diff --git a/drivers/usb/host/isp1760-hcd.c b/drivers/usb/host/isp1760-hcd.c
index bdba8c5..9cb8722 100644
--- a/drivers/usb/host/isp1760-hcd.c
+++ b/drivers/usb/host/isp1760-hcd.c
@@ -1049,17 +1049,6 @@ static void do_atl_int(struct usb_hcd *usb_hcd)
 		if (!nakcount && (dw3 & DW3_QTD_ACTIVE)) {
 			u32 buffstatus;
 
-			/*
-			 * NAKs are handled in HW by the chip. Usually if the
-			 * device is not able to send data fast enough.
-			 * This happens mostly on slower hardware.
-			 */
-			printk(KERN_NOTICE "Reloading ptd %p/%p... qh %p read: "
-					"%d of %zu done: %08x cur: %08x\n", qtd,
-					urb, qh, PTD_XFERRED_LENGTH(dw3),
-					qtd->length, done_map,
-					(1 << queue_entry));
-
 			/* RL counter = ERR counter */
 			dw3 &= ~(0xf << 19);
 			dw3 |= rl << 19;
@@ -1770,7 +1759,7 @@ static irqreturn_t isp1760_irq(struct usb_hcd *usb_hcd)
 		goto leave;
 
 	isp1760_writel(imask, usb_hcd->regs + HC_INTERRUPT_REG);
-	if (imask & HC_ATL_INT)
+	if (imask & (HC_ATL_INT | HC_SOT_INT))
 		do_atl_int(usb_hcd);
 
 	if (imask & HC_INTL_INT)
diff --git a/drivers/usb/host/isp1760-hcd.h b/drivers/usb/host/isp1760-hcd.h
index 6931ef5..0d6023b 100644
--- a/drivers/usb/host/isp1760-hcd.h
+++ b/drivers/usb/host/isp1760-hcd.h
@@ -68,7 +68,7 @@ void deinit_kmem_cache(void);
 #define HC_INTERRUPT_REG	0x310
 
 #define HC_INTERRUPT_ENABLE	0x314
-#define INTERRUPT_ENABLE_MASK	(HC_INTL_INT | HC_ATL_INT | HC_EOT_INT)
+#define INTERRUPT_ENABLE_MASK	(HC_INTL_INT | HC_SOT_INT | HC_EOT_INT)
 
 #define HC_ISO_INT		(1 << 9)
 #define HC_ATL_INT		(1 << 8)