Automated DT boot report for various ARM defconfigs.
Tree/Branch: arm-soc Git describe: v3.14-rc5-1214-gf08beab Failed boot tests (console logs at the end) =========================================== sun7i-a20-cubieboard2: FAIL: multi_lpae_defconfig sun7i-a20-cubieboard2: FAIL: sunxi_defconfig sun4i-a10-cubieboard: FAIL: sunxi_defconfig ste-snowball: FAIL: multi_v7_defconfig sun7i-a20-cubieboard2: FAIL: multi_v7_defconfig sun4i-a10-cubieboard: FAIL: multi_v7_defconfig bcm28155-ap: FAIL: multi_v7_defconfig legacy,dm365evm: FAIL: davinci_all_defconfig
Full Report ===========
omap2plus_defconfig ------------------- legacy,3730xm PASS: 0 min 51.8 sec am335x-boneblack PASS: 0 min 26.1 sec omap3-beagle-xm PASS: 1 min 1.8 sec legacy,3530beagle PASS: 1 min 23.0 sec omap4-panda PASS: 1 min 7.0 sec omap3-overo-tobi PASS: 0 min 23.7 sec am335x-bone PASS: 0 min 27.8 sec omap3-overo-storm-tobi PASS: 0 min 24.9 sec omap4-panda-es PASS: 1 min 14.5 sec legacy,3730storm PASS: 0 min 23.8 sec legacy,3530overo PASS: 0 min 21.7 sec
multi_lpae_defconfig -------------------- sun7i-a20-cubieboard2 FAIL: 0 min 20.1 sec
tegra_defconfig --------------- tegra30-beaver PASS: 0 min 17.0 sec
imx_v6_v7_defconfig ------------------- imx6dl-wandboard,wand-dual PASS: 0 min 19.1 sec imx6dl-wandboard,wand-solo PASS: 0 min 19.0 sec imx6q-wandboard PASS: 0 min 17.5 sec
sunxi_defconfig --------------- sun7i-a20-cubieboard2 FAIL: 0 min 18.1 sec sun4i-a10-cubieboard FAIL: 0 min 18.9 sec
bcm_defconfig ------------- bcm28155-ap PASS: 1 min 4.1 sec
mvebu_v7_defconfig ------------------ armada-xp-openblocks-ax3-4 PASS: 0 min 22.2 sec armada-370-mirabox PASS: 0 min 20.5 sec
exynos_defconfig ---------------- exynos5250-arndale PASS: 0 min 29.9 sec
multi_v7_defconfig ------------------ ste-snowball FAIL: 0 min 30.6 sec tegra30-beaver PASS: 0 min 17.0 sec am335x-boneblack PASS: 0 min 24.2 sec omap3-beagle-xm PASS: 0 min 50.0 sec sun7i-a20-cubieboard2 FAIL: 0 min 31.4 sec armada-370-mirabox PASS: 0 min 22.4 sec omap4-panda PASS: 0 min 52.7 sec armada-xp-openblocks-ax3-4 PASS: 0 min 25.1 sec sun4i-a10-cubieboard FAIL: 0 min 23.2 sec bcm28155-ap FAIL: 16 min 16.2 sec omap3-overo-tobi PASS: 0 min 22.5 sec imx6dl-wandboard,wand-solo PASS: 0 min 23.4 sec am335x-bone PASS: 0 min 26.9 sec omap3-overo-storm-tobi PASS: 0 min 24.7 sec imx6q-wandboard PASS: 0 min 17.3 sec omap4-panda-es PASS: 0 min 55.5 sec imx6dl-wandboard,wand-dual PASS: 0 min 19.0 sec
u8500_defconfig --------------- ste-snowball PASS: 0 min 30.0 sec
sama5_defconfig --------------- sama5d35ek PASS: 0 min 17.1 sec
davinci_all_defconfig --------------------- legacy,dm365evm FAIL: 0 min 31.6 sec
Console logs for failures =========================
multi_lpae_defconfig --------------------
sun7i-a20-cubieboard2: FAIL: last 80 lines of boot log: -------------------------------------------------------
