[ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Initializing cgroup subsys cpuacct [ 0.000000] Linux version 4.4.10-229312-gca7e700 (jramirez@igloo) (gcc version 5.1.1 20150608 (Linaro GCC 5.1-2015.08) ) #10 SMP PREEMPT Tue May 31 09:09:43 CEST 2016 [ 0.000000] Boot CPU: AArch64 Processor [410fd033] [ 0.000000] efi: Getting EFI parameters from FDT: [ 0.000000] EFI v2.40 by Linaro HiKey EFI Mar 1 2016 05:02:13 [ 0.000000] efi: [ 0.000000] cma: Reserved 64 MiB at 0x0000000039800000 [ 0.000000] On node 0 totalpages: 253197 [ 0.000000] DMA zone: 3968 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 253197 pages, LIFO batch:31 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.0 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: MIGRATE_INFO_TYPE not supported. [ 0.000000] PERCPU: Embedded 15 pages/cpu @ffffffc03df3a000 s30336 r0 d31104 u61440 [ 0.000000] pcpu-alloc: s30336 r0 d31104 u61440 alloc=15*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [0] 4 [0] 5 [0] 6 [0] 7 [ 0.000000] Detected VIPT I-cache on CPU0 [ 0.000000] CPU features: enabling workaround for ARM erratum 845719 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 249229 [ 0.000000] Kernel command line: BOOT_IMAGE=/Image console=ttyFIQ0 androidboot.console=ttyFIQ0 androidboot.hardware=hikey firmware_class.path=/system/etc/firmware efi=noruntime androidboot.selinux=permissive [ 0.000000] log_buf_len individual max cpu contribution: 4096 bytes [ 0.000000] log_buf_len total cpu_extra contributions: 28672 bytes [ 0.000000] log_buf_len min size: 16384 bytes [ 0.000000] log_buf_len: 65536 bytes [ 0.000000] early log buf free: 14464(88%) [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes) [ 0.000000] software IO TLB [mem 0x31000000-0x35000000] (64MB) mapped at [ffffffc031000000-ffffffc034ffffff] [ 0.000000] Memory: 842240K/1012788K available (11684K kernel code, 1262K rwdata, 3620K rodata, 852K init, 547K bss, 105012K reserved, 65536K cma-reserved) [ 0.000000] Virtual kernel memory layout: [ 0.000000] vmalloc : 0xffffff8000000000 - 0xffffffbdbfff0000 ( 246 GB) [ 0.000000] vmemmap : 0xffffffbdc0000000 - 0xffffffbfc0000000 ( 8 GB maximum) [ 0.000000] 0xffffffbdc0000000 - 0xffffffbdc0f80000 ( 15 MB actual) [ 0.000000] fixed : 0xffffffbffa7fd000 - 0xffffffbffac00000 ( 4108 KB) [ 0.000000] PCI I/O : 0xffffffbffae00000 - 0xffffffbffbe00000 ( 16 MB) [ 0.000000] modules : 0xffffffbffc000000 - 0xffffffc000000000 ( 64 MB) [ 0.000000] memory : 0xffffffc000000000 - 0xffffffc03e000000 ( 992 MB) [ 0.000000] .init : 0xffffffc000f74000 - 0xffffffc001049000 ( 852 KB) [ 0.000000] .text : 0xffffffc000080000 - 0xffffffc000f74000 ( 15312 KB) [ 0.000000] .data : 0xffffffc00105c000 - 0xffffffc001197a00 ( 1263 KB) [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] Build-time adjustment of leaf fanout to 64. [ 0.000000] RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=8. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=8 [ 0.000000] NR_IRQS:64 nr_irqs:64 0 [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] SYSPLL: syspll PM status: 0x30007808 [ 0.000000] SYSPLL: syspll is read: l: 0x8000, u: 0x46F5 [ 0.000000] SYSPLL: syspll is read: 0x46F58000, 1190494208 [ 0.000000] SYSPLL: set syspll medpll: 1190400000 [ 0.000000] SYSPLL: modified fix_rate[8], id=9, f=1190400000 [ 0.000000] SYSPLL: modified fix_rate[9], id=10, f=1190400000 [ 0.000000] Architected cp15 timer(s) running at 1.20MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x11b661f8e, max_idle_ns: 1763180809113 ns [ 0.000004] sched_clock: 56 bits at 1200kHz, resolution 833ns, wraps every 4398046510838ns [ 0.000095] clocksource: arm,sp804: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 99544814920 ns [ 0.000104] sched_clock: 32 bits at 19MHz, resolution 52ns, wraps every 111848106981ns [ 0.000711] Console: colour dummy device 80x25 [ 0.000732] Calibrating delay loop (skipped), value calculated using timer frequency.. 2.40 BogoMIPS (lpj=4800) [ 0.000743] pid_max: default: 32768 minimum: 301 [ 0.000869] Security Framework initialized [ 0.000879] SELinux: Initializing. [ 0.000949] SELinux: Starting in permissive mode [ 0.000999] Mount-cache hash table entries: 2048 (order: 2, 16384 bytes) [ 0.001008] Mountpoint-cache hash table entries: 2048 (order: 2, 16384 bytes) [ 0.001617] Initializing cgroup subsys io [ 0.001634] Initializing cgroup subsys memory [ 0.001689] Initializing cgroup subsys devices [ 0.001701] Initializing cgroup subsys freezer [ 0.001711] Initializing cgroup subsys hugetlb [ 0.001725] Initializing cgroup subsys debug [ 0.001769] ftrace: allocating 39129 entries in 153 pages [ 0.067287] sched-energy: Sched-energy-costs installed from DT [ 0.067305] CPU0: update cpu_capacity 1024 [ 0.067341] EFI runtime services will be disabled. [ 0.067364] ASID allocator initialised with 65536 entries [ 0.102943] Detected VIPT I-cache on CPU1 [ 0.102996] CPU1: update cpu_capacity 1024 [ 0.103000] CPU1: Booted secondary processor [410fd033] [ 0.114879] Detected VIPT I-cache on CPU2 [ 0.114903] CPU2: update cpu_capacity 1024 [ 0.114906] CPU2: Booted secondary processor [410fd033] [ 0.126913] Detected VIPT I-cache on CPU3 [ 0.126934] CPU3: update cpu_capacity 1024 [ 0.126937] CPU3: Booted secondary processor [410fd033] [ 0.139007] Detected VIPT I-cache on CPU4 [ 0.139050] CPU4: update cpu_capacity 1024 [ 0.139053] CPU4: Booted secondary processor [410fd033] [ 0.150970] Detected VIPT I-cache on CPU5 [ 0.150992] CPU5: update cpu_capacity 1024 [ 0.150994] CPU5: Booted secondary processor [410fd033] [ 0.163006] Detected VIPT I-cache on CPU6 [ 0.163027] CPU6: update cpu_capacity 1024 [ 0.163030] CPU6: Booted secondary processor [410fd033] [ 0.175045] Detected VIPT I-cache on CPU7 [ 0.175068] CPU7: update cpu_capacity 1024 [ 0.175071] CPU7: Booted secondary processor [410fd033] [ 0.175145] Brought up 8 CPUs [ 0.175196] SMP: Total of 8 processors activated. [ 0.175207] CPU: All CPU(s) started at EL2 [ 0.175261] alternatives: patching kernel code [ 0.185344] DMI not present or invalid. [ 0.185682] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.188050] xor: measuring software checksum speed [ 0.226928] 8regs : 2367.000 MB/sec [ 0.266982] 8regs_prefetch: 2105.000 MB/sec [ 0.307036] 32regs : 2620.000 MB/sec [ 0.347089] 32regs_prefetch: 2171.000 MB/sec [ 0.347096] xor: using function: 32regs (2620.000 MB/sec) [ 0.347120] pinctrl core: initialized pinctrl subsystem [ 0.348542] NET: Registered protocol family 16 [ 0.359144] cpuidle: using governor ladder [ 0.363295] cpuidle: using governor menu [ 0.363317] Registered FIQ tty driver [ 0.363479] serial_debugger: uart overlay applied [ 0.363714] vdso: 2 pages (1 code @ ffffffc001061000, 1 data @ ffffffc001060000) [ 0.363741] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.364800] DMA: preallocated 256 KiB pool for atomic allocations [ 0.364887] Serial: AMBA PL011 UART driver [ 0.366819] f8015000.uart: ttyAMA0 at MMIO 0xf8015000 (irq = 7, base_baud = 0) is a PL011 rev2 [ 0.367248] uart-pl011 f7111000.uart: could not find pctldev for node /soc/pinmux@f7010000/uart1_pmx_func, deferring probe [ 0.367532] uart-pl011 f7112000.uart: could not find pctldev for node /soc/pinmux@f7010000/uart2_pmx_func, deferring probe [ 0.374190] hi6220-mbox f7510000.mailbox: Mailbox enabled [ 0.377401] console [pstore-1] enabled [ 0.377588] pstore: Registered ramoops as persistent store backend [ 0.377599] ramoops: attached 0x100000@0x21f00000, ecc: 0/0 [ 0.483529] raid6: int64x1 gen() 461 MB/s [ 0.551534] raid6: int64x1 xor() 470 MB/s [ 0.619580] raid6: int64x2 gen() 692 MB/s [ 0.687634] raid6: int64x2 xor() 607 MB/s [ 0.755721] raid6: int64x4 gen() 1008 MB/s [ 0.823834] raid6: int64x4 xor() 748 MB/s [ 0.891930] raid6: int64x8 gen() 1166 MB/s [ 0.959991] raid6: int64x8 xor() 748 MB/s [ 1.028060] raid6: neonx1 gen() 747 MB/s [ 1.096179] raid6: neonx1 xor() 765 MB/s [ 1.164288] raid6: neonx2 gen() 1156 MB/s [ 1.232347] raid6: neonx2 xor() 1014 MB/s [ 1.300405] raid6: neonx4 gen() 1527 MB/s [ 1.368484] raid6: neonx4 xor() 1178 MB/s [ 1.436579] raid6: neonx8 gen() 1682 MB/s [ 1.504651] raid6: neonx8 xor() 1234 MB/s [ 1.504659] raid6: using algorithm neonx8 gen() 1682 MB/s [ 1.504667] raid6: .... xor() 1234 MB/s, rmw enabled [ 1.504675] raid6: using intx1 recovery algorithm [ 1.504992] ACPI: Interpreter disabled. [ 1.505473] vgaarb: loaded [ 1.505813] SCSI subsystem initialized [ 1.506046] libata version 3.00 loaded. [ 1.506134] ssp-pl022 f7106000.spi: could not find pctldev for node /soc/pinmux@f7010000/spi0_pmx_func, deferring probe [ 1.506410] usbcore: registered new interface driver usbfs [ 1.506458] usbcore: registered new interface driver hub [ 1.506582] usbcore: registered new device driver usb [ 1.506813] i2c_designware f7100000.i2c: could not find pctldev for node /soc/pinmux@f7010000/i2c0_pmx_func, deferring probe [ 1.506849] i2c_designware f7101000.i2c: could not find pctldev for node /soc/pinmux@f7010000/i2c1_pmx_func, deferring probe [ 1.506880] i2c_designware f7102000.i2c: could not find pctldev for node /soc/pinmux@f7010000/i2c2_pmx_func, deferring probe [ 1.506979] Linux video capture interface: v2.00 [ 1.507222] dmi: Firmware registration failed. [ 1.507675] Advanced Linux Sound Architecture Driver Initialized. [ 1.508262] Bluetooth: Core ver 2.21 [ 1.508316] NET: Registered protocol family 31 [ 1.508324] Bluetooth: HCI device and connection manager initialized [ 1.508340] Bluetooth: HCI socket layer initialized [ 1.508353] Bluetooth: L2CAP socket layer initialized [ 1.508393] Bluetooth: SCO socket layer initialized [ 1.508849] NetLabel: Initializing [ 1.508860] NetLabel: domain hash size = 128 [ 1.508867] NetLabel: protocols = UNLABELED CIPSOv4 [ 1.508919] NetLabel: unlabeled traffic allowed by default [ 1.509325] clocksource: Switched to clocksource arch_sys_counter [ 1.606014] pnp: PnP ACPI: disabled [ 1.612236] NET: Registered protocol family 2 [ 1.612864] TCP established hash table entries: 8192 (order: 4, 65536 bytes) [ 1.612949] TCP bind hash table entries: 8192 (order: 5, 131072 bytes) [ 1.613084] TCP: Hash tables configured (established 8192 bind 8192) [ 1.613147] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 1.613176] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 1.613538] NET: Registered protocol family 1 [ 1.613930] RPC: Registered named UNIX socket transport module. [ 1.613938] RPC: Registered udp transport module. [ 1.613945] RPC: Registered tcp transport module. [ 1.613952] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 1.613978] PCI: CLS 0 bytes, default 128 [ 1.614273] Trying to unpack rootfs image as initramfs... [ 1.676276] Freeing initrd memory: 1520K (ffffffc03786e000 - ffffffc0379ea000) [ 1.676985] kvm [1]: interrupt-controller@f6804000 IRQ6 [ 1.677227] kvm [1]: timer IRQ3 [ 1.677247] kvm [1]: Hyp mode initialized successfully [ 1.680390] futex hash table entries: 2048 (order: 6, 262144 bytes) [ 1.680528] audit: initializing netlink subsys (disabled) [ 1.680607] audit: type=2000 audit(1.631:1): initialized [ 1.681351] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 1.681824] VFS: Disk quotas dquot_6.6.0 [ 1.681887] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 1.682265] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 1.682694] NFS: Registering the id_resolver key type [ 1.682736] Key type id_resolver registered [ 1.682744] Key type id_legacy registered [ 1.682891] fuse init (API version 7.23) [ 1.683116] 9p: Installing v9fs 9p2000 file system support [ 1.683260] SELinux: Registering netfilter hooks [ 1.686675] io scheduler noop registered [ 1.686758] io scheduler cfq registered (default) [ 1.688531] pinctrl-single f7010000.pinmux: 159 pins at pa ffffff80000b8000 size 636 [ 1.689077] pinctrl-single f7010800.pinmux: 163 pins at pa ffffff80000ba800 size 652 [ 1.689348] pinctrl-single f8001800.pinmux: 30 pins at pa ffffff80000bc800 size 120 [ 1.689792] pl061_gpio f8011000.gpio: PL061 GPIO chip @0x00000000f8011000 registered [ 1.690014] pl061_gpio f8012000.gpio: PL061 GPIO chip @0x00000000f8012000 registered [ 1.690226] pl061_gpio f8013000.gpio: PL061 GPIO chip @0x00000000f8013000 registered [ 1.690452] pl061_gpio f8014000.gpio: PL061 GPIO chip @0x00000000f8014000 registered [ 1.690669] pl061_gpio f7020000.gpio: PL061 GPIO chip @0x00000000f7020000 registered [ 1.690899] pl061_gpio f7021000.gpio: PL061 GPIO chip @0x00000000f7021000 registered [ 1.691107] pl061_gpio f7022000.gpio: PL061 GPIO chip @0x00000000f7022000 registered [ 1.691330] pl061_gpio