_defconfig drivers/mtd/nand/pxa3xx_nand.c:1325:2: error: implicit declaration of function ‘pxa3xx_nand_get_variant’ [-Werror=implicit-function-declaration] arm-cm_x300_defconfig drivers/mtd/nand/pxa3xx_nand.c:1325:2: error: implicit declaration of function ‘pxa3xx_nand_get_variant’ [-Werror=implicit-function-declaration] ------------------------------------------------------------------------------- defconfigs with issues (other than build errors): arm-spitz_defconfig: 1 warnings 0 mismatches arm-mini2440_defconfig: 1 warnings 0 mismatches arm-multi_v7_defconfig+lpae.config: 16 warnings 0 mismatches arm-iop13xx_defconfig: 1 warnings 0 mismatches arm-corgi_defconfig: 1 warnings 0 mismatches arm-iop32x_defconfig: 1 warnings 0 mismatches ------------------------------------------------------------------------------- Errors summary: 1 3 drivers/mtd/nand/pxa3xx_nand.c:1325:2: error: implicit declaration of function ‘pxa3xx_nand_get_variant’ [-Werror=implicit-function-declaration] Warnings Summary: 17 5 crypto/wp512.c:987:1: warning: the frame size of 1168 bytes is larger than 1024 bytes [-Wframe-larger-than=] 1 drivers/tty/serial/imx.c:1542:6: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] 1 drivers/gpu/host1x/hw/debug_hw.c:175:10: warning: format ‘%x’ expects argument of type ‘unsigned int’, but argument 3 has type ‘dma_addr_t’ [-Wformat] 1 drivers/gpu/host1x/hw/cdma_hw.c:57:3: warning: format ‘%x’ expects argument of type ‘unsigned int’, but argument 5 has type ‘dma_addr_t’ [-Wformat] 1 drivers/dma/ipu/ipu_idmac.c:1235:2: warning: format ‘%x’ expects argument of type ‘unsigned int’, but argument 6 has type ‘dma_addr_t’ [-Wformat] 1 drivers/dma/ipu/ipu_idmac.c:1235:2: warning: format ‘%x’ expects argument of type ‘unsigned int’, but argument 5 has type ‘dma_addr_t’ [-Wformat] 1 drivers/dma/imx-sdma.c:1166:3: warning: format ‘%x’ expects argument of type ‘unsigned int’, but argument 6 has type ‘dma_addr_t’ [-Wformat] 1 drivers/dma/imx-sdma.c:1092:3: warning: format ‘%x’ expects argument of type ‘unsigned int’, but argument 6 has type ‘dma_addr_t’ [-Wformat] 1 drivers/dma/imx-dma.c:960:2: warning: format ‘%x’ expects argument of type ‘unsigned int’, but argument 7 has type ‘dma_addr_t’ [-Wformat] 1 drivers/dma/imx-dma.c:960:2: warning: format ‘%x’ expects argument of type ‘unsigned int’, but argument 6 has type ‘dma_addr_t’ [-Wformat] 1 drivers/dma/imx-dma.c:930:2: warning: format ‘%x’ expects argument of type ‘unsigned int’, but argument 7 has type ‘dma_addr_t’ [-Wformat] 1 drivers/dma/imx-dma.c:930:2: warning: format ‘%x’ expects argument of type ‘unsigned int’, but argument 6 has type ‘dma_addr_t’ [-Wformat] 1 drivers/dma/imx-dma.c:603:4: warning: format ‘%x’ expects argument of type ‘unsigned int’, but argument 9 has type ‘dma_addr_t’ [-Wformat] 1 drivers/dma/imx-dma.c:593:4: warning: format ‘%x’ expects argument of type ‘unsigned int’, but argument 9 has type ‘dma_addr_t’ [-Wformat] 1 drivers/dma/imx-dma.c:579:3: warning: format ‘%x’ expects argument of type ‘unsigned int’, but argument 7 has type ‘dma_addr_t’ [-Wformat] 1 drivers/dma/imx-dma.c:579:3: warning: format ‘%x’ expects argument of type ‘unsigned int’, but argument 6 has type ‘dma_addr_t’ [-Wformat] 1 arch/arm/mach-omap2/gpmc.c:1495:4: warning: format ‘%x’ expects argument of type ‘unsigned int’, but argument 4 has type ‘resource_size_t’ [-Wformat] =============================================================================== Detailed per-defconfig build reports below: ------------------------------------------------------------------------------- arm-spitz_defconfig : PASS, 0 errors, 1 warnings, 0 section mismatches Warnings: crypto/wp512.c:987:1: warning: the frame size of 1168 bytes is larger than 1024 bytes [-Wframe-larger-than=] ------------------------------------------------------------------------------- arm-mini2440_defconfig : PASS, 0 errors, 1 warnings, 0 section mismatches Warnings: crypto/wp512.c:987:1: warning: the frame size of 1168 bytes is larger than 1024 bytes [-Wframe-larger-than=] ------------------------------------------------------------------------------- arm-multi_v7_defconfig+lpae.config : PASS, 0 errors, 16 warnings, 0 section mismatches Warnings: arch/arm/mach-omap2/gpmc.c:1495:4: warning: format ‘%x’ expects argument of type ‘unsigned int’, but argument 4 has type ‘resource_size_t’ [-Wformat] drivers/dma/ipu/ipu_idmac.c:1235:2: warning: format ‘%x’ expects argument of type ‘unsigned int’, but argument 5 has type ‘dma_addr_t’ [-Wformat] drivers/dma/ipu/ipu_idmac.c:1235:2: warning: format ‘%x’ expects argument of type ‘unsigned int’, but argument 6 has type ‘dma_addr_t’ [-Wformat] drivers/dma/imx-sdma.c:1092:3: warning: format ‘%x’ expects argument of type ‘unsigned int’, but argument 6 has type ‘dma_addr_t’ [-Wformat] drivers/dma/imx-sdma.c:1166:3: warning: format ‘%x’ expects argument of type ‘unsigned int’, but argument 6 has type ‘dma_addr_t’ [-Wformat] drivers/dma/imx-dma.c:579:3: warning: format ‘%x’ expects argument of type ‘unsigned int’, but argument 6 has type ‘dma_addr_t’ [-Wformat] drivers/dma/imx-dma.c:579:3: warning: format ‘%x’ expects argument of type ‘unsigned int’, but argument 7 has type ‘dma_addr_t’ [-Wformat] drivers/dma/imx-dma.c:593:4: warning: format ‘%x’ expects argument of type ‘unsigned int’, but argument 9 has type ‘dma_addr_t’ [-Wformat] drivers/dma/imx-dma.c:603:4: warning: format ‘%x’ expects argument of type ‘unsigned int’, but argument 9 has type ‘dma_addr_t’ [-Wformat] drivers/dma/imx-dma.c:930:2: warning: format ‘%x’ expects argument of type ‘unsigned int’, but argument 6 has type ‘dma_addr_t’ [-Wformat] drivers/dma/imx-dma.c:930:2: warning: format ‘%x’ expects argument of type ‘unsigned int’, but argument 7 has type ‘dma_addr_t’ [-Wformat] drivers/dma/imx-dma.c:960:2: warning: format ‘%x’ expects argument of type ‘unsigned int’, but argument 6 has type ‘dma_addr_t’ [-Wformat] drivers/dma/imx-dma.c:960:2: warning: format ‘%x’ expects argument of type ‘unsigned int’, but argument 7 has type ‘dma_addr_t’ [-Wformat] drivers/gpu/host1x/hw/cdma_hw.c:57:3: warning: format ‘%x’ expects argument of type ‘unsigned int’, but argument 5 has type ‘dma_addr_t’ [-Wformat] drivers/gpu/host1x/hw/debug_hw.c:175:10: warning: format ‘%x’ expects argument of type ‘unsigned int’, but argument 3 has type ‘dma_addr_t’ [-Wformat] drivers/tty/serial/imx.c:1542:6: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] ------------------------------------------------------------------------------- arm-pxa3xx_defconfig : FAIL, 1 errors, 0 warnings, 0 section mismatches Errors: drivers/mtd/nand/pxa3xx_nand.c:1325:2: error: implicit declaration of function ‘pxa3xx_nand_get_variant’ [-Werror=implicit-function-declaration] ------------------------------------------------------------------------------- arm-iop13xx_defconfig : PASS, 0 errors, 1 warnings, 0 section mismatches Warnings: crypto/wp512.c:987:1: warning: the frame size of 1168 bytes is larger than 1024 bytes [-Wframe-larger-than=] ------------------------------------------------------------------------------- arm-corgi_defconfig : PASS, 0 errors, 1 warnings, 0 section mismatches Warnings: crypto/wp512.c:987:1: warning: the frame size of 1168 bytes is larger than 1024 bytes [-Wframe-larger-than=] ------------------------------------------------------------------------------- arm-raumfeld_defconfig : FAIL, 1 errors, 0 warnings, 0 section mismatches Errors: drivers/mtd/nand/pxa3xx_nand.c:1325:2: error: implicit declaration of function ‘pxa3xx_nand_get_variant’ [-Werror=implicit-function-declaration] ------------------------------------------------------------------------------- arm-cm_x300_defconfig : FAIL, 1 errors, 0 warnings, 0 section mismatches Errors: drivers/mtd/nand/pxa3xx_nand.c:1325:2: error: implicit declaration of function ‘pxa3xx_nand_get_variant’ [-Werror=implicit-function-declaration] ------------------------------------------------------------------------------- arm-iop32x_defconfig : PASS, 0 errors, 1 warnings, 0 section mismatches Warnings: crypto/wp512.c:987:1: warning: the frame size of 1168 bytes is larger than 1024 bytes [-Wframe-larger-than=] ------------------------------------------------------------------------------- Passed with no errors, warnings or mismatches: arm-realview-smp_defconfig arm-at91rm9200_defconfig arm-pcm027_defconfig arm-rmk-omap3430-ldp.config arm-bcm2835_defconfig arm-ixp4xx_defconfig arm-dove_defconfig arm-nuc950_defconfig arm-ebsa110_defconfig arm-at91sam9261_9g10_defconfig arm-omap2plus_defconfig arm-bockw_defconfig arm-hackkit_defconfig arm-cns3420vb_defconfig arm-u300_defconfig arm-bcm_defconfig arm-exynos_defconfig arm-zeus_defconfig arm-rmk-sa11x0-neponset.config arm-davinci_all_defconfig arm-badge4_defconfig arm-exynos_defconfig+lpae.config arm-nuc960_defconfig arm-shark_defconfig arm-allnoconfig arm-em_x270_defconfig arm-armadillo800eva_defconfig arm-trizeps4_defconfig arm-acs5k_defconfig arm-rmk-realview.config arm-at91sam9260_9g20_defconfig arm-lpc32xx_defconfig arm-rmk-omap4430-ldp-allnoconfig.config arm-rmk-versatile.config arm-vexpress_defconfig arm-ape6evm_defconfig arm-netx_defconfig arm-socfpga_defconfig arm-orion5x_defconfig arm-cm_x2xx_defconfig arm-da8xx_omapl_defconfig arm-omap2plus_defconfig+pm.config arm-at91x40_defconfig arm-cerfcube_defconfig arm-versatile_defconfig arm-am200epdkit_defconfig arm-rmk-omap3430-ldp-allnoconfig.config arm-simpad_defconfig arm-pxa910_defconfig arm-acs5k_tiny_defconfig arm-xcep_defconfig arm-s5pv210_defconfig arm-at91_dt_defconfig arm-palmz72_defconfig arm-ezx_defconfig arm-imote2_defconfig arm-netwinder_defconfig arm-iop33x_defconfig arm-rmk-pxa.config arm-assabet_defconfig arm-magician_defconfig arm-mainstone_defconfig arm-s5pc100_defconfig arm-lager_defconfig arm-spear3xx_defconfig arm-shannon_defconfig arm-at91sam9g45_defconfig arm-prima2_defconfig arm-jornada720_defconfig arm-s3c2410_defconfig arm-pxa255-idp_defconfig arm-h3600_defconfig arm-colibri_pxa270_defconfig arm-nhk8815_defconfig arm-viper_defconfig arm-colibri_pxa300_defconfig arm-pleb_defconfig arm-mmp2_defconfig arm-spear6xx_defconfig arm-eseries_pxa_defconfig arm-ks8695_defconfig arm-imx_v4_v5_defconfig arm-integrator_defconfig arm-footbridge_defconfig arm-pxa168_defconfig arm-multi_v7_defconfig arm-s5p64x0_defconfig arm-rpc_defconfig arm-mxs_defconfig arm-nuc910_defconfig arm-omap1_defconfig arm-kzm9d_defconfig arm-rmk-vexpress-ct9x4.config arm-ep93xx_defconfig arm-keystone_defconfig arm-at91sam9rl_defconfig arm-lubbock_defconfig arm-s3c6400_defconfig arm-imx_v6_v7_defconfig arm-at91sam9263_defconfig arm-mackerel_defconfig arm-clps711x_defconfig arm-collie_defconfig arm-tegra_defconfig arm-lart_defconfig arm-marzen_defconfig arm-kzm9g_defconfig arm-tct_hammer_defconfig arm-mv78xx0_defconfig arm-realview_defconfig arm-msm_defconfig arm-u8500_defconfig arm-h5000_defconfig arm-kirkwood_defconfig arm-mvebu_defconfig arm-lpd270_defconfig arm-rmk-omap4430-ldp.config arm-sama5_defconfig arm-neponset_defconfig arm-spear13xx_defconfig

