Linaro enterprise group is coordinating work for adding SBSA compliant virtual platform for QEMU. This patch adds initial support for platform with nondiscoverable AHCI, VGA and single DRAM window over 32bit address space.

Using FDF to compose EFI flash images with ATF images. Flash0 (secure) is used by BL1 and FIP (BL2 + BL31). Flash1 contains EFI code and EFI variables.

For compilation ATF bl1.bin and fip.bin images are needed in workspace. Follow ATF/docs/plat/sbsa.rst to build those and place them on workspace directory. Build instructions in Platform/Qemu/SbsaQemu/Readme.md

Contributed-under: TianoCore Contribution Agreement 1.1 Signed-off-by: Radoslaw Biernacki radoslaw.biernacki@linaro.org --- Silicon/Qemu/SbsaQemuPkg.dec | 45 ++ Platform/Qemu/SbsaQemu/SbsaQemu.dsc | 744 ++++++++++++++++++++ Platform/Qemu/SbsaQemu/SbsaQemu.fdf | 328 +++++++++ Silicon/Qemu/Drivers/SbsaQemuPlatformDxe/SbsaQemuPlatformDxe.inf | 48 ++ Silicon/Qemu/Library/SbsaQemuLib/SbsaQemuLib.inf | 53 ++ Silicon/Qemu/Library/SbsaQemuNorFlashLib/SbsaQemuNorFlashLib.inf | 35 + Silicon/Qemu/Library/SbsaQemuPciHostBridgeLib/SbsaQemuPciHostBridgeLib.inf | 55 ++ Silicon/Qemu/Drivers/SbsaQemuPlatformDxe/SbsaQemuPlatformDxe.c | 61 ++ Silicon/Qemu/Library/SbsaQemuLib/SbsaQemuLib.c | 148 ++++ Silicon/Qemu/Library/SbsaQemuLib/SbsaQemuMem.c | 109 +++ Silicon/Qemu/Library/SbsaQemuNorFlashLib/SbsaQemuNorFlashLib.c | 46 ++ Silicon/Qemu/Library/SbsaQemuPciHostBridgeLib/SbsaQemuPciHostBridgeLib.c | 224 ++++++ Maintainers.txt | 12 + Platform/Qemu/SbsaQemu/Readme.md | 162 +++++ Readme.md | 3 + Silicon/Qemu/Library/SbsaQemuLib/SbsaQemuHelper.S | 62 ++ 16 files changed, 2135 insertions(+) create mode 100644 Silicon/Qemu/SbsaQemuPkg.dec create mode 100644 Platform/Qemu/SbsaQemu/SbsaQemu.dsc create mode 100644 Platform/Qemu/SbsaQemu/SbsaQemu.fdf create mode 100644 Silicon/Qemu/Drivers/SbsaQemuPlatformDxe/SbsaQemuPlatformDxe.inf create mode 100644 Silicon/Qemu/Library/SbsaQemuLib/SbsaQemuLib.inf create mode 100644 Silicon/Qemu/Library/SbsaQemuNorFlashLib/SbsaQemuNorFlashLib.inf create mode 100644 Silicon/Qemu/Library/SbsaQemuPciHostBridgeLib/SbsaQemuPciHostBridgeLib.inf create mode 100644 Silicon/Qemu/Drivers/SbsaQemuPlatformDxe/SbsaQemuPlatformDxe.c create mode 100644 Silicon/Qemu/Library/SbsaQemuLib/SbsaQemuLib.c create mode 100644 Silicon/Qemu/Library/SbsaQemuLib/SbsaQemuMem.c create mode 100644 Silicon/Qemu/Library/SbsaQemuNorFlashLib/SbsaQemuNorFlashLib.c create mode 100644 Silicon/Qemu/Library/SbsaQemuPciHostBridgeLib/SbsaQemuPciHostBridgeLib.c create mode 100644 Platform/Qemu/SbsaQemu/Readme.md create mode 100644 Silicon/Qemu/Library/SbsaQemuLib/SbsaQemuHelper.S

diff --git a/Silicon/Qemu/SbsaQemuPkg.dec b/Silicon/Qemu/SbsaQemuPkg.dec new file mode 100644 index 0000000000..1401776833 --- /dev/null +++ b/Silicon/Qemu/SbsaQemuPkg.dec @@ -0,0 +1,45 @@ +#/** @file +# +# Copyright (c) 2019, Linaro Limited. All rights reserved. +# +# This program and the accompanying materials +# are licensed and made available under the terms and conditions of the BSD License +# which accompanies this distribution. The full text of the license may be found at +# http://opensource.org/licenses/bsd-license.php +# +# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, +# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. +# +#**/ + +[Defines] + DEC_SPECIFICATION = 0x0001001B + PACKAGE_NAME = SbsaQemuPkg + PACKAGE_GUID = 8db32c5a-2821-43e2-b4ac-bc148e2b0b05 + PACKAGE_VERSION = 0.1 + +################################################################################ +# +# Include Section - list of Include Paths that are provided by this package. +# Comments are used for Keywords and Module Types. +# +# Supported Module Types: +# BASE SEC PEI_CORE PEIM DXE_CORE DXE_DRIVER DXE_RUNTIME_DRIVER DXE_SMM_DRIVER DXE_SAL_DRIVER UEFI_DRIVER UEFI_APPLICATION +# +################################################################################ +#[Includes.common] +# Include # Root include for the package + +[LibraryClasses] + ArmPlatformLib|Include/Library/ArmPlatformLib.h + +[Guids.common] + gArmVirtSbsaQemuPlatformTokenSpaceGuid = { 0xaab3bea9, 0xa8e8, 0x4e76, { 0xb5, 0x3a, 0x35, 0x22, 0x11, 0xce, 0xf7, 0xf7 } } + +[PcdsFixedAtBuild.common] + + # Non discoverable devices Pcds + gArmVirtSbsaQemuPlatformTokenSpaceGuid.PcdPlatformAhciBase|0|UINT64|0x00000001 + gArmVirtSbsaQemuPlatformTokenSpaceGuid.PcdPlatformAhciSize|0x10000|UINT32|0x00000002 + gArmVirtSbsaQemuPlatformTokenSpaceGuid.PcdPlatformEhciBase|0|UINT64|0x00000003 + gArmVirtSbsaQemuPlatformTokenSpaceGuid.PcdPlatformEhciSize|0x10000|UINT32|0x00000004 diff --git a/Platform/Qemu/SbsaQemu/SbsaQemu.dsc b/Platform/Qemu/SbsaQemu/SbsaQemu.dsc new file mode 100644 index 0000000000..fb75ac1dcb --- /dev/null +++ b/Platform/Qemu/SbsaQemu/SbsaQemu.dsc @@ -0,0 +1,744 @@ +# +# Copyright (c) 2019, Linaro Limited. All rights reserved. +# +# This program and the accompanying materials +# are licensed and made available under the terms and conditions of the BSD License +# which accompanies this distribution. The full text of the license may be found at +# http://opensource.org/licenses/bsd-license.php +# +# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, +# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. +# +# + +################################################################################ +# +# Defines Section - statements that will be processed to create a Makefile. +# +################################################################################ +[Defines] + PLATFORM_NAME = SbsaQemu + PLATFORM_GUID = feb0325c-b93d-4e47-8844-b832adeb9e0c + PLATFORM_VERSION = 0.1 + DSC_SPECIFICATION = 0x00010005 + OUTPUT_DIRECTORY = Build/SbsaQemu + SUPPORTED_ARCHITECTURES = AARCH64 + BUILD_TARGETS = DEBUG|RELEASE|NOOPT + SKUID_IDENTIFIER = DEFAULT + FLASH_DEFINITION = Platform/Qemu/SbsaQemu/SbsaQemu.fdf + + # + # Defines for default states. These can be changed on the command line. + # -D FLAG=VALUE + # + + DEFINE DEBUG_PRINT_ERROR_LEVEL = 0x8000004F + +# +# Network definition +# +DEFINE NETWORK_SNP_ENABLE = FALSE +DEFINE NETWORK_IP6_ENABLE = FALSE +DEFINE NETWORK_TLS_ENABLE = FALSE +DEFINE NETWORK_HTTP_BOOT_ENABLE = FALSE + +################################################################################ +# +# Library Class section - list of all Library Classes needed by this Platform. +# +################################################################################ +[LibraryClasses.common] +!if $(TARGET) == RELEASE + DebugLib|MdePkg/Library/BaseDebugLibNull/BaseDebugLibNull.inf +!else + DebugLib|MdePkg/Library/BaseDebugLibSerialPort/BaseDebugLibSerialPort.inf +!endif + DebugPrintErrorLevelLib|MdePkg/Library/BaseDebugPrintErrorLevelLib/BaseDebugPrintErrorLevelLib.inf + + BaseLib|MdePkg/Library/BaseLib/BaseLib.inf + SafeIntLib|MdePkg/Library/BaseSafeIntLib/BaseSafeIntLib.inf + BmpSupportLib|MdeModulePkg/Library/BaseBmpSupportLib/BaseBmpSupportLib.inf + SynchronizationLib|MdePkg/Library/BaseSynchronizationLib/BaseSynchronizationLib.inf + PerformanceLib|MdePkg/Library/BasePerformanceLibNull/BasePerformanceLibNull.inf + PrintLib|MdePkg/Library/BasePrintLib/BasePrintLib.inf + PeCoffGetEntryPointLib|MdePkg/Library/BasePeCoffGetEntryPointLib/BasePeCoffGetEntryPointLib.inf + PeCoffLib|MdePkg/Library/BasePeCoffLib/BasePeCoffLib.inf + IoLib|MdePkg/Library/BaseIoLibIntrinsic/BaseIoLibIntrinsicArmVirt.inf + UefiDecompressLib|MdePkg/Library/BaseUefiDecompressLib/BaseUefiDecompressLib.inf + CpuLib|MdePkg/Library/BaseCpuLib/BaseCpuLib.inf + + UefiLib|MdePkg/Library/UefiLib/UefiLib.inf + HobLib|ArmVirtPkg/Library/ArmVirtDxeHobLib/ArmVirtDxeHobLib.inf + UefiRuntimeServicesTableLib|MdePkg/Library/UefiRuntimeServicesTableLib/UefiRuntimeServicesTableLib.inf + DevicePathLib|MdePkg/Library/UefiDevicePathLibDevicePathProtocol/UefiDevicePathLibDevicePathProtocol.inf + UefiBootServicesTableLib|MdePkg/Library/UefiBootServicesTableLib/UefiBootServicesTableLib.inf + DxeServicesTableLib|MdePkg/Library/DxeServicesTableLib/DxeServicesTableLib.inf + DxeServicesLib|MdePkg/Library/DxeServicesLib/DxeServicesLib.inf + UefiDriverEntryPoint|MdePkg/Library/UefiDriverEntryPoint/UefiDriverEntryPoint.inf + UefiApplicationEntryPoint|MdePkg/Library/UefiApplicationEntryPoint/UefiApplicationEntryPoint.inf + HiiLib|MdeModulePkg/Library/UefiHiiLib/UefiHiiLib.inf + UefiHiiServicesLib|MdeModulePkg/Library/UefiHiiServicesLib/UefiHiiServicesLib.inf + SortLib|MdeModulePkg/Library/UefiSortLib/UefiSortLib.inf + ShellLib|ShellPkg/Library/UefiShellLib/UefiShellLib.inf + FileHandleLib|MdePkg/Library/UefiFileHandleLib/UefiFileHandleLib.inf + + UefiRuntimeLib|MdePkg/Library/UefiRuntimeLib/UefiRuntimeLib.inf + OrderedCollectionLib|MdePkg/Library/BaseOrderedCollectionRedBlackTreeLib/BaseOrderedCollectionRedBlackTreeLib.inf + + # + # Ramdisk Requirements + # + FileExplorerLib|MdeModulePkg/Library/FileExplorerLib/FileExplorerLib.inf + + # Allow dynamic PCDs + # + PcdLib|MdePkg/Library/DxePcdLib/DxePcdLib.inf + + # use the accelerated BaseMemoryLibOptDxe by default, overrides for SEC/PEI below + BaseMemoryLib|MdePkg/Library/BaseMemoryLibOptDxe/BaseMemoryLibOptDxe.inf + + # + # It is not possible to prevent the ARM compiler from inserting calls to intrinsic functions. + # This library provides the instrinsic functions such a compiler may generate calls to. + # + NULL|ArmPkg/Library/CompilerIntrinsicsLib/CompilerIntrinsicsLib.inf + + # Add support for GCC stack protector + NULL|MdePkg/Library/BaseStackCheckLib/BaseStackCheckLib.inf + + # ARM Architectural Libraries + CacheMaintenanceLib|ArmPkg/Library/ArmCacheMaintenanceLib/ArmCacheMaintenanceLib.inf + DefaultExceptionHandlerLib|ArmPkg/Library/DefaultExceptionHandlerLib/DefaultExceptionHandlerLib.inf + CpuExceptionHandlerLib|ArmPkg/Library/ArmExceptionLib/ArmExceptionLib.inf + ArmDisassemblerLib|ArmPkg/Library/ArmDisassemblerLib/ArmDisassemblerLib.inf + ArmGicLib|ArmPkg/Drivers/ArmGic/ArmGicLib.inf + ArmGicArchLib|ArmPkg/Library/ArmGicArchLib/ArmGicArchLib.inf + ArmSmcLib|ArmPkg/Library/ArmSmcLib/ArmSmcLib.inf + ArmHvcLib|ArmPkg/Library/ArmHvcLib/ArmHvcLib.inf + ArmGenericTimerCounterLib|ArmPkg/Library/ArmGenericTimerVirtCounterLib/ArmGenericTimerVirtCounterLib.inf + + PlatformPeiLib|ArmPlatformPkg/PlatformPei/PlatformPeiLib.inf + MemoryInitPeiLib|ArmPlatformPkg/MemoryInitPei/MemoryInitPeiLib.inf + ResetSystemLib|ArmPkg/Library/ArmSmcPsciResetSystemLib/ArmSmcPsciResetSystemLib.inf + + # ARM PL031 RTC Driver + RealTimeClockLib|ArmPlatformPkg/Library/PL031RealTimeClockLib/PL031RealTimeClockLib.inf + TimeBaseLib|EmbeddedPkg/Library/TimeBaseLib/TimeBaseLib.inf + # ARM PL011 UART Driver + PL011UartLib|ArmPlatformPkg/Library/PL011UartLib/PL011UartLib.inf + + # + # Uncomment (and comment out the next line) For RealView Debugger. The Standard IO window + # in the debugger will show load and unload commands for symbols. You can cut and paste this + # into the command window to load symbols. We should be able to use a script to do this, but + # the version of RVD I have does not support scripts accessing system memory. + # + #PeCoffExtraActionLib|ArmPkg/Library/RvdPeCoffExtraActionLib/RvdPeCoffExtraActionLib.inf + PeCoffExtraActionLib|ArmPkg/Library/DebugPeCoffExtraActionLib/DebugPeCoffExtraActionLib.inf + #PeCoffExtraActionLib|MdePkg/Library/BasePeCoffExtraActionLibNull/BasePeCoffExtraActionLibNull.inf + + DebugAgentLib|MdeModulePkg/Library/DebugAgentLibNull/DebugAgentLibNull.inf + DebugAgentTimerLib|EmbeddedPkg/Library/DebugAgentTimerLibNull/DebugAgentTimerLibNull.inf + + # PCI Libraries + PciLib|MdePkg/Library/BasePciLibPciExpress/BasePciLibPciExpress.inf + PciExpressLib|MdePkg/Library/BasePciExpressLib/BasePciExpressLib.inf + PciCapLib|OvmfPkg/Library/BasePciCapLib/BasePciCapLib.inf + PciCapPciSegmentLib|OvmfPkg/Library/BasePciCapPciSegmentLib/BasePciCapPciSegmentLib.inf + PciCapPciIoLib|OvmfPkg/Library/UefiPciCapPciIoLib/UefiPciCapPciIoLib.inf + + # USB Libraries + UefiUsbLib|MdePkg/Library/UefiUsbLib/UefiUsbLib.inf + + # + # CryptoPkg libraries needed by multiple firmware features + # + IntrinsicLib|CryptoPkg/Library/IntrinsicLib/IntrinsicLib.inf + OpensslLib|CryptoPkg/Library/OpensslLib/OpensslLib.inf + BaseCryptLib|CryptoPkg/Library/BaseCryptLib/BaseCryptLib.inf + + # + # Secure Boot dependencies + # + TpmMeasurementLib|SecurityPkg/Library/DxeTpmMeasurementLib/DxeTpmMeasurementLib.inf + AuthVariableLib|SecurityPkg/Library/AuthVariableLib/AuthVariableLib.inf + + # re-use the UserPhysicalPresent() dummy implementation from the ovmf tree + PlatformSecureLib|OvmfPkg/Library/PlatformSecureLib/PlatformSecureLib.inf + + VarCheckLib|MdeModulePkg/Library/VarCheckLib/VarCheckLib.inf + UefiBootManagerLib|MdeModulePkg/Library/UefiBootManagerLib/UefiBootManagerLib.inf + + ReportStatusCodeLib|MdePkg/Library/BaseReportStatusCodeLibNull/BaseReportStatusCodeLibNull.inf + + ArmLib|ArmPkg/Library/ArmLib/ArmBaseLib.inf + ArmMmuLib|ArmPkg/Library/ArmMmuLib/ArmMmuBaseLib.inf + + ArmPlatformLib|ArmPlatformPkg/Library/ArmPlatformLibNull/ArmPlatformLibNull.inf + + TimerLib|ArmPkg/Library/ArmArchTimerLib/ArmArchTimerLib.inf + NorFlashPlatformLib|Silicon/Qemu/Library/SbsaQemuNorFlashLib/SbsaQemuNorFlashLib.inf + + CapsuleLib|MdeModulePkg/Library/DxeCapsuleLibNull/DxeCapsuleLibNull.inf + BootLogoLib|MdeModulePkg/Library/BootLogoLib/BootLogoLib.inf + PlatformBootManagerLib|ArmPkg/Library/PlatformBootManagerLib/PlatformBootManagerLib.inf + CustomizedDisplayLib|MdeModulePkg/Library/CustomizedDisplayLib/CustomizedDisplayLib.inf + FileExplorerLib|MdeModulePkg/Library/FileExplorerLib/FileExplorerLib.inf + PciSegmentLib|MdePkg/Library/BasePciSegmentLibPci/BasePciSegmentLibPci.inf + PciHostBridgeLib|Silicon/Qemu/Library/SbsaQemuPciHostBridgeLib/SbsaQemuPciHostBridgeLib.inf + + FrameBufferBltLib|MdeModulePkg/Library/FrameBufferBltLib/FrameBufferBltLib.inf + + # Serial driver + SerialPortLib|ArmPlatformPkg/Library/PL011SerialPortLib/PL011SerialPortLib.inf + PL011UartClockLib|ArmPlatformPkg/Library/PL011UartClockLib/PL011UartClockLib.inf + +[LibraryClasses.common.SEC] + PcdLib|MdePkg/Library/BasePcdLibNull/BasePcdLibNull.inf + BaseMemoryLib|MdePkg/Library/BaseMemoryLib/BaseMemoryLib.inf + + DebugAgentLib|ArmPkg/Library/DebugAgentSymbolsBaseLib/DebugAgentSymbolsBaseLib.inf + HobLib|MdePkg/Library/PeiHobLib/PeiHobLib.inf + PeiServicesLib|MdePkg/Library/PeiServicesLib/PeiServicesLib.inf + PeiServicesTablePointerLib|ArmPkg/Library/PeiServicesTablePointerLib/PeiServicesTablePointerLib.inf + MemoryAllocationLib|MdePkg/Library/PeiMemoryAllocationLib/PeiMemoryAllocationLib.inf + +[LibraryClasses.common.PEI_CORE] + PcdLib|MdePkg/Library/PeiPcdLib/PeiPcdLib.inf + BaseMemoryLib|MdePkg/Library/BaseMemoryLib/BaseMemoryLib.inf + HobLib|MdePkg/Library/PeiHobLib/PeiHobLib.inf + PeiServicesLib|MdePkg/Library/PeiServicesLib/PeiServicesLib.inf + MemoryAllocationLib|MdePkg/Library/PeiMemoryAllocationLib/PeiMemoryAllocationLib.inf + PeiCoreEntryPoint|MdePkg/Library/PeiCoreEntryPoint/PeiCoreEntryPoint.inf + PerformanceLib|MdeModulePkg/Library/PeiPerformanceLib/PeiPerformanceLib.inf + OemHookStatusCodeLib|MdeModulePkg/Library/OemHookStatusCodeLibNull/OemHookStatusCodeLibNull.inf + PeCoffGetEntryPointLib|MdePkg/Library/BasePeCoffGetEntryPointLib/BasePeCoffGetEntryPointLib.inf + ExtractGuidedSectionLib|MdePkg/Library/PeiExtractGuidedSectionLib/PeiExtractGuidedSectionLib.inf + + PeiServicesTablePointerLib|ArmPkg/Library/PeiServicesTablePointerLib/PeiServicesTablePointerLib.inf + +[LibraryClasses.common.PEIM] + PcdLib|MdePkg/Library/PeiPcdLib/PeiPcdLib.inf + BaseMemoryLib|MdePkg/Library/BaseMemoryLib/BaseMemoryLib.inf + HobLib|MdePkg/Library/PeiHobLib/PeiHobLib.inf + PeiServicesLib|MdePkg/Library/PeiServicesLib/PeiServicesLib.inf + MemoryAllocationLib|MdePkg/Library/PeiMemoryAllocationLib/PeiMemoryAllocationLib.inf + PeimEntryPoint|MdePkg/Library/PeimEntryPoint/PeimEntryPoint.inf + PerformanceLib|MdeModulePkg/Library/PeiPerformanceLib/PeiPerformanceLib.inf + OemHookStatusCodeLib|MdeModulePkg/Library/OemHookStatusCodeLibNull/OemHookStatusCodeLibNull.inf + PeCoffGetEntryPointLib|MdePkg/Library/BasePeCoffGetEntryPointLib/BasePeCoffGetEntryPointLib.inf + PeiResourcePublicationLib|MdePkg/Library/PeiResourcePublicationLib/PeiResourcePublicationLib.inf + ExtractGuidedSectionLib|MdePkg/Library/PeiExtractGuidedSectionLib/PeiExtractGuidedSectionLib.inf + + PeiServicesTablePointerLib|ArmPkg/Library/PeiServicesTablePointerLib/PeiServicesTablePointerLib.inf + + ArmPlatformLib|Silicon/Qemu/Library/SbsaQemuLib/SbsaQemuLib.inf + +[LibraryClasses.common.DXE_CORE] + HobLib|MdePkg/Library/DxeCoreHobLib/DxeCoreHobLib.inf + MemoryAllocationLib|MdeModulePkg/Library/DxeCoreMemoryAllocationLib/DxeCoreMemoryAllocationLib.inf + DxeCoreEntryPoint|MdePkg/Library/DxeCoreEntryPoint/DxeCoreEntryPoint.inf + ExtractGuidedSectionLib|MdePkg/Library/DxeExtractGuidedSectionLib/DxeExtractGuidedSectionLib.inf + PerformanceLib|MdeModulePkg/Library/DxeCorePerformanceLib/DxeCorePerformanceLib.inf + +[LibraryClasses.common.DXE_DRIVER] + SecurityManagementLib|MdeModulePkg/Library/DxeSecurityManagementLib/DxeSecurityManagementLib.inf + PerformanceLib|MdeModulePkg/Library/DxePerformanceLib/DxePerformanceLib.inf + MemoryAllocationLib|MdePkg/Library/UefiMemoryAllocationLib/UefiMemoryAllocationLib.inf + + NonDiscoverableDeviceRegistrationLib|MdeModulePkg/Library/NonDiscoverableDeviceRegistrationLib/NonDiscoverableDeviceRegistrationLib.inf + +[LibraryClasses.common.UEFI_APPLICATION] + PerformanceLib|MdeModulePkg/Library/DxePerformanceLib/DxePerformanceLib.inf + MemoryAllocationLib|MdePkg/Library/UefiMemoryAllocationLib/UefiMemoryAllocationLib.inf + HiiLib|MdeModulePkg/Library/UefiHiiLib/UefiHiiLib.inf + +[LibraryClasses.common.UEFI_DRIVER] + ExtractGuidedSectionLib|MdePkg/Library/DxeExtractGuidedSectionLib/DxeExtractGuidedSectionLib.inf + PerformanceLib|MdeModulePkg/Library/DxePerformanceLib/DxePerformanceLib.inf + MemoryAllocationLib|MdePkg/Library/UefiMemoryAllocationLib/UefiMemoryAllocationLib.inf + + UefiScsiLib|MdePkg/Library/UefiScsiLib/UefiScsiLib.inf + +[LibraryClasses.common.DXE_RUNTIME_DRIVER] + MemoryAllocationLib|MdePkg/Library/UefiMemoryAllocationLib/UefiMemoryAllocationLib.inf + CapsuleLib|MdeModulePkg/Library/DxeCapsuleLibNull/DxeCapsuleLibNull.inf +!if $(TARGET) != RELEASE + DebugLib|MdePkg/Library/DxeRuntimeDebugLibSerialPort/DxeRuntimeDebugLibSerialPort.inf +!endif + + BaseCryptLib|CryptoPkg/Library/BaseCryptLib/RuntimeCryptLib.inf + +################################################################################################### +# BuildOptions Section - Define the module specific tool chain flags that should be used as +# the default flags for a module. These flags are appended to any +# standard flags that are defined by the build process. +################################################################################################### + +[BuildOptions.common.EDKII.DXE_RUNTIME_DRIVER] + GCC:*_*_AARCH64_DLINK_FLAGS = -z common-page-size=0x10000 + +[BuildOptions] + GCC:RELEASE_*_*_CC_FLAGS = -DMDEPKG_NDEBUG + +################################################################################ +# +# Pcd Section - list of all EDK II PCD Entries defined by this Platform +# +################################################################################ + +[PcdsFeatureFlag.common] + gEfiMdeModulePkgTokenSpaceGuid.PcdHiiOsRuntimeSupport|FALSE + + # Use the Vector Table location in CpuDxe. We will not copy the Vector Table at PcdCpuVectorBaseAddress + gArmTokenSpaceGuid.PcdRelocateVectorTable|FALSE + + gEmbeddedTokenSpaceGuid.PcdPrePiProduceMemoryTypeInformationHob|TRUE + + gEfiMdeModulePkgTokenSpaceGuid.PcdTurnOffUsbLegacySupport|TRUE + + gUefiOvmfPkgTokenSpaceGuid.PcdQemuBootOrderPciTranslation|TRUE + gUefiOvmfPkgTokenSpaceGuid.PcdQemuBootOrderMmioTranslation|TRUE + + ## If TRUE, Graphics Output Protocol will be installed on virtual handle created by ConsplitterDxe. + # It could be set FALSE to save size. + gEfiMdeModulePkgTokenSpaceGuid.PcdConOutGopSupport|TRUE + gEfiMdeModulePkgTokenSpaceGuid.PcdConOutUgaSupport|FALSE + + # + # Activate AcpiSdtProtocol + # + gEfiMdeModulePkgTokenSpaceGuid.PcdInstallAcpiSdtProtocol|TRUE + +[PcdsFixedAtBuild.common] + gEfiMdePkgTokenSpaceGuid.PcdMaximumUnicodeStringLength|1000000 + gEfiMdePkgTokenSpaceGuid.PcdMaximumAsciiStringLength|1000000 + gEfiMdePkgTokenSpaceGuid.PcdMaximumLinkedListLength|1000000 + gEfiMdePkgTokenSpaceGuid.PcdSpinLockTimeout|10000000 + gEfiMdePkgTokenSpaceGuid.PcdDebugClearMemoryValue|0xAF + gEfiMdePkgTokenSpaceGuid.PcdPostCodePropertyMask|0 + gEfiMdePkgTokenSpaceGuid.PcdUefiLibMaxPrintBufferSize|320 + + # DEBUG_ASSERT_ENABLED 0x01 + # DEBUG_PRINT_ENABLED 0x02 + # DEBUG_CODE_ENABLED 0x04 + # CLEAR_MEMORY_ENABLED 0x08 + # ASSERT_BREAKPOINT_ENABLED 0x10 + # ASSERT_DEADLOOP_ENABLED 0x20 +!if $(TARGET) == RELEASE + gEfiMdePkgTokenSpaceGuid.PcdDebugPropertyMask|0x21 +!else + gEfiMdePkgTokenSpaceGuid.PcdDebugPropertyMask|0x2f +!endif + + # DEBUG_INIT 0x00000001 // Initialization + # DEBUG_WARN 0x00000002 // Warnings + # DEBUG_LOAD 0x00000004 // Load events + # DEBUG_FS 0x00000008 // EFI File system + # DEBUG_POOL 0x00000010 // Alloc & Free (pool) + # DEBUG_PAGE 0x00000020 // Alloc & Free (page) + # DEBUG_INFO 0x00000040 // Informational debug messages + # DEBUG_DISPATCH 0x00000080 // PEI/DXE/SMM Dispatchers + # DEBUG_VARIABLE 0x00000100 // Variable + # DEBUG_BM 0x00000400 // Boot Manager + # DEBUG_BLKIO 0x00001000 // BlkIo Driver + # DEBUG_NET 0x00004000 // SNP Driver + # DEBUG_UNDI 0x00010000 // UNDI Driver + # DEBUG_LOADFILE 0x00020000 // LoadFile + # DEBUG_EVENT 0x00080000 // Event messages + # DEBUG_GCD 0x00100000 // Global Coherency Database changes + # DEBUG_CACHE 0x00200000 // Memory range cachability changes + # DEBUG_VERBOSE 0x00400000 // Detailed debug messages that may + # // significantly impact boot performance + # DEBUG_ERROR 0x80000000 // Error + gEfiMdePkgTokenSpaceGuid.PcdDebugPrintErrorLevel|$(DEBUG_PRINT_ERROR_LEVEL) + + # + # Optional feature to help prevent EFI memory map fragments + # Turned on and off via: PcdPrePiProduceMemoryTypeInformationHob + # Values are in EFI Pages (4K). DXE Core will make sure that + # at least this much of each type of memory can be allocated + # from a single memory range. This way you only end up with + # maximum of two fragements for each type in the memory map + # (the memory used, and the free memory that was prereserved + # but not used). + # + gEmbeddedTokenSpaceGuid.PcdMemoryTypeEfiACPIReclaimMemory|0 + gEmbeddedTokenSpaceGuid.PcdMemoryTypeEfiACPIMemoryNVS|0 + gEmbeddedTokenSpaceGuid.PcdMemoryTypeEfiReservedMemoryType|0 + gEmbeddedTokenSpaceGuid.PcdMemoryTypeEfiRuntimeServicesData|600 + gEmbeddedTokenSpaceGuid.PcdMemoryTypeEfiRuntimeServicesCode|400 + gEmbeddedTokenSpaceGuid.PcdMemoryTypeEfiBootServicesCode|1500 + gEmbeddedTokenSpaceGuid.PcdMemoryTypeEfiBootServicesData|12000 + gEmbeddedTokenSpaceGuid.PcdMemoryTypeEfiLoaderCode|20 + gEmbeddedTokenSpaceGuid.PcdMemoryTypeEfiLoaderData|0 + + # override the default values from SecurityPkg to ensure images from all sources are verified in secure boot + gEfiSecurityPkgTokenSpaceGuid.PcdOptionRomImageVerificationPolicy|0x04 + gEfiSecurityPkgTokenSpaceGuid.PcdFixedMediaImageVerificationPolicy|0x04 + gEfiSecurityPkgTokenSpaceGuid.PcdRemovableMediaImageVerificationPolicy|0x04 + + # Set terminal type to TtyTerm, the value encoded is EFI_TTY_TERM_GUID + gArmVirtTokenSpaceGuid.PcdTerminalTypeGuidBuffer|{0x80, 0x6d, 0x91, 0x7d, 0xb1, 0x5b, 0x8c, 0x45, 0xa4, 0x8f, 0xe2, 0x5f, 0xdd, 0x51, 0xef, 0x94} + + # + # Enable strict image permissions for all images. (This applies + # only to images that were built with >= 4 KB section alignment.) + # + gEfiMdeModulePkgTokenSpaceGuid.PcdImageProtectionPolicy|0x3 + + # + # Enable NX memory protection for all non-code regions, including OEM and OS + # reserved ones, with the exception of LoaderData regions, of which OS loaders + # (i.e., GRUB) may assume that its contents are executable. + # + gEfiMdeModulePkgTokenSpaceGuid.PcdDxeNxMemoryProtectionPolicy|0xC000000000007FD1 + + # + # Enable the non-executable DXE stack. (This gets set up by DxeIpl) + # + gEfiMdeModulePkgTokenSpaceGuid.PcdSetNxForStack|TRUE + + gArmPlatformTokenSpaceGuid.PcdCoreCount|1 + gArmTokenSpaceGuid.PcdVFPEnabled|1 + + # System Memory Base -- fixed + gArmTokenSpaceGuid.PcdSystemMemoryBase|0x10000000000 + + # RAD no DT + # initial location of the device tree blob passed by QEMU -- base of DRAM + # gArmVirtTokenSpaceGuid.PcdDeviceTreeInitialBaseAddress|0x10000000000 + + # Space for 32 stacks + gArmPlatformTokenSpaceGuid.PcdCPUCoresStackBase|0x1000007c000 + gArmPlatformTokenSpaceGuid.PcdCPUCorePrimaryStackSize|0x4000 + gEfiMdeModulePkgTokenSpaceGuid.PcdMaxVariableSize|0x2000 + gEfiMdeModulePkgTokenSpaceGuid.PcdMaxAuthVariableSize|0x2800 + + # Size of the region used by UEFI in permanent memory (Reserved 64MB) + gArmPlatformTokenSpaceGuid.PcdSystemMemoryUefiRegionSize|0x04000000 + + # + # ARM General Interrupt Controller + # + gArmTokenSpaceGuid.PcdGicDistributorBase|0x40060000 + gArmTokenSpaceGuid.PcdGicRedistributorsBase|0x40080000 + + # + # ARM PrimeCell + # + + ## Default Terminal Type + ## 0-PCANSI, 1-VT100, 2-VT00+, 3-UTF8, 4-TTYTERM + gEfiMdePkgTokenSpaceGuid.PcdDefaultTerminalType|4 + + # + # ARM Virtual Architectural Timer -- fetch frequency from QEMU (TCG) or KVM + # + gArmTokenSpaceGuid.PcdArmArchTimerFreqInHz|0 + + gEfiNetworkPkgTokenSpaceGuid.PcdAllowHttpConnections|TRUE + + gEfiMdeModulePkgTokenSpaceGuid.PcdResetOnMemoryTypeInformationChange|FALSE + gEfiMdeModulePkgTokenSpaceGuid.PcdBootManagerMenuFile|{ 0x21, 0xaa, 0x2c, 0x46, 0x14, 0x76, 0x03, 0x45, 0x83, 0x6e, 0x8a, 0xb6, 0xf4, 0x66, 0x23, 0x31 } + + # + # The maximum physical I/O addressability of the processor, set with + # BuildCpuHob(). + # + gEmbeddedTokenSpaceGuid.PcdPrePiCpuIoSize|16 + + # Non discoverable devices (AHCI,EHCI) + gArmVirtSbsaQemuPlatformTokenSpaceGuid.PcdPlatformAhciBase|0x60100000 + gArmVirtSbsaQemuPlatformTokenSpaceGuid.PcdPlatformAhciSize|0x00010000 + # RAD missing EHCI here + gArmVirtSbsaQemuPlatformTokenSpaceGuid.PcdPlatformEhciBase|0x60110000 + gArmVirtSbsaQemuPlatformTokenSpaceGuid.PcdPlatformEhciSize|0x00010000 + + # PL011 - Serial Terminal + gEfiMdeModulePkgTokenSpaceGuid.PcdSerialRegisterBase|0x60000000 + gEfiMdePkgTokenSpaceGuid.PcdUartDefaultBaudRate|38400 + gEfiMdePkgTokenSpaceGuid.PcdUartDefaultDataBits|8 + gEfiMdePkgTokenSpaceGuid.PcdUartDefaultParity|0 + gEfiMdePkgTokenSpaceGuid.PcdUartDefaultStopBits|0 + + # Timer IRQs + # PPI #13 + gArmTokenSpaceGuid.PcdArmArchTimerSecIntrNum|29 + # PPI #14 + gArmTokenSpaceGuid.PcdArmArchTimerIntrNum|30 + # PPI #11 + gArmTokenSpaceGuid.PcdArmArchTimerVirtIntrNum|27 + # PPI #10 + gArmTokenSpaceGuid.PcdArmArchTimerHypIntrNum|26 + + ## PL031 RealTimeClock + gArmPlatformTokenSpaceGuid.PcdPL031RtcBase|0x60010000 + + # Clearing BIT0 in this PCD prevents installing a 32-bit SMBIOS entry point, + # if the entry point version is >= 3.0. AARCH64 OSes cannot assume the + # presence of the 32-bit entry point anyway (because many AARCH64 systems + # don't have 32-bit addressable physical RAM), and the additional allocations + # below 4 GB needlessly fragment the memory map. So expose the 64-bit entry + # point only, for entry point versions >= 3.0. + gEfiMdeModulePkgTokenSpaceGuid.PcdSmbiosEntryPointProvideMethod|0x2 + + # ACPI predates the AARCH64 architecture by 5 versions, so + # we only target OSes that support ACPI v5.0 or later + gEfiMdeModulePkgTokenSpaceGuid.PcdAcpiExposedTableVersions|0x20 + + # + # PLDA PCI Root Complex + # + # ECAM size == 0x10000000 + gArmTokenSpaceGuid.PcdPciBusMin|0 + gArmTokenSpaceGuid.PcdPciBusMax|255 + gArmTokenSpaceGuid.PcdPciIoBase|0x0 + gArmTokenSpaceGuid.PcdPciIoSize|0x00010000 + gArmTokenSpaceGuid.PcdPciMmio32Base|0x80000000 + gArmTokenSpaceGuid.PcdPciMmio32Size|0x70000000 + gArmTokenSpaceGuid.PcdPciMmio64Base|0x100000000 + gArmTokenSpaceGuid.PcdPciMmio64Size|0xFF00000000 + + # set PcdPciExpressBaseAddress to MAX_UINT64, which signifies that this + # PCD and PcdPciDisableBusEnumeration have not been assigned yet + gEfiMdePkgTokenSpaceGuid.PcdPciExpressBaseAddress|0xf0000000 + gArmTokenSpaceGuid.PcdPciIoTranslation|0x7fff0000 + gArmTokenSpaceGuid.PcdPciMmio32Translation|0x0 + gArmTokenSpaceGuid.PcdPciMmio64Translation|0x0 + ## If TRUE, OvmfPkg/AcpiPlatformDxe will not wait for PCI + # enumeration to complete before installing ACPI tables. + gEfiMdeModulePkgTokenSpaceGuid.PcdPciDisableBusEnumeration|FALSE + +[PcdsDynamicDefault.common] + gEfiMdePkgTokenSpaceGuid.PcdPlatformBootTimeOut|3 + + + # System Memory Size -- 128 MB initially, actual size will be fetched from DT + # RAD as no DT will be used we should pass this by some other method + gArmTokenSpaceGuid.PcdSystemMemorySize|0x08000000 + + # + # Set video resolution for boot options + # PlatformDxe can set the former at runtime. + # + gEfiMdeModulePkgTokenSpaceGuid.PcdVideoHorizontalResolution|800 + gEfiMdeModulePkgTokenSpaceGuid.PcdVideoVerticalResolution|600 + # Set video resolution for text setup. + gEfiMdeModulePkgTokenSpaceGuid.PcdSetupVideoHorizontalResolution|640 + gEfiMdeModulePkgTokenSpaceGuid.PcdSetupVideoVerticalResolution|480 + + # + # SMBIOS entry point version + # + gEfiMdeModulePkgTokenSpaceGuid.PcdSmbiosVersion|0x0300 + gEfiMdeModulePkgTokenSpaceGuid.PcdSmbiosDocRev|0x0 + +################################################################################ +# +# Components Section - list of all EDK II Modules needed by this Platform +# +################################################################################ + +[Components.common] + # + # Ramdisk support + # + MdeModulePkg/Universal/Disk/RamDiskDxe/RamDiskDxe.inf + + # + # UEFI application (Shell Embedded Boot Loader) + # + ShellPkg/DynamicCommand/TftpDynamicCommand/TftpDynamicCommand.inf { + <PcdsFixedAtBuild> + gEfiShellPkgTokenSpaceGuid.PcdShellLibAutoInitialize|FALSE + } + ShellPkg/Application/Shell/Shell.inf { + <LibraryClasses> + ShellCommandLib|ShellPkg/Library/UefiShellCommandLib/UefiShellCommandLib.inf + NULL|ShellPkg/Library/UefiShellAcpiViewCommandLib/UefiShellAcpiViewCommandLib.inf + NULL|ShellPkg/Library/UefiShellLevel2CommandsLib/UefiShellLevel2CommandsLib.inf + NULL|ShellPkg/Library/UefiShellLevel1CommandsLib/UefiShellLevel1CommandsLib.inf + NULL|ShellPkg/Library/UefiShellLevel3CommandsLib/UefiShellLevel3CommandsLib.inf + NULL|ShellPkg/Library/UefiShellDriver1CommandsLib/UefiShellDriver1CommandsLib.inf + NULL|ShellPkg/Library/UefiShellDebug1CommandsLib/UefiShellDebug1CommandsLib.inf + NULL|ShellPkg/Library/UefiShellInstall1CommandsLib/UefiShellInstall1CommandsLib.inf + NULL|ShellPkg/Library/UefiShellNetwork1CommandsLib/UefiShellNetwork1CommandsLib.inf +!if $(NETWORK_IP6_ENABLE) == TRUE + NULL|ShellPkg/Library/UefiShellNetwork2CommandsLib/UefiShellNetwork2CommandsLib.inf +!endif + HandleParsingLib|ShellPkg/Library/UefiHandleParsingLib/UefiHandleParsingLib.inf + PrintLib|MdePkg/Library/BasePrintLib/BasePrintLib.inf + BcfgCommandLib|ShellPkg/Library/UefiShellBcfgCommandLib/UefiShellBcfgCommandLib.inf + ShellLib|ShellPkg/Library/UefiShellLib/UefiShellLib.inf + + <PcdsFixedAtBuild> + gEfiMdePkgTokenSpaceGuid.PcdDebugPropertyMask|0xFF + gEfiShellPkgTokenSpaceGuid.PcdShellLibAutoInitialize|FALSE + gEfiMdePkgTokenSpaceGuid.PcdUefiLibMaxPrintBufferSize|8000 + } + + # + # PEI Phase modules + # + ArmPlatformPkg/PrePeiCore/PrePeiCoreUniCore.inf + MdeModulePkg/Core/Pei/PeiMain.inf + MdeModulePkg/Universal/PCD/Pei/Pcd.inf { + <LibraryClasses> + PcdLib|MdePkg/Library/BasePcdLibNull/BasePcdLibNull.inf + } + ArmPlatformPkg/PlatformPei/PlatformPeim.inf + ArmPlatformPkg/MemoryInitPei/MemoryInitPeim.inf + ArmPkg/Drivers/CpuPei/CpuPei.inf + + + MdeModulePkg/Core/DxeIplPeim/DxeIpl.inf { + <LibraryClasses> + NULL|MdeModulePkg/Library/LzmaCustomDecompressLib/LzmaCustomDecompressLib.inf + } + + # + # DXE + # + MdeModulePkg/Core/Dxe/DxeMain.inf { + <LibraryClasses> + NULL|MdeModulePkg/Library/DxeCrc32GuidedSectionExtractLib/DxeCrc32GuidedSectionExtractLib.inf + DevicePathLib|MdePkg/Library/UefiDevicePathLib/UefiDevicePathLib.inf + } + MdeModulePkg/Universal/PCD/Dxe/Pcd.inf { + <LibraryClasses> + PcdLib|MdePkg/Library/BasePcdLibNull/BasePcdLibNull.inf + } + + # + # Architectural Protocols + # + ArmPkg/Drivers/CpuDxe/CpuDxe.inf + MdeModulePkg/Core/RuntimeDxe/RuntimeDxe.inf + MdeModulePkg/Universal/Variable/RuntimeDxe/VariableRuntimeDxe.inf { + <LibraryClasses> + NULL|MdeModulePkg/Library/VarCheckUefiLib/VarCheckUefiLib.inf + # don't use unaligned CopyMem () on the UEFI varstore NOR flash region + BaseMemoryLib|MdePkg/Library/BaseMemoryLib/BaseMemoryLib.inf + } + MdeModulePkg/Universal/SecurityStubDxe/SecurityStubDxe.inf { + <LibraryClasses> + NULL|SecurityPkg/Library/DxeImageVerificationLib/DxeImageVerificationLib.inf + } + SecurityPkg/VariableAuthenticated/SecureBootConfigDxe/SecureBootConfigDxe.inf + MdeModulePkg/Universal/CapsuleRuntimeDxe/CapsuleRuntimeDxe.inf + MdeModulePkg/Universal/FaultTolerantWriteDxe/FaultTolerantWriteDxe.inf + MdeModulePkg/Universal/MonotonicCounterRuntimeDxe/MonotonicCounterRuntimeDxe.inf + MdeModulePkg/Universal/ResetSystemRuntimeDxe/ResetSystemRuntimeDxe.inf + EmbeddedPkg/RealTimeClockRuntimeDxe/RealTimeClockRuntimeDxe.inf + EmbeddedPkg/MetronomeDxe/MetronomeDxe.inf + + MdeModulePkg/Universal/Console/ConPlatformDxe/ConPlatformDxe.inf + MdeModulePkg/Universal/Console/ConSplitterDxe/ConSplitterDxe.inf + MdeModulePkg/Universal/Console/GraphicsConsoleDxe/GraphicsConsoleDxe.inf + MdeModulePkg/Universal/Console/TerminalDxe/TerminalDxe.inf + MdeModulePkg/Universal/SerialDxe/SerialDxe.inf + + MdeModulePkg/Universal/HiiDatabaseDxe/HiiDatabaseDxe.inf + + ArmPkg/Drivers/ArmGic/ArmGicDxe.inf + ArmPkg/Drivers/TimerDxe/TimerDxe.inf + ArmPlatformPkg/Drivers/NorFlashDxe/NorFlashDxe.inf + MdeModulePkg/Universal/WatchdogTimerDxe/WatchdogTimer.inf + + # + # FAT filesystem + GPT/MBR partitioning + # + MdeModulePkg/Universal/Disk/DiskIoDxe/DiskIoDxe.inf + MdeModulePkg/Universal/Disk/PartitionDxe/PartitionDxe.inf + MdeModulePkg/Universal/Disk/UnicodeCollation/EnglishDxe/EnglishDxe.inf + FatPkg/EnhancedFatDxe/Fat.inf + MdeModulePkg/Universal/Disk/UdfDxe/UdfDxe.inf + + # + # Bds + # + MdeModulePkg/Universal/DevicePathDxe/DevicePathDxe.inf { + <LibraryClasses> + DevicePathLib|MdePkg/Library/UefiDevicePathLib/UefiDevicePathLib.inf + PcdLib|MdePkg/Library/BasePcdLibNull/BasePcdLibNull.inf + } + MdeModulePkg/Universal/DisplayEngineDxe/DisplayEngineDxe.inf + MdeModulePkg/Universal/SetupBrowserDxe/SetupBrowserDxe.inf + MdeModulePkg/Universal/DriverHealthManagerDxe/DriverHealthManagerDxe.inf + MdeModulePkg/Universal/BdsDxe/BdsDxe.inf + MdeModulePkg/Logo/LogoDxe.inf + MdeModulePkg/Application/UiApp/UiApp.inf { + <LibraryClasses> + NULL|MdeModulePkg/Library/DeviceManagerUiLib/DeviceManagerUiLib.inf + NULL|MdeModulePkg/Library/BootManagerUiLib/BootManagerUiLib.inf + NULL|MdeModulePkg/Library/BootMaintenanceManagerUiLib/BootMaintenanceManagerUiLib.inf + } + + # + # Networking stack + # +!include NetworkPkg/Network.dsc.inc + + # NonDiscoverableDevices + Silicon/Qemu/Drivers/SbsaQemuPlatformDxe/SbsaQemuPlatformDxe.inf + MdeModulePkg/Bus/Pci/NonDiscoverablePciDeviceDxe/NonDiscoverablePciDeviceDxe.inf + + # IDE/AHCI Support + OvmfPkg/SataControllerDxe/SataControllerDxe.inf + MdeModulePkg/Bus/Ata/AtaAtapiPassThru/AtaAtapiPassThru.inf + MdeModulePkg/Bus/Ata/AtaBusDxe/AtaBusDxe.inf + + # + # SCSI Bus and Disk Driver + # + MdeModulePkg/Bus/Scsi/ScsiBusDxe/ScsiBusDxe.inf + MdeModulePkg/Bus/Scsi/ScsiDiskDxe/ScsiDiskDxe.inf + + # + # SMBIOS Support + # + # RAD temporaly dissabled +#MdeModulePkg/Universal/SmbiosDxe/SmbiosDxe.inf { +# <LibraryClasses> +# NULL|OvmfPkg/Library/SmbiosVersionLib/DetectSmbiosVersionLib.inf +# } +# OvmfPkg/SmbiosPlatformDxe/SmbiosPlatformDxe.inf + + # + # PCI support + # + ArmPkg/Drivers/ArmPciCpuIo2Dxe/ArmPciCpuIo2Dxe.inf + MdeModulePkg/Bus/Pci/PciHostBridgeDxe/PciHostBridgeDxe.inf + MdeModulePkg/Bus/Pci/PciBusDxe/PciBusDxe.inf + + # + # Video support (VGA) + # + OvmfPkg/QemuVideoDxe/QemuVideoDxe.inf + + # + # USB Support + # + MdeModulePkg/Bus/Pci/UhciDxe/UhciDxe.inf + MdeModulePkg/Bus/Pci/EhciDxe/EhciDxe.inf + MdeModulePkg/Bus/Pci/XhciDxe/XhciDxe.inf + MdeModulePkg/Bus/Usb/UsbBusDxe/UsbBusDxe.inf + MdeModulePkg/Bus/Usb/UsbKbDxe/UsbKbDxe.inf + MdeModulePkg/Bus/Usb/UsbMassStorageDxe/UsbMassStorageDxe.inf + +[Components.AARCH64] + # + # ACPI Support + # + MdeModulePkg/Universal/Acpi/AcpiTableDxe/AcpiTableDxe.inf + # RAD do not force dependency on EDKII_PLATFORM_HAS_ACPI_GUID by + # PlatformHasAcpiLib.inf as we only use ACPI + + # + # EBC support + # + MdeModulePkg/Universal/EbcDxe/EbcDxe.inf + + MdeModulePkg/Universal/Acpi/BootGraphicsResourceTableDxe/BootGraphicsResourceTableDxe.inf + diff --git a/Platform/Qemu/SbsaQemu/SbsaQemu.fdf b/Platform/Qemu/SbsaQemu/SbsaQemu.fdf new file mode 100644 index 0000000000..159a301510 --- /dev/null +++ b/Platform/Qemu/SbsaQemu/SbsaQemu.fdf @@ -0,0 +1,328 @@ +# +# Copyright (c) 2019, Linaro Limited. All rights reserved. +# +# This program and the accompanying materials +# are licensed and made available under the terms and conditions of the BSD License +# which accompanies this distribution. The full text of the license may be found at +# http://opensource.org/licenses/bsd-license.php +# +# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, +# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. +# + +################################################################################ +# +# FD Section for FLASH0 +# +# The [FD] Section is made up of the definition statements and a +# description of what goes into the Flash Device Image. Each FD section +# defines one flash "device" image. A flash device image may be one of +# the following: Removable media bootable image (like a boot floppy +# image,) an Option ROM image (that would be "flashed" into an add-in +# card,) a System "Flash" image (that would be burned into a system's +# flash) or an Update ("Capsule") image that will be used to update and +# existing system flash. +# +################################################################################ + +[FD.SBSA_FLASH0] +BaseAddress = 0x00000000 +Size = 0x00200000 +ErasePolarity = 1 +BlockSize = 0x00001000 +NumBlocks = 0x200 + +################################################################################ +# +# Following are lists of FD Region layout which correspond to the locations of different +# images within the flash device. +# +# Regions must be defined in ascending order and may not overlap. +# +# A Layout Region start with a eight digit hex offset (leading "0x" required) followed by +# the pipe "|" character, followed by the size of the region, also in hex with the leading +# "0x" characters. Like: +# Offset|Size +# PcdOffsetCName|PcdSizeCName +# RegionType <FV, DATA, or FILE> +# +################################################################################ +## Place for Trusted Firmware +# flash0 is secure so we put here the BL1 +0x00000000|0x00008000 +FILE = bl1.bin + +# and FIP (BL2 + BL31) +0x00008000|0x00020000 +FILE = fip.bin + +################################################################################ +# +# FD Section for FLASH1 +# +################################################################################ + +[FD.SBSA_FLASH1] +BaseAddress = 0x10000000|gArmTokenSpaceGuid.PcdFdBaseAddress +Size = 0x002C0000|gArmTokenSpaceGuid.PcdFdSize +ErasePolarity = 1 +BlockSize = 0x00001000 +NumBlocks = 0x2C0 + +## Place for EFI (BL33) +# This offset (if any as it is 0x0 currently) + BaseAddress (0x10000000) must be