Hi all,
Sorry for the wide distribution, but I've got a rather curious problem.
I'm trying to get a Snowball V11 PDK working in the validation lab, and the only way to get it to boot on power-on is to power it over USB and control the power through a USB power adaptor. While this works admirably, the problem is that when I try to soft-reboot I get the usual:
Broadcast message from root@master
(/dev/ttyAMA2) at 15:48 ...
The system is going down for reboot NOW!
* Asking all remaining processes to terminate... [ OK ]
* All processes ended within 1 seconds.... [ OK ]
* Deconfiguring network interfaces... [ OK ]
* Deactivating swap... [ OK ]
umount: /run/lock: not mounted
* Will now restart
[ 1279.346801] Restarting system.
and then nothing. It just hangs and never comes back until I power cycle it.
BTW: Sometimes I get the whole of the "Restarting system" message, sometimes just half of it.
Has anybody any idea why this might be the case and, if so, what I can do about it?
Thanks
Dave
Dave Pigott
Validation Engineer
T: +44 1223 45 00 24 | M +44 7940 45 93 44