11 years, 3 months

mainline boot: 10 passed 1 failed (mainline/v3.12-rc1)

by build＠lixom.net

arndale : passed 0:48.12 beaver : passed 1:48.98 cubie : passed 0:51.34 cubie2 : passed 0:57.05 cubox : passed 0:47.83 panda : passed 0:52.03 sama5 : passed 1:56.69 snowball : passed 2:46.53 multi-beaver : passed 0:28.91 multi-panda : passed 0:48.44 multi-snowball : FAILED 0:45.58 Last entries of failed logs below: ======================================================================== Board multi-snowball failure log: ------------------------------------------------- Environment size: 1698/4092 bytes U8500 $ printenv bootargs printenv bootargs bootargs=console=ttyAMA2,115200 root=/dev/mmcblk0p4 rootwait rw debug earlyprintk U8500 $ tftpboot 0x100000 172.16.1.4:/srv/tftp/mainline/v3.12-rc1/uImage.multi-snowball tftpboot 0x100000 172.16.1.4:/srv/tftp/mainline/v3.12-rc1/uImage.multi-snowball smc911x: detected LAN9221 controller smc911x: phy initialized smc911x: MAC 08:00:08:1e:0f:44 Using smc911x-0 device TFTP from server 172.16.1.4; our IP address is 172.16.1.109 Filename '/srv/tftp/mainline/v3.12-rc1/uImage.multi-snowball'. Load address: 0x100000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ############################################### done Bytes transferred = 3567564 (366fcc hex) U8500 $ bootm 0x100000 bootm 0x100000 ## Booting kernel from Legacy Image at 00100000 ... Image Name: Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 3567500 Bytes = 3.4 MB Load Address: 00008000 Entry Point: 00008000 Loading Kernel Image ... OK OK Starting kernel ... ~$off

11 years, 3 months

arm-soc/for-next boot: 21 pass, 2 fail (fixes-for-linus-2-gdcf788d)

by Kevin Hilman build bot

Automated DT boot report for various ARM defconfigs. Boot test simply checks if kernel can boot to initramfs with busybox and run some basic commands (e.g. 'cat /proc/cpuinfo'). Tree/Branch: arm-soc/for-next Git describe: fixes-for-linus-2-gdcf788d Commit: dcf788d5a5 ARM: multi_v7_defconfig: enable ARM_ATAG_DTB_COMPAT Failed boot tests (console logs at the end) =========================================== imx6dl-wandboard,wand-solo: FAIL: arm-imx_v6_v7_defconfig omap3-beagle: FAIL: arm-omap2plus_defconfig Full Report =========== arm-imx_v6_v7_defconfig ----------------------- imx6dl-wandboard,wand-dual PASS: 0 min 16.4 sec imx6dl-wandboard,wand-solo FAIL: 0 min 11.5 sec imx6q-wandboard PASS: 0 min 15.1 sec arm-omap2plus_defconfig ----------------------- omap3-beagle-xm PASS: 0 min 48.5 sec am335x-bone PASS: 0 min 26.8 sec omap3-tobi,3530overo PASS: 0 min 42.7 sec omap4-panda PASS: 1 min 12.5 sec omap4-panda-es PASS: 1 min 18.9 sec omap3-tobi,3730storm PASS: 0 min 42.5 sec omap3-beagle FAIL: 0 min 18.9 sec arm-multi_v7_defconfig ---------------------- omap4-panda-es PASS: 1 min 9.6 sec omap3-beagle-xm PASS: 0 min 52.5 sec am335x-bone PASS: 0 min 38.7 sec sun4i-a10-cubieboard PASS: 0 min 14.5 sec imx6dl-wandboard,wand-solo PASS: 0 min 16.5 sec omap3-tobi,3530overo PASS: 0 min 44.4 sec omap4-panda PASS: 0 min 58.7 sec imx6q-wandboard PASS: 0 min 15.6 sec omap3-tobi,3730storm PASS: 0 min 43.7 sec imx6dl-wandboard,wand-dual PASS: 0 min 16.6 sec omap3-beagle PASS: 0 min 48.4 sec arm-exynos_defconfig -------------------- exynos5250-arndale PASS: 0 min 31.2 sec arm-sama5_defconfig ------------------- sama5d35ek PASS: 0 min 19.5 sec Console logs for failures ========================= arm-imx_v6_v7_defconfig ----------------------- imx6dl-wandboard,wand-solo: FAIL: last 24 lines of boot log: ------------------------------------------------------------ [<80301c94>] (platform_drv_probe+0x0/0x24) from [<8030095c>] (driver_probe_device+0x10c/0x224) [<80300850>] (driver_probe_device+0x0/0x224) from [<80300b08>] (__driver_attach+0x94/0x98) r7:00000000 r6:9f904044 r5:808175f8 r4:9f904010 [<80300a74>] (__driver_attach+0x0/0x98) from [<802feda0>] (bus_for_each_dev+0x5c/0x90) r6:80300a74 r5:808175f8 r4:00000000 r3:9f83b55c [<802fed44>] (bus_for_each_dev+0x0/0x90) from [<80300450>] (driver_attach+0x20/0x28) r6:80805548 r5:9f126300 r4:808175f8 [<80300430>] (driver_attach+0x0/0x28) from [<802fff90>] (bus_add_driver+0xdc/0x264) [<802ffeb4>] (bus_add_driver+0x0/0x264) from [<803011cc>] (driver_register+0x80/0xfc) r8:807ba0b8 r7:8078c46c r6:80825980 r5:00000006 r4:808175f8 [<8030114c>] (driver_register+0x0/0xfc) from [<80301ed0>] (__platform_driver_register+0x50/0x64) r5:00000006 r4:807da588 [<80301e80>] (__platform_driver_register+0x0/0x64) from [<807ba0d0>] (sdhci_esdhc_imx_driver_init+0x18/0x20) [<807ba0b8>] (sdhci_esdhc_imx_driver_init+0x0/0x20) from [<80008898>] (do_one_initcall+0xf4/0x154) [<800087a4>] (do_one_initcall+0x0/0x154) from [<8078cc10>] (kernel_init_freeable+0x104/0x1d0) [<8078cb0c>] (kernel_init_freeable+0x0/0x1d0) from [<805b6c8c>] (kernel_init+0x10/0xec) [<805b6c7c>] (kernel_init+0x0/0xec) from [<8000e978>] (ret_from_fork+0x14/0x3c) r4:00000000 r3:ffffffff Code: e89da800 e1a0c00d e92dd818 e24cb004 (e5903000) ---[ end trace b9e9ad8678bd78b3 ]--- Kernel panic - n~$off # PYBOOT: Exception: kernel: ERROR: failed to boot: Kernel panic # PYBOOT: Time: 11.47 seconds. # PYBOOT: Result: FAIL arm-omap2plus_defconfig ----------------------- omap3-beagle: FAIL: last 24 lines of boot log: ---------------------------------------------- OMAP3 beagleboard.org # if test -n ${initenv}; then run initenv; fi if test -n ${initenv}; then run initenv; fi OMAP3 beagleboard.org # if test -n ${preboot}; then run preboot; fi if test -n ${preboot}; then run preboot; fi (Re)start USB... USB0: USB EHCI 1.00 scanning bus 0 for devices... 2 USB Device(s) found scanning usb for storage devices... 0 Storage Device(s) found scanning usb for ethernet devices... Warning: asx0 using MAC address from net device 1 Ethernet Device(s) found OMAP3 beagleboard.org #setenv autoload no; setenv autoboot no setenv autoload no; setenv autoboot no OMAP3 beagleboard.org # dhcp dhcp ERROR: Need valid 'usbnet_devaddr' to be set at ether.c:2369/usb_eth_init() Waiting for Ethernet connection... done. BOOTP broadcast 1 BOOTP broadcast 2 ~$off # PYBOOT: Exception: u-boot: ERROR: timed-out getting DHCP address. # PYBOOT: Time: 18.85 seconds. # PYBOOT: Result: FAIL

