Enable virtual keyboard on HiKey960 platform. The platform driver read pattern from memory or GPIO pin. When the value is matched, it simulates a hotkey that is used to adjust sequence of boot options.
Contributed-under: TianoCore Contribution Agreement 1.1 Signed-off-by: Haojian Zhuang haojian.zhuang@linaro.org --- Platform/Hisilicon/HiKey960/HiKey960.dsc | 10 + Platform/Hisilicon/HiKey960/HiKey960.fdf | 7 + .../Hisilicon/HiKey960/HiKey960Dxe/HiKey960Dxe.c | 491 +++++++++++++++++++++ .../Hisilicon/HiKey960/HiKey960Dxe/HiKey960Dxe.inf | 55 +++ Silicon/Hisilicon/Hi3660/Include/Hi3660.h | 147 ++++++ Silicon/Hisilicon/Hi3660/Include/Hkadc.h | 66 +++ 6 files changed, 776 insertions(+) create mode 100644 Platform/Hisilicon/HiKey960/HiKey960Dxe/HiKey960Dxe.c create mode 100644 Platform/Hisilicon/HiKey960/HiKey960Dxe/HiKey960Dxe.inf create mode 100644 Silicon/Hisilicon/Hi3660/Include/Hi3660.h create mode 100644 Silicon/Hisilicon/Hi3660/Include/Hkadc.h
diff --git a/Platform/Hisilicon/HiKey960/HiKey960.dsc b/Platform/Hisilicon/HiKey960/HiKey960.dsc index 0316e2d..082e12b 100644 --- a/Platform/Hisilicon/HiKey960/HiKey960.dsc +++ b/Platform/Hisilicon/HiKey960/HiKey960.dsc @@ -68,6 +68,9 @@ PlatformPeiLib|ArmPlatformPkg/PlatformPei/PlatformPeiLib.inf PrePiHobListPointerLib|ArmPlatformPkg/Library/PrePiHobListPointerLib/PrePiHobListPointerLib.inf
+[BuildOptions] + GCC:*_*_*_PLATFORM_FLAGS = -I$(WORKSPACE)/Silicon/Hisilicon/Hi3660/Include + ################################################################################ # # Pcd Section - list of all EDK II PCD Entries defined by this Platform @@ -186,6 +189,13 @@ ArmPlatformPkg/Drivers/PL061GpioDxe/PL061GpioDxe.inf
# + # Virtual Keyboard + # + EmbeddedPkg/Drivers/VirtualKeyboardDxe/VirtualKeyboardDxe.inf + + Platform/Hisilicon/HiKey960/HiKey960Dxe/HiKey960Dxe.inf + + # # USB Host Support # MdeModulePkg/Bus/Usb/UsbBusDxe/UsbBusDxe.inf diff --git a/Platform/Hisilicon/HiKey960/HiKey960.fdf b/Platform/Hisilicon/HiKey960/HiKey960.fdf index f67ed72..fa8e145 100644 --- a/Platform/Hisilicon/HiKey960/HiKey960.fdf +++ b/Platform/Hisilicon/HiKey960/HiKey960.fdf @@ -361,6 +361,13 @@ READ_LOCK_STATUS = TRUE INF ArmPlatformPkg/Drivers/PL061GpioDxe/PL061GpioDxe.inf
# + # Virtual Keyboard + # + INF EmbeddedPkg/Drivers/VirtualKeyboardDxe/VirtualKeyboardDxe.inf + + INF Platform/Hisilicon/HiKey960/HiKey960Dxe/HiKey960Dxe.inf + + # # USB Host Support # INF MdeModulePkg/Bus/Usb/UsbBusDxe/UsbBusDxe.inf diff --git a/Platform/Hisilicon/HiKey960/HiKey960Dxe/HiKey960Dxe.c b/Platform/Hisilicon/HiKey960/HiKey960Dxe/HiKey960Dxe.c new file mode 100644 index 0000000..473d61e --- /dev/null +++ b/Platform/Hisilicon/HiKey960/HiKey960Dxe/HiKey960Dxe.c @@ -0,0 +1,491 @@ +/** @file +* +* Copyright (c) 2018, Linaro Ltd. All rights reserved. +* +* This program and the accompanying materials +* are licensed and made available under the terms and conditions of the BSD License +* which accompanies this distribution. The full text of the license may be found at +* http://opensource.org/licenses/bsd-license.php +* +* THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, +* WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. +* +**/ + +#include <Guid/EventGroup.h> + +#include <Hi3660.h> +#include <Hkadc.h> +#include <libfdt.h> + +#include <Library/BaseLib.h> +#include <Library/BaseMemoryLib.h> +#include <Library/CacheMaintenanceLib.h> +#include <Library/DebugLib.h> +#include <Library/DevicePathLib.h> +#include <Library/MemoryAllocationLib.h> +#include <Library/NonDiscoverableDeviceRegistrationLib.h> +#include <Library/IoLib.h> +#include <Library/PcdLib.h> +#include <Library/PrintLib.h> +#include <Library/SerialPortLib.h> +#include <Library/TimerLib.h> +#include <Library/UefiBootServicesTableLib.h> +#include <Library/UefiRuntimeServicesTableLib.h> + +#include <Protocol/EmbeddedGpio.h> +#include <Protocol/PlatformVirtualKeyboard.h> + +#define ADC_ADCIN0 0 +#define ADC_ADCIN1 1 +#define ADC_ADCIN2 2 + +#define HKADC_DATA_GRADE0 0 +#define HKADC_DATA_GRADE1 100 +#define HKADC_DATA_GRADE2 300 +#define HKADC_DATA_GRADE3 500 +#define HKADC_DATA_GRADE4 700 +#define HKADC_DATA_GRADE5 900 +#define HKADC_DATA_GRADE6 1100 +#define HKADC_DATA_GRADE7 1300 +#define HKADC_DATA_GRADE8 1500 +#define HKADC_DATA_GRADE9 1700 +#define HKADC_DATA_GRADE10 1800 + +#define BOARDID_VALUE0 0 +#define BOARDID_VALUE1 1 +#define BOARDID_VALUE2 2 +#define BOARDID_VALUE3 3 +#define BOARDID_VALUE4 4 +#define BOARDID_VALUE5 5 +#define BOARDID_VALUE6 6 +#define BOARDID_VALUE7 7 +#define BOARDID_VALUE8 8 +#define BOARDID_VALUE9 9 +#define BOARDID_UNKNOW 0xF + +#define BOARDID3_BASE 5 + +#define HIKEY960_BOARDID_V1 5300 +#define HIKEY960_BOARDID_V2 5301 + +#define HIKEY960_COMPATIBLE_LEDS_V1 "gpio-leds_v1" +#define HIKEY960_COMPATIBLE_LEDS_V2 "gpio-leds_v2" +#define HIKEY960_COMPATIBLE_HUB_V1 "hisilicon,gpio_hubv1" +#define HIKEY960_COMPATIBLE_HUB_V2 "hisilicon,gpio_hubv2" + +#define SERIAL_NUMBER_SIZE 17 +#define SERIAL_NUMBER_BLOCK_SIZE EFI_PAGE_SIZE +#define SERIAL_NUMBER_LBA 20 +#define RANDOM_MAX 0x7FFFFFFFFFFFFFFF +#define RANDOM_MAGIC 0x9A4DBEAF + +#define ADB_REBOOT_ADDRESS 0x32100000 +#define ADB_REBOOT_BOOTLOADER 0x77665500 +#define ADB_REBOOT_NONE 0x77665501 + +#define DETECT_SW_FASTBOOT 68 // GPIO8_4 + +typedef struct { + UINT64 Magic; + UINT64 Data; + CHAR16 UnicodeSN[SERIAL_NUMBER_SIZE]; +} RANDOM_SERIAL_NUMBER; + +enum { + BOOT_MODE_RECOVERY = 0, + BOOT_MODE_NORMAL, + BOOT_MODE_MASK = 1, +}; + +STATIC UINTN mBoardId; + +STATIC EMBEDDED_GPIO *mGpio; + +STATIC +VOID +InitAdc ( + VOID + ) +{ + // reset hkadc + MmioWrite32 (CRG_PERRSTEN2, PERRSTEN2_HKADCSSI); + // wait a few clock cycles + MicroSecondDelay (2); + MmioWrite32 (CRG_PERRSTDIS2, PERRSTEN2_HKADCSSI); + MicroSecondDelay (2); + // enable hkadc clock + MmioWrite32 (CRG_PERDIS2, PEREN2_HKADCSSI); + MicroSecondDelay (2); + MmioWrite32 (CRG_PEREN2, PEREN2_HKADCSSI); + MicroSecondDelay (2); +} + +STATIC +EFI_STATUS +AdcGetAdc ( + IN UINTN Channel, + OUT UINTN *Value + ) +{ + UINT32 Data; + UINT16 Value1, Value0; + + if (Channel > HKADC_CHANNEL_MAX) { + DEBUG ((DEBUG_ERROR, "invalid channel:%d\n", Channel)); + return