On 21 March 2012 15:32, Akira Tsukamoto <akira.tsukamoto@linaro.org> wrote:

Hi Andrew,

I completely had the same issue with you and was able to solve it by
making the boot image with modified following way.
(I should have seen this email earlier, yesterday was Japanese
public holiday ;) )

1)
Download these files:
boot.tar.bz2
userdata.tar.bz2
system.tar.bz2
from:

https://android-build.linaro.org/builds/~linaro-android/origen-ics-gcc46-samsunglt-stable-blob-12.02-release/

2)
Get the latest linaro-image-tools:
$bzr branch lp:linaro-image-tools

If you do not have bzr in your ubuntu, then just:
$sudo apt-get install bzr
should do.

3)
Create boot image as following command line:
$./linaro-image-tools/linaro-android-media-create --mmc /dev/mmcblk0 --dev origen --system system.tar.bz2 --userdata userdata.tar.bz2 --boot boot.tar.bz2 --extra-boot-args s5p_tvout_fb.hdmi_lcd_display=1
(My PC has SD slot at /dev/mmcblk0 but change it if it is different for you)

4)
Insert the SD card to Origen then boot it.
The Android will show with 1024x600 resolution in the middle of your
display.

Please let me know if this helps.

Thanks,

Akira

On 03/21/2012 12:17 PM, Chenglie He wrote:

Hey, Andy

Here we use linaro-android-media-create to burn the sd card. Since I
never use the burn steps as you mentioned, so I could not comment on it.

-jack

On 20 March 2012 06:56, Andrew Fraser <afraser@andyfraser.co.uk
<mailto:afraser@andyfraser.co.uk>> wrote:

Okay, so I have tried both 12.02 for Android and 12.02 for Ubuntu
Desktop both for the Origen board.____

I got the Android image from here:
http://releases.linaro.org/12.02/android/leb-origen/origen-ics-gcc46-samsunglt-stable-blob.img.gz
and the Ubuntu from here:
http://releases.linaro.org/12.02/oneiric/ubuntu-desktop/origen-ubuntu-desktop.img.gz.____

__ __

My commands to make the Ubuntu image were:____

__ __

SDCARD=/dev/sdb____

IMGFILE=origen-ubuntu-desktop.image____

gunzip ${IMGFILE}.gz____

dd bs=64k if=${IMGFILE} of=${SDCARD}____

__ __

I then powered up the Origen board and again, got no output on the
LCD and only a small amount of boot information in terminal before
the SD card power LED (LED4) went off.____

__ __

U-Boot 2011.12 (Feb 16 2012 - 21:52:47) for ORIGEN____

__ __

CPU: S5PC210@1000MHz____

__ __

Board: ORIGEN____

DRAM: 1 GiB____

WARNING: Caches not enabled____

MMC: SAMSUNG SD/MMC: 0____

In: serial____

Out: serial____

Err: serial____

Hit any key to stop autoboot: 0____

reading uImage____

__ __

4082320 bytes read____

reading uInitrd____

__ __

2175126 bytes read____

## Booting kernel from Legacy Image at 40007000 ...____

Image Name: Linux____

Image Type: ARM Linux Kernel Image (uncompressed)____

Data Size: 4082256 Bytes = 3.9 MiB____

Load Address: 40008000____

Entry Point: 40008000____

Verifying Checksum ... OK____

## Loading init Ramdisk from Legacy Image at 42000000 ...____

Image Name: initramfs____

Image Type: ARM Linux RAMDisk Image (uncompressed)____

Data Size: 2175062 Bytes = 2.1 MiB____

Load Address: 00000000____

Entry Point: 00000000____

Verifying Checksum ... OK____

Loading Kernel Image ... OK____

OK____

__ __

Starting kernel ...____

__ __

Uncompressing Linux... done, booting the kernel.____

__ __

__ __

For the Android image, I used the following commands:____

__ __

SDCARD=/dev/sdb____

IMGFILE=origen-ics-gcc46-samsunglt-stable-blob.img____

gunzip ${IMGFILE}.gz____

dd bs=64k if=${IMGFILE} of=${SDCARD}____

__ __

Exactly the same thing happened as I previously mentioned, got a
bunch of boot text then LED4 goes off and nothing else happens.____

__ __

Any advice would be gratefully accepted.____

__ __

*Andy**____*

*__ __*

__ __

__ __

Hi, could you paste your command to flash SD card here?____

I have just purchased an Origen Board - Full Package. I flashed the
SD card with igen-ics-gcc46-samsunglt-stable-blob.img and placed it
into the SD card slot. I flicked the power switch and pressed SWITCH
then POWER and saw the board booting in terminal. However, after a
short period of time LED4 turns off and I do not see the LCD light
or show the Android screen. The output in terminal is given below.
Is my board faulty or have I not flashed the correct image to the SD
card ?____

