linaro-dev June 2014

linaro-dev@lists.linaro.org

39 participants
60 discussions

[PATCH POWERTOP] Remove temporary file created during calibration

by Mohammad Merajul Islam Molla

powertop creates temporary file in /tmp folder during calibration. Simply closing does not remove these files. Instead use unlink to remove the file. diff --git a/src/calibrate/calibrate.cpp b/src/calibrate/calibrate.cpp index db368e0..1336c3f 100644 --- a/src/calibrate/calibrate.cpp +++ b/src/calibrate/calibrate.cpp @@ -242,7 +242,7 @@ static void *burn_disk(void *dummy) write(fd, buffer, 64*1024); fdatasync(fd); } - close(fd); + unlink(filename); return NULL; } -- Thanks, -Meraj

10 years, 2 months

[PATCH] Add pinctrl support in powerdebug

by Mohammad Merajul Islam Molla

Add support for pinctrl in powerdebug. Both dump and display modes supported. Tested only on Samsung Arndale board. Sample output in display mode on Arndale Board - Pin Name MUX Owner GPIO Owner HOG Function Group 0 gpa0-0 MUX UNCLAIMED GPIO UNCLAIMED 1 gpa0-1 MUX UNCLAIMED GPIO UNCLAIMED 2 gpa0-2 MUX UNCLAIMED GPIO UNCLAIMED 3 gpa0-3 MUX UNCLAIMED GPIO UNCLAIMED 4 gpa0-4 MUX UNCLAIMED GPIO UNCLAIMED 5 gpa0-5 MUX UNCLAIMED GPIO UNCLAIMED 6 gpa0-6 12c80000.i2c GPIO UNCLAIMED i2c2-bus-mux i2c2-bus-grp 7 gpa0-7 12c80000.i2c GPIO UNCLAIMED i2c2-bus-mux i2c2-bus-grp 8 gpa1-0 MUX UNCLAIMED GPIO UNCLAIMED 9 gpa1-1 MUX UNCLAIMED GPIO UNCLAIMED 10 gpa1-2 12c90000.i2c GPIO UNCLAIMED i2c3-bus-mux i2c3-bus-grp 11 gpa1-3 12c90000.i2c GPIO UNCLAIMED i2c3-bus-mux i2c3-bus-grp --- Android.mk | 2 +- Makefile | 2 +- README | 4 +- display.c | 3 +- display.h | 2 +- pinctrl.c | 329 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ pinctrl.h | 19 ++++ powerdebug.c | 35 +++++-- 8 files changed, 381 insertions(+), 15 deletions(-) create mode 100644 pinctrl.c create mode 100644 pinctrl.h diff --git a/Android.mk b/Android.mk index 36c73cd..19d00ca 100644 --- a/Android.mk +++ b/Android.mk @@ -29,6 +29,6 @@ LOCAL_C_INCLUDES += external/stlport/stlport/ \ LOCAL_SRC_FILES += \ powerdebug.c sensor.c clocks.c regulator.c \ - display.c tree.c utils.c mainloop.c gpio.c + display.c tree.c utils.c mainloop.c gpio.c pinctrl.c include $(BUILD_EXECUTABLE) diff --git a/Makefile b/Makefile index 2da9d67..f002438 100644 --- a/Makefile +++ b/Makefile @@ -5,7 +5,7 @@ CFLAGS?=-O1 -g -Wall -Wshadow CC?=gcc OBJS = powerdebug.o sensor.o clocks.o regulator.o gpio.o \ - display.o tree.o utils.o mainloop.o + display.o tree.o utils.o mainloop.o pinctrl.o default: powerdebug diff --git a/README b/README index 1479db1..b24dd98 100644 --- a/README +++ b/README @@ -1,8 +1,8 @@ powerdebug ---------- -This is a new tool which displays regulator, sensor and clock tree -information. +This is a new tool which displays regulator, sensor, clock tree, gpio and +pinctrl information. Current version only displays regulator information and clock tree from debugfs. Support will be added for sensors later. diff --git a/display.c b/display.c index 0000ee9..fb899c0 100644 --- a/display.c +++ b/display.c @@ -63,7 +63,8 @@ struct windata windata[] = { [CLOCK] = { .name = "Clocks" }, [REGULATOR] = { .name = "Regulators" }, [SENSOR] = { .name = "Sensors" }, - [GPIO] = { .name = "Gpio" }, + [GPIO] = { .name = "Gpio" }, + [PINCTRL] = { .name = "Pins" }, }; static void display_fini(void) diff --git a/display.h b/display.h index e3a1529..4496f30 100644 --- a/display.h +++ b/display.h @@ -13,7 +13,7 @@ * - initial API and implementation *******************************************************************************/ -enum { CLOCK, REGULATOR, SENSOR, GPIO }; +enum { CLOCK, REGULATOR, SENSOR, GPIO, PINCTRL }; struct display_ops { int (*display)(bool refresh); diff --git a/pinctrl.c b/pinctrl.c new file mode 100644 index 0000000..eef06e2 --- /dev/null +++ b/pinctrl.c @@ -0,0 +1,329 @@ + +/******************************************************************************* + * Copyright (C) 2014, Linaro Limited. + * + * This file is part of PowerDebug. + * + * All rights reserved. This program and the accompanying materials + * are made available under the terms of the Eclipse Public License v1.0 + * which accompanies this distribution, and is available at + * http://www.eclipse.org/legal/epl-v10.html + * + * Contributors: + * Mohammad Merajul Islam Molla <meraj.molla(a)samsung.com> + * (Samsung R&D Institute Bangladesh) + * - initial API and implementation + *******************************************************************************/ + +#ifndef _GNU_SOURCE +#define _GNU_SOURCE +#include <stdio.h> +#undef _GNU_SOURCE +#endif +#include <string.h> +#include <stdbool.h> +#include <unistd.h> +#include <stdlib.h> +#include <dirent.h> +#include <sys/stat.h> +#include <sys/types.h> + +#include "pinctrl.h" +#include "display.h" + +#define SIZE 64 +#define MAX_PINS 256 + +#define PIN_fmt "%*[^ ] %d" +#define NAME_fmt "%*[^(]( %s" +#define MUX_fmt "%*[^:]: %s" +#define GPIO_fmt "%*[^:]: %*[^ ] %s" +#define GPIO_fmt1 "%*[^:]: %*[^ ] %*[^ ] %s" + +#define SYS_PINCTRL "/sys/kernel/debug/pinctrl" + +static bool pinctrl_error = false; + +static struct pintcrl_info { + int pin; + char name[SIZE]; + char mux_owner[SIZE]; + char gpio_owner[SIZE]; + char hog[SIZE]; + char function[SIZE]; + char group[SIZE]; +} pins_info[MAX_PINS]; + +static int fill_pinctrl_info(); + +static int pinctrl_print_header(void) +{ + char *buf; + int ret; + + if (asprintf(&buf, "%-5s %-10s %-15s %-15s %-5s %-20s %-20s", + "Pin", "Name", "MUX Owner", "GPIO Owner", "HOG", "Function", + "Group") < 0) + return -1; + + ret = display_column_name(buf); + + free(buf); + + return ret; +} + +static char *pin_line(int pin) +{ + char *pinline = 0; + + if (asprintf(&pinline,"%-5d %-10s %-15s %-15s %-5s %-20s %-20s", + pins_info[pin].pin, pins_info[pin].name, + pins_info[pin].mux_owner, pins_info[pin].gpio_owner, + pins_info[pin].hog, pins_info[pin].function, + pins_info[pin].group) < 0) + return NULL; + + return pinline; +} + +static int pinctrl_print_info() +{ + int i; + int line = 0; + char *buffer; + + display_reset_cursor(PINCTRL); + + pinctrl_print_header(); + + for (i = 0; i < MAX_PINS; i++) { + if (pins_info[i].pin == -1) + continue; + + buffer = pin_line(i); + if (!buffer) + return -1; + + display_print_line(PINCTRL, line, buffer, 0, NULL); + line++; + + free(buffer); + } + + display_refresh_pad(PINCTRL); + + return 0; +} + +static int dump_pinctrl_info() +{ + int i; + + for (i = 0; i < MAX_PINS; i++) { + if (pins_info[i].pin == -1) + continue; + printf("\tPin %d: (Name: %s, MUX_owner: %s, GPIO_owner: %s, HOG: %s, Function: %s, Group: %s)\n", + pins_info[i].pin, pins_info[i].name, + pins_info[i].mux_owner, pins_info[i].gpio_owner, + pins_info[i].hog, + pins_info[i].function, pins_info[i].group); + } + + return 0; +} + + +int pinctrl_dump() +{ + int ret; + + if (pinctrl_error) + return -1; + + printf("\nPin Information:\n"); + printf("****************\n"); + ret = dump_pinctrl_info(); + printf("\n\n"); + + return ret; + +} + +static int pinctrl_display(bool refresh) +{ + if (pinctrl_error) { + display_message(PINCTRL, + "error: path " SYS_PINCTRL " not found or not root"); + return -2; + } + + if (refresh && fill_pinctrl_info()) + return -1; + + return pinctrl_print_info(); +} + +static struct display_ops