f7023000.gpio: PL061 GPIO chip @0x00000000f7023000 registered [ 1.691543] pl061_gpio f7024000.gpio: PL061 GPIO chip @0x00000000f7024000 registered [ 1.691763] pl061_gpio f7025000.gpio: PL061 GPIO chip @0x00000000f7025000 registered [ 1.691979] pl061_gpio f7026000.gpio: PL061 GPIO chip @0x00000000f7026000 registered [ 1.692196] pl061_gpio f7027000.gpio: PL061 GPIO chip @0x00000000f7027000 registered [ 1.692410] pl061_gpio f7028000.gpio: PL061 GPIO chip @0x00000000f7028000 registered [ 1.692623] pl061_gpio f7029000.gpio: PL061 GPIO chip @0x00000000f7029000 registered [ 1.692834] pl061_gpio f702a000.gpio: PL061 GPIO chip @0x00000000f702a000 registered [ 1.693065] pl061_gpio f702b000.gpio: PL061 GPIO chip @0x00000000f702b000 registered [ 1.693276] pl061_gpio f702c000.gpio: PL061 GPIO chip @0x00000000f702c000 registered [ 1.693585] pl061_gpio f702d000.gpio: PL061 GPIO chip @0x00000000f702d000 registered [ 1.693802] pl061_gpio f702e000.gpio: PL061 GPIO chip @0x00000000f702e000 registered [ 1.694016] pl061_gpio f702f000.gpio: PL061 GPIO chip @0x00000000f702f000 registered [ 1.697397] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 1.698664] [drm] Initialized drm 1.1.0 20060810 [ 1.699692] [drm] wait for external HDMI bridge driver. [ 1.699742] Mali<2>: Inserting Mali v800 device driver. [ 1.699755] Mali<2>: Compiled: May 30 2016, time: 18:28:30. [ 1.699766] Mali<2>: Driver revision: -v3.7-rc5-229312-gca7e700 [ 1.699776] Mali<2>: mali_module_init() registering driver [ 1.699880] Mali<2>: mali_probe(): Called for platform device 3f100000.mali [ 1.700314] Mali<2>: Mali SWAP: Swap out threshold vaule is 60M [ 1.700344] Mali<2>: Mali memory settings (shared: 0x40000000) [ 1.700356] Mali<2>: Using device defined frame buffer settings (0x00708000@0x3F100000) [ 1.700368] Mali<2>: Memory Validator installed for Mali physical address base=0x3F100000, size=0x00708000 [ 1.700386] Mali<2>: Mali PM domain: Creating Mali PM domain (mask=0x00001000) [ 1.700399] Mali<2>: Broadcast: Creating Mali Broadcast unit: Mali_Broadcast [ 1.700426] Mali<2>: Mali PP: Creating Mali PP core: Mali_PP0 [ 1.700436] Mali<2>: Mali PP: Base address of PP core: 0xf4088000 [ 1.700553] Mali<2>: Found Mali GPU Mali-450 MP r0p0 [ 1.701070] Mali<2>: Mali DLBU: Initializing [ 1.701119] Mali<2>: Mali L2 cache: Created Mali_L2: 8K, 4-way, 64byte cache line, 128bit external bus [ 1.701140] Mali<2>: Mali L2 cache: Created Mali_L2: 128K, 4-way, 64byte cache line, 128bit external bus [ 1.701174] Mali<2>: Mali MMU: Creating Mali MMU: Mali_GP_MMU [ 1.701213] Mali<2>: mali_mmu_probe_irq_acknowledge: intstat 0x3 [ 1.701227] Mali<2>: Probe: Page fault detect: PASSED [ 1.701235] Mali<2>: Probe: Bus read error detect: PASSED [ 1.701269] Mali<2>: Mali GP: Creating Mali GP core: Mali_GP [ 1.701348] Mali<2>: Mali MMU: Creating Mali MMU: Mali_PP0_MMU [ 1.701385] Mali<2>: mali_mmu_probe_irq_acknowledge: intstat 0x3 [ 1.701395] Mali<2>: Probe: Page fault detect: PASSED [ 1.701403] Mali<2>: Probe: Bus read error detect: PASSED [ 1.701434] Mali<2>: Mali PP: Creating Mali PP core: Mali_PP0 [ 1.701446] Mali<2>: Mali PP: Base address of PP core: 0xf4088000 [ 1.701501] Mali<2>: Mali MMU: Creating Mali MMU: Mali_PP1_MMU [ 1.701539] Mali<2>: mali_mmu_probe_irq_acknowledge: intstat 0x3 [ 1.701548] Mali<2>: Probe: Page fault detect: PASSED [ 1.701556] Mali<2>: Probe: Bus read error detect: PASSED [ 1.701587] Mali<2>: Mali PP: Creating Mali PP core: Mali_PP1 [ 1.701598] Mali<2>: Mali PP: Base address of PP core: 0xf408a000 [ 1.701663] Mali<2>: Mali MMU: Creating Mali MMU: Mali_PP2_MMU [ 1.701699] Mali<2>: mali_mmu_probe_irq_acknowledge: intstat 0x3 [ 1.701709] Mali<2>: Probe: Page fault detect: PASSED [ 1.701717] Mali<2>: Probe: Bus read error detect: PASSED [ 1.701747] Mali<2>: Mali PP: Creating Mali PP core: Mali_PP2 [ 1.701759] Mali<2>: Mali PP: Base address of PP core: 0xf408c000 [ 1.701814] Mali<2>: Mali MMU: Creating Mali MMU: Mali_PP3_MMU [ 1.701851] Mali<2>: mali_mmu_probe_irq_acknowledge: intstat 0x3 [ 1.701860] Mali<2>: Probe: Page fault detect: PASSED [ 1.701868] Mali<2>: Probe: Bus read error detect: PASSED [ 1.701898] Mali<2>: Mali PP: Creating Mali PP core: Mali_PP3 [ 1.701910] Mali<2>: Mali PP: Base address of PP core: 0xf408e000 [ 1.701964] Mali<2>: Starting new virtual group for MMU PP broadcast core Mali_PP_MMU_Broadcast [ 1.701976] Mali<2>: Mali DLBU: Creating Mali dynamic load balancing unit: Mali_DLBU [ 1.701994] Mali<2>: Broadcast: Creating Mali Broadcast unit: Mali_Broadcast [ 1.702017] Mali<2>: Mali MMU: Creating Mali MMU: Mali_PP_MMU_Broadcast [ 1.702030] Mali<2>: Mali PP: Creating Mali PP core: Mali_PP_Broadcast [ 1.702040] Mali<2>: Mali PP: Base address of PP core: 0xf4096000 [ 1.702091] Mali<2>: 4+0 PP cores initialized [ 1.702115] Mali<2>: Mali GPU Timer: 50 [ 1.702126] Mali<2>: Mali GPU Utilization: No platform utilization handler installed [ 1.702983] Mali<2>: mali_probe(): Successfully initialized driver for platform device 3f100000.mali [ 1.703076] Mali: Mali device driver loaded [ 1.714279] brd: module loaded [ 1.720008] loop: module loaded [ 1.720365] (stk) :sysfs entries created [ 1.720466] (hci_tty): inside hci_tty_init [ 1.720584] (hci_tty): allocated 251, 0 [ 1.724919] tun: Universal TUN/TAP device driver, 1.6 [ 1.724937] tun: (C) 1999-2004 Max Krasnyansky [ 1.725477] PPP generic driver version 2.4.2 [ 1.725607] PPP BSD Compression module registered [ 1.725620] PPP Deflate Compression module registered [ 1.725651] PPP MPPE Compression module registered [ 1.725761] pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver [ 1.725810] usbcore: registered new interface driver pegasus [ 1.725857] usbcore: registered new interface driver rtl8150 [ 1.725908] usbcore: registered new interface driver r8152 [ 1.725956] usbcore: registered new interface driver asix [ 1.726003] usbcore: registered new interface driver ax88179_178a [ 1.726049] usbcore: registered new interface driver cdc_ether [ 1.726100] usbcore: registered new interface driver dm9601 [ 1.726155] usbcore: registered new interface driver CoreChips [ 1.726205] usbcore: registered new interface driver smsc75xx [ 1.726263] usbcore: registered new interface driver smsc95xx [ 1.726315] usbcore: registered new interface driver