U-Boot 2011.06-01275-gd6186aa (Feb 17 2012 - 08:54:12) for ORIGEN____

CPU: S5PC210@1000MHz <mailto:S5PC210@1000MHz>____

Board: ORIGEN
DRAM: 1 GiB
WARNING: Caches not enabled
MMC: SAMSUNG SD/MMC: 0
*** Warning - bad CRC, using default environment____

In: serial
Out: serial
Err: serial
Hit any key to stop autoboot: 0
reading boot.scr____

397 bytes read
Running bootscript from mmc0:2 ...
## Executing script at 42000000
reading uImage____

4049424 bytes read
reading uInitrd____

166156 bytes read
## Booting kernel from Legacy Image at 40007000 ...
Image Name: Linux-3.0.4+
Image Type: ARM Linux Kernel Image (uncompressed)
Data Size: 4049360 Bytes = 3.9 MiB
Load Address: 40008000
Entry Point: 40008000
Verifying Checksum ... OK
## Loading init Ramdisk from Legacy Image at 42000000 ...
Image Name: Android Ramdisk Image
Image Type: ARM Linux RAMDisk Image (gzip compressed)
Data Size: 166092 Bytes = 162.2 KiB
Load Address: 00000000
Entry Point: 00000000
Verifying Checksum ... OK
Loading Kernel Image ... OK
OK____

Starting kernel ...____

Uncompressing Linux... done, booting the kernel.
<5>Linux version 3.0.4+ (jenkins-build@ip-10-140-6-146
<mailto:jenkins-build@ip-10-140-6-146>) (gcc version 4.6.3 20120201

(prerelease) (Linaro GCC 4.6-2012.02) ) #1 SMP PREEMPT Fri Feb 17
09:34:26 UTC 2012
CPU: ARMv7 Processor [412fc091] revision 1 (ARMv7), cr=10c5387f
CPU: VIPT nonaliasing data cache, VIPT aliasing instruction cache
Machine: ORIGEN
<4>Ignoring unrecognised tag 0x00000000
<4>Ignoring unrecognised tag 0x00000000
<4>Ignoring unrecognised tag 0x00000000
<4>Ignoring unrecognised tag 0x00000000
<5>Truncating RAM at 60000000-7fffffff to -6dffffff (vmalloc region
overlap).
<3>CMA reserve : jpeg, addr is 0x5e800000, size is 0x1800000
<3>CMA reserve : fimc0, addr is 0x5e300000, size is 0x500000
<3>CMA reserve : fimc1, addr is 0x5de00000, size is 0x500000
<3>CMA reserve : fimc2, addr is 0x5d900000, size is 0x500000
<3>CMA reserve : fimc3, addr is 0x5d400000, size is 0x500000
<3>CMA reserve : fimd, addr is 0x5bc00000, size is 0x1800000
<3>CMA reserve : common, addr is 0x57c00000, size is 0x4000000
<3>CMA reserve : (null), addr is 0x57c00000, size is 0x0
Memory policy: ECC disabled, Data cache writealloc
CPU EXYNOS4210 (id 0x43210011)
<7>exynos4_init_clocks: initializing clocks
<6>S3C24XX Clocks, Copyright 2004 Simtec Electronics
<3>s3c_register_clksrc: clock armclk has no registers set
<3>mout_audss: bad source 0
<7>exynos4_setup_clocks: registering clocks
<7>exynos4_setup_clocks: xtal is 24000000
<6>EXYNOS4: PLL settings, A=1000000000, M=800000000, E=96000000
V=108000000<6>EXYNOS4: ARMCLK=1000000000, DMC=400000000,
ACLK200=200000000
ACLK100=100000000, ACLK160=160000000, ACLK133=133333333
<6>uclk1: source is mout_mpll (6), rate is 100000000
<6>uclk1: source is mout_mpll (6), rate is 100000000
<6>uclk1: source is mout_mpll (6), rate is 100000000
<6>uclk1: source is mout_mpll (6), rate is 100000000
<6>sclk_pwm: source is ext_xtal (0), rate is 24000000
<6>sclk_csis: source is xusbxti (1), rate is 0
<6>sclk_csis: source is xusbxti (1), rate is 0
<6>sclk_cam0: source is xusbxti (1), rate is 0
<6>sclk_cam1: source is xusbxti (1), rate is 0
<6>sclk_fimc: source is xusbxti (1), rate is 0
<6>sclk_fimc: source is xusbxti (1), rate is 0
<6>sclk_fimc: source is xusbxti (1), rate is 0
<6>sclk_fimc: source is xusbxti (1), rate is 0
<6>sclk_mixer: source is sclk_dac (0), rate is 24000000
<6>sclk_fimd0: source is xusbxti (1), rate is 0
<6>sclk_fimd1: source is xusbxti (1), rate is 0
<6>sclk_sata: source is mout_mpll (0), rate is 133333333
<6>sclk_spi: source is xusbxti (1), rate is 0
<6>sclk_spi: source is mout_mpll (6), rate is 80000000
<6>sclk_spi: source is xusbxti (1), rate is 0
<6>sclk_fimg2d: source is mout_g2d0 (0), rate is 100000000
<7>On node 0 totalpages: 188416
<7> Normal zone: 1472 pages used for memmap
<7> Normal zone: 0 pages reserved
<7> Normal zone: 186944 pages, LIFO batch:31
<6>PERCPU: Embedded 7 pages/cpu @c0f96000 s6528 r8192 d13952 u32768
<7>pcpu-alloc: s6528 r8192 d13952 u32768 alloc=8*4096
<7>pcpu-alloc: [0] 0 [0] 1
Built 1 zonelists in Zone order, mobility grouping on. Total pages:
186944
<5>Kernel command line: console=tty0 console=ttySAC2,115200n8
rootwait ro init=/init androidboot.console=ttySAC2 console=ttySAC2
root=/dev/mmcblk0p2____

