Automated DT boot report for various ARM defconfigs.
Tree/Branch: next Git describe: next-20140117 Failed boot tests (console logs at the end) =========================================== exynos5250-arndale: FAIL: exynos_defconfig omap4-panda-es: FAIL: multi_v7_defconfig
Full Report ===========
omap2plus_defconfig ------------------- am335x-boneblack PASS: 0 min 25.2 sec omap3-beagle-xm PASS: 0 min 56.0 sec am335x-bone PASS: 0 min 26.8 sec omap4-panda PASS: 1 min 3.9 sec omap4-panda-es PASS: 1 min 6.6 sec omap3-tobi,3730storm PASS: 0 min 21.0 sec omap3-tobi,3530overo PASS: 0 min 22.2 sec
imx_v6_v7_defconfig ------------------- imx6dl-wandboard,wand-dual PASS: 0 min 17.2 sec imx6dl-wandboard,wand-solo PASS: 0 min 17.0 sec imx6q-wandboard PASS: 0 min 15.7 sec
sunxi_defconfig --------------- sun7i-a20-cubieboard2 PASS: 0 min 12.3 sec
exynos_defconfig ---------------- exynos5250-arndale FAIL: 1 min 30.0 sec
multi_v7_defconfig ------------------ ste-snowball PASS: 1 min 16.9 sec tegra30-beaver PASS: 0 min 23.5 sec am335x-boneblack PASS: 0 min 22.8 sec omap3-beagle-xm PASS: 0 min 49.4 sec sun7i-a20-cubieboard2 PASS: 0 min 13.7 sec armada-370-mirabox PASS: 0 min 21.4 sec omap4-panda PASS: 0 min 54.8 sec omap4-panda-es FAIL: 1 min 44.7 sec armada-xp-openblocks-ax3-4 PASS: 0 min 24.0 sec imx6dl-wandboard,wand-solo PASS: 0 min 17.2 sec am335x-bone PASS: 0 min 25.4 sec imx6q-wandboard PASS: 0 min 16.8 sec omap3-tobi,3730storm PASS: 0 min 23.3 sec imx6dl-wandboard,wand-dual PASS: 0 min 17.5 sec omap3-tobi,3530overo PASS: 0 min 20.7 sec
u8500_defconfig --------------- ste-snowball PASS: 0 min 33.1 sec
sama5_defconfig --------------- sama5d35ek PASS: 0 min 17.6 sec
Console logs for failures =========================
exynos_defconfig ----------------
exynos5250-arndale: FAIL: last 24 lines of boot log: ----------------------------------------------------
[ 1.860071] VDD_33ON_2.8V: disabling [ 1.871051] exynos-dp 145b0000.dp-controller: unable to find phy [ 1.876948] platform 145b0000.dp-controller: Driver exynos-dp requests probe deferral [ 1.877251] mmc_host mmc0: Bus speed (slot 0) = 100000000Hz (slot req 52000000Hz, actual 50000000HZ div = 1) [ 1.877336] mmc0: new high speed DDR MMC card at address 0001 [ 1.900558] isa bounce pool size: 16 pages [ 1.904414] mmcblk0: mmc0:0001 M4G1FA 3.72 GiB [ 1.909014] mmcblk0boot0: mmc0:0001 M4G1FA partition 1 1.00 MiB [ 1.914918] mmcblk0boot1: mmc0:0001 M4G1FA partition 2 1.00 MiB [ 1.920815] mmcblk0rpmb: mmc0:0001 M4G1FA partition 3 128 KiB [ 1.927522] mmcblk0: p1 p2 p3 p4 [ 1.931943] mmcblk0boot1: unknown partition table [ 1.936185] mmcblk0boot0: unknown partition table [ 2.101026] exynos-dp 145b0000.dp-controller: unable to find phy [ 2.105596] platform 145b0000.dp-controller: Driver exynos-dp requests probe deferral [ 2.114333] input: gpio_keys.4 as /devices/gpio_keys.4/input/input0 [ 2.120005] exynos-dp 145b0000.dp-controller: unable to find phy [ 2.125624] s3c-rtc 101e0000.rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) [ 2.125673] platform 145b0000.dp-controller: Driver exynos-dp requests probe deferral [ 2.142965] Waiting for root device /dev/mmcblk1p3... ~$off # PYBOOT: Exception: kernel: ERROR: failed to boot: <class 'pexpect.TIMEOUT'> # PYBOOT: Time: 89.99 seconds. # PYBOOT: Result: FAIL
multi_v7_defconfig ------------------
omap4-panda-es: FAIL: last 24 lines of boot log: ------------------------------------------------
[ 1.651611] OMAP4 PM: u-boot >= v2012.07 is required for full PM support [ 1.658721] Registering SWP/SWPB emulation handler [ 1.664733] vwl1271: 1800 mV [ 1.671264] Skipping twl internal clock init and using bootloader value (unknown osc rate) [ 1.681060] twl 0-0048: PIH (irq 39) nested IRQs [ 1.687286] twl_rtc rtc.11: Enabling TWL-RTC [ 1.694091] twl_rtc rtc.11: rtc core: registered rtc.11 as rtc0 [ 1.700988] VAUX1_6030: 1000 <--> 3000 mV at 2800 mV [ 1.707000] VAUX2_6030: 1200 <--> 2800 mV at 1800 mV [ 1.712982] VAUX3_6030: 1000 <--> 3000 mV at 1200 mV [ 1.718963] VMMC: 1200 <--> 3000 mV at 3000 mV [ 1.724426] VPP: 1800 <--> 2500 mV at 1900 mV [ 1.729736] VUSIM: 1200 <--> 2900 mV at 1800 mV [ 1.734771] VDAC: 1800 mV [ 1.734771] VANA: 2100 mV [ 1.741851] VCXIO: 1800 mV [ 1.741851] VUSB: 3300 mV [ 1.748596] V1V8: 1800 mV [ 1.752105] V2V1: 2100 mV [ 1.759094] omap_i2c 48070000.i2c: bus 0 rev0.11 at 400 kHz ~$off # PYBOOT: Exception: kernel: ERROR: failed to boot: <class 'pexpect.TIMEOUT'> # PYBOOT: Time: 104.66 seconds. # PYBOOT: Result: FAIL
kernel-build-reports@lists.linaro.org