Can you send me the output of 'readelf -a HelloWorld.dll'
On 5 February 2016 at 16:31, Ravikanth MVR <ravikanth.mvr@broadcom.com> wrote:
> Ard,
>
> Tried out again by downloading the edk2-master but the result was
> same.Please find below the snapshot.BTW,why this error-AARCH64 relative
> relocations require identical ELF and PE/COFF section offsets -comes up?
>
> "gcc" -g -fshort-wchar -fno-strict-aliasing -Wall -Werror
> -Wno-array-bounds -ffunction-sections -fdata-sections -c -include AutoGen.h
> -fno-common -DSTRING_ARRAY_NAME=HelloWorldStrings -mcmodel=large -g -Os
> -fshort-wchar -fno-stack-protector -fno-strict-aliasing -Wall -Werror
> -Wno-array-bounds -c -include AutoGen.h -fno-common -mlittle-endian
> -fno-short-enums -save-temps -fverbose-asm -fsigned-char -ffunction-sections
> -fdata-sections -fomit-frame-pointer -fno-builtin -Wno-address
> -fno-asynchronous-unwind-tables -Wno-unused-but-set-variable -o
> /home/edk2_new1/MyWorkSpace/Build/MdeModule/RELEASE_GCC48/AARCH64/MdeModulePkg/Application/HelloWorld/HelloWorld/OUTPUT/./AutoGen.obj
> -I/home/edk2_new1/MyWorkSpace/MdeModulePkg/Application/HelloWorld
> -I/home/edk2_new1/MyWorkSpace/Build/MdeModule/RELEASE_GCC48/AARCH64/MdeModulePkg/Application/HelloWorld/HelloWorld/DEBUG
> -I/home/edk2_new1/MyWorkSpace/MdePkg
> -I/home/edk2_new1/MyWorkSpace/MdePkg/Include
> -I/home/edk2_new1/MyWorkSpace/MdePkg/Include/AArch64
> -I/home/edk2_new1/MyWorkSpace/MdeModulePkg
> -I/home/edk2_new1/MyWorkSpace/MdeModulePkg/Include
> /home/edk2_new1/MyWorkSpace/Build/MdeModule/RELEASE_GCC48/AARCH64/MdeModulePkg/Application/HelloWorld/HelloWorld/DEBUG/AutoGen.c
> "ar" -cr
> /home/edk2_new1/MyWorkSpace/Build/MdeModule/RELEASE_GCC48/AARCH64/MdeModulePkg/Application/HelloWorld/HelloWorld/OUTPUT/HelloWorld.lib
> @/home/edk2_new1/MyWorkSpace/Build/MdeModule/RELEASE_GCC48/AARCH64/MdeModulePkg/Application/HelloWorld/HelloWorld/OUTPUT/object_files.lst
> "ld" -o
> /home/edk2_new1/MyWorkSpace/Build/MdeModule/RELEASE_GCC48/AARCH64/MdeModulePkg/Application/HelloWorld/HelloWorld/DEBUG/HelloWorld.dll
> --emit-relocs -nostdlib --gc-sections -u _ModuleEntryPoint -e
> _ModuleEntryPoint -Map
> /home/edk2_new1/MyWorkSpace/Build/MdeModule/RELEASE_GCC48/AARCH64/MdeModulePkg/Application/HelloWorld/HelloWorld/DEBUG/HelloWorld.map
> -z common-page-size=0x20 --start-group
> @/home/edk2_new1/MyWorkSpace/Build/MdeModule/RELEASE_GCC48/AARCH64/MdeModulePkg/Application/HelloWorld/HelloWorld/OUTPUT/static_library_files.lst
> --end-group
> --script=/home/edk2_new1/MyWorkSpace/BaseTools/Scripts/GccBase.lds
> --defsym=PECOFF_HEADER_SIZE=0x228
> "echo" objcopy not needed for
> /home/edk2_new1/MyWorkSpace/Build/MdeModule/RELEASE_GCC48/AARCH64/MdeModulePkg/Application/HelloWorld/HelloWorld/DEBUG/HelloWorld.dll
> objcopy not needed for
> /home/edk2_new1/MyWorkSpace/Build/MdeModule/RELEASE_GCC48/AARCH64/MdeModulePkg/Application/HelloWorld/HelloWorld/DEBUG/HelloWorld.dll
> cp -f
> /home/edk2_new1/MyWorkSpace/Build/MdeModule/RELEASE_GCC48/AARCH64/MdeModulePkg/Application/HelloWorld/HelloWorld/DEBUG/HelloWorld.dll
> /home/edk2_new1/MyWorkSpace/Build/MdeModule/RELEASE_GCC48/AARCH64/MdeModulePkg/Application/HelloWorld/HelloWorld/DEBUG/HelloWorld.debug
> echo --strip-unneeded -R .eh_frame
> /home/edk2_new1/MyWorkSpace/Build/MdeModule/RELEASE_GCC48/AARCH64/MdeModulePkg/Application/HelloWorld/HelloWorld/DEBUG/HelloWorld.dll
> --strip-unneeded -R .eh_frame
> /home/edk2_new1/MyWorkSpace/Build/MdeModule/RELEASE_GCC48/AARCH64/MdeModulePkg/Application/HelloWorld/HelloWorld/DEBUG/HelloWorld.dll
> echo
> /home/edk2_new1/MyWorkSpace/Build/MdeModule/RELEASE_GCC48/AARCH64/MdeModulePkg/Application/HelloWorld/HelloWorld/DEBUG/HelloWorld.dll
> /home/edk2_new1/MyWorkSpace/Build/MdeModule/RELEASE_GCC48/AARCH64/MdeModulePkg/Application/HelloWorld/HelloWorld/DEBUG/HelloWorld.dll
> cp -f
> /home/edk2_new1/MyWorkSpace/Build/MdeModule/RELEASE_GCC48/AARCH64/MdeModulePkg/Application/HelloWorld/HelloWorld/DEBUG/HelloWorld.debug
> /home/edk2_new1/MyWorkSpace/Build/MdeModule/RELEASE_GCC48/AARCH64
> "GenFw" -e UEFI_APPLICATION -o
> /home/edk2_new1/MyWorkSpace/Build/MdeModule/RELEASE_GCC48/AARCH64/MdeModulePkg/Application/HelloWorld/HelloWorld/DEBUG/HelloWorld.efi
> /home/edk2_new1/MyWorkSpace/Build/MdeModule/RELEASE_GCC48/AARCH64/MdeModulePkg/Application/HelloWorld/HelloWorld/DEBUG/HelloWorld.dll
> GenFw: ERROR 3000: Invalid
> WriteSections64():
> /home/edk2_new1/MyWorkSpace/Build/MdeModule/RELEASE_GCC48/AARCH64/MdeModulePkg/Application/HelloWorld/HelloWorld/DEBUG/HelloWorld.dll
> AARCH64 relative relocations require identical ELF and PE/COFF section
> offsets
> make: ***
> [/home/edk2_new1/MyWorkSpace/Build/MdeModule/RELEASE_GCC48/AARCH64/MdeModulePkg/Application/HelloWorld/HelloWorld/DEBUG/HelloWorld.efi]
> Error 2
>
>
> build.py...
> : error 7000: Failed to execute command
> make tbuild
> [/home/edk2_new1/MyWorkSpace/Build/MdeModule/RELEASE_GCC48/AARCH64/MdeModulePkg/Application/HelloWorld/HelloWorld]
>
>
> build.py...
> : error F002: Failed to build module
>
> /home/edk2_new1/MyWorkSpace/MdeModulePkg/Application/HelloWorld/HelloWorld.inf
> [AARCH64, GCC48, RELEASE]
>
> - Failed -
> Build end time: 07:27:21, Feb.05 2016
> Build total time: 00:01:04
>
> Thanks
> Ravi
>
> On Fri, Feb 5, 2016 at 8:06 PM, Ravikanth MVR <ravikanth.mvr@broadcom.com>
> wrote:
>>
>> Yes.I downloaded the package from https://github.com/tianocore/edk2.If you
>> want me to again download the package and try,I would.
>>
>> On Fri, Feb 5, 2016 at 8:01 PM, Ard Biesheuvel <ard.biesheuvel@linaro.org>
>> wrote:
>>>
>>> On 5 February 2016 at 15:30, Ravikanth MVR <ravikanth.mvr@broadcom.com>
>>> wrote:
>>> > Ard,
>>> > We tried out the patch and we are not seeing the relocation errors
>>> > anymore.But we are seeing a new error from WriteSection64()-"AARCH64
>>> > relative relocations require identical ELF and PE/COFF section
>>> > offsets".Below is the complete snapshot of the error.
