https://bugs.launchpad.net/linaro-android/+bug/1045244

On 4 September 2012 20:51, Zach Pfeffer <zach.pfeffer@linaro.org> wrote:

Fahad,

Would you file a bug on this issue for tracking and verify that the
tip build now works from,
https://android-build.linaro.org/builds/~linaro-android/origen-jb-gcc47-samsunglt-stable-blob/

?

On 4 September 2012 10:13, John Rigby <john.rigby@linaro.org> wrote:
> U-boot mmc for origen was broken in 2012.08.2 then fixed by applying a
> couple of reverts in 2012.08.3. The master branch was updated one
> week ago however the new tag was not applied until later in the week
> on Thursday.
>
> --john
>
> On Mon, Sep 3, 2012 at 3:16 PM, Alexander Sack
> <alexander.sack@linaro.org> wrote:
>> Can we try same image with the LAVA bootloader version to confirm that it's
>> a bootloader thing? Also CCed jcriby for bootloader support.
>>
>> Check with Dave in case we can't find the bootloader installed in LAVA case.
>>
>> On Sep 3, 2012 10:50 PM, "Zach Pfeffer" <zach.pfeffer@linaro.org> wrote:
>>>
>>> On 3 September 2012 05:41, Botao Sun <botao.sun@linaro.org> wrote:
>>> > + Zach
>>> >
>>> > Sorry, I mean another Amit, Mr. Amit Pundir, he's working on Samsung
>>> > related
>>> > stuff I remembered.
>>> >
>>> > Also, here is more information, I have tried several previous image, the
>>> > last good one is build 47:
>>> >
>>> >
>>> > https://android-build.linaro.org/builds/~linaro-android/origen-jb-gcc47-samsunglt-stable-blob/#build=47
>>> >
>>> > Therefore, I'm going to use this one as our weekly test target. However,
>>> > please dig more on why build 48, 49 & 50 failed - bad thing started at
>>> > build
>>> > 48.
>>> >
>>> > Thank you!
>>>
>>> Botao,
>>>
>>> Just had a second to look at this, I see:
>>>
>>> U-Boot 2012.07-00053-gbf30cf4 (Sep 03 2012 - 07:03:03) for ORIGEN
>>>
>>> CPU: Exynos4210@1000MHz
>>>
>>> Board: ORIGEN
>>> DRAM: 1 GiB
>>> WARNING: Caches not enabled
>>> MMC: SAMSUNG SDHCI: 0
>>> Timeout for status update!
>>> mmc fail to send stop cmd
>>> Using default environment
>>>
>>> In: serial
>>> Out: serial
>>> Err: serial
>>> Hit any key to stop autoboot: 0
>>> reading boot.scr
>>>
>>> 397 bytes read
>>> Running bootscript from mmc0:2 ...
>>> ## Executing script at 42000000
>>> reading uImage
>>> Timeout for status update!
>>> mmc fail to send stop cmd
>>> Timeout for status update!
>>> mmc fail to send stop cmd
>>> Timeout for status update!
>>> mmc fail to send stop cmd
>>> Timeout for status update!
>>> mmc fail to send stop cmd
>>> Timeout for status update!
>>> mmc fail to send stop cmd
>>> Timeout for status update!
>>> mmc fail to send stop cmd
>>> Timeout for status update!
>>> mmc fail to send stop cmd
>>> Timeout for status update!
>>> mmc fail to send stop cmd
>>> Timeout for status update!
>>> mmc fail to send stop cmd
>>> Timeout for status update!
>>> mmc fail to send stop cmd
>>> Timeout for status update!
>>> mmc fail to send stop cmd
>>> Transfer data timeout
>>> Error reading cluster
>>>
>>> ** Unable to read "uImage" from mmc 0:2 **
>>> ** Can't read partition table on 0:0 **
>>> ** Partition 2 not valid on device 0 **
>>>
>>> ** Unable to use mmc 0:2 for fatload **
>>> ## Booting kernel from Legacy Image at 40007000 ...
>>> Image Name: Linux-3.4.8
>>> Image Type: ARM Linux Kernel Image (uncompressed)
>>> Data Size: 3879160 Bytes = 3.7 MiB
>>> Load Address: 40008000
>>> Entry Point: 40008000
>>> Verifying Checksum ... Bad Data CRC
>>> ERROR: can't get kernel image!
>>> ORIGEN #
>>>
>>> on,
>>>
>>>
>>> https://android-build.linaro.org/builds/~linaro-android/origen-jb-gcc47-samsunglt-stable-blob/#build=50
>>>
>>> This would explain why it works in LAVA (since LAVA doesn't update the
>>> bootloader) but it doesn't work locally (since we do update the
>>> bootloader). Is this what you see?
>>>
>>> >
>>> >
>>> > BR
>>> > Botao Sun
>>> >
>>> > On Mon, Sep 3, 2012 at 8:25 PM, amit khare <amit.khare@linaro.org>
>>> > wrote:
>>> >>
>>> >> on it....
>>> >>
>>> >> Regards,
>>> >> Amit
>>> >>
>>> >>
>>> >> On 3 September 2012 15:21, Botao Sun <botao.sun@linaro.org> wrote:
>>> >>>
>>> >>> Hi Amit,
>>> >>>
>>> >>> Would you take a look at this issue?
>>> >>>
>>> >>> Origen Jelly Bean boot failed.:
>>> >>> https://bugs.launchpad.net/linaro-android/+bug/1045244
>>> >>>
>>> >>> The weird thing is LAVA shows that it works well:
>>> >>>
>>> >>> http://validation.linaro.org/lava-server/dashboard/image-reports/origen-jb-gcc47-samsunglt-stable-blob
>>> >>>
>>> >>> Is there anything I missed during SD card flashing?
>>> >>>
>>> >>> Thank you!
>>> >>>
>>> >>>
>>> >>> BR
>>> >>> Botao Sun
>>> >>
>>> >>
>>> >
>>>
>>>
>>>
>>> --
>>> Zach Pfeffer
>>> Android Platform Team Lead, Linaro Platform Teams
>>> Linaro.org | Open source software for ARM SoCs
>>> Follow Linaro: http://www.facebook.com/pages/Linaro
>>> http://twitter.com/#!/linaroorg - http://www.linaro.org/linaro-blog

--
Zach Pfeffer
Android Platform Team Lead, Linaro Platform Teams
Linaro.org | Open source software for ARM SoCs
Follow Linaro: http://www.facebook.com/pages/Linaro
http://twitter.com/#!/linaroorg - http://www.linaro.org/linaro-blog

_______________________________________________
linaro-android mailing list
linaro-android@lists.linaro.org
http://lists.linaro.org/mailman/listinfo/linaro-android