[ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Initializing cgroup subsys cpuacct [ 0.000000] Linux version 4.3.0-rc4-next-20151009-linux+ (s0be@anvil) (gcc version 4.9.3 (Gentoo 4.9.3 p1.1, pie-0.6.2) ) #271 SMP Sun Oct 11 16:37:37 PDT 2015 [ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-4.3.0-rc4 root=UUID=815266d6-a8b9-4f63-a593-02fde178263f ro net.ifnames=0 rfkill.default_state=0 init=/sbin/init intel_iommu=on nouveau.pstate=1 nouveau.config=NvClkMode=3 zram.zram_num_devices=4 zram.num_devices=4 ro [ 0.000000] x86/fpu: Legacy x87 FPU detected. [ 0.000000] x86/fpu: Using 'lazy' FPU context switches. [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009e7ff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009e800-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000dc000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bba7bfff] usable [ 0.000000] BIOS-e820: [mem 0x00000000bba7c000-0x00000000bba81fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000bba82000-0x00000000bbb47fff] usable [ 0.000000] BIOS-e820: [mem 0x00000000bbb48000-0x00000000bbb5afff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000bbb5b000-0x00000000bbbdbfff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000bbbdc000-0x00000000bbc0efff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000bbc0f000-0x00000000bbc5cfff] usable [ 0.000000] BIOS-e820: [mem 0x00000000bbc5d000-0x00000000bbe67fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000bbe68000-0x00000000bbee7fff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000bbee8000-0x00000000bbf0efff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000bbf0f000-0x00000000bbf17fff] usable [ 0.000000] BIOS-e820: [mem 0x00000000bbf18000-0x00000000bbf1efff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000bbf1f000-0x00000000bbf6bfff] usable [ 0.000000] BIOS-e820: [mem 0x00000000bbf6c000-0x00000000bbf79fff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000bbf7a000-0x00000000bbf7cfff] ACPI data [ 0.000000] BIOS-e820: [mem 0x00000000bbf7d000-0x00000000bbf80fff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000bbf81000-0x00000000bbf81fff] ACPI data [ 0.000000] BIOS-e820: [mem 0x00000000bbf82000-0x00000000bbf8afff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000bbf8b000-0x00000000bbf8bfff] ACPI data [ 0.000000] BIOS-e820: [mem 0x00000000bbf8c000-0x00000000bbf9efff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000bbf9f000-0x00000000bbffefff] ACPI data [ 0.000000] BIOS-e820: [mem 0x00000000bbfff000-0x00000000bbffffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000bc000000-0x00000000bdffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000bf800000-0x00000000bfffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000feaff000-0x00000000feafffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec0ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed003ff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed8ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000043fffffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.6 present. [ 0.000000] DMI: LENOVO 4318CTO/4318CTO, BIOS 6NET84WW (1.45 ) 10/03/2012 [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] e820: last_pfn = 0x440000 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 disabled [ 0.000000] 1 base 000000000 mask F80000000 write-back [ 0.000000] 2 base 080000000 mask FC0000000 write-back [ 0.000000] 3 base 100000000 mask F00000000 write-back [ 0.000000] 4 base 200000000 mask E00000000 write-back [ 0.000000] 5 base 400000000 mask FC0000000 write-back [ 0.000000] 6 base 0BC000000 mask FFE000000 uncachable [ 0.000000] 7 disabled [ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT [ 0.000000] original variable MTRRs [ 0.000000] reg 1, base: 0GB, range: 2GB, type WB [ 0.000000] reg 2, base: 2GB, range: 1GB, type WB [ 0.000000] reg 3, base: 4GB, range: 4GB, type WB [ 0.000000] reg 4, base: 8GB, range: 8GB, type WB [ 0.000000] reg 5, base: 16GB, range: 1GB, type WB [ 0.000000] reg 6, base: 3008MB, range: 32MB, type UC [ 0.000000] total RAM covered: 16352M [ 0.000000] Found optimal setting for mtrr clean up [ 0.000000] gran_size: 64K chunk_size: 128M num_reg: 6 lose cover RAM: 0G [ 0.000000] New variable MTRRs [ 0.000000] reg 0, base: 0GB, range: 2GB, type WB [ 0.000000] reg 1, base: 2GB, range: 1GB, type WB [ 0.000000] reg 2, base: 3008MB, range: 32MB, type UC [ 0.000000] reg 3, base: 4GB, range: 4GB, type WB [ 0.000000] reg 4, base: 8GB, range: 8GB, type WB [ 0.000000] reg 5, base: 16GB, range: 1GB, type WB [ 0.000000] e820: update [mem 0xbc000000-0xbdffffff] usable ==> reserved [ 0.000000] e820: update [mem 0xc0000000-0xffffffff] usable ==> reserved [ 0.000000] e820: last_pfn = 0xbc000 max_arch_pfn = 0x400000000 [ 0.000000] Base memory trampoline at [ffff880000098000] 98000 size 24576 [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff] [ 0.000000] [mem 0x00000000-0x000fffff] page 4k [ 0.000000] BRK [0x0216d000, 0x0216dfff] PGTABLE [ 0.000000] BRK [0x0216e000, 0x0216efff] PGTABLE [ 0.000000] BRK [0x0216f000, 0x0216ffff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x43fe00000-0x43fffffff] [ 0.000000] [mem 0x43fe00000-0x43fffffff] page 2M [ 0.000000] BRK [0x02170000, 0x02170fff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x420000000-0x43fdfffff] [ 0.000000] [mem 0x420000000-0x43fdfffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x00100000-0xbba7bfff] [ 0.000000] [mem 0x00100000-0x001fffff] page 4k [ 0.000000] [mem 0x00200000-0xbb9fffff] page 2M [ 0.000000] [mem 0xbba00000-0xbba7bfff] page 4k [ 0.000000] init_memory_mapping: [mem 0xbba82000-0xbbb47fff] [ 0.000000] [mem 0xbba82000-0xbbb47fff] page 4k [ 0.000000] init_memory_mapping: [mem 0xbbc0f000-0xbbc5cfff] [ 0.000000] [mem 0xbbc0f000-0xbbc5cfff] page 4k [ 0.000000] BRK [0x02171000, 0x02171fff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0xbbf0f000-0xbbf17fff] [ 0.000000] [mem 0xbbf0f000-0xbbf17fff] page 4k [ 0.000000] BRK [0x02172000, 0x02172fff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0xbbf1f000-0xbbf6bfff] [ 0.000000] [mem 0xbbf1f000-0xbbf6bfff] page 4k [ 0.000000] init_memory_mapping: [mem 0xbbfff000-0xbbffffff] [ 0.000000] [mem 0xbbfff000-0xbbffffff] page 4k [ 0.000000] init_memory_mapping: [mem 0x100000000-0x41fffffff] [ 0.000000] [mem 0x100000000-0x41fffffff] page 2M [ 0.000000] ACPI: Early table checksum verification disabled [ 0.000000] ACPI: RSDP 0x00000000000F6870 000024 (v02 LENOVO) [ 0.000000] ACPI: XSDT 0x00000000BBFF18B8 00009C (v01 LENOVO TP-6N 00001450 LTP 00000000) [ 0.000000] ACPI: FACP 0x00000000BBFF1A00 0000F4 (v04 LENOVO TP-6N 00001450 LNVO 00000001) [ 0.000000] ACPI BIOS Warning (bug): 32/64X length mismatch in FADT/Pm1aControlBlock: 16/32 (20150818/tbfadt-623) [ 0.000000] ACPI BIOS Warning (bug): Invalid length for FADT/Pm1aControlBlock: 32, using default 16 (20150818/tbfadt-704) [ 0.000000] ACPI: DSDT 0x00000000BBFF1C9B 00CEAE (v01 LENOVO TP-6N 00001450 MSFT 03000001) [ 0.000000] ACPI: FACS 0x00000000BBEE7000 000040 [ 0.000000] ACPI: FACS 0x00000000BBEE7000 000040 [ 0.000000] ACPI: SSDT 0x00000000BBFF1BB4 0000E7 (v01 LENOVO TP-6N 00001450 MSFT 03000001) [ 0.000000] ACPI: ECDT 0x00000000BBFFEB49 000052 (v01 LENOVO TP-6N 00001450 LNVO 00000001) [ 0.000000] ACPI: APIC 0x00000000BBFFEB9B 0000BC (v01 LENOVO TP-6N 00001450 LNVO 00000001) [ 0.000000] ACPI: MCFG 0x00000000BBFFEC57 00003C (v01 LENOVO TP-6N 00001450 LNVO 00000001) [ 0.000000] ACPI: HPET 0x00000000BBFFEC93 000038 (v01 LENOVO TP-6N 00001450 LNVO 00000001) [ 0.000000] ACPI: ASF! 0x00000000BBFFEDBE 0000A4 (v16 LENOVO TP-6N 00001450 PTL 00000001) [ 0.000000] ACPI: SLIC 0x00000000BBFFEE62 000176 (v01 LENOVO TP-6N 00001450 LTP 00000000) [ 0.000000] ACPI: BOOT 0x00000000BBFFEFD8 000028 (v01 LENOVO TP-6N 00001450 LTP 00000001) [ 0.000000] ACPI: SSDT 0x00000000BBEE591A 00084B (v01 LENOVO TP-6N 00001450 INTL 20050513) [ 0.000000] ACPI: TCPA 0x00000000BBF8B000 000032 (v02 PTL CRESTLN 06040000 00005A52) [ 0.000000] ACPI: DMAR 0x00000000BBF81000 000068 (v01 INTEL CP_FIELD 00000001 INTL 00000001) [ 0.000000] ACPI: SSDT 0x00000000BBF7C000 0009F1 (v01 PmRef CpuPm 00003000 INTL 20060912) [ 0.000000] ACPI: SSDT 0x00000000BBF7B000 000259 (v01 PmRef Cpu0Tst 00003000 INTL 20060912) [ 0.000000] ACPI: SSDT 0x00000000BBF7A000 00049F (v01 PmRef ApTst 00003000 INTL 20060912) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: undefined version for either FADT 4.0 or MADT 1 [ 0.000000] ACPI: Error parsing LAPIC address override entry [ 0.000000] ACPI: Invalid BIOS MADT, disabling ACPI [ 0.000000] [ffffea0000000000-ffffea0010ffffff] PMD -> [ffff88042f600000-ffff88043f5fffff] on node 0 [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] [ 0.000000] Normal [mem 0x0000000100000000-0x000000043fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009dfff] [ 0.000000] node 0: [mem 0x0000000000100000-0x00000000bba7bfff] [ 0.000000] node 0: [mem 0x00000000bba82000-0x00000000bbb47fff] [ 0.000000] node 0: [mem 0x00000000bbc0f000-0x00000000bbc5cfff] [ 0.000000] node 0: [mem 