root@android:/ # dmesg <5>Linux version 3.0.4+ (jenkins-build@ip-10-140-6-146) (gcc version 4.6.3 20120201 (prerelease) (Linaro GCC 4.6-2012.02) ) #1 SMP PREEMPT Fri Feb 17 09:34:26 UTC 2012 <4>CPU: ARMv7 Processor [412fc091] revision 1 (ARMv7), cr=10c5387f <4>CPU: VIPT nonaliasing data cache, VIPT aliasing instruction cache <4>Machine: ORIGEN <4>Ignoring unrecognised tag 0x00000000 <4>Ignoring unrecognised tag 0x00000000 <4>Ignoring unrecognised tag 0x00000000 <4>Ignoring unrecognised tag 0x00000000 <5>Truncating RAM at 60000000-7fffffff to -6dffffff (vmalloc region overlap). <3>CMA reserve : jpeg, addr is 0x5e800000, size is 0x1800000 <3>CMA reserve : fimc0, addr is 0x5e300000, size is 0x500000 <3>CMA reserve : fimc1, addr is 0x5de00000, size is 0x500000 <3>CMA reserve : fimc2, addr is 0x5d900000, size is 0x500000 <3>CMA reserve : fimc3, addr is 0x5d400000, size is 0x500000 <3>CMA reserve : fimd, addr is 0x5bc00000, size is 0x1800000 <3>CMA reserve : common, addr is 0x57c00000, size is 0x4000000 <3>CMA reserve : (null), addr is 0x57c00000, size is 0x0 <4>Memory policy: ECC disabled, Data cache writealloc <4>CPU EXYNOS4210 (id 0x43210010) <7>exynos4_init_clocks: initializing clocks <6>S3C24XX Clocks, Copyright 2004 Simtec Electronics <3>s3c_register_clksrc: clock armclk has no registers set <3>mout_audss: bad source 0 <7>exynos4_setup_clocks: registering clocks <7>exynos4_setup_clocks: xtal is 24000000 <6>EXYNOS4: PLL settings, A=1000000000, M=800000000, E=96000000 V=108000000 <6>EXYNOS4: ARMCLK=1000000000, DMC=400000000, ACLK200=200000000 <6>ACLK100=100000000, ACLK160=160000000, ACLK133=133333333 <6>uclk1: source is mout_mpll (6), rate is 100000000 <6>uclk1: source is mout_mpll (6), rate is 100000000 <6>uclk1: source is mout_mpll (6), rate is 100000000 <6>uclk1: source is mout_mpll (6), rate is 100000000 <6>sclk_pwm: source is ext_xtal (0), rate is 24000000 <6>sclk_csis: source is xusbxti (1), rate is 0 <6>sclk_csis: source is xusbxti (1), rate is 0 <6>sclk_cam0: source is xusbxti (1), rate is 0 <6>sclk_cam1: source is xusbxti (1), rate is 0 <6>sclk_fimc: source is xusbxti (1), rate is 0 <6>sclk_fimc: source is xusbxti (1), rate is 0 <6>sclk_fimc: source is xusbxti (1), rate is 0 <6>sclk_fimc: source is xusbxti (1), rate is 0 <6>sclk_mixer: source is sclk_dac (0), rate is 24000000 <6>sclk_fimd0: source is xusbxti (1), rate is 0 <6>sclk_fimd1: source is xusbxti (1), rate is 0 <6>sclk_sata: source is mout_mpll (0), rate is 133333333 <6>sclk_spi: source is xusbxti (1), rate is 0 <6>sclk_spi: source is mout_mpll (6), rate is 80000000 <6>sclk_spi: source is xusbxti (1), rate is 0 <6>sclk_fimg2d: source is mout_g2d0 (0), rate is 100000000 <7>On node 0 totalpages: 188416 <7> Normal zone: 1472 pages used for memmap <7> Normal zone: 0 pages reserved <7> Normal zone: 186944 pages, LIFO batch:31 <6>PERCPU: Embedded 7 pages/cpu @c0f96000 s6528 r8192 d13952 u32768 <7>pcpu-alloc: s6528 r8192 d13952 u32768 alloc=8*4096 <7>pcpu-alloc: [0] 0 [0] 1 <4>Built 1 zonelists in Zone order, mobility grouping on. Total pages: 186944 <5>Kernel command line: console=tty0 console=ttySAC2,115200n8 rootwait ro init=/init androidboot.console=ttySAC2 console=ttySAC2 root=/dev/mmcblk0p2 <5> <6>PID hash table entries: 4096 (order: 2, 16384 bytes) <6>Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) <6>Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) <6>Memory: 