Failed boards:
bbb multi_v7_defconfig : FAILED 1:19.50 hummingboard multi_v7_defconfig : FAILED 0:25.50 panda multi_v7_defconfig : FAILED 1:33.77
Successful boards:
apc vt8500_v6_v7_defconfig : passed 1:14.39 arndale exynos_defconfig : passed 1:08.19 bbb omap2plus_defconfig : passed 1:37.09 beaver tegra_defconfig : passed 0:54.77 beaver multi_v7_defconfig : warnings 0:49.58 capri bcm_defconfig : passed 0:44.43 capri multi_v7_defconfig : passed 0:43.68 cubie sunxi_defconfig : passed 0:52.86 cubie multi_v7_defconfig : passed 0:58.63 cubie2 sunxi_defconfig : passed 0:50.24 cubie2 multi_v7_defconfig : warnings 0:58.13 cubie2 multi_lpae_defconfig : warnings 0:50.72 cubox dove_defconfig : passed 1:03.66 dalmore tegra_defconfig : passed 1:25.99 dalmore multi_v7_defconfig : warnings 1:18.90 dalmore multi_lpae_defconfig : warnings 1:22.81 hummingboard imx_v6_v7_defconfig : passed 1:16.35 panda omap2plus_defconfig : passed 1:15.49 sama5 sama5_defconfig : passed 1:53.31 seaboard tegra_defconfig : passed 1:03.96 seaboard multi_v7_defconfig : warnings 1:09.47 snow exynos_defconfig : passed 1:19.38 snowball u8500_defconfig : passed 1:21.61 snowball multi_v7_defconfig : passed 2:09.61 trimslice tegra_defconfig : passed 0:58.66 trimslice multi_v7_defconfig : warnings 0:57.08 wandboard imx_v6_v7_defconfig : passed 0:56.75 wandboard multi_v7_defconfig : warnings 1:11.80
Board legend is available at http://arm-soc.lixom.net/boards.html
Last entries of failed logs below:
========================================================================
Board bbb-multi_v7_defconfig failure log: -------------------------------------------------
Using cpsw device TFTP from server 172.16.1.3; our IP address is 172.16.1.112 Filename 'next/next-20131224/multi_v7_defconfig/zImage'. Load address: 0x80200000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ########################### 1.2 MiB/s done Bytes transferred = 4202112 (401e80 hex) U-Boot# setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 U-Boot# tftp 0x81f00000 next/next-20131224/multi_v7_defconfig/dtbs/am335x-boneblack.dtb tftp 0x81f00000 next/next-20131224/multi_v7_defconfig/dtbs/am335x-boneblack.dtb link up on port 0, speed 100, full duplex Using cpsw device TFTP from server 172.16.1.3; our IP address is 172.16.1.112 Filename 'next/next-20131224/multi_v7_defconfig/dtbs/am335x-boneblack.dtb'. Load address: 0x81f00000 Loading: *## 1 MiB/s done Bytes transferred = 17911 (45f7 hex) U-Boot# setenv bootargs console=ttyO0,115200 root=/dev/mmcblk0p2 rootwait rw debug earlyprintk setenv bootargs console=ttyO0,115200 root=/dev/mmcblk0p2 rootwait rw debug earlyprintk U-Boot# printenv bootargs printenv bootargs bootargs=console=ttyO0,115200 root=/dev/mmcblk0p2 rootwait rw debug earlyprintk U-Boot# bootz 0x80200000 - 0x81f00000 bootz 0x80200000 - 0x81f00000 ## Flattened Device Tree blob at 81f00000 Booting using the fdt blob at 0x81f00000 Using Device Tree in place at 81f00000, end 81f075f6
Starting kernel ...
~$off # PYBOOT: Exception: timeout
========================================================================
Board hummingboard-multi_v7_defconfig failure log: -------------------------------------------------
[ 1.084154] ci_hdrc ci_hdrc.0: USB 2.0 started, EHCI 1.00 [ 1.090196] hub 1-0:1.0: USB hub found [ 1.093979] hub 1-0:1.0: 1 port detected [ 1.098501] ci_hdrc ci_hdrc.1: doesn't support gadget [ 1.103570] ci_hdrc ci_hdrc.1: EHCI Host Controller [ 1.108492] ci_hdrc ci_hdrc.1: new USB bus registered, assigned bus number 2 [ 1.134151] ci_hdrc ci_hdrc.1: USB 2.0 started, EHCI 1.00 [ 1.140144] hub 2-0:1.0: USB hub found [ 1.143925] hub 2-0:1.0: 1 port detected [ 1.148457] mousedev: PS/2 mouse device common for all mice [ 1.155428] i2c /dev entries driver [ 1.159887] sdhci: Secure Digital Host Controller Interface driver [ 1.166095] sdhci: Copyright(c) Pierre Ossman [ 1.170834] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.177014] sdhci-esdhc-imx 2194000.usdhc: could not get ultra high speed state, work on normal mode [ 1.186189] mmc0: no vqmmc regulator found [ 1.234144] mmc0: SDHCI controller on 2194000.usdhc [2194000.usdhc] using ADMA [ 1.242033] usbcore: registered new interface driver usbhid [ 1.247638] usbhid: USB HID core driver [ 1.256409] TCP: cubic registered [ 1.259739] NET: Registered protocol family 17 [ 1.264372] Key type dns_resolver registered [ 1.269513] /home/build/work/batch/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 1.277816] spear_cpufreq: Invalid cpufreq_tbl [ 1.282248] ALSA device list: [ 1.285425] No soundcards found. [ 1.289334] VFS: Cannot open