<6>PID hash table entries: 4096 (order: 2, 16384 bytes)
<6>Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
<6>Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
<6>Memory: 736MB = 736MB total
<5>Memory: 601736k/601736k available, 151928k reserved, 0K highmem
<5>Virtual kernel memory layout:
vector : 0xffff0000 - 0xffff1000 ( 4 kB)
fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
DMA : 0xfe800000 - 0xffe00000 ( 22 MB)
vmalloc : 0xee800000 - 0xf6000000 ( 120 MB)
lowmem : 0xc0000000 - 0xee000000 ( 736 MB)
modules : 0xbf000000 - 0xc0000000 ( 16 MB)
.text : 0xc0008000 - 0xc078fd14 (7712 kB)
.init : 0xc0790000 - 0xc07d5980 ( 279 kB)
.data : 0xc07d6000 - 0xc0835930 ( 383 kB)
.bss : 0xc0835954 - 0xc098bca8 (1369 kB)
<6>Preemptible hierarchical RCU implementation.
<6>NR_IRQS:624
<6>sched_clock: 32 bits at 50MHz, resolution 20ns, wraps every 85899ms
<6>Console: colour dummy device 80x30
<6>console [tty0] enabled
Linux version 3.0.4+ (jenkins-build@ip-10-140-6-146
<mailto:jenkins-build@ip-10-140-6-146>) (gcc version 4.6.3 20120201

(prerelease) (Linaro GCC 4.6-2012.02) ) #1 SMP PREEMPT Fri Feb 17
09:34:26 UTC 2012
CPU: ARMv7 Processor [412fc091] revision 1 (ARMv7), cr=10c5387f
CPU: VIPT nonaliasing data cache, VIPT aliasing instruction cache
Machine: ORIGEN
Ignoring unrecognised tag 0x00000000
Ignoring unrecognised tag 0x00000000
Ignoring unrecognised tag 0x00000000
Ignoring unrecognised tag 0x00000000
Truncating RAM at 60000000-7fffffff to -6dffffff (vmalloc region
overlap).
CMA reserve : jpeg, addr is 0x5e800000, size is 0x1800000
CMA reserve : fimc0, addr is 0x5e300000, size is 0x500000
CMA reserve : fimc1, addr is 0x5de00000, size is 0x500000
CMA reserve : fimc2, addr is 0x5d900000, size is 0x500000
CMA reserve : fimc3, addr is 0x5d400000, size is 0x500000
CMA reserve : fimd, addr is 0x5bc00000, size is 0x1800000
CMA reserve : common, addr is 0x57c00000, size is 0x4000000
CMA reserve : (null), addr is 0x57c00000, size is 0x0
Memory policy: ECC disabled, Data cache writealloc
CPU EXYNOS4210 (id 0x43210011)
S3C24XX Clocks, Copyright 2004 Simtec Electronics
s3c_register_clksrc: clock armclk has no registers set
mout_audss: bad source 0
EXYNOS4: PLL settings, A=1000000000, M=800000000, E=96000000 V=108000000
EXYNOS4: ARMCLK=1000000000, DMC=400000000, ACLK200=200000000
ACLK100=100000000, ACLK160=160000000, ACLK133=133333333
uclk1: source is mout_mpll (6), rate is 100000000
uclk1: source is mout_mpll (6), rate is 100000000
uclk1: source is mout_mpll (6), rate is 100000000
uclk1: source is mout_mpll (6), rate is 100000000
sclk_pwm: source is ext_xtal (0), rate is 24000000
sclk_csis: source is xusbxti (1), rate is 0
sclk_csis: source is xusbxti (1), rate is 0
sclk_cam0: source is xusbxti (1), rate is 0
sclk_cam1: source is xusbxti (1), rate is 0
sclk_fimc: source is xusbxti (1), rate is 0
sclk_fimc: source is xusbxti (1), rate is 0
sclk_fimc: source is xusbxti (1), rate is 0
sclk_fimc: source is xusbxti (1), rate is 0
sclk_mixer: source is sclk_dac (0), rate is 24000000
sclk_fimd0: source is xusbxti (1), rate is 0
sclk_fimd1: source is xusbxti (1), rate is 0
sclk_sata: source is mout_mpll (0), rate is 133333333
sclk_spi: source is xusbxti (1), rate is 0
sclk_spi: source is mout_mpll (6), rate is 80000000
sclk_spi: source is xusbxti (1), rate is 0
sclk_fimg2d: source is mout_g2d0 (0), rate is 100000000
PERCPU: Embedded 7 pages/cpu @c0f96000 s6528 r8192 d13952 u32768
Built 1 zonelists in Zone order, mobility grouping on. Total pages:
186944
Kernel command line: console=tty0 console=ttySAC2,115200n8 rootwait
ro init=/init androidboot.console=ttySAC2 console=ttySAC2
root=/dev/mmcblk0p2____