736MB = 736MB total <5>Memory: 601736k/601736k available, 151928k reserved, 0K highmem <5>Virtual kernel memory layout: <5> vector : 0xffff0000 - 0xffff1000 ( 4 kB) <5> fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB) <5> DMA : 0xfe800000 - 0xffe00000 ( 22 MB) <5> vmalloc : 0xee800000 - 0xf6000000 ( 120 MB) <5> lowmem : 0xc0000000 - 0xee000000 ( 736 MB) <5> modules : 0xbf000000 - 0xc0000000 ( 16 MB) <5> .text : 0xc0008000 - 0xc078fd14 (7712 kB) <5> .init : 0xc0790000 - 0xc07d5980 ( 279 kB) <5> .data : 0xc07d6000 - 0xc0835930 ( 383 kB) <5> .bss : 0xc0835954 - 0xc098bca8 (1369 kB) <6>Preemptible hierarchical RCU implementation. <6>NR_IRQS:624 <6>sched_clock: 32 bits at 50MHz, resolution 20ns, wraps every 85899ms <6>Console: colour dummy device 80x30 <6>console [tty0] enabled <6>console [ttySAC2] enabled <6>Calibrating delay loop... 1992.29 BogoMIPS (lpj=4980736) <6>pid_max: default: 32768 minimum: 301 <6>Mount-cache hash table entries: 512 <6>CPU: Testing write buffer coherency: ok <6>ftrace: allocating 19856 entries in 59 pages <6>CPU0: thread -1, cpu 0, socket 9, mpidr 80000900 <6>Calibrating local timer... 249.93MHz. <6>hw perfevents: enabled with ARMv7 Cortex-A9 PMU driver, 7 counters available <6>L310 cache controller enabled <6>l2x0: 16 ways, CACHE_ID 0x4100c4c5, AUX_CTRL 0x7e470001, Cache size: 1048576 B <4>CPU1: Booted secondary processor <2>CPU1: Unknown IPI message 0x1 <6>CPU1: thread -1, cpu 1, socket 9, mpidr 80000901 <6>Brought up 2 CPUs <6>SMP: Total of 2 processors activated (3984.58 BogoMIPS). <6>print_constraints: dummy: <6>NET: Registered protocol family 16 <6>hw-breakpoint: found 6 breakpoint and 1 watchpoint registers. <6>hw-breakpoint: 1 breakpoint(s) reserved for watchpoint single-step. <6>hw-breakpoint: maximum watchpoint size is 4 bytes. <4>S3C Power Management, Copyright 2004 Simtec Electronics <6>EXYNOS4: Initializing architecture <6>s3c24xx-pwm s3c24xx-pwm.0: tin at 50000000, tdiv at 50000000, tin=divclk, base 0 <6>bio: create slab at 0 <5>SCSI subsystem initialized <6>usbcore: registered new interface driver usbfs <6>usbcore: registered new interface driver hub <6>usbcore: registered new device driver usb <6>s3c-i2c s3c2440-i2c.0: slave address 0x10 <6>s3c-i2c s3c2440-i2c.0: bus frequency set to 97 KHz <6>print_constraints: VDD_33_ABB: 3300 mV <6>print_constraints: VDD_11ON: 1100 mV <6>print_constraints: VDD_11OFF: 1100 mV <6>print_constraints: VDD_18ON: 1800 mV <6>print_constraints: VDD_18OFF: 1800 mV <6>print_constraints: VDD_18AUD: 1800 mV <6>print_constraints: VDD_33OFF: 3300 mV <6>print_constraints: VDD_33ON: 3000 mV <6>print_constraints: VDD_11ON_PLL: 1100 mV <6>print_constraints: VDD_AUD: 3000 mV <6>print_constraints: AVDD18_SWB: 1800 mV <6>print_constraints: VDD_33ON_LAN: 3300 mV <6>print_constraints: VDD_33OFF_EXT1: 3300 mV <6>print_constraints: VDD33_SWB: 3300 mV <6>print_constraints: VDD_33OFF_EXT2: 3300 mV <6>print_constraints: VDD_MIF: 1200 mV <6>print_constraints: VDD_ARM: 1250 mV <6>print_constraints: VDD_INT: 750 <--> 1100 mV at 1100 mV <6>print_constraints: VDD_G3D: 900 <--> 1200 mV at 1100 mV <6>print_constraints: VDD_M15OFF: 1500 mV <6>print_constraints: VDD_33OFF_EXT3: 3300 mV <6>s3c-i2c s3c2440-i2c.0: i2c-0: S3C I2C adapter <6>s3c-i2c s3c2440-i2c.1: slave address 0x10 <6>s3c-i2c s3c2440-i2c.1: bus frequency set to 97 KHz <6>s3c-i2c s3c2440-i2c.1: i2c-1: S3C I2C adapter <6>s3c-i2c s3c2440-i2c.6: slave address 0x10 <6>s3c-i2c s3c2440-i2c.6: bus frequency set to 97 KHz <6>s3c-i2c s3c2440-i2c.6: i2c-6: S3C I2C adapter <6>Advanced Linux Sound Architecture Driver Version 1.0.24. <6>Bluetooth: Core ver 2.16 <6>NET: Registered protocol family 31 <6>Bluetooth: HCI device and connection manager initialized <6>Bluetooth: HCI socket layer initialized <6>Bluetooth: L2CAP socket layer initialized <6>Bluetooth: SCO socket layer initialized <6>cfg80211: Calling CRDA to update world regulatory domain <6>Switching to clocksource pwm_timer4 <6>Switched to NOHz mode on CPU #0 <6>Switched to NOHz mode on CPU #1 <6>NET: Registered protocol family 2 <6>IP route cache hash table entries: 32768 (order: 5, 131072 bytes) <6>TCP established hash table entries: 131072 (order: 8, 1048576 bytes) <6>TCP bind hash table entries: 65536 (order: 8, 1572864 bytes) <6>TCP: Hash tables configured (established 131072 bind 65536) <6>TCP reno registered <6>UDP hash table entries: 512 (order: 3, 32768 bytes) <6>UDP-Lite hash table entries: 512 (order: 3, 32768 bytes) <6>NET: Registered protocol family 1 <6>RPC: Registered named UNIX socket transport module. <6>RPC: Registered udp transport module. <6>RPC: Registered tcp transport module. <6>RPC: Registered tcp NFSv4.1 backchannel transport module. <6>Trying to unpack rootfs image as initramfs... <6>Freeing initrd memory: 160K <4>NetWinder Floating Point Emulator V0.97 (double precision) <6>PMU: registered new PMU device of type 0 <6>Loaded driver for PL330 DMAC-0 s3c-pl330 <6> DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32 <6>Loaded driver for PL330 DMAC-1 s3c-pl330 <6> DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32 <6>ashmem: initialized <6>ROMFS MTD (C) 2007 Red Hat, Inc. <6>msgmni has been set to 1175 <6>io scheduler noop registered <6>io scheduler deadline registered <6>io scheduler cfq registered (default) <6>start plist test <6>end plist test <6>Console: switching to colour frame buffer device 128x37 <6>FIMD src sclk = 114285714 <4>LTE480VW: Backlight enabled <6>s3cfb s3cfb: registered successfully <6>Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled <6>s5pv210-uart.0: ttySAC0 at MMIO 0x13800000 (irq = 16) is a S3C6400/10 <6>s5pv210-uart.1: ttySAC1 at MMIO 0x13810000 (irq = 20) is a S3C6400/10 <6>s5pv210-uart.2: ttySAC2 at MMIO 0x13820000 (irq = 24) is a S3C6400/10 <6>s5pv210-uart.3: ttySAC3 at MMIO 0x13830000 (irq = 28) is a S3C6400/10 <6>[drm] Initialized drm 1.1.0 20060810 <4>Mali: Mali device driver loaded <4>UMP: UMP device driver loaded <6>brd: module loaded <6>loop: module loaded <6>usbcore: registered new interface driver catc <6>catc: v2.8:CATC EL1210A NetMate USB Ethernet driver <6>usbcore: registered new interface driver kaweth <6>pegasus: v0.6.14 (2006/09/27), Pegasus/Pegasus II USB Ethernet driver <6>usbcore: registered new interface driver pegasus <6>rtl8150: v0.6.2 (2004/08/27):rtl8150 based usb-ethernet driver <6>usbcore: registered new interface driver rtl8150 <6>usbcore: registered new interface driver asix <6>usbcore: registered new interface driver cdc_ether <6>usbcore: registered new interface driver dm9601 <6>usbcore: registered new interface driver smsc75xx <6>usbcore: registered new interface driver smsc95xx <6>usbcore: registered new interface driver gl620a <6>usbcore: registered new interface driver net1080 <6>usbcore: registered new interface driver plusb <6>usbcore: registered new interface driver cdc_subset <6>usbcore: registered new interface driver zaurus <6>usbcore: registered new interface driver MOSCHIP usb-ethernet driver <6>usbcore: registered new interface driver int51x1 <6>usbcore: registered new interface driver kalmia <6>usbcore: registered new interface driver cx82310_eth <6>ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver <6>s5p-ehci s5p-ehci: S5P EHCI Host Controller <6>s5p-ehci s5p-ehci: new USB bus registered, assigned bus number 1 <6>s5p-ehci s5p-ehci: irq 109, io mem 0x12580000 <6>s5p-ehci s5p-ehci: USB 0.0 started, EHCI 1.00 <6>hub 1-0:1.0: USB hub found <6>hub 1-0:1.0: 3 ports detected <6>ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver <6>s5p-ohci s5p-ohci: Samsung OHCI Host Controller <6>s5p-ohci s5p-ohci: new USB bus registered, assigned bus number 2 <6>s5p-ohci s5p-ohci: irq 109, io mem 0x12590000 <6>hub 2-0:1.0: USB hub found <6>hub 2-0:1.0: 3 ports detected <6>Initializing USB Mass Storage driver... <6>usbcore: registered new interface driver usb-storage <6>USB Mass Storage support registered. <6>s3c-udc : S3C HS USB OTG Device Driver,(c) 2008-2009 Samsung Electronics <6>s3c-udc : version 15 March 2009 (DMA Mode) <6>android_usb gadget: Mass Storage Function, version: 2009/09/11 <6>android_usb gadget: Number of LUNs=1 <6> lun0: LUN: removable file: (no medium) <6>android_usb gadget: android_usb ready <6>Registered gadget driver 'android_usb' <6>mousedev: PS/2 mouse device common for all mice <6>input: gpio-keys as /devices/platform/gpio-keys.0/input/input0 <6>input: unidisplay_ts as /devices/platform/s3c2440-i2c.0/i2c-0/0-0041/input/input1 <6>Unidisplay touch driver registered successfully <4>S3C24XX RTC, (c) 2004,2006 Simtec Electronics <6>s3c-rtc s3c64xx-rtc: rtc disabled, re-enabling <6>using rtc device, s3c, for alarms <6>s3c-rtc s3c64xx-rtc: rtc core: registered s3c as rtc0 <4>s3c-rtc s3c64xx-rtc: warning: invalid RTC value so initializing it <6>i2c /dev entries driver <6>Linux media interface: v0.10 <6>Linux video capture interface: v2.00 <4>Initialize JPEG driver <4> <4>JPEG driver successfully probed.. <7>[fimg2d_power_on] clock enable <6>FIMG2D PM runtime enable <6>Samsung Graphics 2D driver, (c) 2010 Samsung Electronics <4>i2c-core: driver [s5p_ddc] using legacy suspend method <4>i2c-core: driver [s5p_ddc] using legacy resume method <6>S5P HPD for TVOUT Driver, Copyright (c) 2011 Samsung Electronics Co., LTD. <6>initialised variables <6>S5P CEC for TVOUT Driver, Copyright (c) 2011 Samsung Electronics Co., LTD. <6>usbcore: registered new interface driver uvcvideo <6>USB Video Class driver (v1.1.0) <7>power_supply test_ac: uevent <7>power_supply test_ac: POWER_SUPPLY_NAME=test_ac <7>power_supply test_ac: prop ONLINE=1 <7>power_supply test_ac: power_supply_changed <7>power_supply test_ac: power_supply_changed_work <7>power_supply test_battery: uevent <7>power_supply test_battery: POWER_SUPPLY_NAME=test_battery <7>power_supply test_ac: uevent <7>power_supply test_ac: POWER_SUPPLY_NAME=test_ac <7>power_supply test_ac: prop ONLINE=1 <7>power_supply test_battery: prop STATUS=Discharging <7>power_supply test_battery: prop CHARGE_TYPE=Fast <7>power_supply