pinctrl_ops = { + .display = pinctrl_display, +}; + +static int read_pin_info(const char *path) +{ + FILE *fpinmux; + int pin; + int ret = 0; + char *p; + char buf[4096]; + + fpinmux = fopen(path, "r"); + if (!fpinmux) { + printf("error: failed to read %s\n", path); + return -1; + } + + /* first two lines are headers, ignore */ + fgets(buf, 4096, fpinmux); + fgets(buf, 4096, fpinmux); + + while (fgets(buf, 4096, fpinmux)) { + int mux_owner = 0; + + /* get pin number */ + sscanf(buf, PIN_fmt, &pin); + + if (pin >= MAX_PINS) { + printf("WARNING: # of pins > max pins (256), need to increase limit\n"); + continue; + } + + pins_info[pin].pin = pin; + sscanf(buf, NAME_fmt, pins_info[pin].name); + pins_info[pin].name[strlen(pins_info[pin].name) - 2] = '\0'; + + if (strstr(buf, "MUX UNCLAIMED")) + strcpy(pins_info[pin].mux_owner, "MUX UNCLAIMED"); + else { + sscanf(buf, MUX_fmt, pins_info[pin].mux_owner); + mux_owner = 1; + } + + if (strstr(buf, "GPIO UNCLAIMED")) + strcpy(pins_info[pin].gpio_owner, "GPIO UNCLAIMED"); + else { + if (mux_owner) + sscanf(buf, GPIO_fmt, pins_info[pin].gpio_owner); + else + sscanf(buf, GPIO_fmt1, pins_info[pin].gpio_owner); + } + + if (strstr(buf, "HOG")) + strcpy(pins_info[pin].hog, "HOG"); + else + strcpy(pins_info[pin].hog, ""); + + if ((p = strstr(buf, "function"))) { + p += 9; + sscanf(p, "%s", pins_info[pin].function); + } + else + strcpy(pins_info[pin].function, ""); + + if ((p = strstr(buf, "group"))) { + p += 5; + sscanf(p, "%s", pins_info[pin].group); + } + else + strcpy(pins_info[pin].group, ""); + } + + fclose(fpinmux); + return ret; +} + +static void init_pins_info() +{ + int i; + + memset(pins_info, 0, sizeof(pins_info)); + + for (i = 0; i < MAX_PINS; i++) + pins_info[i].pin = -1; +} + +static int fill_pinctrl_info() +{ + DIR *dir; + char *newpath, *pinmux_path; + struct dirent dirent, *direntp; + struct stat s; + int ret = 0; + + dir = opendir(SYS_PINCTRL); + if (!dir) { + printf("error: unable to open directory " SYS_PINCTRL); + ret = -1; + goto out; + } + + init_pins_info(); + + while (!readdir_r(dir, &dirent, &direntp)) { + ret = 0; + + if (!direntp) + break; + + if (direntp->d_name[0] == '.') + continue; + + ret = asprintf(&newpath, "%s/%s", SYS_PINCTRL, direntp->d_name); + if (ret < 0) + goto out; + + ret = stat(newpath, &s); + if (ret) + goto out_free_newpath; + + if (S_ISDIR(s.st_mode)) { + ret = asprintf(&pinmux_path, "%s/%s", newpath, + "pinmux-pins"); + if (ret < 0) + goto out_free_newpath; + + if (read_pin_info(pinmux_path)) { + ret = -1; + goto out_free_pinmux; + } + } + } + +out_free_pinmux: + free(pinmux_path); + +out_free_newpath: + free(newpath); + +out: + closedir(dir); + return ret; +} + +int pinctrl_init(void) +{ + int ret = 0; + + ret = display_register(PINCTRL, &pinctrl_ops); + if (ret) + printf("error: pinctrl display register failed"); + + if (access(SYS_PINCTRL, F_OK)) { + pinctrl_error = true; + return -1; + } + + if (fill_pinctrl_info()) + return -1; + + return ret; +} diff --git a/pinctrl.h b/pinctrl.h new file mode 100644 index 0000000..2fa4f3a --- /dev/null +++ b/pinctrl.h @@ -0,0 +1,19 @@ +/******************************************************************************* + * Copyright (C) 2014, Linaro Limited. + * + * This file is part of PowerDebug. + * + * All rights reserved. This program and the accompanying materials + * are made available under the terms of the Eclipse Public License v1.0 + * which accompanies this distribution, and is available at + * http://www.eclipse.org/legal/epl-v10.html + * + * Contributors: + * Mohammad merajul Islam Molla <meraj.molla(a)samsung.com> + * (Samsung R&D