PID hash table entries: 4096 (order: 2, 16384 bytes)
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 736MB = 736MB total
Memory: 601736k/601736k available, 151928k reserved, 0K highmem
Virtual kernel memory layout:
vector : 0xffff0000 - 0xffff1000 ( 4 kB)
fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
DMA : 0xfe800000 - 0xffe00000 ( 22 MB)
vmalloc : 0xee800000 - 0xf6000000 ( 120 MB)
lowmem : 0xc0000000 - 0xee000000 ( 736 MB)
modules : 0xbf000000 - 0xc0000000 ( 16 MB)
.text : 0xc0008000 - 0xc078fd14 (7712 kB)
.init : 0xc0790000 - 0xc07d5980 ( 279 kB)
.data : 0xc07d6000 - 0xc0835930 ( 383 kB)
.bss : 0xc0835954 - 0xc098bca8 (1369 kB)
Preemptible hierarchical RCU implementation.
NR_IRQS:624
sched_clock: 32 bits at 50MHz, resolution 20ns, wraps every 85899ms
Console: colour dummy device 80x30
console <tty0] enabled
6>console [ttySAC2] enabled
console [tt<SAC2] enabled
6>Calibrating delay loop... Calibrating delay loop... <c>1992.29
BogoMIPS (lpj=4980736)
1992.29 BogoMIPS<(lpj=4980736)
6>pid_max: default: 32768 minimum: 301
pid_max: default: 32768 minimum: 301
<6>Mount-cache hash table entries: 512
Mount-cache hash table entries: 512
<6>CPU: Testing write buffer coherency: CPU: Testing write buffer
coherency: ok
ok
<6>ftrace: allocating 19856 entries in 59 pages
ftrace: allocating 19856 entries in 59 pages
<6>CPU0: thread -1, cpu 0, socket 9, mpidr 80000900
CPU0: thread -1, cpu 0, socket 9, <pidr 80000900
6>Calibrating local timer... Calibrating local timer... 249.93MHz.
249.93MHz.
<6>hw perfevents: enabled with ARMv7 Cortex-A9 PMU driver, 7
counters available
hw perfevents: enabled with ARMv7 Cortex-A9 PMU driver, 7 counters
available
<6>L310 cache controller enabled
L310 cache cont<oller enabled
6>l2x0: 16 ways, CACHE_ID 0x4100c4c5, AUX_CTRL 0x7e470001, Cache
size: 1048576 B
l2x0: 16 ways, CACHE_ID 0x4100c4c5, AUX_CTRL 0x7e470001, Cache size:
1048576 B
CPU1: Booted secondary processor
<2>CPU1: Unknown IPI message 0x1____

_______________________________________________
linaro-android mailing list
linaro-android@lists.linaro.org <mailto:linaro-android@lists.linaro.org>
http://lists.linaro.org/mailman/listinfo/linaro-android____

__ __

_______________________________________________
linaro-android mailing list
linaro-android@lists.linaro.org <mailto:linaro-android@lists.linaro.org>

http://lists.linaro.org/mailman/listinfo/linaro-android

_______________________________________________
linaro-android mailing list
linaro-android@lists.linaro.org
http://lists.linaro.org/mailman/listinfo/linaro-android

_______________________________________________
linaro-android mailing list
linaro-android@lists.linaro.org
http://lists.linaro.org/mailman/listinfo/linaro-android