Okay, so I have tried both 12.02 for Android and 12.02 for Ubuntu Desktop both for the Origen board.

I got the Android image from here: http://releases.linaro.org/12.02/android/leb-origen/origen-ics-gcc46-samsunglt-stable-blob.img.gz and the Ubuntu from here: http://releases.linaro.org/12.02/oneiric/ubuntu-desktop/origen-ubuntu-desktop.img.gz.

 

My commands to make the Ubuntu image were:

 

SDCARD=/dev/sdb

IMGFILE=origen-ubuntu-desktop.image

gunzip ${IMGFILE}.gz

dd bs=64k if=${IMGFILE} of=${SDCARD}

 

I then powered up the Origen board and again, got no output on the LCD and only a small amount of boot information in terminal before the SD card power LED (LED4) went off.

 

U-Boot 2011.12 (Feb 16 2012 - 21:52:47) for ORIGEN

 

CPU:    S5PC210@1000MHz

 

Board: ORIGEN

DRAM:  1 GiB

WARNING: Caches not enabled

MMC:   SAMSUNG SD/MMC: 0

In:    serial

Out:   serial

Err:   serial

Hit any key to stop autoboot:  0

reading uImage

 

4082320 bytes read

reading uInitrd

 

2175126 bytes read

## Booting kernel from Legacy Image at 40007000 ...

   Image Name:   Linux

   Image Type:   ARM Linux Kernel Image (uncompressed)

   Data Size:    4082256 Bytes = 3.9 MiB

   Load Address: 40008000

   Entry Point:  40008000

   Verifying Checksum ... OK

## Loading init Ramdisk from Legacy Image at 42000000 ...

   Image Name:   initramfs

   Image Type:   ARM Linux RAMDisk Image (uncompressed)

   Data Size:    2175062 Bytes = 2.1 MiB

   Load Address: 00000000

   Entry Point:  00000000

   Verifying Checksum ... OK

   Loading Kernel Image ... OK

OK

 

Starting kernel ...

 

Uncompressing Linux... done, booting the kernel.

 

 

For the Android image, I used the following commands:

 

SDCARD=/dev/sdb

IMGFILE=origen-ics-gcc46-samsunglt-stable-blob.img

gunzip ${IMGFILE}.gz

dd bs=64k if=${IMGFILE} of=${SDCARD}

 

Exactly the same thing happened as I previously mentioned, got a bunch of boot text then LED4 goes off and nothing else happens.

 

Any advice would be gratefully accepted.

 

Andy

 

 

 

Hi, could you paste your command to flash SD card here?

I have just purchased an Origen Board - Full Package. I flashed the SD card with igen-ics-gcc46-samsunglt-stable-blob.img and placed it into the SD card slot. I flicked the power switch and pressed SWITCH then POWER and saw the board booting in terminal. However, after a short period of time LED4 turns off and I do not see the LCD light or show the Android screen. The output in terminal is given below. Is my board faulty or have I not flashed the correct image to the SD card ?

U-Boot 2011.06-01275-gd6186aa (Feb 17 2012 - 08:54:12) for ORIGEN

CPU: S5PC210@1000MHz

Board: ORIGEN
DRAM: 1 GiB
WARNING: Caches not enabled
MMC: SAMSUNG SD/MMC: 0
*** Warning - bad CRC, using default environment

In: serial
Out: serial
Err: serial
Hit any key to stop autoboot: 0
reading boot.scr

397 bytes read
Running bootscript from mmc0:2 ...
## Executing script at 42000000
reading uImage

4049424 bytes read
reading uInitrd

166156 bytes read
## Booting kernel from Legacy Image at 40007000 ...
Image Name: Linux-3.0.4+
Image Type: ARM Linux Kernel Image (uncompressed)
Data Size: 4049360 Bytes = 3.9 MiB
Load Address: 40008000
Entry Point: 40008000
Verifying Checksum ... OK
## Loading init Ramdisk from Legacy Image at 42000000 ...
Image Name: Android Ramdisk Image
Image Type: ARM Linux RAMDisk Image (gzip compressed)
Data Size: 166092 Bytes = 162.2 KiB
Load Address: 00000000
Entry Point: 00000000
Verifying Checksum ... OK
Loading Kernel Image ... OK
OK

Starting kernel ...