0x00000000bbf0f000-0x00000000bbf17fff] [ 0.000000] node 0: [mem 0x00000000bbf1f000-0x00000000bbf6bfff] [ 0.000000] node 0: [mem 0x00000000bbfff000-0x00000000bbffffff] [ 0.000000] node 0: [mem 0x0000000100000000-0x000000043fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000043fffffff] [ 0.000000] On node 0 totalpages: 4176772 [ 0.000000] DMA zone: 64 pages used for memmap [ 0.000000] DMA zone: 21 pages reserved [ 0.000000] DMA zone: 3997 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 11952 pages used for memmap [ 0.000000] DMA32 zone: 764903 pages, LIFO batch:31 [ 0.000000] Normal zone: 53248 pages used for memmap [ 0.000000] Normal zone: 3407872 pages, LIFO batch:31 [ 0.000000] smpboot: Allowing 1 CPUs, 0 hotplug CPUs [ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009efff] [ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dbfff] [ 0.000000] PM: Registered nosave memory: [mem 0x000dc000-0x000fffff] [ 0.000000] PM: Registered nosave memory: [mem 0xbba7c000-0xbba81fff] [ 0.000000] PM: Registered nosave memory: [mem 0xbbb48000-0xbbb5afff] [ 0.000000] PM: Registered nosave memory: [mem 0xbbb5b000-0xbbbdbfff] [ 0.000000] PM: Registered nosave memory: [mem 0xbbbdc000-0xbbc0efff] [ 0.000000] PM: Registered nosave memory: [mem 0xbbc5d000-0xbbe67fff] [ 0.000000] PM: Registered nosave memory: [mem 0xbbe68000-0xbbee7fff] [ 0.000000] PM: Registered nosave memory: [mem 0xbbee8000-0xbbf0efff] [ 0.000000] PM: Registered nosave memory: [mem 0xbbf18000-0xbbf1efff] [ 0.000000] PM: Registered nosave memory: [mem 0xbbf6c000-0xbbf79fff] [ 0.000000] PM: Registered nosave memory: [mem 0xbbf7a000-0xbbf7cfff] [ 0.000000] PM: Registered nosave memory: [mem 0xbbf7d000-0xbbf80fff] [ 0.000000] PM: Registered nosave memory: [mem 0xbbf81000-0xbbf81fff] [ 0.000000] PM: Registered nosave memory: [mem 0xbbf82000-0xbbf8afff] [ 0.000000] PM: Registered nosave memory: [mem 0xbbf8b000-0xbbf8bfff] [ 0.000000] PM: Registered nosave memory: [mem 0xbbf8c000-0xbbf9efff] [ 0.000000] PM: Registered nosave memory: [mem 0xbbf9f000-0xbbffefff] [ 0.000000] PM: Registered nosave memory: [mem 0xbc000000-0xbdffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xbe000000-0xbf7fffff] [ 0.000000] PM: Registered nosave memory: [mem 0xbf800000-0xbfffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xc0000000-0xdfffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xefffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xfeafefff] [ 0.000000] PM: Registered nosave memory: [mem 0xfeaff000-0xfeafffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfeb00000-0xfebfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec0ffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec10000-0xfecfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfed1bfff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed8ffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed90000-0xfedfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff] [ 0.000000] e820: [mem 0xc0000000-0xdfffffff] available for PCI devices [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns [ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:1 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 33 pages/cpu @ffff88043fc00000 s96472 r8192 d30504 u2097152 [ 0.000000] pcpu-alloc: s96472 r8192 d30504 u2097152 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 4111487 [ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-4.3.0-rc4 root=UUID=815266d6-a8b9-4f63-a593-02fde178263f ro net.ifnames=0 rfkill.default_state=0 init=/sbin/init intel_iommu=on nouveau.pstate=1 nouveau.config=NvClkMode=3 zram.zram_num_devices=4 zram.num_devices=4 ro [ 0.000000] DMAR: IOMMU enabled [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes) [ 0.000000] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes) [ 0.000000] Memory: 16336016K/16707088K available (5365K kernel code, 873K rwdata, 2592K rodata, 5816K init, 876K bss, 371072K reserved, 0K cma-reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] Build-time adjustment of leaf fanout to 64. [ 0.000000] RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=1. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=1 [ 0.000000] NR_IRQS:4352 nr_irqs:32 16 [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.000000] tsc: Detected 1728.880 MHz processor [ 0.000024] Calibrating delay loop (skipped), value calculated using timer frequency.. 3457.76 BogoMIPS (lpj=1728880) [ 0.000443] pid_max: default: 32768 minimum: 301 [ 0.000721] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes) [ 0.000938] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes) [ 0.001805] Initializing cgroup subsys io [ 0.002022] Initializing cgroup subsys memory [ 0.006846] Initializing cgroup subsys pids [ 0.007085] CPU: Physical Processor ID: 0 [ 0.007293] CPU: Processor Core ID: 0 [ 0.007503] mce: CPU supports 9 MCE banks [ 0.007742] CPU0: Thermal monitoring enabled (TM1) [ 0.007959] process: using mwait in idle threads [ 0.008171] Last level iTLB entries: 4KB 512, 2MB 7, 4MB 7 [ 0.008380] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0 [ 0.021041] Freeing SMP alternatives memory: 24K (ffffffff8208a000 - ffffffff82090000) [ 0.024830] ftrace: allocating 24434 entries in 96 pages [ 0.046467] smpboot: weird, boot CPU (#0) not listed by the BIOS [ 0.046679] smpboot: SMP motherboard not detected [ 0.046905] smpboot: SMP disabled [ 0.047114] DMAR: Host address width 36 [ 0.047319] DMAR: DRHD base: 0x000000fed90000 flags: 0x1 [ 0.047543] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap c90780106f0462 ecap f020e2 [ 0.047946] DMAR: RMRR base: 0x000000bbee9000 end: 0x000000bbefffff [ 0.251719] Performance Events: PEBS fmt1+, 16-deep LBR, Nehalem events, Intel PMU driver. [ 0.252235] perf_event_intel: CPU erratum AAJ80 worked around [ 0.252445] perf_event_intel: CPUID marked event: 'bus cycles' unavailable [ 0.252656] ... version: 3 [ 0.252866] ... bit width: 48 [ 0.253071] ... generic registers: 4 [ 0.253276] ... value mask: 0000ffffffffffff [ 0.253484] ... max period: 000000007fffffff [ 0.253693] ... fixed-purpose events: 3 [ 0.253898] ... event mask: 000000070000000f [ 0.254387] x86: Booted up 1 node, 1 CPUs [ 0.254596] smpboot: Total of 1 processors activated (3457.76 BogoMIPS) [ 0.254934] devtmpfs: initialized [ 0.255733] PM: Registering ACPI NVS region [mem 0xbbb5b000-0xbbbdbfff] (528384 bytes) [ 0.256144] PM: Registering ACPI NVS region [mem 0xbbe68000-0xbbee7fff] (524288 bytes) [ 0.256552] PM: Registering ACPI NVS region [mem 0xbbf6c000-0xbbf79fff] (57344 bytes) [ 0.256946] PM: Registering ACPI NVS region [mem 0xbbf7d000-0xbbf80fff] (16384 bytes) [ 0.257331] PM: Registering ACPI NVS region [mem 0xbbf82000-0xbbf8afff] (36864 bytes) [ 0.257723] PM: Registering ACPI NVS region [mem 0xbbf8c000-0xbbf9efff] (77824 bytes) [ 0.258230] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns [ 0.258744] xor: measuring software checksum speed [ 0.268685] prefetch64-sse: 4748.000 MB/sec [ 0.278682] generic_sse: 4216.000 MB/sec [ 0.278890] xor: using function: prefetch64-sse (4748.000 MB/sec) [ 0.279146] RTC time: 0:53:00, date: 10/12/15 [ 0.279545] NET: Registered protocol family 16 [ 0.280109] cpuidle: using governor ladder [ 0.280321] cpuidle: using governor menu [ 0.280698] Simple Boot Flag at 0x35 set to 0x1 [ 0.280944] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 0.281419] PCI: Using configuration type 1 for base access [ 0.300695] raid6: sse2x1 gen() 2894 MB/s [ 0.317684] raid6: sse2x1 xor() 2128 MB/s [ 0.334671] raid6: sse2x2 gen() 3472 MB/s [ 0.351670] raid6: sse2x2 xor() 2607 MB/s [ 0.368666] raid6: sse2x4 gen() 3843 MB/s [ 0.385662] raid6: sse2x4 xor() 2818 MB/s [ 0.385871] raid6: using algorithm sse2x4 gen() 3843 MB/s [ 0.386082] raid6: .... xor() 2818 MB/s, rmw enabled [ 0.386289] raid6: using ssse3x2 recovery algorithm [ 0.386522] ACPI: Interpreter disabled. [ 0.386844] vgaarb: loaded [ 0.387170] SCSI subsystem initialized [ 0.387425] libata version 3.00 loaded. [ 0.387565] PCI: Probing PCI hardware [ 0.387779] PCI: root bus 00: using default resources [ 0.387782] PCI: Probing PCI hardware (bus 00) [ 0.387829] PCI host bridge to bus 0000:00 [ 0.388039] pci_bus 0000:00: root bus resource [io 0x0000-0xffff] [ 0.388252] pci_bus 0000:00: root bus resource [mem 0x00000000-0xfffffffff] [ 0.388465] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff] [ 0.388865] pci 0000:00:00.0: [8086:d132] type 00 class 0x060000 [ 0.388987] pci 0000:00:03.0: [8086:d138] type 01 class 0x060400 [ 0.389045] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold [ 0.389132] pci 0000:00:08.0: [8086:d155] type 00 class 0x088000 [ 0.389244] pci 0000:00:08.1: [8086:d156] type 00 class 0x088000 [ 0.389355] pci 0000:00:08.2: [8086:d157] type 00 class 0x088000 [ 0.389463] pci 0000:00:08.3: [8086:d158] type 00 class 0x088000 [ 0.389574] pci 0000:00:10.0: [8086:d150] type 00 class 0x088000 [ 0.389683] pci 0000:00:10.1: [8086:d151] type 00 class 0x088000 [ 0.389815] pci 0000:00:16.0: [8086:3b64] type 00 class 0x078000 [ 0.389862] pci 0000:00:16.0: reg 0x10: [mem 0xf2627800-0xf262780f 64bit] [ 0.389944] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold [ 0.390058] pci 0000:00:19.0: [8086:10ea] type 00 class 0x020000 [ 0.390095] pci 0000:00:19.0: reg 0x10: [mem 0xf2600000-0xf261ffff] [ 0.390112] pci 0000:00:19.0: reg 0x14: [mem 0xf2625000-0xf2625fff] [ 0.390129] pci 0000:00:19.0: reg 0x18: [io 0x1820-0x183f] [ 0.390196] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold [ 0.390291] pci 0000:00:1a.0: [8086:3b3c] type 00 class 0x0c0320 [ 0.390331] pci 0000:00:1a.0: reg 0x10: [mem 0xf2628000-0xf26283ff] [ 0.390423] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold [ 0.390522] pci 0000:00:1b.0: [8086:3b56] type 00 class 0x040300 [ 0.390564] pci 0000:00:1b.0: reg 0x10: [mem 0xf2620000-0xf2623fff 64bit] [ 0.390636] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.390742] pci 0000:00:1c.0: [8086:3b42] type 01 class 0x060400 [ 0.390828] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.390866] pci 0000:00:1c.0: Enabling MPC IRBNCE [ 0.391082] pci 0000:00:1c.0: Intel PCH root port ACS workaround enabled [ 0.391381] pci 0000:00:1c.1: [8086:3b44] type 01 class 0x060400 [ 0.391466] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold [ 0.391506] pci 0000:00:1c.1: Enabling MPC IRBNCE [ 0.391723] pci 0000:00:1c.1: Intel PCH root port ACS workaround enabled [ 0.392024] pci 0000:00:1c.3: [8086:3b48] type 01 class 0x060400 [ 0.392110] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold [ 0.392145] pci 0000:00:1c.3: Enabling MPC IRBNCE [ 0.392360] pci 0000:00:1c.3: Intel PCH root port ACS workaround enabled [ 0.392665] pci 0000:00:1c.4: [8086:3b4a] type 01 class 0x060400 [ 0.392746] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold [ 0.392786] pci 0000:00:1c.4: Enabling MPC IRBNCE [ 0.393001] pci 0000:00:1c.4: Intel PCH root port ACS workaround enabled [ 0.393304] pci 0000:00:1c.6: [8086:3b4e] type 01 class 0x060400 [ 0.393389] pci 0000:00:1c.6: PME# supported from D0 D3hot D3cold [ 0.393429] pci 0000:00:1c.6: Enabling MPC IRBNCE [ 0.393644] pci 0000:00:1c.6: Intel PCH root port ACS workaround enabled [ 0.393946] pci 0000:00:1c.7: [8086:3b50] type 01 class 0x060400 [ 0.394027] pci 0000:00:1c.7: PME# supported from D0 D3hot D3cold [ 0.394066] pci 0000:00:1c.7: Enabling MPC IRBNCE [ 0.394277] pci 0000:00:1c.7: Intel PCH root port ACS workaround enabled [ 0.394570] pci 0000:00:1d.0: [8086:3b34] type 00 class 0x0c0320 [ 0.394615] pci 0000:00:1d.0: reg 0x10: [mem 0xf2628400-0xf26287ff] [ 0.394714] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 0.394814] pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401 [ 0.394953] pci 0000:00:1f.0: [8086:3b07] type 00 class 0x060100 [ 0.395158] pci 0000:00:1f.2: [8086:3b2f] type 00 class 0x010601 [ 0.395195] pci 0000:00:1f.2: reg 0x10: [io 0x1818-0x181f] [ 0.395211] pci 0000:00:1f.2: reg 0x14: [io 0x180c-0x180f] [ 0.395227] pci 0000:00:1f.2: reg 0x18: [io 0x1810-0x1817] [ 0.395243] pci 0000:00:1f.2: reg 0x1c: [io 0x1808-0x180b] [ 0.395258] pci 0000:00:1f.2: reg 0x20: [io 0x1840-0x185f] [ 0.395274] pci 0000:00:1f.2: reg 0x24: [mem 0xf2627000-0xf26277ff] [ 0.395321] pci 0000:00:1f.2: PME# supported from D3hot [ 0.395414] pci 0000:00:1f.3: [8086:3b30] type 00 class 0x0c0500 [ 0.395441] pci 0000:00:1f.3: reg 0x10: [mem 0xf2628800-0xf26288ff 64bit] [ 0.395468] pci 0000:00:1f.3: reg 0x20: [io 0x1860-0x187f] [ 0.395639] pci 0000:01:00.0: [10de:0a3c] type 00 class 0x030000 [ 0.395679] pci 0000:01:00.0: reg 0x10: [mem 0xcc000000-0xccffffff] [ 0.395698] pci 0000:01:00.0: reg 0x14: [mem 0xd0000000-0xdfffffff 64bit pref] [ 0.395718] pci 0000:01:00.0: reg 0x1c: [mem 0xce000000-0xcfffffff 64bit pref] [ 0.395732] pci 0000:01:00.0: reg 0x24: [io 0x2000-0x207f] [ 0.395746] pci 0000:01:00.0: reg 0x30: [mem 0x00000000-0x0007ffff pref] [ 0.395839] vgaarb: setting as boot device: PCI:0000:01:00.0 [ 0.396049] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none [ 0.396463] pci 0000:01:00.1: [10de:0be2] type 00 class 0x040300 [ 0.396496] pci 0000:01:00.1: reg 0x10: [mem 0xcdefc000-0xcdefffff] [ 0.396688] pci 0000:00:03.0: PCI bridge to [bus 01] [ 0.396900] pci 0000:00:03.0: bridge window [io 0x2000-0x2fff] [ 0.396906] pci 0000:00:03.0: bridge window [mem 0xcc000000-0xcdefffff] [ 0.396913] pci 0000:00:03.0: bridge window [mem 0xce000000-0xdfffffff 64bit pref] [ 0.396986] pci 0000:00:1c.0: PCI bridge to [bus 02] [ 0.397323] pci 0000:03:00.0: [8086:0089] type 00 class 0x028000 [ 0.397439] pci 0000:03:00.0: reg 0x10: [mem 0xf2000000-0xf2001fff 64bit] [ 0.397701] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold [ 0.399695] pci 0000:00:1c.1: PCI bridge to [bus 03] [ 0.399916] pci 0000:00:1c.1: bridge window [mem 0xf2000000-0xf20fffff] [ 0.400000] pci 0000:00:1c.3: PCI bridge to [bus 05-0c] [ 0.400219] pci 0000:00:1c.3: bridge window [io 0x3000-0x3fff] [ 0.400225] pci 0000:00:1c.3: bridge window [mem 0xf0000000-0xf1ffffff] [ 0.400239] pci 0000:00:1c.3: bridge window [mem 0xf2700000-0xf27fffff 64bit pref] [ 0.400382] pci 0000:0d:00.0: [1180:e822] type 00 class 0x080500 [ 0.400452] pci 0000:0d:00.0: MMC controller base frequency changed to 50Mhz. [ 0.400741] pci 0000:0d:00.0: reg 0x10: [mem 0xf2100000-0xf21000ff] [ 0.400871] pci 0000:0d:00.0: supports D1 D2 [ 0.400875] pci 0000:0d:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.401069] pci 0000:0d:00.1: [1180:e230] type 00 class 0x088000 [ 0.401142] pci 0000:0d:00.1: reg 0x10: [mem 0xf2100400-0xf21004ff] [ 0.401272] pci 0000:0d:00.1: supports D1 D2 [ 0.401276] pci 0000:0d:00.1: PME# supported from D0 D1 D2 D3hot D3cold [ 0.402737] pci 0000:00:1c.4: PCI bridge to [bus 0d] [ 0.402952] pci 0000:00:1c.4: bridge window [mem 0xf2100000-0xf21fffff] [ 0.403084] pci 0000:0f:00.0: [1033:0194] type 00 class 0x0c0330 [ 0.403199] pci 0000:0f:00.0: reg 0x10: [mem 0xf2200000-0xf2201fff 64bit] [ 0.403406] pci 0000:0f:00.0: PME# supported from D0 D3hot D3cold [ 0.404695] pci 0000:00:1c.6: PCI bridge to [bus 0f-16] [ 0.404916] pci 0000:00:1c.6: bridge window [mem 0xf2200000-0xf22fffff] [ 0.405069] pci 0000:17:00.0: [1180:e822] type 00 class 0x080500 [ 0.405134] pci 0000:17:00.0: MMC controller base frequency changed to 50Mhz. [ 0.405418] pci 0000:17:00.0: reg 0x10: [mem 0xf2300000-0xf23000ff] [ 0.405548] pci 0000:17:00.0: supports D1 D2 [ 0.405552] pci 0000:17:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.405755] pci 0000:17:00.3: [1180:e832] type 00 class 0x0c0010 [ 0.405829] pci 0000:17:00.3: reg 0x10: [mem 0xf2300800-0xf2300fff] [ 0.405951] pci 0000:17:00.3: supports D1 D2 [ 0.405956] pci 0000:17:00.3: PME# supported from D0 D1 D2 D3hot D3cold [ 0.407723] pci 0000:00:1c.7: PCI bridge to [bus 17-1e] [ 0.407942] pci 0000:00:1c.7: bridge window [mem 0xf2300000-0xf23fffff] [ 0.408065] pci 0000:00:1e.0: PCI bridge to [bus 1f] (subtractive decode) [ 0.408289] pci 0000:00:1e.0: bridge window [io 0x0000-0xffff] (subtractive decode) [ 0.408294] pci 0000:00:1e.0: bridge window [mem 0x00000000-0xfffffffff] (subtractive decode) [ 0.408349] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 1f [ 0.408381] PCI: root bus 04: using default resources [ 0.408385] PCI: Probing PCI hardware (bus 04) [ 0.408431] PCI host bridge to bus 0000:04 [ 0.408640] pci_bus 0000:04: root bus resource [io 0x0000-0xffff] [ 0.408857] pci_bus 0000:04: root bus resource [mem 0x00000000-0xfffffffff] [ 0.409073] pci_bus 0000:04: No busn resource found for root bus, will use [bus 04-ff] [ 0.409458] pci_bus 0000:04: busn_res: can not insert [bus 04-ff] under domain [bus 00-ff] (conflicts with (null) [bus 00-1f]) [ 0.409501] pci_bus 0000:04: busn_res: [bus 04-ff] end is updated to 04 [ 0.409507] pci_bus 0000:04: busn_res: can not insert [bus 04] under domain [bus 00-ff] (conflicts with (null) [bus 00-1f]) [ 0.409698] PCI: pci_cache_line_size set to 64 bytes [ 0.410056] e820: reserve RAM buffer [mem 0x0009e800-0x0009ffff] [ 0.410060] e820: reserve RAM buffer [mem 0xbba7c000-0xbbffffff] [ 0.410066] e820: reserve RAM buffer [mem 0xbbb48000-0xbbffffff] [ 0.410071] e820: reserve RAM buffer [mem 0xbbc5d000-0xbbffffff] [ 0.410076] e820: reserve RAM buffer [mem 0xbbf18000-0xbbffffff] [ 0.410081] e820: reserve RAM buffer [mem 0xbbf6c000-0xbbffffff] [ 0.410468] clocksource: Switched to clocksource refined-jiffies [ 0.417601] pnp: PnP ACPI: disabled [ 0.421121] pci 0000:01:00.0: BAR 6: assigned [mem 0xcd000000-0xcd07ffff pref] [ 0.421509] pci 0000:00:03.0: PCI bridge to [bus 01] [ 0.421724] pci 0000:00:03.0: bridge window [io 0x2000-0x2fff] [ 0.421940] pci 0000:00:03.0: bridge window [mem 0xcc000000-0xcdefffff] [ 0.422154] pci 0000:00:03.0: bridge window [mem 0xce000000-0xdfffffff 64bit pref] [ 0.422540] pci 0000:00:1c.0: PCI bridge to [bus 02] [ 0.422765] pci 0000:00:1c.1: PCI bridge to [bus 03] [ 0.422980] pci 0000:00:1c.1: bridge window [mem 0xf2000000-0xf20fffff] [ 0.423198] pci 0000:00:1c.3: PCI bridge to [bus 05-0c] [ 0.423414] pci 0000:00:1c.3: bridge window [io 0x3000-0x3fff] [ 0.423635] pci 0000:00:1c.3: bridge window [mem 0xf0000000-0xf1ffffff] [ 0.423854] pci 