>>
>> and placed it into the SD card slot. I flicked the power switch and
>> pressed SWITCH then POWER and saw the board booting in terminal. However,
>> after a short period of time LED4 turns off and I do not see the LCD light
>> or show the Android screen.
>
> Do you mean LCD and Android UI doesn't come up at all or they turned off
> after some time?
>>
>> The output in terminal is given below. Is my board faulty or have I not
>> flashed the correct image to the SD card ?
>
> If this output is all you have got then there is definitely something wrong
> somewhere. Did you try booting Linaro's Ubuntu images on Origen?
>
> Regards,
> Amit Pundir
>>
>> U-Boot 2011.06-01275-gd6186aa (Feb 17 2012 - 08:54:12) for ORIGEN
>>
>> CPU: S5PC210@1000MHz
>>
>> Board: ORIGEN
>> DRAM: 1 GiB
>> WARNING: Caches not enabled
>> MMC: SAMSUNG SD/MMC: 0
>> *** Warning - bad CRC, using default environment
>>
>> In: serial
>> Out: serial
>> Err: serial
>> Hit any key to stop autoboot: 0
>> reading boot.scr
>>
>> 397 bytes read
>> Running bootscript from mmc0:2 ...
>> ## Executing script at 42000000
>> reading uImage
>>
>> 4049424 bytes read
>> reading uInitrd
>>
>> 166156 bytes read
>> ## Booting kernel from Legacy Image at 40007000 ...
>> Image Name: Linux-3.0.4+
>> Image Type: ARM Linux Kernel Image (uncompressed)
>> Data Size: 4049360 Bytes = 3.9 MiB
>> Load Address: 40008000
>> Entry Point: 40008000
>> Verifying Checksum ... OK
>> ## Loading init Ramdisk from Legacy Image at 42000000 ...
>> Image Name: Android Ramdisk Image
>> Image Type: ARM Linux RAMDisk Image (gzip compressed)
>> Data Size: 166092 Bytes = 162.2 KiB
>> Load Address: 00000000
>> Entry Point: 00000000
>> Verifying Checksum ... OK
>> Loading Kernel Image ... OK
>> OK
>>
>> Starting kernel ...
>>
>> Uncompressing Linux... done, booting the kernel.
>> <5>Linux version 3.0.4+ (jenkins-build@ip-10-140-6-146) (gcc version 4.6.3
>> 20120201 (prerelease) (Linaro GCC 4.6-2012.02) ) #1 SMP PREEMPT Fri Feb 17
>> 09:34:26 UTC 2012
>> CPU: ARMv7 Processor [412fc091] revision 1 (ARMv7), cr=10c5387f
>> CPU: VIPT nonaliasing data cache, VIPT aliasing instruction cache
>> Machine: ORIGEN
>> <4>Ignoring unrecognised tag 0x00000000
>> <4>Ignoring unrecognised tag 0x00000000
>> <4>Ignoring unrecognised tag 0x00000000
>> <4>Ignoring unrecognised tag 0x00000000
>> <5>Truncating RAM at 60000000-7fffffff to -6dffffff (vmalloc region
>> overlap).