Uncompressing Linux... done, booting the kernel.
<5>Linux version 3.0.4+ (jenkins-build@ip-10-140-6-146) (gcc version 4.6.3 20120201 (prerelease) (Linaro GCC 4.6-2012.02) ) #1 SMP PREEMPT Fri Feb 17 09:34:26 UTC 2012
CPU: ARMv7 Processor [412fc091] revision 1 (ARMv7), cr=10c5387f
CPU: VIPT nonaliasing data cache, VIPT aliasing instruction cache
Machine: ORIGEN
<4>Ignoring unrecognised tag 0x00000000
<4>Ignoring unrecognised tag 0x00000000
<4>Ignoring unrecognised tag 0x00000000
<4>Ignoring unrecognised tag 0x00000000
<5>Truncating RAM at 60000000-7fffffff to -6dffffff (vmalloc region overlap).
<3>CMA reserve : jpeg, addr is 0x5e800000, size is 0x1800000
<3>CMA reserve : fimc0, addr is 0x5e300000, size is 0x500000
<3>CMA reserve : fimc1, addr is 0x5de00000, size is 0x500000
<3>CMA reserve : fimc2, addr is 0x5d900000, size is 0x500000
<3>CMA reserve : fimc3, addr is 0x5d400000, size is 0x500000
<3>CMA reserve : fimd, addr is 0x5bc00000, size is 0x1800000
<3>CMA reserve : common, addr is 0x57c00000, size is 0x4000000
<3>CMA reserve : (null), addr is 0x57c00000, size is 0x0
Memory policy: ECC disabled, Data cache writealloc
CPU EXYNOS4210 (id 0x43210011)
<7>exynos4_init_clocks: initializing clocks
<6>S3C24XX Clocks, Copyright 2004 Simtec Electronics
<3>s3c_register_clksrc: clock armclk has no registers set
<3>mout_audss: bad source 0
<7>exynos4_setup_clocks: registering clocks
<7>exynos4_setup_clocks: xtal is 24000000
<6>EXYNOS4: PLL settings, A=1000000000, M=800000000, E=96000000 V=108000000<6>EXYNOS4: ARMCLK=1000000000, DMC=400000000, ACLK200=200000000
ACLK100=100000000, ACLK160=160000000, ACLK133=133333333
<6>uclk1: source is mout_mpll (6), rate is 100000000
<6>uclk1: source is mout_mpll (6), rate is 100000000
<6>uclk1: source is mout_mpll (6), rate is 100000000
<6>uclk1: source is mout_mpll (6), rate is 100000000
<6>sclk_pwm: source is ext_xtal (0), rate is 24000000
<6>sclk_csis: source is xusbxti (1), rate is 0
<6>sclk_csis: source is xusbxti (1), rate is 0
<6>sclk_cam0: source is xusbxti (1), rate is 0
<6>sclk_cam1: source is xusbxti (1), rate is 0
<6>sclk_fimc: source is xusbxti (1), rate is 0
<6>sclk_fimc: source is xusbxti (1), rate is 0
<6>sclk_fimc: source is xusbxti (1), rate is 0
<6>sclk_fimc: source is xusbxti (1), rate is 0
<6>sclk_mixer: source is sclk_dac (0), rate is 24000000
<6>sclk_fimd0: source is xusbxti (1), rate is 0
<6>sclk_fimd1: source is xusbxti (1), rate is 0
<6>sclk_sata: source is mout_mpll (0), rate is 133333333
<6>sclk_spi: source is xusbxti (1), rate is 0
<6>sclk_spi: source is mout_mpll (6), rate is 80000000
<6>sclk_spi: source is xusbxti (1), rate is 0
<6>sclk_fimg2d: source is mout_g2d0 (0), rate is 100000000
<7>On node 0 totalpages: 188416
<7> Normal zone: 1472 pages used for memmap
<7> Normal zone: 0 pages reserved
<7> Normal zone: 186944 pages, LIFO batch:31
<6>PERCPU: Embedded 7 pages/cpu @c0f96000 s6528 r8192 d13952 u32768
<7>pcpu-alloc: s6528 r8192 d13952 u32768 alloc=8*4096
<7>pcpu-alloc: [0] 0 [0] 1
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 186944
<5>Kernel command line: console=tty0 console=ttySAC2,115200n8 rootwait ro init=/init androidboot.console=ttySAC2 console=ttySAC2 root=/dev/mmcblk0p2

