This is not the error preventing script to execute U-Boot commands. In other words, I made mistake referring to jinja2. Anyway, my prompt is =>, and I set it correctly.

The error to prevent U-Boot commands to execute is the following:

bootloader-interrupt: Wait for prompt Press SPACE to abort autoboot in 10 seconds (timeout 00:02:00)
spawn telnet localhost 8020
Trying ::1...
Connected to localhost.
Escape character is '^]'.
ser2net port 8020 device /dev/ttyUSB0 [115200 N81] (Debian GNU/Linux)
U-Boot SPL 2017.11 (Jan 08 2018 - 21:14:17)
Trying to boot from MMC1
reading u-boot.img
reading u-boot.img
U-Boot 2017.11 (Jan 08 2018 - 21:14:17 +0100)
CPU  : AM335X-GP rev 2.1
I2C:   ready
DRAM:  512 MiB
No match for driver 'omap_hsmmc'
No match for driver 'omap_hsmmc'
Some drivers were not found
MMC:   OMAP SD/MMC: 0, OMAP SD/MMC: 1
Net:   cpsw, usb_ether
[space SHOULD BE placed here]
Press SPACE to abort autoboot in 10 seconds
[space is placed here]
end: 2.4.2 bootloader-interrupt (duration 00:00:02) [common]
start: 2.4.3 bootloader-commands (timeout 00:01:58) [common]
bootloader-commands: Wait for prompt ['=>'] (timeout 00:01:58)
switch to partitions #0, OK
mmc0 is current device

So, in other words some timers are NOT set correctly! Since I do NOT detect the =>, which is understandable why: the command for detection came AFTER => appeared!!!

Could you, please, tell me where the timer definitions are for the test cases, so I can issue much earlier in the game first space?

Thank you,

Zoran
_______

On Tue, Mar 6, 2018 at 11:20 AM, Remi Duraffort <remi.duraffort@linaro.org> wrote:

 

Anyway, I do not understand the jinja2 command:
{% set bootloader_prompt = bootloader_prompt|default('U-Boot') %} ???

 

The jinja2 documentation explains it all: http://jinja.pocoo.org/docs/2.10/templates/#assignments

--

Rémi Duraffort

LAVA Team