setenv ethaddr 22:71:81:DA:53:EA sun7i# setenv bootargs console=ttyS0,115200 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 setenv bootargs console=ttyS0,115200 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 sun7i# setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none' setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none' sun7i# setenv initrd_high 0xffffffff setenv initrd_high 0xffffffff sun7i# if test -n ${initenv}; then run initenv; fi if test -n ${initenv}; then run initenv; fi sun7i# if test -n ${preboot}; then run preboot; fi if test -n ${preboot}; then run preboot; fi sun7i# setenv autoload no; setenv autoboot no setenv autoload no; setenv autoboot no sun7i# dhcp dhcp ENET Speed is 100 Mbps - FULL duplex connection BOOTP broadcast 1 DHCP client bound to address 192.168.1.153 sun7i# setenv serverip 192.168.1.2 setenv serverip 192.168.1.2 sun7i# if test -n ${netargs}; then run netargs; fi if test -n ${netargs}; then run netargs; fi sun7i# tftp 0x40008000 192.168.1.2:tmp/cubie2-bzsFdC/zImage tftp 0x40008000 192.168.1.2:tmp/cubie2-bzsFdC/zImage Using emac device TFTP from server 192.168.1.2; our IP address is 192.168.1.153 Filename 'tmp/cubie2-bzsFdC/zImage'. Load address: 0x40008000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# #################################################### 2.7 MiB/s done Bytes transferred = 4565680 (45aab0 hex) sun7i# tftp 0x42000000 192.168.1.2:buildroot.cpio.gz.uboot tftp 0x42000000 192.168.1.2:buildroot.cpio.gz.uboot Using emac device TFTP from server 192.168.1.2; our IP address is 192.168.1.153 Filename 'buildroot.cpio.gz.uboot'. Load address: 0x42000000 Loading: *############################################ 2.7 MiB/s done Bytes transferred = 642602 (9ce2a hex) sun7i# tftp 0x41000000 192.168.1.2:tmp/cubie2-bzsFdC/sun7i-a20-cubieboard2.dtb tftp 0x41000000 192.168.1.2:tmp/cubie2-bzsFdC/sun7i-a20-cubieboard2.dtb Using emac device TFTP from server 192.168.1.2; our IP address is 192.168.1.153 Filename 'tmp/cubie2-bzsFdC/sun7i-a20-cubieboard2.dtb'. Load address: 0x41000000 Loading: *## 2.2 MiB/s done Bytes transferred = 18205 (471d hex) sun7i# printenv bootargs printenv bootargs bootargs=console=ttyS0,115200 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.153:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none sun7i# bootz 0x40008000 0x42000000 0x41000000 bootz 0x40008000 0x42000000 0x41000000 Kernel image @ 0x40008000 [ 0x000000 - 0x45aab0 ] ## Loading init Ramdisk from Legacy Image at 42000000 ... Image Name: Created: 2014-02-07 19:37:29 UTC Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 642538 Bytes = 627.5 KiB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK ## Flattened Device Tree blob at 41000000 Booting using the fdt blob at 0x41000000 Loading Device Tree to 40ff8000, end 40fff71c ... OK
Starting kernel ...
