Anyone with a VE board ever encounter something like this?
---------- Forwarded message ----------
From: Bibhuti Panigrahi <bibhuti.panigrahi@linaro.org>
Date: Tue, Mar 11, 2014 at 5:14 AM
Subject: Issue while booting up VE board
To: Tom Gall <tom.gall@linaro.org>
Hi Tom,
I am finding below issues while booting the Versatile Express board.
The board boots and u-boot prompt comes but after that it gets powered
down because of exceeding power limit (seems to be some PMIC issue).
Please find the detailed log below:
Cmd>
ARM V2M Boot loader v1.1.2
HBI0190 build 2199
ARM V2M Firmware v3.1.1
Build Date: Aug 20 2012
Date: Wed 13 Sep 2006
Time: 05:38:05
Cmd>
Powering up system...
Daughterboard fitted to site 1.
Switching on ATXPSU...
ATX3V3: ON
VIOset: 1.8V
WARNING: PSU 1V0 : 0.79V (21% error)
ERROR: PSU 1V0 outside limit, switching off...
Powering down, switching on UART0 bypass.
Powering down...
Disabling debug USB.
Switching off ATX PSU.
Board powered down, use REBOOT to restart
Cmd>
Please let me know if you have any pointer to this.
Regards,
Bibhuti
--
Regards,
Tom
"Where's the kaboom!? There was supposed to be an earth-shattering
kaboom!" Marvin Martian
Tech Lead, Graphics Working Group | Linaro.org │ Open source software
for ARM SoCs
w) tom.gall att linaro.org
h) tom_gall att mac.com
_______________________________________________
linaro-dev mailing list
linaro-dev@lists.linaro.org
http://lists.linaro.org/mailman/listinfo/linaro-dev