On 18 May 2018 at 05:48, Nikita Gupta <nikitarulz@gmail.com> wrote:

Hi Lava-Users,

I have a device 'raspberry-pi' whose boot method doesn't stop at bootloader.

You need to change the bootloader environment / configuration so that the bootloader can be interrupted.

I tried removing 'method' from boot-action but then it doesn't accept it as valid test job.

You cannot assume that this device is supported - device integration is a lot of work. There are a lot of different devices which could be described as a "raspberry pi", exactly which one are you using, what is the bootloader and what type of test job are you trying to run? Please attach logs of the boot output of the device, the test job you are trying to use and the current device dictionary.

Changing of method from u-boot to fastboot or to any other also gives error as not supported boot methods for this device.
After device bring up, it gives u-boot interrupt timed-out and job gets incomplete.

Is there any way thru which we can run tests on such devices?

--
Regards,
Nikita Gupta

_______________________________________________
Lava-users mailing list
Lava-users@lists.linaro.org
https://lists.linaro.org/mailman/listinfo/lava-users

Neil Williams
=============
neil.williams@linaro.org
http://www.linux.codehelp.co.uk/