Hi Leif and Roy,
Thank you very much for your help!
1.I have changed the setting,but it cannot work either,the log’s as follows:
-----------------------------------------------------------------------------------------
The default boot selection will start in 10 seconds
[1] Ramdisk
- VenMsg(06ED4DD0-FF78-11D3-BDC4-00A0C94053D1,0000000000000000)/uImage
- Initrd: VenMsg(06ED4DD0-FF78-11D3-BDC4-00A0C94053D1,0000000000000000)/
initrd
- Arguments: mem=256M console=ttyAMA0,9600
- LoaderType: Linux kernel with ATAG data
-----------------------
Global FDT Config
- not configured
-----------------------
[a] Boot Manager
[b] EBL
[c] GO
Start: a
[1] Add Boot Device Entry
[2] Update Boot Device Entry
[3] Remove Boot Device Entry
[4] Update FDT path
[5] Return to main menu
Choice: 1
[1] (29 MB)
- VenMsg(06ED4DD0-FF78-11D3-BDC4-00A0C94053D1,0000000000000000)
[2] (978 MB)
- Pci(0x0,0x0)/Sata(0x0,0x0,0x0)/HD(1,MBR,0x00000000,0x3F,0x1EA3FE)
[3] (978 MB)
- Pci(0x0,0x0)/Sata(0x0,0x0,0x0)/HD(2,MBR,0x00000000,0x1EA43D,0x1EA43D)
[4] (978 MB)
- Pci(0x0,0x0)/Sata(0x0,0x0,0x0)/HD(3,MBR,0x00000000,0x3D487A,0x1EA43D)
[5] VenMsg(06ED4DD0-FF78-11D3-BDC4-00A0C94053D1,0000000000000000)
- VenMsg(06ED4DD0-FF78-11D3-BDC4-00A0C94053D1,0000000000000000)
[6] PXE on MAC Address: 0E:00:FF:0C:FF:FE
- MAC(0E00FF0CFFFE,0x1)
[7] TFTP on MAC Address: 0E:00:FF:0C:FF:FE
- MAC(0E00FF0CFFFE,0x1)
Select the Boot Device: 7
Get the IP address from DHCP: [y/n] y
Get the TFTP server IP address: 192.168.10.100
File path of the EFI Application or the kernel : zImage
Is an EFI Application? [y/n] y
Is your application is an OS loader? [y/n] y
Description for this new Entry: OS
[1] Add Boot Device Entry
[2] Update Boot Device Entry
[3] Remove Boot Device Entry
[4] Update FDT path
[5] Return to main menu
Choice: 5
[1] Ramdisk
- VenMsg(06ED4DD0-FF78-11D3-BDC4-00A0C94053D1,0000000000000000)/uImage
- Initrd: VenMsg(06ED4DD0-FF78-11D3-BDC4-00A0C94053D1,0000000000000000)/
initrd
- Arguments: mem=256M console=ttyAMA0,9600
- LoaderType: Linux kernel with ATAG data
[2] OS
- MAC(0E00FF0CFFFE,0x1)/IPv4(192.168.10.100)
- LoaderType: EFI Application
-----------------------
Global FDT Config
- not configured
-----------------------
[a] Boot Manager
[b] EBL
[c] GO
Start: 2
AllocatePoolPages: failed to allocate 322561 pages
AllocatePool: failed to allocate 1321205792 bytes
AllocatePoolPages: failed to allocate 322561 pages
AllocatePool: failed to allocate 1321205792 bytes
AllocatePoolPages: failed to allocate 322561 pages
-----------------------------------------------------------------------------------------
2.There’s no ‘ping’ command in our shell,but we can use the command of ‘ifconfig’ to configure
IP of board:
-----------------------------------------------------------------------------------------
D01 >cd fs0:
D01 fs0:\>dir
D01 fs0:\>ifconfig -s eth0 192.168.10.50 255.255.255.0 192.168.10.1
Please wait......................................
Your console may stop responding for a while ....
The default address is: 192.168.10.50
D01 fs0:\>provision 192.168.10.100 -u admin -p admin -f D01.fd
Please select the destination disk partition:
1.Label founded succ is 0x6C282010
2.Label founded succ is 0x6C282010
3.Label founded succ is 0x6C282010
4.Label founded succ is 0x6C282010
Please input the index(or input 'q' to quit):1
Connected to the ftp server.
Download file D01.fd from server.
###
CurFileSize = 100000
Download file D01.fd succ!
D01 fs0:\>dir
<DIR> boot
D01 fs0:\>cd boot
D01 fs0:\boot>dir
<DIR> .
<DIR> ..
