Hi,
[snip]
On Fri, Aug 10, 2012 at 1:20 PM, hongbo.zhang <hongbo.zhang@linaro.org> wrote:
> From: "hongbo.zhang" <hongbo.zhang@stericsson.com>
>
> This diver is based on the thermal management framework in thermal_sys.c.
> A thermal zone device is created with the trip points to which cooling
> devices can be binded, the current cooling device is cpufreq, e.g. CPU
> frequency is clipped down to cool the CPU, and other cooling devices can
> be added and binded to the trip points dynamically.
> The platform specific PRCMU interrupts are used to active thermal update
> when trip points are reached.
>
> Signed-off-by: hongbo.zhang <hongbo.zhang@linaro.com>
> ---
> arch/arm/boot/dts/db8500.dtsi | 11 +
> arch/arm/configs/u8500_defconfig | 4 +
> arch/arm/mach-ux500/board-mop500.c | 73 ++++
> drivers/thermal/Kconfig | 20 +
> drivers/thermal/Makefile | 4 +-
> drivers/thermal/db8500_cpufreq_cooling.c | 175 +++++++++
> drivers/thermal/db8500_thermal.c | 511 ++++++++++++++++++++++++++
> include/linux/platform_data/db8500_thermal.h | 39 ++
> 8 files changed, 836 insertions(+), 1 deletion(-)
> create mode 100644 drivers/thermal/db8500_cpufreq_cooling.c
> create mode 100644 drivers/thermal/db8500_thermal.c
> create mode 100644 include/linux/platform_data/db8500_thermal.h
DB8500 should be uppercase
> diff --git a/drivers/thermal/Kconfig b/drivers/thermal/Kconfig
> index ace6078..37bd484 100644
> --- a/drivers/thermal/Kconfig
> +++ b/drivers/thermal/Kconfig
> @@ -30,6 +30,26 @@ config CPU_THERMAL
> and not the ACPI interface.
> If you want this support, you should say Y or M here.
>
> +config DB8500_THERMAL
> + bool "db8500 thermal management"
s/binded/bound
> + depends on THERMAL
> + default y
> + help
> + Adds DB8500 thermal management implementation according to the thermal
> + management framework. A thermal zone with several trip points will be
> + created. Cooling devices can be binded to the trip points to cool this
Uppercase
> + thermal zone if trip points reached.
> +
> +config DB8500_CPUFREQ_COOLING
> + tristate "db8500 cpufreq cooling"
s/binded/bound (twice)
> + depends on CPU_THERMAL
> + default y
> + help
> + Adds DB8500 cpufreq cooling devices, and these cooling devices can be
> + binded to thermal zone trip points. When a trip point reached, the
> + binded cpufreq cooling device turns active to set CPU frequency low to
unneeded () in the for condition
> + cool down the CPU.
> +
> config SPEAR_THERMAL
> bool "SPEAr thermal sensor driver"
> depends on THERMAL
> diff --git a/drivers/thermal/Makefile b/drivers/thermal/Makefile
> index 30c456c..d146456 100644
> --- a/drivers/thermal/Makefile
> +++ b/drivers/thermal/Makefile
> @@ -3,5 +3,7 @@
> #
>
> obj-$(CONFIG_THERMAL) += thermal_sys.o
> -obj-$(CONFIG_CPU_THERMAL) += cpu_cooling.o
> +obj-$(CONFIG_CPU_THERMAL) += cpu_cooling.o
> +obj-$(CONFIG_DB8500_THERMAL) += db8500_thermal.o
> +obj-$(CONFIG_DB8500_CPUFREQ_COOLING) +=db8500_cpufreq_cooling.o
> obj-$(CONFIG_SPEAR_THERMAL) += spear_thermal.o
> diff --git a/drivers/thermal/db8500_cpufreq_cooling.c b/drivers/thermal/db8500_cpufreq_cooling.c
> new file mode 100644
> index 0000000..973d1ad
> --- /dev/null
> +++ b/drivers/thermal/db8500_cpufreq_cooling.c
> @@ -0,0 +1,175 @@
> +/*
> + * db8500_cpufreq_cooling.c - db8500 cpufreq works as cooling device.
> + *
> + * Copyright (C) 2012 ST-Ericsson
> + * Copyright (C) 2012 Linaro Ltd.