net1080 [ 1.726370] usbcore: registered new interface driver plusb [ 1.726421] usbcore: registered new interface driver cdc_subset [ 1.726476] usbcore: registered new interface driver zaurus [ 1.726527] usbcore: registered new interface driver MOSCHIP usb-ethernet driver [ 1.726599] usbcore: registered new interface driver cdc_ncm [ 1.726890] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.726905] ehci-pci: EHCI PCI platform driver [ 1.726957] ehci-platform: EHCI generic platform driver [ 1.727083] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.727116] ohci-pci: OHCI PCI platform driver [ 1.727170] ohci-platform: OHCI generic platform driver [ 1.727329] usbcore: registered new interface driver cdc_acm [ 1.727337] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters [ 1.727386] usbcore: registered new interface driver usb-storage [ 1.727491] usbcore: registered new interface driver usbserial [ 1.727540] usbcore: registered new interface driver usbserial_generic [ 1.727589] usbserial: USB Serial support registered for generic [ 1.727642] usbcore: registered new interface driver ftdi_sio [ 1.727688] usbserial: USB Serial support registered for FTDI USB Serial Device [ 1.727736] usbcore: registered new interface driver option [ 1.727779] usbserial: USB Serial support registered for GSM modem (1-port) [ 1.727829] usbcore: registered new interface driver pl2303 [ 1.727876] usbserial: USB Serial support registered for pl2303 [ 1.727928] usbcore: registered new interface driver qcserial [ 1.727973] usbserial: USB Serial support registered for Qualcomm USB modem [ 1.728027] usbcore: registered new interface driver usb_serial_simple [ 1.728072] usbserial: USB Serial support registered for carelink [ 1.728115] usbserial: USB Serial support registered for zio [ 1.728158] usbserial: USB Serial support registered for funsoft [ 1.728206] usbserial: USB Serial support registered for flashloader [ 1.728254] usbserial: USB Serial support registered for google [ 1.728300] usbserial: USB Serial support registered for vivopay [ 1.728343] usbserial: USB Serial support registered for moto_modem [ 1.728390] usbserial: USB Serial support registered for novatel_gps [ 1.728434] usbserial: USB Serial support registered for hp4x [ 1.728476] usbserial: USB Serial support registered for suunto [ 1.728523] usbserial: USB Serial support registered for siemens_mpi [ 1.729078] mousedev: PS/2 mouse device common for all mice [ 1.730077] input: HISI 65xx PowerOn Key as /devices/platform/f8000000.pmic/f8000000.pmic:ponkey@b1/input/input0 [ 1.730627] rtc-pl031 f8003000.rtc: rtc core: registered pl031 as rtc0 [ 1.730823] i2c /dev entries driver [ 1.736667] hisi_thermal f7030700.tsensor: THERMAL ALARM: T > 0 [ 1.736715] hisi_thermal f7030700.tsensor: failed to register sensor id 0: -19 [ 1.736726] hisi_thermal f7030700.tsensor: failed to register thermal sensor: -19 [ 1.736753] hisi_thermal f7030700.tsensor: failed to register sensor id 1: -19 [ 1.736763] hisi_thermal f7030700.tsensor: failed to register thermal sensor: -19 [ 1.749451] hisi_thermal f7030700.tsensor: failed to register sensor id 3: -19 [ 1.749462] hisi_thermal f7030700.tsensor: failed to register thermal sensor: -19 [ 1.749741] device-mapper: ioctl: 4.34.0-ioctl (2015-10-28) initialised: dm-devel@redhat.com [ 1.749854] Bluetooth: HCI UART driver ver 2.3 [ 1.749865] Bluetooth: HCI UART protocol H4 registered [ 1.750532] (stc): chnl_id list empty :4 [ 1.750542] (stk) : st_kim_start<6>[ 1.762527] sdhci: Secure Digital Host Controller Interface driver [ 1.762540] sdhci: Copyright(c) Pierre Ossman [ 1.762588] Synopsys Designware Multimedia Card Interface Driver [ 1.763312] dwmmc_k3 f723d000.dwmmc0: fifo-depth property not found, using value of FIFOTH register as default [ 1.763363] dwmmc_k3 f723d000.dwmmc0: IDMAC supports 32-bit address mode. [ 1.763537] dwmmc_k3 f723d000.dwmmc0: Using internal DMA controller. [ 1.763551] dwmmc_k3 f723d000.dwmmc0: Version ID is 250a [ 1.763606] dwmmc_k3 f723d000.dwmmc0: DW MMC controller at irq 38,32 bit host data width,8 deep fifo [ 1.763856] dwmmc_k3 f723d000.dwmmc0: No vqmmc regulator found [ 1.793588] dwmmc_k3 f723d000.dwmmc0: 1 slots initialized [ 1.793957] dwmmc_k3 f723e000.dwmmc1: fifo-depth property not found, using value of FIFOTH register as default [ 1.794041] dwmmc_k3 f723e000.dwmmc1: IDMAC supports 32-bit address mode. [ 1.794322] dwmmc_k3 f723e000.dwmmc1: Using internal DMA controller. [ 1.794336] dwmmc_k3 f723e000.dwmmc1: Version ID is 250a [ 1.794390] dwmmc_k3 f723e000.dwmmc1: DW MMC controller at irq 39,32 bit host data width,128 deep fifo [ 1.794702] dwmmc_k3 f723e000.dwmmc1: Got CD GPIO [ 1.826403] dwmmc_k3 f723e000.dwmmc1: 1 slots initialized [ 1.826787] dwmmc_k3 f723f000.dwmmc2: fifo-depth property not found, using value of FIFOTH register as default [ 1.826836] dwmmc_k3 f723f000.dwmmc2: IDMAC supports 32-bit address mode. [ 1.826963] dwmmc_k3 f723f000.dwmmc2: Using internal DMA controller. [ 1.826978] dwmmc_k3 f723f000.dwmmc2: Version ID is 250a [ 1.827023] dwmmc_k3 f723f000.dwmmc2: DW MMC controller at irq 40,32 bit host data width,128 deep fifo [ 1.827296] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.828327] ledtrig-cpu: registered to indicate activity on CPUs [ 1.828564] hidraw: raw HID events driver (C) Jiri Kosina [ 1.830304] usbcore: registered new interface driver usbhid [ 1.830317] usbhid: USB HID core driver [ 1.831748] ashmem: initialized [ 1.832033] hi6220-irq-debug f7113000.fiq-debugger: No signal IRQ, error=-6 [ 1.832045] hi6220-irq-debug f7113000.fiq-debugger: No wakeup IRQ, error=-6 [ 1.840117] mmc0: MAN_BKOPS_EN bit is not set [ 1.842327] mmc_host mmc0: Bus speed (slot 0) = 51756522Hz (slot req 52000000Hz, actual 51756522HZ div = 0) [ 1.844374] mmc0: new high speed MMC card at address 0001 [ 1.845099] mmcblk0: mmc0:0001 MMC04G 3.66 GiB [ 1.846039] mmcblk0boot0: mmc0:0001 MMC04G partition 1 1.00 MiB [ 1.850944] mmcblk0boot1: mmc0:0001 MMC04G partition 2 1.00 MiB [ 1.855628] (stk) :ldisc_install = 1 [ 1.855629] mmcblk0rpmb: mmc0:0001 MMC04G partition 3 128 KiB [ 1.862423] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 [ 2.853480] (stk) :ldisc installation timeout [ 3.853593] (stk) :ldisc_install = 0 [ 3.960609] (stk) : timed