11 years, 3 months

mainline build: 16 warnings 3 failures (mainline/v3.12-rc1)

by build＠lixom.net

Here are the build results from automated periodic testing. The tree being built was mainline, found at: http://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git (master branch) Topmost commit: 272b98c Linux 3.12-rc1 Runtime: 39m 21s Passed: 114 Failed: 3 Warnings: 16 Section mismatches: 0 ------------------------------------------------------------------------------- Failed defconfigs: cm_x300_defconfig pxa3xx_defconfig raumfeld_defconfig ------------------------------------------------------------------------------- Errors: cm_x300_defconfig: drivers/mtd/nand/pxa3xx_nand.c:1325:2: error: implicit declaration of function 'pxa3xx_nand_get_variant' [-Werror=implicit-function-declaration] pxa3xx_defconfig: drivers/mtd/nand/pxa3xx_nand.c:1325:2: error: implicit declaration of function 'pxa3xx_nand_get_variant' [-Werror=implicit-function-declaration] raumfeld_defconfig: drivers/mtd/nand/pxa3xx_nand.c:1325:2: error: implicit declaration of function 'pxa3xx_nand_get_variant' [-Werror=implicit-function-declaration] Warnings: 1 arch/arm/mach-omap2/gpmc.c:1495:4: warning: format '%x' expects argument of type 'unsigned int', but argument 4 has type 'resource_size_t' [-Wformat=] 1 drivers/dma/imx-dma.c:579:3: warning: format '%x' expects argument of type 'unsigned int', but argument 6 has type 'dma_addr_t' [-Wformat=] 1 drivers/dma/imx-dma.c:579:3: warning: format '%x' expects argument of type 'unsigned int', but argument 7 has type 'dma_addr_t' [-Wformat=] 1 drivers/dma/imx-dma.c:593:4: warning: format '%x' expects argument of type 'unsigned int', but argument 9 has type 'dma_addr_t' [-Wformat=] 1 drivers/dma/imx-dma.c:603:4: warning: format '%x' expects argument of type 'unsigned int', but argument 9 has type 'dma_addr_t' [-Wformat=] 1 drivers/dma/imx-dma.c:930:2: warning: format '%x' expects argument of type 'unsigned int', but argument 6 has type 'dma_addr_t' [-Wformat=] 1 drivers/dma/imx-dma.c:930:2: warning: format '%x' expects argument of type 'unsigned int', but argument 7 has type 'dma_addr_t' [-Wformat=] 1 drivers/dma/imx-dma.c:960:2: warning: format '%x' expects argument of type 'unsigned int', but argument 6 has type 'dma_addr_t' [-Wformat=] 1 drivers/dma/imx-dma.c:960:2: warning: format '%x' expects argument of type 'unsigned int', but argument 7 has type 'dma_addr_t' [-Wformat=] 1 drivers/dma/imx-sdma.c:1092:3: warning: format '%x' expects argument of type 'unsigned int', but argument 6 has type 'dma_addr_t' [-Wformat=] 1 drivers/dma/imx-sdma.c:1166:3: warning: format '%x' expects argument of type 'unsigned int', but argument 6 has type 'dma_addr_t' [-Wformat=] 1 drivers/dma/ipu/ipu_idmac.c:1235:2: warning: format '%x' expects argument of type 'unsigned int', but argument 5 has type 'dma_addr_t' [-Wformat=] 1 drivers/dma/ipu/ipu_idmac.c:1235:2: warning: format '%x' expects argument of type 'unsigned int', but argument 6 has type 'dma_addr_t' [-Wformat=] 1 drivers/gpu/host1x/hw/cdma_hw.c:57:3: warning: format '%x' expects argument of type 'unsigned int', but argument 5 has type 'dma_addr_t' [-Wformat=] 1 drivers/gpu/host1x/hw/debug_hw.c:175:10: warning: format '%x' expects argument of type 'unsigned int', but argument 3 has type 'dma_addr_t' [-Wformat=] 1 drivers/tty/serial/imx.c:1542:6: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] Section mismatches:

11 years, 3 months

arm-soc/for-next build: 3 failures 22 warnings (fixes-for-linus-2-gdcf788d)