> + *
> + * Author: Hongbo Zhang <hognbo.zhang@stericsson.com>
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License as published by
> + * the Free Software Foundation; either version 2 of the License, or
> + * (at your option) any later version.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + *
> + */
> +
> +#include <linux/slab.h>
> +#include <linux/module.h>
> +#include <linux/platform_device.h>
> +#include <linux/cpufreq.h>
> +#include <linux/cpu_cooling.h>
> +#include <linux/err.h>
> +
> +static LIST_HEAD(db8500_cpufreq_cdev_list);
> +
> +struct db8500_cpufreq_cdev {
> + struct thermal_cooling_device *cdev;
> + struct list_head node;
> +};
> +
> +/* Local function to create cpufreq clip table */
> +static int cpufreq_table_create(struct platform_device *pdev,
> + struct freq_clip_table **freq_tab, int *num_freq)
> +{
> + struct cpufreq_frequency_table *table;
> + struct freq_clip_table *clip;
> + unsigned int temp;
> + int i, j, count = 0;
> +
> + table = cpufreq_frequency_get_table(0);
> + if (!table)
> + return -ENODATA;
> +
> + /* Check number of frequencies */
> + for (i = 0; (table[i].frequency != CPUFREQ_TABLE_END); i++) {
You are counting the frequencies twice: there is no need to re-set
> + if (table[i].frequency == CPUFREQ_ENTRY_INVALID)
> + continue;
> + count++;
> + }
> +
> + clip = devm_kzalloc(&pdev->dev,
> + sizeof(struct freq_clip_table) * count, GFP_KERNEL);
> +
> + /* Save frequencies */
> + count = 0;
> + for (i = 0; (table[i].frequency != CPUFREQ_TABLE_END); i++) {
> + if (table[i].frequency == CPUFREQ_ENTRY_INVALID)
> + continue;
> + clip[count].freq_clip_max = table[i].frequency;
> + count++;
> + }
count to 0 and re-increment it in the for loop.
Also the unneded parentheses in the for condition should be removed
here as well.
s/regestered/registered
> +
> + /* Descending order frequencies */
> + for (i = 0; i <= count - 2; i++)
> + for (j = i + 1; j <= count - 1; j++)
> + if (clip[i].freq_clip_max < clip[j].freq_clip_max) {
> + temp = clip[i].freq_clip_max;
> + clip[i].freq_clip_max = clip[j].freq_clip_max;
> + clip[j].freq_clip_max = temp;
> + }
> +
> + for (i = 0; i < count; i++) {
> + clip[i].mask_val = cpu_present_mask;
> + pr_info("db8500_clip_tab.%d: %d\n", i, clip[i].freq_clip_max);
> + }
> +
> + *freq_tab = clip;
> + *num_freq = count;
> +
> + return 0;
> +}
> +
> +static int __devinit db8500_cpufreq_cooling_probe(struct platform_device *pdev)
> +{
> + struct freq_clip_table *freq_tab = NULL;
> + struct db8500_cpufreq_cdev *cooling_devs;
> + int i, ret, num_freq = 0;
> +
> + if (cpufreq_table_create(pdev, &freq_tab, &num_freq))
> + return -ENODATA;
> +
> + if (unlikely(!freq_tab || !num_freq))
> + return -ENODATA;
> +
> + /* Create one cooling device for each clip frequency */
> + for (i = 0; i < num_freq; i++) {
> + cooling_devs = devm_kzalloc(&pdev->dev,
> + sizeof(struct db8500_cpufreq_cdev), GFP_KERNEL);
> + if (!cooling_devs) {
> + ret = -ENOMEM;
> + goto exit;
> + }
> +
> + cooling_devs->cdev = cpufreq_cooling_register(&freq_tab[i], 1);
> +
> + if (IS_ERR(cooling_devs->cdev)) {
> + pr_err("Failed to register cpufreq cooling device\n");
> + ret = PTR_ERR(cooling_devs->cdev);
> + goto exit;
> + }
> +
> + list_add_tail(&cooling_devs->node, &db8500_cpufreq_cdev_list);