Institute Bangladesh) + * + * - initial API and implementation + *******************************************************************************/ + +extern int pinctrl_init(void); +extern int pinctrl_dump(void); diff --git a/powerdebug.c b/powerdebug.c index 6cf3a1b..b4f4833 100644 --- a/powerdebug.c +++ b/powerdebug.c @@ -26,6 +26,7 @@ #include "clocks.h" #include "sensor.h" #include "gpio.h" +#include "pinctrl.h" #include "mainloop.h" #include "powerdebug.h" @@ -35,13 +36,14 @@ void usage(void) { printf("Usage: powerdebug [OPTIONS]\n"); printf("\n"); - printf("powerdebug -d [ -r ] [ -s ] [ -c [ -p <clock-name> ] ] " + printf("powerdebug -d [ -r ] [ -s ] [ -p ][ -c [ -P <clock-name> ] ] " "[ -v ]\n"); - printf("powerdebug [ -r | -s | -c ]\n"); + printf("powerdebug [ -r | -s | -c | -p] \n"); printf(" -r, --regulator Show regulator information\n"); printf(" -s, --sensor Show sensor information\n"); printf(" -c, --clock Show clock information\n"); - printf(" -p, --findparents Show all parents for a particular" + printf(" -p, --pin Show pin information\n"); + printf(" -P, --findparents Show all parents for a particular" " clock\n"); printf(" -t, --time Set ticktime in seconds (eg. 10.0)\n"); printf(" -d, --dump Dump information once (no refresh)\n"); @@ -62,7 +64,8 @@ void version() * -s, --sensor : sensors * -c, --clock : clocks * -g, --gpio : gpios - * -p, --findparents : clockname whose parents have to be found + * -p, --pin : pins + * -P, --findparents : clockname whose parents have to be found * -t, --time : ticktime * -d, --dump : dump * -v, --verbose : verbose @@ -76,7 +79,8 @@ static struct option long_options[] = { { "sensor", 0, 0, 's' }, { "clock", 0, 0, 'c' }, { "gpio", 0, 0, 'g' }, - { "findparents", 1, 0, 'p' }, + { "pin", 0 , 0, 'p' }, + { "findparents", 1, 0, 'P' }, { "time", 1, 0, 't' }, { "dump", 0, 0, 'd' }, { "verbose", 0, 0, 'v' }, @@ -91,6 +95,7 @@ struct powerdebug_options { bool sensors; bool clocks; bool gpios; + bool pins; bool dump; unsigned int ticktime; int selectedwindow; @@ -108,7 +113,7 @@ int getoptions(int argc, char *argv[], struct powerdebug_options *options) while (1) { int optindex = 0; - c = getopt_long(argc, argv, "rscgp:t:dvVh", + c = getopt_long(argc, argv, "rscgpP:t:dvVh", long_options, &optindex); if (c == -1) break; @@ -131,6 +136,10 @@ int getoptions(int argc, char *argv[], struct powerdebug_options *options) options->selectedwindow = GPIO; break; case 'p': + options->pins = true; + options->selectedwindow = PINCTRL; + break; + case 'P': options->clkname = strdup(optarg); if (!options->clkname) { fprintf(stderr, "failed to allocate memory"); @@ -161,9 +170,9 @@ int getoptions(int argc, char *argv[], struct powerdebug_options *options) /* No system specified to be dump, let's default to all */ if (!options->regulators && !options->clocks && - !options->sensors && !options->gpios) - options->regulators = options->clocks = - options->sensors = options->gpios = true; + !options->sensors && !options->gpios && !options->pins) + options->regulators = options->clocks = options->sensors = + options->gpios = options->pins = true; if (options->selectedwindow == -1) options->selectedwindow = CLOCK; @@ -185,6 +194,9 @@ static int powerdebug_dump(struct powerdebug_options *options) if (options->gpios) gpio_dump(); + if (options->pins) + pinctrl_dump(); + return 0; } @@ -266,6 +278,11 @@ int main(int argc, char **argv) options->gpios = false; } + if (pinctrl_init()) { + printf("failed to initialize pinctrl\n"); + options->pins = false; + } + ret = options->dump ? powerdebug_dump(options) : powerdebug_display(options); -- Thanks, -Meraj