by Kevin Hilman build bot

Automated build results for all ARM defconfigs. Summarizes all build errors, warnings and section mismatches followed by a per-defconfig summary. Tree/Branch: arm-soc/for-next Git describe: fixes-for-linus-2-gdcf788d Commit: dcf788d5a5 ARM: multi_v7_defconfig: enable ARM_ATAG_DTB_COMPAT Build Time: 138 min 31 sec Passed: 126 / 129 ( 97.67 %) Failed: 3 / 129 ( 2.33 %) Errors: 1 Warnings: 22 Section Mismatches: 0 Failed defconfigs: arm-pxa3xx_defconfig arm-raumfeld_defconfig arm-cm_x300_defconfig Errors: arm-pxa3xx_defconfig drivers/mtd/nand/pxa3xx_nand.c:1325:2: error: implicit declaration of function ‘pxa3xx_nand_get_variant’ [-Werror=implicit-function-declaration] arm-raumfeld_defconfig drivers/mtd/nand/pxa3xx_nand.c:1325:2: error: implicit declaration of function ‘pxa3xx_nand_get_variant’ [-Werror=implicit-function-declaration] arm-cm_x300_defconfig drivers/mtd/nand/pxa3xx_nand.c:1325:2: error: implicit declaration of function ‘pxa3xx_nand_get_variant’ [-Werror=implicit-function-declaration] ------------------------------------------------------------------------------- defconfigs with issues (other than build errors): arm-spitz_defconfig: 1 warnings 0 mismatches arm-mini2440_defconfig: 1 warnings 0 mismatches arm-ebsa110_defconfig: 1 warnings 0 mismatches arm-multi_v7_defconfig+lpae.config: 20 warnings 0 mismatches arm-iop13xx_defconfig: 1 warnings 0 mismatches arm-corgi_defconfig: 1 warnings 0 mismatches arm-iop32x_defconfig: 1 warnings 0 mismatches ------------------------------------------------------------------------------- Errors summary: 1 3 drivers/mtd/nand/pxa3xx_nand.c:1325:2: error: implicit declaration of function ‘pxa3xx_nand_get_variant’ [-Werror=implicit-function-declaration] Warnings Summary: 22 5 crypto/wp512.c:987:1: warning: the frame size of 1168 bytes is larger than 1024 bytes [-Wframe-larger-than=] 1 drivers/tty/serial/imx.c:1542:6: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] 1 drivers/gpu/host1x/hw/debug_hw.c:175:10: warning: format ‘%x’ expects argument of type ‘unsigned int’, but argument 3 has type ‘dma_addr_t’ [-Wformat] 1 drivers/gpu/host1x/hw/cdma_hw.c:57:3: warning: format ‘%x’ expects argument of type ‘unsigned int’, but argument 5 has type ‘dma_addr_t’ [-Wformat] 1 drivers/dma/ste_dma40.c:3593:5: warning: format ‘%x’ expects argument of type ‘unsigned int’, but argument 5 has type ‘resource_size_t’ [-Wformat] 1 drivers/dma/ste_dma40.c:3582:3: warning: format ‘%x’ expects argument of type ‘unsigned int’, but argument 5 has type ‘resource_size_t’ [-Wformat] 1 drivers/dma/ste_dma40.c:3582:3: warning: format ‘%x’ expects argument of type ‘unsigned int’, but argument 4 has type ‘resource_size_t’ [-Wformat] 1 drivers/dma/ste_dma40.c:3228:2: warning: format ‘%x’ expects argument of type ‘unsigned int’, but argument 4 has type ‘resource_size_t’ [-Wformat] 1 drivers/dma/ipu/ipu_idmac.c:1235:2: warning: format ‘%x’ expects argument of type ‘unsigned int’, but argument 6 has type ‘dma_addr_t’ [-Wformat] 1 drivers/dma/ipu/ipu_idmac.c:1235:2: warning: format ‘%x’ expects argument of type ‘unsigned int’, but argument 5 has type ‘dma_addr_t’ [-Wformat] 1 drivers/dma/imx-sdma.c:995:3: warning: format ‘%x’ expects argument of type ‘unsigned int’, but argument 6 has type ‘dma_addr_t’ [-Wformat] 1 drivers/dma/imx-sdma.c:1069:3: warning: format ‘%x’ expects argument of type ‘unsigned int’, but argument 6 has type ‘dma_addr_t’ [-Wformat] 1 drivers/dma/imx-dma.c:962:2: warning: format ‘%x’ expects argument of type ‘unsigned int’, but argument 7 has type ‘dma_addr_t’ [-Wformat] 1 drivers/dma/imx-dma.c:962:2: warning: format ‘%x’ expects argument of type ‘unsigned int’, but argument 6 has type ‘dma_addr_t’ [-Wformat] 1 drivers/dma/imx-dma.c:932:2: warning: format ‘%x’ expects argument of type ‘unsigned int’, but argument 7 has type ‘dma_addr_t’ [-Wformat] 1 drivers/dma/imx-dma.c:932:2: warning: format ‘%x’ expects argument of type ‘unsigned int’, but argument 6 has type ‘dma_addr_t’ [-Wformat] 1 drivers/dma/imx-dma.c:603:4: warning: format ‘%x’ expects argument of type ‘unsigned int’, but argument 9 has type ‘dma_addr_t’ [-Wformat] 1 drivers/dma/imx-dma.c:593:4: warning: format ‘%x’ expects argument of type ‘unsigned int’, but argument 9 has type ‘dma_addr_t’ [-Wformat] 1 drivers/dma/imx-dma.c:579:3: warning: format ‘%x’ expects argument of type ‘unsigned int’, but argument 7 has type ‘dma_addr_t’ [-Wformat] 1 drivers/dma/imx-dma.c:579:3: warning: format ‘%x’ expects argument of type ‘unsigned int’, but argument 6 has type ‘dma_addr_t’ [-Wformat] 1 arch/arm/mach-omap2/gpmc.c:1495:4: warning: format ‘%x’ expects argument of type ‘unsigned int’, but argument 4 has type ‘resource_size_t’ [-Wformat] 1 arch/arm/mach-ebsa110/core.c:225:2: warning: large integer implicitly truncated to unsigned type [-Woverflow] =============================================================================== Detailed per-defconfig build reports below: ------------------------------------------------------------------------------- arm-spitz_defconfig : PASS, 0 errors, 1 warnings, 0 section mismatches Warnings: crypto/wp512.c:987:1: warning: the frame size of 1168 bytes is larger than 1024 bytes [-Wframe-larger-than=] ------------------------------------------------------------------------------- arm-mini2440_defconfig : PASS, 0 errors, 1 warnings, 0 section mismatches Warnings: crypto/wp512.c:987:1: warning: the frame size of 1168 bytes is larger than 1024 bytes [-Wframe-larger-than=] ------------------------------------------------------------------------------- arm-ebsa110_defconfig : PASS, 0 errors, 1 warnings, 0 section mismatches Warnings: arch/arm/mach-ebsa110/core.c:225:2: warning: large integer implicitly truncated to unsigned type [-Woverflow] ------------------------------------------------------------------------------- arm-multi_v7_defconfig+lpae.config : PASS, 0 errors, 20 warnings, 0 section mismatches Warnings: arch/arm/mach-omap2/gpmc.c:1495:4: warning: format ‘%x’ expects argument of type ‘unsigned int’, but argument 4 has type ‘resource_size_t’ [-Wformat] drivers/dma/ipu/ipu_idmac.c:1235:2: warning: format ‘%x’ expects argument of type ‘unsigned int’, but argument 5 has type ‘dma_addr_t’ [-Wformat] drivers/dma/ipu/ipu_idmac.c:1235:2: warning: format ‘%x’ expects argument of type ‘unsigned int’, but argument 6 has type ‘dma_addr_t’ [-Wformat] drivers/dma/imx-sdma.c:995:3: warning: format ‘%x’ expects argument of type ‘unsigned int’, but argument 6 has type ‘dma_addr_t’ [-Wformat] drivers/dma/imx-sdma.c:1069:3: warning: format ‘%x’ expects argument of type ‘unsigned int’, but argument 6 has type ‘dma_addr_t’ [-Wformat] drivers/dma/imx-dma.c:579:3: warning: format ‘%x’ expects argument of type ‘unsigned int’, but argument 6 has type ‘dma_addr_t’ [-Wformat] drivers/dma/imx-dma.c:579:3: warning: format ‘%x’ expects argument of type ‘unsigned int’, but argument 7 has type ‘dma_addr_t’ [-Wformat] drivers/dma/imx-dma.c:593:4: warning: format ‘%x’ expects argument of type ‘unsigned int’, but argument 9 has type ‘dma_addr_t’ [-Wformat] drivers/dma/imx-dma.c:603:4: warning: format ‘%x’ expects argument of type ‘unsigned int’, but argument 9 has type ‘dma_addr_t’ [-Wformat] drivers/dma/imx-dma.c:932:2: warning: format ‘%x’ expects argument of type ‘unsigned int’, but argument 6 has type ‘dma_addr_t’ [-Wformat] drivers/dma/imx-dma.c:932:2: warning: format ‘%x’ expects argument of type ‘unsigned int’, but argument 7 has type ‘dma_addr_t’ [-Wformat] drivers/dma/imx-dma.c:962:2: warning: format ‘%x’ expects argument of type ‘unsigned int’, but argument 6 has type ‘dma_addr_t’ [-Wformat] drivers/dma/imx-dma.c:962:2: warning: format ‘%x’ expects argument of type ‘unsigned int’, but argument 7 has type ‘dma_addr_t’ [-Wformat] drivers/gpu/host1x/hw/cdma_hw.c:57:3: warning: format ‘%x’ expects argument of type ‘unsigned int’, but argument 5 has type ‘dma_addr_t’ [-Wformat] drivers/gpu/host1x/hw/debug_hw.c:175:10: warning: format ‘%x’ expects argument of type ‘unsigned int’, but argument 3 has type ‘dma_addr_t’ [-Wformat] drivers/dma/ste_dma40.c:3228:2: warning: format ‘%x’ expects argument of type ‘unsigned int’, but argument 4 has type ‘resource_size_t’ [-Wformat] drivers/dma/ste_dma40.c:3582:3: warning: format ‘%x’ expects argument of type ‘unsigned int’, but argument 4 has type ‘resource_size_t’ [-Wformat] drivers/dma/ste_dma40.c:3582:3: warning: format ‘%x’ expects argument of type ‘unsigned int’, but argument 5 has type ‘resource_size_t’ [-Wformat] drivers/dma/ste_dma40.c:3593:5: warning: format ‘%x’ expects argument of type ‘unsigned int’, but argument 5 has type ‘resource_size_t’ [-Wformat] drivers/tty/serial/imx.c:1542:6: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] ------------------------------------------------------------------------------- arm-pxa3xx_defconfig : FAIL, 1 errors, 0 warnings, 0 section mismatches Errors: drivers/mtd/nand/pxa3xx_nand.c:1325:2: error: implicit declaration of function ‘pxa3xx_nand_get_variant’ [-Werror=implicit-function-declaration] ------------------------------------------------------------------------------- arm-iop13xx_defconfig : PASS, 0 errors, 1 warnings, 0 section mismatches Warnings: crypto/wp512.c:987:1: warning: the frame size of 1168 bytes is larger than 1024 bytes [-Wframe-larger-than=] ------------------------------------------------------------------------------- arm-corgi_defconfig : PASS, 0 errors, 1 warnings, 0 section mismatches Warnings: crypto/wp512.c:987:1: warning: the frame size of 1168 bytes is larger than 1024 bytes [-Wframe-larger-than=] ------------------------------------------------------------------------------- arm-raumfeld_defconfig : FAIL, 1 errors, 0 warnings, 0 section mismatches Errors: drivers/mtd/nand/pxa3xx_nand.c:1325:2: error: implicit declaration of function ‘pxa3xx_nand_get_variant’ [-Werror=implicit-function-declaration] ------------------------------------------------------------------------------- arm-cm_x300_defconfig : FAIL, 1 errors, 0 warnings, 0 section mismatches Errors: drivers/mtd/nand/pxa3xx_nand.c:1325:2: error: implicit declaration of function ‘pxa3xx_nand_get_variant’ [-Werror=implicit-function-declaration] ------------------------------------------------------------------------------- arm-iop32x_defconfig : PASS, 0 errors, 1 warnings, 0 section mismatches Warnings: crypto/wp512.c:987:1: warning: the frame size of 1168 bytes is larger than 1024 bytes [-Wframe-larger-than=] ------------------------------------------------------------------------------- Passed with no errors, warnings or mismatches: arm-realview-smp_defconfig arm-at91rm9200_defconfig arm-pcm027_defconfig arm-rmk-omap3430-ldp.config arm-bcm2835_defconfig arm-ixp4xx_defconfig arm-dove_defconfig arm-nuc950_defconfig arm-at91sam9261_9g10_defconfig arm-omap2plus_defconfig arm-bockw_defconfig arm-hackkit_defconfig arm-cns3420vb_defconfig arm-u300_defconfig arm-bcm_defconfig arm-exynos_defconfig arm-zeus_defconfig arm-rmk-sa11x0-neponset.config arm-davinci_all_defconfig arm-badge4_defconfig arm-exynos_defconfig+lpae.config arm-nuc960_defconfig arm-shark_defconfig arm-allnoconfig arm-em_x270_defconfig arm-armadillo800eva_defconfig arm-trizeps4_defconfig arm-acs5k_defconfig arm-rmk-realview.config arm-at91sam9260_9g20_defconfig arm-lpc32xx_defconfig arm-rmk-omap4430-ldp-allnoconfig.config arm-rmk-versatile.config arm-vexpress_defconfig arm-ape6evm_defconfig arm-netx_defconfig arm-socfpga_defconfig arm-orion5x_defconfig arm-cm_x2xx_defconfig arm-da8xx_omapl_defconfig arm-omap2plus_defconfig+pm.config arm-at91x40_defconfig arm-cerfcube_defconfig arm-versatile_defconfig arm-am200epdkit_defconfig arm-rmk-omap3430-ldp-allnoconfig.config arm-simpad_defconfig arm-pxa910_defconfig arm-acs5k_tiny_defconfig arm-xcep_defconfig arm-s5pv210_defconfig arm-at91_dt_defconfig arm-palmz72_defconfig arm-ezx_defconfig arm-imote2_defconfig arm-netwinder_defconfig arm-iop33x_defconfig arm-rmk-pxa.config arm-assabet_defconfig arm-magician_defconfig arm-mainstone_defconfig arm-s5pc100_defconfig arm-lager_defconfig arm-spear3xx_defconfig arm-shannon_defconfig arm-at91sam9g45_defconfig arm-prima2_defconfig arm-jornada720_defconfig arm-s3c2410_defconfig arm-pxa255-idp_defconfig arm-h3600_defconfig arm-colibri_pxa270_defconfig arm-nhk8815_defconfig arm-viper_defconfig arm-colibri_pxa300_defconfig arm-pleb_defconfig arm-mmp2_defconfig arm-spear6xx_defconfig arm-eseries_pxa_defconfig arm-ks8695_defconfig arm-imx_v4_v5_defconfig arm-integrator_defconfig arm-footbridge_defconfig arm-pxa168_defconfig arm-multi_v7_defconfig arm-s5p64x0_defconfig arm-rpc_defconfig arm-mxs_defconfig arm-nuc910_defconfig arm-omap1_defconfig arm-kzm9d_defconfig arm-rmk-vexpress-ct9x4.config arm-ep93xx_defconfig arm-keystone_defconfig arm-at91sam9rl_defconfig arm-lubbock_defconfig arm-s3c6400_defconfig arm-imx_v6_v7_defconfig arm-at91sam9263_defconfig arm-mackerel_defconfig arm-clps711x_defconfig arm-collie_defconfig arm-tegra_defconfig arm-lart_defconfig arm-marzen_defconfig arm-kzm9g_defconfig arm-tct_hammer_defconfig arm-mv78xx0_defconfig arm-realview_defconfig arm-msm_defconfig arm-u8500_defconfig arm-h5000_defconfig arm-kirkwood_defconfig arm-mvebu_defconfig arm-lpd270_defconfig arm-rmk-omap4430-ldp.config arm-sama5_defconfig arm-neponset_defconfig arm-spear13xx_defconfig