0000:00:1c.3: bridge window [mem 0xf2700000-0xf27fffff 64bit pref] [ 0.424245] pci 0000:00:1c.4: PCI bridge to [bus 0d] [ 0.424461] pci 0000:00:1c.4: bridge window [mem 0xf2100000-0xf21fffff] [ 0.424688] pci 0000:00:1c.6: PCI bridge to [bus 0f-16] [ 0.424904] pci 0000:00:1c.6: bridge window [mem 0xf2200000-0xf22fffff] [ 0.425125] pci 0000:00:1c.7: PCI bridge to [bus 17-1e] [ 0.425344] pci 0000:00:1c.7: bridge window [mem 0xf2300000-0xf23fffff] [ 0.425570] pci 0000:00:1e.0: PCI bridge to [bus 1f] [ 0.425798] pci_bus 0000:00: resource 4 [io 0x0000-0xffff] [ 0.425802] pci_bus 0000:00: resource 5 [mem 0x00000000-0xfffffffff] [ 0.425807] pci_bus 0000:01: resource 0 [io 0x2000-0x2fff] [ 0.425811] pci_bus 0000:01: resource 1 [mem 0xcc000000-0xcdefffff] [ 0.425815] pci_bus 0000:01: resource 2 [mem 0xce000000-0xdfffffff 64bit pref] [ 0.425820] pci_bus 0000:03: resource 1 [mem 0xf2000000-0xf20fffff] [ 0.425824] pci_bus 0000:05: resource 0 [io 0x3000-0x3fff] [ 0.425828] pci_bus 0000:05: resource 1 [mem 0xf0000000-0xf1ffffff] [ 0.425832] pci_bus 0000:05: resource 2 [mem 0xf2700000-0xf27fffff 64bit pref] [ 0.425836] pci_bus 0000:0d: resource 1 [mem 0xf2100000-0xf21fffff] [ 0.425841] pci_bus 0000:0f: resource 1 [mem 0xf2200000-0xf22fffff] [ 0.425845] pci_bus 0000:17: resource 1 [mem 0xf2300000-0xf23fffff] [ 0.425849] pci_bus 0000:1f: resource 4 [io 0x0000-0xffff] [ 0.425853] pci_bus 0000:1f: resource 5 [mem 0x00000000-0xfffffffff] [ 0.425858] pci_bus 0000:04: resource 4 [io 0x0000-0xffff] [ 0.425862] pci_bus 0000:04: resource 5 [mem 0x00000000-0xfffffffff] [ 0.425908] NET: Registered protocol family 2 [ 0.426377] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.427443] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.428281] TCP: Hash tables configured (established 131072 bind 65536) [ 0.428526] UDP hash table entries: 8192 (order: 6, 262144 bytes) [ 0.428967] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes) [ 0.429460] NET: Registered protocol family 1 [ 0.448816] pci 0000:01:00.0: Video device with shadowed ROM [ 0.456865] pci 0000:0f:00.0: xHCI BIOS handoff failed (BIOS bug ?) 00010401 [ 0.457851] PCI: CLS 64 bytes, default 64 [ 0.617371] DMAR: No ATSR found [ 0.617785] DMAR: dmar0: Using Queued invalidation [ 0.618012] DMAR: Setting RMRR: [ 0.618243] DMAR: Setting identity map for device 0000:00:1a.0 [0xbbee9000 - 0xbbefffff] [ 0.618677] DMAR: Setting identity map for device 0000:00:1d.0 [0xbbee9000 - 0xbbefffff] [ 0.619086] DMAR: Prepare 0-16MiB unity mapping for LPC [ 0.619309] DMAR: Setting identity map for device 0000:00:1f.0 [0x0 - 0xffffff] [ 0.619936] DMAR: Intel(R) Virtualization Technology for Directed I/O [ 0.620221] iommu: Adding device 0000:00:00.0 to group 0 [ 0.620451] iommu: Adding device 0000:00:03.0 to group 1 [ 0.620727] iommu: Adding device 0000:00:08.0 to group 2 [ 0.620953] iommu: Adding device 0000:00:08.1 to group 2 [ 0.621178] iommu: Adding device 0000:00:08.2 to group 2 [ 0.621402] iommu: Adding device 0000:00:08.3 to group 2 [ 0.621645] iommu: Adding device 0000:00:10.0 to group 3 [ 0.621873] iommu: Adding device 0000:00:10.1 to group 3 [ 0.622106] iommu: Adding device 0000:00:16.0 to group 4 [ 0.622332] iommu: Adding device 0000:00:19.0 to group 5 [ 0.622559] iommu: Adding device 0000:00:1a.0 to group 6 [ 0.622791] iommu: Adding device 0000:00:1b.0 to group 7 [ 0.623019] iommu: Adding device 0000:00:1c.0 to group 8 [ 0.623249] iommu: Adding device 0000:00:1c.1 to group 9 [ 0.623476] iommu: Adding device 0000:00:1c.3 to group 10 [ 0.623708] iommu: Adding device 0000:00:1c.4 to group 11 [ 0.623939] iommu: Adding device 0000:00:1c.6 to group 12 [ 0.624167] iommu: Adding device 0000:00:1c.7 to group 13 [ 0.624394] iommu: Adding device 0000:00:1d.0 to group 14 [ 0.624627] iommu: Adding device 0000:00:1e.0 to group 15 [ 0.624872] iommu: Adding device 0000:00:1f.0 to group 16 [ 0.625099] iommu: Adding device 0000:00:1f.2 to group 16 [ 0.625326] iommu: Adding device 0000:00:1f.3 to group 16 [ 0.625544] iommu: Adding device 0000:01:00.0 to group 1 [ 0.625765] iommu: Adding device 0000:01:00.1 to group 1 [ 0.625994] iommu: Adding device 0000:03:00.0 to group 17 [ 0.626234] iommu: Adding device 0000:0d:00.0 to group 18 [ 0.626462] iommu: Adding device 0000:0d:00.1 to group 18 [ 0.626693] iommu: Adding device 0000:0f:00.0 to group 19 [ 0.631528] iommu: Adding device 0000:17:00.0 to group 20 [ 0.631755] iommu: Adding device 0000:17:00.3 to group 20 [ 0.635167] platform rtc_cmos: registered platform RTC device (no PNP device found) [ 0.636115] futex hash table entries: 256 (order: 2, 16384 bytes) [ 0.636356] audit: initializing netlink subsys (disabled) [ 0.636585] audit: type=2000 audit(1444611180.511:1): initialized [ 0.640542] zbud: loaded [ 0.642301] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) [ 0.642700] io scheduler noop registered [ 0.642910] io scheduler deadline registered [ 0.643180] io scheduler cfq registered (default) [ 0.644448] pcieport 0000:00:03.0: Signaling PME through PCIe PME interrupt [ 0.644678] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt [ 0.644892] pci 0000:01:00.1: Signaling PME through PCIe PME interrupt [ 0.645106] pcie_pme 0000:00:03.0:pcie01: service driver pcie_pme loaded [ 0.645153] pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt [ 0.645374] pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded [ 0.645418] pcieport 0000:00:1c.1: Signaling PME through PCIe PME interrupt [ 0.645655] pci 0000:03:00.0: Signaling PME through PCIe PME interrupt [ 0.645880] pcie_pme 0000:00:1c.1:pcie01: service driver pcie_pme loaded [ 0.645928] pcieport 0000:00:1c.3: Signaling PME through PCIe PME interrupt [ 0.646149] pcie_pme 0000:00:1c.3:pcie01: service driver pcie_pme loaded [ 0.646195] pcieport 0000:00:1c.4: Signaling PME through PCIe PME interrupt [ 0.646409] pci 0000:0d:00.0: Signaling PME through PCIe PME interrupt [ 0.646635] pci 0000:0d:00.1: Signaling PME through PCIe PME interrupt [ 0.646861] pcie_pme 0000:00:1c.4:pcie01: service driver pcie_pme loaded [ 0.646923] pcieport 0000:00:1c.6: Signaling PME through PCIe PME interrupt [ 0.647138] pci 0000:0f:00.0: Signaling PME through PCIe PME interrupt [ 0.647356] pcie_pme 0000:00:1c.6:pcie01: service driver pcie_pme loaded [ 0.647401] pcieport 0000:00:1c.7: Signaling PME through PCIe PME interrupt [ 0.647630] pci 0000:17:00.0: Signaling PME through PCIe PME interrupt [ 0.647843] pci 0000:17:00.3: Signaling PME through PCIe PME interrupt [ 0.648065] pcie_pme 0000:00:1c.7:pcie01: service driver pcie_pme loaded [ 0.648083] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.648321] pciehp 0000:00:1c.3:pcie04: Slot #3 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ LLActRep+ [ 0.648776] pciehp 0000:00:1c.3:pcie04: service driver pciehp loaded [ 0.648788] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 0.649013] intel_idle: MWAIT substates: 0x1120 [ 0.649024] intel_idle: v0.4 model 0x1E [ 0.649026] intel_idle: lapic_timer_reliable_states 0x2 [ 0.649217] xenfs: not registering filesystem on non-xen platform [ 0.649635] Failed to find cpu0 device node [ 0.649844] Unable to detect cache hierarchy from DT for CPU 0 [ 0.653440] brd: module loaded [ 0.653878] zram: Added device: zram0 [ 0.654318] zram: Added device: zram1 [ 0.654723] zram: Added device: zram2 [ 0.655156] zram: Added device: zram3 [ 0.655462] ahci 0000:00:1f.2: version 3.0 [ 0.655584] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled [ 0.666076] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 3 Gbps 0x33 impl SATA mode [ 0.666465] ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck stag pm led clo pio slum part ems sxs apst [ 0.672913] scsi host0: ahci [ 0.673285] scsi host1: ahci [ 0.673613] scsi host2: ahci [ 0.673941] scsi host3: ahci [ 0.674291] scsi host4: ahci [ 0.674617] scsi host5: ahci [ 0.674908] ata1: SATA max UDMA/133 abar m2048@0xf2627000 port 0xf2627100 irq 24 [ 0.675322] ata2: SATA max UDMA/133 abar m2048@0xf2627000 port 0xf2627180 irq 24 [ 0.675706] ata3: DUMMY [ 0.675907] ata4: DUMMY [ 0.676133] ata5: SATA max UDMA/133 abar m2048@0xf2627000 port 0xf2627300 irq 24 [ 0.676523] ata6: SATA max UDMA/133 abar m2048@0xf2627000 port 0xf2627380 irq 24 [ 0.677013] i8042: PNP: No PS/2 controller found. Probing ports directly. [ 0.682555] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.682772] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 0.683190] mousedev: PS/2 mouse device common for all mice [ 0.683535] input: PC Speaker as /devices/platform/pcspkr/input/input1 [ 0.683929] device-mapper: ioctl: 4.33.0-ioctl (2015-8-18) initialised: dm-devel@redhat.com [ 0.684582] Initializing XFRM netlink socket [ 0.685167] NET: Registered protocol family 10 [ 0.685731] NET: Registered protocol family 17 [ 0.685949] NET: Registered protocol family 15 [ 0.686766] registered taskstats version 1 [ 0.687084] zswap: loaded using pool lzo/zbud [ 0.687313] ------------[ cut here ]------------ [ 0.687555] WARNING: CPU: 0 PID: 1 at mm/early_ioremap.c:91 check_early_ioremap_leak+0x3f/0x45() [ 