10 years, 3 months

[PATCH POWERTOP] Fix various resource leaks

by Mohammad Merajul Islam Molla

Fixes some resource leaks detected by valgrind and coverity scan. diff --git a/src/devices/ahci.cpp b/src/devices/ahci.cpp index ac06460..7f704b6 100644 --- a/src/devices/ahci.cpp +++ b/src/devices/ahci.cpp @@ -64,8 +64,10 @@ static string disk_name(char *path, char *target, char *shortname) sprintf(line, "%s/%s/model", pathname, dirent->d_name); file = fopen(line, "r"); if (file) { - if (fgets(line, 4096, file) == NULL) + if (fgets(line, 4096, file) == NULL) { + fclose(file); break; + } fclose(file); c = strchr(line, '\n'); if (c) diff --git a/src/devices/devfreq.cpp b/src/devices/devfreq.cpp index e16951c..23c4b0c 100644 --- a/src/devices/devfreq.cpp +++ b/src/devices/devfreq.cpp @@ -238,6 +238,7 @@ void create_all_devfreq_devices(void) callback fn = &devfreq_dev_callback; process_directory(p.c_str(), fn); + closedir(dir); } void initialize_devfreq(void) diff --git a/src/perf/perf_bundle.cpp b/src/perf/perf_bundle.cpp index b0e982b..cf1ae11 100644 --- a/src/perf/perf_bundle.cpp +++ b/src/perf/perf_bundle.cpp @@ -142,8 +142,10 @@ static void parse_event_format(const char *event_name) buf = read_file(file); free(file); - if (!buf) + if (!buf) { + free(name); return; + } pevent_parse_event(perf_event::pevent, buf, strlen(buf), sys); free(name); diff --git a/src/tuning/bluetooth.cpp b/src/tuning/bluetooth.cpp index e0bdf12..5100a8a 100644 --- a/src/tuning/bluetooth.cpp +++ b/src/tuning/bluetooth.cpp @@ -144,8 +144,10 @@ int bt_tunable::good_bad(void) if (file) { char line[2048]; /* first line is standard header */ - if (fgets(line, 2047, file) == NULL) + if (fgets(line, 2047, file) == NULL) { + pclose(file); goto out; + } memset(line, 0, 2048); if (fgets(line, 2047, file) == NULL) { result = last_check_result = TUNE_GOOD; -- Thanks, -Meraj

