In response to your questions:
 
The .img file came from Origen/Insignal website. I also tried with the image you mention but got exactly the same results.
 
The LCD never comes up - no backlight, no display. The SD power LED (LED4) comes on while I see the boot text in terminal then the boot text stops and LED4 goes out.
I tried the Ubuntu image as well - similar results, I see output on terminal which stops and LED4 goes off. Again, absolutely no display on the LCD and no ability to log in on the terminal.
 
Thanks for your interest.
 
Andy

From: Amit Pundir [mailto:amit.pundir@linaro.org]
Sent: Mon 19/03/2012 06:16
To: Andrew Fraser
Cc: linaro-android@lists.linaro.org
Subject: Re: HELP - Cannot boot Origen Board

Hi Andrew,

On 17 March 2012 01:23, Andrew Fraser <afraser@andyfraser.co.uk> wrote:

I have just purchased an Origen Board - Full Package. I flashed the SD card with igen-ics-gcc46-samsunglt-stable-blob.img

We do not ship images in .img format. Did you try the images from https://android-build.linaro.org/builds/~linaro-android/origen-ics-gcc46-samsunglt-stable-blob-12.02-release/ ?
 

and placed it into the SD card slot. I flicked the power switch and pressed SWITCH then POWER and saw the board booting in terminal. However, after a short period of time LED4 turns off and I do not see the LCD light or show the Android screen.

Do you mean LCD and Android UI doesn't come up at all or they turned off after some time?
 

The output in terminal is given below. Is my board faulty or have I not flashed the correct image to the SD card ?

If this output is all you have got then there is definitely something wrong somewhere. Did you try booting Linaro's Ubuntu images on Origen?

Regards,
Amit Pundir

U-Boot 2011.06-01275-gd6186aa (Feb 17 2012 - 08:54:12) for ORIGEN

CPU: S5PC210@1000MHz

Board: ORIGEN
DRAM: 1 GiB
WARNING: Caches not enabled
MMC: SAMSUNG SD/MMC: 0
*** Warning - bad CRC, using default environment

In: serial
Out: serial
Err: serial
Hit any key to stop autoboot: 0
reading boot.scr

397 bytes read
Running bootscript from mmc0:2 ...
## Executing script at 42000000
reading uImage

4049424 bytes read
reading uInitrd

166156 bytes read
## Booting kernel from Legacy Image at 40007000 ...
Image Name: Linux-3.0.4+
Image Type: ARM Linux Kernel Image (uncompressed)
Data Size: 4049360 Bytes = 3.9 MiB
Load Address: 40008000
Entry Point: 40008000
Verifying Checksum ... OK
## Loading init Ramdisk from Legacy Image at 42000000 ...
Image Name: Android Ramdisk Image
Image Type: ARM Linux RAMDisk Image (gzip compressed)
Data Size: 166092 Bytes = 162.2 KiB
Load Address: 00000000
Entry Point: 00000000
Verifying Checksum ... OK
Loading Kernel Image ... OK
OK

Starting kernel ...