out waiting for ldisc to be un-installed [ 4.207350] (stk) :ldisc_install = 1 [ 4.207352] console [ttyFIQ0] enabled [ 4.214850] Registered fiq debugger ttyFIQ0 [ 4.221081] u32 classifier [ 4.223852] Actions configured [ 4.227309] Netfilter messages via NETLINK v0.30. [ 4.232136] nf_conntrack version 0.5.0 (7103 buckets, 28412 max) [ 4.239232] ctnetlink v0.93: registering with nfnetlink. [ 4.245119] xt_time: kernel timezone is -0000 [ 4.252417] ip_tables: (C) 2000-2006 Netfilter Core Team [ 4.257993] arp_tables: (C) 2002 David S. Miller [ 4.264316] Initializing XFRM netlink socket [ 4.271282] NET: Registered protocol family 10 [ 4.278450] mip6: Mobile IPv6 [ 4.281529] ip6_tables: (C) 2000-2006 Netfilter Core Team [ 4.292550] sit: IPv6 over IPv4 tunneling driver [ 4.297835] NET: Registered protocol family 17 [ 4.302565] NET: Registered protocol family 15 [ 4.307127] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this. [ 4.325470] Bridge firewalling registered [ 4.330216] Bluetooth: RFCOMM TTY layer initialized [ 4.335167] Bluetooth: RFCOMM socket layer initialized [ 4.340393] Bluetooth: RFCOMM ver 1.11 [ 4.344203] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 4.350205] Bluetooth: HIDP socket layer initialized [ 4.355311] 8021q: 802.1Q VLAN Support v1.8 [ 4.359848] 9pnet: Installing 9P2000 support [ 4.364260] Key type dns_resolver registered [ 4.369307] Registered cp15_barrier emulation handler [ 4.375150] Registered setend emulation handler [ 4.380214] registered taskstats version 1 [ 4.391143] Btrfs loaded [ 4.396496] Key type encrypted registered [ 4.401215] f7111000.uart: ttyAMA1 at MMIO 0xf7111000 (irq = 8, base_baud = 0) is a PL011 rev2 [ 4.410344] f7112000.uart: ttyAMA2 at MMIO 0xf7112000 (irq = 9, base_baud = 0) is a PL011 rev2 [ 4.419985] ssp-pl022 f7106000.spi: ARM PL022 driver, device ID: 0x00041022 [ 4.427116] ssp-pl022 f7106000.spi: mapped registers from 0x00000000f7106000 to ffffff8000342000 [ 4.436073] ssp-pl022 f7106000.spi: Failed to work in dma mode, work without dma! [ 4.458183] hisi-drm soc:display-subsystem: bound f4100000.ade (ops ade_ops) [ 4.465604] hisi-drm soc:display-subsystem: bound f4107800.dsi (ops dsi_ops) [ 4.472742] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 4.479441] [drm] No driver support for vblank timestamp query. [ 4.486381] hisi-drm soc:display-subsystem: No connectors reported connected with modes [ 4.494491] [drm] Cannot find any crtc or sizes - going 1024x768 [ 4.503346] hisi-drm soc:display-subsystem: fb0: frame buffer device [ 4.521471] [drm] Initialized hisi 1.0.0 20150718 on minor 0 [ 4.527536] f72c0000.usb supply vusb_d not found, using dummy regulator [ 4.534303] f72c0000.usb supply vusb_a not found, using dummy regulator [ 4.658315] cfg80211: Timeout while waiting for CRDA to reply, restoring regulatory settings [ 4.658380] cfg80211: Restoring regulatory settings [ 4.658484] cfg80211: Kicking the queue [ 4.873946] dwc2 f72c0000.usb: EPs: 16, dedicated fifos, 1920 entries in SPRAM [ 4.954002] (stk) :ldisc installation timeout [ 4.958412] (stk) :ldisc_install = 0<6>[ 5.437125] dwc2 f72c0000.usb: DWC OTG Controller [ 5.441923] dwc2 f72c0000.usb: new USB bus registered, assigned bus number 1 [ 5.449081] dwc2 f72c0000.usb: irq 36, io mem 0x00000000 [ 5.455247] hub 1-0:1.0: USB hub found [ 5.459114] hub 1-0:1.0: 1 port detected [ 5.464358] dwmmc_k3 f723f000.dwmmc2: fifo-depth property not found, using value of FIFOTH register as default [ 5.474531] dwmmc_k3 f723f000.dwmmc2: IDMAC supports 32-bit address mode. [ 5.481565] dwmmc_k3 f723f000.dwmmc2: Using internal DMA controller. [ 5.488004] dwmmc_k3 f723f000.dwmmc2: Version ID is 250a [ 5.493412] dwmmc_k3 f723f000.dwmmc2: DW MMC controller at irq 40,32 bit host data width,64 deep fifo [ 5.502902] dwmmc_k3 f723f000.dwmmc2: No vqmmc regulator found [ 5.614114] dwmmc_k3 f723f000.dwmmc2: 1 slots initialized [ 5.620234] otg_wakelock_init: No USB transceiver found [ 5.627308] rtc-pl031 f8003000.rtc: setting system clock to 1970-01-01 00:00:11 UTC (11) [ 5.627533] dwmmc_k3 f723f000.dwmmc2: card claims to support voltages below defined range [ 5.646334] mmc_host mmc2: Bus speed (slot 0) = 24800000Hz (slot req 25000000Hz, actual 24800000HZ div = 0) [ 5.659836] mmc2: queuing unknown CIS tuple 0x91 (3 bytes) [ 5.668331] mmc2: new SDIO card at address 0001 [ 5.676793] wl18xx_driver wl18xx.1.auto: Direct firmware load for ti-connectivity/wl1271-nvs.bin failed with error -2 [ 5.687770] wl18xx_driver wl18xx.1.auto: Falling back to user helper [ 5.688255] SOC_MED: disabling [ 5.688312] LDO2_2V8: disabling [ 5.688356] LDO7_SDIO: disabling [ 5.688390] LDO10_2V85: disabling [ 5.688424] LDO13_1V8: disabling [ 5.688459] LDO14_2V8: disabling [ 5.688497] LDO17_2V5: disabling [ 5.689078] ALSA device list: [ 5.689092] No soundcards found. [ 5.724199] Freeing unused kernel memory: 852K (ffffffc000f74000 - ffffffc001049000) [ 5.732075] Freeing alternatives memory: 52K (ffffffc001049000 - ffffffc001056000) [ 5.742961] init: init first stage started! [ 5.752112] SELinux: 2048 avtab hash slots, 5148 rules. [ 5.755558] SELinux: 2048 avtab hash slots, 5148 rules. [ 5.755582] SELinux: 1 users, 2 roles, 564 types, 0 bools, 1 sens, 1024 cats [ 5.755596] SELinux: 63 classes, 5148 rules [ 5.757614] SELinux: Completing initialization. [ 5.757624] SELinux: Setting up existing superblocks. [ 5.804014] audit: type=1403 audit(11.671:2): policy loaded auid=4294967295 ses=4294967295 [ 5.813251] init: (Initializing SELinux non-enforcing took 0.07s.) [ 5.827798] init: init second stage started! [ 5.837507] init: Running restorecon... [ 5.961529] (stk) : timed out waiting for ldisc to be un-installed [ 5.980117] init: waitpid failed: No child processes [ 5.985571] init: (Loading properties from /default.prop took 0.00s.) [ 5.994781] init: (Parsing /init.environ.rc took 0.00s.) [ 6.000694] init: (Parsing /init.usb.rc took 0.00s.) [ 6.006425] init: (Parsing init.hikey.usb.rc took 0.00s.) [ 6.011904] init: (Parsing /init.hikey.rc took 0.01s.) [ 6.017942] init: (Parsing /init.usb.configfs.rc took 0.00s.) [ 6.023898] init: (Parsing /init.zygote64_32.rc took 0.00s.) [ 6.029640] init: (Parsing /init.rc took 0.04s.) [ 6.034944] init: Starting service 'ueventd'... [ 6.042876] init: Waiting for /dev/.coldboot_done... [ 6.046377] ueventd: ueventd started! [ 6.074649] (stk) :ldisc_install = 1 [ 6.343076] ueventd: Coldboot took 0.29s. [ 6.346683] init: Waiting for /dev/.coldboot_done took 0.30s. [ 6.346763] init: /dev/hw_random not found [ 6.366708] init: write_file: Unable to open '/proc/cpu/alignment': No such file or directory [ 6.375400] init: write_file: Unable to open '/proc/sys/kernel/sched_tunable_scaling': No such file or directory [ 6.385742] init: write_file: Unable to open '/proc/sys/kernel/sched_latency_ns': No such file or directory [ 6.395640] init: write_file: Unable to open '/proc/sys/kernel/sched_wakeup_granularity_ns': No such file or directory [ 6.406535] init: write_file: Unable to open '/proc/sys/kernel/sched_compat_yield': No such file or directory [ 6.433301] Registered swp emulation handler [ 6.438548] init: /dev/hw_random not found [ 6.467010] EXT4-fs (mmcblk0p9): mounted filesystem with ordered data mode. Opts: (null) [ 6.475414] fs_mgr: __mount(source=/dev/block/platform/soc/f723d000.dwmmc0/by-name/system,target=/system,type=ext4)=0 [ 6.486273] fs_mgr: mount_with_alternatives(): skipping fstab dup mountpoint=/system rec[1].fs_type=squashfs already mounted as ext4. [ 7.078285] (stk) :ldisc installation timeout [ 7.082882] (stk) :ldisc_install = 0<6>[ 7.573677] EXT4-fs (mmcblk0p8): recovery complete [ 7.581051] EXT4-fs (mmcblk0p8): mounting with "discard" option, but the device does not support discard [ 7.590689] EXT4-fs (mmcblk0p8): mounted filesystem with ordered data mode. Opts: discard,noauto_da_alloc,data=ordered,user_xattr,discard,barrier=1 [ 7.604243] fs_mgr: __mount(source=/dev/block/platform/soc/f723d000.dwmmc0/by-name/cache,target=/cache,type=ext4)=0 [ 7.809973] cfg80211: Timeout while waiting for CRDA to reply, restoring regulatory settings [ 7.809998] cfg80211: Restoring regulatory settings [ 7.810027] cfg80211: Kicking the queue [ 8.090046] (stk) : timed out waiting for ldisc to be un-installed [ 8.203804] (stk) :ldisc_install = 1(stk) :ldisc installation timeout [ 9.208791] (stk) :ldisc_install = 0(stk) : timed out waiting for ldisc to be un-installed [ 10.321732] (stk) :ldisc_install = 1<7>[ 10.962140] cfg80211: Timeout while waiting for CRDA to reply, restoring regulatory settings [ 10.962212] cfg80211: Restoring regulatory settings [ 10.962314] cfg80211: Kicking the queue [ 11.325796] (stk) :ldisc installation timeout [ 11.330224] (stk) :ldisc_install = 0(stk) : timed out waiting for ldisc to be un-installed [ 12.445804] (stk) :ldisc_install = 1(stk) :ldisc installation timeout [ 13.453156] (stk) :ldisc_install = 0<7>[ 14.114044] cfg80211: Timeout while waiting for CRDA to reply, restoring regulatory settings [ 14.114119] cfg80211: Restoring regulatory settings [ 14.114222] cfg80211: Kicking the queue [ 14.453995] (stk) : timed out waiting for ldisc to be un-installed [ 14.462294] Bluetooth: st_register failed -22 [ 17.270249] cfg80211: Timeout while waiting for CRDA to reply, restoring regulatory settings [ 17.270323] cfg80211: Restoring regulatory settings [ 17.270425] cfg80211: Kicking the queue [ 17.578063] random: nonblocking pool is initialized [ 20.425808] cfg80211: Timeout while waiting for CRDA to reply, restoring regulatory settings [ 20.425881] cfg80211: Restoring regulatory settings [ 20.425972] cfg80211: Kicking the queue [ 23.578057] cfg80211: Timeout while waiting for CRDA to reply, restoring regulatory settings [ 23.578131] cfg80211: Restoring regulatory settings [ 23.578219] cfg80211: Kicking the queue [ 26.730397] cfg80211: Timeout while waiting for CRDA to reply, restoring regulatory settings [ 26.730474] cfg80211: Restoring regulatory settings [ 26.730564] cfg80211: Kicking the queue [ 27.050661] fs_mgr: __mount(source=/dev/block/platform/soc/f723d000.dwmmc0/by-name/userdata,target=/data,type=ext4)=-1 [ 27.062012] fs_mgr: Failed to mount an un-encryptable or wiped partition on/dev/block/platform/soc/f723d000.dwmmc0/by-name/userdata at /data options: discard,noauto_da_alloc,data=ordered,user_xattr,discard,barrier=1 error: No such file or directory [ 27.084639] init: fs_mgr_mount_all returned an error [ 27.104081] init: (Parsing /system/etc/init/atrace.rc took 0.00s.) [ 27.113807] init: (Parsing /system/etc/init/bootanim.rc took 0.00s.) [ 27.123392] init: (Parsing /system/etc/init/bootstat.rc took 0.00s.) [ 27.132983] init: (Parsing /system/etc/init/debuggerd.rc took 0.00s.) [ 27.142255] init: (Parsing /system/etc/init/debuggerd64.rc took 0.00s.) [ 27.152705] init: (Parsing /system/etc/init/drmserver.rc took 0.00s.) [ 27.162539] init: (Parsing /system/etc/init/dumpstate.rc took 0.00s.) [ 27.172304] init: (Parsing /system/etc/init/gatekeeperd.rc took 0.00s.) [ 27.182061] init: (Parsing /system/etc/init/init-debug.rc took 0.00s.) [ 27.191909] init: (Parsing /system/etc/init/installd.rc took 0.00s.) [ 27.201173] init: (Parsing /system/etc/init/keystore.rc took 0.00s.) [ 27.210742] init: (Parsing /system/etc/init/lmkd.rc took 0.00s.) [ 27.220080] init: (Parsing /system/etc/init/logcatd.rc took 0.00s.) [ 27.229868] init: (Parsing /system/etc/init/logd.rc took 0.00s.) [ 27.238832] init: (Parsing /system/etc/init/mdnsd.rc took 0.00s.) [ 27.248423] init: (Parsing /system/etc/init/mediaserver.rc took 0.00s.) [ 27.258015] init: (Parsing /system/etc/init/mtpd.rc took 0.00s.) [ 27.267466] init: (Parsing /system/etc/init/netd.rc took 0.00s.) [ 27.276428] init: (Parsing /system/etc/init/perfprofd.rc took 0.00s.) [ 27.286118] init: (Parsing /system/etc/init/racoon.rc took 0.00s.) [ 27.295353] init: (Parsing /system/etc/init/servicemanager.rc took 0.00s.) [ 27.305679] init: (Parsing /system/etc/init/surfaceflinger.rc took 0.00s.) [ 27.315523] init: (Parsing /system/etc/init/uncrypt.rc took 0.00s.) [ 27.324989] init: (Parsing /system/etc/init/vdc.rc took 0.00s.) [ 27.333876] init: (Parsing /system/etc/init/vold.rc took 0.00s.) [ 27.340627] init: fs_mgr_mount_all returned unexpected error 255 [ 27.354872] init: Starting service 'logd'... [ 27.362908] init: SELinux: Could not set context for /sys/kernel/debug/tracing: Operation not supported on transport endpoint [ 27.387934] audit: type=1400 audit(33.255:3): avc: denied { create } for pid=1 comm="init" name="sdcard" scontext=u:r:init:s0 