11 years, 3 months

arm-soc boot: 1 passed 10 failed (arm-soc/v3.11-8721-gdcf788d)

by build＠lixom.net

arndale : FAILED 0:50.42 beaver : FAILED 0:39.98 cubie : FAILED 0:41.20 cubie2 : FAILED 0:40.27 cubox : FAILED 1:01.44 panda : passed 0:48.77 sama5 : FAILED 0:38.97 snowball : FAILED 0:40.12 multi-beaver : FAILED 0:40.10 multi-panda : FAILED 0:41.52 multi-snowball : FAILED 0:40.39 Last entries of failed logs below: ======================================================================== Board arndale failure log: ------------------------------------------------- setenv autoboot no ARNDALE5250 # printenv printenv autoboot=no autoload=no baudrate=115200 bootargs=console=ttySAC2,115200n8 earlyprintk debug root=/dev/mmcblk0p1 rootwait rw bootcmd=run net_boot bootdelay=3 bootfile=arm-soc/v3.11-8721-gdcf788d/uImage.exynos dnsip=172.16.1.1 ethact=asx0 gatewayip=172.16.1.1 initrd_high=0x7fffffff ipaddr=172.16.1.140 legacy=usb start ; bootp ; tftpboot 0x40800000 172.16.1.7:/srv/tftp/uImage.arndale && bootm 0x40800000 net_boot=bootp ; tftpboot 0x40800000 172.16.1.4:/srv/tftp/uImage.exynos && tftpboot 0x407c0000 172.16.1.4:/srv/tftp/exynos5250-arndale.dtb && bootm 0x40800000 - 0x407c0000 netmask=255.255.255.0 preboot=usb start serverip=172.16.1.7 stderr=serial stdin=serial stdout=serial usbethaddr=00:40:5c:26:0a:5b Environment size: 749/16380 bytes ARNDALE5250 # printenv bootargs printenv bootargs bootargs=console=ttySAC2,115200n8 earlyprintk debug root=/dev/mmcblk0p1 rootwait rw ARNDALE5250 # tftpboot 0x40800000 172.16.1.4:/srv/tftp/arm-soc/v3.11-8721-gdcf788d/uImage.exynos tftpboot 0x40800000 172.16.1.4:/srv/tftp/arm-soc/v3.11-8721-gdcf788d/uImage.exynos Waiting for Ethernet connection... done. Using asx0 device TFTP from server 172.16.1.4; our IP address is 172.16.1.140 Filename '/srv/tftp/arm-soc/v3.11-8721-gdcf788d/uImage.exynos'. Load address: 0x40800000 Loading: * TFTP error: 'File not found' (1) Not retrying... ARNDALE5250 # ~$off ======================================================================== Board beaver failure log: ------------------------------------------------- cpu=armv7 dnsip=172.16.1.1 ethact=asx0 fdt_addr_r=0x82000000 gatewayip=172.16.1.1 initrd_high=0xffffffff ipaddr=172.16.1.145 kernel_addr_r=0x81000000 loadaddr=0x80408000 mmc_boot=setenv devtype mmc; if mmc dev ${devnum}; then run scan_boot; fi netmask=255.255.255.0 ramdisk_addr_r=0x82100000 rootpart=1 scan_boot=echo Scanning ${devtype} ${devnum}...; for prefix in ${boot_prefixes}; do for script in ${boot_scripts}; do run script_boot; done; done; script_boot=if load ${devtype} ${devnum}:${rootpart} ${scriptaddr} ${prefix}${script}; then echo ${script} found! Executing ...;source ${scriptaddr};fi; scriptaddr=0x90000000 serverip=172.16.1.7 soc=tegra30 stderr=serial stdin=serial stdout=serial usb_boot=setenv devtype usb; run usb_init; if usb dev ${devnum}; then run scan_boot; fi usb_init=if ${usb_need_init}; then set usb_need_init false; usb start 0; fi usbethaddr=58:6d:8f:50:ba:18 vendor=nvidia Environment size: 1600/8188 bytes Tegra30 (Beaver) # printenv bootargs printenv bootargs bootargs=console=ttyS0,115200 earlyprintk debug root=/dev/mmcblk0p1 rootwait Tegra30 (Beaver) # tftpboot 0x82000000 172.16.1.4:/srv/tftp/arm-soc/v3.11-8721-gdcf788d/uImage.tegra30 tftpboot 0x82000000 172.16.1.4:/srv/tftp/arm-soc/v3.11-8721-gdcf788d/uImage.tegra30 Using asx0 device TFTP from server 172.16.1.4; our IP address is 172.16.1.145 Filename '/srv/tftp/arm-soc/v3.11-8721-gdcf788d/uImage.tegra30'. Load address: 0x82000000 Loading: * TFTP error: 'File not found' (1) Not retrying... Tegra30 (Beaver) # ~$off ======================================================================== Board cubie failure log: ------------------------------------------------- bootdelay=3 bootenv=uEnv.txt bootfile=arm-soc/v3.11-8721-gdcf788d/uImage.multi-1g bootscr=boot.scr console=ttyS0,115200 device=mmc dnsip=172.16.1.1 ethact=emac ethaddr=08:00:08:1e:2f:44 gatewayip=172.16.1.1 ipaddr=172.16.1.128 kernel=uImage loadbootenv=fatload $device $partition $scriptaddr ${bootenv} || ext2load $device $partition $scriptaddr boot/${bootenv} || ext2load $device $partition $scriptaddr ${bootenv} loadbootscr=fatload $device $partition $scriptaddr ${bootscr} || ext2load $device $partition $scriptaddr boot/${bootscr} ||ext2load $device $partition $scriptaddr ${bootscr} loadkernel=if bootpath=/boot/ && ext2load $device $partition 0x43000000 ${bootpath}script.bin && ext2load $device $partition 0x48000000 ${bootpath}${kernel};then true; elif bootpath=/ && fatload $device $partition 0x43000000 script.bin && fatload $device $partition 0x48000000 ${kernel};then true; elif bootpath=/ && ext2load $device $partition 0x43000000 ${bootpath}script.bin && ext2load $device $partition 0x48000000 ${bootpath}${kernel};then true; else false;fi loglevel=8 netmask=255.255.255.0 panicarg=panic=10 partition=0:1 scriptaddr=0x44000000 serverip=172.16.1.4 setargs=if test -z \\"$root\\"; then if test \\"$bootpath\\" = "boot/"; then root="/dev/mmcblk0p1 rootwait"; else root="/dev/mmcblk0p2 rootwait"; fi; fi; setenv bootargs console=${console} root=${root} loglevel=${loglevel} ${panicarg} ${extraargs} stderr=serial stdin=serial stdout=serial Environment size: 2099/131068 bytes sun4i#printenv bootargs printenv bootargs bootargs=console=ttyS0,115200n8 root=/dev/nfs rootwait rw nfsroot=172.16.1.7:/work/nfsroot/cubie ip=dhcp sun4i#tftpboot 0x41000000 172.16.1.4:/srv/tftp/arm-soc/v3.11-8721-gdcf788d/uImage.multi-1g tftpboot 0x41000000 172.16.1.4:/srv/tftp/arm-soc/v3.11-8721-gdcf788d/uImage.multi-1g Using emac device TFTP from server 172.16.1.4; our IP address is 172.16.1.128 Filename '/srv/tftp/arm-soc/v3.11-8721-gdcf788d/uImage.multi-1g'. Load address: 0x41000000 Loading: * TFTP error: 'File not found' (1) Not retrying... sun4i#~$off ======================================================================== Board cubie2 failure log: ------------------------------------------------- bootdelay=3 bootenv=uEnv.txt bootfile=arm-soc/v3.11-8721-gdcf788d/uImage.multi-1g bootscr=boot.scr console=ttyS0,115200 device=mmc dnsip=172.16.1.1 ethact=emac ethaddr=08:00:08:1e:2f:64 gatewayip=172.16.1.1 ipaddr=172.16.1.107 kernel=uImage loadbootenv=fatload $device $partition $scriptaddr ${bootenv} || ext2load $device $partition $scriptaddr boot/${bootenv} || ext2load $device $partition $scriptaddr ${bootenv} loadbootscr=fatload $device $partition $scriptaddr ${bootscr} || ext2load $device $partition $scriptaddr boot/${bootscr} ||ext2load $device $partition $scriptaddr ${bootscr} loadkernel=if bootpath=/boot/ && ext2load $device $partition 0x43000000 ${bootpath}script.bin && ext2load $device $partition 0x48000000 ${bootpath}${kernel};then true; elif bootpath=/ && fatload $device $partition 0x43000000 script.bin && fatload $device $partition 0x48000000 ${kernel};then true; elif bootpath=/ && ext2load $device $partition 0x43000000 ${bootpath}script.bin && ext2load $device $partition 0x48000000 ${bootpath}${kernel};then true; else false;fi loglevel=8 netmask=255.255.255.0 panicarg=panic=10 partition=0:1 scriptaddr=0x44000000 serverip=172.16.1.4 setargs=if test -z \\"$root\\"; then if test \\"$bootpath\\" = "boot/"; then root="/dev/mmcblk0p1 rootwait"; else root="/dev/mmcblk0p2 rootwait"; fi; fi; setenv bootargs console=${console} root=${root} loglevel=${loglevel} ${panicarg} ${extraargs} stderr=serial stdin=serial stdout=serial Environment size: 2100/131068 bytes sun7i#printenv bootargs printenv bootargs bootargs=console=ttyS0,115200n8 root=/dev/nfs rootwait rw nfsroot=172.16.1.7:/work/nfsroot/cubie2 ip=dhcp sun7i#tftpboot 0x41000000 172.16.1.4:/srv/tftp/arm-soc/v3.11-8721-gdcf788d/uImage.multi-1g tftpboot 0x41000000 172.16.1.4:/srv/tftp/arm-soc/v3.11-8721-gdcf788d/uImage.multi-1g Using emac device TFTP from server 172.16.1.4; our IP address is 172.16.1.107 Filename '/srv/tftp/arm-soc/v3.11-8721-gdcf788d/uImage.multi-1g'. Load address: 0x41000000 Loading: * TFTP error: 'File not found' (1) Not retrying... sun7i#~$off ======================================================================== Board cubox failure log: ------------------------------------------------- enaVpuPower=no enaGpuPower=yes autoload=no bootfile=arm-soc/v3.11-8721-gdcf788d/uImage.cubox autoboot=no Environment size: 3958/65532 bytes CuBox>> printenv bootargs printenv bootargs bootargs=console=ttyS0,115200n8 root=/dev/mmcblk0p2 rootwait CuBox>> tftpboot 0x2000000 172.16.1.4:/srv/tftp/arm-soc/v3.11-8721-gdcf788d/uImage.cubox tftpboot 0x2000000 172.16.1.4:/srv/tftp/arm-soc/v3.11-8721-gdcf788d/uImage.cubox Using egiga0 device TFTP from server 172.16.1.4; our IP address is 172.16.1.183 Filename '/srv/tftp/arm-soc/v3.11-8721-gdcf788d/uImage.cubox'. Load