10 years, 3 months

[PATCH] pm-qa/cpuhotplug: Enable cpuhotplug on cpu0

by Lisa Nguyen

Pass hotplug_cpu_start=0 to make check like these examples below: sudo make -C cpuhotplug hotplug_cpu_start=0 check sudo make hotplug_cpu_start=0 check to enable cpuhotplug to run on cpu0 to N. The hotplug_cpu_start variable will take the default value of 1 if no value is passed so cpuhotplug will run on cpu1 to N. This fixes bug #49: https://bugs.linaro.org/show_bug.cgi?id=49 Signed-off-by: Lisa Nguyen <lisa.nguyen(a)linaro.org> --- Makefile | 4 +++- cpuhotplug/Makefile | 2 +- cpuhotplug/cpuhotplug_02.sh | 2 +- cpuhotplug/cpuhotplug_03.sh | 2 +- cpuhotplug/cpuhotplug_04.sh | 2 +- cpuhotplug/cpuhotplug_05.sh | 2 +- cpuhotplug/cpuhotplug_06.sh | 2 +- cpuhotplug/cpuhotplug_07.sh | 2 +- cpuhotplug/cpuhotplug_08.sh | 6 +++++- 9 files changed, 15 insertions(+), 9 deletions(-) diff --git a/Makefile b/Makefile index 731619d..24bbd59 100644 --- a/Makefile +++ b/Makefile @@ -22,13 +22,15 @@ # - initial API and implementation # +hotplug_cpu_start?=1 + all: @(cd utils; $(MAKE)) check: @(cd utils; $(MAKE) check) @(cd cpufreq; $(MAKE) check) - @(cd cpuhotplug; $(MAKE) check) + @(cd cpuhotplug; $(MAKE) hotplug_cpu_start=${hotplug_cpu_start} check) @(cd cpuidle; $(MAKE) check) # @(cd suspend; $(MAKE) check) @(cd thermal; $(MAKE) check) diff --git a/cpuhotplug/Makefile b/cpuhotplug/Makefile index df0b8f4..a6670c3 100644 --- a/cpuhotplug/Makefile +++ b/cpuhotplug/Makefile @@ -21,5 +21,5 @@ # Daniel Lezcano <daniel.lezcano(a)linaro.org> (IBM Corporation) # - initial API and implementation # - +export hotplug_cpu_start?=1 include ../Test.mk diff --git a/cpuhotplug/cpuhotplug_02.sh b/cpuhotplug/cpuhotplug_02.sh index 3157307..3f678b9 100755 --- a/cpuhotplug/cpuhotplug_02.sh +++ b/cpuhotplug/cpuhotplug_02.sh @@ -33,7 +33,7 @@ check_state() { local state= shift 1 - if [ "$cpu" == "cpu0" ]; then + if [[ "$cpu" == "cpu0" && $hotplug_cpu_start -ne 0 ]]; then return 0 fi diff --git a/cpuhotplug/cpuhotplug_03.sh b/cpuhotplug/cpuhotplug_03.sh index 13a0ce9..57ff40e 100755 --- a/cpuhotplug/cpuhotplug_03.sh +++ b/cpuhotplug/cpuhotplug_03.sh @@ -33,7 +33,7 @@ check_affinity_fails() { local dirpath=$CPU_PATH/$1 local ret= - if [ "$cpu" == "cpu0" ]; then + if [[ "$cpu" == "cpu0" && $hotplug_cpu_start -ne 0 ]]; then return 0 fi diff --git a/cpuhotplug/cpuhotplug_04.sh b/cpuhotplug/cpuhotplug_04.sh index 394a512..9c08fba 100755 --- a/cpuhotplug/cpuhotplug_04.sh +++ b/cpuhotplug/cpuhotplug_04.sh @@ -36,7 +36,7 @@ check_task_migrate() { local pid= local ret= - if [ "$cpu" == "cpu0" ]; then + if [[ "$cpu" == "cpu0" && $hotplug_cpu_start -ne 0 ]]; then return 0 fi diff --git a/cpuhotplug/cpuhotplug_05.sh b/cpuhotplug/cpuhotplug_05.sh index a8eb312..f5eb994 100755 --- a/cpuhotplug/cpuhotplug_05.sh +++ b/cpuhotplug/cpuhotplug_05.sh @@ -32,7 +32,7 @@ check_procinfo() { local cpuid=${cpu:3} local ret= - if [ "$cpu" == "cpu0" ]; then + if [[ "$cpu" == "cpu0" && $hotplug_cpu_start -ne 0 ]]; then return 0 fi diff --git a/cpuhotplug/cpuhotplug_06.sh b/cpuhotplug/cpuhotplug_06.sh index 347906d..93fbadd 100755 --- a/cpuhotplug/cpuhotplug_06.sh +++ b/cpuhotplug/cpuhotplug_06.sh @@ -32,7 +32,7 @@ check_procinfo() { local cpuid=${cpu:3} local ret= - if [ "$cpu" == "cpu0" ]; then + if [[ "$cpu" == "cpu0" && $hotplug_cpu_start -ne 0 ]]; then return 0 fi diff --git a/cpuhotplug/cpuhotplug_07.sh b/cpuhotplug/cpuhotplug_07.sh index eaeba77..2457891 100755 --- a/cpuhotplug/cpuhotplug_07.sh +++ b/cpuhotplug/cpuhotplug_07.sh @@ -34,7 +34,7 @@ check_notification() { local pid= local ret= - if [ "$cpu" == "cpu0" ]; then + if [[ "$cpu" == "cpu0" && $hotplug_cpu_start -ne 0 ]]; then return 0 fi diff --git a/cpuhotplug/cpuhotplug_08.sh b/cpuhotplug/cpuhotplug_08.sh index 9e2c355..52e1fc2 100755 --- a/cpuhotplug/cpuhotplug_08.sh +++ b/cpuhotplug/cpuhotplug_08.sh @@ -28,7 +28,11 @@ source ../include/functions.sh function randomize() { - echo $[ ( $RANDOM % $1 ) + 1 ] + if [ $hotplug_cpu_start -ne 0 ]; then + echo $[ ( $RANDOM % $1 ) + 1 ] + else + echo $[ ( $RANDOM % $1 ) ] + fi } random_stress() { -- 1.7.9.5

10 years, 3 months

pinctrl support in powerdebug

by Mohammad Merajul Islam Molla

Hello Amit, As discussed, I made a patch to support pinctrl in powerdebug. It will display the below information - Pin Name MUX Owner GPIO Owner HOG Function Group Both dump and display modes are supported. Only tested on Samsung Arndale board. Patch attached. Please check if its useful. -- Thanks, -Meraj