0.687940] Debug warning: early ioremap leak of 1 areas detected. please boot with early_ioremap_debug and report the dmesg. [ 0.688347] Modules linked in: [ 0.688579] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.3.0-rc4-next-20151009-linux+ #271 [ 0.688962] Hardware name: LENOVO 4318CTO/4318CTO, BIOS 6NET84WW (1.45 ) 10/03/2012 [ 0.689361] 0000000000000000 ffff88042d8afde8 ffffffff812ed22c ffff88042d8afe30 [ 0.689847] ffff88042d8afe20 ffffffff81056d88 ffffffff81b1e0a9 ffff88042c76d401 [ 0.690347] ffffffff81b1e06a 0000000000000000 ffffffff81a11080 ffff88042d8afe88 [ 0.690830] Call Trace: [ 0.691053] [] dump_stack+0x44/0x55 [ 0.691266] [] warn_slowpath_common+0x9f/0xb8 [ 0.691476] [] ? check_early_ioremap_leak+0x3f/0x45 [ 0.691688] [] ? early_ioremap_debug_setup+0x12/0x12 [ 0.691901] [] warn_slowpath_fmt+0x48/0x50 [ 0.692130] [] ? do_one_initcall+0x90/0x17a [ 0.692341] [] check_early_ioremap_leak+0x3f/0x45 [ 0.692552] [] do_one_initcall+0xed/0x17a [ 0.692763] [] kernel_init_freeable+0x10e/0x196 [ 0.692977] [] ? rest_init+0x79/0x79 [ 0.693204] [] kernel_init+0xe/0xda [ 0.693416] [] ret_from_fork+0x3f/0x70 [ 0.693626] [] ? rest_init+0x79/0x79 [ 0.693835] ---[ end trace dd833814130a8abe ]--- [ 0.694147] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0 [ 0.695549] Btrfs loaded [ 0.696437] Magic number: 3:262:860 [ 0.696677] hctosys: unable to open rtc device (rtc0) [ 0.697807] device-tree: Duplicate name in testcase-data, renamed to "duplicate-name#1" [ 0.699117] ### dt-test ### start of unittest - you will see error messages [ 0.699435] /testcase-data/phandle-tests/consumer-a: could not get #phandle-cells-missing for /testcase-data/phandle-tests/provider1 [ 0.699828] /testcase-data/phandle-tests/consumer-a: could not get #phandle-cells-missing for /testcase-data/phandle-tests/provider1 [ 0.700273] /testcase-data/phandle-tests/consumer-a: could not find phandle [ 0.700489] /testcase-data/phandle-tests/consumer-a: could not find phandle [ 0.700703] /testcase-data/phandle-tests/consumer-a: arguments longer than property [ 0.701100] /testcase-data/phandle-tests/consumer-a: arguments longer than property [ 0.702314] irq: no irq domain found for /testcase-data/interrupts/intc0 ! [ 0.704022] overlay_is_topmost: #5 clashes #6 @/testcase-data/overlay-node/test-bus/test-unittest8 [ 0.704435] overlay_removal_is_ok: overlay #5 is not topmost [ 0.704647] of_overlay_destroy: removal check failed for overlay #5 [ 0.706459] ### dt-test ### end of unittest - 148 passed, 0 failed [ 0.706691] PM: Hibernation image not present or could not be loaded. [ 0.986033] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.316661] ata1.00: ATA-9: ST1000LM014-1EJ164, SM11, max UDMA/133 [ 1.316877] ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 1.361049] ata1.00: configured for UDMA/133 [ 1.361424] scsi 0:0:0:0: Direct-Access ATA ST1000LM014-1EJ1 SM11 PQ: 0 ANSI: 5 [ 1.362147] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB) [ 1.362535] sd 0:0:0:0: [sda] 4096-byte physical blocks [ 1.362809] sd 0:0:0:0: [sda] Write Protect is off [ 1.363047] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.363077] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 1.363359] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.364354] sda: sda1 sda2 sda3 sda4 [ 1.365091] sd 0:0:0:0: [sda] Attached SCSI disk [ 1.634966] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x18ebb92aef2, max_idle_ns: 440795243508 ns [ 1.635366] clocksource: Switched to clocksource tsc [ 1.667984] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.668409] ata2.00: ATA-8: Corsair CSSD-V128GB2, 2.2, max UDMA/133 [ 1.668623] ata2.00: 250069680 sectors, multi 1: LBA48 NCQ (depth 31/32), AA [ 1.669699] ata2.00: configured for UDMA/133 [ 1.670081] scsi 1:0:0:0: Direct-Access ATA Corsair CSSD-V12 2.2 PQ: 0 ANSI: 5 [ 1.670751] sd 1:0:0:0: [sdb] 250069680 512-byte logical blocks: (128 GB/119 GiB) [ 1.671246] sd 1:0:0:0: [sdb] Write Protect is off [ 1.671458] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 1.671486] sd 1:0:0:0: Attached scsi generic sg1 type 0 [ 1.671756] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.674018] sdb: sdb1 sdb2 sdb3 sdb4 [ 1.674727] sd 1:0:0:0: [sdb] Attached SCSI removable disk [ 1.976958] ata5: SATA link down (SStatus 0 SControl 300) [ 2.281932] ata6: SATA link down (SStatus 0 SControl 300) [ 2.285205] Freeing unused kernel memory: 5816K (ffffffff81adc000 - ffffffff8208a000) [ 2.285590] Write protecting the kernel read-only data: 10240k [ 2.286298] Freeing unused kernel memory: 768K (ffff880001540000 - ffff880001600000) [ 2.294834] Freeing unused kernel memory: 1504K (ffff880001888000 - ffff880001a00000) [ 2.322480] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 2.361095] zram0: detected capacity change from 0 to 134217728 [ 2.370328] zram1: detected capacity change from 0 to 10737418240 [ 2.371575] zram2: detected capacity change from 0 to 1073741824 [ 2.378118] random: mkfs.ext4 urandom read with 42 bits of entropy available [ 2.379580] EXT4-fs (zram0): couldn't mount as ext3 due to feature incompatibilities [ 2.380136] EXT4-fs (zram0): couldn't mount as ext2 due to feature incompatibilities [ 2.380800] EXT4-fs (zram0): mounted filesystem without journal. Opts: (null) [ 2.643151] BTRFS: device fsid 815266d6-a8b9-4f63-a593-02fde178263f devid 1 transid 1347601 /dev/sdb3 [ 2.643995] BTRFS info (device sdb3): disk space caching is enabled [ 2.647332] BTRFS: bdev /dev/sdb3 errs: wr 9, rd 0, flush 0, corrupt 0, gen 0 [ 2.673418] BTRFS: detected SSD devices, enabling SSD mode [ 3.436455] systemd-udevd[380]: starting version 225 [ 3.466578] systemd-udevd[381]: Network interface NamePolicy= disabled on kernel command line, ignoring. [ 3.579504] systemd-udevd[381]: Network interface NamePolicy= disabled on kernel command line, ignoring. [ 3.786055] usbcore: registered new interface driver usbfs [ 3.786080] usbcore: registered new interface driver hub [ 3.795527] usbcore: registered new device driver usb [ 3.816115] pps_core: LinuxPPS API ver. 1 registered [ 3.816119] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 3.823179] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 3.841112] PTP clock support registered [ 3.841591] ehci-pci: EHCI PCI platform driver [ 3.841690] ehci-pci 0000:00:1a.0: EHCI Host Controller [ 3.841701] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1 [ 3.841728] ehci-pci 0000:00:1a.0: debug port 2 [ 3.843369] Linux agpgart interface v0.103 [ 3.854482] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported [ 3.882090] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k [ 3.882095] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 3.891174] sdhci: Secure Digital Host Controller Interface driver [ 3.891178] sdhci: Copyright(c) Pierre Ossman [ 3.895981] sdhci-pci 0000:0d:00.0: SDHCI controller found [1180:e822] (rev 1) [ 3.896124] sdhci-pci 0000:0d:00.0: Will use DMA mode even though HW doesn't fully claim to support it. [ 3.896135] sdhci-pci 0000:0d:00.0: No vmmc regulator found [ 3.896138] sdhci-pci 0000:0d:00.0: No vqmmc regulator found [ 3.906738] mmc0: SDHCI controller on PCI [0000:0d:00.0] using DMA [ 3.906896] sdhci-pci 0000:17:00.0: SDHCI controller found [1180:e822] (rev 1) [ 3.906996] sdhci-pci 0000:17:00.0: Will use DMA mode even though HW doesn't fully claim to support it. [ 3.907007] sdhci-pci 0000:17:00.0: No vmmc regulator found [ 3.907011] sdhci-pci 0000:17:00.0: No vqmmc regulator found [ 3.916875] mmc1: SDHCI controller on PCI [0000:17:00.0] using DMA [ 3.918491] ehci-pci 0000:00:1a.0: irq 11, io mem 0xf2628000 [ 3.924144] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00 [ 3.924308] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 3.924314] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.924319] usb usb1: Product: EHCI Host Controller [ 3.924323] usb usb1: Manufacturer: Linux 4.3.0-rc4-next-20151009-linux+ ehci_hcd [ 3.924326] usb usb1: SerialNumber: 0000:00:1a.0 [ 3.924998] hub 1-0:1.0: USB hub found [ 3.925012] hub 1-0:1.0: 3 ports detected [ 3.925411] xhci_hcd 0000:0f:00.0: xHCI Host Controller [ 3.925423] xhci_hcd 0000:0f:00.0: new USB bus registered, assigned bus number 2 [ 3.925667] xhci_hcd 0000:0f:00.0: hcc params 0x014042cb hci version 0x96 quirks 0x00000004 [ 3.925925] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 [ 3.925930] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.925934] usb usb2: Product: xHCI Host Controller [ 3.925938] usb usb2: Manufacturer: Linux 4.3.0-rc4-next-20151009-linux+ xhci-hcd [ 3.925941] usb usb2: SerialNumber: 0000:0f:00.0 [ 3.926142] hub 2-0:1.0: USB hub found [ 3.926158] hub 2-0:1.0: 2 ports detected [ 3.926344] xhci_hcd 0000:0f:00.0: xHCI Host Controller [ 3.926721] xhci_hcd 0000:0f:00.0: new USB bus registered, assigned bus number 3 [ 3.929664] rtc_cmos rtc_cmos: rtc core: registered rtc_cmos as rtc0 [ 3.929696] rtc_cmos rtc_cmos: alarms up to one day, 114 bytes nvram [ 3.936903] usb usb3: We don't know the algorithms for LPM for this host, disabling