>>> >
>>>
>>> Are you using the latest EDK2?
>>>
>>>
>>> > cp -f
>>> >
>>> > /home/edk2_new/MyWorkSpace/Build/MdeModule/RELEASE_GCC48/AARCH64/MdeModulePkg/Application/HelloWorld/HelloWorld/DEBUG/HelloWorld.dll
>>> >
>>> > /home/edk2_new/MyWorkSpace/Build/MdeModule/RELEASE_GCC48/AARCH64/MdeModulePkg/Application/HelloWorld/HelloWorld/DEBUG/HelloWorld.debug
>>> > echo --strip-unneeded -R .eh_frame
>>> >
>>> > /home/edk2_new/MyWorkSpace/Build/MdeModule/RELEASE_GCC48/AARCH64/MdeModulePkg/Application/HelloWorld/HelloWorld/DEBUG/HelloWorld.dll
>>> > --strip-unneeded -R .eh_frame
>>> >
>>> > /home/edk2_new/MyWorkSpace/Build/MdeModule/RELEASE_GCC48/AARCH64/MdeModulePkg/Application/HelloWorld/HelloWorld/DEBUG/HelloWorld.dll
>>> > echo
>>> >
>>> > /home/edk2_new/MyWorkSpace/Build/MdeModule/RELEASE_GCC48/AARCH64/MdeModulePkg/Application/HelloWorld/HelloWorld/DEBUG/HelloWorld.dll
>>> >
>>> > /home/edk2_new/MyWorkSpace/Build/MdeModule/RELEASE_GCC48/AARCH64/MdeModulePkg/Application/HelloWorld/HelloWorld/DEBUG/HelloWorld.dll
>>> > cp -f
>>> >
>>> > /home/edk2_new/MyWorkSpace/Build/MdeModule/RELEASE_GCC48/AARCH64/MdeModulePkg/Application/HelloWorld/HelloWorld/DEBUG/HelloWorld.debug
>>> > /home/edk2_new/MyWorkSpace/Build/MdeModule/RELEASE_GCC48/AARCH64
>>> > "GenFw" -e UEFI_APPLICATION -o
>>> >
>>> > /home/edk2_new/MyWorkSpace/Build/MdeModule/RELEASE_GCC48/AARCH64/MdeModulePkg/Application/HelloWorld/HelloWorld/DEBUG/HelloWorld.efi
>>> >
>>> > /home/edk2_new/MyWorkSpace/Build/MdeModule/RELEASE_GCC48/AARCH64/MdeModulePkg/Application/HelloWorld/HelloWorld/DEBUG/HelloWorld.dll
>>> > GenFw: ERROR 3000: Invalid
>>> > WriteSections64():
>>> >
>>> > /home/edk2_new/MyWorkSpace/Build/MdeModule/RELEASE_GCC48/AARCH64/MdeModulePkg/Application/HelloWorld/HelloWorld/DEBUG/HelloWorld.dll
>>> > AARCH64 relative relocations require identical ELF and PE/COFF section
>>> > offsets
>>> > make: ***
>>> >
>>> > [/home/edk2_new/MyWorkSpace/Build/MdeModule/RELEASE_GCC48/AARCH64/MdeModulePkg/Application/HelloWorld/HelloWorld/DEBUG/HelloWorld.efi]
>>> > Error 2
>>> >
>>> > Thanks
>>> > Ravi
>>> >
>>> > On Fri, Feb 5, 2016 at 6:06 PM, Ravikanth MVR
>>> > <ravikanth.mvr@broadcom.com>
>>> > wrote:
>>> >>
>>> >> Thanks Ard!Would try out and let you know the results.
>>> >>
>>> >> On Fri, Feb 5, 2016 at 2:30 PM, Ard Biesheuvel
>>> >> <ard.biesheuvel@linaro.org>
>>> >> wrote:
>>> >>>
>>> >>> On 4 February 2016 at 20:41, Ravikanth MVR
>>> >>> <ravikanth.mvr@broadcom.com>
>>> >>> wrote:
>>> >>> > Ard,
>>> >>> >
>>> >>> > We built the EDK2 with target set to AARCH64 and GCC48 as the
>>> >>> > toolchain.Still we are same relocation errors as before.Below is
>>> >>> > the
>>> >>> > complete snapshot of the error and map file as well.
>>> >>> >
>>> >>>
>>> >>> Could you try the following patch (don't forget to rebuild
>>> >>> BaseTools/)
>>> >>>
>>> >>> diff --git a/BaseTools/Source/C/GenFw/Elf64Convert.c
>>> >>> b/BaseTools/Source/C/GenFw/Elf64Convert.c
>>> >>> index 90d80a22daf2..0a1329f0f668 100644
>>> >>> --- a/BaseTools/Source/C/GenFw/Elf64Convert.c
>>> >>> +++ b/BaseTools/Source/C/GenFw/Elf64Convert.c
>>> >>> @@ -767,6 +767,9 @@ WriteSections64 (
>>> >>> case R_AARCH64_LD_PREL_LO19:
>>> >>> case R_AARCH64_CALL26:
>>> >>> case R_AARCH64_JUMP26:
>>> >>> + case R_AARCH64_PREL64:
>>> >>> + case R_AARCH64_PREL32:
>>> >>> + case R_AARCH64_PREL16:
>>> >>> //
>>> >>> // The GCC toolchains (i.e., binutils) may corrupt
>>> >>> section
>>> >>> relative
>>> >>> // relocations when emitting relocation sections into
>>> >>> fully
>>> >>> linked
>>> >>> @@ -869,6 +872,11 @@ WriteRelocations64 (
>>> >>> case R_AARCH64_JUMP26:
>>> >>> break;
>>> >>>
>>> >>> + case R_AARCH64_PREL64:
>>> >>> + case R_AARCH64_PREL32:
>>> >>> + case R_AARCH64_PREL16:
>>> >>> + break;
>>> >>> +
>>> >>> case R_AARCH64_ADR_PREL_PG_HI21:
>>> >>> case R_AARCH64_ADD_ABS_LO12_NC:
>>> >>> case R_AARCH64_LDST8_ABS_LO12_NC:
>>> >>>
>>> >>> --
>>> >>> Ard.