10 years, 3 months

[ACTIVITY] week 26

by Dileep Katta

== Progress == * Enabling UEFI Fastboot on Panda - on hold (CARD-198: 0 %) * CARD 1103: Flash support on u-boot fastboot,Fixed Getvar and download size related issues, Interface change from MMC->DFU is in progress (CARD-1103: 100%) == Plans == * CARD-198: Pause (0%) * CARD 1103: Flash support on u-boot fastboot, replace MMC calls with DFU and submit for review. (CARD-1103: 40%) * CARD 1103: Test the Flashing support and submit the patches. (CARD-1103: 60%) == Issues == * None

10 years, 3 months

[ACTIVITY] week 26

by Andrey Konovalov

== Progress == * linux-linaro-core-tracking tree updated to v3.16-rc2, linaro-android topic is back, the linux-linaro schedule for 2014.07 cycle created, the root cause for llct CI build failures since moving to 3.16 found (CARD-788, 75%) * adding QCOM LT tree to linux-linaro is in progress: rebased the QCOM LT tree onto current llct, built the kernel, created the images to flash using fastboot using the QCOM LT's 3.14 jenkins jobs as the template, but the result failed to boot in LAVA (CARD-788, 25%) * DEVPLAT-210 "upstream: fastboot in u-boot": synced up with Dileep (0%) == Plans == * fix the llct/ll CI builds (CARD-788) * move linux-linaro-core-tracking and linux-linaro to v3.16-rc3 (CARD-788) * add QCOM LT tree to linux-linaro (CARD-788) * complete the ILP32 topic branch for ll, sanity check it with LTP in LP64, identify the missing components needed for testing in ILP32 (CARD-1161) * follow up on: . DEVPLAT-210 "upstream: fastboot in u-boot" . bug 1189839 "kernel crash on arndale while CPU hotplug" * update the wiki doc for DEVPLAT-204

10 years, 3 months

[ACTIVITY] Week26

by Wookey

== Progress == * Tended buildds. Now Debian arm64 is passed 75% built (and sparc64) (DEVPLAT-219: 10%) http://buildd.debian-ports.org/stats/graph-quarter-big.png * Tested/updated Chen's bugfixes, and bugrepped/NMUed 34 packages with old bugs. (DEVPLAT-219: 40%) * Worked on zookeeper/openjdk crash issue with Ed (DEVPLAT-219: 20%) * Agreed with maintainer to drop emacs23 so we don't have to fix it * Looked at remaining unbuilt packages in SCC * Got wxwidgets and dirac built (DEVPLAT-219: 5%) * Updated cross-toolchain packages to current binutils and gcc-4.9. lots of breakage (10%) * GSOC midterm evaluation (15% == Plans == * Finish/test/upload openjdk/zookeeper * Fix/NMU remaining packages in SCC http://people.debian.org/~wookey/bootstrap/blockerlist * Investigate PDF build errors. * Mail release team about arm64 prospects == Issues == NMUing gets tedious. Wookey -- Principal hats: Linaro, Emdebian, Wookware, Balloonboard, ARM http://wookware.org/

10 years, 3 months

[ACTIVITY] Week 26

by Harigopal Gollamudi

== Progress == CARD-1489: Migrated android builds to 4.9 toolchain. Built the code. The images are working on LAVA boards. == Plans == Need to take up new assignments == Issues == None -- Thanks and Regards, HariGopal G Android Engineer

10 years, 3 months

[ACTIVITY] week 26

by Riku Voipio

== Progress * KVM armv8 loop (CARD-346 80%) * firefox buildfix for OE/Alip 10% * vexpress/TC2 boot debugging (BUG-8 10%) == Plans == * Vacation! == Issues == * None

10 years, 3 months

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

linaro-dev June 2014