Uncompressing Linux... done, booting the kernel.
<5>Linux version 3.0.4+ (jenkins-build@ip-10-140-6-146) (gcc version 4.6.3 20120201 (prerelease) (Linaro GCC 4.6-2012.02) ) #1 SMP PREEMPT Fri Feb 17 09:34:26 UTC 2012
CPU: ARMv7 Processor [412fc091] revision 1 (ARMv7), cr=10c5387f
CPU: VIPT nonaliasing data cache, VIPT aliasing instruction cache
Machine: ORIGEN
<4>Ignoring unrecognised tag 0x00000000
<4>Ignoring unrecognised tag 0x00000000
<4>Ignoring unrecognised tag 0x00000000
<4>Ignoring unrecognised tag 0x00000000
<5>Truncating RAM at 60000000-7fffffff to -6dffffff (vmalloc region overlap).
<3>CMA reserve : jpeg, addr is 0x5e800000, size is 0x1800000
<3>CMA reserve : fimc0, addr is 0x5e300000, size is 0x500000
<3>CMA reserve : fimc1, addr is 0x5de00000, size is 0x500000
<3>CMA reserve : fimc2, addr is 0x5d900000, size is 0x500000
<3>CMA reserve : fimc3, addr is 0x5d400000, size is 0x500000
<3>CMA reserve : fimd, addr is 0x5bc00000, size is 0x1800000
<3>CMA reserve : common, addr is 0x57c00000, size is 0x4000000
<3>CMA reserve : (null), addr is 0x57c00000, size is 0x0
Memory policy: ECC disabled, Data cache writealloc
CPU EXYNOS4210 (id 0x43210011)
<7>exynos4_init_clocks: initializing clocks
<6>S3C24XX Clocks, Copyright 2004 Simtec Electronics
<3>s3c_register_clksrc: clock armclk has no registers set
<3>mout_audss: bad source 0
<7>exynos4_setup_clocks: registering clocks
<7>exynos4_setup_clocks: xtal is 24000000
<6>EXYNOS4: PLL settings, A=1000000000, M=800000000, E=96000000 V=108000000<6>EXYNOS4: ARMCLK=1000000000, DMC=400000000, ACLK200=200000000
ACLK100=100000000, ACLK160=160000000, ACLK133=133333333
<6>uclk1: source is mout_mpll (6), rate is 100000000
<6>uclk1: source is mout_mpll (6), rate is 100000000
<6>uclk1: source is mout_mpll (6), rate is 100000000
<6>uclk1: source is mout_mpll (6), rate is 100000000
<6>sclk_pwm: source is ext_xtal (0), rate is 24000000
<6>sclk_csis: source is xusbxti (1), rate is 0
<6>sclk_csis: source is xusbxti (1), rate is 0
<6>sclk_cam0: source is xusbxti (1), rate is 0
<6>sclk_cam1: source is xusbxti (1), rate is 0
<6>sclk_fimc: source is xusbxti (1), rate is 0
<6>sclk_fimc: source is xusbxti (1), rate is 0
<6>sclk_fimc: source is xusbxti (1), rate is 0
<6>sclk_fimc: source is xusbxti (1), rate is 0
<6>sclk_mixer: source is sclk_dac (0), rate is 24000000
<6>sclk_fimd0: source is xusbxti (1), rate is 0
<6>sclk_fimd1: source is xusbxti (1), rate is 0
<6>sclk_sata: source is mout_mpll (0), rate is 133333333
<6>sclk_spi: source is xusbxti (1), rate is 0
<6>sclk_spi: source is mout_mpll (6), rate is 80000000
<6>sclk_spi: source is xusbxti (1), rate is 0
<6>sclk_fimg2d: source is mout_g2d0 (0), rate is 100000000
<7>On node 0 totalpages: 188416
<7> Normal zone: 1472 pages used for memmap
<7> Normal zone: 0 pages reserved
<7> Normal zone: 186944 pages, LIFO batch:31
<6>PERCPU: Embedded 7 pages/cpu @c0f96000 s6528 r8192 d13952 u32768
<7>pcpu-alloc: s6528 r8192 d13952 u32768 alloc=8*4096
<7>pcpu-alloc: [0] 0 [0] 1
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 186944
<5>Kernel command line: console=tty0 console=ttySAC2,115200n8 rootwait ro init=/init androidboot.console=ttySAC2 console=ttySAC2 root=/dev/mmcblk0p2

<6>PID hash table entries: 4096 (order: 2, 16384 bytes)
<6>Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
<6>Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
<6>Memory: 736MB = 736MB total
<5>Memory: 601736k/601736k available, 151928k reserved, 0K highmem
<5>Virtual kernel memory layout:
vector : 0xffff0000 - 0xffff1000 ( 4 kB)
fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
DMA : 0xfe800000 - 0xffe00000 ( 22 MB)
vmalloc : 0xee800000 - 0xf6000000 ( 120 MB)
lowmem : 0xc0000000 - 0xee000000 ( 736 MB)
modules : 0xbf000000 - 0xc0000000 ( 16 MB)
.text : 0xc0008000 - 0xc078fd14 (7712 kB)
.init : 0xc0790000 - 0xc07d5980 ( 279 kB)
.data : 0xc07d6000 - 0xc0835930 ( 383 kB)
.bss : 0xc0835954 - 0xc098bca8 (1369 kB)
<6>Preemptible hierarchical RCU implementation.
<6>NR_IRQS:624
<6>sched_clock: 32 bits at 50MHz, resolution 20ns, wraps every 85899ms
<6>Console: colour dummy device 80x30
<6>console [tty0] enabled
Linux version 3.0.4+ (jenkins-build@ip-10-140-6-146) (gcc version 4.6.3 20120201 (prerelease) (Linaro GCC 4.6-2012.02) ) #1 SMP PREEMPT Fri Feb 17 09:34:26 UTC 2012
CPU: ARMv7 Processor [412fc091] revision 1 (ARMv7), cr=10c5387f
CPU: VIPT nonaliasing data cache, VIPT aliasing instruction cache
Machine: ORIGEN
Ignoring unrecognised tag 0x00000000
Ignoring unrecognised tag 0x00000000
Ignoring unrecognised tag 0x00000000
Ignoring unrecognised tag 0x00000000
Truncating RAM at 60000000-7fffffff to -6dffffff (vmalloc region overlap).
CMA reserve : jpeg, addr is 0x5e800000, size is 0x1800000
CMA reserve : fimc0, addr is 0x5e300000, size is 0x500000
CMA reserve : fimc1, addr is 0x5de00000, size is 0x500000
CMA reserve : fimc2, addr is 0x5d900000, size is 0x500000
CMA reserve : fimc3, addr is 0x5d400000, size is 0x500000
CMA reserve : fimd, addr is 0x5bc00000, size is 0x1800000
CMA reserve : common, addr is 0x57c00000, size is 0x4000000
CMA reserve : (null), addr is 0x57c00000, size is 0x0
Memory policy: ECC disabled, Data cache writealloc
CPU EXYNOS4210 (id 0x43210011)
S3C24XX Clocks, Copyright 2004 Simtec Electronics
s3c_register_clksrc: clock armclk has no registers set
mout_audss: bad source 0
EXYNOS4: PLL settings, A=1000000000, M=800000000, E=96000000 V=108000000
EXYNOS4: ARMCLK=1000000000, DMC=400000000, ACLK200=200000000
ACLK100=100000000, ACLK160=160000000, ACLK133=133333333
uclk1: source is mout_mpll (6), rate is 100000000
uclk1: source is mout_mpll (6), rate is 100000000
uclk1: source is mout_mpll (6), rate is 100000000
uclk1: source is mout_mpll (6), rate is 100000000
sclk_pwm: source is ext_xtal (0), rate is 24000000
sclk_csis: source is xusbxti (1), rate is 0
sclk_csis: source is xusbxti (1), rate is 0
sclk_cam0: source is xusbxti (1), rate is 0
sclk_cam1: source is xusbxti (1), rate is 0
sclk_fimc: source is xusbxti (1), rate is 0
sclk_fimc: source is xusbxti (1), rate is 0
sclk_fimc: source is xusbxti (1), rate is 0
sclk_fimc: source is xusbxti (1), rate is 0
sclk_mixer: source is sclk_dac (0), rate is 24000000
sclk_fimd0: source is xusbxti (1), rate is 0
sclk_fimd1: source is xusbxti (1), rate is 0
sclk_sata: source is mout_mpll (0), rate is 133333333
sclk_spi: source is xusbxti (1), rate is 0
sclk_spi: source is mout_mpll (6), rate is 80000000
sclk_spi: source is xusbxti (1), rate is 0
sclk_fimg2d: source is mout_g2d0 (0), rate is 100000000
PERCPU: Embedded 7 pages/cpu @c0f96000 s6528 r8192 d13952 u32768
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 186944
Kernel command line: console=tty0 console=ttySAC2,115200n8 rootwait ro init=/init androidboot.console=ttySAC2 console=ttySAC2 root=/dev/mmcblk0p2