LPM. [ 3.936946] usb usb3: New USB device found, idVendor=1d6b, idProduct=0003 [ 3.936952] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.936956] usb usb3: Product: xHCI Host Controller [ 3.936960] usb usb3: Manufacturer: Linux 4.3.0-rc4-next-20151009-linux+ xhci-hcd [ 3.936964] usb usb3: SerialNumber: 0000:0f:00.0 [ 3.938346] hub 3-0:1.0: USB hub found [ 3.938407] hub 3-0:1.0: 2 ports detected [ 3.947067] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode [ 3.961313] snd_hda_codec_conexant hdaudioC0D0: CX20585: BIOS auto-probing. [ 3.961855] snd_hda_codec_conexant hdaudioC0D0: autoconfig for CX20585: line_outs=1 (0x1f/0x0/0x0/0x0/0x0) type:speaker [ 3.961861] snd_hda_codec_conexant hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 3.961866] snd_hda_codec_conexant hdaudioC0D0: hp_outs=2 (0x1c/0x19/0x0/0x0/0x0) [ 3.961870] snd_hda_codec_conexant hdaudioC0D0: mono: mono_out=0x0 [ 3.961874] snd_hda_codec_conexant hdaudioC0D0: inputs: [ 3.961878] snd_hda_codec_conexant hdaudioC0D0: Internal Mic=0x23 [ 3.961882] snd_hda_codec_conexant hdaudioC0D0: Mic=0x1b [ 3.961886] snd_hda_codec_conexant hdaudioC0D0: Dock Mic=0x1a [ 3.963603] snd_hda_codec_conexant hdaudioC0D0: Enable sync_write for stable communication [ 3.963613] BUG: unable to handle kernel NULL pointer dereference at 0000000000000018 [ 3.963712] IP: [] acpi_ns_walk_namespace+0x3d/0x18f [ 3.963787] PGD 42cb64067 PUD 42cb65067 PMD 0 [ 3.963901] Oops: 0000 [#1] SMP [ 3.963985] Modules linked in: snd_hda_codec_conexant(+) mfd_core snd_hda_codec_generic firewire_ohci(+) firewire_core rtc_cmos crc_itu_t sdhci_pci drm(+) sdhci xhci_pci(+) e1000e(+) cfg80211 xhci_hcd snd_hda_intel mei_me ehci_pci(+) mmc_core ptp agpgart mei snd_hda_codec pps_core ehci_hcd syscopyarea rfkill sysfillrect snd_hda_core sysimgblt fb_sys_fops snd_pcm fb snd_timer fbdev usbcore usb_common snd soundcore [ 3.965088] CPU: 0 PID: 466 Comm: modprobe Tainted: G W 4.3.0-rc4-next-20151009-linux+ #271 [ 3.965134] Hardware name: LENOVO 4318CTO/4318CTO, BIOS 6NET84WW (1.45 ) 10/03/2012 [ 3.965178] task: ffff88042c838000 ti: ffff88042d340000 task.ti: ffff88042d340000 [ 3.965220] RIP: 0010:[] [] acpi_ns_walk_namespace+0x3d/0x18f [ 3.965293] RSP: 0018:ffff88042d343a80 EFLAGS: 00010202 [ 3.965332] RAX: ffff88042d343af0 RBX: 0000000000000001 RCX: 0000000000000001 [ 3.965373] RDX: 00000000ffffffff RSI: ffffffffffffffff RDI: 0000000000000006 [ 3.965415] RBP: ffff88042d343ad0 R08: ffffffff8135c425 R09: 0000000000000000 [ 3.965456] R10: ffff8800baf31a00 R11: ffffffff820e2300 R12: 0000000000000001 [ 3.965669] R13: ffff880429614000 R14: 0000000000000000 R15: 0000000000000000 [ 3.965882] FS: 00007f756368b700(0000) GS:ffff88043fc00000(0000) knlGS:0000000000000000 [ 3.966266] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 3.966474] CR2: 0000000000000018 CR3: 000000042cb67000 CR4: 00000000000006f0 [ 3.966685] Stack: [ 3.966887] 0000000000000023 0000000000000001 ffff88042d343af0 00000001ffffffff [ 3.967369] ffff880000000006 0000000000000000 ffff88042c7bf000 ffff880429614000 [ 3.967852] 0000000000000001 0000000000000001 ffff88042d343b10 ffffffff8135c340 [ 3.968334] Call Trace: [ 3.968540] [] acpi_get_devices+0x5b/0x71 [ 3.968750] [] ? 0xffffffffa03aa000 [ 3.968963] [] hda_fixup_thinkpad_acpi+0x5a/0x186 [snd_hda_codec_conexant] [ 3.969372] [] apply_fixup+0xb6/0x127 [snd_hda_codec] [ 3.969594] [] snd_hda_apply_fixup+0x22/0x24 [snd_hda_codec] [ 3.969982] [] patch_conexant_auto+0x365/0x382 [snd_hda_codec_conexant] [ 3.970371] [] hda_codec_driver_probe+0xb8/0x118 [snd_hda_codec] [ 3.970758] [] driver_probe_device+0xfc/0x26c [ 3.970970] [] __driver_attach+0x5d/0x7f [ 3.971181] [] ? driver_probe_device+0x26c/0x26c [ 3.971391] [] bus_for_each_dev+0x6d/0x85 [ 3.971601] [] driver_attach+0x1e/0x20 [ 3.971811] [] bus_add_driver+0xf1/0x1e9 [ 3.972020] [] ? 0xffffffffa03ae000 [ 3.972228] [] driver_register+0x8e/0xca [ 3.972437] [] ? 0xffffffffa03ae000 [ 3.972650] [] __hda_codec_driver_register+0x5a/0x5c [snd_hda_codec] [ 3.973040] [] conexant_driver_init+0x1e/0x20 [snd_hda_codec_conexant] [ 3.973425] [] do_one_initcall+0xed/0x17a [ 3.973635] [] ? kmem_cache_alloc_trace+0x3d/0x16d [ 3.973848] [] ? do_init_module+0x27/0x1df [ 3.974059] [] do_init_module+0x5f/0x1df [ 3.974270] [] load_module+0x185a/0x1c00 [ 3.974481] [] ? vfs_read+0xf1/0xff [ 3.974691] [] ? copy_module_from_fd+0x8e/0xef [ 3.974902] [] SyS_finit_module+0x5e/0x6b [ 3.975111] [] ? SyS_finit_module+0x5e/0x6b [ 3.975324] [] entry_SYSCALL_64_fastpath+0x16/0x75 [ 3.975535] Code: 41 54 41 89 cc 53 bb 01 00 00 00 48 83 ec 28 48 83 fe ff 89 7d d0 4c 0f 44 35 e4 6c df 00 89 55 c8 45 31 ff 41 83 e4 01 89 4d cc <4d> 8b 6e 18 4c 89 45 c0 4c 89 4d b8 c7 45 d4 00 00 00 00 4d 85 [ 3.977772] RIP [] acpi_ns_walk_namespace+0x3d/0x18f [ 3.978010] RSP [ 3.978214] CR2: 0000000000000018 [ 3.978456] ---[ end trace dd833814130a8abf ]--- [ 3.990613] [drm] Initialized drm 1.1.0 20060810 [ 3.995416] Intel(R) Wireless WiFi driver for Linux [ 3.995647] Copyright(c) 2003- 2015 Intel Corporation [ 3.999310] iwlwifi 0000:03:00.0: can't disable ASPM; OS doesn't have ASPM control [ 4.001640] random: nonblocking pool is initialized [ 4.007844] iwlwifi 0000:03:00.0: Direct firmware load for iwlwifi-6050-exp.ucode failed with error -2 [ 4.012450] iwlwifi 0000:03:00.0: loaded firmware version 41.28.5.1 build 33926 op_mode iwldvm [ 4.033843] firewire_ohci 0000:17:00.3: added OHCI v1.10 device as card 0, 4 IR + 4 IT contexts, quirks 0x11 [ 4.058522] iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEBUG enabled [ 4.058740] iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEBUGFS disabled [ 4.058977] iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEVICE_TRACING disabled [ 4.059192] iwlwifi 0000:03:00.0: Detected Intel(R) Centrino(R) Advanced-N + WiMAX 6250 AGN, REV=0x84 [ 4.059890] iwlwifi 0000:03:00.0: L1 Enabled - LTR Disabled [ 4.125937] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs' [ 4.159127] microcode: CPU0 sig=0x106e5, pf=0x10, revision=0x5 [ 4.163835] microcode: CPU0 sig=0x106e5, pf=0x10, revision=0x5 [ 4.164658] microcode: CPU0 updated to revision 0x7, date = 2013-08-20 [ 4.169393] microcode: Microcode Update Driver: v2.00 , Peter Oruba [ 4.241769] usb 1-1: new high-speed USB device number 2 using ehci-pci [ 4.246786] kvm: VM_EXIT_LOAD_IA32_PERF_GLOBAL_CTRL does not work properly. Using workaround [ 4.357142] usb 1-1: New USB device found, idVendor=8087, idProduct=0020 [ 4.357361] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 4.357951] hub 1-1:1.0: USB hub found [ 4.358390] hub 1-1:1.0: 6 ports detected [ 4.365742] cfg80211: World regulatory domain updated: [ 4.365955] cfg80211: DFS Master region: unset [ 4.365992] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) [ 4.366575] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) [ 4.366982] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) [ 4.367368] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A) [ 4.367769] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A) [ 4.368158] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s) [ 4.368544] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s) [ 4.368954] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A) [ 4.369343] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A) [ 4.397050] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) f0:de:f1:3e:ba:af [ 4.397439] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection [ 4.398981] e1000e 0000:00:19.0 eth0: MAC: 9, PHY: 10, PBA No: A002FF-0FF [ 4.400770] ehci-pci 0000:00:1d.0: EHCI Host Controller [ 4.400992] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 4 [ 4.401398] ehci-pci 0000:00:1d.0: debug port 2 [ 4.405570] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported [ 4.426766] ehci-pci 0000:00:1d.0: irq 7, io mem 0xf2628400 [ 4.433258] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00 [ 4.433606] usb usb4: New USB device found, idVendor=1d6b, idProduct=0002 [ 4.433854] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 4.434239] usb usb4: Product: EHCI Host Controller [ 4.434447] usb usb4: Manufacturer: Linux 4.3.0-rc4-next-20151009-linux+ ehci_hcd [ 4.434856] usb usb4: SerialNumber: 0000:00:1d.0 [ 4.441478] hub 4-0:1.0: USB hub found [ 4.442757] hub 4-0:1.0: 3 ports detected [ 4.445016] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt [ 4.448702] ------------[ cut here ]------------ [ 4.448954] WARNING: CPU: 0 PID: 433 at lib/kobject.c:597 kobject_get+0x33/0x6a() [ 4.449340] kobject: ' ' (ffff88042cef0e58): is not initialized, yet kobject_get() is being called. [ 4.449746] Modules linked in: gpio_ich(+) coretemp kvm_intel kvm irqbypass microcode arc4 psmouse evdev video fbcon bitblit i2c_algo_bit softcursor font i2c_i801 iwldvm drm_kms_helper mac80211 cfbfillrect cfbimgblt cfbcopyarea ttm iwlwifi lpc_ich snd_hda_codec_conexant(+) mfd_core snd_hda_codec_generic firewire_ohci firewire_core rtc_cmos crc_itu_t sdhci_pci drm sdhci xhci_pci e1000e cfg80211 xhci_hcd snd_hda_intel mei_me ehci_pci mmc_core ptp agpgart mei snd_hda_codec pps_core ehci_hcd syscopyarea rfkill sysfillrect snd_hda_core sysimgblt fb_sys_fops snd_pcm fb snd_timer fbdev usbcore usb_common snd soundcore [ 4.457537] CPU: 0 PID: 433 Comm: systemd-udevd Tainted: G D W 4.3.0-rc4-next-20151009-linux+ #271 [ 4.457941] Hardware name: LENOVO 4318CTO/4318CTO, BIOS 6NET84WW (1.45 ) 10/03/2012 [ 4.458325] 0000000000000000 ffff88042c19fa40 ffffffff812ed22c ffff88042c19fa88 [ 4.458828] ffff88042c19fa78 ffffffff81056d88 ffffffff812eedb9 ffff88042cef0e58 [ 4.459313] ffff8804297bc000 0000000000000000 0000000000000003 ffff88042c19fae0 [ 4.459811] Call Trace: [ 4.460018] [] dump_stack+0x44/0x55 [ 4.460229] [] warn_slowpath_common+0x9f/0xb8 [ 4.460440] [] ? kobject_get+0x33/0x6a [ 4.460652] [] warn_slowpath_fmt+0x48/0x50 [ 4.460884] [] kobject_get+0x33/0x6a [ 4.461097] [] of_node_get+0x1b/0x21 [ 4.461310] [] of_gpiochip_add+0x6b/0xdd [ 4.461520] [] gpiochip_add+0x22b/0x3f5 [ 4.461749] [] ? wake_up_q+0x56/0x56 [ 4.461964] [] ichx_gpio_probe+0x2cb/0x351 [gpio_ich] [ 4.462177] [] platform_drv_probe+0x38/0x7d [ 4.462388] [] driver_probe_device+0xfc/0x26c [ 4.462601] [] __driver_attach+0x5d/0x7f [ 4.462828] [] ? driver_probe_device+0x26c/0x26c [ 4.463041] [] bus_for_each_dev+0x6d/0x85 [ 4.463251] [] driver_attach+0x1e/0x20 [ 4.463460] [] bus_add_driver+0xf1/0x1e9 [ 4.463669] [] ? 