Reviewed-by: Ruiyu Ni ruiyu.ni@intel.com
-----Original Message----- From: edk2-devel [mailto:edk2-devel-bounces@lists.01.org] On Behalf Of Zeng, Star Sent: Thursday, March 22, 2018 4:39 PM To: Ming Huang ming.huang@linaro.org; linaro-uefi@lists.linaro.org; edk2- devel@lists.01.org Cc: Zeng, Star star.zeng@intel.com; huangming23@huawei.com; Dong, Eric eric.dong@intel.com; ard.biesheuvel@linaro.org; zhangjinsong2@huawei.com; leif.lindholm@linaro.org; mengfanrong@huawei.com; guoheyi@huawei.com; Gao, Liming liming.gao@intel.com; Kinney, Michael D michael.d.kinney@intel.com; waip23@126.com; wanghuiqiang@huawei.com; huangdaode@hisilicon.com Subject: Re: [edk2] [MdeModulePkg/Usb v2 1/1] MdeModulePkg/Usb: Replace macro USB_BOOT_IO_BLOCKS
Reviewed-by: Star Zeng star.zeng@intel.com
Thanks, Star -----Original Message----- From: Ming Huang [mailto:ming.huang@linaro.org] Sent: Thursday, March 22, 2018 3:44 PM To: linaro-uefi@lists.linaro.org; edk2-devel@lists.01.org Cc: Zeng, Star star.zeng@intel.com; Dong, Eric eric.dong@intel.com; Kinney, Michael D michael.d.kinney@intel.com; Gao, Liming liming.gao@intel.com; leif.lindholm@linaro.org; ard.biesheuvel@linaro.org; guoheyi@huawei.com; wanghuiqiang@huawei.com; huangming23@huawei.com; zhangjinsong2@huawei.com; mengfanrong@huawei.com; huangdaode@hisilicon.com; waip23@126.com; Ming Huang ming.huang@linaro.org Subject: [MdeModulePkg/Usb v2 1/1] MdeModulePkg/Usb: Replace macro USB_BOOT_IO_BLOCKS
Booting from USB may fail while the macro USB_BOOT_IO_BLOCKS set to 128 because the block size of some USB devices are exceeded 512, like some virtual CD-ROM from BMC, the block size is 2048. So,the count blocks to transfer should be calculated by block size of the USB devices.
Contributed-under: TianoCore Contribution Agreement 1.1 Signed-off-by: Ming Huang ming.huang@linaro.org
MdeModulePkg/Bus/Usb/UsbMassStorageDxe/UsbMassBoot.c | 16 ++++++++++++---- MdeModulePkg/Bus/Usb/UsbMassStorageDxe/UsbMassBoot.h | 4 ++-- 2 files changed, 14 insertions(+), 6 deletions(-)
diff --git a/MdeModulePkg/Bus/Usb/UsbMassStorageDxe/UsbMassBoot.c b/MdeModulePkg/Bus/Usb/UsbMassStorageDxe/UsbMassBoot.c index b84bfd2d7290..3bf6e6a81f3c 100644 --- a/MdeModulePkg/Bus/Usb/UsbMassStorageDxe/UsbMassBoot.c +++ b/MdeModulePkg/Bus/Usb/UsbMassStorageDxe/UsbMassBoot.c @@ -814,11 +814,13 @@ UsbBootReadBlocks ( USB_BOOT_READ10_CMD ReadCmd; EFI_STATUS Status; UINT16 Count;
UINT16 CountMax; UINT32 BlockSize; UINT32 ByteSize; UINT32 Timeout;
BlockSize = UsbMass->BlockIoMedia.BlockSize;
CountMax = (UINT16)(USB_BOOT_MAX_CARRY_SIZE / BlockSize); Status = EFI_SUCCESS;
while (TotalBlock > 0) {
@@ -827,7 +829,7 @@ UsbBootReadBlocks ( // on the device. We must split the total block because the READ10 // command only has 16 bit transfer length (in the unit of block). //