EFI_OUT_OF_RESOURCES; + } + // configure the read/write operation for external HKADC + MmioWrite32 (HKADC_WR01_DATA, HKADC_WR01_VALUE | Channel); + MmioWrite32 (HKADC_WR23_DATA, HKADC_WR23_VALUE); + MmioWrite32 (HKADC_WR45_DATA, HKADC_WR45_VALUE); + // configure the number of accessing registers + MmioWrite32 (HKADC_WR_NUM, HKADC_WR_NUM_VALUE); + // configure delay of accessing registers + MmioWrite32 (HKADC_DELAY01, HKADC_CHANNEL0_DELAY01_VALUE); + MmioWrite32 (HKADC_DELAY23, HKADC_DELAY23_VALUE); + + // start HKADC + MmioWrite32 (HKADC_DSP_START, 1); + do { + Data = MmioRead32 (HKADC_DSP_START); + } while (Data & 1); + + // convert AD result + Value1 = (UINT16)MmioRead32 (HKADC_DSP_RD2_DATA); + Value0 = (UINT16)MmioRead32 (HKADC_DSP_RD3_DATA); + + Data = ((Value1 << 4) & HKADC_VALUE_HIGH) | ((Value0 >> 4) & HKADC_VALUE_LOW); + *Value = Data; + return EFI_SUCCESS; +} + +STATIC +EFI_STATUS +AdcGetValue ( + IN UINTN Channel, + IN OUT UINTN *Value + ) +{ + EFI_STATUS Status; + UINTN Result; + + Status = AdcGetAdc (Channel, Value); + if (EFI_ERROR (Status)) { + return Status; + } + + // convert ADC value to micro-volt + Result = ((*Value & HKADC_VALID_VALUE) * HKADC_VREF_1V8) / HKADC_ACCURACY; + *Value = Result; + return EFI_SUCCESS; +} + +STATIC +UINTN +AdcinDataRemap ( + IN UINTN AdcinValue + ) +{ + UINTN Result; + + if (AdcinValue < HKADC_DATA_GRADE0) { + Result = BOARDID_UNKNOW; + } else if (AdcinValue < HKADC_DATA_GRADE1) { + Result = BOARDID_VALUE0; + } else if (AdcinValue < HKADC_DATA_GRADE2) { + Result = BOARDID_VALUE1; + } else if (AdcinValue < HKADC_DATA_GRADE3) { + Result = BOARDID_VALUE2; + } else if (AdcinValue < HKADC_DATA_GRADE4) { + Result = BOARDID_VALUE3; + } else if (AdcinValue < HKADC_DATA_GRADE5) { + Result = BOARDID_VALUE4; + } else if (AdcinValue < HKADC_DATA_GRADE6) { + Result = BOARDID_VALUE5; + } else if (AdcinValue < HKADC_DATA_GRADE7) { + Result = BOARDID_VALUE6; + } else if (AdcinValue < HKADC_DATA_GRADE8) { + Result = BOARDID_VALUE7; + } else if (AdcinValue < HKADC_DATA_GRADE9) { + Result = BOARDID_VALUE8; + } else if (AdcinValue < HKADC_DATA_GRADE10) { + Result = BOARDID_VALUE9; + } else { + Result = BOARDID_UNKNOW; + } + return Result; +} + +STATIC +EFI_STATUS +InitBoardId ( + OUT UINTN *Id + ) +{ + UINTN Adcin0, Adcin1, Adcin2; + UINTN Adcin0Remap, Adcin1Remap, Adcin2Remap; + + InitAdc (); + + // read ADC channel0 data + AdcGetValue (ADC_ADCIN0, &Adcin0); + DEBUG ((DEBUG_INFO, "[BDID]Adcin0:%d\n", Adcin0)); + Adcin0Remap = AdcinDataRemap (Adcin0); + DEBUG ((DEBUG_INFO, "[BDID]Adcin0Remap:%d\n", Adcin0Remap)); + if (Adcin0Remap == BOARDID_UNKNOW) { + return EFI_INVALID_PARAMETER; + } + // read ADC channel1 data + AdcGetValue (ADC_ADCIN1, &Adcin1); + DEBUG ((DEBUG_INFO, "[BDID]Adcin1:%d\n", Adcin1)); + Adcin1Remap = AdcinDataRemap (Adcin1); + DEBUG ((DEBUG_INFO, "[BDID]Adcin1Remap:%d\n", Adcin1Remap)); + if (Adcin1Remap == BOARDID_UNKNOW) { + return EFI_INVALID_PARAMETER; + } + // read ADC channel2 data + AdcGetValue (ADC_ADCIN2, &Adcin2); + DEBUG ((DEBUG_INFO, "[BDID]Adcin2:%d\n", Adcin2)); + Adcin2Remap = AdcinDataRemap (Adcin2); + DEBUG ((DEBUG_INFO, "[BDID]Adcin2Remap:%d\n", Adcin2Remap)); + if (Adcin2Remap == BOARDID_UNKNOW) { + return EFI_INVALID_PARAMETER; + } + *Id = BOARDID3_BASE * 1000 + (Adcin2Remap * 100) + (Adcin1Remap * 10) + Adcin0Remap; + DEBUG ((DEBUG_INFO, "[BDID]boardid: %d\n", *Id)); + return EFI_SUCCESS; +} + +STATIC +VOID +InitSdCard ( + IN VOID + ) +{ + UINT32 Data; + + // LDO16 + Data = MmioRead32 (PMU_REG_BASE + (0x79 << 2)) & 7; + Data |= 6; + MmioWrite32 (PMU_REG_BASE + (0x79 << 2), Data); + MmioOr32 (PMU_REG_BASE + (0x78 << 2), 2); + MicroSecondDelay (100); + + // LDO9 + Data = MmioRead32 (PMU_REG_BASE + (0x6b << 2)) & 7; + Data |= 5; + MmioWrite32 (PMU_REG_BASE + (0x6b << 2), Data); + MmioOr32 (PMU_REG_BASE + (0x6a << 2), 2); + MicroSecondDelay (100); + + // GPIO203 + MmioWrite32 (0xfff11000 + (24 << 2), 0); // GPIO function + + // SD pinmux + MmioWrite32 (0xff37e000 + 0x0, 1); // SD_CLK + MmioWrite32 (0xff37e000 + 0x4, 1); // SD_CMD + MmioWrite32 (0xff37e000 + 0x8, 1); // SD_DATA0 + MmioWrite32 (0xff37e000 + 0xc, 1); // SD_DATA1 + MmioWrite32 (0xff37e000 + 0x10, 1); // SD_DATA2 + MmioWrite32 (0xff37e000 + 0x14, 1); // SD_DATA3 + MmioWrite32 (0xff37e800 + 0x0, 15 << 4); // SD_CLK float with 32mA + MmioWrite32 (0xff37e800 + 0x4, (1 << 0) | (8 << 4)); // SD_CMD + MmioWrite32 (0xff37e800 + 0x8, (1 << 0) | (8 << 4)); // SD_DATA0 + MmioWrite32 (0xff37e800 + 0xc, (1 << 0) | (8 << 4)); // SD_DATA1 + MmioWrite32 (0xff37e800 + 0x10, (1 << 0) | (8 << 4)); // SD_DATA2 + MmioWrite32 (0xff37e800 + 0x14, (1 << 0) | (8 << 4)); // SD_DATA3 + + do { + MmioOr32 (CRG_REG_BASE + 0xb8, (1 << 6) | (1 << 6 << 16) | (0 << 4) | (3 << 4 << 16)); + Data = MmioRead32 (CRG_REG_BASE + 0xb8); + } while ((Data & ((1 << 6) | (3 << 4))) != ((1 << 6) | (0 << 4))); + + // Unreset SD controller + MmioWrite32 (CRG_PERRSTDIS4, 1 << 18); + do { + Data = MmioRead32 (CRG_PERRSTSTAT4); + } while ((Data & (1 << 18)) == (1 << 18)); + // Enable SD controller clock + MmioOr32 (CRG_REG_BASE + 0, 1 << 30); + MmioOr32 (CRG_REG_BASE + 0x40, 1 << 17); + do { + Data = MmioRead32 (CRG_REG_BASE + 0x48); + } while ((Data & (1 << 17)) != (1 << 17)); +} + +VOID +InitPeripherals ( + IN VOID + ) +{ + // Enable FPLL0 + MmioOr32 (SCTRL_SCFPLLCTRL0, SCTRL_SCFPLLCTRL0_FPLL0_EN); + + InitSdCard (); + + // Enable wifi clock + MmioOr32 (PMIC_HARDWARE_CTRL0, PMIC_HARDWARE_CTRL0_WIFI_CLK); + MmioOr32 (PMIC_OSC32K_ONOFF_CTRL, PMIC_OSC32K_ONOFF_CTRL_EN_32K); +} + +/** + Notification function of the event defined as belonging to the + EFI_END_OF_DXE_EVENT_GROUP_GUID event group that was created in + the entry point of the driver. + + This function is called when an event belonging to the + EFI_END_OF_DXE_EVENT_GROUP_GUID event group is signalled. Such an + event is signalled once at the end of the dispatching of all + drivers (end of the so called DXE phase). + + @param[in] Event Event declared in the entry point of the driver whose + notification function is being invoked. + @param[in] Context NULL +**/ +STATIC +VOID +OnEndOfDxe ( + IN EFI_EVENT Event, + IN VOID *Context + ) +{ + UINT32 BootMode; + + BootMode = MmioRead32 (SCTRL_BAK_DATA0) & BOOT_MODE_MASK; + if (BootMode == BOOT_MODE_RECOVERY) { + SerialPortWrite ((UINT8 *)"WARNING: CAN NOT BOOT KERNEL IN RECOVERY MODE!