Dear Fathi Boudra,

Thank you very much for your e-mails with explanations. I will go through it, surely. But, I have a basic question. Who will create the partitions on SD card? I did not create myself. I thought that your commands only create. I think, in STEP-3, I need to pass /dev/sdb instead of /dev/sdb1. Is this correct?

Please let me know about the creation of the partitions in SD card.

Thanks a lot.

Regards,
Srinivas G.

On Thu, Aug 9, 2012 at 12:11 PM, Fathi Boudra <fathi.boudra@linaro.org> wrote:
On 8 August 2012 19:02, Zach Pfeffer <zach.pfeffer@linaro.org> wrote:
> Srinivas,
>
> Please use the instructions on:
>
> https://android-build.linaro.org/builds/~linaro-android/panda-ics-gcc47-tilt-tracking-blob-12.07-release/

Those instructions are incomplete. They don't contain the binaries section.

@Srinivas: the instructions on releases.linaro.org are correct. I
pointed your mistakes in previous e-mails. Let me know if you need
further help.

> On 8 August 2012 10:21, Srinivas Ganji <srinivasganji.android@gmail.com> wrote:
>> Hi All,
>>
>> We have a Pandaboard ES model with us. We purchased the same last week. We
>> want to test board with the pre-built images from Linaro. So, we followed
>> the following steps.
>>
>> The main link is
>> http://releases.linaro.org/12.07/android/images/panda-ics-gcc47-tilt-stable-blob/
>>
>> STEPS:
>>
>> 1) wget
>> http://releases.linaro.org/12.07/android/images/panda-ics-gcc47-tilt-stable-blob/panda-ics-gcc47-tilt-stable-blob.img.gz
>> 2) gunzip panda-ics-gcc47-tilt-stable-blob.img.gz
>> 3) sudo dd bs=4M if=panda-ics-gcc47-tilt-stable-blob.img of=/dev/sdb1
>> 4) wget
>> http://releases.linaro.org/12.07/android/images/panda-ics-gcc47-tilt-stable-blob/install-binaries.sh
>> 5) chmod a+x install-binaries.sh
>> 6) ./install-binaries.sh /dev/sdb1
>>
>> After doing above steps, we inserted the SD card into the Pandaboard. We
>> also connected other peripherals like HDMI cable, USB Mouse, USB Keyboard,
>> Serial cable. The other end (DVI) is connected to the LED monitor. After
>> every thing is connected correctly, we connected the power cable. However,
>> we did not see any thing (display) in the LED monitor as well as Hyper
>> terminal.
>>
>> Are we missing any thing here? Are we followed the correct steps?
>>
>> Is the step-6 correct? Actually, it looks as follows.
>> $./install-binaries.sh /dev/sdX2 "device node of system partition"
>>
>> But, I do not understand about "device node of system partition".
>>
>> Please suggest us.
>>
>> Regards,
>> Srinivas G
>>
>> The output of the STEP-6.
>>
>> vendor/
>> vendor/imgtec/
>> vendor/imgtec/panda/
>> vendor/imgtec/panda/BoardConfigPanda.mk
>> vendor/imgtec/panda/proprietary/
>> vendor/imgtec/panda/proprietary/libsrv_init.so
>> vendor/imgtec/panda/proprietary/gralloc.omap4.so
>> vendor/imgtec/panda/proprietary/libsrv_um.so
>> vendor/imgtec/panda/proprietary/libIMGegl.so
>> vendor/imgtec/panda/proprietary/libEGL_POWERVR_SGX540_120.so
>> vendor/imgtec/panda/proprietary/libGLESv2_POWERVR_SGX540_120.so
>> vendor/imgtec/panda/proprietary/pvrsrvinit
>> vendor/imgtec/panda/proprietary/libGLESv1_CM_POWERVR_SGX540_120.so
>> vendor/imgtec/panda/proprietary/libusc.so
>> vendor/imgtec/panda/proprietary/libPVRScopeServices.so
>> vendor/imgtec/panda/proprietary/libpvr2d.so
>> vendor/imgtec/panda/proprietary/libglslcompiler.so
>> vendor/imgtec/panda/proprietary/libpvrANDROID_WSEGL.so
>> vendor/imgtec/panda/device-panda.mk
>> vendor/ti/
>> vendor/ti/panda/
>> vendor/ti/panda/BoardConfigVendor.mk
>> vendor/ti/panda/device-vendor.mk
>>
>> Files extracted successfully.
>> mount: you must specify the filesystem type
>> cp: cannot create regular file `/mnt/bin/pvrsrvinit': No such file or
>> directory
>> cp: cannot create regular file `/mnt/vendor/lib/hw/gralloc.omap4.so': No
>> such file or directory
>> umount2: Invalid argument
>> umount: /dev/sdb1: not mounted
>> /home/pandriod/Android
>> Success, installing binary files
>>
>>
>>
>> _______________________________________________
>> linaro-android mailing list
>> linaro-android@lists.linaro.org
>> http://lists.linaro.org/mailman/listinfo/linaro-android
>>
>
>
>
> --
> Zach Pfeffer
> Android Platform Team Lead, Linaro Platform Teams
> Linaro.org | Open source software for ARM SoCs
> Follow Linaro: http://www.facebook.com/pages/Linaro
> http://twitter.com/#!/linaroorg - http://www.linaro.org/linaro-blog
>
> _______________________________________________
> linaro-android mailing list
> linaro-android@lists.linaro.org
> http://lists.linaro.org/mailman/listinfo/linaro-android



--
Fathi Boudra
Linaro Release Manager | Validation Project Manager
Linaro.org | Open source software for ARM SoCs