Dave,

On Thu, Sep 20, 2012 at 10:10 AM, Lei Wen <adrian.wenl@gmail.com> wrote:

Hi Dave,

On Thu, Sep 20, 2012 at 12:38 AM, Dave Martin <dave.martin@linaro.org> wrote:

On Tue, Sep 18, 2012 at 04:58:21PM -0500, Andy Doan wrote:
> On 09/17/2012 04:01 AM, Dave Pigott wrote:
> >Hi Lei,
> >
> >I'm copying Andy Doan directly on this, since he's had more experience
> >of getting FM working in LAVA and can probably point you in the right
> >direction.
> >
> >Thanks
> >
> >Dave
> >
> >On 14 Sep 2012, at 14:35, Lei Wen wrote:
> >
> >>Hi Dave,
> >>
> >>On Fri, Sep 14, 2012 at 3:58 PM, Dave Pigott <dave.pigott@linaro.org
> >><mailto:dave.pigott@linaro.org>> wrote:
> >>
> >>    Hi Lei,
> >>
> >>    We run Fast Models on 64 bit all the time. How are you creating
> >>    the model, and how are you trying to launch it?
> >>
> >>
> >>I launch the fast model by below command:
> >>model_shell cadi_system_Linux64-Release-GCC-4.4.so

Should you be running model_shell64 instead?

The model_shell64 also complain for the same error as

"Not a CADI 2.0 model"...

> >><http://cadi_system_Linux64-Release-GCC-4.4.so/>
> >>boot-wrapper/linux-system-semi.axf -f params
>
> Looks like you do things different than we do. The way we launch
> things is with:
>
> /opt/arm/RTSM_A15-A7x14_VE/Linux64_RTSM_VE_Cortex-A15x4-A7x4/RTSM_VE_Cortex-A15x4-A7x4
>
>   -a coretile.cluster0.*=img.axf
>   -C motherboard.mmc.p_mmc_file=sd.img
>   -C coretile.cluster0.cpu0.semihosting-enable=1
>   -C motherboard.hostbridge.userNetworking=1
>   -C coretile.cache_state_modelled=0
>   -C motherboard.smsc_91c111.enabled=1
>
> I also follow pages like:
>
>  https://wiki.linaro.org/Platform/Android/AndroidOnFastModels

I believe that the pre-built RTSM binaries are integrated simulation
builds (i.e., like isim_system).  So the required command-line for
the isim_system binary built by the fast models package should be
similar to the examples we document for launching the RTSM binaries.

Yes, it is similar. Thanks for the hint.

Here is another issue, although the simulation is ok for running A15x1,

but when I am trying to run the A15x4_A7x4, the simulation cannot be launched up,

with the same configuration I could run at the 32bit machine.

The screen snap shot could be found at:

https://lh4.googleusercontent.com/-M8G9kBQztNI/UFqGMGqetNI/AAAAAAAAACg/_1JGgppMhU4/s768/a15x4_a7x4.jpg

And the launch command I am using:

./isim_system  -a coretile.cluster0.*=boot-wrapper/linux-system-semi.axf -a coretile.cluster1.*=boot-wrapper/linux-system-semi.axf -f params

Where the params is a file, containing:

motherboard.smsc_91c111.enabled=1

motherboard.hostbridge.userNetworking=1

coretile.dualclustersystemconfigurationblock.CFG_ACTIVECLUSTER=0x3

coretile.cluster0.cpu0.semihosting-cmd_line="--kernel uImage --fdt rtsm_ve-v2p-ca15x4-ca7x4.dtb -- console=ttyAMA0 mem=2048M root=/dev/nfs nfsroot=192.168.1.1:/srv/nfsroot/ rw ip=dhcp"

Any idea?