address: 0x2000000 Loading: * TFTP error: 'File not found' (1) Starting again error Using egiga0 device TFTP from server 172.16.1.4; our IP address is 172.16.1.183 Filename '/srv/tftp/arm-soc/v3.11-8721-gdcf788d/uImage.cubox'. Load address: 0x2000000 Loading: * TFTP error: 'File not found' (1) Starting again error Using egiga0 device TFTP from server 172.16.1.4; our IP address is 172.16.1.183 Filename '/srv/tftp/arm-soc/v3.11-8721-gdcf788d/uImage.cubox'. Load address: 0x2000000 Loading: * TFTP error: 'File not found' (1) Starting again error ~$off ======================================================================== Board sama5 failure log: ------------------------------------------------- setenv bootfile arm-soc/v3.11-8721-gdcf788d/uImage.sama5 U-Boot> setenv autoboot no setenv autoboot no U-Boot> printenv printenv autoboot=no autoload=no baudrate=115200 bootargs=console=ttyS0,115200 root=/dev/mmcblk0p1 rootwait rw debug bootcmd=nand read 0x21000000 0x00180000 0x0000509E; nand read 0x22000000 0x00200000 0x00281428; bootm 0x22000000 - 0x21000000 bootdelay=6 bootfile=arm-soc/v3.11-8721-gdcf788d/uImage.sama5 eth1addr=08:00:08:e1:88:0e ethact=gmacb0 ethprime=gmacb0 ipaddr=172.16.1.199 legacy_bootargs=console=ttyS0,115200 mtdparts=atmel_nand:8M(bootstrap/uboot/kernel)ro,-(rootfs) rw rootfstype=ubifs ubi.mtd=1 root=ubi0:rootfs serverip=172.16.1.4 stderr=serial stdin=serial stdout=serial Environment size: 610/131067 bytes U-Boot> setenv bootargs 'console=ttyS0,115200 root=/dev/mmcblk0p1 rootwait rw' setenv bootargs 'console=ttyS0,115200 root=/dev/mmcblk0p1 rootwait rw' U-Boot> printenv bootargs printenv bootargs bootargs=console=ttyS0,115200 root=/dev/mmcblk0p1 rootwait rw U-Boot> tftpboot 0x22000000 172.16.1.4:/srv/tftp/arm-soc/v3.11-8721-gdcf788d/uImage.sama5 tftpboot 0x22000000 172.16.1.4:/srv/tftp/arm-soc/v3.11-8721-gdcf788d/uImage.sama5 gmacb0: PHY present at 1 gmacb0: link up, 1000Mbps full-duplex (lpa: 0x0300) Using gmacb0 device TFTP from server 172.16.1.4; our IP address is 172.16.1.199 Filename '/srv/tftp/arm-soc/v3.11-8721-gdcf788d/uImage.sama5'. Load address: 0x22000000 Loading: * TFTP error: 'File not found' (1) Not retrying... U-Boot> ~$off ======================================================================== Board snowball failure log: ------------------------------------------------- emmcargs=setenv bootargs ${bootargs} root=/dev/mmcblk0p3 rootwait addcons=setenv bootargs ${bootargs} console=${console} emmcboot=echo Booting from eMMC ...; run commonargs emmcargs memargs; bootm ${loadaddr} mmcargs=setenv bootargs ${bootargs} root=/dev/mmcblk1p2 rootwait mmcboot=echo Booting from external MMC ...; run commonargs mmcargs memargs; bootm ${loadaddr} ethact=smc911x-0 bootdelay=5 bootargs=console=ttyAMA2,115200 root=/dev/mmcblk0p4 rootwait rw debug earlyprintk ethaddr=08:00:08:1e:0f:44 stdin=serial stdout=serial stderr=serial board_id=1 startup_graphics=0 logo=0 crashkernel=crashkernel=1M@0x5600000 autoload=no netmask=255.255.255.0 ipaddr=172.16.1.109 serverip=172.16.1.7 bootfile=arm-soc/v3.11-8721-gdcf788d/uImage.snowball autoboot=no Environment size: 1701/4092 bytes U8500 $ printenv bootargs printenv bootargs bootargs=console=ttyAMA2,115200 root=/dev/mmcblk0p4 rootwait rw debug earlyprintk U8500 $ tftpboot 0x100000 172.16.1.4:/srv/tftp/arm-soc/v3.11-8721-gdcf788d/uImage.snowball tftpboot 0x100000 172.16.1.4:/srv/tftp/arm-soc/v3.11-8721-gdcf788d/uImage.snowball smc911x: detected LAN9221 controller smc911x: phy initialized smc911x: MAC 08:00:08:1e:0f:44 Using smc911x-0 device TFTP from server 172.16.1.4; our IP address is 172.16.1.109 Filename '/srv/tftp/arm-soc/v3.11-8721-gdcf788d/uImage.snowball'. Load address: 0x100000 Loading: * TFTP error: 'File not found' (1) Not retrying... U8500 $ ~$off ======================================================================== Board multi-beaver failure log: ------------------------------------------------- cpu=armv7 dnsip=172.16.1.1 ethact=asx0 fdt_addr_r=0x82000000 gatewayip=172.16.1.1 initrd_high=0xffffffff ipaddr=172.16.1.145 kernel_addr_r=0x81000000 loadaddr=0x80408000 mmc_boot=setenv devtype mmc; if mmc dev ${devnum}; then run scan_boot; fi netmask=255.255.255.0 ramdisk_addr_r=0x82100000 rootpart=1 scan_boot=echo Scanning ${devtype} ${devnum}...; for prefix in ${boot_prefixes}; do for script in ${boot_scripts}; do run script_boot; done; done; script_boot=if load ${devtype} ${devnum}:${rootpart} ${scriptaddr} ${prefix}${script}; then echo ${script} found! Executing ...;source ${scriptaddr};fi; scriptaddr=0x90000000 serverip=172.16.1.7 soc=tegra30 stderr=serial stdin=serial stdout=serial usb_boot=setenv devtype usb; run usb_init; if usb dev ${devnum}; then run scan_boot; fi usb_init=if ${usb_need_init}; then set usb_need_init false; usb start 0; fi usbethaddr=58:6d:8f:50:ba:18 vendor=nvidia Environment size: 1601/8188 bytes Tegra30 (Beaver) # printenv bootargs printenv bootargs bootargs=console=ttyS0,115200 earlyprintk debug root=/dev/mmcblk0p1 rootwait Tegra30 (Beaver) # tftpboot 0x82000000 172.16.1.4:/srv/tftp/arm-soc/v3.11-8721-gdcf788d/uImage.multi-2g tftpboot 0x82000000 172.16.1.4:/srv/tftp/arm-soc/v3.11-8721-gdcf788d/uImage.multi-2g Using asx0 device TFTP from server 172.16.1.4; our IP address is 172.16.1.145 Filename '/srv/tftp/arm-soc/v3.11-8721-gdcf788d/uImage.multi-2g'. Load address: 0x82000000 Loading: * TFTP error: 'File not found' (1) Not retrying... Tegra30 (Beaver) # ~$off ======================================================================== Board multi-panda failure log: ------------------------------------------------- Panda # setenv autoboot no setenv autoboot no Panda # printenv printenv autoboot=no autoload=no baudrate=115200 bootargs=console=ttyO2,115200 root=/dev/mmcblk0p2 rootwait debug earlyprintk bootcmd=run usb_boot ; run legacy ; run local bootdelay=1 bootfile=arm-soc/v3.11-8721-gdcf788d/uImage.multi-2g console=ttyO2,115200n8 ethact=sms0 fdt_high=0xffffffff gatewayip=172.16.1.1 hostname=panda-es ipaddr=172.16.1.182 legacy=usb start ; bootp ; tftpboot 0x80000000 172.16.1.7:/srv/tftp/uImage.panda && bootm 0x80000000 loadaddr=0x80000000 local=mmc rescan 0 ; fatload mmc 0:1 0x80000000 uImage && bootm 0x80000000 netmask=255.255.255.0 serverip=172.16.1.7 usb_boot=usb start ; bootp ; tftpboot 0x80000000 172.16.1.7:/srv/tftp/uImage.panda && tftp 0x81000000 172.16.1.7:/srv/tftp/omap4-panda.dtb && bootm 0x80000000 - 0x81000000 usbethaddr=2E:60:67:E0:49:01 Environment size: 822/131068 bytes Panda # printenv bootargs printenv bootargs bootargs=console=ttyO2,115200 root=/dev/mmcblk0p2 rootwait debug earlyprintk Panda # tftpboot 0x80000000 172.16.1.4:/srv/tftp/arm-soc/v3.11-8721-gdcf788d/uImage.multi-2g tftpboot 0x80000000 172.16.1.4:/srv/tftp/arm-soc/v3.11-8721-gdcf788d/uImage.multi-2g Waiting for Ethernet connection... done. Using sms0 device TFTP from server 172.16.1.4; our IP address is 172.16.1.182 Filename '/srv/tftp/arm-soc/v3.11-8721-gdcf788d/uImage.multi-2g'. Load address: 0x80000000 Loading: * TFTP error: 'File not found' (1) Not retrying... Panda # ~$off ======================================================================== Board multi-snowball failure log: ------------------------------------------------- emmcargs=setenv bootargs ${bootargs} root=/dev/mmcblk0p3 rootwait addcons=setenv bootargs ${bootargs} console=${console} emmcboot=echo Booting from eMMC ...; run commonargs emmcargs memargs; bootm ${loadaddr} mmcargs=setenv bootargs ${bootargs} root=/dev/mmcblk1p2 rootwait mmcboot=echo Booting from external MMC ...; run commonargs mmcargs memargs; bootm ${loadaddr} ethact=smc911x-0 bootdelay=5 bootargs=console=ttyAMA2,115200 root=/dev/mmcblk0p4 rootwait rw debug earlyprintk ethaddr=08:00:08:1e:0f:44 stdin=serial stdout=serial stderr=serial board_id=1 startup_graphics=0 logo=0 crashkernel=crashkernel=1M@0x5600000 autoload=no netmask=255.255.255.0 ipaddr=172.16.1.109 serverip=172.16.1.7 bootfile=arm-soc/v3.11-8721-gdcf788d/uImage.multi-snowball autoboot=no Environment size: 1707/4092 bytes U8500 $ printenv bootargs printenv bootargs bootargs=console=ttyAMA2,115200 root=/dev/mmcblk0p4 rootwait rw debug earlyprintk U8500 $ tftpboot 0x100000 172.16.1.4:/srv/tftp/arm-soc/v3.11-8721-gdcf788d/uImage.multi-snowball tftpboot 0x100000 172.16.1.4:/srv/tftp/arm-soc/v3.11-8721-gdcf788d/uImage.multi-snowball smc911x: detected LAN9221 controller smc911x: phy initialized smc911x: MAC 08:00:08:1e:0f:44 Using smc911x-0 device TFTP from server 172.16.1.4; our IP address is 172.16.1.109 Filename '/srv/tftp/arm-soc/v3.11-8721-gdcf788d/uImage.multi-snowball'. Load address: 0x100000 Loading: * TFTP error: 'File not found' (1) Not retrying... U8500 $ ~$off