>> <3>CMA reserve : jpeg, addr is 0x5e800000, size is 0x1800000
>> <3>CMA reserve : fimc0, addr is 0x5e300000, size is 0x500000
>> <3>CMA reserve : fimc1, addr is 0x5de00000, size is 0x500000
>> <3>CMA reserve : fimc2, addr is 0x5d900000, size is 0x500000
>> <3>CMA reserve : fimc3, addr is 0x5d400000, size is 0x500000
>> <3>CMA reserve : fimd, addr is 0x5bc00000, size is 0x1800000
>> <3>CMA reserve : common, addr is 0x57c00000, size is 0x4000000
>> <3>CMA reserve : (null), addr is 0x57c00000, size is 0x0
>> Memory policy: ECC disabled, Data cache writealloc
>> CPU EXYNOS4210 (id 0x43210011)
>> <7>exynos4_init_clocks: initializing clocks
>> <6>S3C24XX Clocks, Copyright 2004 Simtec Electronics
>> <3>s3c_register_clksrc: clock armclk has no registers set
>> <3>mout_audss: bad source 0
>> <7>exynos4_setup_clocks: registering clocks
>> <7>exynos4_setup_clocks: xtal is 24000000
>> <6>EXYNOS4: PLL settings, A=1000000000, M=800000000, E=96000000
>> V=108000000<6>EXYNOS4: ARMCLK=1000000000, DMC=400000000, ACLK200=200000000
>> ACLK100=100000000, ACLK160=160000000, ACLK133=133333333
>> <6>uclk1: source is mout_mpll (6), rate is 100000000
>> <6>uclk1: source is mout_mpll (6), rate is 100000000
>> <6>uclk1: source is mout_mpll (6), rate is 100000000
>> <6>uclk1: source is mout_mpll (6), rate is 100000000
>> <6>sclk_pwm: source is ext_xtal (0), rate is 24000000
>> <6>sclk_csis: source is xusbxti (1), rate is 0
>> <6>sclk_csis: source is xusbxti (1), rate is 0
>> <6>sclk_cam0: source is xusbxti (1), rate is 0
>> <6>sclk_cam1: source is xusbxti (1), rate is 0
>> <6>sclk_fimc: source is xusbxti (1), rate is 0
>> <6>sclk_fimc: source is xusbxti (1), rate is 0
>> <6>sclk_fimc: source is xusbxti (1), rate is 0
>> <6>sclk_fimc: source is xusbxti (1), rate is 0
>> <6>sclk_mixer: source is sclk_dac (0), rate is 24000000
>> <6>sclk_fimd0: source is xusbxti (1), rate is 0
>> <6>sclk_fimd1: source is xusbxti (1), rate is 0
>> <6>sclk_sata: source is mout_mpll (0), rate is 133333333
>> <6>sclk_spi: source is xusbxti (1), rate is 0
>> <6>sclk_spi: source is mout_mpll (6), rate is 80000000
>> <6>sclk_spi: source is xusbxti (1), rate is 0
>> <6>sclk_fimg2d: source is mout_g2d0 (0), rate is 100000000
>> <7>On node 0 totalpages: 188416
>> <7> Normal zone: 1472 pages used for memmap
>> <7> Normal zone: 0 pages reserved
>> <7> Normal zone: 186944 pages, LIFO batch:31
>> <6>PERCPU: Embedded 7 pages/cpu @c0f96000 s6528 r8192 d13952 u32768
>> <7>pcpu-alloc: s6528 r8192 d13952 u32768 alloc=8*4096
>> <7>pcpu-alloc: [0] 0 [0] 1
>> Built 1 zonelists in Zone order, mobility grouping on. Total pages: 186944
>> <5>Kernel command line: console=tty0 console=ttySAC2,115200n8 rootwait ro
>> init=/init androidboot.console=ttySAC2 console=ttySAC2 root=/dev/mmcblk0p2
>>
>> <6>PID hash table entries: 4096 (order: 2, 16384 bytes)
>> <6>Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
>> <6>Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
>> <6>Memory: 736MB = 736MB total
>> <5>Memory: 601736k/601736k available, 151928k reserved, 0K highmem
>> <5>Virtual kernel memory layout:
>> vector : 0xffff0000 - 0xffff1000 ( 4 kB)
>> fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
>> DMA : 0xfe800000 - 0xffe00000 ( 22 MB)
>> vmalloc : 0xee800000 - 0xf6000000 ( 120 MB)
>> lowmem : 0xc0000000 - 0xee000000 ( 736 MB)
>> modules : 0xbf000000 - 0xc0000000 ( 16 MB)
>> .text : 0xc0008000 - 0xc078fd14 (7712 kB)
>> .init : 0xc0790000 - 0xc07d5980 ( 279 kB)
>> .data : 0xc07d6000 - 0xc0835930 ( 383 kB)
>> .bss : 0xc0835954 - 0xc098bca8 (1369 kB)
>> <6>Preemptible hierarchical RCU implementation.