> + pr_info("Cooling device regestered: %s\n",
DB8500 should be uppercase
> + cooling_devs->cdev->type);
> + }
> +
> + return 0;
> +
> +exit:
> + list_for_each_entry(cooling_devs, &db8500_cpufreq_cdev_list, node)
> + cpufreq_cooling_unregister(cooling_devs->cdev);
> +
> + return ret;
> +}
> +
> +static int __devexit db8500_cpufreq_cooling_remove(struct platform_device *pdev)
> +{
> + struct db8500_cpufreq_cdev *cooling_devs;
> +
> + list_for_each_entry(cooling_devs, &db8500_cpufreq_cdev_list, node)
> + cpufreq_cooling_unregister(cooling_devs->cdev);
> +
> + return 0;
> +}
> +
> +#ifdef CONFIG_OF
> +static const struct of_device_id db8500_cpufreq_cooling_match[] = {
> + { .compatible = "stericsson,db8500-cpufreq-cooling" },
> + {},
> +};
> +#else
> +#define db8500_cpufreq_cooling_match NULL
> +#endif
> +
> +static struct platform_driver db8500_cpufreq_cooling_driver = {
> + .driver = {
> + .owner = THIS_MODULE,
> + .name = "db8500-cpufreq-cooling",
> + .of_match_table = db8500_cpufreq_cooling_match,
> + },
> + .probe = db8500_cpufreq_cooling_probe,
> + .remove = __devexit_p(db8500_cpufreq_cooling_remove),
> +};
> +
> +static int __init db8500_cpufreq_cooling_init(void)
> +{
> + return platform_driver_register(&db8500_cpufreq_cooling_driver);
> +}
> +
> +static void __exit db8500_cpufreq_cooling_exit(void)
> +{
> + platform_driver_unregister(&db8500_cpufreq_cooling_driver);
> +}
> +
> +/* Should be later than db8500_cpufreq_register */
> +late_initcall(db8500_cpufreq_cooling_init);
> +module_exit(db8500_cpufreq_cooling_exit);
> +
> +MODULE_AUTHOR("Hongbo Zhang <hongbo.zhang@stericsson.com>");
> +MODULE_DESCRIPTION("db8500 cpufreq cooling driver");
s/binded/bound
> +MODULE_LICENSE("GPL");
> diff --git a/drivers/thermal/db8500_thermal.c b/drivers/thermal/db8500_thermal.c
> new file mode 100644
> index 0000000..920df6a
> --- /dev/null
> +++ b/drivers/thermal/db8500_thermal.c
> @@ -0,0 +1,511 @@
> +/*
> + * db8500_thermal.c - db8500 Thermal Management Implementation
> + *
> + * Copyright (C) 2012 ST-Ericsson
> + * Copyright (C) 2012 Linaro Ltd.
> + *
> + * Author: Hongbo Zhang <hognbo.zhang@stericsson.com>
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License as published by
> + * the Free Software Foundation; either version 2 of the License, or
> + * (at your option) any later version.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + *
> + */
> +
> +#include <linux/module.h>
> +#include <linux/slab.h>
> +#include <linux/interrupt.h>
> +#include <linux/platform_device.h>
> +#include <linux/thermal.h>
> +#include <linux/cpu_cooling.h>
> +#include <linux/mfd/dbx500-prcmu.h>
> +#include <linux/platform_data/db8500_thermal.h>
> +
> +#define PRCMU_DEFAULT_MEASURE_TIME 0xFFF
> +#define PRCMU_DEFAULT_LOW_TEMP 0
> +
> +struct db8500_thermal_zone {
> + struct thermal_zone_device *therm_dev;
> + struct mutex th_lock;
> + struct platform_device *thsens_pdev;
> + struct work_struct therm_work;
> + struct db8500_thsens_platform_data *trip_tab;
> + enum thermal_device_mode mode;
> + unsigned long cur_temp_pseudo;
> + unsigned int cur_index;
> + int low_irq;
> + int high_irq;
> +};
> +
> +/* Bind callback functions for thermal zone */
> +static int db8500_cdev_bind(struct thermal_zone_device *thermal,
