On 22 November 2010 19:22, Dave Martin <dave.martin@linaro.org> wrote:

On Sun, Nov 21, 2010 at 10:21 AM, Ira Rosen <ira.rosen@linaro.org> wrote:
> Hi,
>
> After working fine for a while, the board crashed during the weekend,
> and I am getting the following error:
>
> Texas Instruments X-Loader 1.4.4ss (Sep 30 2010 - 14:44:32)
> Beagle xM Rev A
> Reading boot sector
>
> not there
> u-boot.bin not found or blank nand contents - attempting serial boot . . .
> ## Ready for binary (kermit) download to 0x80008000 at 115200 bps..

Does anyone know what image is expected over serial in this situation?
Is it MLO or u-boot.bin?

It would be u-boot. x-loader is up and configured, and looking for u-boot.
x-load doesn't care which image it is though - you could load any
other image and x-load will just jump to it and start executing.

- Anand

It could be interesting to see whether the board can be started up via
that route.

Cheers
---Dave

_______________________________________________
linaro-dev mailing list
linaro-dev@lists.linaro.org
http://lists.linaro.org/mailman/listinfo/linaro-dev