~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 20.07 seconds. # PYBOOT: Result: FAIL
sunxi_defconfig ---------------
sun7i-a20-cubieboard2: FAIL: last 80 lines of boot log: -------------------------------------------------------
arm-linux-gnueabi-gcc (Ubuntu/Linaro 4.7.2-1ubuntu1) 4.7.2 GNU ld (GNU Binutils for Ubuntu) 2.22.90.20120919 sun7i# setenv ethaddr 22:71:81:DA:53:EA setenv ethaddr 22:71:81:DA:53:EA sun7i# setenv bootargs console=ttyS0,115200 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 setenv bootargs console=ttyS0,115200 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 sun7i# setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none' setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none' sun7i# setenv initrd_high 0xffffffff setenv initrd_high 0xffffffff sun7i# if test -n ${initenv}; then run initenv; fi if test -n ${initenv}; then run initenv; fi sun7i# if test -n ${preboot}; then run preboot; fi if test -n ${preboot}; then run preboot; fi sun7i# setenv autoload no; setenv autoboot no setenv autoload no; setenv autoboot no sun7i#dhcp dhcp ENET Speed is 100 Mbps - FULL duplex connection BOOTP broadcast 1 DHCP client bound to address 192.168.1.153 sun7i# setenv serverip 192.168.1.2 setenv serverip 192.168.1.2 sun7i# if test -n ${netargs}; then run netargs; fi if test -n ${netargs}; then run netargs; fi sun7i# tftp 0x40008000 192.168.1.2:tmp/cubie2-ZYvpkm/zImage tftp 0x40008000 192.168.1.2:tmp/cubie2-ZYvpkm/zImage Using emac device TFTP from server 192.168.1.2; our IP address is 192.168.1.153 Filename 'tmp/cubie2-ZYvpkm/zImage'. Load address: 0x40008000 Loading: *################################################################# ######################################################### 2.7 MiB/s done Bytes transferred = 1780312 (1b2a58 hex) sun7i# tftp 0x42000000 192.168.1.2:buildroot.cpio.gz.uboot tftp 0x42000000 192.168.1.2:buildroot.cpio.gz.uboot Using emac device TFTP from server 192.168.1.2; our IP address is 192.168.1.153 Filename 'buildroot.cpio.gz.uboot'. Load address: 0x42000000 Loading: *############################################ 2.7 MiB/s done Bytes transferred = 642602 (9ce2a hex) sun7i# tftp 0x41000000 192.168.1.2:tmp/cubie2-ZYvpkm/sun7i-a20-cubieboard2.dtb tftp 0x41000000 192.168.1.2:tmp/cubie2-ZYvpkm/sun7i-a20-cubieboard2.dtb Using emac device TFTP from server 192.168.1.2; our IP address is 192.168.1.153 Filename 'tmp/cubie2-ZYvpkm/sun7i-a20-cubieboard2.dtb'. Load address: 0x41000000 Loading: *## 2.2 MiB/s done Bytes transferred = 18205 (471d hex) sun7i# printenv bootargs printenv bootargs bootargs=console=ttyS0,115200 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.153:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none sun7i# bootz 0x40008000 0x42000000 0x41000000 bootz 0x40008000 0x42000000 0x41000000 Kernel image @ 0x40008000 [ 0x000000 - 0x1b2a58 ] ## Loading init Ramdisk from Legacy Image at 42000000 ... Image Name: Created: 2014-02-07 19:37:29 UTC Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 642538 Bytes = 627.5 KiB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK ## Flattened Device Tree blob at 41000000 Booting using the fdt blob at 0x41000000 Loading Device Tree to 40ff8000, end 40fff71c ... OK
Starting kernel ...