\r\n", 48); + SerialPortWrite ((UINT8 *)"Switch to normal boot mode, then reboot to boot kernel.\r\n", 57); + } +} + +EFI_STATUS +EFIAPI +VirtualKeyboardRegister ( + IN VOID + ) +{ + EFI_STATUS Status; + + Status = gBS->LocateProtocol ( + &gEmbeddedGpioProtocolGuid, + NULL, + (VOID **) &mGpio + ); + if (EFI_ERROR (Status)) { + return Status; + } + return EFI_SUCCESS; +} + +EFI_STATUS +EFIAPI +VirtualKeyboardReset ( + IN VOID + ) +{ + EFI_STATUS Status; + + if (mGpio == NULL) { + return EFI_INVALID_PARAMETER; + } + // Configure GPIO68 as GPIO function + MmioWrite32 (0xe896c108, 0); + Status = mGpio->Set (mGpio, DETECT_SW_FASTBOOT, GPIO_MODE_INPUT); + return Status; +} + +BOOLEAN +EFIAPI +VirtualKeyboardQuery ( + IN VIRTUAL_KBD_KEY *VirtualKey + ) +{ + EFI_STATUS Status; + UINTN Value = 0; + + if ((VirtualKey == NULL) || (mGpio == NULL)) { + return FALSE; + } + if (MmioRead32 (ADB_REBOOT_ADDRESS) == ADB_REBOOT_BOOTLOADER) { + goto Done; + } else { + Status = mGpio->Get (mGpio, DETECT_SW_FASTBOOT, &Value); + if (EFI_ERROR (Status) || (Value != 0)) { + return FALSE; + } + } +Done: + VirtualKey->Signature = VIRTUAL_KEYBOARD_KEY_SIGNATURE; + VirtualKey->Key.ScanCode = SCAN_NULL; + VirtualKey->Key.UnicodeChar = L'f'; + return TRUE; +} + +EFI_STATUS +EFIAPI +VirtualKeyboardClear ( + IN VIRTUAL_KBD_KEY *VirtualKey + ) +{ + if (VirtualKey == NULL) { + return EFI_INVALID_PARAMETER; + } + if (MmioRead32 (ADB_REBOOT_ADDRESS) == ADB_REBOOT_BOOTLOADER) { + MmioWrite32 (ADB_REBOOT_ADDRESS, ADB_REBOOT_NONE); + WriteBackInvalidateDataCacheRange ((VOID *)ADB_REBOOT_ADDRESS, 4); + } + return EFI_SUCCESS; +} + +PLATFORM_VIRTUAL_KBD_PROTOCOL mVirtualKeyboard = { + VirtualKeyboardRegister, + VirtualKeyboardReset, + VirtualKeyboardQuery, + VirtualKeyboardClear +}; + +EFI_STATUS +EFIAPI +HiKey960EntryPoint ( + IN EFI_HANDLE ImageHandle, + IN EFI_SYSTEM_TABLE *SystemTable + ) +{ + EFI_STATUS Status; + EFI_EVENT EndOfDxeEvent; + + Status = InitBoardId (&mBoardId); + if (EFI_ERROR (Status)) { + return Status; + } + + InitPeripherals (); + + // + // Create an event belonging to the "gEfiEndOfDxeEventGroupGuid" group. + // The "OnEndOfDxe()" function is declared as the call back function. + // It will be called at the end of the DXE phase when an event of the + // same group is signalled to inform about the end of the DXE phase. + // Install the INSTALL_FDT_PROTOCOL protocol. + // + Status = gBS->CreateEventEx ( + EVT_NOTIFY_SIGNAL, + TPL_CALLBACK, + OnEndOfDxe, + NULL, + &gEfiEndOfDxeEventGroupGuid, + &EndOfDxeEvent + ); + if (EFI_ERROR (Status)) { + return Status; + } + + Status = gBS->InstallProtocolInterface ( + &ImageHandle, + &gPlatformVirtualKeyboardProtocolGuid, + EFI_NATIVE_INTERFACE, + &mVirtualKeyboard + ); + return Status; +} diff --git a/Platform/Hisilicon/HiKey960/HiKey960Dxe/HiKey960Dxe.inf b/Platform/Hisilicon/HiKey960/HiKey960Dxe/HiKey960Dxe.inf new file mode 100644 index 