<6>PID hash table entries: 4096 (order: 2, 16384 bytes)
<6>Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
<6>Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
<6>Memory: 736MB = 736MB total
<5>Memory: 601736k/601736k available, 151928k reserved, 0K highmem
<5>Virtual kernel memory layout:
vector : 0xffff0000 - 0xffff1000 ( 4 kB)
fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
DMA : 0xfe800000 - 0xffe00000 ( 22 MB)
vmalloc : 0xee800000 - 0xf6000000 ( 120 MB)
lowmem : 0xc0000000 - 0xee000000 ( 736 MB)
modules : 0xbf000000 - 0xc0000000 ( 16 MB)
.text : 0xc0008000 - 0xc078fd14 (7712 kB)
.init : 0xc0790000 - 0xc07d5980 ( 279 kB)
.data : 0xc07d6000 - 0xc0835930 ( 383 kB)
.bss : 0xc0835954 - 0xc098bca8 (1369 kB)
<6>Preemptible hierarchical RCU implementation.
<6>NR_IRQS:624
<6>sched_clock: 32 bits at 50MHz, resolution 20ns, wraps every 85899ms
<6>Console: colour dummy device 80x30
<6>console [tty0] enabled
Linux version 3.0.4+ (jenkins-build@ip-10-140-6-146) (gcc version 4.6.3 20120201 (prerelease) (Linaro GCC 4.6-2012.02) ) #1 SMP PREEMPT Fri Feb 17 09:34:26 UTC 2012
CPU: ARMv7 Processor [412fc091] revision 1 (ARMv7), cr=10c5387f
CPU: VIPT nonaliasing data cache, VIPT aliasing instruction cache
Machine: ORIGEN
Ignoring unrecognised tag 0x00000000
Ignoring unrecognised tag 0x00000000
Ignoring unrecognised tag 0x00000000
Ignoring unrecognised tag 0x00000000
Truncating RAM at 60000000-7fffffff to -6dffffff (vmalloc region overlap).
CMA reserve : jpeg, addr is 0x5e800000, size is 0x1800000
CMA reserve : fimc0, addr is 0x5e300000, size is 0x500000
CMA reserve : fimc1, addr is 0x5de00000, size is 0x500000
CMA reserve : fimc2, addr is 0x5d900000, size is 0x500000
CMA reserve : fimc3, addr is 0x5d400000, size is 0x500000
CMA reserve : fimd, addr is 0x5bc00000, size is 0x1800000
CMA reserve : common, addr is 0x57c00000, size is 0x4000000
CMA reserve : (null), addr is 0x57c00000, size is 0x0
Memory policy: ECC disabled, Data cache writealloc
CPU EXYNOS4210 (id 0x43210011)
S3C24XX Clocks, Copyright 2004 Simtec Electronics
s3c_register_clksrc: clock armclk has no registers set
mout_audss: bad source 0
EXYNOS4: PLL settings, A=1000000000, M=800000000, E=96000000 V=108000000
EXYNOS4: ARMCLK=1000000000, DMC=400000000, ACLK200=200000000
ACLK100=100000000, ACLK160=160000000, ACLK133=133333333
uclk1: source is mout_mpll (6), rate is 100000000
uclk1: source is mout_mpll (6), rate is 100000000
uclk1: source is mout_mpll (6), rate is 100000000
uclk1: source is mout_mpll (6), rate is 100000000
sclk_pwm: source is ext_xtal (0), rate is 24000000
sclk_csis: source is xusbxti (1), rate is 0
sclk_csis: source is xusbxti (1), rate is 0
sclk_cam0: source is xusbxti (1), rate is 0
sclk_cam1: source is xusbxti (1), rate is 0
sclk_fimc: source is xusbxti (1), rate is 0
sclk_fimc: source is xusbxti (1), rate is 0
sclk_fimc: source is xusbxti (1), rate is 0
sclk_fimc: source is xusbxti (1), rate is 0
sclk_mixer: source is sclk_dac (0), rate is 24000000
sclk_fimd0: source is xusbxti (1), rate is 0
sclk_fimd1: source is xusbxti (1), rate is 0
sclk_sata: source is mout_mpll (0), rate is 133333333
sclk_spi: source is xusbxti (1), rate is 0
sclk_spi: source is mout_mpll (6), rate is 80000000
sclk_spi: source is xusbxti (1), rate is 0
sclk_fimg2d: source is mout_g2d0 (0), rate is 100000000
PERCPU: Embedded 7 pages/cpu @c0f96000 s6528 r8192 d13952 u32768
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 186944
Kernel command line: console=tty0 console=ttySAC2,115200n8 rootwait ro init=/init androidboot.console=ttySAC2 console=ttySAC2 root=/dev/mmcblk0p2