~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 18.11 seconds. # PYBOOT: Result: FAIL
sun4i-a10-cubieboard: FAIL: last 80 lines of boot log: ------------------------------------------------------
arm-linux-gnueabi-gcc (Ubuntu/Linaro 4.7.2-1ubuntu1) 4.7.2 GNU ld (GNU Binutils for Ubuntu) 2.22.90.20120919 sun4i# setenv ethaddr 2e:40:70:f0:12:08 setenv ethaddr 2e:40:70:f0:12:08 sun4i# setenv bootargs console=ttyS0,115200 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 setenv bootargs console=ttyS0,115200 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 sun4i# setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none' setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none' sun4i# setenv initrd_high 0xffffffff setenv initrd_high 0xffffffff sun4i# if test -n ${initenv}; then run initenv; fi if test -n ${initenv}; then run initenv; fi sun4i# if test -n ${preboot}; then run preboot; fi if test -n ${preboot}; then run preboot; fi sun4i#setenv autoload no; setenv autoboot no setenv autoload no; setenv autoboot no sun4i# dhcp dhcp ENET Speed is 100 Mbps - FULL duplex connection BOOTP broadcast 1 DHCP client bound to address 192.168.1.193 sun4i# setenv serverip 192.168.1.2 setenv serverip 192.168.1.2 sun4i# if test -n ${netargs}; then run netargs; fi if test -n ${netargs}; then run netargs; fi sun4i# tftp 0x40008000 192.168.1.2:tmp/cubie-N7m_Gy/zImage tftp 0x40008000 192.168.1.2:tmp/cubie-N7m_Gy/zImage Using emac device TFTP from server 192.168.1.2; our IP address is 192.168.1.193 Filename 'tmp/cubie-N7m_Gy/zImage'. Load address: 0x40008000 Loading: *################################################################# ######################################################### 2.7 MiB/s done Bytes transferred = 1780312 (1b2a58 hex) sun4i# tftp 0x42000000 192.168.1.2:buildroot.cpio.gz.uboot tftp 0x42000000 192.168.1.2:buildroot.cpio.gz.uboot Using emac device TFTP from server 192.168.1.2; our IP address is 192.168.1.193 Filename 'buildroot.cpio.gz.uboot'. Load address: 0x42000000 Loading: *############################################ 2.7 MiB/s done Bytes transferred = 642602 (9ce2a hex) sun4i# tftp 0x41000000 192.168.1.2:tmp/cubie-N7m_Gy/sun4i-a10-cubieboard.dtb tftp 0x41000000 192.168.1.2:tmp/cubie-N7m_Gy/sun4i-a10-cubieboard.dtb Using emac device TFTP from server 192.168.1.2; our IP address is 192.168.1.193 Filename 'tmp/cubie-N7m_Gy/sun4i-a10-cubieboard.dtb'. Load address: 0x41000000 Loading: *## 2.4 MiB/s done Bytes transferred = 15168 (3b40 hex) sun4i# printenv bootargs printenv bootargs bootargs=console=ttyS0,115200 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.193:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none sun4i# bootz 0x40008000 0x42000000 0x41000000 bootz 0x40008000 0x42000000 0x41000000 Kernel image @ 0x40008000 [ 0x000000 - 0x1b2a58 ] ## Loading init Ramdisk from Legacy Image at 42000000 ... Image Name: Created: 2014-02-07 19:37:29 UTC Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 642538 Bytes = 627.5 KiB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK ## Flattened Device Tree blob at 41000000 Booting using the fdt blob at 0x41000000 Loading Device Tree to 40ff9000, end 40fffb3f ... OK
Starting kernel ...
~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 18.95 seconds. # PYBOOT: Result: FAIL
multi_v7_defconfig ------------------
ste-snowball: FAIL: last 80 lines of boot log: ----------------------------------------------
U-Boot 2009.11 (sept. 19 2011 - 17:03:11)
CPU: ST-Ericsson db8500 v2 (Dual ARM Cortex A9) 998.400 Mhz I2C: ready DRAM: 1 GB MMC: MCDE: startup failed sec_bridge: ISSWAPI_FLUSH_BOOT_CODE: 2 EMMC: 0, MMC: 1 In: serial Out: serial Err: serial Net: smc911x-0 Hit any key to stop autoboot: 1 0 U8500 $ U8500 $ version version
