Hi,<br><br>I tried booting linux-linaro-2.6.37 kernel on my beagle board C4. I executed following:<br><br>1. Installed linaro on a 4 GB SD card using linaro-image-tools 0.4.1 with hwpack daily snapshot hwpack_linaro-omap3_20110125-0_armel_supported.tar.gz and linaro-natty-headless-tar-20101202-1.tar.gz. It was booting properly on my BB. <br>
<br>2. Cloned linux-linaro-2.6.37. Changed to source directory<br><br>3. make ARCH=arm CROSS_COMPILE=arm-linux-gnueabi- omap2plus_defconfig<br><br>4. make ARCH=arm CROSS_COMPILE=arm-linux-gnueabi- menuconfig (enabled EARLY_PRINTK)<br>
<br>5. make ARCH=arm CROSS_COMPILE=arm-linux-gnueabi- uImage<br><br>6. make ARCH=arm CROSS_COMPILE=arm-linux-gnueabi- modules<br><br>7. make ARCH=arm CROSS_COMPILE=arm-linux-gnueabi- modules_install INSTALL_MOD_PATH=/media/rootfs<br>
<br>8. cp arch/arm/boot/uImage /media/boot; sync<br><br>Everything went on smoothly. Then I put the SD card on BB and powered it on. I got a kernel panic: <a href="http://paste.ubuntu.com/560562">http://paste.ubuntu.com/560562</a><br>
<br>Please help me figuring out the problem. Is it because I didn&#39;t create uInitrd? If so, then how to create it for ARM?<br><br>Regards,<br>Avik<br>