Hi Paul,

Refer to the feedback below:

On Fri, May 25, 2012 at 10:30 PM, Paul Larson <paul.larson@linaro.org> wrote:
Adding Zach, linaro-release, and linaro-android.
Thanks for testing Botao.
Full results at https://docs.google.com/a/linaro.org/spreadsheet/ccc?key=0AkxwyUNxNaAadDRDVl9TSHUweUk3eG9ndk9sNGxUVnc&pli=1#gid=3 but it looks like these are the ones that would most likely affect the demo:

* https://bugs.launchpad.net/linaro-android/+bug/1004351 - No Google Hangout notification shows up on Origen Android image.
  - I'm assuming you just force the connect by opening the magic url though?
Magic URL? What did you mean?
 
* https://bugs.launchpad.net/linaro-android/+bug/1004362 - Video can't be played on Origen Android Google Hangout release.
  - This doesn't affect hangout video it seems though?
The Hangout video works, with an external USB camera, but after I ran some other tests, the standard sized USB port stopped working, the Mini USB port still works though.
 
* https://bugs.launchpad.net/linaro-android/+bug/1004411 - The USB works unstable on Origen Android Google Hangout image.

Additionally, there is a problem with getting input from the mic.  Botao, is there a bug for that? I don't see it here but I could be just missing it.  If there is no fix available for that, then it looks like the demo may have to be video only, and likely you'll want to set it up one time and not disconnect/reconnect.
For the microphone issue, I haven't reported bug yet because I'm not 100% sure. I hope someone can help me to double check it.

Thanks,
Paul Larson


On Fri, May 25, 2012 at 5:38 AM, Botao Sun <botao.sun@linaro.org> wrote:
Hi Paul,

Origen 12.05 Android Google Hangout release build test has been done, refer to this link to get the test result:


Because my microphone never work on Origen board, then I didn't test the speech recorder feature; I also didn't test the BT headset since I don't have it. Android build scripts & Connectivity Manager didn't get tested as usual.

Also, after first successfully working with Google Hangout, the standard sized USB port on my board stops to work, so I can't test the USB camera and USB host. However, the Mini USB port is still working, then I can use the ADB to install & test the Angry Bird.

Bluetooth works well on this build, I can successfully send and receive files.

For all the others, refer to that test result sheet to get more details.

Thank you.


BR
Botao Sun


On Fri, May 25, 2012 at 5:27 PM, Botao Sun <botao.sun@linaro.org> wrote:
Hi Paul,

On build:


Here is summary for Google Hangout test:

The hangout session can be established successfully between 2 Gmail accounts. On host side (my laptop), both video & audio work well; on target side (Origen board), video works well with my USB camera, but for audio, I can hear the sound comes from my laptop, but I can't speak out. I tried to connect my microphone to that J13 port (blue one), but whatever I did to microphone, I hear nothing on my laptop side. I tried both ports - J12 (green one) & J13, but doesn't work. The microphone works well on my laptop. My microphone never works with Origen board, so I think probably the fault is caused by itself. If anyone can test the microphone on Origen board on his / her side, that will be good.

Another thing is about the hangout invitation notice. After I sent invitation from laptop, there is no notice came out on Origen board. I need to go into the Google Plus app, then enter "Stream", then the catch the hangout session.

FYI.

Thanks.


BR
Botao Sun

On Thu, May 24, 2012 at 12:04 AM, Fathi Boudra <fathi.boudra@linaro.org> wrote:
Hi Botao,

the hangout build is a special releasd. Matt Waddel has updated
Android QA test cases:
https://wiki.linaro.org/Platform/QA/TestCases/Android#Google_Hangouts

Feel free to contact him directly for any question related to this build.

On 23 May 2012 15:01, Botao Sun <botao.sun@linaro.org> wrote:
> Hi Fathi,
>
> Here is some additional information about the Samsung Origen hangout build:
>
> After enter the guild selection screen, if choose the first one -
> "com.android.provision.DefaultActivity", the board then can enter the main
> screen and everything works well. However, if choosing the second one "Setup
> Wizard", then the problem I mentioned in previous email will come out.
>
> Another issue is once the board entered suspend mode, it can't be waked up
> except power off & power on.
>
> Also, these 3 commands must be run before you plug the SD card to board.
> Once a SD card booted up before, then an error about "mnt/app" already
> exists will be occurred.
>
> wget http://people.linaro.org/~vishalbhoj/install-hangout.sh
> chmod a+x install-hangout.sh
> ./install-hangout.sh
>
> FYI.
>
> Thanks.
>
>
> BR
> Botao Sun
>
>
> On Wed, May 23, 2012 at 9:43 PM, Botao Sun <botao.sun@linaro.org> wrote:
>>
>> Hi Fathi,
>>
>> For Samsung Origen builds:
>>
>> 1.
>> https://android-build.linaro.org/builds/~linaro-android/origen-ics-gcc47-samsunglt-stable-blob/#build=34:
>> Boot works well.
>>
>> 2.
>> https://android-build.linaro.org/builds/~linaro-android/origen-hangout-demo/#build=6:
>> Serial console works well, but after walk through the guide, the LCD turned
>> to black and finally entered to the suspend mode, can't wake it up. I tried
>> twice, and same problem occurred. You can find the serial log in attachment.
>>
>> Also, for the hangout build, it can't install the vendor package,
>> otherwise there would be no any display after press power button.
>>
>> Thanks.
>>
>>
>> BR
>> Botao Sun
>>
>> On Wed, May 23, 2012 at 8:14 PM, Abhishek Paliwal
>> <abhishek.paliwal@linaro.org> wrote:
>>>
>>>
>>>
>>> On 23 May 2012 12:10, Fathi Boudra <fathi.boudra@linaro.org> wrote:
>>>>
>>>> http://review.android.git.linaro.org/#change,2165
>>>>
>>>>
>>>> https://android-build.linaro.org/builds/~linaro-android/origen-hangout-demo/#build=6
>>>>
>>>> https://android-build.linaro.org/builds/~linaro-android/origen-ics-gcc47-samsunglt-stable-blob/#build=34
>>>
>>>
>>>
>>>>
>>>>
>>>> https://android-build.linaro.org/builds/~linaro-android/snowball-ics-gcc46-igloo-stable-blob/#build=301
>>>
>>> Boots up fine , Booted from eMMC using new linaro-uboot , emmc image
>>> created using lamc from mathieu's branch -
>>> $ bzr branch lp:~mathieu.poirier/linaro-image-tools/linaro-image-tools
>>>
>>>
>>>>
>>>>
>>>> https://android-build.linaro.org/builds/~linaro-android/vexpress-ics-gcc47-armlt-tracking-open/#build=34
>>>
>>> Boots up fine
>>>
>>>>
>>>> https://android-build.linaro.org/builds/~linaro-android/vexpress-rtsm-ics-gcc47-armlt-stable-open/#build=51
>>>
>>> Boots up fine
>>>>
>>>>
>>>>
>>>> At the moment, only PandBoard build is missing.
>>>
>>>
>>
>



--
Fathi Boudra
Linaro Release Manager | Validation Project Manager
Linaro.org | Open source software for ARM SoCs