>>> >>>
>>> >>>
>>> >>> > "gcc" -g -fshort-wchar -fno-strict-aliasing -Wall -Werror
>>> >>> > -Wno-array-bounds -ffunction-sections -fdata-sections -c -include
>>> >>> > AutoGen.h
>>> >>> > -DSTRING_ARRAY_NAME=HelloWorldStrings -g -Os -fshort-wchar
>>> >>> > -fno-strict-aliasing -fno-stack-protector -Wall -Werror
>>> >>> > -Wno-array-bounds -c
>>> >>> > -include AutoGen.h -mcmodel=large -mlittle-endian -fno-short-enums
>>> >>> > -save-temps -fverbose-asm -fsigned-char -ffunction-sections
>>> >>> > -fdata-sections
>>> >>> > -fomit-frame-pointer -fno-builtin -Wno-address
>>> >>> > -Wno-unused-but-set-variable
>>> >>> > -o
>>> >>> >
>>> >>> >
>>> >>> > /home/ekd2_new/MyWorkSpace/Build/MdeModule/RELEASE_GCC48/AARCH64/MdeModulePkg/Application/HelloWorld/HelloWorld/OUTPUT/./AutoGen.obj
>>> >>> > -I/home/ekd2_new/MyWorkSpace/MdeModulePkg/Application/HelloWorld
>>> >>> >
>>> >>> >
>>> >>> > -I/home/ekd2_new/MyWorkSpace/Build/MdeModule/RELEASE_GCC48/AARCH64/MdeModulePkg/Application/HelloWorld/HelloWorld/DEBUG
>>> >>> > -I/home/ekd2_new/MyWorkSpace/MdePkg
>>> >>> > -I/home/ekd2_new/MyWorkSpace/MdePkg/Include
>>> >>> > -I/home/ekd2_new/MyWorkSpace/MdePkg/Include/AArch64
>>> >>> > -I/home/ekd2_new/MyWorkSpace/MdeModulePkg
>>> >>> > -I/home/ekd2_new/MyWorkSpace/MdeModulePkg/Include
>>> >>> >
>>> >>> >
>>> >>> > /home/ekd2_new/MyWorkSpace/Build/MdeModule/RELEASE_GCC48/AARCH64/MdeModulePkg/Application/HelloWorld/HelloWorld/DEBUG/AutoGen.c
>>> >>> > "ar" -cr
>>> >>> >
>>> >>> >
>>> >>> > /home/ekd2_new/MyWorkSpace/Build/MdeModule/RELEASE_GCC48/AARCH64/MdeModulePkg/Application/HelloWorld/HelloWorld/OUTPUT/HelloWorld.lib
>>> >>> >
>>> >>> >
>>> >>> > @/home/ekd2_new/MyWorkSpace/Build/MdeModule/RELEASE_GCC48/AARCH64/MdeModulePkg/Application/HelloWorld/HelloWorld/OUTPUT/object_files.lst
>>> >>> > "ld" -o
>>> >>> >
>>> >>> >
>>> >>> > /home/ekd2_new/MyWorkSpace/Build/MdeModule/RELEASE_GCC48/AARCH64/MdeModulePkg/Application/HelloWorld/HelloWorld/DEBUG/HelloWorld.dll
>>> >>> > -Ttext=0x0 --emit-relocs -nostdlib --gc-sections -u
>>> >>> > _ModuleEntryPoint
>>> >>> > -e
>>> >>> > _ModuleEntryPoint -Map
>>> >>> >
>>> >>> >
>>> >>> > /home/ekd2_new/MyWorkSpace/Build/MdeModule/RELEASE_GCC48/AARCH64/MdeModulePkg/Application/HelloWorld/HelloWorld/DEBUG/HelloWorld.map
>>> >>> > --start-group
>>> >>> >
>>> >>> >
>>> >>> > @/home/ekd2_new/MyWorkSpace/Build/MdeModule/RELEASE_GCC48/AARCH64/MdeModulePkg/Application/HelloWorld/HelloWorld/OUTPUT/static_library_files.lst
>>> >>> > --end-group
>>> >>> > "echo" objcopy not needed for
>>> >>> >
>>> >>> >
>>> >>> > /home/ekd2_new/MyWorkSpace/Build/MdeModule/RELEASE_GCC48/AARCH64/MdeModulePkg/Application/HelloWorld/HelloWorld/DEBUG/HelloWorld.dll
>>> >>> > objcopy not needed for
>>> >>> >
>>> >>> >
>>> >>> > /home/ekd2_new/MyWorkSpace/Build/MdeModule/RELEASE_GCC48/AARCH64/MdeModulePkg/Application/HelloWorld/HelloWorld/DEBUG/HelloWorld.dll
>>> >>> > cp -f
>>> >>> >
>>> >>> >
>>> >>> > /home/ekd2_new/MyWorkSpace/Build/MdeModule/RELEASE_GCC48/AARCH64/MdeModulePkg/Application/HelloWorld/HelloWorld/DEBUG/HelloWorld.dll
>>> >>> >
>>> >>> >
>>> >>> > /home/ekd2_new/MyWorkSpace/Build/MdeModule/RELEASE_GCC48/AARCH64/MdeModulePkg/Application/HelloWorld/HelloWorld/DEBUG/HelloWorld.debug
>>> >>> > echo --strip-unneeded -R .eh_frame
>>> >>> >
>>> >>> >
>>> >>> > /home/ekd2_new/MyWorkSpace/Build/MdeModule/RELEASE_GCC48/AARCH64/MdeModulePkg/Application/HelloWorld/HelloWorld/DEBUG/HelloWorld.dll
>>> >>> > --strip-unneeded -R .eh_frame
>>> >>> >
>>> >>> >
>>> >>> > /home/ekd2_new/MyWorkSpace/Build/MdeModule/RELEASE_GCC48/AARCH64/MdeModulePkg/Application/HelloWorld/HelloWorld/DEBUG/HelloWorld.dll
>>> >>> > echo
>>> >>> >
>>> >>> >
>>> >>> > /home/ekd2_new/MyWorkSpace/Build/MdeModule/RELEASE_GCC48/AARCH64/MdeModulePkg/Application/HelloWorld/HelloWorld/DEBUG/HelloWorld.dll
>>> >>> >
>>> >>> >
>>> >>> > /home/ekd2_new/MyWorkSpace/Build/MdeModule/RELEASE_GCC48/AARCH64/MdeModulePkg/Application/HelloWorld/HelloWorld/DEBUG/HelloWorld.dll
>>> >>> > cp -f
>>> >>> >
>>> >>> >
>>> >>> > /home/ekd2_new/MyWorkSpace/Build/MdeModule/RELEASE_GCC48/AARCH64/MdeModulePkg/Application/HelloWorld/HelloWorld/DEBUG/HelloWorld.debug
>>> >>> > /home/ekd2_new/MyWorkSpace/Build/MdeModule/RELEASE_GCC48/AARCH64
>>> >>> > "GenFw" -e UEFI_APPLICATION -o
>>> >>> >
>>> >>> >
>>> >>> > /home/ekd2_new/MyWorkSpace/Build/MdeModule/RELEASE_GCC48/AARCH64/MdeModulePkg/Application/HelloWorld/HelloWorld/DEBUG/HelloWorld.efi
>>> >>> >
>>> >>> >
>>> >>> > /home/ekd2_new/MyWorkSpace/Build/MdeModule/RELEASE_GCC48/AARCH64/MdeModulePkg/Application/HelloWorld/HelloWorld/DEBUG/HelloWorld.dll
>>> >>> > GenFw: ERROR 3000: Invalid
>>> >>> > WriteSections64():
>>> >>> >
>>> >>> >
>>> >>> > /home/ekd2_new/MyWorkSpace/Build/MdeModule/RELEASE_GCC48/AARCH64/MdeModulePkg/Application/HelloWorld/HelloWorld/DEBUG/HelloWorld.dll
>>> >>> > unsupported ELF EM_AARCH64 relocation 0x105.
>>> >>> > GenFw: ERROR 3000: Invalid
>>> >>> > make: ***
>>> >>> >
>>> >>> >
>>> >>> > [/home/ekd2_new/MyWorkSpace/Build/MdeModule/RELEASE_GCC48/AARCH64/MdeModulePkg/Application/HelloWorld/HelloWorld/DEBUG/HelloWorld.efi]
>>> >>> > Error 2
>>> >>> > WriteRelocations64():
>>> >>> >
>>> >>> >
>>> >>> > /home/ekd2_new/MyWorkSpace/Build/MdeModule/RELEASE_GCC48/AARCH64/MdeModulePkg/Application/HelloWorld/HelloWorld/DEBUG/HelloWorld.dll
>>> >>> > unsupported ELF EM_AARCH64 relocation 0x105.
>>> >>> >
>>> >>> >
>>> >>> > build.py...
>>> >>> > : error 7000: Failed to execute command
>>> >>> > make all
>>> >>> >
>>> >>> >
>>> >>> > [/home/ekd2_new/MyWorkSpace/Build/MdeModule/RELEASE_GCC48/AARCH64/MdeModulePkg/Application/HelloWorld/HelloWorld]
>>> >>> >
>>> >>> > - Failed -
>>> >>> > Build end time: 11:29:54, Feb.04 2016
>>> >>> > Build total time: 00:00:09
>>> >>> >
>>> >>> > Thanks
>>> >>> > Ravi
>>> >>> >
>>> >>> > On Wed, Feb 3, 2016 at 12:54 AM, Ravikanth MVR
>>> >>> > <ravikanth.mvr@broadcom.com>
>>> >>> > wrote:
>>> >>> >>
>>> >>> >> Ard,
>>> >>> >>
>>> >>> >> I tried building the EDK2 with the below configuration and ended
>>> >>> >> up
>>> >>> >> with
>>> >>> >> the same result as before.Would try out the scenario with
>>> >>> >> GCC4.9/GCC4.8
>>> >>> >> compiler+Toolchain:GCC49/GCC48 and target set to AARCH64. Would
>>> >>> >> let
>>> >>> >> you know
>>> >>> >> the results.
>>> >>> >>
>>> >>> >> Thanks.
>>> >>> >>
>>> >>> >> On Tue, Feb 2, 2016 at 10:18 PM, Ravikanth MVR
>>> >>> >> <ravikanth.mvr@broadcom.com> wrote:
>>> >>> >>>
>>> >>> >>> Ard,
>>> >>> >>> Below is my configuration
>>> >>> >>>
>>> >>> >>> ACTIVE_PLATFORM = MdeModulePkg/MdeModulePkg.dsc
>>> >>> >>> TARGET = RELEASE
>>> >>> >>> TARGET_ARCH = AARCH64
>>> >>> >>> TOOL_CHAIN_CONF = Conf/tools_def.txt
>>> >>> >>> TOOL_CHAIN_TAG = GCC49
>>> >>> >>>
>>> >>> >>> And GCC5.0.0 compiler is being used to compile the code or you
>>> >>> >>> want
>>> >>> >>> me to
>>> >>> >>> use the GCC4.9 compiler to compile as well?