test_battery: prop HEALTH=Good <7>power_supply test_battery: prop PRESENT=1 <7>power_supply test_battery: prop TECHNOLOGY=Li-ion <7>power_supply test_battery: prop CHARGE_FULL_DESIGN=100 <7>power_supply test_battery: prop CHARGE_FULL=100 <7>power_supply test_battery: prop CHARGE_NOW=50 <7>power_supply test_battery: prop CAPACITY=50 <7>power_supply test_battery: prop CAPACITY_LEVEL=Normal <7>power_supply test_battery: prop TIME_TO_EMPTY_AVG=3600 <7>power_supply test_battery: prop TIME_TO_FULL_NOW=3600 <7>power_supply test_battery: prop MODEL_NAME=Test battery <7>power_supply test_battery: prop MANUFACTURER=Linux <7>power_supply test_battery: prop SERIAL_NUMBER=3.0.4+ <7>power_supply test_battery: power_supply_changed <7>power_supply test_battery: power_supply_changed_work <7>power_supply test_battery: uevent <6>S3C2410 Watchdog Timer, (c) 2004 Simtec Electronics <7>power_supply test_battery: POWER_SUPPLY_NAME=test_battery <7>power_supply test_battery: prop STATUS=Discharging <6>s3c2410-wdt s3c2410-wdt: watchdog inactive, reset disabled, irq enabled <7>power_supply test_battery: prop CHARGE_TYPE=Fast <7>power_supply test_battery: prop HEALTH=Good <7>power_supply test_battery: prop PRESENT=1 <7>power_supply test_battery: prop TECHNOLOGY=Li-ion <6>device-mapper: uevent: version 1.0.3 <7>power_supply test_battery: prop CHARGE_FULL_DESIGN=100 <7>power_supply test_battery: prop CHARGE_FULL=100 <7>power_supply test_battery: prop CHARGE_NOW=50 <7>power_supply test_battery: prop CAPACITY=50 <7>power_supply test_battery: prop CAPACITY_LEVEL=Normal <6>device-mapper: ioctl: 4.20.0-ioctl (2011-02-02) initialised: dm-devel@redhat.com <6>Bluetooth: HCI UART driver ver 2.2 <7>power_supply test_battery: prop TIME_TO_EMPTY_AVG=3600 <7>power_supply test_battery: prop TIME_TO_FULL_NOW=3600 <7>power_supply test_battery: prop MODEL_NAME=Test battery <6>Bluetooth: HCI BCSP protocol initialized <6>sdhci: Secure Digital Host Controller Interface driver <6>sdhci: Copyright(c) Pierre Ossman <6>s3c-sdhci s3c-sdhci.2: clock source 2: sclk_mmc (50000000 Hz) <4>_regulator_get: s3c-sdhci.2 supply vmmc not found, using dummy regulator <6>mmc0: SDHCI controller on samsung-hsmmc [s3c-sdhci.2] using ADMA <6>s3c-sdhci s3c-sdhci.0: clock source 2: sclk_mmc (50000000 Hz) <4>_regulator_get: s3c-sdhci.0 supply vmmc not found, using dummy regulator <7>power_supply test_battery: prop MANUFACTURER=Linux <6>mmc1: SDHCI controller on samsung-hsmmc [s3c-sdhci.0] using ADMA <6>s3c-sdhci s3c-sdhci.3: clock source 2: sclk_mmc (50000000 Hz) <4>_regulator_get: s3c-sdhci.3 supply vmmc not found, using dummy regulator <6>mmc2: SDHCI controller on samsung-hsmmc [s3c-sdhci.3] using ADMA <6>usbcore: registered new interface driver usbhid <6>usbhid: USB HID core driver <7>power_supply test_battery: prop SERIAL_NUMBER=3.0.4+ <6>logger: created 256K log 'log_main' <6>logger: created 256K log 'log_events' <6>logger: created 256K log 'log_radio' <6>logger: created 256K log 'log_system' <6>mmc0: new SDHC card at address b368 <6>mmcblk0: mmc0:b368 NCard 3.73 GiB <6>asoc: rt5625-aif1 <-> samsung-i2s.0 mapping ok <6>ALSA device list: <6> mmcblk0: p1 p2 p3 p4 < p5 p6 p7 > <6> #0: ORIGEN-I2S <6>oprofile: using arm/armv7-ca9 <6>Netfilter messages via NETLINK v0.30. <6>nf_conntrack version 0.5.0 (9404 buckets, 37616 max) <6>ip_tables: (C) 2000-2006 Netfilter