U-Boot 2009.11 (sept. 19 2011 - 17:03:11) U8500 $ setenv ethaddr 6e:e6:84:36:8e:9e setenv ethaddr 6e:e6:84:36:8e:9e Can't overwrite "ethaddr" U8500 $ setenv bootargs console=ttyAMA2,115200n8 debug earlyprintk rw root=/dev/mmcblk0p3 rootwait rootfstype=ext4 setenv bootargs console=ttyAMA2,115200n8 debug earlyprintk rw root=/dev/mmcblk0p3 rootwait rootfstype=ext4 U8500 $ setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none' setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none' U8500 $ if test -n ${initenv}; then run initenv; fi if test -n ${initenv}; then run initenv; fi U8500 $ if test -n ${preboot}; then run preboot; fi if test -n ${preboot}; then run preboot; fi U8500 $ setenv autoload no; setenv autoboot no setenv autoload no; setenv autoboot no U8500 $ dhcp dhcp smc911x: detected LAN9221 controller smc911x: phy initialized smc911x: MAC 6e:e6:84:36:8e:9e BOOTP broadcast 1 DHCP client bound to address 192.168.1.159 U8500 $ setenv serverip 192.168.1.2 setenv serverip 192.168.1.2 U8500 $ if test -n ${netargs}; then run netargs; fi if test -n ${netargs}; then run netargs; fi U8500 $ tftp 0x00800000 192.168.1.2:tmp/snowball-WscmGH/tmpHpYFIO-uImage tftp 0x00800000 192.168.1.2:tmp/snowball-WscmGH/tmpHpYFIO-uImage smc911x: detected LAN9221 controller smc911x: phy initialized smc911x: MAC 6e:e6:84:36:8e:9e Using smc911x-0 device TFTP from server 192.168.1.2; our IP address is 192.168.1.159 Filename 'tmp/snowball-WscmGH/tmpHpYFIO-uImage'. Load address: 0x800000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ##################################################### done Bytes transferred = 4580665 (45e539 hex) U8500 $ printenv bootargs printenv bootargs bootargs=console=ttyAMA2,115200n8 debug earlyprintk rw root=/dev/mmcblk0p3 rootwait rootfstype=ext4 ip=192.168.1.159:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none U8500 $ bootm 0x00800000 bootm 0x00800000 ## Booting kernel from Legacy Image at 00800000 ... Image Name: Linux Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 4580601 Bytes = 4.4 MB Load Address: 00008000 Entry Point: 00008000 Loading Kernel Image ... OK OK
Starting kernel ...
~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 30.58 seconds. # PYBOOT: Result: FAIL
sun7i-a20-cubieboard2: FAIL: last 80 lines of boot log: -------------------------------------------------------
Connected to cubie2 console [channel connected] (~$quit to exit) (user:khilman) is already connected
~$hardreset
Command(cubie2 console)> hardreset (user:khilman) Reboot cubie2 Reboot: cubie2 ; phidget 3 0 : off, sleep, on 0 sun7i# ~$off # PYBOOT: Exception: ERROR: Could not break into autoboot. # PYBOOT: Time: 31.39 seconds. # PYBOOT: Result: FAIL
sun4i-a10-cubieboard: FAIL: last 80 lines of boot log: ------------------------------------------------------
sun4i# setenv bootargs console=ttyS0,115200 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 setenv bootargs console=ttyS0,115200 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 sun4i# setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none' setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none' sun4i# setenv initrd_high 0xffffffff setenv initrd_high 0xffffffff sun4i#if test -n ${initenv}; then run initenv; fi if test -n ${initenv}; then run initenv; fi sun4i# if test -n ${preboot}; then run preboot; fi if test -n ${preboot}; then run preboot; fi sun4i# setenv autoload no; setenv autoboot no setenv autoload no; setenv autoboot no sun4i# dhcp