>>> >>> >>>
>>> >>> >>> Thanks.
>>> >>> >>>
>>> >>> >>> On Tue, Feb 2, 2016 at 8:56 PM, Ravikanth MVR
>>> >>> >>> <ravikanth.mvr@broadcom.com> wrote:
>>> >>> >>>>
>>> >>> >>>> OK got it!Would build AARCH64 with GCC48/GCC49 .Please correct
>>> >>> >>>> me if
>>> >>> >>>> I
>>> >>> >>>> am wrong.
>>> >>> >>>>
>>> >>> >>>> Thanks.
>>> >>> >>>> On Tue, Feb 2, 2016 at 8:54 PM, Ard Biesheuvel
>>> >>> >>>> <ard.biesheuvel@linaro.org> wrote:
>>> >>> >>>>>
>>> >>> >>>>> On 2 February 2016 at 16:23, Ravikanth MVR
>>> >>> >>>>> <ravikanth.mvr@broadcom.com>
>>> >>> >>>>> wrote:
>>> >>> >>>>> > Ard,
>>> >>> >>>>> >
>>> >>> >>>>> > I have been using GCC5.0.0(Experimental version).
>>> >>> >>>>> >
>>> >>> >>>>> > gcc (Cavium Inc. Version 1.0 build 297) 5.0.0 20141220
>>> >>> >>>>> > (experimental)
>>> >>> >>>>> >
>>> >>> >>>>> > I would try with GCC49/48 and let you know.
>>> >>> >>>>> >
>>> >>> >>>>>
>>> >>> >>>>> I don't mean the actual compiler, I mean the toolchain
>>> >>> >>>>> definition
>>> >>> >>>>> in
>>> >>> >>>>> EDK2. You are using ARMGCC or ARMLINUXGCC, neither of which are
>>> >>> >>>>> suitable for building AArch64. You should use GCC48 or GCC49
>>> >>> >>>>> instead
>>> >>> >>>>>
>>> >>> >>>>> --
>>> >>> >>>>> Ard.
>>> >>> >>>>>
>>> >>> >>>>> > On Tue, Feb 2, 2016 at 4:40 PM, Ard Biesheuvel
>>> >>> >>>>> > <ard.biesheuvel@linaro.org>
>>> >>> >>>>> > wrote:
>>> >>> >>>>> >>
>>> >>> >>>>> >> It looks like you are using the wrong compiler. You should
>>> >>> >>>>> >> use
>>> >>> >>>>> >> GCC48
>>> >>> >>>>> >> or GCC49 instead.
>>> >>> >>>>> >>
>>> >>> >>>>> >>
>>> >>> >>>>> >> On 2 February 2016 at 12:08, Ravikanth MVR
>>> >>> >>>>> >> <ravikanth.mvr@broadcom.com>
>>> >>> >>>>> >> wrote:
>>> >>> >>>>> >> > Thanks Ard!I followed the steps and I could find out that
>>> >>> >>>>> >> > NO
>>> >>> >>>>> >> > standard
>>> >>> >>>>> >> > library was included.Below is the list of libraries that
>>> >>> >>>>> >> > were
>>> >>> >>>>> >> > getting
>>> >>> >>>>> >> > included.
>>> >>> >>>>> >> >
>>> >>> >>>>> >> > UefiApplicationEntryPoint.lib(ApplicationEntryPoint.obj)
>>> >>> >>>>> >> > HelloWorld.lib(AutoGen.obj)
>>> >>> >>>>> >> > UefiDebugLibStdErr.lib(DebugLib.obj)
>>> >>> >>>>> >> > UefiBootServicesTableLib.lib(UefiBootServicesTableLib.obj)
>>> >>> >>>>> >> >
>>> >>> >>>>> >> >
>>> >>> >>>>> >> > UefiRuntimeServicesTableLib.lib(UefiRuntimeServicesTableLib.obj)
>>> >>> >>>>> >> > UefiLib.lib(UefiLib.obj)
>>> >>> >>>>> >> >
>>> >>> >>>>> >> >
>>> >>> >>>>> >> > BaseDebugPrintErrorLevelLib.lib(BaseDebugPrintErrorLevelLib.obj)
>>> >>> >>>>> >> > BasePrintLib.lib(PrintLib.obj)
>>> >>> >>>>> >> > BasePrintLib.lib(PrintLibInternal.obj)
>>> >>> >>>>> >> > BaseLib.lib(DivU64x32Remainder.obj)
>>> >>> >>>>> >> > BaseLib.lib(CpuDeadLoop.obj)
>>> >>> >>>>> >> > BaseLib.lib(String.obj)
>>> >>> >>>>> >> > BaseLib.lib(Unaligned.obj)
>>> >>> >>>>> >> > BaseLib.lib(Math64.obj)
>>> >>> >>>>> >> >
>>> >>> >>>>> >> > I have included .map file as well with this mail.
>>> >>> >>>>> >> >
>>> >>> >>>>> >> > Thanks.
>>> >>> >>>>> >> >
>>> >>> >>>>> >> > On Mon, Feb 1, 2016 at 1:24 PM, Ard Biesheuvel
>>> >>> >>>>> >> > <ard.biesheuvel@linaro.org>
>>> >>> >>>>> >> > wrote:
>>> >>> >>>>> >> >>
>>> >>> >>>>> >> >> On 1 February 2016 at 08:36, M.V.R. Ravikanth
>>> >>> >>>>> >> >> <ravikanth.mvr@avagotech.com> wrote:
>>> >>> >>>>> >> >> > Ard,
>>> >>> >>>>> >> >> >
>>> >>> >>>>> >> >> > I understand that we have to implement alternative C++
>>> >>> >>>>> >> >> > runtime
>>> >>> >>>>> >> >> > API
>>> >>> >>>>> >> >> > which
>>> >>> >>>>> >> >> > maps to new and delete in EDK2 i.e.,AllocatePool and
>>> >>> >>>>> >> >> > FreePool.
>>> >>> >>>>> >> >> >
>>> >>> >>>>> >> >> > I did implement alternative new and delete API's,which
>>> >>> >>>>> >> >> > uses
>>> >>> >>>>> >> >> > AllocatePool
>>> >>> >>>>> >> >> > and
>>> >>> >>>>> >> >> > FreePool,for OUR code and most of the relocation errors
>>> >>> >>>>> >> >> > had
>>> >>> >>>>> >> >> > gone.BUT
>>> >>> >>>>> >> >> > when
>>> >>> >>>>> >> >> > the CPP program(HelloWorld) under compilation doesn't
>>> >>> >>>>> >> >> > even
>>> >>> >>>>> >> >> > call
>>> >>> >>>>> >> >> > the
>>> >>> >>>>> >> >> > C++
>>> >>> >>>>> >> >> > runtime API's,why are we seeing these errors?-This is
>>> >>> >>>>> >> >> > what
>>> >>> >>>>> >> >> > I am
>>> >>> >>>>> >> >> > trying
>>> >>> >>>>> >> >> > to
>>> >>> >>>>> >> >> > understand.
>>> >>> >>>>> >> >> >
>>> >>> >>>>> >> >>
>>> >>> >>>>> >> >> If you add a -Map xxx.map option to the linker command,
>>> >>> >>>>> >> >> you
>>> >>> >>>>> >> >> will
>>> >>> >>>>> >> >> get a
>>> >>> >>>>> >> >> map file that tells you exactly which object was included
>>> >>> >>>>> >> >> in
>>> >>> >>>>> >> >> the
>>> >>> >>>>> >> >> link,
>>> >>> >>>>> >> >> and why (iow, which symbol dependency it satisfies) That
>>> >>> >>>>> >> >> way,
>>> >>> >>>>> >> >> you
>>> >>> >>>>> >> >> will
>>> >>> >>>>> >> >> be able to figure out which standard library is included,
>>> >>> >>>>> >> >> and
>>> >>> >>>>> >> >> for
>>> >>> >>>>> >> >> which reason.
>>> >>> >>>>> >> >>
>>> >>> >>>>> >> >> > Thanks.
