Dear Vishal,
From the Linaro mailing list, I think you are the expert for Pandaboard ES platform issues.
So your help for this problem would be very much appreciated:
I am just getting started with Android prebuilt images on Pandaboard ES platform, but I don’t have success with any prebuilt image available on your download section. As I’m not a Linux expert, prebuilt images are written on SD-Card with Win32 Disk Imager.
- Several prebuild images tested, but Android does not work with any of them. - 2 diferent boards tested, but unfortunately the result is the same (even hadware validation is ok for both boards).
It has been observed the top of OMAP4460 device is getting very hot, so the board has been powered off in order to avoid any hardware damage. Several error messages on the terminal, unable to analyze all of them one by one.
Please could you help me ?
Thanks, Josep
P.D. For example, there are some of the error messages:
[ 2751.705169] acc_open [ 2751.707946] acc_release [ 2752.743469] omap_alert_zone:hot spot temp 101092 [ 2752.768890] binder: release 31777:31777 transaction 483178 in, still active [ 2752.776489] binder: send failed reply for transaction 483178 to 31918:31918 [ 2752.784301] binder: release 31777:31789 transaction 483160 in, still active [ 2752.791687] binder: send failed reply for transaction 483160 to 31891:31957 [ 2752.799468] binder: release 31777:31949 transaction 483141 in, still active [ 2752.806884] binder: send failed reply for transaction 483141 to 31891:31891 [ 2752.814392] binder: release 31777:31950 transaction 483176 in, still active [ 2752.821899] binder: send failed reply for transaction 483176 to 31879:31879 [ 2752.829681] binder: send failed reply for transaction 483179 to 31911:31911 [ 2752.837188] binder: send failed reply for transaction 483186 to 31958:31958 [ 2752.844848] binder: 31851:31851 transaction failed 29189, size 156-0 [ 2752.853607] binder: 31879:31879 transaction failed 29189, size 292-8 [ 2752.877990] binder: 31891:31891 transaction failed 29189, size 224-4 [ 2752.884735] binder: 31851:31851 transaction failed 29189, size 100-0 [ 2752.917663] binder: 31851:31851 transaction failed 29189, size 5348-4 [ 2753.003082] alarm_release: clear alarm, pending 0 [ 2753.008209] alarm_release: clear alarm, pending 0 [ 2753.243499] omap_monitor_zone:hot spot temp 94279 [ 2754.050354] request_suspend_state: wakeup (0->0) at 2754024597173 (2000-01-01 00:45:50.002624484 UTC) [ 2754.074890] init: untracked pid 31751 exited [ 2754.079956] init: untracked pid 31750 exited [ 2754.084747] init: untracked pid 31879 exited [ 2754.089416] init: untracked pid 31891 exited [ 2754.094390] init: untracked pid 31958 exited [ 2754.105621] init: untracked pid 31863 exited [ 2760.588409] request_suspend_state: wakeup (0->0) at 2760562622075 (2000-01-01 00:45:56.540649386 UTC) [ 2761.124206] acc_open [ 2761.126556] acc_release
Hi Josep,
Can you please point the link from where you fetched the images and the installation instructions ?
Also Can you run the command "logcat" once the device is booted up and share the logs. That will be more helpful to debug the issue.
Regards, Vishal
On 20 October 2012 23:31, Josep Soms josep.soms@lefthome.net wrote:
Dear Vishal,
From the Linaro mailing list, I think you are the expert for Pandaboard ES platform issues.
So your help for this problem would be very much appreciated:
I am just getting started with Android prebuilt images on Pandaboard ES platform, but I don’t have success with any prebuilt image available on your download section. As I’m not a Linux expert, prebuilt images are written on SD-Card with Win32 Disk Imager.
- Several prebuild images tested, but Android does not work with any of
them.
- 2 diferent boards tested, but unfortunately the result is the same (even
hadware validation is ok for both boards).
It has been observed the top of OMAP4460 device is getting very hot, so the board has been powered off in order to avoid any hardware damage. Several error messages on the terminal, unable to analyze all of them one by one.
Please could you help me ?