1,048,576 D01.fd
D01 fs0:\boot>
-----------------------------------------------------------------------------------------
I am sure that the network is OK,because the board can download files from PC which it connect
to.
At the same time,the board can boot kernel by PXE:
-----------------------------------------------------------------------------------------
[1] Ramdisk
- VenMsg(06ED4DD0-FF78-11D3-BDC4-00A0C94053D1,0000000000000000)/uImage
- Initrd: VenMsg(06ED4DD0-FF78-11D3-BDC4-00A0C94053D1,0000000000000000)/
initrd
- Arguments: mem=256M console=ttyAMA0,9600
- LoaderType: Linux kernel with ATAG data
-----------------------
Global FDT Config
- not configured
-----------------------
[a] Boot Manager
[b] EBL
[c] GO
Start: a
[1] Add Boot Device Entry
[2] Update Boot Device Entry
[3] Remove Boot Device Entry
[4] Update FDT path
[5] Return to main menu
Choice: 1
[1] (29 MB)
- VenMsg(06ED4DD0-FF78-11D3-BDC4-00A0C94053D1,0000000000000000)
[2] (978 MB)
- Pci(0x0,0x0)/Sata(0x0,0x0,0x0)/HD(1,MBR,0x00000000,0x3F,0x1EA3FE)
[3] (978 MB)
- Pci(0x0,0x0)/Sata(0x0,0x0,0x0)/HD(2,MBR,0x00000000,0x1EA43D,0x1EA43D)
[4] (978 MB)
- Pci(0x0,0x0)/Sata(0x0,0x0,0x0)/HD(3,MBR,0x00000000,0x3D487A,0x1EA43D)
[5] VenMsg(06ED4DD0-FF78-11D3-BDC4-00A0C94053D1,0000000000000000)
- VenMsg(06ED4DD0-FF78-11D3-BDC4-00A0C94053D1,0000000000000000)
[6] PXE on MAC Address: 0E:00:FF:0C:FF:FE
- MAC(0E00FF0CFFFE,0x1)
[7] TFTP on MAC Address: 0E:00:FF:0C:FF:FE
- MAC(0E00FF0CFFFE,0x1)
Select the Boot Device: 6
Description for this new Entry: PXe
[1] Add Boot Device Entry
[2] Update Boot Device Entry
[3] Remove Boot Device Entry
[4] Update FDT path
[5] Return to main menu
Choice: 5
[1] Ramdisk
- VenMsg(06ED4DD0-FF78-11D3-BDC4-00A0C94053D1,0000000000000000)/uImage
- Initrd: VenMsg(06ED4DD0-FF78-11D3-BDC4-00A0C94053D1,0000000000000000)/
initrd
- Arguments: mem=256M console=ttyAMA0,9600
- LoaderType: Linux kernel with ATAG data
[2] PXe
- MAC(0E00FF0CFFFE,0x1)
- LoaderType: EFI Application
-----------------------
Global FDT Config
- not configured
-----------------------
[a] Boot Manager
[b] EBL
[c] GO
Start: 2
[DJ]: BdsFileSystemSupport : 397
[DJ]: BdsFirmwareVolumeSupport : 535
[DJ]: BdsMemoryMapSupport : 480
..Loading driver at 0x0006ACDA000 EntryPoint=0x0006ACDA400
Welcome to GRUB!
-----------------------------------------------------------------------------------------
3.Are there boards which can boot kernel by Tftp?
I’m sorry for taking your time,thank you!
Best regards,
Guotao Xie
发件人: Roy Franz [mailto:roy.franz@linaro.org]
发送时间: 2014年4月24日 6:31
收件人: Leif Lindholm
抄送: Xieguotao; linaro-uefi@lists.linaro.org
主题: Re: [Linaro-uefi] The problem in Booting Kernel
Hi Xieguotao,
Does the 'ping' command from the EFI shell work in your configuration?
Roy
On Wed, Apr 23, 2014 at 2:19 PM, Leif Lindholm <leif.lindholm@linaro.org> wrote:
Hi Xieguotao,
I am sorry, I have only one possible idea:
For the configuration option
---
Is your application is an OS loader? [y/n] n
---
I believe that the setting should be 'y' - the stub is indeed an OS loader.
I have asked some who have experimented with UEFI network boot to
chime in with their experiences.
Best Regards,
Leif
On 23 April 2014 09:49, Xieguotao <xieguotao@huawei.com> wrote:
> Hi all,
>
>
>
> I have a problem,can you please help me out?