>>> >>> >>>>> >> >> > ________________________________
>>> >>> >>>>> >> >> > From: Ard Biesheuvel
>>> >>> >>>>> >> >> > Sent: 01-02-2016 12:31
>>> >>> >>>>> >> >> > To: M.V.R. Ravikanth
>>> >>> >>>>> >> >> >
>>> >>> >>>>> >> >> > Cc: Leif Lindholm; Daniel Samuelraj; Jianning Wang;
>>> >>> >>>>> >> >> > Linaro
>>> >>> >>>>> >> >> > UEFI
>>> >>> >>>>> >> >> > Mailman
>>> >>> >>>>> >> >> > List; Sadananda Murthy; Unnikrishnan P S
>>> >>> >>>>> >> >> > Subject: Re: [Linaro-uefi] Compiling CPP files ARM64
>>> >>> >>>>> >> >> >
>>> >>> >>>>> >> >> > On 1 February 2016 at 07:51, M.V.R. Ravikanth
>>> >>> >>>>> >> >> > <ravikanth.mvr@avagotech.com> wrote:
>>> >>> >>>>> >> >> >> Ard,
>>> >>> >>>>> >> >> >> I would try to explain here,
>>> >>> >>>>> >> >> >>
>>> >>> >>>>> >> >> >> 1.Till now we have been compiling CPP programs in UDK
>>> >>> >>>>> >> >> >> with
>>> >>> >>>>> >> >> >> VS2005/VS2008
>>> >>> >>>>> >> >> >> as
>>> >>> >>>>> >> >> >> toolchain and it worked well.
>>> >>> >>>>> >> >> >>
>>> >>> >>>>> >> >> >> 2.Now,we have a requirement to support AARCH64
>>> >>> >>>>> >> >> >> architecture
>>> >>> >>>>> >> >> >> with
>>> >>> >>>>> >> >> >> ARMGCC
>>> >>> >>>>> >> >> >> as
>>> >>> >>>>> >> >> >> the toolchain.But when we tried to compile our CPP
>>> >>> >>>>> >> >> >> code/Sample
>>> >>> >>>>> >> >> >> HelloWorld
>>> >>> >>>>> >> >> >> application(HelloWorld.c is renamed to HelloWorld.cpp)
>>> >>> >>>>> >> >> >> with
>>> >>> >>>>> >> >> >> ARMGCC
>>> >>> >>>>> >> >> >> as
>>> >>> >>>>> >> >> >> toolchain,we were seeing relocation errors such as
>>> >>> >>>>> >> >> >> 0x105.
>>> >>> >>>>> >> >> >>
>>> >>> >>>>> >> >> >> 3.As advised by you,we tried compiling a sample
>>> >>> >>>>> >> >> >> HelloWorld
>>> >>> >>>>> >> >> >> CPP
>>> >>> >>>>> >> >> >> program
>>> >>> >>>>> >> >> >> under
>>> >>> >>>>> >> >> >> EDK2 and still we are seeing the same relocation
>>> >>> >>>>> >> >> >> errors.
>>> >>> >>>>> >> >> >>
>>> >>> >>>>> >> >> >> Questions:
>>> >>> >>>>> >> >> >>
>>> >>> >>>>> >> >> >> 1.If EDK2 doesn't support CPP code,what should we do
>>> >>> >>>>> >> >> >> to
>>> >>> >>>>> >> >> >> resolve the
>>> >>> >>>>> >> >> >> relocation errors we are observing?
>>> >>> >>>>> >> >> >>
>>> >>> >>>>> >> >> >> Please correct me,if I have missed something.
>>> >>> >>>>> >> >> >>
>>> >>> >>>>> >> >> >
>>> >>> >>>>> >> >> > The relocation errors are a symptom of the fact that
>>> >>> >>>>> >> >> > you
>>> >>> >>>>> >> >> > are
>>> >>> >>>>> >> >> > trying
>>> >>> >>>>> >> >> > to
>>> >>> >>>>> >> >> > link the Linux specific C++ runtime into your EDK2
>>> >>> >>>>> >> >> > binary.
>>> >>> >>>>> >> >> > This
>>> >>> >>>>> >> >> > is a
>>> >>> >>>>> >> >> > pointless exercise, since the Linux C++ runtime is
>>> >>> >>>>> >> >> > fundamentally
>>> >>> >>>>> >> >> > incompatible with EDK2, So please, don't ask any more
>>> >>> >>>>> >> >> > questions
>>> >>> >>>>> >> >> > about
>>> >>> >>>>> >> >> > relocation errors, and focus on implementing an
>>> >>> >>>>> >> >> > alternative
>>> >>> >>>>> >> >> > C++
>>> >>> >>>>> >> >> > runtime that maps calls to new() and delete() onto EDK2
>>> >>> >>>>> >> >> > APIs,
>>> >>> >>>>> >> >> > i.e.,
>>> >>> >>>>> >> >> > AllocatePool and FreePool. Note that you will still
>>> >>> >>>>> >> >> > have
>>> >>> >>>>> >> >> > problems
>>> >>> >>>>> >> >> > with
>>> >>> >>>>> >> >> > symbol decoration, since EDK2 header file don't have
>>> >>> >>>>> >> >> > 'extern
>>> >>> >>>>> >> >> > "C"'
>>> >>> >>>>> >> >> > qualifiers around C declarations.
>>> >>> >>>>> >> >> >
>>> >>> >>>>> >> >> >
>>> >>> >>>>> >> >> >
>>> >>> >>>>> >> >> >> ________________________________
>>> >>> >>>>> >> >> >> From: Ard Biesheuvel
>>> >>> >>>>> >> >> >> Sent: 01-02-2016 11:59
>>> >>> >>>>> >> >> >> To: Ravikanth MVR
>>> >>> >>>>> >> >> >> Cc: Leif Lindholm; Daniel Samuelraj; Jianning Wang;
>>> >>> >>>>> >> >> >> Linaro
>>> >>> >>>>> >> >> >> UEFI
>>> >>> >>>>> >> >> >> Mailman
>>> >>> >>>>> >> >> >> List; Sadananda Murthy; Unnikrishnan P S
>>> >>> >>>>> >> >> >> Subject: Re: [Linaro-uefi] Compiling CPP files ARM64
>>> >>> >>>>> >> >> >>
>>> >>> >>>>> >> >> >> On 31 January 2016 at 20:16, Ravikanth MVR
>>> >>> >>>>> >> >> >> <ravikanth.mvr@avagotech.com>
>>> >>> >>>>> >> >> >> wrote:
>>> >>> >>>>> >> >> >>> +Unni.
>>> >>> >>>>> >> >> >>>
>>> >>> >>>>> >> >> >>> Ard,
>>> >>> >>>>> >> >> >>> I have done a native compilation with EDK2 and I am
>>> >>> >>>>> >> >> >>> facing
>>> >>> >>>>> >> >> >>> same
>>> >>> >>>>> >> >> >>> issues
>>> >>> >>>>> >> >> >>> as
>>> >>> >>>>> >> >> >>> I
>>> >>> >>>>> >> >> >>> did before.Below is the snapshot of the errors I
>>> >>> >>>>> >> >> >>> received.
>>> >>> >>>>> >> >> >>>
>>> >>> >>>>> >> >> >>
>>> >>> >>>>> >> >> >> I have explained twice already why C++ under EDK2 is
>>> >>> >>>>> >> >> >> not
>>> >>> >>>>> >> >> >> going
>>> >>> >>>>> >> >> >> to
>>> >>> >>>>> >> >> >> work. What exactly were you expecting?
>>> >>> >>>>> >> >> >> --
>>> >>> >>>>> >> >> >> Ard.
