Manjunath Goudar

On 13 June 2013 14:46, Manjunath Goudar <manjunath.goudar@linaro.org> wrote:

Suspend scenario in case of ohci bus glue was not properly handled as
it was not suspending generic part of ohci controller. Calling
explicitly the ohci_suspend()routine will ensure proper handling
of suspend scenario.

V2:
-Incase ohci_suspend() fails, return right away without executing further.

Manjunath Goudar (10):
USB: OHCI: Properly handle ohci-at91 suspend
USB: OHCI: Properly handle ohci-s3c2410 suspend
USB: OHCI: Properly handle ohci-da8xx suspend
USB: OHCI: Properly handle ohci-ep93xx suspend
USB: OHCI: Properly handle ohci-exynos suspend
USB: OHCI: Properly handle ohci-omap suspend
USB: OHCI: Properly handle ohci-platform suspend
USB: OHCI: Properly handle ohci-pxa27x suspend
USB: OHCI: Properly handle ohci-sm501 suspend
USB: OHCI: Properly handle ohci-spear suspend

drivers/usb/host/ohci-at91.c | 14 ++++++++++++--
drivers/usb/host/ohci-da8xx.c | 19 +++++++++++++++----
drivers/usb/host/ohci-ep93xx.c | 12 +++++++++++-
drivers/usb/host/ohci-exynos.c | 8 ++++++++
drivers/usb/host/ohci-omap.c | 17 ++++++++++++++---
drivers/usb/host/ohci-platform.c | 13 ++++++++++++-
drivers/usb/host/ohci-pxa27x.c | 12 +++++++++++-
drivers/usb/host/ohci-s3c2410.c | 8 ++++++++
drivers/usb/host/ohci-sm501.c | 15 +++++++++++++--
drivers/usb/host/ohci-spear.c | 16 +++++++++++++---

10 files changed, 117 insertions(+), 17 deletions(-)

--
1.7.9.5