you need to cc spear-devel@list.st.com list for SPEAr patches.
TI ??
On 7 June 2013 11:33, Manjunath Goudar <manjunath.goudar@linaro.org> wrote:
> Separate the TI OHCI SPEAr host controller driver from ohci-hcd
In alphabetical order please. And please which ones of these are must
> host code so that it can be built as a separate driver module.
> This work is part of enabling multi-platform kernels on ARM.
>
> Signed-off-by: Manjunath Goudar <manjunath.goudar@linaro.org>
> Cc: Viresh Kumar <viresh.linux@gmail.com>
> Cc: Arnd Bergmann <arnd@arndb.de>
> Cc: Greg KH <greg@kroah.com>
> Cc: Alan Stern <stern@rowland.harvard.edu>
> Cc: linux-usb@vger.kernel.org
> ---
> drivers/usb/host/Kconfig | 8 +++
> drivers/usb/host/Makefile | 1 +
> drivers/usb/host/ohci-hcd.c | 22 +-----
> drivers/usb/host/ohci-spear.c | 149 ++++++++++++++++++-----------------------
> 4 files changed, 75 insertions(+), 105 deletions(-)
>
> diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig
> index f42db93..c347cb3 100644
> --- a/drivers/usb/host/Kconfig
> +++ b/drivers/usb/host/Kconfig
> @@ -403,6 +403,14 @@ config USB_OHCI_HCD_OMAP1
> ---help---
> Enables support for the OHCI controller on OMAP1/2 chips.
>
> +config USB_OHCI_HCD_SPEAR
> + tristate "Support for ST SPEAr on-chip OHCI USB controller"
> + depends on USB_OHCI_HCD && PLAT_SPEAR
> + default y
> + ---help---
> + Enables support for the on-chip OHCI controller on
> + ST SPEAr chips.
> +
> config USB_OHCI_HCD_OMAP3
> tristate "OHCI support for OMAP3 and later chips"
> depends on (ARCH_OMAP3 || ARCH_OMAP4)
> diff --git a/drivers/usb/host/Makefile b/drivers/usb/host/Makefile
> index ceb4e55..1e0d83e 100644
> --- a/drivers/usb/host/Makefile
> +++ b/drivers/usb/host/Makefile
> @@ -49,6 +49,7 @@ obj-$(CONFIG_USB_OHCI_HCD_PLATFORM) += ohci-platform.o
> obj-$(CONFIG_USB_OHCI_EXYNOS) += ohci-exynos.o
> obj-$(CONFIG_USB_OHCI_HCD_OMAP1) += ohci-omap.o
> obj-$(CONFIG_USB_OHCI_HCD_OMAP3) += ohci-omap3.o
> +obj-$(CONFIG_USB_OHCI_HCD_SPEAR) += ohci-spear.o
>
> obj-$(CONFIG_USB_UHCI_HCD) += uhci-hcd.o
> obj-$(CONFIG_USB_FHCI_HCD) += fhci.o
> diff --git a/drivers/usb/host/ohci-hcd.c b/drivers/usb/host/ohci-hcd.c
> index 8002bbe..27f0abe 100644
> --- a/drivers/usb/host/ohci-hcd.c
> +++ b/drivers/usb/host/ohci-hcd.c
> @@ -1208,11 +1208,6 @@ MODULE_LICENSE ("GPL");
> #define OF_PLATFORM_DRIVER ohci_hcd_ppc_of_driver
> #endif
>
> -#ifdef CONFIG_PLAT_SPEAR
> -#include "ohci-spear.c"
> -#define SPEAR_PLATFORM_DRIVER spear_ohci_hcd_driver
> -#endif
> -
> #ifdef CONFIG_PPC_PS3
> #include "ohci-ps3.c"
> #define PS3_SYSTEM_BUS_DRIVER ps3_ohci_driver
> @@ -1248,6 +1243,7 @@ MODULE_LICENSE ("GPL");
> !IS_ENABLED(CONFIG_USB_OHCI_EXYNOS) && \
> !IS_ENABLED(CONFIG_USB_OHCI_HCD_OMAP1) && \
> !IS_ENABLED(CONFIG_USB_OHCI_HCD_OMAP3) && \
> + !IS_ENABLED(CONFIG_USB_OHCI_HCD_SPEAR) && \
> !defined(PLATFORM_DRIVER) && \
> !defined(OF_PLATFORM_DRIVER) && \
> !defined(SA1111_DRIVER) && \
> @@ -1258,8 +1254,7 @@ MODULE_LICENSE ("GPL");
> !defined(EP93XX_PLATFORM_DRIVER) && \
> !defined(AT91_PLATFORM_DRIVER) && \
> !defined(NXP_PLATFORM_DRIVER) && \
> - !defined(DAVINCI_PLATFORM_DRIVER) && \
> - !defined(SPEAR_PLATFORM_DRIVER)
> + !defined(DAVINCI_PLATFORM_DRIVER)
> #error "missing bus glue for ohci-hcd"
> #endif
>
> @@ -1349,19 +1344,9 @@ static int __init ohci_hcd_mod_init(void)
> goto error_davinci;
> #endif
>
> -#ifdef SPEAR_PLATFORM_DRIVER