> + struct thermal_cooling_device *cdev)
> +{
> + struct db8500_thermal_zone *pzone;
> + struct db8500_thsens_platform_data *ptrips;
> + char *cdev_name;
> + int i, j, ret;
> +
> + pzone = (struct db8500_thermal_zone *)thermal->devdata;
> + ptrips = pzone->trip_tab;
> +
> + if (!cdev->type)
> + return -EINVAL;
> +
> + ret = -ENODEV;
> + for (i = 0; i < ptrips->num_trips; i++)
> + for (j = 0; j < COOLING_DEV_MAX; j++) {
> + cdev_name = ptrips->trip_points[i].cooling_dev_name[j];
> + if (!cdev_name)
> + continue;
> +
> + if (strcmp(cdev_name, cdev->type))
> + continue;
> +
> + ret = thermal_zone_bind_cooling_device(
> + thermal, i, cdev);
> + if (ret)
> + pr_err("Error binding cooling device.\n");
> + else
> + pr_info("Cdev %s binded.\n", cdev->type);
s/unbinded/unbound
> + }
> +
> + /* Force an update since polling mode is not used */
> + schedule_work(&pzone->therm_work);
> +
> + return ret;
> +}
> +
> +/* Unbind callback functions for thermal zone */
> +static int db8500_cdev_unbind(struct thermal_zone_device *thermal,
> + struct thermal_cooling_device *cdev)
> +{
> + struct db8500_thermal_zone *pzone;
> + struct db8500_thsens_platform_data *ptrips;
> + char *cdev_name;
> + int i, j, ret;
> +
> + pzone = (struct db8500_thermal_zone *)thermal->devdata;
> + ptrips = pzone->trip_tab;
> +
> + if (!cdev->type)
> + return -EINVAL;
> +
> + ret = -ENODEV;
> + for (i = 0; i < ptrips->num_trips; i++)
> + for (j = 0; j < COOLING_DEV_MAX; j++) {
> + cdev_name = ptrips->trip_points[i].cooling_dev_name[j];
> + if (!cdev_name)
> + continue;
> +
> + if (strcmp(cdev_name, cdev->type))
> + continue;
> +
> + /* Invalidate the cooling device before unbinding it */
> + if (cdev->ops->set_cur_state)
> + cdev->ops->set_cur_state(cdev, 0);
> +
> + ret = thermal_zone_unbind_cooling_device(
> + thermal, i, cdev);
> + if (ret)
> + pr_err("Error unbinding cooling device.\n");
> + else
> + pr_info("Cdev %s unbinded.\n", cdev->type);
There shouldn't be leading spaces before ;
> + }
> +
> + return ret;
> +}
> +
> +/* Get temperature callback functions for thermal zone */
> +static int db8500_sys_get_temp(struct thermal_zone_device *thermal,
> + unsigned long *temp)
> +{
> + struct db8500_thermal_zone *pzone;
> +
> + pzone = (struct db8500_thermal_zone *)thermal->devdata;
> +
> + /* TODO: There is no PRCMU interface to get temperature data currently,
> + so a pseudo temperature is returned , it works for the thermal framework
> + and this will be fixed when the PRCMU interface is available */
> + *temp = pzone->cur_temp_pseudo;
> +
> + return 0;
> +}
> +
> +/* Get mode callback functions for thermal zone */
> +static int db8500_sys_get_mode(struct thermal_zone_device *thermal,
> + enum thermal_device_mode *mode)
> +{
> + struct db8500_thermal_zone *pzone;
> + pzone = (struct db8500_thermal_zone *)thermal->devdata;
> +
> + mutex_lock(&pzone->th_lock);
> + *mode = pzone->mode;
> + mutex_unlock(&pzone->th_lock);
> +
> + return 0;
> +}
> +
> +/* Set mode callback functions for thermal zone */
> +static int db8500_sys_set_mode(struct thermal_zone_device *thermal,
> + enum thermal_device_mode mode)
> +{
> + struct db8500_thermal_zone *pzone;
> + struct thermal_zone_device *pthdev;
> + struct thermal_cooling_device_instance *instance;