0xffffffffa0023000 [ 4.463896] [] driver_register+0x8e/0xca [ 4.464108] [] ? 0xffffffffa0023000 [ 4.464316] [] __platform_driver_register+0x36/0x38 [ 4.464529] [] ichx_gpio_driver_init+0x17/0x19 [gpio_ich] [ 4.464760] [] do_one_initcall+0xed/0x17a [ 4.464972] [] ? kfree+0xec/0x135 [ 4.465180] [] ? kmem_cache_alloc_trace+0x3d/0x16d [ 4.465391] [] ? do_init_module+0x27/0x1df [ 4.465602] [] do_init_module+0x5f/0x1df [ 4.465830] [] load_module+0x185a/0x1c00 [ 4.466043] [] ? vfs_read+0xf1/0xff [ 4.466253] [] ? copy_module_from_fd+0x8e/0xef [ 4.466465] [] SyS_finit_module+0x5e/0x6b [ 4.466674] [] ? SyS_finit_module+0x5e/0x6b [ 4.466904] [] entry_SYSCALL_64_fastpath+0x16/0x75 [ 4.467118] ---[ end trace dd833814130a8ac0 ]--- [ 4.467324] ------------[ cut here ]------------ [ 4.467532] WARNING: CPU: 0 PID: 433 at include/linux/kref.h:47 kobject_get+0x5d/0x6a() [ 4.467932] Modules linked in: gpio_ich(+) coretemp kvm_intel kvm irqbypass microcode arc4 psmouse evdev video fbcon bitblit i2c_algo_bit softcursor font i2c_i801 iwldvm drm_kms_helper mac80211 cfbfillrect cfbimgblt cfbcopyarea ttm iwlwifi lpc_ich snd_hda_codec_conexant(+) mfd_core snd_hda_codec_generic firewire_ohci firewire_core rtc_cmos crc_itu_t sdhci_pci drm sdhci xhci_pci e1000e cfg80211 xhci_hcd snd_hda_intel mei_me ehci_pci mmc_core ptp agpgart mei snd_hda_codec pps_core ehci_hcd syscopyarea rfkill sysfillrect snd_hda_core sysimgblt fb_sys_fops snd_pcm fb snd_timer fbdev usbcore usb_common snd soundcore [ 4.471127] CPU: 0 PID: 433 Comm: systemd-udevd Tainted: G D W 4.3.0-rc4-next-20151009-linux+ #271 [ 4.471513] Hardware name: LENOVO 4318CTO/4318CTO, BIOS 6NET84WW (1.45 ) 10/03/2012 [ 4.471913] 0000000000000000 ffff88042c19fa98 ffffffff812ed22c 0000000000000000 [ 4.472398] ffff88042c19fad0 ffffffff81056d88 ffffffff812eede3 ffff88042cef0e58 [ 4.472898] ffff8804297bc000 0000000000000000 0000000000000003 ffff88042c19fae0 [ 4.473381] Call Trace: [ 4.473585] [] dump_stack+0x44/0x55 [ 4.473813] [] warn_slowpath_common+0x9f/0xb8 [ 4.474024] [] ? kobject_get+0x5d/0x6a [ 4.474234] [] warn_slowpath_null+0x1a/0x1c [ 4.474444] [] kobject_get+0x5d/0x6a [ 4.474653] [] of_node_get+0x1b/0x21 [ 4.474880] [] of_gpiochip_add+0x6b/0xdd [ 4.475092] [] gpiochip_add+0x22b/0x3f5 [ 4.475303] [] ? wake_up_q+0x56/0x56 [ 4.475514] [] ichx_gpio_probe+0x2cb/0x351 [gpio_ich] [ 4.475743] [] platform_drv_probe+0x38/0x7d [ 4.475956] [] driver_probe_device+0xfc/0x26c [ 4.476167] [] __driver_attach+0x5d/0x7f [ 4.476376] [] ? driver_probe_device+0x26c/0x26c [ 4.476587] [] bus_for_each_dev+0x6d/0x85 [ 4.476814] [] driver_attach+0x1e/0x20 [ 4.477025] [] bus_add_driver+0xf1/0x1e9 [ 4.477235] [] ? 0xffffffffa0023000 [ 4.477444] [] driver_register+0x8e/0xca [ 4.477653] [] ? 0xffffffffa0023000 [ 4.477879] [] __platform_driver_register+0x36/0x38 [ 4.478094] [] ichx_gpio_driver_init+0x17/0x19 [gpio_ich] [ 4.478306] [] do_one_initcall+0xed/0x17a [ 4.478516] [] ? kfree+0xec/0x135 [ 4.478741] [] ? kmem_cache_alloc_trace+0x3d/0x16d [ 4.478954] [] ? do_init_module+0x27/0x1df [ 4.479164] [] do_init_module+0x5f/0x1df [ 4.479374] [] load_module+0x185a/0x1c00 [ 4.479584] [] ? vfs_read+0xf1/0xff [ 4.479811] [] ? copy_module_from_fd+0x8e/0xef [ 4.480024] [] SyS_finit_module+0x5e/0x6b [ 4.480234] [] ? SyS_finit_module+0x5e/0x6b [ 4.480445] [] entry_SYSCALL_64_fastpath+0x16/0x75 [ 4.480656] ---[ end trace dd833814130a8ac1 ]--- [ 4.480885] general protection fault: 0000 [#2] SMP [ 4.481144] Modules linked in: gpio_ich(+) coretemp kvm_intel kvm irqbypass microcode arc4 psmouse evdev video fbcon bitblit i2c_algo_bit softcursor font i2c_i801 iwldvm drm_kms_helper mac80211 cfbfillrect cfbimgblt cfbcopyarea ttm iwlwifi lpc_ich snd_hda_codec_conexant(+) mfd_core snd_hda_codec_generic firewire_ohci firewire_core rtc_cmos crc_itu_t sdhci_pci drm sdhci xhci_pci e1000e cfg80211 xhci_hcd snd_hda_intel mei_me ehci_pci mmc_core ptp agpgart mei snd_hda_codec pps_core ehci_hcd syscopyarea rfkill sysfillrect snd_hda_core sysimgblt fb_sys_fops snd_pcm fb snd_timer fbdev usbcore usb_common snd soundcore [ 4.484279] CPU: 0 PID: 433 Comm: systemd-udevd Tainted: G D W 4.3.0-rc4-next-20151009-linux+ #271 [ 4.484665] Hardware name: LENOVO 4318CTO/4318CTO, BIOS 6NET84WW (1.45 ) 10/03/2012 [ 4.485050] task: ffff88042c1cb500 ti: ffff88042c19c000 task.ti: ffff88042c19c000 [ 4.485432] RIP: 0010:[] [] __of_find_property+0x24/0x51 [ 4.485846] RSP: 0018:ffff88042c19fac8 EFLAGS: 00010006 [ 4.486058] RAX: 0000000000000000 RBX: 3a30303a30303030 RCX: 00000000ffffffff [ 4.486270] RDX: 0000000000000000 RSI: ffffffff818072f8 RDI: ffff88042cfcd290 [ 4.486482] RBP: ffff88042c19fae0 R08: 0000000000000000 R09: 0000000000000000 [ 4.486694] R10: ffffffffa0020de0 R11: 000000000001ffe0 R12: 0000000000000000 [ 4.486905] R13: ffffffff818072f8 R14: 0000000000000003 R15: ffffffffa0020f50 [ 4.487118] FS: 00007f75d64247c0(0000) GS:ffff88043fc00000(0000) knlGS:0000000000000000 [ 4.487502] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 4.487710] CR2: 00007f75d642e000 CR3: 000000042c1d9000 CR4: 00000000000006f0 [ 4.487921] Stack: [ 4.488123] ffff88042cfcd290 0000000000000286 0000000000000000 ffff88042c19fb10 [ 4.488608] ffffffff8144c2be ffffffff818072f8 0000000000000000 ffffffffa0020f50 [ 4.489090] ffff88042cfcd290 ffff88042c19fb40 ffffffff81314805 0000000000000003 [ 4.489573] Call Trace: [ 4.489777] [] of_find_property+0x3a/0x58 [ 4.489988] [] of_gpiochip_add+0x92/0xdd [ 4.490198] [] gpiochip_add+0x22b/0x3f5 [ 4.490409] [] ? wake_up_q+0x56/0x56 [ 4.490621] [] ichx_gpio_probe+0x2cb/0x351 [gpio_ich] [ 4.490834] [] platform_drv_probe+0x38/0x7d [ 4.491044] [] driver_probe_device+0xfc/0x26c [ 4.491254] [] __driver_attach+0x5d/0x7f [ 4.491464] [] ? driver_probe_device+0x26c/0x26c [ 4.491674] [] bus_for_each_dev+0x6d/0x85 [ 4.491884] [] driver_attach+0x1e/0x20 [ 4.492094] [] bus_add_driver+0xf1/0x1e9 [ 4.492303] [] ? 0xffffffffa0023000 [ 4.492513] [] driver_register+0x8e/0xca [ 4.492721] [] ? 0xffffffffa0023000 [ 4.492930] [] __platform_driver_register+0x36/0x38 [ 4.493143] [] ichx_gpio_driver_init+0x17/0x19 [gpio_ich] [ 4.493355] [] do_one_initcall+0xed/0x17a [ 4.493565] [] ? kfree+0xec/0x135 [ 4.493772] [] ? kmem_cache_alloc_trace+0x3d/0x16d [ 4.493983] [] ? do_init_module+0x27/0x1df [ 4.494194] [] do_init_module+0x5f/0x1df [ 4.494404] [] load_module+0x185a/0x1c00 [ 4.494614] [] ? vfs_read+0xf1/0xff [ 4.494823] [] ? copy_module_from_fd+0x8e/0xef [ 4.495035] [] SyS_finit_module+0x5e/0x6b [ 4.495244] [] ? SyS_finit_module+0x5e/0x6b [ 4.495457] [] entry_SYSCALL_64_fastpath+0x16/0x75 [ 4.495668] Code: 5c 41 5d 41 5e 5d c3 66 66 66 66 90 31 c0 48 85 ff 74 44 55 48 89 e5 41 55 49 89 f5 41 54 49 89 d4 53 48 8b 5f 30 48 85 db 74 23 <48> 8b 3b 4c 89 ee e8 c6 62 ea ff 85 c0 75 0e 4d 85 e4 74 0f 8b [ 4.497905] RIP [] __of_find_property+0x24/0x51 [ 4.498143] RSP [ 4.498349] ---[ end trace dd833814130a8ac2 ]--- [ 4.504085] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11 [ 4.527577] systemd-udevd[424]: Process 'net.sh wlan0 start' failed with exit code 1. [ 4.533475] systemd-udevd[432]: Process 'net.sh eth0 start' failed with exit code 1. [ 4.554099] systemd-udevd[381]: worker [433] terminated by signal 11 (Segmentation fault) [ 4.554492] systemd-udevd[381]: worker [433] failed while handling '/devices/pci0000:00/0000:00:1f.0/gpio_ich.1.auto' [ 4.560860] firewire_core 0000:17:00.3: created device fw0: GUID f0def1ff3ebaafff, S400 [ 4.676723] usb 1-1.1: new low-speed USB device number 3 using ehci-pci [ 4.765292] usb 1-1.1: New USB device found, idVendor=0765, idProduct=5001 [ 4.765509] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 4.769716] usb 4-1: new high-speed USB device number 2 using ehci-pci [ 4.797719] hidraw: raw HID events driver (C) Jiri Kosina [ 4.804288] usbcore: registered new interface driver usbhid [ 4.804502] usbhid: USB HID core driver [ 4.810456] hid-generic 0003:0765:5001.0001: hiddev0,hidraw0: USB HID v1.00 Device [HID 0765:5001] on usb-0000:00:1a.0-1.1/input0 [ 4.841710] usb 1-1.3: new full-speed USB device number 4 using ehci-pci [ 4.899804] usb 4-1: New USB device found, idVendor=8087, idProduct=0020 [ 4.900042] usb 4-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 4.901069] hub 4-1:1.0: USB hub found [ 4.901478] hub 4-1:1.0: 8 ports detected [ 4.928180] usb 1-1.3: New USB device found, idVendor=147e, idProduct=2016 [ 4.928400] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 4.928818] usb 1-1.3: Product: Biometric Coprocessor [ 4.929028] usb 1-1.3: Manufacturer: UPEK [ 5.002714] usb 1-1.6: new high-speed USB device number 5 using ehci-pci [ 5.008942] psmouse serio1: synaptics: queried max coordinates: x [..5888], y [..4820] [ 5.091849] tun: Universal TUN/TAP device driver, 1.6 [ 5.092061] tun: (C) 1999-2004 Max Krasnyansky [ 5.094196] usb 1-1.6: New USB device found, idVendor=17ef, idProduct=480f [ 5.094415] usb 1-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 5.094827] usb 1-1.6: Product: Integrated Camera [ 5.095038] usb 1-1.6: Manufacturer: Chicony Electronics Co., Ltd. [ 5.099475] psmouse serio1: synaptics: Touchpad model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd047b3/0xb40000/0xa0000/0x0, board id: 0, fw id: 578367 [ 5.099906] psmouse serio1: synaptics: serio: Synaptics pass-through port at isa0060/serio1/input0 [ 5.156709] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input3 [ 5.177692] usb 4-1.3: new high-speed USB device number 3 using ehci-pci [ 5.195707] Linux video capture interface: v2.00 [ 5.223319] uvcvideo: Found UVC 1.00 device Integrated Camera (17ef:480f) [ 5.228066] input: Integrated Camera as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6/1-1.6:1.0/input/input5 [ 5.229125] usbcore: registered new interface driver uvcvideo [ 5.229338] USB Video Class driver (1.1.1) [ 5.259241] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this. [ 5.262534] Bridge firewalling registered [ 5.263718] usb 4-1.3: New USB device found, idVendor=8086, idProduct=0187 [ 5.263936] usb 4-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 5.264320] usb 4-1.3: Product: Intel(R) Centrino(R) Advanced-N + WiMAX 6250 [ 5.264532] usb 4-1.3: Manufacturer: Intel(R) Corporation [ 5.340683] usb 4-1.4: new high-speed USB device number 4 using ehci-pci [ 5.428840] usb 4-1.4: config 1 has an invalid interface number: 1 but max is 0 [ 5.429229] usb 4-1.4: config 1 has no interface number 0 [ 5.431611] usb 4-1.4: New USB device found, idVendor=05c6, idProduct=9204 [ 5.431849] usb 4-1.4: New USB device strings: Mfr=3, Product=2, SerialNumber=0 [ 5.432235] usb 4-1.4: Product: Qualcomm Gobi 2000 [ 5.432443] usb 4-1.4: Manufacturer: Qualcomm Incorporated [ 5.497947] usbcore: registered new interface driver usbserial [ 5.498724] usb 4-1.8: new full-speed USB device number 5 using ehci-pci [ 5.500941] usbcore: registered new interface driver usbserial_generic [ 5.501843] usbserial: USB Serial support registered for generic [ 5.509010] usbcore: registered new interface driver qcserial [ 5.510044] usbserial: USB Serial support registered for Qualcomm USB modem [ 5.511031] qcserial 4-1.4:1.1: Qualcomm USB modem converter detected [ 5.511523] usb 4-1.4: Qualcomm USB modem converter now attached to ttyUSB0 [ 5.586103] usb 4-1.8: New USB device found, idVendor=056a, idProduct=00e2 [ 5.586387] usb 4-1.8: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 5.586864] usb 4-1.8: Product: ISD-V4 [ 5.587073] usb 4-1.8: Manufacturer: Tablet [ 5.645372] BTRFS info (device sdb3): turning on discard [ 5.645677] BTRFS info (device sdb3): disk space caching is enabled [ 5.785120] input: Wacom ISDv4 E2 Finger as /devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.8/4-1.8:1.0/0003:056A:00E2.0002/input/input7 [ 5.787199] wacom 0003:056A:00E2.0002: hidraw1: USB HID v1.11 Mouse [Tablet ISD-V4] on usb-0000:00:1d.0-1.8/input0 [ 6.177108] EXT4-fs (sda3): mounted filesystem with writeback data mode. Opts: data=writeback,user_xattr [ 6.300631] EXT4-fs (sda4): mounted filesystem with writeback data mode. Opts: (null) [ 6.316854] EXT4-fs (zram0): mounted filesystem without journal. Opts: barrier=0,commit=240 [ 6.319597] EXT4-fs (zram1): mounted filesystem without journal. Opts: barrier=0,commit=240 [ 6.989531] snd_hda_intel 0000:01:00.1: azx_get_response timeout, switching to polling mode: last cmd=0x300f0000 [ 7.282952] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/0000:01:00.1/sound/card1/input9 [ 7.283464] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/0000:01:00.1/sound/card1/input10 [ 7.284014] input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/0000:01:00.1/sound/card1/input11 [ 7.284536] input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:03.0/0000:01:00.1/sound/card1/input12 [ 8.781321] usb 4-1.4: USB disconnect, device number 4 [ 8.781710] qcserial ttyUSB0: Qualcomm USB modem converter now disconnected from ttyUSB0 [ 8.782115] qcserial 4-1.4:1.1: device disconnected [ 9.726303] usb 4-1.4: new high-speed USB device number 6 using ehci-pci [ 9.813892] usb 4-1.4: New USB device found, idVendor=05c6, idProduct=9205 [ 9.814109] usb 4-1.4: New USB device strings: Mfr=3, Product=2, SerialNumber=0 [ 9.814507] usb 4-1.4: Product: Qualcomm Gobi 2000 [ 9.814717] usb 4-1.4: Manufacturer: Qualcomm Incorporated [ 9.817947] qcserial 4-1.4:1.1: Qualcomm USB modem converter detected [ 9.818259] usb 4-1.4: Qualcomm USB modem converter now attached to ttyUSB0 [ 9.819231] qcserial 4-1.4:1.2: Qualcomm USB modem converter detected [ 9.819568] usb 4-1.4: Qualcomm USB modem converter now attached to ttyUSB1 [ 9.820345] qcserial 4-1.4:1.3: Qualcomm USB modem converter detected [ 9.820652] usb 4-1.4: Qualcomm USB modem converter now attached to ttyUSB2 [ 10.553641] psmouse serio2: trackpoint: IBM TrackPoint firmware: 0x0e, buttons: 3/3 [ 10.841876] input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/serio2/input/input4 [ 14.433577] systemd-udevd[426]: Process '/usr/local/sbin/doBackup.sh' failed with exit code 127. [ 16.878894] Adding 16347080k swap on /media/swapfile. Priority:-1 extents:212 across:196689920k FS [ 18.048248] Bluetooth: Core ver 2.20 [ 18.048479] NET: Registered protocol family 31 [ 18.048714] Bluetooth: HCI device and connection manager initialized [ 18.051672] Bluetooth: HCI socket layer initialized [ 18.051887] Bluetooth: L2CAP socket layer initialized [ 18.052102] Bluetooth: SCO socket layer initialized [ 18.060746] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 18.060959] Bluetooth: BNEP filters: protocol multicast [ 18.061170] Bluetooth: BNEP socket layer initialized [ 18.403762] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 19.584680] device eth0 entered promiscuous mode [ 19.597774] device dummy0 entered promiscuous mode [ 19.606123] device xenbr0 entered promiscuous mode [ 19.609172] xenbr0: port 2(dummy0) entered forwarding state [ 19.609398] xenbr0: port 2(dummy0) entered forwarding state [ 19.643803] systemd-udevd[424]: Process 'net.sh xenbr0 start' failed with exit code 1. [ 21.985454] iwlwifi 0000:03:00.0: L1 Enabled - LTR Disabled [ 21.986081] iwlwifi 0000:03:00.0: L1 Enabled - LTR Disabled [ 21.987308] iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0 [ 22.222432] iwlwifi 0000:03:00.0: L1 Enabled - LTR Disabled [ 22.223086] iwlwifi 0000:03:00.0: L1 Enabled - LTR Disabled [ 22.223701] iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0 [ 22.322039] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 24.968474] wlan0: authenticate with 04:a1:51:b8:7b:e5 [ 24.972227] wlan0: send auth to 04:a1:51:b8:7b:e5 (try 1/3) [ 25.038717] wlan0: authenticated [ 25.040044] wlan0: associate with 04:a1:51:b8:7b:e5 (try 1/3) [ 25.042252] wlan0: RX AssocResp from 04:a1:51:b8:7b:e5 (capab=0x11 status=0 aid=1) [ 25.046885] wlan0: associated [ 25.047137] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 25.051153] cfg80211: Regulatory domain changed to country: US [ 25.051368] cfg80211: DFS Master region: FCC [ 25.051403] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) [ 25.051986] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 3000 mBm), (N/A) [ 25.052407] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 1700 mBm), (N/A) [ 25.052797] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2300 mBm), (0 s) [ 25.053199] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2300 mBm), (0 s) [ 25.053586] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 3000 mBm), (N/A) [ 25.053970] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 4000 mBm), (N/A) [ 34.633233] xenbr0: port 2(dummy0) entered forwarding state [ 63.480035] ata2.00: configured for UDMA/133 [ 63.480249] ata2: EH complete [ 65.181739] systemd-udevd[381]: seq 1169 '/devices/pci0000:00/0000:00:1f.0/iTCO_wdt.0.auto' is taking a long time