11 years, 3 months

Auto-builder/tester feedback

by Stephen Warren

Here's a list of features that I think would be useful for the arm-soc(?) auto-builder/tester systems. This is a big pie-in-the-sky wish-list so I'm well aware that I'm asking someone to implement something useful and complex for me for free, and hence I may well not get want I want:-) Still, there are some fun ideas below, I hope! * Per-build/test email distribution list. If there is a change to e.g. the tegra_defconfig build status (first broken build, first successful build, etc.), I'd like to be emailed about this specifically, likely in a separate email. That way, I can filter these actionable messages separately from the general list content, so that I generally don't need to read most of the list messages, unless I'm notified of a specific problem. This could be implemented by adding me to To:/Cc: on the existing messages in addition to sending them to the list, rather than sending a separate notification. However, this still means that I need to read through the whole email to find the specific issue that I'm interested in. * Web-based UI, with history and filtering. Email is very useful for notification of changes. However, if I want to quickly check the current status, or research historic build status, I find a web UI much easier. Some public examples that I use: http://nvt.pwsan.com/experimental/linux-next/testlogs/ http://kisskb.ellerman.id.au/kisskb/matrix/ http://kisskb.ellerman.id.au/kisskb/config/338/ I'd love the ability to restrict the history so I can see just one architecture, compiler, defconfig, branch, board, test-case, or somewhat arbitrary combinations thereof. Perhaps throw HW configuration into the mix too (e.g. single-CPU vs. SMP vs. a specific core count, different RAM-size bands, presence of certain HW such as SPI flash, etc.) * Archival of full build/test logs Perhaps not so much for build problems, but it can be useful to have an entire console log for test failures. Preferably, these would all be linked from the web UI filtered history view. * More test-cases Boot test catches a lot of issues, but I'd love to run tests such as the following: + Reboot + Shutdown + System suspend/resume + CPU hotplug + check that cpuidle is activating + force cpufreq to min/max to check it works, or similar + dd from SD or eMMC, perhaps check for performance changes + Play audio, and at least check that it takes the right amount of time; doesn't hang or cause kernel oops. Perhaps also loop it back and validate that capture roughly approximates playback sound (e.g. FFT a sine wave or similar?) + Test I2C transactions (likely tested by playing audio on many systems, but some explicit i2cget's wouldn't hurt. + USB, e.g. lsusb, ping over a USB NIC, dd from USB mass storage? + hexdump an SPI flash, validate against expected content. Perhaps do a write test too on a specific flash region? + Verify HDMI signal is generated. Perhaps use xrandr/... to test changing video modes + Test WiFi, Bluetooth connectivity + Test PCIe devices are detected, and work + crypto driver tests + kexec I run all of those manually sometimes. Some more often than others. Not often enough though in many cases! It'd be awesome if they ran automatically e.g. nightly, or on every commit. I would love each test to be a standalone script file that developers could just check out from git and run themselves to reproduce problems, without having to set up their build/target systems identically to the auto-build/test systems. Hopefully they would report status in a standard way to ease integration into the test framework. Some ability to run a stress-test (manually, automatically but less often?) to weed out problems that happen with low frequency. * Automated bisect If a build or test fails, bisect to find the problematic commit, automatically, and email people about the result. * "Virtual" submissions Send the system a git URL, and have it run the same set of builds/tests as it would if those commits appeared in a branch it usually tested automatically. Very useful for testing something across a range of HW before sending it or applying it, so problems can be caught early rather than once something is in linux-next. A command-line or email-based interface to do this, for ease-of-use, perhaps in addition to a web form, which would probably lower the barrier to usage for some people. There may be some security issues here re: letting arbitrary people compile/run kernel code on the test systems. Implementing ACLs would probably be annoying. Perhaps branches would have to be pushed to some git server, which would implement the ACLs? Say, trust all kernel.org repos? * Packaged project The ability to install the system locally, e.g.: + My own system can run tests that the main system might not be so interested in. This way, I get to use the same test infra-structure for everything, to avoid duplicating it. + My system could run extreme levels of stress testing. + My system could be more open in who I accept "virtual" submissions from for Tegra HW (e.g anyone @nvidia.com or using specific internal git servers/branches perhaps). + My system can use boards that aren't available to the main system, or that the main system isn't interested in. This will give me more coverage. For example, I could test every single Tegra board to enable extreme paranoia, rather than a representative sample in the main system. * Apply similar testing to U-Boot, other relevant bootloader, or other useful projects! * The human and computer resources to back this up Implementing much of the above is a lot of work to code, and support. It'll require quite a bit of HW to run on. (Note that this not a comment on the current arm-soc builder or other public systems I linked to above, but some internal system...)

11 years, 3 months

next boot: 10 passed 1 failed (next/next-20130916)

by build＠lixom.net

arndale : passed 0:47.26 beaver : passed 1:46.06 cubie : passed 0:50.86 cubie2 : passed 0:58.54 cubox : passed 0:47.74 panda : passed 0:51.84 sama5 : passed 1:44.96 snowball : passed 1:19.07 multi-beaver : passed 0:28.74 multi-panda : passed 0:50.35 multi-snowball : FAILED 0:45.71 Last entries of failed logs below: ======================================================================== Board multi-snowball failure log: ------------------------------------------------- Environment size: 1698/4092 bytes U8500 $ printenv bootargs printenv bootargs bootargs=console=ttyAMA2,115200 root=/dev/mmcblk0p4 rootwait rw debug earlyprintk U8500 $ tftpboot 0x100000 172.16.1.4:/srv/tftp/next/next-20130916/uImage.multi-snowball tftpboot 0x100000 172.16.1.4:/srv/tftp/next/next-20130916/uImage.multi-snowball smc911x: detected LAN9221 controller smc911x: phy initialized smc911x: MAC 08:00:08:1e:0f:44 Using smc911x-0 device TFTP from server 172.16.1.4; our IP address is 172.16.1.109 Filename '/srv/tftp/next/next-20130916/uImage.multi-snowball'. Load address: 0x100000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################ done Bytes transferred = 3568860 (3674dc hex) U8500 $ bootm 0x100000 bootm 0x100000 ## Booting kernel from Legacy Image at 00100000 ... Image Name: Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 3568796 Bytes = 3.4 MB Load Address: 00008000 Entry Point: 00008000 Loading Kernel Image ... OK OK Starting kernel ... ~$off