Thanks, Josep
P.D. For example, there are some of the error messages:
[ 2751.705169] acc_open [ 2751.707946] acc_release [ 2752.743469] omap_alert_zone:hot spot temp 101092 [ 2752.768890] binder: release 31777:31777 transaction 483178 in, still active [ 2752.776489] binder: send failed reply for transaction 483178 to 31918:31918 [ 2752.784301] binder: release 31777:31789 transaction 483160 in, still active [ 2752.791687] binder: send failed reply for transaction 483160 to 31891:31957 [ 2752.799468] binder: release 31777:31949 transaction 483141 in, still active [ 2752.806884] binder: send failed reply for transaction 483141 to 31891:31891 [ 2752.814392] binder: release 31777:31950 transaction 483176 in, still active [ 2752.821899] binder: send failed reply for transaction 483176 to 31879:31879 [ 2752.829681] binder: send failed reply for transaction 483179 to 31911:31911 [ 2752.837188] binder: send failed reply for transaction 483186 to 31958:31958 [ 2752.844848] binder: 31851:31851 transaction failed 29189, size 156-0 [ 2752.853607] binder: 31879:31879 transaction failed 29189, size 292-8 [ 2752.877990] binder: 31891:31891 transaction failed 29189, size 224-4 [ 2752.884735] binder: 31851:31851 transaction failed 29189, size 100-0 [ 2752.917663] binder: 31851:31851 transaction failed 29189, size 5348-4 [ 2753.003082] alarm_release: clear alarm, pending 0 [ 2753.008209] alarm_release: clear alarm, pending 0 [ 2753.243499] omap_monitor_zone:hot spot temp 94279 [ 2754.050354] request_suspend_state: wakeup (0->0) at 2754024597173 (2000-01-01 00:45:50.002624484 UTC) [ 2754.074890] init: untracked pid 31751 exited [ 2754.079956] init: untracked pid 31750 exited [ 2754.084747] init: untracked pid 31879 exited [ 2754.089416] init: untracked pid 31891 exited [ 2754.094390] init: untracked pid 31958 exited [ 2754.105621] init: untracked pid 31863 exited [ 2760.588409] request_suspend_state: wakeup (0->0) at 2760562622075 (2000-01-01 00:45:56.540649386 UTC) [ 2761.124206] acc_open [ 2761.126556] acc_release
Hi
Vishal Bhoj vishal.bhoj@linaro.org ha scritto:
Hi Josep,
Can you please point the link from where you fetched the images and the installation instructions ?
Also Can you run the command "logcat" once the device is booted up and share the logs. That will be more helpful to debug the issue.
I think that you don't install the binary for the opengl.
Michael
Regards, Vishal
On 20 October 2012 23:31, Josep Soms josep.soms@lefthome.net wrote:
Dear Vishal,
From the Linaro mailing list, I think you are the expert for
Pandaboard ES
platform issues.
So your help for this problem would be very much appreciated:
I am just getting started with Android prebuilt images on Pandaboard
ES
platform, but I don’t have success with any prebuilt image available
on
your download section. As I’m not a Linux expert, prebuilt images are written on SD-Card
with
Win32 Disk Imager.
- Several prebuild images tested, but Android does not work with any
of
them.
- 2 diferent boards tested, but unfortunately the result is the same
(even
hadware validation is ok for both boards).
It has been observed the top of OMAP4460 device is getting very hot,
so
the board has been powered off in order to avoid any hardware damage. Several error messages on the terminal, unable to analyze all of them
one
by one.
Please could you help me ?
Thanks, Josep
P.D. For example, there are some of the error messages:
[ 2751.705169] acc_open [ 2751.707946] acc_release [ 2752.743469] omap_alert_zone:hot spot temp 101092 [ 2752.768890] binder: release 31777:31777 transaction 483178 in,
still
active [ 2752.776489] binder: send failed reply for transaction 483178 to 31918:31918 [ 2752.784301] binder: release 31777:31789 transaction 483160 in,
still
active [ 2752.791687] binder: send failed reply for transaction 483160 to 31891:31957 [ 2752.799468] binder: release 31777:31949 transaction 483141 in,
still
active [ 2752.806884] binder: send failed reply for transaction 483141 to 31891:31891 [ 2752.814392] binder: release 31777:31950 transaction 483176 in,
still
active [ 2752.821899] binder: send failed reply for transaction 483176 to 31879:31879 [ 2752.829681] binder: send failed reply for transaction 483179 to 31911:31911 [ 2752.837188] binder: send failed reply for transaction 483186 to 31958:31958 [ 2752.844848] binder: 31851:31851 transaction failed 29189, size
156-0
[ 2752.853607] binder: 31879:31879 transaction failed 29189, size
292-8
[ 2752.877990] binder: 31891:31891 transaction failed 29189, size
224-4
[ 2752.884735] binder: 31851:31851 transaction failed 29189, size
100-0
[ 2752.917663] binder: 31851:31851 transaction failed 29189, size
5348-4
[ 2753.003082] alarm_release: clear alarm, pending 0 [ 2753.008209] alarm_release: clear alarm, pending 0 [ 2753.243499] omap_monitor_zone:hot spot temp 94279 [ 2754.050354] request_suspend_state: wakeup (0->0) at 2754024597173 (2000-01-01 00:45:50.002624484 UTC) [ 2754.074890] init: untracked pid 31751 exited [ 2754.079956] init: untracked pid 31750 exited [ 2754.084747] init: untracked pid 31879 exited [ 2754.089416] init: untracked pid 31891 exited [ 2754.094390] init: untracked pid 31958 exited [ 2754.105621] init: untracked pid 31863 exited [ 2760.588409] request_suspend_state: wakeup (0->0) at 2760562622075 (2000-01-01 00:45:56.540649386 UTC) [ 2761.124206] acc_open [ 2761.126556] acc_release
linaro-android mailing list linaro-android@lists.linaro.org http://lists.linaro.org/mailman/listinfo/linaro-android
linaro-android@lists.linaro.org
-
Josep Soms -
Michael Trimarchi -
Vishal Bhoj