dhcp ENET Speed is 100 Mbps - FULL duplex connection BOOTP broadcast 1 BOOTP broadcast 2 DHCP client bound to address 192.168.1.193 sun4i# setenv serverip 192.168.1.2 setenv serverip 192.168.1.2 sun4i# if test -n ${netargs}; then run netargs; fi if test -n ${netargs}; then run netargs; fi sun4i# tftp 0x40008000 192.168.1.2:tmp/cubie-Q6gJ6K/zImage tftp 0x40008000 192.168.1.2:tmp/cubie-Q6gJ6K/zImage Using emac device TFTP from server 192.168.1.2; our IP address is 192.168.1.193 Filename 'tmp/cubie-Q6gJ6K/zImage'. Load address: 0x40008000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################## 2.7 MiB/s done Bytes transferred = 4539352 (4543d8 hex) sun4i# tftp 0x42000000 192.168.1.2:buildroot.cpio.gz.uboot tftp 0x42000000 192.168.1.2:buildroot.cpio.gz.uboot Using emac device TFTP from server 192.168.1.2; our IP address is 192.168.1.193 Filename 'buildroot.cpio.gz.uboot'. Load address: 0x42000000 Loading: *############################################ 2.7 MiB/s done Bytes transferred = 642602 (9ce2a hex) sun4i# tftp 0x41000000 192.168.1.2:tmp/cubie-Q6gJ6K/sun4i-a10-cubieboard.dtb tftp 0x41000000 192.168.1.2:tmp/cubie-Q6gJ6K/sun4i-a10-cubieboard.dtb Using emac device TFTP from server 192.168.1.2; our IP address is 192.168.1.193 Filename 'tmp/cubie-Q6gJ6K/sun4i-a10-cubieboard.dtb'. Load address: 0x41000000 Loading: *## 2.1 MiB/s done Bytes transferred = 15168 (3b40 hex) sun4i# printenv bootargs printenv bootargs bootargs=console=ttyS0,115200 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.193:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none sun4i# bootz 0x40008000 0x42000000 0x41000000 bootz 0x40008000 0x42000000 0x41000000 Kernel image @ 0x40008000 [ 0x000000 - 0x4543d8 ] ## Loading init Ramdisk from Legacy Image at 42000000 ... Image Name: Created: 2014-02-07 19:37:29 UTC Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 642538 Bytes = 627.5 KiB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK ## Flattened Device Tree blob at 41000000 Booting using the fdt blob at 0x41000000 Loading Device Tree to 40ff9000, end 40fffb3f ... OK
Starting kernel ...
~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 23.21 seconds. # PYBOOT: Result: FAIL
bcm28155-ap: FAIL: last 80 lines of boot log: ---------------------------------------------
[ 1.020000] devtmpfs: mounted [ 1.030000] Freeing unused kernel memory: 532K (c0a3e000 - c0ac3000) [ 1.060000] Internal error: Oops - undefined instruction: 0 [#1] SMP ARM <LAVA_DISPATCHER>2014-03-21 07:44:36 PM WARNING: Sending newline in case of corruption. <LAVA_DISPATCHER>2014-03-21 07:45:06 PM WARNING: Sending newline in case of corruption. <LAVA_DISPATCHER>2014-03-21 07:45:36 PM WARNING: Sending newline in case of corruption. <LAVA_DISPATCHER>2014-03-21 07:46:07 PM WARNING: Sending newline in case of corruption. <LAVA_DISPATCHER>2014-03-21 07:46:37 PM WARNING: Sending newline in case of corruption. <LAVA_DISPATCHER>2014-03-21 07:47:07 PM WARNING: Sending newline in case of corruption. <LAVA_DISPATCHER>2014-03-21 07:47:37 PM INFO: Boot linaro image failed: Timeout exceeded in read_nonblocking(). <lava_dispatcher.utils.logging_spawn object at 0xa16b02c> version: 2.4 ($Revision: 516 $) command: /usr/bin/conmux-console args: [u'/usr/bin/conmux-console', u'vence/capri'] searcher: searcher_re: 0: re.compile("root@bcm-capri-board:~#") buffer (last 100 chars): 0a3e000 - c0ac3000) [ 1.060000] Internal error: Oops - undefined instruction: 0 [#1] SMP ARM
before (last 100 chars): 0a3e000 - c0ac3000) [ 1.060000] Internal error: Oops - undefined instruction: 0 [#1] SMP ARM