- Count = (UINT16)((TotalBlock < USB_BOOT_IO_BLOCKS) ? TotalBlock :
USB_BOOT_IO_BLOCKS);
Count = (UINT16)((TotalBlock < CountMax) ? TotalBlock : CountMax); ByteSize = (UINT32)Count * BlockSize;
//
@@ -890,11 +892,13 @@ UsbBootWriteBlocks ( USB_BOOT_WRITE10_CMD WriteCmd; EFI_STATUS Status; UINT16 Count;
UINT16 CountMax; UINT32 BlockSize; UINT32 ByteSize; UINT32 Timeout;
BlockSize = UsbMass->BlockIoMedia.BlockSize;
CountMax = (UINT16)(USB_BOOT_MAX_CARRY_SIZE / BlockSize); Status = EFI_SUCCESS;
while (TotalBlock > 0) {
@@ -903,7 +907,7 @@ UsbBootWriteBlocks ( // on the device. We must split the total block because the WRITE10 // command only has 16 bit transfer length (in the unit of block). //
- Count = (UINT16)((TotalBlock < USB_BOOT_IO_BLOCKS) ? TotalBlock :
USB_BOOT_IO_BLOCKS);
Count = (UINT16)((TotalBlock < CountMax) ? TotalBlock : CountMax); ByteSize = (UINT32)Count * BlockSize;
//
@@ -966,18 +970,20 @@ UsbBootReadBlocks16 ( UINT8 ReadCmd[16]; EFI_STATUS Status; UINT16 Count;
UINT16 CountMax; UINT32 BlockSize; UINT32 ByteSize; UINT32 Timeout;
BlockSize = UsbMass->BlockIoMedia.BlockSize;
CountMax = (UINT16)(USB_BOOT_MAX_CARRY_SIZE / BlockSize); Status = EFI_SUCCESS;
while (TotalBlock > 0) { // // Split the total blocks into smaller pieces. //
- Count = (UINT16)((TotalBlock < USB_BOOT_IO_BLOCKS) ? TotalBlock :
USB_BOOT_IO_BLOCKS);
Count = (UINT16)((TotalBlock < CountMax) ? TotalBlock : CountMax); ByteSize = (UINT32)Count * BlockSize;
//
@@ -1040,18 +1046,20 @@ UsbBootWriteBlocks16 ( UINT8 WriteCmd[16]; EFI_STATUS Status; UINT16 Count;
UINT16 CountMax; UINT32 BlockSize; UINT32 ByteSize; UINT32 Timeout;
BlockSize = UsbMass->BlockIoMedia.BlockSize;
CountMax = (UINT16)(USB_BOOT_MAX_CARRY_SIZE / BlockSize); Status = EFI_SUCCESS;
while (TotalBlock > 0) { // // Split the total blocks into smaller pieces. //
- Count = (UINT16)((TotalBlock < USB_BOOT_IO_BLOCKS) ? TotalBlock :
USB_BOOT_IO_BLOCKS);
Count = (UINT16)((TotalBlock < CountMax) ? TotalBlock : CountMax); ByteSize = (UINT32)Count * BlockSize;
//
diff --git a/MdeModulePkg/Bus/Usb/UsbMassStorageDxe/UsbMassBoot.h b/MdeModulePkg/Bus/Usb/UsbMassStorageDxe/UsbMassBoot.h index 13a926035ceb..f8a0708350c7 100644 --- a/MdeModulePkg/Bus/Usb/UsbMassStorageDxe/UsbMassBoot.h +++ b/MdeModulePkg/Bus/Usb/UsbMassStorageDxe/UsbMassBoot.h @@ -65,9 +65,9 @@ WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. #define USB_PDT_SIMPLE_DIRECT 0x0E ///< Simplified direct access device
// -// Other parameters, Max carried size is 512B * 128 = 64KB +// Other parameters, Max carried size is 64KB. // -#define USB_BOOT_IO_BLOCKS 128 +#define USB_BOOT_MAX_CARRY_SIZE SIZE_64KB
// // Retry mass command times, set by experience -- 1.9.1
edk2-devel mailing list edk2-devel@lists.01.org https://lists.01.org/mailman/listinfo/edk2-devel