root device "mmcblk0p2" or unknown-block(0,0): error -6 [ 1.297101] Please append a correct "root=" boot option; here are the available partitions: [ 1.305471] Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(0,0) [ 1.313743] CPU: 0 PID: 1 Comm: swapper Tainted: G W 3.13.0-rc5-next-20131224 #1 [ 1.322037] [<c0013c50>] (unwind_backtrace) from [<c0010f0c>] (show_stack+0x10/0x14) [ 1.329794] [<c0010f0c>] (show_stack) from [<c05373a4>] (panic+0x8c/0x1d8) [ 1.336687] [<c05373a4>] (panic) from [<c07aaf74>] (mount_block_root+0x1a0/0x230) [ 1.344180] [<c07aaf74>] (mount_block_root) from [<c07ab10c>] (mount_root+0x108/0x110) [ 1.352105] [<c07ab10c>] (mount_root) from [<c07ab26c>] (prepare_namespace+0x158/0x1a0) [ 1.360121] [<c07ab26c>] (prepare_namespace) from [<c07aac30>] (kernel_init_freeable+0x1b4/0x1c4) [ 1.369009] [<c07aac30>] (kernel_init_freeable) from [<c0535068>] (kernel_init+0x8/0x120) [ 1.377197] [<c0535068>] (kernel_init) from [<c000e3d8>] (ret_from_fork+0x14/0x3c) ~$off # PYBOOT: Exception: panic
========================================================================
Board panda-multi_v7_defconfig failure log: -------------------------------------------------
[ 2.040679] platform 48072000.i2c: Driver omap_i2c requests probe deferral [ 2.048095] omap_i2c 48060000.i2c: could not find pctldev for node /ocp/pinmux@4a100040/pinmux_i2c3_pins, deferring probe [ 2.059570] platform 48060000.i2c: Driver omap_i2c requests probe deferral [ 2.066833] omap_i2c 48350000.i2c: could not find pctldev for node /ocp/pinmux@4a100040/pinmux_i2c4_pins, deferring probe [ 2.078430] platform 48350000.i2c: Driver omap_i2c requests probe deferral [ 2.085998] omap-dma-engine 4a056000.dma-controller: allocating channel for 62 [ 2.085998] omap-dma-engine 4a056000.dma-controller: allocating channel for 61 [ 2.101226] omap_hsmmc 4809c000.mmc: vmmc regulator missing [ 2.107086] omap-dma-engine 4a056000.dma-controller: freeing channel for 61 [ 2.114379] omap-dma-engine 4a056000.dma-controller: freeing channel for 62 [ 2.121673] platform 4809c000.mmc: Driver omap_hsmmc requests probe deferral [ 2.129119] omap_hsmmc 480d5000.mmc: could not find pctldev for node /ocp/pinmux@4a100040/pinmux_wl12xx_pins, deferring probe [ 2.141113] platform 480d5000.mmc: Driver omap_hsmmc requests probe deferral [ 2.148559] leds-gpio leds.6: could not find pctldev for node /ocp/pinmux@4a100040/gpio_led_pmx, deferring probe [ 2.159362] platform leds.6: Driver leds-gpio requests probe deferral [ 2.412353] usb 1-1.1: new high-speed USB device number 3 using ehci-omap [ 2.547973] smsc95xx v1.0.4 [ 2.612487] smsc95xx 1-1.1:1.0 eth0: register 'smsc95xx' at usb-4a064c00.ehci-1.1, smsc95xx USB 2.0 Ethernet, ba:2a:7f:2d:e1:1e [ 2.624603] reg-fixed-voltage wl12xx_vmmc.10: could not find pctldev for node /ocp/pinmux@4a100040/pinmux_wl12xx_gpio, deferring probe [ 2.637359] platform wl12xx_vmmc.10: Driver reg-fixed-voltage requests probe deferral [ 2.645660] omap_i2c 48070000.i2c: could not find pctldev for node /ocp/pinmux@4a100040/pinmux_i2c1_pins, deferring probe [ 2.657348] platform 48070000.i2c: Driver omap_i2c requests probe deferral [ 2.664611] omap_i2c 48072000.i2c: could not find pctldev for node /ocp/pinmux@4a100040/pinmux_i2c2_pins, deferring probe [ 2.676239] platform 48072000.i2c: Driver omap_i2c requests probe deferral [ 2.683624] omap_i2c 48060000.i2c: could not find pctldev for node /ocp/pinmux@4a100040/pinmux_i2c3_pins, deferring probe [ 2.695098] platform 48060000.i2c: Driver omap_i2c requests probe deferral [ 2.702484] omap_i2c 48350000.i2c: could not find pctldev for node /ocp/pinmux@4a100040/pinmux_i2c4_pins, deferring probe [ 2.713958] platform 48350000.i2c: Driver omap_i2c requests probe deferral [ 2.721527] omap-dma-engine 4a056000.dma-controller: allocating channel for 62 [ 2.729156] omap-dma-engine 4a056000.dma-controller: allocating channel for 61 [ 2.736755] omap_hsmmc 4809c000.mmc: vmmc regulator missing [ 2.742584] omap-dma-engine 4a056000.dma-controller: freeing channel for 61 [ 2.749877] omap-dma-engine 4a056000.dma-controller: freeing channel for 62 [ 2.757202] platform 4809c000.mmc: Driver omap_hsmmc requests probe deferral [ 2.764801] omap_hsmmc 480d5000.mmc: could not find pctldev for node /ocp/pinmux@4a100040/pinmux_wl12xx_pins, deferring probe [ 2.776641] platform 480d5000.mmc: Driver omap_hsmmc requests probe deferral [ 2.776672] leds-gpio leds.6: could not find pctldev for node /ocp/pinmux@4a100040/gpio_led_pmx, deferring probe [ 2.794860] platform leds.6: Driver leds-gpio requests probe deferral ~$off # PYBOOT: Exception: timeout