after: <class 'pexpect.TIMEOUT'> match: None match_index: None exitstatus: None flag_eof: False pid: 6386 child_fd: 3 closed: False timeout: 1200 delimiter: <class 'pexpect.EOF'> logfile: None logfile_read: <lava_dispatcher.context.Flusher object at 0x9a9860c> logfile_send: None maxread: 2000 ignorecase: False searchwindowsize: None delaybeforesend: 0.05 delayafterclose: 0.1 delayafterterminate: 0.1 <LAVA_DISPATCHER>2014-03-21 07:47:37 PM INFO: Booting the test image. Attempt: 2 < waiting for device > <LAVA_DISPATCHER>2014-03-21 07:47:39 PM INFO: Perform hard reset on the system Reboot: capri ; ip9258 1 3 : off, sleep, on < waiting for device > <LAVA_DISPATCHER>2014-03-21 07:57:41 PM ERROR: boot_linaro_image failed Traceback (most recent call last): File "/home/khilman/work.local/lava/lava-dispatcher/lava_dispatcher/actions/boot_control.py", line 105, in run client.boot_linaro_image() File "/home/khilman/work.local/lava/lava-dispatcher/lava_dispatcher/client/base.py", line 508, in boot_linaro_image self._boot_linaro_image() File "/home/khilman/work.local/lava/lava-dispatcher/lava_dispatcher/client/base.py", line 481, in _boot_linaro_image self.proc = self.target_device.power_on() File "/home/khilman/work.local/lava/lava-dispatcher/lava_dispatcher/device/capri.py", line 114, in power_on self.fastboot('reboot') File "/home/khilman/work.local/lava/lava-dispatcher/lava_dispatcher/device/fastboot.py", line 57, in __call__ _call(self.context, command, ignore_failure, timeout) File "/home/khilman/work.local/lava/lava-dispatcher/lava_dispatcher/device/fastboot.py", line 45, in _call context.run_command(cmd, failok=ignore_failure) File "/home/khilman/work.local/lava/lava-dispatcher/lava_dispatcher/context.py", line 153, in run_command rc = subprocess.check_call(command, **output_args) File "/usr/lib/python2.7/subprocess.py", line 511, in check_call raise CalledProcessError(retcode, cmd) CalledProcessError: Command '['nice', 'sh', '-c', u'timeout 600s flock /var/lock/lava-fastboot.lck fastboot -s 1234567890 reboot']' returned non-zero exit status 124 <LAVA_DISPATCHER>2014-03-21 07:57:41 PM INFO: CriticalError <LAVA_DISPATCHER>2014-03-21 07:57:41 PM WARNING: [ACTION-E] boot_linaro_image is finished with error (Failed to boot test image.). ErrorMessage: Failed to boot test image. Lava failed at action boot_linaro_image with error:Failed to boot test image. Traceback (most recent call last): File "/home/khilman/work.local/lava/lava-dispatcher/lava_dispatcher/job.py", line 270, in run action.run(**params) File "/home/khilman/work.local/lava/lava-dispatcher/lava_dispatcher/actions/boot_control.py", line 109, in run raise CriticalError("Failed to boot test image.") CriticalError: Failed to boot test image. Reboot: capri ; ip9258 1 3 : ['off'] <LAVA_DISPATCHER>2014-03-21 07:57:42 PM INFO: Submitting the test result with parameters = {u'token': '<HIDDEN>', u'stream': u'/anonymous/lboot/', u'server': u'http://khilman@lava.lan/RPC2/%27%7D <LAVA_DISPATCHER>2014-03-21 07:57:42 PM INFO: Dashboard : http://lava.lan/dashboard/permalink/bundle/589e215cd844b26ee3c8b892db0609d6d... LBOOT: Result: FAIL LBOOT: Time: 976.18 seconds.
davinci_all_defconfig ---------------------
legacy,dm365evm: FAIL: last 80 lines of boot log: -------------------------------------------------
Connected to dm365evm console [channel connected] (~$quit to exit) (user:khilman) is already connected
~$hardreset
Command(dm365evm console)> hardreset (user:khilman) Reboot dm365evm Reboot: dm365evm ; phidget 4 1 : ('off', 4, 'on') , sleep 4, ~$off # PYBOOT: Exception: ERROR: Could not break into autoboot. # PYBOOT: Time: 31.60 seconds. # PYBOOT: Result: FAIL