> - retval = platform_driver_register(&SPEAR_PLATFORM_DRIVER);
> - if (retval < 0)
> - goto error_spear;
> -#endif
> -
> return retval;
>
> /* Error path */
> -#ifdef SPEAR_PLATFORM_DRIVER
> - platform_driver_unregister(&SPEAR_PLATFORM_DRIVER);
> - error_spear:
> -#endif
> #ifdef DAVINCI_PLATFORM_DRIVER
> platform_driver_unregister(&DAVINCI_PLATFORM_DRIVER);
> error_davinci:
> @@ -1419,9 +1404,6 @@ module_init(ohci_hcd_mod_init);
>
> static void __exit ohci_hcd_mod_exit(void)
> {
> -#ifdef SPEAR_PLATFORM_DRIVER
> - platform_driver_unregister(&SPEAR_PLATFORM_DRIVER);
> -#endif
> #ifdef DAVINCI_PLATFORM_DRIVER
> platform_driver_unregister(&DAVINCI_PLATFORM_DRIVER);
> #endif
> diff --git a/drivers/usb/host/ohci-spear.c b/drivers/usb/host/ohci-spear.c
> index 6a7cb14..9e79d24 100644
> --- a/drivers/usb/host/ohci-spear.c
> +++ b/drivers/usb/host/ohci-spear.c
> @@ -11,94 +11,41 @@
> * warranty of any kind, whether express or implied.
> */
>
> -#include <linux/signal.h>
> -#include <linux/platform_device.h>
> +#include <linux/dma-mapping.h>
> #include <linux/clk.h>
> +#include <linux/io.h>
> +#include <linux/kernel.h>
> +#include <linux/module.h>
> #include <linux/of.h>
> +#include <linux/platform_device.h>
> +#include <linux/signal.h>
> +#include <linux/usb.h>
> +#include <linux/usb/hcd.h>
> +#include <linux/debugfs.h>
> +#include <linux/errno.h>
to have.
why rename this?>
> -struct spear_ohci {
> - struct ohci_hcd ohci;
> - struct clk *clk;
> -};
> -
> -#define to_spear_ohci(hcd) (struct spear_ohci *)hcd_to_ohci(hcd)
> -
> -static void spear_start_ohci(struct spear_ohci *ohci)
> -{
> - clk_prepare_enable(ohci->clk);
> -}
> -
> -static void spear_stop_ohci(struct spear_ohci *ohci)
> -{
> - clk_disable_unprepare(ohci->clk);
> -}
> -
> -static int ohci_spear_start(struct usb_hcd *hcd)
> -{
> - struct ohci_hcd *ohci = hcd_to_ohci(hcd);
> - int ret;
> -
> - ret = ohci_init(ohci);
> - if (ret < 0)
> - return ret;
> - ohci->regs = hcd->regs;
> -
> - ret = ohci_run(ohci);
> - if (ret < 0) {
> - dev_err(hcd->self.controller, "can't start\n");
> - ohci_stop(hcd);
> - return ret;
> - }
> -
> - create_debug_files(ohci);
> -
> -#ifdef DEBUG
> - ohci_dump(ohci, 1);
> -#endif
> - return 0;
> -}
> -
> -static const struct hc_driver ohci_spear_hc_driver = {
> - .description = hcd_name,
> - .product_desc = "SPEAr OHCI",
> - .hcd_priv_size = sizeof(struct spear_ohci),
> -
> - /* generic hardware linkage */
> - .irq = ohci_irq,
> - .flags = HCD_USB11 | HCD_MEMORY,
> -
> - /* basic lifecycle operations */
> - .start = ohci_spear_start,
> - .stop = ohci_stop,
> - .shutdown = ohci_shutdown,
> -#ifdef CONFIG_PM
> - .bus_suspend = ohci_bus_suspend,
> - .bus_resume = ohci_bus_resume,
> -#endif
> -
> - /* managing i/o requests and associated device resources */
> - .urb_enqueue = ohci_urb_enqueue,
> - .urb_dequeue = ohci_urb_dequeue,
> - .endpoint_disable = ohci_endpoint_disable,
>
> - /* scheduling support */
> - .get_frame_number = ohci_get_frame,
> +#include "ohci.h"
>
> - /* root hub support */
> - .hub_status_data = ohci_hub_status_data,
> - .hub_control = ohci_hub_control,
> +#define DRIVER_DESC "OHCI SPEAr driver"
>
> - .start_port_reset = ohci_start_port_reset,
> +static const char hcd_name[] = "SPEAr-ohci";
> +struct spear_ohci {
> + struct clk *clk;
> };
>
> +#define to_spear_ohci(hcd) (struct spear_ohci *)(hcd_to_ohci(hcd)->priv)
> +
> +static struct hc_driver __read_mostly ohci_spear_hc_driver;