>>> >>> >>>>> >> >> >>
>>> >>> >>>>> >> >> >>
>>> >>> >>>>> >> >> >>> "GenFw" -e UEFI_APPLICATION -o
>>> >>> >>>>> >> >> >>>
>>> >>> >>>>> >> >> >>>
>>> >>> >>>>> >> >> >>>
>>> >>> >>>>> >> >> >>>
>>> >>> >>>>> >> >> >>>
>>> >>> >>>>> >> >> >>>
>>> >>> >>>>> >> >> >>>
>>> >>> >>>>> >> >> >>> /home/edk2/MyWorkSpace/Build/MdeModule/RELEASE_ARMGCC/AARCH64/MdeModulePkg/Application/HelloWorld/HelloWorld/DEBUG/HelloWorld.efi
>>> >>> >>>>> >> >> >>>
>>> >>> >>>>> >> >> >>>
>>> >>> >>>>> >> >> >>>
>>> >>> >>>>> >> >> >>>
>>> >>> >>>>> >> >> >>>
>>> >>> >>>>> >> >> >>>
>>> >>> >>>>> >> >> >>>
>>> >>> >>>>> >> >> >>> /home/edk2/MyWorkSpace/Build/MdeModule/RELEASE_ARMGCC/AARCH64/MdeModulePkg/Application/HelloWorld/HelloWorld/DEBUG/HelloWorld.dll
>>> >>> >>>>> >> >> >>> GenFw: ERROR 3000: Invalid
>>> >>> >>>>> >> >> >>> WriteSections64():
>>> >>> >>>>> >> >> >>>
>>> >>> >>>>> >> >> >>>
>>> >>> >>>>> >> >> >>>
>>> >>> >>>>> >> >> >>>
>>> >>> >>>>> >> >> >>>
>>> >>> >>>>> >> >> >>>
>>> >>> >>>>> >> >> >>>
>>> >>> >>>>> >> >> >>> /home/edk2/MyWorkSpace/Build/MdeModule/RELEASE_ARMGCC/AARCH64/MdeModulePkg/Application/HelloWorld/HelloWorld/DEBUG/HelloWorld.dll
>>> >>> >>>>> >> >> >>> unsupported ELF EM_AARCH64 relocation 0x105.
>>> >>> >>>>> >> >> >>> GenFw: ERROR 3000: Invalid
>>> >>> >>>>> >> >> >>> make: ***
>>> >>> >>>>> >> >> >>>
>>> >>> >>>>> >> >> >>>
>>> >>> >>>>> >> >> >>>
>>> >>> >>>>> >> >> >>>
>>> >>> >>>>> >> >> >>>
>>> >>> >>>>> >> >> >>>
>>> >>> >>>>> >> >> >>>
>>> >>> >>>>> >> >> >>> [/home/edk2/MyWorkSpace/Build/MdeModule/RELEASE_ARMGCC/AARCH64/MdeModulePkg/Application/HelloWorld/HelloWorld/DEBUG/HelloWorld.efi]
>>> >>> >>>>> >> >> >>> Error 2
>>> >>> >>>>> >> >> >>> WriteRelocations64():
>>> >>> >>>>> >> >> >>>
>>> >>> >>>>> >> >> >>>
>>> >>> >>>>> >> >> >>>
>>> >>> >>>>> >> >> >>>
>>> >>> >>>>> >> >> >>>
>>> >>> >>>>> >> >> >>>
>>> >>> >>>>> >> >> >>>
>>> >>> >>>>> >> >> >>> /home/edk2/MyWorkSpace/Build/MdeModule/RELEASE_ARMGCC/AARCH64/MdeModulePkg/Application/HelloWorld/HelloWorld/DEBUG/HelloWorld.dll
>>> >>> >>>>> >> >> >>> unsupported ELF EM_AARCH64 relocation 0x105.
>>> >>> >>>>> >> >> >>>
>>> >>> >>>>> >> >> >>>
>>> >>> >>>>> >> >> >>> build.py...
>>> >>> >>>>> >> >> >>> : error 7000: Failed to execute command
>>> >>> >>>>> >> >> >>> make --no-print-directory all
>>> >>> >>>>> >> >> >>>
>>> >>> >>>>> >> >> >>>
>>> >>> >>>>> >> >> >>>
>>> >>> >>>>> >> >> >>>
>>> >>> >>>>> >> >> >>>
>>> >>> >>>>> >> >> >>>
>>> >>> >>>>> >> >> >>>
>>> >>> >>>>> >> >> >>> [/home/edk2/MyWorkSpace/Build/MdeModule/RELEASE_ARMGCC/AARCH64/MdeModulePkg/Application/HelloWorld/HelloWorld]
>>> >>> >>>>> >> >> >>>
>>> >>> >>>>> >> >> >>> - Failed -
>>> >>> >>>>> >> >> >>> Build end time: 19:12:41, Jan.31 2016
>>> >>> >>>>> >> >> >>> Build total time: 00:00:15
>>> >>> >>>>> >> >> >>>
>>> >>> >>>>> >> >> >>> Thanks
>>> >>> >>>>> >> >> >>> Ravi
>>> >>> >>>>> >> >> >>>
>>> >>> >>>>> >> >> >>> On Wed, Jan 27, 2016 at 2:31 PM, Ard Biesheuvel
>>> >>> >>>>> >> >> >>> <ard.biesheuvel@linaro.org>
>>> >>> >>>>> >> >> >>> wrote:
>>> >>> >>>>> >> >> >>>>
>>> >>> >>>>> >> >> >>>> On 27 January 2016 at 09:51, Ravikanth MVR
>>> >>> >>>>> >> >> >>>> <ravikanth.mvr@avagotech.com>
>>> >>> >>>>> >> >> >>>> wrote:
>>> >>> >>>>> >> >> >>>> > Ard,
>>> >>> >>>>> >> >> >>>> > I was trying to compile and generate helloworld
>>> >>> >>>>> >> >> >>>> > application via
>>> >>> >>>>> >> >> >>>> > EDK2.Under
>>> >>> >>>>> >> >> >>>> > the "MyWorkSpace\BaseTools\Bin" directory I did
>>> >>> >>>>> >> >> >>>> > not
>>> >>> >>>>> >> >> >>>> > find
>>> >>> >>>>> >> >> >>>> > "Win32"
>>> >>> >>>>> >> >> >>>> > directory
>>> >>> >>>>> >> >> >>>> > which has GenFw utility.But the UDK package has
>>> >>> >>>>> >> >> >>>> > Win32
>>> >>> >>>>> >> >> >>>> > directory.
>>> >>> >>>>> >> >> >>>> >
>>> >>> >>>>> >> >> >>>> > Could you let me know on how to build and EDK2
>>> >>> >>>>> >> >> >>>> > package
>>> >>> >>>>> >> >> >>>> > in
>>> >>> >>>>> >> >> >>>> > Windows
>>> >>> >>>>> >> >> >>>> > or
>>> >>> >>>>> >> >> >>>> > else Am
>>> >>> >>>>> >> >> >>>> > I missing something here?
>>> >>> >>>>> >> >> >>>> >
>>> >>> >>>>> >> >> >>>>
>>> >>> >>>>> >> >> >>>> I haven't used Windows for software development work
>>> >>> >>>>> >> >> >>>> in
>>> >>> >>>>> >> >> >>>> 15
>>> >>> >>>>> >> >> >>>> years,
>>> >>> >>>>> >> >> >>>> so
>>> >>> >>>>> >> >> >>>> I
>>> >>> >>>>> >> >> >>>> am really not the person you should be asking this.
>>> >>> >>>>> >> >> >>>>
>>> >>> >>>>> >> >> >>>> --
>>> >>> >>>>> >> >> >>>> Ard.
>>> >>> >>>>> >> >> >>>>
>>> >>> >>>>> >> >> >>>> > On Thu, Jan 14, 2016 at 3:03 PM, Ravikanth MVR
>>> >>> >>>>> >> >> >>>> > <ravikanth.mvr@avagotech.com>
>>> >>> >>>>> >> >> >>>> > wrote:
>>> >>> >>>>> >> >> >>>> >>
>>> >>> >>>>> >> >> >>>> >> In UDK.I will try out on EDK2 and let you know
>>> >>> >>>>> >> >> >>>> >> the
>>> >>> >>>>> >> >> >>>> >> results.
>>> >>> >>>>> >> >> >>>> >>
>>> >>> >>>>> >> >> >>>> >> Thanks.
>>> >>> >>>>> >> >> >>>> >>
>>> >>> >>>>> >> >> >>>> >> On Thu, Jan 14, 2016 at 3:02 PM, Ard Biesheuvel
>>> >>> >>>>> >> >> >>>> >> <ard.biesheuvel@linaro.org> wrote:
>>> >>> >>>>> >> >> >>>> >>>
>>> >>> >>>>> >> >> >>>> >>> On 14 January 2016 at 10:28, Ravikanth MVR
>>> >>> >>>>> >> >> >>>> >>> <ravikanth.mvr@avagotech.com>
>>> >>> >>>>> >> >> >>>> >>> wrote:
>>> >>> >>>>> >> >> >>>> >>> > Ard,
>>> >>> >>>>> >> >> >>>> >>> >
>>> >>> >>>>> >> >> >>>> >>> > OK.But when a simple HelloWorld program,which
>>> >>> >>>>> >> >> >>>> >>> > is
>>> >>> >>>>> >> >> >>>> >>> > part
>>> >>> >>>>> >> >> >>>> >>> > of
>>> >>> >>>>> >> >> >>>> >>> > EDK2
>>> >>> >>>>> >> >> >>>> >>> > sample
>>> >>> >>>>> >> >> >>>> >>> > programs and which is written in c,is renamed
>>> >>> >>>>> >> >> >>>> >>> > to
>>> >>> >>>>> >> >> >>>> >>> > .CPP,we get
>>> >>> >>>>> >> >> >>>> >>> > these
>>> >>> >>>>> >> >> >>>> >>> > relocation issues in-spite of not using any
>>> >>> >>>>> >> >> >>>> >>> > C++
>>> >>> >>>>> >> >> >>>> >>> > runtime
>>> >>> >>>>> >> >> >>>> >>> > API's.
