Hi,
I am having a few problems with getting android up and running on my pandaboard ES
After getting the final message - Done creating Linaro Android image on /dev/sdb
I remove the SD card and place it in my pandaboard but all I get is a blank screen.
I also seem to be having some issues with minicom working at this point. I get the message - minicom: cannot open /dev/ttyUSB0: No such file or directory
As android in flashed to my SD card this is what it says.
I see... Device Mount point Size /dev/sda none 305245MB /dev/sda1 none 10000MB /dev/sda2 none 247569MB /dev/sda3 none 47674MB /dev/sda5 / 43837MB /dev/sda6 none 3836MB /dev/sdb none 7580MB /dev/sdb1 /media/boot 131MB /dev/sdb2 /media/system 512MB /dev/sdb3 /media/cache 256MB /dev/sdb4 none 6680MB /dev/sdb5 /media/userdata 511MB /dev/sdb6 /media/sdcard 6167MB /dev/sr0 none 0MB Are you 100% sure, on selecting [/dev/sdb] (y/n)? y Checking that no-one is using this disk right now ... OK Warning: bad partition start (earliest 1843201) partition ends on cylinder 1023, beyond the end of the disk partition ends on cylinder 1023, beyond the end of the disk Warning: partition 1 does not end at a cylinder boundary end of partition 4 has impossible value for cylinders: 1023 (should be in 0-1020) If you created or changed a DOS partition, /dev/foo7, say, then use dd(1) to zero the first 512 bytes: dd if=/dev/zero of=/dev/foo7 bs=512 count=1 (See fdisk(8).)
Formating boot partition
mkfs.vfat 3.0.12 (29 Oct 2011) mke2fs 1.42 (29-Nov-2011) Filesystem label=userdata OS type: Linux Block size=1024 (log=0) Fragment size=1024 (log=0) Stride=0 blocks, Stripe width=0 blocks 131072 inodes, 524272 blocks 26213 blocks (5.00%) reserved for the super user First data block=1 Maximum filesystem blocks=67633152 64 block groups 8192 blocks per group, 8192 fragments per group 2048 inodes per group Superblock backups stored on blocks: 8193, 24577, 40961, 57345, 73729, 204801, 221185, 401409
Allocating group tables: done Writing inode tables: done Creating journal (8192 blocks): done Writing superblocks and filesystem accounting information: done
mke2fs 1.42 (29-Nov-2011) Filesystem label=cache OS type: Linux Block size=1024 (log=0) Fragment size=1024 (log=0) Stride=0 blocks, Stripe width=0 blocks 65536 inodes, 262144 blocks 13107 blocks (5.00%) reserved for the super user First data block=1 Maximum filesystem blocks=67371008 32 block groups 8192 blocks per group, 8192 fragments per group 2048 inodes per group Superblock backups stored on blocks: 8193, 24577, 40961, 57345, 73729, 204801, 221185
Allocating group tables: done Writing inode tables: done Creating journal (8192 blocks): done Writing superblocks and filesystem accounting information: done
mke2fs 1.42 (29-Nov-2011) Filesystem label=system OS type: Linux Block size=4096 (log=2) Fragment size=4096 (log=2) Stride=0 blocks, Stripe width=0 blocks 32768 inodes, 131072 blocks 6553 blocks (5.00%) reserved for the super user First data block=0 Maximum filesystem blocks=134217728 4 block groups 32768 blocks per group, 32768 fragments per group 8192 inodes per group Superblock backups stored on blocks: 32768, 98304
Allocating group tables: done Writing inode tables: done Creating journal (4096 blocks): done Writing superblocks and filesystem accounting information: done
mkfs.vfat 3.0.12 (29 Oct 2011) Image Name: boot script Created: Fri Jul 6 19:31:57 2012 Image Type: ARM Linux Script (uncompressed) Data Size: 385 Bytes = 0.38 kB = 0.00 MB Load Address: 00000000 Entry Point: 00000000 Contents: Image 0: 377 Bytes = 0.37 kB = 0.00 MB Done creating Linaro Android image on /dev/sdb
Is there any problems you can see there?
Thanks
Dale
Which build are you using? I've seen this as well. Have you tried reprogramming the card and trying again?