> + struct thermal_cooling_device *cdev;
> +
> + pzone = (struct db8500_thermal_zone *)thermal->devdata;
> + pthdev = pzone->therm_dev;
> +
> + if (!pthdev) {
> + pr_err("Thermal zone not registered.\n");
> + return 0;
> + }
> +
> + mutex_lock(&pzone->th_lock);
> +
> + if (mode == THERMAL_DEVICE_ENABLED && pzone->mode != mode) {
> + pzone->mode = mode;
> + schedule_work(&pzone->therm_work);
> + }
> +
> + if (mode == THERMAL_DEVICE_DISABLED && pzone->mode != mode) {
> + pzone->mode = mode;
> +
> + mutex_lock(&thermal->lock);
> + list_for_each_entry(instance,
> + &thermal->cooling_devices, node) {
> + cdev = instance->cdev;
> + if (cdev->ops->set_cur_state)
> + cdev->ops->set_cur_state(cdev, 0);
> + }
> + mutex_unlock(&thermal->lock);
> + }
> +
> + mutex_unlock(&pzone->th_lock);
> +
> + return 0;
> +}
> +
> +/* Get trip type callback function for thermal zone */
> +static int db8500_sys_get_trip_type(struct thermal_zone_device *thermal,
> + int trip, enum thermal_trip_type *type)
> +{
> + struct db8500_thermal_zone *pzone;
> + struct db8500_thsens_platform_data *ptrips;
> +
> + pzone = (struct db8500_thermal_zone *)thermal->devdata;
> + ptrips = pzone->trip_tab;
> +
> + if (trip >= ptrips->num_trips)
> + return -EINVAL;
> +
> + *type = ptrips->trip_points[trip].type;
> +
> + return 0;
> +}
> +
> +/* Get trip temperature callback function for thermal zone */
> +static int db8500_sys_get_trip_temp(struct thermal_zone_device *thermal,
> + int trip, unsigned long *temp)
> +{
> + struct db8500_thermal_zone *pzone;
> + struct db8500_thsens_platform_data *ptrips;
> +
> + pzone = (struct db8500_thermal_zone *)thermal->devdata;
> + ptrips = pzone->trip_tab;
> +
> + if (trip >= ptrips->num_trips)
> + return -EINVAL;
> +
> + *temp = ptrips->trip_points[trip].temp;
> +
> + return 0;
> +}
> +
> +/* Get critical temperature callback function for thermal zone */
> +static int db8500_sys_get_crit_temp(struct thermal_zone_device *thermal,
> + unsigned long *temp)
> +{
> + struct db8500_thermal_zone *pzone;
> + struct db8500_thsens_platform_data *ptrips;
> + int i;
> +
> + pzone = (struct db8500_thermal_zone *)thermal->devdata;
> + ptrips = pzone->trip_tab;
> +
> + for (i = (ptrips->num_trips - 1) ; i > 0 ; i--) {
This seems to me a little bit too verbose...
> + if (ptrips->trip_points[i].type == THERMAL_TRIP_CRITICAL) {
> + *temp = ptrips->trip_points[i].temp;
> + return 0;
> + }
> + }
> +
> + return -EINVAL;
> +}
> +
> +static struct thermal_zone_device_ops thdev_ops = {
> + .bind = db8500_cdev_bind,
> + .unbind = db8500_cdev_unbind,
> + .get_temp = db8500_sys_get_temp,
> + .get_mode = db8500_sys_get_mode,
> + .set_mode = db8500_sys_set_mode,
> + .get_trip_type = db8500_sys_get_trip_type,
> + .get_trip_temp = db8500_sys_get_trip_temp,
> + .get_crit_temp = db8500_sys_get_crit_temp,
> +};
> +
> +static irqreturn_t prcmu_low_irq_handler(int irq, void *irq_data)
> +{
> + struct db8500_thermal_zone *pzone = irq_data;
> + struct db8500_thsens_platform_data *ptrips;
> + unsigned long next_low, next_high;
> + unsigned int idx;
> +
> + ptrips = pzone->trip_tab;
> + idx = pzone->cur_index;
> + if (unlikely(idx == 0))
> + /* Meaningless for thermal management, ignoring it */
> + return IRQ_HANDLED;
> +
> + if (idx == 1) {