PID hash table entries: 4096 (order: 2, 16384 bytes)
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 736MB = 736MB total
Memory: 601736k/601736k available, 151928k reserved, 0K highmem
Virtual kernel memory layout:
vector : 0xffff0000 - 0xffff1000 ( 4 kB)
fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
DMA : 0xfe800000 - 0xffe00000 ( 22 MB)
vmalloc : 0xee800000 - 0xf6000000 ( 120 MB)
lowmem : 0xc0000000 - 0xee000000 ( 736 MB)
modules : 0xbf000000 - 0xc0000000 ( 16 MB)
.text : 0xc0008000 - 0xc078fd14 (7712 kB)
.init : 0xc0790000 - 0xc07d5980 ( 279 kB)
.data : 0xc07d6000 - 0xc0835930 ( 383 kB)
.bss : 0xc0835954 - 0xc098bca8 (1369 kB)
Preemptible hierarchical RCU implementation.
NR_IRQS:624
sched_clock: 32 bits at 50MHz, resolution 20ns, wraps every 85899ms
Console: colour dummy device 80x30
console <tty0] enabled
6>console [ttySAC2] enabled
console [tt<SAC2] enabled
6>Calibrating delay loop... Calibrating delay loop... <c>1992.29 BogoMIPS (lpj=4980736)
1992.29 BogoMIPS<(lpj=4980736)
6>pid_max: default: 32768 minimum: 301
pid_max: default: 32768 minimum: 301
<6>Mount-cache hash table entries: 512
Mount-cache hash table entries: 512
<6>CPU: Testing write buffer coherency: CPU: Testing write buffer coherency: ok
ok
<6>ftrace: allocating 19856 entries in 59 pages
ftrace: allocating 19856 entries in 59 pages
<6>CPU0: thread -1, cpu 0, socket 9, mpidr 80000900
CPU0: thread -1, cpu 0, socket 9, <pidr 80000900
6>Calibrating local timer... Calibrating local timer... 249.93MHz.
249.93MHz.
<6>hw perfevents: enabled with ARMv7 Cortex-A9 PMU driver, 7 counters available
hw perfevents: enabled with ARMv7 Cortex-A9 PMU driver, 7 counters available
<6>L310 cache controller enabled
L310 cache cont<oller enabled
6>l2x0: 16 ways, CACHE_ID 0x4100c4c5, AUX_CTRL 0x7e470001, Cache size: 1048576 B
l2x0: 16 ways, CACHE_ID 0x4100c4c5, AUX_CTRL 0x7e470001, Cache size: 1048576 B
CPU1: Booted secondary processor
<2>CPU1: Unknown IPI message 0x1


_______________________________________________
linaro-android mailing list
linaro-android@lists.linaro.org
http://lists.linaro.org/mailman/listinfo/linaro-android