>>> >>> >>>>> >> >> >>>> >>> >
>>> >>> >>>>> >> >> >>>> >>>
>>> >>> >>>>> >> >> >>>> >>> In UDK or EDK2?
>>> >>> >>>>> >> >> >>>> >>>
>>> >>> >>>>> >> >> >>>> >>> > On Thu, Jan 14, 2016 at 2:39 PM, Ard
>>> >>> >>>>> >> >> >>>> >>> > Biesheuvel
>>> >>> >>>>> >> >> >>>> >>> > <ard.biesheuvel@linaro.org>
>>> >>> >>>>> >> >> >>>> >>> > wrote:
>>> >>> >>>>> >> >> >>>> >>> >>
>>> >>> >>>>> >> >> >>>> >>> >> On 14 January 2016 at 10:06, Ravikanth MVR
>>> >>> >>>>> >> >> >>>> >>> >> <ravikanth.mvr@avagotech.com>
>>> >>> >>>>> >> >> >>>> >>> >> wrote:
>>> >>> >>>>> >> >> >>>> >>> >> > Hi Ard,
>>> >>> >>>>> >> >> >>>> >>> >> >
>>> >>> >>>>> >> >> >>>> >>> >> > Hope you remember we speaking about the
>>> >>> >>>>> >> >> >>>> >>> >> > 0x105
>>> >>> >>>>> >> >> >>>> >>> >> > and
>>> >>> >>>>> >> >> >>>> >>> >> > 0x0
>>> >>> >>>>> >> >> >>>> >>> >> > relocation
>>> >>> >>>>> >> >> >>>> >>> >> > issues
>>> >>> >>>>> >> >> >>>> >>> >> > which we came across while compiling a
>>> >>> >>>>> >> >> >>>> >>> >> > simple
>>> >>> >>>>> >> >> >>>> >>> >> > HelloWorld
>>> >>> >>>>> >> >> >>>> >>> >> > program
>>> >>> >>>>> >> >> >>>> >>> >> > in
>>> >>> >>>>> >> >> >>>> >>> >> > CPP.As
>>> >>> >>>>> >> >> >>>> >>> >> > you said on the other thread(EDK2 mailing
>>> >>> >>>>> >> >> >>>> >>> >> > list)we
>>> >>> >>>>> >> >> >>>> >>> >> > need
>>> >>> >>>>> >> >> >>>> >>> >> > some
>>> >>> >>>>> >> >> >>>> >>> >> > changes
>>> >>> >>>>> >> >> >>>> >>> >> > to
>>> >>> >>>>> >> >> >>>> >>> >> > compiler and GenFw utility of UDK,can we
>>> >>> >>>>> >> >> >>>> >>> >> > take
>>> >>> >>>>> >> >> >>>> >>> >> > the
>>> >>> >>>>> >> >> >>>> >>> >> > required
>>> >>> >>>>> >> >> >>>> >>> >> > changes
>>> >>> >>>>> >> >> >>>> >>> >> > forward
>>> >>> >>>>> >> >> >>>> >>> >> > and come up with a UDK with this support?
>>> >>> >>>>> >> >> >>>> >>> >> >
>>> >>> >>>>> >> >> >>>> >>> >> > We are stuck at this juncture with this
>>> >>> >>>>> >> >> >>>> >>> >> > activity
>>> >>> >>>>> >> >> >>>> >>> >> > and
>>> >>> >>>>> >> >> >>>> >>> >> > would
>>> >>> >>>>> >> >> >>>> >>> >> > need
>>> >>> >>>>> >> >> >>>> >>> >> > your
>>> >>> >>>>> >> >> >>>> >>> >> > help
>>> >>> >>>>> >> >> >>>> >>> >> > badly.
>>> >>> >>>>> >> >> >>>> >>> >> >
>>> >>> >>>>> >> >> >>>> >>> >>
>>> >>> >>>>> >> >> >>>> >>> >> Please forget about UDK, and rebase your work
>>> >>> >>>>> >> >> >>>> >>> >> onto
>>> >>> >>>>> >> >> >>>> >>> >> the
>>> >>> >>>>> >> >> >>>> >>> >> latest
>>> >>> >>>>> >> >> >>>> >>> >> EDK2
>>> >>> >>>>> >> >> >>>> >>> >> master branch. There have been many changes
>>> >>> >>>>> >> >> >>>> >>> >> to
>>> >>> >>>>> >> >> >>>> >>> >> the
>>> >>> >>>>> >> >> >>>> >>> >> way
>>> >>> >>>>> >> >> >>>> >>> >> relocations
>>> >>> >>>>> >> >> >>>> >>> >> are
>>> >>> >>>>> >> >> >>>> >>> >> handled, which also impose requirements at
>>> >>> >>>>> >> >> >>>> >>> >> link
>>> >>> >>>>> >> >> >>>> >>> >> time
>>> >>> >>>>> >> >> >>>> >>> >> (i.e.,
>>> >>> >>>>> >> >> >>>> >>> >> in
>>> >>> >>>>> >> >> >>>> >>> >> terms
>>> >>> >>>>> >> >> >>>> >>> >> of section alignment, and relative offset
>>> >>> >>>>> >> >> >>>> >>> >> between
>>> >>> >>>>> >> >> >>>> >>> >> sections
>>> >>> >>>>> >> >> >>>> >>> >> both
>>> >>> >>>>> >> >> >>>> >>> >> in
>>> >>> >>>>> >> >> >>>> >>> >> the
>>> >>> >>>>> >> >> >>>> >>> >> ELF and the PE/COFF versions of the image)
>>> >>> >>>>> >> >> >>>> >>> >>
>>> >>> >>>>> >> >> >>>> >>> >> However, the relocation issue was due to the
>>> >>> >>>>> >> >> >>>> >>> >> fact
>>> >>> >>>>> >> >> >>>> >>> >> that you
>>> >>> >>>>> >> >> >>>> >>> >> were
>>> >>> >>>>> >> >> >>>> >>> >> using
>>> >>> >>>>> >> >> >>>> >>> >> the Linux version of the C++ runtime, which
>>> >>> >>>>> >> >> >>>> >>> >> you
>>> >>> >>>>> >> >> >>>> >>> >> cannot use
>>> >>> >>>>> >> >> >>>> >>> >> under
>>> >>> >>>>> >> >> >>>> >>> >> EDK2
>>> >>> >>>>> >> >> >>>> >>> >> even if we do support those relocation types
>>> >>> >>>>> >> >> >>>> >>> >> with
>>> >>> >>>>> >> >> >>>> >>> >> the
>>> >>> >>>>> >> >> >>>> >>> >> newer
>>> >>> >>>>> >> >> >>>> >>> >> tools.
>>> >>> >>>>> >> >> >>>> >>> >>
>>> >>> >>>>> >> >> >>>> >>> >> Bottom line is that you need to develop your
>>> >>> >>>>> >> >> >>>> >>> >> own
>>> >>> >>>>> >> >> >>>> >>> >> C++
>>> >>> >>>>> >> >> >>>> >>> >> minimal
>>> >>> >>>>> >> >> >>>> >>> >> runtime
>>> >>> >>>>> >> >> >>>> >>> >> if you want to run C++ programs under EDK2
>>> >>> >>>>> >> >> >>>> >>> >>
>>> >>> >>>>> >> >> >>>> >>> >> > On Tue, Jan 5, 2016 at 4:29 PM, Ravikanth
>>> >>> >>>>> >> >> >>>> >>> >> > MVR
>>> >>> >>>>> >> >> >>>> >>> >> > <ravikanth.mvr@avagotech.com>
>>> >>> >>>>> >> >> >>>> >>> >> > wrote:
>>> >>> >>>>> >> >> >>>> >>> >> >>
>>> >>> >>>>> >> >> >>>> >>> >> >> +Sada.
>>> >>> >>>>> >> >> >>>> >>> >> >>
>>> >>> >>>>> >> >> >>>> >>> >> >> Thanks.