>
> We want boot zImage(zImage is comprised of EFI stub and Linux kernel) by
> Tftp in Bootmanager,but we found an error:
>
>
>
> D01 >exit
>
> unload symbols_only
> c:\uefi_linaro_workspace\binary_give\uefi-next-d95896d\Build
>
> \D01\DEBUG_RVCT\ARM\HisiPkg\D01BoardPkg\Application\Ebl\Ebl\DEBUG\Ebl.dll
>
> [1] Ramdisk
>
> -
> VenMsg(06ED4DD0-FF78-11D3-BDC4-00A0C94053D1,0000000000000000)/uImage
>
> - Initrd:
> VenMsg(06ED4DD0-FF78-11D3-BDC4-00A0C94053D1,0000000000000000)/
>
> initrd
>
> - Arguments: mem=256M console=ttyAMA0,9600
>
> - LoaderType: Linux kernel with ATAG data
>
> -----------------------
>
> Global FDT Config
>
> - not configured
>
> -----------------------
>
> [a] Boot Manager
>
> [b] EBL
>
> [c] GO
>
> Start: a
>
> [1] Add Boot Device Entry
>
> [2] Update Boot Device Entry
>
> [3] Remove Boot Device Entry
>
> [4] Update FDT path
>
> [5] Return to main menu
>
> Choice: 1
>
> [1] (29 MB)
>
> - VenMsg(06ED4DD0-FF78-11D3-BDC4-00A0C94053D1,0000000000000000)
>
> [2] (978 MB)
>
> - Pci(0x0,0x0)/Sata(0x0,0x0,0x0)/HD(1,MBR,0x00000000,0x3F,0x1EA3FE)
>
> [3] (978 MB)
>
> -
> Pci(0x0,0x0)/Sata(0x0,0x0,0x0)/HD(2,MBR,0x00000000,0x1EA43D,0x1EA43D)
>
> [4] (978 MB)
>
> -
> Pci(0x0,0x0)/Sata(0x0,0x0,0x0)/HD(3,MBR,0x00000000,0x3D487A,0x1EA43D)
>
> [5] VenMsg(06ED4DD0-FF78-11D3-BDC4-00A0C94053D1,0000000000000000)
>
> - VenMsg(06ED4DD0-FF78-11D3-BDC4-00A0C94053D1,0000000000000000)
>
> [6] PXE on MAC Address: 0E:00:FF:0C:FF:FE
>
> - MAC(0E00FF0CFFFE,0x1)
>
> [7] TFTP on MAC Address: 0E:00:FF:0C:FF:FE
>
> - MAC(0E00FF0CFFFE,0x1)
>
> Select the Boot Device: 7
>
> Get the IP address from DHCP: [y/n] y
>
> Get the TFTP server IP address: 192.168.10.100
>
> File path of the EFI Application or the kernel : zImage
>
> Is an EFI Application? [y/n] y
>
> Is your application is an OS loader? [y/n] n
>
> Description for this new Entry: OS
>
> [1] Add Boot Device Entry
>
> [2] Update Boot Device Entry
>
> [3] Remove Boot Device Entry
>
> [4] Update FDT path
>
> [5] Return to main menu
>
> Choice: 5
>
> [1] Ramdisk
>
> -
> VenMsg(06ED4DD0-FF78-11D3-BDC4-00A0C94053D1,0000000000000000)/uImage
>
> - Initrd:
> VenMsg(06ED4DD0-FF78-11D3-BDC4-00A0C94053D1,0000000000000000)/
>
> initrd
>
> - Arguments: mem=256M console=ttyAMA0,9600
>
> - LoaderType: Linux kernel with ATAG data
>
> [2] OS
>
> - MAC(0E00FF0CFFFE,0x1)/IPv4(192.168.10.100)
>
> - LoaderType: EFI Application
>
> -----------------------
>
> Global FDT Config
>
> - not configured
>
> -----------------------
>
> [a] Boot Manager
>
> [b] EBL
>
> [c] GO
>
> Start: 2
>
> AllocatePoolPages: failed to allocate 322561 pages
>
> AllocatePool: failed to allocate 1321205792 bytes
>
> AllocatePoolPages: failed to allocate 322561 pages
>
> AllocatePool: failed to allocate 1321205792 bytes
>
>
>
>
>
> The error happened in BdsLoadImage-> BdsConnectDevicePath.Actually, Handle
> is no use in BdsTftpLoadImage,so I modify BdsLoadImage for test,then we can
> download zImage,but we still cannot boot it;
>
> (We can boot linux by Grub)
>
>
>
> Can you give me some advice?
>
>
>
>
> _______________________________________________
> Linaro-uefi mailing list
> Linaro-uefi@lists.linaro.org
>
http://lists.linaro.org/mailman/listinfo/linaro-uefi
>
_______________________________________________
Linaro-uefi mailing list
Linaro-uefi@lists.linaro.org
http://lists.linaro.org/mailman/listinfo/linaro-uefi