0000000..41fab65 --- /dev/null +++ b/Platform/Hisilicon/HiKey960/HiKey960Dxe/HiKey960Dxe.inf @@ -0,0 +1,55 @@ +# +# Copyright (c) 2018, Linaro Limited. All rights reserved. +# +# This program and the accompanying materials +# are licensed and made available under the terms and conditions of the BSD License +# which accompanies this distribution. The full text of the license may be found at +# http://opensource.org/licenses/bsd-license.php +# +# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, +# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. +# + +[Defines] + INF_VERSION = 0x00010019 + BASE_NAME = HiKey960Dxe + FILE_GUID = 6d824b2c-640e-4643-b9f2-9c09e8bff429 + MODULE_TYPE = DXE_DRIVER + VERSION_STRING = 1.0 + ENTRY_POINT = HiKey960EntryPoint + +[Sources.common] + HiKey960Dxe.c + +[Packages] + EmbeddedPkg/Drivers/VirtualKeyboardDxe/VirtualKeyboardDxe.dec + EmbeddedPkg/EmbeddedPkg.dec + MdePkg/MdePkg.dec + MdeModulePkg/MdeModulePkg.dec + +[LibraryClasses] + BaseMemoryLib + CacheMaintenanceLib + DebugLib + DxeServicesTableLib + FdtLib + IoLib + PcdLib + PrintLib + SerialPortLib + TimerLib + UefiBootServicesTableLib + UefiDriverEntryPoint + UefiLib + UefiRuntimeServicesTableLib + +[Protocols] + gEmbeddedGpioProtocolGuid + gPlatformVirtualKeyboardProtocolGuid + +[Guids] + gEfiEndOfDxeEventGroupGuid + gEfiFileInfoGuid + +[Depex] + TRUE diff --git a/Silicon/Hisilicon/Hi3660/Include/Hi3660.h b/Silicon/Hisilicon/Hi3660/Include/Hi3660.h new file mode 100644 index 0000000..f3ce12f --- /dev/null +++ b/Silicon/Hisilicon/Hi3660/Include/Hi3660.h @@ -0,0 +1,147 @@ +/** @file +* +* Copyright (c) 2018, Linaro Ltd. All rights reserved. +* +* This program and the accompanying materials +* are licensed and made available under the terms and conditions of the BSD License +* which accompanies this distribution. The full text of the license may be found at +* http://opensource.org/licenses/bsd-license.php +* +* THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, +* WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. +* +**/ + +#ifndef __HI3660_H__ +#define __HI3660_H__ + +#define HKADC_SSI_REG_BASE 0xE82B8000 + +#define PCTRL_REG_BASE 0xE8A09000 + +#define PCTRL_CTRL3 (PCTRL_REG_BASE + 0x010) +#define PCTRL_CTRL24 (PCTRL_REG_BASE + 0x064) + +#define PCTRL_CTRL3_USB_TXCO_EN (1 << 1) +#define PCTRL_CTRL24_USB3PHY_3MUX1_SEL (1 << 25) + +#define SCTRL_REG_BASE 0xFFF0A000 + +#define SCTRL_SCFPLLCTRL0 (SCTRL_REG_BASE + 0x120) +#define SCTRL_SCFPLLCTRL0_FPLL0_EN (1 << 0) + +#define SCTRL_BAK_DATA0 (SCTRL_REG_BASE + 0x40C) + +#define USB3OTG_BC_REG_BASE 0xFF200000 + +#define USB3OTG_CTRL0 (USB3OTG_BC_REG_BASE + 0x000) +#define USB3OTG_CTRL2 (USB3OTG_BC_REG_BASE + 0x008) +#define USB3OTG_CTRL3 (USB3OTG_BC_REG_BASE + 0x00C) +#define USB3OTG_CTRL4 (USB3OTG_BC_REG_BASE + 0x010) +#define USB3OTG_CTRL6 (USB3OTG_BC_REG_BASE + 0x018) +#define USB3OTG_CTRL7 (USB3OTG_BC_REG_BASE + 0x01C) +#define USB3OTG_PHY_CR_STS (USB3OTG_BC_REG_BASE + 0x050) +#define USB3OTG_PHY_CR_CTRL (USB3OTG_BC_REG_BASE + 0x054) + +#define USB3OTG_CTRL0_SC_USB3PHY_ABB_GT_EN (1 << 15) +#define USB3OTG_CTRL2_TEST_POWERDOWN_SSP (1 << 1) +#define USB3OTG_CTRL2_TEST_POWERDOWN_HSP (1 << 0) +#define USB3OTG_CTRL3_VBUSVLDEXT (1 << 6) +#define USB3OTG_CTRL3_VBUSVLDEXTSEL (1 << 5) +#define USB3OTG_CTRL7_REF_SSP_EN (1 << 16) +#define USB3OTG_PHY_CR_DATA_OUT(x) (((x) & 0xFFFF) << 1) +#define USB3OTG_PHY_CR_ACK (1 << 0) +#define USB3OTG_PHY_CR_DATA_IN(x) (((x) & 0xFFFF) << 4) +#define USB3OTG_PHY_CR_WRITE (1 << 3) +#define USB3OTG_PHY_CR_READ (1 << 2) +#define USB3OTG_PHY_CR_CAP_DATA (1 << 1) +#define USB3OTG_PHY_CR_CAP_ADDR (1 << 0) + +#define PMU_REG_BASE 0xFFF34000 +#define PMIC_HARDWARE_CTRL0 (PMU_REG_BASE + (0x0C5 << 2)) +#define PMIC_OSC32K_ONOFF_CTRL (PMU_REG_BASE + (0x0CC << 2)) + +#define PMIC_HARDWARE_CTRL0_WIFI_CLK (1 << 5) +#define PMIC_OSC32K_ONOFF_CTRL_EN_32K (1 << 1) + + +#define CRG_REG_BASE 0xFFF35000 + +#define CRG_PEREN2 (CRG_REG_BASE + 0x020) +#define CRG_PERDIS2 (CRG_REG_BASE + 0x024) +#define CRG_PERCLKEN2 (CRG_REG_BASE + 0x028) +#define CRG_PERSTAT2 (CRG_REG_BASE + 0x02C) +#define CRG_PEREN4 (CRG_REG_BASE + 0x040) +#define CRG_PERDIS4 (CRG_REG_BASE + 0x044) +#define CRG_PERCLKEN4 (CRG_REG_BASE + 0x048) +#define CRG_PERSTAT4 (CRG_REG_BASE + 0x04C) +#define CRG_PERRSTEN2 (CRG_REG_BASE + 0x078) +#define CRG_PERRSTDIS2 (CRG_REG_BASE + 0x07C) +#define CRG_PERRSTSTAT2 (CRG_REG_BASE + 0x080) +#define CRG_PERRSTEN3 (CRG_REG_BASE + 0x084) +#define CRG_PERRSTDIS3 (CRG_REG_BASE + 0x088) +#define CRG_PERRSTSTAT3 (CRG_REG_BASE + 0x08C) +#define CRG_PERRSTEN4 (CRG_REG_BASE + 0x090) +#define CRG_PERRSTDIS4 (CRG_REG_BASE + 0x094) +#define CRG_PERRSTSTAT4 (CRG_REG_BASE + 0x098) +#define CRG_ISOEN (CRG_REG_BASE + 0x144) +#define CRG_ISODIS (CRG_REG_BASE + 0x148) +#define CRG_ISOSTAT (CRG_REG_BASE + 0x14C) + +#define PERI_UFS_BIT (1 << 12) +#define PERI_ARST_UFS_BIT (1 << 7) + +#define PEREN2_HKADCSSI BIT24 + +#define PEREN4_GT_ACLK_USB3OTG (1 << 1) +#define PEREN4_GT_CLK_USB3OTG_REF (1 << 0) + +#define PERRSTEN2_HKADCSSI BIT24 + +#define PERRSTEN4_USB3OTG_MUX (1 << 8) +#define PERRSTEN4_USB3OTG_AHBIF (1 << 7) +#define PERRSTEN4_USB3OTG_32K (1 << 6) +#define PERRSTEN4_USB3OTG (1 << 5) +#define PERRSTEN4_USB3OTGPHY_POR (1 << 3) + +#define PERISOEN_USB_REFCLK_ISO_EN (1 << 25) + +#define CRG_CLKDIV16_OFFSET 0x0E8 +#define SC_DIV_UFSPHY_CFG_MASK (0x3 << 9) +#define SC_DIV_UFSPHY_CFG(x) (((x) & 0x3) << 9) + +#define CRG_CLKDIV17_OFFSET 0x0EC +#define SC_DIV_UFS_PERIBUS (1 << 14) + +#define UFS_SYS_REG_BASE 0xFF3B1000 + +#define UFS_SYS_PSW_POWER_CTRL_OFFSET 0x004 +#define UFS_SYS_PHY_ISO_EN_OFFSET 0x008 +#define UFS_SYS_HC_LP_CTRL_OFFSET 0x00C +#define UFS_SYS_PHY_CLK_CTRL_OFFSET 0x010 +#define UFS_SYS_PSW_CLK_CTRL_OFFSET 0x014 +#define UFS_SYS_CLOCK_GATE_BYPASS_OFFSET 0x018 +#define UFS_SYS_RESET_CTRL_EN_OFFSET 0x01C +#define UFS_SYS_MONITOR_HH_OFFSET 0x03C +#define UFS_SYS_UFS_SYSCTRL_OFFSET 0x05C +#define UFS_SYS_UFS_DEVICE_RESET_CTRL_OFFSET 0x060 +#define UFS_SYS_UFS_APB_ADDR_MASK_OFFSET 0x064 + +#define BIT_UFS_PSW_ISO_CTRL (1 << 16) +#define BIT_UFS_PSW_MTCMOS_EN (1 << 0) +#define BIT_UFS_REFCLK_ISO_EN (1 << 16) +#define