Hi Fathi,

Thanks for your response. I tried what you asked. Here is the output:
----------------------------------------------------------------------------------------------------
anilss@anilss:~/linaro/openembedded$ cd jenkins-setup/
anilss@anilss:~/linaro/openembedded/jenkins-setup$ bash init-and-build.sh

GCC version: 4.8
Target architecture: armv8


object e76efdd7b342577c40aa271fa5ded9d66a783a9b
type commit
tag v1.12.4
tagger Conley Owens <cco3@android.com> 1380645867 -0700

repo 1.12.4

gpg: Signature made Tuesday 01 October 2013 10:14:27 PM IST using RSA key ID 692B382C
gpg: Can't check signature: public key not found
error: could not verify the tag 'v1.12.4'


fatal: repo init failed; run without --quiet to see why
error: command 'sync' requires repo to be installed first.
        Use "repo init" to install it here.

real    0m0.028s
user    0m0.016s
sys     0m0.008s
init-and-build.sh: line 50: cd: poky: No such file or directory
init-and-build.sh: line 53: oe-init-build-env: No such file or directory
./functions.sh: line 70: conf/bblayers.conf: No such file or directory
/home/anilss/linaro/openembedded/jenkins-setup/../openembedded-core/meta: No such file or directory
./functions.sh: line 84: conf/bblayers.conf: No such file or directory
./functions.sh: line 92: conf/site.conf: No such file or directory
./functions.sh: line 147: conf/site.conf: No such file or directory
sed: can't read conf/local.conf: No such file or directory

plenty of space, no cleanup
init-and-build.sh: line 62: bitbake: command not found
anilss@anilss:~/linaro/openembedded/jenkins-setup$


Thanks and Regards,
Anil



On 9 October 2013 17:09, Fathi Boudra <fathi.boudra@linaro.org> wrote:
On 9 October 2013 14:12, Anil Singhar <anil.singhar@linaro.org> wrote:
> Hi:
>
> I am trying to prepare a cross compilation environment for porting some
> packages to aarch64. My final objective is:
>
> (i) To be able to build a given package (such as klibc) on x86_64 Ubuntu
> machine and
> (ii) To be able to build the same package without any changes natively on
> ARMv8 Foundation model
> (iii) To be able to run the package on ARMv8 foundation model.
>
> In this context, I am contemplating the following steps:
> (a) Cross compile "Linux genericarmv8 3.10.1.0-1-linaro-vexpress64", which
> is used on the foundation model, on x86_64 machine.
>
> to avoid any in-compatibilty.
>
> (b) Cross compile the package (e.g. klibc)
>
> At this point, I am trying to do (a), i.e. cross compile "Linux genericarmv8
> 3.10.1.0-1-linaro-vexpress64". I followed the steps @
> http://releases.linaro.org/13.07/openembedded/aarch64/
> under the section: "Building from Source"
>
> I run into the following error:
> ------------------------------------------
> anilss@anilss:~/linaro/openembedded$ bash jenkins-setup/init-and-build.sh
>
> GCC version: 4.8
> Target architecture: armv8
>
> object e76efdd7b342577c40aa271fa5ded9d66a783a9b
> type commit
> tag v1.12.4
> tagger Conley Owens <cco3@android.com> 1380645867 -0700
>
> repo 1.12.4
>
> gpg: Signature made Tuesday 01 October 2013 10:14:27 PM IST using RSA key ID
> 692B382C
> gpg: Can't check signature: public key not found
> error: could not verify the tag 'v1.12.4'
>
> fatal: repo init failed; run without --quiet to see why
> error: command 'sync' requires repo to be installed first.
>         Use "repo init" to install it here.
>
> real    0m0.034s
> user    0m0.032s
> sys     0m0.000s
> jenkins-setup/init-and-build.sh: line 50: cd: poky: No such file or
> directory
> jenkins-setup/init-and-build.sh: line 53: oe-init-build-env: No such file or
> directory
> jenkins-setup/functions.sh: line 70: conf/bblayers.conf: No such file or
> directory
> /home/anilss/linaro/openembedded/../openembedded-core/meta: No such file or
> directory
> jenkins-setup/functions.sh: line 84: conf/bblayers.conf: No such file or
> directory
> jenkins-setup/functions.sh: line 92: conf/site.conf: No such file or
> directory
> jenkins-setup/functions.sh: line 147: conf/site.conf: No such file or
> directory
> sed: can't read conf/local.conf: No such file or directory
>
> plenty of space, no cleanup
> jenkins-setup/init-and-build.sh: line 62: bitbake: command not found
> anilss@anilss:~/linaro/openembedded$
> ---------------------------------------------------------------------------------------------------------------------------------
>
> Is there anything I am missing that is not mentioned in those steps..?

could you try:
$ cd jenkins-setup
$ bash init-and-build.sh

> Greatly appreciate any help.
>
> Thanks and Regards,
> Anil