Hi all,

I met an issue on building edk2-platforms when I tried to port drivers. The log is in below.

Generating FVMAIN_COMPACT FV

####

Generating FVMAIN FV

####################################

#############Return Value = 2

GenSec: ERROR 0001: Error opening file

  /opt/workspace/boot/uefi/upstream/upstream-edk2/Build/HiKey960/DEBUG_GCC5/AARCH64/Platform/Hisilicon/HiKey960/HiKey960GpioDxe/HiKey960GpioDxe/OUTPUT/HiKey960GpioDxe.efi

GenSec: ERROR 2000: Status is not successful

GenFds.py...

  Status value is 0x2

: error 7000: Failed to generate section

### ['GenSec', '-s', 'EFI_SECTION_PE32', '-o', '/opt/workspace/boot/uefi/upstream/edk2/Build/HiKey960/DEBUG_GCC5/FV/Ffs/6aa12592-7e36-4aec-acf8-2ac2fd13815cHiKey960GpioDxe/6aa12592-7e36-4aec-acf8-2ac2fd13815cSEC2.1.pe32', '/opt/workspace/boot/uefi/upstream/upstream-edk2/Build/HiKey960/DEBUG_GCC5/AARCH64/Platform/Hisilicon/HiKey960/HiKey960GpioDxe/HiKey960GpioDxe/OUTPUT/HiKey960GpioDxe.efi']

build.py...

: error 7000: Failed to execute command

        GenFds -f /opt/workspace/boot/uefi/upstream/edk2-platforms/Platform/Hisilicon/HiKey960/HiKey960.fdf --conf=/opt/workspace/boot/uefi/upstream/edk2/Conf -o /opt/workspace/boot/uefi/upstream/edk2/Build/HiKey960/DEBUG_GCC5 -t GCC5 -b DEBUG -p /opt/workspace/boot/uefi/upstream/edk2-platforms/Platform/Hisilicon/HiKey960/HiKey960.dsc -a AARCH64 -D "EFI_SOURCE=/opt/workspace/boot/uefi/upstream/edk2/EdkCompatibilityPkg" -D "EDK_SOURCE=/opt/workspace/boot/uefi/upstream/edk2/EdkCompatibilityPkg" -D "TOOL_CHAIN_TAG=GCC5" -D "TOOLCHAIN=GCC5" -D "TARGET=DEBUG" -D "FAMILY=GCC" -D "WORKSPACE=/opt/workspace/boot/uefi/upstream/edk2" -D "FIRMWARE_VER=44699e6-dirty" -D "EDK_TOOLS_PATH=/opt/workspace/boot/uefi/upstream/edk2/BaseTools" -D "ARCH=AARCH64" -D "ECP_SOURCE=/opt/workspace/boot/uefi/upstream/edk2/EdkCompatibilityPkg" [/opt/workspace/boot/uefi/upstream/upstream-edk2]

- Failed -

Build end time: 13:28:45, Feb.19 2018

Build total time: 00:00:57

------------------------------------------------------------

                               Hikey960 (AARCH64) DEBUG fail

------------------------------------------------------------

pass    0

fail    1

Fail to build UEFI & ARM Trusted Firmware (0)

And I found that HiKey960GpioDxe driver is generated at Build/HiKey960/DEBUG_GCC5/AARCH64/edk2-platforms/HiKey960. The edk2 tries to find it by the path without “edk2-platforms”. How to fix this issue?

Best Regards

Haojian