On 6 July 2012 04:39, Dale Wathen raz631@msn.com wrote:
Hi,
I am having a few problems with getting android up and running on my pandaboard ES
After getting the final message -
Done creating Linaro Android image on /dev/sdb
I remove the SD card and place it in my pandaboard but all I get is a blank screen.
I also seem to be having some issues with minicom working at this point. I get the message - minicom: cannot open /dev/ttyUSB0: No such file or directory
As android in flashed to my SD card this is what it says.
I see... Device Mount point Size /dev/sda none 305245MB /dev/sda1 none 10000MB /dev/sda2 none 247569MB /dev/sda3 none 47674MB /dev/sda5 / 43837MB /dev/sda6 none 3836MB /dev/sdb none 7580MB /dev/sdb1 /media/boot 131MB /dev/sdb2 /media/system 512MB /dev/sdb3 /media/cache 256MB /dev/sdb4 none 6680MB /dev/sdb5 /media/userdata 511MB /dev/sdb6 /media/sdcard 6167MB /dev/sr0 none 0MB Are you 100% sure, on selecting [/dev/sdb] (y/n)? y Checking that no-one is using this disk right now ... OK Warning: bad partition start (earliest 1843201) partition ends on cylinder 1023, beyond the end of the disk partition ends on cylinder 1023, beyond the end of the disk Warning: partition 1 does not end at a cylinder boundary end of partition 4 has impossible value for cylinders: 1023 (should be in 0-1020) If you created or changed a DOS partition, /dev/foo7, say, then use dd(1) to zero the first 512 bytes: dd if=/dev/zero of=/dev/foo7 bs=512 count=1 (See fdisk(8).)
Formating boot partition
mkfs.vfat 3.0.12 (29 Oct 2011) mke2fs 1.42 (29-Nov-2011) Filesystem label=userdata OS type: Linux Block size=1024 (log=0) Fragment size=1024 (log=0) Stride=0 blocks, Stripe width=0 blocks 131072 inodes, 524272 blocks 26213 blocks (5.00%) reserved for the super user First data block=1 Maximum filesystem blocks=67633152 64 block groups 8192 blocks per group, 8192 fragments per group 2048 inodes per group Superblock backups stored on blocks: 8193, 24577, 40961, 57345, 73729, 204801, 221185, 401409
Allocating group tables: done Writing inode tables: done Creating journal (8192 blocks): done Writing superblocks and filesystem accounting information: done
mke2fs 1.42 (29-Nov-2011) Filesystem label=cache OS type: Linux Block size=1024 (log=0) Fragment size=1024 (log=0) Stride=0 blocks, Stripe width=0 blocks 65536 inodes, 262144 blocks 13107 blocks (5.00%) reserved for the super user First data block=1 Maximum filesystem blocks=67371008 32 block groups 8192 blocks per group, 8192 fragments per group 2048 inodes per group Superblock backups stored on blocks: 8193, 24577, 40961, 57345, 73729, 204801, 221185
Allocating group tables: done Writing inode tables: done Creating journal (8192 blocks): done Writing superblocks and filesystem accounting information: done
mke2fs 1.42 (29-Nov-2011) Filesystem label=system OS type: Linux Block size=4096 (log=2) Fragment size=4096 (log=2) Stride=0 blocks, Stripe width=0 blocks 32768 inodes, 131072 blocks 6553 blocks (5.00%) reserved for the super user First data block=0 Maximum filesystem blocks=134217728 4 block groups 32768 blocks per group, 32768 fragments per group 8192 inodes per group Superblock backups stored on blocks: 32768, 98304
Allocating group tables: done Writing inode tables: done Creating journal (4096 blocks): done Writing superblocks and filesystem accounting information: done
mkfs.vfat 3.0.12 (29 Oct 2011) Image Name: boot script Created: Fri Jul 6 19:31:57 2012 Image Type: ARM Linux Script (uncompressed) Data Size: 385 Bytes = 0.38 kB = 0.00 MB Load Address: 00000000 Entry Point: 00000000 Contents: Image 0: 377 Bytes = 0.37 kB = 0.00 MB Done creating Linaro Android image on /dev/sdb
Is there any problems you can see there?
Thanks
Dale
linaro-android mailing list linaro-android@lists.linaro.org http://lists.linaro.org/mailman/listinfo/linaro-android
linaro-android@lists.linaro.org