> + next_high = ptrips->trip_points[0].temp;
> + next_low = PRCMU_DEFAULT_LOW_TEMP;
> + } else {
> + next_high = ptrips->trip_points[idx-1].temp;
> + next_low = ptrips->trip_points[idx-2].temp;
> + }
> +
> + pzone->cur_index -= 1;
> + pzone->cur_temp_pseudo = (next_high + next_low)/2;
> +
> + prcmu_stop_temp_sense();
> + prcmu_config_hotmon((u8)(next_low/1000), (u8)(next_high/1000));
> + prcmu_start_temp_sense(PRCMU_DEFAULT_MEASURE_TIME);
> +
> + pr_debug("PRCMU set max %ld, set min %ld\n", next_high, next_low);
> +
> + schedule_work(&pzone->therm_work);
> +
> + return IRQ_HANDLED;
> +}
> +
> +static irqreturn_t prcmu_high_irq_handler(int irq, void *irq_data)
> +{
> + struct db8500_thermal_zone *pzone = irq_data;
> + struct db8500_thsens_platform_data *ptrips;
> + unsigned long next_low, next_high;
> + unsigned int idx;
> +
> + ptrips = pzone->trip_tab;
> + idx = pzone->cur_index;
> +
> + if (idx < ptrips->num_trips - 1) {
> + next_high = ptrips->trip_points[idx+1].temp;
> + next_low = ptrips->trip_points[idx].temp;
> +
> + pzone->cur_index += 1;
> + pzone->cur_temp_pseudo = (next_high + next_low)/2;
> +
> + prcmu_stop_temp_sense();
> + prcmu_config_hotmon((u8)(next_low/1000), (u8)(next_high/1000));
> + prcmu_start_temp_sense(PRCMU_DEFAULT_MEASURE_TIME);
> +
> + pr_debug("PRCMU set max %ld, min %ld\n", next_high, next_low);
> + }
> +
> + if (idx == ptrips->num_trips - 1)
> + pzone->cur_temp_pseudo = ptrips->trip_points[idx].temp + 1;
> +
> + schedule_work(&pzone->therm_work);
> +
> + return IRQ_HANDLED;
> +}
> +
> +static void db8500_thermal_work(struct work_struct *work)
> +{
> + enum thermal_device_mode cur_mode;
> + struct db8500_thermal_zone *pzone;
> +
> + pzone = container_of(work, struct db8500_thermal_zone, therm_work);
> +
> + mutex_lock(&pzone->th_lock);
> + cur_mode = pzone->mode;
> + mutex_unlock(&pzone->th_lock);
> +
> + if (cur_mode == THERMAL_DEVICE_DISABLED) {
> + pr_warn("Warning: thermal function disabled.\n");
> + return;
> + }
> +
> + thermal_zone_device_update(pzone->therm_dev);
> + pr_debug("db8500_thermal_work finished.\n");
> +}
> +
> +static int __devinit db8500_thermal_probe(struct platform_device *pdev)
> +{
> + struct db8500_thermal_zone *pzone = NULL;
> + struct db8500_thsens_platform_data *ptrips;
> + int low_irq, high_irq, ret = 0;
> + unsigned long dft_low, dft_high;
> +
> + pr_info("Function db8500_thermal_probe.\n");
DB8500 uppercase
> +
> + pzone = devm_kzalloc(&pdev->dev,
> + sizeof(struct db8500_thermal_zone), GFP_KERNEL);
> + if (!pzone)
> + return -ENOMEM;
> +
> + pzone->thsens_pdev = pdev;
> +
> + low_irq = platform_get_irq_byname(pdev, "IRQ_HOTMON_LOW");
> + if (low_irq < 0) {
> + pr_err("Get IRQ_HOTMON_LOW failed.\n");
> + return low_irq;
> + }
> +
> + ret = devm_request_threaded_irq(&pdev->dev, low_irq, NULL,
> + prcmu_low_irq_handler,
> + IRQF_NO_SUSPEND | IRQF_ONESHOT, "dbx500_temp_low", pzone);
> + if (ret < 0) {
> + pr_err("Failed to allocate temp low irq.\n");
> + return ret;
> + }
> +
> + high_irq = platform_get_irq_byname(pdev, "IRQ_HOTMON_HIGH");
> + if (high_irq < 0) {
> + pr_err("Get IRQ_HOTMON_HIGH failed.\n");
> + return high_irq;
> + }
> +
> + ret = devm_request_threaded_irq(&pdev->dev, high_irq, NULL,
> + prcmu_high_irq_handler,