>>> >>> >>>>> >> >> >>>> >>> >> >>
>>> >>> >>>>> >> >> >>>> >>> >> >> On Wed, Dec 30, 2015 at 8:38 PM, Ard
>>> >>> >>>>> >> >> >>>> >>> >> >> Biesheuvel
>>> >>> >>>>> >> >> >>>> >>> >> >> <ard.biesheuvel@linaro.org> wrote:
>>> >>> >>>>> >> >> >>>> >>> >> >>>
>>> >>> >>>>> >> >> >>>> >>> >> >>> On 30 December 2015 at 16:02, Leif
>>> >>> >>>>> >> >> >>>> >>> >> >>> Lindholm
>>> >>> >>>>> >> >> >>>> >>> >> >>> <leif.lindholm@linaro.org>
>>> >>> >>>>> >> >> >>>> >>> >> >>> wrote:
>>> >>> >>>>> >> >> >>>> >>> >> >>> > Hi Daniel,
>>> >>> >>>>> >> >> >>>> >>> >> >>> >
>>> >>> >>>>> >> >> >>>> >>> >> >>> > Sorry, your email got stuck in my SPAM
>>> >>> >>>>> >> >> >>>> >>> >> >>> > folder
>>> >>> >>>>> >> >> >>>> >>> >> >>> > for
>>> >>> >>>>> >> >> >>>> >>> >> >>> > some
>>> >>> >>>>> >> >> >>>> >>> >> >>> > reason.
>>> >>> >>>>> >> >> >>>> >>> >> >>> >
>>> >>> >>>>> >> >> >>>> >>> >> >>> > On Wed, Dec 23, 2015 at 05:25:21PM
>>> >>> >>>>> >> >> >>>> >>> >> >>> > -0500,
>>> >>> >>>>> >> >> >>>> >>> >> >>> > Daniel
>>> >>> >>>>> >> >> >>>> >>> >> >>> > Samuelraj
>>> >>> >>>>> >> >> >>>> >>> >> >>> > wrote:
>>> >>> >>>>> >> >> >>>> >>> >> >>> >> We are able to compile CPP files for
>>> >>> >>>>> >> >> >>>> >>> >> >>> >> X64
>>> >>> >>>>> >> >> >>>> >>> >> >>> >> using
>>> >>> >>>>> >> >> >>>> >>> >> >>> >> UDK2014
>>> >>> >>>>> >> >> >>>> >>> >> >>> >> by
>>> >>> >>>>> >> >> >>>> >>> >> >>> >> using
>>> >>> >>>>> >> >> >>>> >>> >> >>> >> Visual
>>> >>> >>>>> >> >> >>>> >>> >> >>> >> Studio.
>>> >>> >>>>> >> >> >>>> >>> >> >>> >>
>>> >>> >>>>> >> >> >>>> >>> >> >>> >> How do we compile the same source for
>>> >>> >>>>> >> >> >>>> >>> >> >>> >> AARCH64?
>>> >>> >>>>> >> >> >>>> >>> >> >>>
>>> >>> >>>>> >> >> >>>> >>> >> >>> Do you mean C++? That is completely
>>> >>> >>>>> >> >> >>>> >>> >> >>> unsupported,
>>> >>> >>>>> >> >> >>>> >>> >> >>> and is
>>> >>> >>>>> >> >> >>>> >>> >> >>> going
>>> >>> >>>>> >> >> >>>> >>> >> >>> to
>>> >>> >>>>> >> >> >>>> >>> >> >>> be
>>> >>> >>>>> >> >> >>>> >>> >> >>> quite a challenge to implement. Note that
>>> >>> >>>>> >> >> >>>> >>> >> >>> you
>>> >>> >>>>> >> >> >>>> >>> >> >>> cannot
>>> >>> >>>>> >> >> >>>> >>> >> >>> rely
>>> >>> >>>>> >> >> >>>> >>> >> >>> on
>>> >>> >>>>> >> >> >>>> >>> >> >>> the
>>> >>> >>>>> >> >> >>>> >>> >> >>> C++
>>> >>> >>>>> >> >> >>>> >>> >> >>> runtime for various reasons (including,
>>> >>> >>>>> >> >> >>>> >>> >> >>> but
>>> >>> >>>>> >> >> >>>> >>> >> >>> not
>>> >>> >>>>> >> >> >>>> >>> >> >>> limited
>>> >>> >>>>> >> >> >>>> >>> >> >>> to,
>>> >>> >>>>> >> >> >>>> >>> >> >>> the
>>> >>> >>>>> >> >> >>>> >>> >> >>> fact
>>> >>> >>>>> >> >> >>>> >>> >> >>> that it uses small model relocations, and
>>> >>> >>>>> >> >> >>>> >>> >> >>> is
>>> >>> >>>>> >> >> >>>> >>> >> >>> built
>>> >>> >>>>> >> >> >>>> >>> >> >>> against
>>> >>> >>>>> >> >> >>>> >>> >> >>> libc
>>> >>> >>>>> >> >> >>>> >>> >> >>> on
>>> >>> >>>>> >> >> >>>> >>> >> >>> Linux) I wonder how that even works on
>>> >>> >>>>> >> >> >>>> >>> >> >>> Visual
>>> >>> >>>>> >> >> >>>> >>> >> >>> Studio
>>> >>> >>>>> >> >> >>>> >>> >> >>> for
>>> >>> >>>>> >> >> >>>> >>> >> >>> X64,
>>> >>> >>>>> >> >> >>>> >>> >> >>> since
>>> >>> >>>>> >> >> >>>> >>> >> >>> the code you build will try to call libc
>>> >>> >>>>> >> >> >>>> >>> >> >>> functions from
>>> >>> >>>>> >> >> >>>> >>> >> >>> the
>>> >>> >>>>> >> >> >>>> >>> >> >>> VC
>>> >>> >>>>> >> >> >>>> >>> >> >>> runtime
>>> >>> >>>>> >> >> >>>> >>> >> >>> library.
>>> >>> >>>>> >> >> >>>> >>> >> >>>
>>> >>> >>>>> >> >> >>>> >>> >> >>> There has been some discussion about this
>>> >>> >>>>> >> >> >>>> >>> >> >>> recently on
>>> >>> >>>>> >> >> >>>> >>> >> >>> the
>>> >>> >>>>> >> >> >>>> >>> >> >>> list.
>>> >>> >>>>> >> >> >>>> >>> >> >>> If
>>> >>> >>>>> >> >> >>>> >>> >> >>> you
>>> >>> >>>>> >> >> >>>> >>> >> >>> disable exceptions and RTTI, and
>>> >>> >>>>> >> >> >>>> >>> >> >>> reimplement
>>> >>> >>>>> >> >> >>>> >>> >> >>> your
>>> >>> >>>>> >> >> >>>> >>> >> >>> new
>>> >>> >>>>> >> >> >>>> >>> >> >>> and
>>> >>> >>>>> >> >> >>>> >>> >> >>> delete
>>> >>> >>>>> >> >> >>>> >>> >> >>> operators, you may be able to build code
>>> >>> >>>>> >> >> >>>> >>> >> >>> that
>>> >>> >>>>> >> >> >>>> >>> >> >>> does not
>>> >>> >>>>> >> >> >>>> >>> >> >>> rely
>>> >>> >>>>> >> >> >>>> >>> >> >>> on
>>> >>> >>>>> >> >> >>>> >>> >> >>> advanced C++ runtime features.
>>> >>> >>>>> >> >> >>>> >>> >> >>>
>>> >>> >>>>> >> >> >>>> >>> >> >>> --
>>> >>> >>>>> >> >> >>>> >>> >> >>> Ard.
>>> >>> >>>>> >> >> >>>> >>> >> >>
>>> >>> >>>>> >> >> >>>> >>> >> >>
>>> >>> >>>>> >> >> >>>> >>> >> >
>>> >>> >>>>> >> >> >>>> >>> >
>>> >>> >>>>> >> >> >>>> >>> >
>>> >>> >>>>> >> >> >>>> >>
>>> >>> >>>>> >> >> >>>> >>
>>> >>> >>>>> >> >> >>>> >
>>> >>> >>>>> >> >> >>>
>>> >>> >>>>> >> >> >>>
>>> >>> >>>>> >> >
>>> >>> >>>>> >> >
>>> >>> >>>>> >
>>> >>> >>>>> >
>>> >>> >>>>
>>> >>> >>>>
>>> >>> >>>
>>> >>> >>
>>> >>> >
>>> >>
>>> >>
>>> >
>>
>>
>