> static u64 spear_ohci_dma_mask = DMA_BIT_MASK(32);
>
> static int spear_ohci_hcd_drv_probe(struct platform_device *pdev)
> {
> const struct hc_driver *driver = &ohci_spear_hc_driver;
> + struct ohci_hcd *ohci;
> struct usb_hcd *hcd = NULL;
> struct clk *usbh_clk;
> - struct spear_ohci *ohci_p;
> + struct spear_ohci *sohci_p;
I can't really review it functionally.> struct resource *res;
> int retval, irq;
>
> @@ -151,16 +98,24 @@ static int spear_ohci_hcd_drv_probe(struct platform_device *pdev)
> goto err_put_hcd;
> }
>
> - ohci_p = (struct spear_ohci *)hcd_to_ohci(hcd);
> - ohci_p->clk = usbh_clk;
> - spear_start_ohci(ohci_p);
> - ohci_hcd_init(hcd_to_ohci(hcd));
> + sohci_p = to_spear_ohci(hcd);
> + sohci_p->clk = usbh_clk;
> + hcd_to_ohci(hcd)->regs = hcd->regs;
> +
> + ohci_setup(hcd);
> + clk_prepare_enable(sohci_p->clk);
> +
> + ohci = hcd_to_ohci(hcd);
> +
> +#ifdef DEBUG
> + ohci_dump(ohci, 1);
> +#endif
>
> retval = usb_add_hcd(hcd, platform_get_irq(pdev, 0), 0);
> if (retval == 0)
> return retval;
>
> - spear_stop_ohci(ohci_p);
> + clk_disable_unprepare(sohci_p->clk);
> err_put_hcd:
> usb_put_hcd(hcd);
> fail:
> @@ -172,11 +127,11 @@ fail:
> static int spear_ohci_hcd_drv_remove(struct platform_device *pdev)
> {
> struct usb_hcd *hcd = platform_get_drvdata(pdev);
> - struct spear_ohci *ohci_p = to_spear_ohci(hcd);
> + struct spear_ohci *sohci_p = to_spear_ohci(hcd);
>
> usb_remove_hcd(hcd);
> - if (ohci_p->clk)
> - spear_stop_ohci(ohci_p);
> + if (sohci_p->clk)
> + clk_disable_unprepare(sohci_p->clk);
>
> usb_put_hcd(hcd);
> return 0;
> @@ -188,13 +143,13 @@ static int spear_ohci_hcd_drv_suspend(struct platform_device *dev,
> {
> struct usb_hcd *hcd = platform_get_drvdata(dev);
> struct ohci_hcd *ohci = hcd_to_ohci(hcd);
> - struct spear_ohci *ohci_p = to_spear_ohci(hcd);
> + struct spear_ohci *sohci_p = to_spear_ohci(hcd);
>
> if (time_before(jiffies, ohci->next_statechange))
> msleep(5);
> ohci->next_statechange = jiffies;
>
> - spear_stop_ohci(ohci_p);
> + clk_disable_unprepare(sohci_p->clk);
> return 0;
> }
>
> @@ -202,13 +157,13 @@ static int spear_ohci_hcd_drv_resume(struct platform_device *dev)
> {
> struct usb_hcd *hcd = platform_get_drvdata(dev);
> struct ohci_hcd *ohci = hcd_to_ohci(hcd);
> - struct spear_ohci *ohci_p = to_spear_ohci(hcd);
> + struct spear_ohci *sohci_p = to_spear_ohci(hcd);
>
> if (time_before(jiffies, ohci->next_statechange))
> msleep(5);
> ohci->next_statechange = jiffies;
>
> - spear_start_ohci(ohci_p);
> + clk_prepare_enable(sohci_p->clk);
> ohci_resume(hcd, false);
> return 0;
> }
> @@ -234,4 +189,28 @@ static struct platform_driver spear_ohci_hcd_driver = {
> },
> };
>
> +static const struct ohci_driver_overrides spear_overrides __initconst = {
> + .extra_priv_size = sizeof(struct spear_ohci),
> +};
> +static int __init ohci_spear_init(void)
> +{
> + if (usb_disabled())
> + return -ENODEV;
> +
> + pr_info("%s: " DRIVER_DESC "\n", hcd_name);
> +
> + ohci_init_driver(&ohci_spear_hc_driver, &spear_overrides);
> + return platform_driver_register(&spear_ohci_hcd_driver);
> +}
> +module_init(ohci_spear_init);
> +
> +static void __exit ohci_spear_cleanup(void)
> +{
> + platform_driver_unregister(&spear_ohci_hcd_driver);
> +}
> +module_exit(ohci_spear_cleanup);
> +
> +MODULE_DESCRIPTION(DRIVER_DESC);
> +MODULE_AUTHOR("Deepak Sikri");
> +MODULE_LICENSE("GPL v2");
> MODULE_ALIAS("platform:spear-ohci");
@Deepak: Can you?