Core Team <6>TCP cubic registered <6>Initializing XFRM netlink socket <6>NET: Registered protocol family 10 <6>Mobile IPv6 <6>IPv6 over IPv4 tunneling driver <6>NET: Registered protocol family 17 <6>NET: Registered protocol family 15 <6>Bluetooth: RFCOMM TTY layer initialized <6>Bluetooth: RFCOMM socket layer initialized <6>Bluetooth: RFCOMM ver 1.11 <6>Bluetooth: BNEP (Ethernet Emulation) ver 1.3 <6>Bluetooth: BNEP filters: protocol multicast <6>Bluetooth: HIDP (Human Interface Emulation) ver 1.2 <6>lib80211: common routines for IEEE802.11 drivers <7>lib80211_crypt: registered algorithm 'NULL' <6>rfkill_gpio rfkill_gpio: origen-bt device registered. <6>VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 2 <5>Registering SWP/SWPB emulation handler <6>s3c-rtc s3c64xx-rtc: setting system clock to 2000-01-01 00:00:01 UTC (946684801) <3>fimc_probe: registered fimc controller <3>fimc_probe: registered fimc controller <3>fimc_probe: registered fimc controller <6>S5P TVOUT Driver, Copyright (c) 2011 Samsung Electronics Co., LTD. <4>[s5p_tvout.c] : s5p_tvout_probe() <6> The frame buffer is allocated here <4>s5p_tvout_fb_map_video_memory called <4>smem_length = 8294400 <6>Freeing init memory: 276K <7>power_supply test_ac: uevent <7>power_supply test_ac: POWER_SUPPLY_NAME=test_ac <7>power_supply test_ac: prop ONLINE=1 <7>power_supply test_battery: uevent <7>power_supply test_battery: POWER_SUPPLY_NAME=test_battery <7>power_supply test_battery: prop STATUS=Discharging <7>power_supply test_battery: prop CHARGE_TYPE=Fast <7>power_supply test_battery: prop HEALTH=Good <7>power_supply test_battery: prop PRESENT=1 <7>power_supply test_battery: prop TECHNOLOGY=Li-ion <7>power_supply test_battery: prop CHARGE_FULL_DESIGN=100 <7>power_supply test_battery: prop CHARGE_FULL=100 <7>power_supply test_battery: prop CHARGE_NOW=50 <7>power_supply test_battery: prop CAPACITY=50 <7>power_supply test_battery: prop CAPACITY_LEVEL=Normal <7>power_supply test_battery: prop TIME_TO_EMPTY_AVG=3600 <7>power_supply test_battery: prop TIME_TO_FULL_NOW=3600 <7>power_supply test_battery: prop MODEL_NAME=Test battery <7>power_supply test_battery: prop MANUFACTURER=Linux <7>power_supply test_battery: prop SERIAL_NUMBER=3.0.4+ <6>EXT4-fs (mmcblk0p3): mounted filesystem with ordered data mode. Opts: (null) <6>EXT4-fs (mmcblk0p5): mounted filesystem with ordered data mode. Opts: (null) <6>EXT4-fs (mmcblk0p6): mounted filesystem with ordered data mode. Opts: (null) <3>android_usb: already disabled <6>adb_bind_config <3>init: cannot find '/system/etc/install-recovery.sh', disabling 'flash_recovery' <6>adb_bind_config <6>adb_bind_config <6>adb_open <6>warning: `rild' uses 32-bit capabilities (legacy support in use) <4>er.ServerThread (2200): /proc/2187/oom_adj is deprecated, please use /proc/2187/oom_score_adj instead. <6>request_suspend_state: wakeup (3->0) at 40290238363 (2000-01-01 00:00:38.640497462 UTC) <3>Unidisplay Touch Driver 0-0041: Unable to open touchscreen device <3>Unidisplay Touch Driver 0-0041: Unable to open touchscreen device <3>Unidisplay Touch Driver 0-0041: Unable to open touchscreen device <3>init: no such service 'dhcpcd_ip6tnl0' <3>init: no such service 'dhcpcd_ip6tnl0:-h android-9698696844266af6 ip6tnl0' <6>acc_open <6>acc_release <3>Bluetooth: Out-of-order packet arrived, got 1 expected 0 root@android:/ #