tcontext=u:object_r:tmpfs:s0 tclass=lnk_file permissive=1 [ 27.405178] init: write_file: Unable to open '/sys/devices/leds/leds/bt_active/trigger': No such file or directory [ 27.424238] init: (Loading properties from /system/build.prop took 0.01s.) [ 27.431348] init: (Loading properties from /vendor/build.prop took 0.00s.) [ 27.438426] init: (Loading properties from /factory/factory.prop took 0.00s.) [ 27.445957] init: /recovery not specified in fstab [ 27.451137] init: SELinux: Could not set context for /data: Read-only file system [ 27.459271] init: Starting service 'debuggerd'... [ 27.465128] init: Starting service 'debuggerd64'... [ 27.475832] init: Starting service 'vold'... [ 27.481522] init: Not bootcharting. [ 27.492495] init: SELinux: Could not set context for /data: Read-only file system [ 27.500753] init: Starting service 'exec 1 (/system/bin/tzdatacheck)'... [ 27.648692] audit: type=1400 audit(33.515:4): avc: denied { dac_override } for pid=1646 comm="logd" capability=1 scontext=u:r:logd:s0 tcontext=u:r:logd:s0 tclass=capability permissive=1 [ 27.683369] logd.auditd: start [ 27.686689] logd.klogd: 27641347497 [ 27.692280] init: Service 'exec 1 (/system/bin/tzdatacheck)' (pid 1650) exited with status 0 [ 27.702091] init: SELinux: Could not get canonical path for /data/local/tmp/lava restorecon: No such file or directory. [ 27.713587] init: (Loading properties from /data/local.prop took 0.00s.) [ 27.720513] init: Unable to open persistent property directory "/data/property": No such file or directory [ 27.730710] init: Starting service 'logd-reinit'... [ 27.737401] init: write_file: Unable to open '/proc/sys/vm/min_free_order_shift': No such file or directory [ 27.750039] init: Starting service 'healthd'... [ 27.750906] logd.daemon: reinit [ 27.759147] init: Starting service 'lmkd'... [ 27.762232] binder: 1657:1657 transaction failed 29189, size 0-0 [ 27.770761] init: Starting service 'servicemanager'... [ 27.777060] init: Starting service 'surfaceflinger'... [ 27.783242] init: Service 'logd-reinit' (pid 1656) exited with status 0 [ 27.792522] file system registered [ 27.797010] using random self ethernet address [ 27.801567] using random host ethernet address [ 27.806255] init: write_file: Unable to open '/config/usb_gadget/g1/functions/rndis.gs4/wceis': Permission denied [ 27.809628] logd.auditd: policy loaded [ 27.813256] logd.auditd: integrity enforcement suppressed; not rebooting [ 27.817558] type=1400 audit(33.659:5): avc: denied { add_name } for pid=1 comm="init" name="g1" scontext=u:r:init:s0 tcontext=u:object_r:configfs:s0 tclass=dir permissive=1 [ 27.847442] init: Starting service 'console'... [ 27.860134] init: write_file: Unable to open '/sys/class/android_usb/android0/enable': Permission denied [ 27.860340] type=1400 audit(33.727:6): avc: denied { write } for pid=1 comm="init" name="android0" dev="sysfs" ino=12544 scontext=u:r:init:s0 tcontext=u:object_r:sysfs:s0 tclass=dir permissive=1 [ 27.887423] init: write_file: Unable to open '/sys/class/android_usb/android0/idVendor': Permission denied [ 27.897390] init: write_file: Unable to open '/sys/class/android_usb/android0/idProduct': Permission denied [ 27.907414] init: write_file: Unable to open '/sys/class/android_usb/android0/functions': Permission denied [ 27.917430] init: write_file: Unable to open '/sys/class/android_usb/android0/enable': Permission denied [ 27.927106] init: Starting service 'adbd'... [ 27.936798] read descriptors [ 27.939788] read descriptors [ 27.942762] read strings [ 27.950582] dwc2 f72c0000.usb: bound driver configfs-gadget [ 27.990996] type=1400 audit(33.859:7): avc: denied { read write } for pid=1671 comm="sh" path="/dev/ttyFIQ0" dev="tmpfs" ino=2300 scontext=u:r:shell:s0 tcontext=u:object_r:device:s0 tclass=chr_file permissive=1 [ 28.029184] type=1400 audit(33.895:8): avc: denied { ioctl } for pid=1671 comm="sh" path="/dev/ttyFIQ0" dev="tmpfs" ino=2300 ioctlcmd=5401 scontext=u:r:shell:s0 tcontext=u:object_r:device:s0 tclass=chr_file permissive=1 [ 28.222831] wlcore: wl18xx HW: 183x or 180x, PG 2.2 (ROM 0x11) [ 28.231239] cfg80211: Updating information on frequency 2412 MHz with regulatory rule: [ 28.231252] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2000 mBm) [ 28.231262] cfg80211: Updating information on frequency 2417 MHz with regulatory rule: [ 28.231269] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2000 mBm) [ 28.231277] cfg80211: Updating information on frequency 2422 MHz with regulatory rule: [ 28.231284] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2000 mBm) [ 28.231291] cfg80211: Updating information on frequency 2427 MHz with regulatory rule: [ 28.231299] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2000 mBm) [ 28.231306] cfg80211: Updating information on frequency 2432 MHz with regulatory rule: [ 28.231313] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2000 mBm) [ 28.231320] cfg80211: Updating information on frequency 2437 MHz with regulatory rule: [ 28.231327] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2000 mBm) [ 28.231335] cfg80211: Updating information on frequency 2442 MHz with regulatory rule: [ 28.231342] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2000 mBm) [ 28.231349] cfg80211: Updating information on frequency 2447 MHz with regulatory rule: [ 28.231356] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2000 mBm) [ 28.231364] cfg80211: Updating information on frequency 2452 MHz with regulatory rule: [ 28.231371] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2000 mBm) [ 28.231378] cfg80211: Updating information on frequency 2457 MHz with regulatory rule: [ 28.231385] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2000 mBm) [ 28.231392] cfg80211: Updating information on frequency 2462 MHz with regulatory rule: [ 28.231399] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2000 mBm) [ 28.231407] cfg80211: Updating information on frequency 2467 MHz with regulatory rule: [ 28.231414] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (600 mBi, 2000 mBm) [ 28.231421] cfg80211: Updating information on frequency 2472 MHz with regulatory rule: [ 28.231428] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (600 mBi, 2000 mBm) [ 28.231435] cfg80211: Updating information on frequency 2484 MHz with regulatory rule: [ 28.231443] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (600 mBi, 2000 mBm) [ 28.231451] cfg80211: Disabling freq 5040 MHz [ 28.231458] cfg80211: Disabling freq 5060 MHz [ 28.231464] cfg80211: Disabling freq 5080 MHz [ 28.231471] cfg80211: Disabling freq 5170 MHz [ 28.231479] cfg80211: Updating information on frequency 5180 MHz with regulatory rule: [ 28.231486] cfg80211: (5170000 KHz - 5250000 KHz @ 160000 KHz), (600 mBi, 2000 mBm) [ 28.231494] cfg80211: Updating information on frequency 5190 MHz with regulatory rule: [ 28.231502] cfg80211: (5170000 KHz - 5250000 KHz @ 160000 KHz), (600 mBi, 2000 mBm) [ 28.231510] cfg80211: Updating information on frequency 5200 MHz with regulatory rule: [ 28.231518] cfg80211: (5170000 KHz - 5250000 KHz @ 160000 KHz), (600 mBi, 2000 mBm) [ 28.231525] cfg80211: Updating information on frequency 5210 MHz with regulatory rule: [ 28.231532] cfg80211: (5170000 KHz - 5250000 KHz @ 160000 KHz), (600 mBi, 2000 mBm) [ 28.231540] cfg80211: Updating information on frequency 5220 MHz with regulatory rule: [ 28.231547] cfg80211: (5170000 KHz - 5250000 KHz @ 160000 KHz), (600 mBi, 2000 mBm) [ 28.231554] cfg80211: Updating information on frequency 5230 MHz with regulatory rule: [ 28.231561] cfg80211: (5170000 KHz - 5250000 KHz @ 160000 KHz), (600 mBi, 2000 mBm) [ 28.231569] cfg80211: Updating information on frequency 5240 MHz with regulatory rule: [ 28.231576] cfg80211: (5170000 KHz - 5250000 KHz @ 160000 KHz), (600 mBi, 2000 mBm) [ 28.231583] cfg80211: Updating information on frequency 5260 MHz with regulatory rule: [ 28.231591] cfg80211: (5250000 KHz - 5330000 KHz @ 160000 KHz), (600 mBi, 2000 mBm) [ 28.231598] cfg80211: Updating information on frequency 5280 MHz with regulatory rule: [ 28.231605] cfg80211: (5250000 KHz - 5330000 KHz @ 160000 KHz), (600 mBi, 2000 mBm) [ 28.231613] cfg80211: Updating information on frequency 5300 MHz with regulatory rule: [ 28.231621] cfg80211: (5250000 KHz - 5330000 KHz @ 160000 KHz), (600 mBi, 2000 mBm) [ 28.231667] cfg80211: Updating information on frequency 5320 MHz with regulatory rule: [ 28.231675] cfg80211: (5250000 KHz - 5330000 KHz @ 160000 KHz), (600 mBi, 2000 mBm) [ 28.231683] cfg80211: Updating information on frequency 5500 MHz with regulatory rule: [ 28.231690] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (600 mBi, 2000 mBm) [ 28.231697] cfg80211: Updating information on frequency 5520 MHz with regulatory rule: [ 28.231704] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (600 mBi, 2000 mBm) [ 28.231712] cfg80211: Updating information on frequency 5540 MHz with regulatory rule: [ 28.231719] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (600 mBi, 2000 mBm) [ 28.231727] cfg80211: Updating information on frequency 5560 MHz with regulatory rule: [ 28.231734] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (600 mBi, 2000 mBm) [ 28.231741] cfg80211: Updating information on frequency 5580 MHz with regulatory rule: [ 28.231748] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (600 mBi, 2000 mBm) [ 28.231755] cfg80211: Updating information on frequency 5600 MHz with regulatory rule: [ 28.231763] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (600 mBi, 2000 mBm) [ 28.231770] cfg80211: Updating information on frequency 5620 MHz with regulatory rule: [ 28.231777] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (600 mBi, 2000 mBm) [ 28.231784] cfg80211: Updating information on frequency 5640 MHz with regulatory rule: [ 28.231792] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (600 mBi, 2000 mBm) [ 28.231799] cfg80211: Updating information on frequency 5660 MHz with regulatory rule: [ 28.231806] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (600 mBi, 2000 mBm) [ 28.231813] cfg80211: Updating information on frequency 5680 MHz with regulatory rule: [ 28.231820] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (600 mBi, 2000 mBm) [ 28.231828] cfg80211: Updating information on frequency 5700 MHz with regulatory rule: [ 28.231835] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (600 mBi, 2000 mBm) [ 28.231842] cfg80211: Updating information on frequency 5745 MHz with regulatory rule: [ 28.231849] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (600 mBi, 2000 mBm) [ 28.231857] cfg80211: Updating information on frequency 5765 MHz with regulatory rule: [ 28.231864] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (600 mBi, 2000 mBm) [ 28.231871] cfg80211: Updating information on frequency 5785 MHz with regulatory rule: [ 28.231878] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (600 mBi, 2000 mBm) [ 28.231886] cfg80211: Updating information on frequency 5805 MHz with regulatory rule: [ 28.231982] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (600 mBi, 2000 mBm) [ 28.231991] cfg80211: Updating information on frequency 5825 MHz with regulatory rule: [ 28.231998] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (600 mBi, 2000 mBm) [ 28.235629] wlcore: loaded [ 28.245701] dwc2 f72c0000.usb: new device is high-speed [ 28.305789] android_work: sent uevent USB_STATE=CONNECTED [ 28.321674] dwc2 f72c0000.usb: new device is high-speed [ 28.393580] dwc2 f72c0000.usb: new address 14 [ 28.416295] configfs-gadget gadget: high-speed config #1: b [ 28.422235] android_work: sent uevent USB_STATE=CONFIGURED [ 28.430720] Mali<2>: Session 0x3583D600 with pid 1660 was granted higher priority. [ 28.441875] init: Starting service 'bootanim'... [ 28.764140] healthd: No battery devices found [ 29.885740] cfg80211: Timeout while waiting for CRDA to reply, restoring regulatory settings [ 29.885816] cfg80211: Restoring regulatory settings [ 29.885954] cfg80211: Kicking the queue [ 33.034252] cfg80211: Timeout while waiting for CRDA to reply, restoring regulatory settings [ 33.034336] cfg80211: Restoring regulatory settings [ 33.034510] cfg80211: Kicking the queue [ 36.185892] cfg80211: Timeout while waiting for CRDA to reply, restoring regulatory settings [ 36.185984] cfg80211: Restoring regulatory settings [ 36.186149] cfg80211: Kicking the queue [ 88.764575] healthd: battery l=100 v=0 t=42.4 h=2 st=2 chg=a [ 96.270138] cfg80211: Verifying active interfaces after reg change