> + IRQF_NO_SUSPEND | IRQF_ONESHOT, "dbx500_temp_high", pzone);
> + if (ret < 0) {
> + pr_err("Failed to allocate temp high irq.\n");
> + return ret;
> + }
> +
> + pzone->low_irq = low_irq;
> + pzone->high_irq = high_irq;
> +
> + pzone->mode = THERMAL_DEVICE_DISABLED;
> +
> + mutex_init(&pzone->th_lock);
> +
> + INIT_WORK(&pzone->therm_work, db8500_thermal_work);
> +
> + ptrips = pdev->dev.platform_data;
> + pzone->trip_tab = ptrips;
> +
> + pzone->therm_dev = thermal_zone_device_register("db8500_thermal_zone",
> + ptrips->num_trips, 0, pzone, &thdev_ops, 0, 0, 0, 0);
> +
> + if (IS_ERR(pzone->therm_dev)) {
> + pr_err("Failed to register thermal zone device\n");
> + return PTR_ERR(pzone->therm_dev);
> + }
> +
> + dft_low = PRCMU_DEFAULT_LOW_TEMP;
> + dft_high = ptrips->trip_points[0].temp;
> +
> + prcmu_stop_temp_sense();
> + prcmu_config_hotmon((u8)(dft_low/1000), (u8)(dft_high/1000));
> + prcmu_start_temp_sense(PRCMU_DEFAULT_MEASURE_TIME);
> +
> + pzone->cur_index = 0;
> + pzone->cur_temp_pseudo = (dft_low + dft_high)/2;
> +
> + pzone->mode = THERMAL_DEVICE_ENABLED;
> +
> + platform_set_drvdata(pdev, pzone);
> +
> + return 0;
> +}
> +
> +static int __devexit db8500_thermal_remove(struct platform_device *pdev)
> +{
> + struct db8500_thermal_zone *pzone;
> + pzone = platform_get_drvdata(pdev);
> +
> + cancel_work_sync(&pzone->therm_work);
> +
> + if (pzone->therm_dev)
> + thermal_zone_device_unregister(pzone->therm_dev);
> +
> + return 0;
> +}
> +
> +static int db8500_thermal_suspend(struct platform_device *pdev,
> + pm_message_t state)
> +{
> + struct db8500_thermal_zone *pzone;
> + pzone = platform_get_drvdata(pdev);
> +
> + flush_work_sync(&pzone->therm_work);
> + prcmu_stop_temp_sense();
> +
> + return 0;
> +}
> +
> +static int db8500_thermal_resume(struct platform_device *pdev)
> +{
> + struct db8500_thermal_zone *pzone;
> + struct db8500_thsens_platform_data *ptrips;
> + unsigned long dft_low, dft_high;
> +
> + pzone = platform_get_drvdata(pdev);
> + ptrips = pzone->trip_tab;
> + dft_low = PRCMU_DEFAULT_LOW_TEMP;
> + dft_high = ptrips->trip_points[0].temp;
> +
> + prcmu_config_hotmon((u8)(dft_low/1000), (u8)(dft_high/1000));
> + prcmu_start_temp_sense(PRCMU_DEFAULT_MEASURE_TIME);
> +
> + return 0;
> +}
> +
> +#ifdef CONFIG_OF
> +static const struct of_device_id db8500_thermal_match[] = {
> + { .compatible = "stericsson,db8500-thermal" },
> + {},
> +};
> +#else
> +#define db8500_thermal_match NULL
> +#endif
> +
> +static struct platform_driver db8500_thermal_driver = {
> + .driver = {
> + .owner = THIS_MODULE,
> + .name = "db8500-thermal",
> + .of_match_table = db8500_thermal_match,
> + },
> + .probe = db8500_thermal_probe,
> + .suspend = db8500_thermal_suspend,
> + .resume = db8500_thermal_resume,
> + .remove = __devexit_p(db8500_thermal_remove),
> +};
> +
> +static int __init db8500_thermal_init(void)
> +{
> + return platform_driver_register(&db8500_thermal_driver);
> +}
> +
> +static void __exit db8500_thermal_exit(void)
> +{
> + platform_driver_unregister(&db8500_thermal_driver);
> +}
> +
> +module_init(db8500_thermal_init);
> +module_exit(db8500_thermal_exit);
> +
> +MODULE_AUTHOR("Hongbo Zhang <hongbo.zhang@stericsson.com>");
> +MODULE_DESCRIPTION("db8500 thermal driver");
Regards,
Francesco