11 years, 3 months

queue boot: 6 passed 5 failed (queue/v3.10.12-1-gebe5c08)

by build＠lixom.net

arndale : passed 0:46.01 beaver : passed 0:31.52 cubie : FAILED 0:12.77 cubie2 : FAILED 0:41.40 cubox : passed 0:48.26 panda : passed 0:52.06 sama5 : passed 1:39.47 snowball : passed 1:37.46 multi-beaver : FAILED 0:41.11 multi-panda : FAILED 0:47.00 multi-snowball : FAILED 0:43.56 Last entries of failed logs below: ======================================================================== Board cubie failure log: ------------------------------------------------- io scheduler noop registered io scheduler deadline registered io scheduler cfq registered (default) sunxi-pinctrl 1c20800.pinctrl: initialized sunXi PIO driver ipmi message handler version 39.2 IPMI System Interface driver. ipmi_si: Adding default-specified kcs state machine ipmi_si: Trying default-specified kcs state machine at i/o address 0xca2, slave address 0x0, irq 0 ipmi_si: Could not set up I/O space Trying to free nonexistent resource <0000000000000ca2-0000000000000ca2> Trying to free nonexistent resource <0000000000000ca3-0000000000000ca3> ipmi_si: Adding default-specified smic state machine ipmi_si: Trying default-specified smic state machine at i/o address 0xca9, slave address 0x0, irq 0 ipmi_si: Could not set up I/O space Trying to free nonexistent resource <0000000000000ca9-0000000000000ca9> Trying to free nonexistent resource <0000000000000caa-0000000000000caa> Trying to free nonexistent resource <0000000000000cab-0000000000000cab> ipmi_si: Adding default-specified bt state machine ipmi_si: Trying default-specified bt state machine at i/o address 0xe4, slave address 0x0, irq 0 ipmi_si: Could not set up I/O space Trying to free nonexistent resource <00000000000000e4-00000000000000e4> Trying to free nonexistent resource <00000000000000e5-00000000000000e5> Trying to free nonexistent resource <00000000000000e6-00000000000000e6> ipmi_si: Unable to find any System Interface(s) Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled 1c28000.serial: ttyS0 at MMIO 0x1c28000 (irq = 17) is a U6_16550A console [ttyS0] enabled usbcore: registered new interface driver usb-storage mousedev: PS/2 mouse device common for all mice sdhci: Secure Digital Host Controller Interface driver sdhci: Copyright(c) Pierre Ossman sdhci-pltfm: SDHCI platform and OF driver helper usbcore: registered new interface driver usbhid usbhid: USB HID core driver VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 3 Registering SWP/SWPB emulation handler /home/build/work/batch/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) List of all partitions: No filesystem could mount root, tried: Kernel panic - not syncing: VFS: Unable to~$off ======================================================================== Board cubie2 failure log: ------------------------------------------------- loglevel=8 netmask=255.255.255.0 panicarg=panic=10 partition=0:1 scriptaddr=0x44000000 serverip=172.16.1.4 setargs=if test -z \\"$root\\"; then if test \\"$bootpath\\" = "boot/"; then root="/dev/mmcblk0p1 rootwait"; else root="/dev/mmcblk0p2 rootwait"; fi; fi; setenv bootargs console=${console} root=${root} loglevel=${loglevel} ${panicarg} ${extraargs} stderr=serial stdin=serial stdout=serial Environment size: 2098/131068 bytes sun7i#printenv bootargs printenv bootargs bootargs=console=ttyS0,115200n8 root=/dev/nfs rootwait rw nfsroot=172.16.1.7:/work/nfsroot/cubie2 ip=dhcp sun7i#tftpboot 0x41000000 172.16.1.4:/srv/tftp/queue/v3.10.12-1-gebe5c08/uImage.multi-1g tftpboot 0x41000000 172.16.1.4:/srv/tftp/queue/v3.10.12-1-gebe5c08/uImage.multi-1g Using emac device TFTP from server 172.16.1.4; our IP address is 172.16.1.107 Filename '/srv/tftp/queue/v3.10.12-1-gebe5c08/uImage.multi-1g'. Load address: 0x41000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ############################### 1.7 MiB/s done Bytes transferred = 1820224 (1bc640 hex) sun7i#tftpboot 0x42000000 172.16.1.4:/srv/tftp/queue/v3.10.12-1-gebe5c08/sun7i-a20-cubieboard2.dtb tftpboot 0x42000000 172.16.1.4:/srv/tftp/queue/v3.10.12-1-gebe5c08/sun7i-a20-cubieboard2.dtb Using emac device TFTP from server 172.16.1.4; our IP address is 172.16.1.107 Filename '/srv/tftp/queue/v3.10.12-1-gebe5c08/sun7i-a20-cubieboard2.dtb'. Load address: 0x42000000 Loading: * TFTP error: 'File not found' (1) Not retrying... sun7i#~$off ======================================================================== Board multi-beaver failure log: ------------------------------------------------- Using asx0 device TFTP from server 172.16.1.4; our IP address is 172.16.1.145 Filename '/srv/tftp/queue/v3.10.12-1-gebe5c08/uImage.multi-2g'. Load address: 0x82000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ############################### 1.9 MiB/s done Bytes transferred = 1820224 (1bc640 hex) Tegra30 (Beaver) # tftpboot 0x83000000 172.16.1.4:/srv/tftp/queue/v3.10.12-1-gebe5c08/tegra30-beaver.dtb tftpboot 0x83000000 172.16.1.4:/srv/tftp/queue/v3.10.12-1-gebe5c08/tegra30-beaver.dtb Using asx0 device TFTP from server 172.16.1.4; our IP address is 172.16.1.145 Filename '/srv/tftp/queue/v3.10.12-1-gebe5c08/tegra30-beaver.dtb'. Load address: 0x83000000 Loading: *#### 1.3 MiB/s done Bytes transferred = 16546 (40a2 hex) Tegra30 (Beaver) # bootm 0x82000000 - 0x83000000 bootm 0x82000000 - 0x83000000 ## Booting kernel from Legacy Image at 82000000 ... Image Name: Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 1820160 Bytes = 1.7 MiB Load Address: 80008000 Entry Point: 80008000 Verifying Checksum ... OK ## Flattened Device Tree blob at 83000000 Booting using the fdt blob at 0x83000000 Loading Kernel Image ... OK Loading Device Tree to 8fff8000, end 8ffff0a1 ... OK Starting kernel ... ~$off ======================================================================== Board multi-panda failure log: ------------------------------------------------- TFTP from server 172.16.1.4; our IP address is 172.16.1.182 Filename '/srv/tftp/queue/v3.10.12-1-gebe5c08/uImage.multi-2g'. Load address: 0x80000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ############################### done Bytes transferred = 1820224 (1bc640 hex) Panda # tftpboot 0x81000000 172.16.1.4:/srv/tftp/queue/v3.10.12-1-gebe5c08/omap4-panda-es.dtb tftpboot 0x81000000 172.16.1.4:/srv/tftp/queue/v3.10.12-1-gebe5c08/omap4-panda-es.dtb Waiting for Ethernet connection... done. Using sms0 device TFTP from server 172.16.1.4; our IP address is 172.16.1.182 Filename '/srv/tftp/queue/v3.10.12-1-gebe5c08/omap4-panda-es.dtb'. Load address: 0x81000000 Loading: *#### done Bytes transferred = 17271 (4377 hex) Panda # bootm 0x80000000 - 0x81000000 bootm 0x80000000 - 0x81000000 ## Booting kernel from Legacy Image at 80000000 ... Image Name: Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 1820160 Bytes = 1.7 MiB Load Address: 80008000 Entry Point: 80008000 Verifying Checksum ... OK ## Flattened Device Tree blob at 81000000 Booting using the fdt blob at 0x81000000 Loading Kernel Image ... OK OK reserving fdt memory region: addr=9d000000 size=3000000 Using Device Tree in place at 81000000, end 81007376 Starting kernel ... ~$off ======================================================================== Board multi-snowball failure log: ------------------------------------------------- ipaddr=172.16.1.109 serverip=172.16.1.7 bootfile=queue/v3.10.12-1-gebe5c08/uImage.multi-snowball autoboot=no Environment size: 1705/4092 bytes U8500 $ printenv bootargs printenv bootargs bootargs=console=ttyAMA2,115200 root=/dev/mmcblk0p4 rootwait rw debug earlyprintk U8500 $ tftpboot 0x100000 172.16.1.4:/srv/tftp/queue/v3.10.12-1-gebe5c08/uImage.multi-snowball tftpboot 0x100000 172.16.1.4:/srv/tftp/queue/v3.10.12-1-gebe5c08/uImage.multi-snowball smc911x: detected LAN9221 controller smc911x: phy initialized smc911x: MAC 08:00:08:1e:0f:44 Using smc911x-0 device TFTP from server 172.16.1.4; our IP address is 172.16.1.109 Filename '/srv/tftp/queue/v3.10.12-1-gebe5c08/uImage.multi-snowball'. Load address: 0x100000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ############################### done Bytes transferred = 1820224 (1bc640 hex) U8500 $ bootm 0x100000 bootm 0x100000 ## Booting kernel from Legacy Image at 00100000 ... Image Name: Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 1820160 Bytes = 1.7 MB Load Address: 00008000 Entry Point: 00008000 Loading Kernel Image ... OK OK Starting kernel ... ~$off

11 years, 3 months

queue build: 12 warnings 0 failures (queue/v3.10.12-1-gebe5c08)

by build＠lixom.net

Here are the build results from automated periodic testing: Topmost commit: ebe5c08 SCSI: Allow MPT Fusion SAS 3.0 driver to be built into the kernel Runtime: 37m 5s Passed: 121 Failed: 0 Warnings: 12 Section mismatches: 0 ------------------------------------------------------------------------------- Failed defconfigs: ------------------------------------------------------------------------------- Errors: Warnings: 1 arch/arm/mach-pxa/em-x270.c:480:18: warning: ignoring return value of 'regulator_enable', declared with attribute warn_unused_result [-Wunused-result] 1 arch/arm/mach-pxa/em-x270.c:484:18: warning: ignoring return value of 'regulator_enable', declared with attribute warn_unused_result [-Wunused-result] 1 arch/arm/mach-pxa/em-x270.c:603:19: warning: ignoring return value of 'regulator_enable', declared with attribute warn_unused_result [-Wunused-result] 1 buildall.arm.u300_defconfig.log.passed:include/config/auto.conf:257:warning: override: ARCH_MULTIPLATFORM changes choice state 1 drivers/clocksource/bcm_kona_timer.c:210:199: warning: comparison of distinct pointer types lacks a cast [enabled by default] 1 drivers/gpio/gpio-omap.c:1485:13: warning: 'omap_gpio_init_context' defined but not used [-Wunused-function] 1 drivers/spi/spi-pl022.c:2226:9: warning: format '%x' expects argument of type 'unsigned int', but argument 2 has type 'resource_size_t' [-Wformat=] 1 drivers/video/backlight/max8925_bl.c:177:3: warning: statement with no effect [-Wunused-value] 4 arch/arm/mm/init.c:603:2: warning: passing argument 1 of 'free_reserved_area' makes integer from pointer without a cast [enabled by default] 4 arch/arm/mm/init.c:603:2: warning: passing argument 2 of 'free_reserved_area' makes integer from pointer without a cast [enabled by default] 4 arch/arm/mm/init.c:731:2: warning: passing argument 1 of 'free_reserved_area' makes integer from pointer without a cast [enabled by default] 4 arch/arm/mm/init.c:731:2: warning: passing argument 2 of 'free_reserved_area' makes integer from pointer without a cast [enabled by default] Section mismatches:

11 years, 3 months

Jump to page:

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

Kernel-build-reports