PID hash table entries: 4096 (order: 2, 16384 bytes)
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 736MB = 736MB total
Memory: 601736k/601736k available, 151928k reserved, 0K highmem
Virtual kernel memory layout:
vector : 0xffff0000 - 0xffff1000 ( 4 kB)
fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
DMA : 0xfe800000 - 0xffe00000 ( 22 MB)
vmalloc : 0xee800000 - 0xf6000000 ( 120 MB)
lowmem : 0xc0000000 - 0xee000000 ( 736 MB)
modules : 0xbf000000 - 0xc0000000 ( 16 MB)
.text : 0xc0008000 - 0xc078fd14 (7712 kB)
.init : 0xc0790000 - 0xc07d5980 ( 279 kB)
.data : 0xc07d6000 - 0xc0835930 ( 383 kB)
.bss : 0xc0835954 - 0xc098bca8 (1369 kB)
Preemptible hierarchical RCU implementation.
NR_IRQS:624
sched_clock: 32 bits at 50MHz, resolution 20ns, wraps every 85899ms
Console: colour dummy device 80x30
console <tty0] enabled
6>console [ttySAC2] enabled
console [tt<SAC2] enabled
6>Calibrating delay loop... Calibrating delay loop... <c>1992.29 BogoMIPS (lpj=4980736)
1992.29 BogoMIPS<(lpj=4980736)
6>pid_max: default: 32768 minimum: 301
pid_max: default: 32768 minimum: 301
<6>Mount-cache hash table entries: 512
Mount-cache hash table entries: 512
<6>CPU: Testing write buffer coherency: CPU: Testing write buffer coherency: ok
ok
<6>ftrace: allocating 19856 entries in 59 pages
ftrace: allocating 19856 entries in 59 pages
<6>CPU0: thread -1, cpu 0, socket 9, mpidr 80000900
CPU0: thread -1, cpu 0, socket 9, <pidr 80000900
6>Calibrating local timer... Calibrating local timer... 249.93MHz.
249.93MHz.
<6>hw perfevents: enabled with ARMv7 Cortex-A9 PMU driver, 7 counters available
hw perfevents: enabled with ARMv7 Cortex-A9 PMU driver, 7 counters available
<6>L310 cache controller enabled
L310 cache cont<oller enabled
6>l2x0: 16 ways, CACHE_ID 0x4100c4c5, AUX_CTRL 0x7e470001, Cache size: 1048576 B
l2x0: 16 ways, CACHE_ID 0x4100c4c5, AUX_CTRL 0x7e470001, Cache size: 1048576 B
CPU1: Booted secondary processor
<2>CPU1: Unknown IPI message 0x1


_______________________________________________
linaro-android mailing list
linaro-android@lists.linaro.org
http://lists.linaro.org/mailman/listinfo/linaro-android