BIT_UFS_PHY_ISO_CTRL (1 << 0) +#define BIT_SYSCTRL_LP_ISOL_EN (1 << 16) +#define BIT_SYSCTRL_PWR_READY (1 << 8) +#define BIT_SYSCTRL_REF_CLOCK_EN (1 << 24) +#define MASK_SYSCTRL_REF_CLOCK_SEL (3 << 8) +#define MASK_SYSCTRL_CFG_CLOCK_FREQ (0xFF) +#define BIT_SYSCTRL_PSW_CLK_EN (1 << 4) +#define MASK_UFS_CLK_GATE_BYPASS (0x3F) +#define BIT_SYSCTRL_LP_RESET_N (1 << 0) +#define BIT_UFS_REFCLK_SRC_SE1 (1 << 0) +#define MASK_UFS_SYSCTRL_BYPASS (0x3F << 16) +#define MASK_UFS_DEVICE_RESET (1 << 16) +#define BIT_UFS_DEVICE_RESET (1 << 0) + +#endif /* __HI3660_H__ */ diff --git a/Silicon/Hisilicon/Hi3660/Include/Hkadc.h b/Silicon/Hisilicon/Hi3660/Include/Hkadc.h new file mode 100644 index 0000000..2584256 --- /dev/null +++ b/Silicon/Hisilicon/Hi3660/Include/Hkadc.h @@ -0,0 +1,66 @@ +/** @file +* +* Copyright (c) 2018, Linaro Ltd. All rights reserved. +* +* This program and the accompanying materials +* are licensed and made available under the terms and conditions of the BSD License +* which accompanies this distribution. The full text of the license may be found at +* http://opensource.org/licenses/bsd-license.php +* +* THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, +* WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. +* +**/ + +#ifndef __HKADC_H__ +#define __HKADC_H__ + +#include <Hi3660.h> + +#define HKADC_DSP_START (HKADC_SSI_REG_BASE + 0x000) +#define HKADC_WR_NUM (HKADC_SSI_REG_BASE + 0x008) +#define HKADC_DSP_START_CLR (HKADC_SSI_REG_BASE + 0x01C) +#define HKADC_WR01_DATA (HKADC_SSI_REG_BASE + 0x020) + +#define WR1_WRITE_MODE BIT31 +#define WR1_READ_MODE (0 << 31) +#define WR1_ADDR(x) (((x) & 0x7F) << 24) +#define WR1_DATA(x) (((x) & 0xFF) << 16) +#define WR0_WRITE_MODE BIT15 +#define WR0_READ_MODE (0 << 15) +#define WR0_ADDR(x) (((x) & 0x7F) << 8) +#define WR0_DATA(x) ((x) & 0xFF) + +#define HKADC_WR23_DATA (HKADC_SSI_REG_BASE + 0x024) +#define HKADC_WR45_DATA (HKADC_SSI_REG_BASE + 0x028) +#define HKADC_DELAY01 (HKADC_SSI_REG_BASE + 0x030) +#define HKADC_DELAY23 (HKADC_SSI_REG_BASE + 0x034) +#define HKADC_DELAY45 (HKADC_SSI_REG_BASE + 0x038) +#define HKADC_DSP_RD2_DATA (HKADC_SSI_REG_BASE + 0x048) +#define HKADC_DSP_RD3_DATA (HKADC_SSI_REG_BASE + 0x04C) + +// HKADC Internal Registers +#define HKADC_CTRL_ADDR 0x00 +#define HKADC_START_ADDR 0x01 +#define HKADC_DATA1_ADDR 0x03 // high 8 bits +#define HKADC_DATA0_ADDR 0x04 // low 8 bits +#define HKADC_MODE_CFG 0x0A + +#define HKADC_VALUE_HIGH 0x0FF0 +#define HKADC_VALUE_LOW 0x000F +#define HKADC_VALID_VALUE 0x0FFF + +#define HKADC_CHANNEL_MAX 15 +#define HKADC_VREF_1V8 1800 +#define HKADC_ACCURACY 0x0FFF + +#define HKADC_WR01_VALUE ((HKADC_START_ADDR << 24) | (0x1 << 16)) +#define HKADC_WR23_VALUE ((0x1 << 31) | (HKADC_DATA0_ADDR << 24) | (1 << 15) | (HKADC_DATA1_ADDR << 8)) +#define HKADC_WR45_VALUE (0x80) +#define HKADC_CHANNEL0_DELAY01_VALUE ((0x0700 << 16) | 0xFFFF) +#define HKADC_DELAY01_VALUE ((0x0700 << 16) | 0x0200) +#define HKADC_DELAY23_VALUE ((0x00C8 << 16) | 0x00C8) +#define START_DELAY_TIMEOUT 2000 +#define HKADC_WR_NUM_VALUE 4 + +#endif /* __HKADC_H__ */