>> <6>NR_IRQS:624
>> <6>sched_clock: 32 bits at 50MHz, resolution 20ns, wraps every 85899ms
>> <6>Console: colour dummy device 80x30
>> <6>console [tty0] enabled
>> Linux version 3.0.4+ (jenkins-build@ip-10-140-6-146) (gcc version 4.6.3
>> 20120201 (prerelease) (Linaro GCC 4.6-2012.02) ) #1 SMP PREEMPT Fri Feb 17
>> 09:34:26 UTC 2012
>> CPU: ARMv7 Processor [412fc091] revision 1 (ARMv7), cr=10c5387f
>> CPU: VIPT nonaliasing data cache, VIPT aliasing instruction cache
>> Machine: ORIGEN
>> Ignoring unrecognised tag 0x00000000
>> Ignoring unrecognised tag 0x00000000
>> Ignoring unrecognised tag 0x00000000
>> Ignoring unrecognised tag 0x00000000
>> Truncating RAM at 60000000-7fffffff to -6dffffff (vmalloc region overlap).
>> CMA reserve : jpeg, addr is 0x5e800000, size is 0x1800000
>> CMA reserve : fimc0, addr is 0x5e300000, size is 0x500000
>> CMA reserve : fimc1, addr is 0x5de00000, size is 0x500000
>> CMA reserve : fimc2, addr is 0x5d900000, size is 0x500000
>> CMA reserve : fimc3, addr is 0x5d400000, size is 0x500000
>> CMA reserve : fimd, addr is 0x5bc00000, size is 0x1800000
>> CMA reserve : common, addr is 0x57c00000, size is 0x4000000
>> CMA reserve : (null), addr is 0x57c00000, size is 0x0
>> Memory policy: ECC disabled, Data cache writealloc
>> CPU EXYNOS4210 (id 0x43210011)
>> S3C24XX Clocks, Copyright 2004 Simtec Electronics
>> s3c_register_clksrc: clock armclk has no registers set
>> mout_audss: bad source 0
>> EXYNOS4: PLL settings, A=1000000000, M=800000000, E=96000000 V=108000000
>> EXYNOS4: ARMCLK=1000000000, DMC=400000000, ACLK200=200000000
>> ACLK100=100000000, ACLK160=160000000, ACLK133=133333333
>> uclk1: source is mout_mpll (6), rate is 100000000
>> uclk1: source is mout_mpll (6), rate is 100000000
>> uclk1: source is mout_mpll (6), rate is 100000000
>> uclk1: source is mout_mpll (6), rate is 100000000
>> sclk_pwm: source is ext_xtal (0), rate is 24000000
>> sclk_csis: source is xusbxti (1), rate is 0
>> sclk_csis: source is xusbxti (1), rate is 0
>> sclk_cam0: source is xusbxti (1), rate is 0
>> sclk_cam1: source is xusbxti (1), rate is 0
>> sclk_fimc: source is xusbxti (1), rate is 0
>> sclk_fimc: source is xusbxti (1), rate is 0
>> sclk_fimc: source is xusbxti (1), rate is 0
>> sclk_fimc: source is xusbxti (1), rate is 0
>> sclk_mixer: source is sclk_dac (0), rate is 24000000
>> sclk_fimd0: source is xusbxti (1), rate is 0
>> sclk_fimd1: source is xusbxti (1), rate is 0
>> sclk_sata: source is mout_mpll (0), rate is 133333333
>> sclk_spi: source is xusbxti (1), rate is 0
>> sclk_spi: source is mout_mpll (6), rate is 80000000
>> sclk_spi: source is xusbxti (1), rate is 0
>> sclk_fimg2d: source is mout_g2d0 (0), rate is 100000000
>> PERCPU: Embedded 7 pages/cpu @c0f96000 s6528 r8192 d13952 u32768
>> Built 1 zonelists in Zone order, mobility grouping on. Total pages: 186944
>> Kernel command line: console=tty0 console=ttySAC2,115200n8 rootwait ro
>> init=/init androidboot.console=ttySAC2 console=ttySAC2 root=/dev/mmcblk0p2
>>
>> PID hash table entries: 4096 (order: 2, 16384 bytes)
>> Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
>> Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
>> Memory: 736MB = 736MB total
>> Memory: 601736k/601736k available, 151928k reserved, 0K highmem
>> Virtual kernel memory layout:
>> vector : 0xffff0000 - 0xffff1000 ( 4 kB)
>> fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
>> DMA : 0xfe800000 - 0xffe00000 ( 22 MB)
>> vmalloc : 0xee800000 - 0xf6000000 ( 120 MB)
>> lowmem : 0xc0000000 - 0xee000000 ( 736 MB)
>> modules : 0xbf000000 - 0xc0000000 ( 16 MB)
>> .text : 0xc0008000 - 0xc078fd14 (7712 kB)
>> .init : 0xc0790000 - 0xc07d5980 ( 279 kB)
>> .data : 0xc07d6000 - 0xc0835930 ( 383 kB)
>> .bss : 0xc0835954 - 0xc098bca8 (1369 kB)
>> Preemptible hierarchical RCU implementation.
>> NR_IRQS:624
>> sched_clock: 32 bits at 50MHz, resolution 20ns, wraps every 85899ms
>> Console: colour dummy device 80x30
>> console <tty0] enabled
>> 6>console [ttySAC2] enabled
>> console [tt<SAC2] enabled
>> 6>Calibrating delay loop... Calibrating delay loop... <c>1992.29 BogoMIPS
>> (lpj=4980736)
>> 1992.29 BogoMIPS<(lpj=4980736)
>> 6>pid_max: default: 32768 minimum: 301
>> pid_max: default: 32768 minimum: 301
>> <6>Mount-cache hash table entries: 512
>> Mount-cache hash table entries: 512
>> <6>CPU: Testing write buffer coherency: CPU: Testing write buffer
>> coherency: ok
>> ok
>> <6>ftrace: allocating 19856 entries in 59 pages
>> ftrace: allocating 19856 entries in 59 pages
>> <6>CPU0: thread -1, cpu 0, socket 9, mpidr 80000900
>> CPU0: thread -1, cpu 0, socket 9, <pidr 80000900
>> 6>Calibrating local timer... Calibrating local timer... 249.93MHz.
>> 249.93MHz.
>> <6>hw perfevents: enabled with ARMv7 Cortex-A9 PMU driver, 7 counters
>> available
>> hw perfevents: enabled with ARMv7 Cortex-A9 PMU driver, 7 counters
>> available
>> <6>L310 cache controller enabled
>> L310 cache cont<oller enabled
>> 6>l2x0: 16 ways, CACHE_ID 0x4100c4c5, AUX_CTRL 0x7e470001, Cache size:
>> 1048576 B
>> l2x0: 16 ways, CACHE_ID 0x4100c4c5, AUX_CTRL 0x7e470001, Cache size:
>> 1048576 B
>> CPU1: Booted secondary processor
>> <2>CPU1: Unknown IPI message 0x1
>>
>>
>> _______________________________________________
>> linaro-android mailing list
>>
linaro-android@lists.linaro.org
>>
http://lists.linaro.org/mailman/listinfo/linaro-android
>>
>
>
> _______________________________________________
> linaro-android mailing list
>
linaro-android@lists.linaro.org
>
http://lists.linaro.org/mailman/listinfo/linaro-android
>