set in PRELOADED_BL33_BASE at ATF +0x00000000|0x00200000 +gArmTokenSpaceGuid.PcdFvBaseAddress|gArmTokenSpaceGuid.PcdFvSize +FV = FVMAIN_COMPACT + +## Place for Variables. They share flash1 with EFI +# Must be aligned to Flash Block size 0x40000 +0x00200000|0x00040000 +gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageVariableBase|gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageVariableSize +#NV_VARIABLE_STORE +DATA = { + ## This is the EFI_FIRMWARE_VOLUME_HEADER + # ZeroVector [] + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + # FileSystemGuid: gEfiSystemNvDataFvGuid = + # { 0xFFF12B8D, 0x7696, 0x4C8B, + # { 0xA9, 0x85, 0x27, 0x47, 0x07, 0x5B, 0x4F, 0x50 }} + 0x8D, 0x2B, 0xF1, 0xFF, 0x96, 0x76, 0x8B, 0x4C, + 0xA9, 0x85, 0x27, 0x47, 0x07, 0x5B, 0x4F, 0x50, + # FvLength: 0xC0000 + 0x00, 0x00, 0x0C, 0x00, 0x00, 0x00, 0x00, 0x00, + # Signature "_FVH" # Attributes + 0x5f, 0x46, 0x56, 0x48, 0xff, 0xfe, 0x04, 0x00, + # HeaderLength # CheckSum # ExtHeaderOffset #Reserved #Revision + 0x48, 0x00, 0x28, 0x09, 0x00, 0x00, 0x00, 0x02, + # Blockmap[0]: 0x3 Blocks * 0x40000 Bytes / Block + 0x3, 0x00, 0x00, 0x00, 0x00, 0x00, 0x04, 0x00, + # Blockmap[1]: End + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + ## This is the VARIABLE_STORE_HEADER + # It is compatible with SECURE_BOOT_ENABLE == FALSE as well. + # Signature: gEfiAuthenticatedVariableGuid = + # { 0xaaf32c78, 0x947b, 0x439a, + # { 0xa1, 0x80, 0x2e, 0x14, 0x4e, 0xc3, 0x77, 0x92 }} + 0x78, 0x2c, 0xf3, 0xaa, 0x7b, 0x94, 0x9a, 0x43, + 0xa1, 0x80, 0x2e, 0x14, 0x4e, 0xc3, 0x77, 0x92, + # Size: 0x40000 (gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageVariableSize) - + # 0x48 (size of EFI_FIRMWARE_VOLUME_HEADER) = 0x3ffb8 + # This can speed up the Variable Dispatch a bit. + 0xB8, 0xFF, 0x03, 0x00, + # FORMATTED: 0x5A #HEALTHY: 0xFE #Reserved: UINT16 #Reserved1: UINT32 + 0x5A, 0xFE, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 +} + +0x00240000|0x00040000 +gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwWorkingBase|gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwWorkingSize +#NV_FTW_WORKING +DATA = { + # EFI_FAULT_TOLERANT_WORKING_BLOCK_HEADER->Signature = gEdkiiWorkingBlockSignatureGuid = + # { 0x9e58292b, 0x7c68, 0x497d, { 0xa0, 0xce, 0x65, 0x0, 0xfd, 0x9f, 0x1b, 0x95 }} + 0x2b, 0x29, 0x58, 0x9e, 0x68, 0x7c, 0x7d, 0x49, + 0xa0, 0xce, 0x65, 0x0, 0xfd, 0x9f, 0x1b, 0x95, + # Crc:UINT32 #WorkingBlockValid:1, WorkingBlockInvalid:1, Reserved + 0x5b, 0xe7, 0xc6, 0x86, 0xFE, 0xFF, 0xFF, 0xFF, + # WriteQueueSize: UINT64 + 0xE0, 0xFF, 0x03, 0x00, 0x00, 0x00, 0x00, 0x00 +} + +0x00280000|0x00040000 +gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwSpareBase|gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwSpareSize +#NV_FTW_SPARE + +################################################################################ +# +# FV Section +# +# [FV] section is used to define what components or modules are placed within a flash +# device file. This section also defines order the components and modules are positioned +# within the image. The [FV] section consists of define statements, set statements and +# module statements. +# +################################################################################ + +[FV.FvMain] +FvNameGuid = 706c8e7f-306e-4dbc-a4ca-c8615d0d1b96 +BlockSize = 0x40 +NumBlocks = 0 # This FV gets compressed so make it just big enough +FvAlignment = 16 # FV alignment and FV attributes setting. +ERASE_POLARITY = 1 +MEMORY_MAPPED = TRUE +STICKY_WRITE = TRUE +LOCK_CAP = TRUE +LOCK_STATUS = TRUE +WRITE_DISABLED_CAP = TRUE +WRITE_ENABLED_CAP = TRUE +WRITE_STATUS = TRUE +WRITE_LOCK_CAP = TRUE +WRITE_LOCK_STATUS = TRUE +READ_DISABLED_CAP = TRUE +READ_ENABLED_CAP = TRUE +READ_STATUS = TRUE +READ_LOCK_CAP = TRUE +READ_LOCK_STATUS = TRUE + + INF MdeModulePkg/Core/Dxe/DxeMain.inf + INF MdeModulePkg/Universal/PCD/Dxe/Pcd.inf + + # + # PI DXE Drivers producing Architectural Protocols (EFI Services) + # + INF ArmPkg/Drivers/CpuDxe/CpuDxe.inf + INF MdeModulePkg/Core/RuntimeDxe/RuntimeDxe.inf + INF MdeModulePkg/Universal/SecurityStubDxe/SecurityStubDxe.inf + INF MdeModulePkg/Universal/CapsuleRuntimeDxe/CapsuleRuntimeDxe.inf + INF MdeModulePkg/Universal/FaultTolerantWriteDxe/FaultTolerantWriteDxe.inf + INF MdeModulePkg/Universal/Variable/RuntimeDxe/VariableRuntimeDxe.inf + INF SecurityPkg/VariableAuthenticated/SecureBootConfigDxe/SecureBootConfigDxe.inf + INF MdeModulePkg/Universal/MonotonicCounterRuntimeDxe/MonotonicCounterRuntimeDxe.inf + INF MdeModulePkg/Universal/ResetSystemRuntimeDxe/ResetSystemRuntimeDxe.inf + INF EmbeddedPkg/RealTimeClockRuntimeDxe/RealTimeClockRuntimeDxe.inf + INF EmbeddedPkg/MetronomeDxe/MetronomeDxe.inf + INF MdeModulePkg/Universal/HiiDatabaseDxe/HiiDatabaseDxe.inf + + # + # Multiple Console IO support + # + INF MdeModulePkg/Universal/Console/ConPlatformDxe/ConPlatformDxe.inf + INF MdeModulePkg/Universal/Console/ConSplitterDxe/ConSplitterDxe.inf + INF MdeModulePkg/Universal/Console/GraphicsConsoleDxe/GraphicsConsoleDxe.inf + INF MdeModulePkg/Universal/Console/TerminalDxe/TerminalDxe.inf + INF MdeModulePkg/Universal/SerialDxe/SerialDxe.inf + + INF ArmPkg/Drivers/ArmGic/ArmGicDxe.inf + INF ArmPkg/Drivers/TimerDxe/TimerDxe.inf + INF ArmPlatformPkg/Drivers/NorFlashDxe/NorFlashDxe.inf + INF MdeModulePkg/Universal/WatchdogTimerDxe/WatchdogTimer.inf + + # + # FAT filesystem + GPT/MBR partitioning + UDF filesystem + # + INF MdeModulePkg/Universal/Disk/DiskIoDxe/DiskIoDxe.inf + INF MdeModulePkg/Universal/Disk/PartitionDxe/PartitionDxe.inf + INF FatPkg/EnhancedFatDxe/Fat.inf + INF MdeModulePkg/Universal/Disk/UnicodeCollation/EnglishDxe/EnglishDxe.inf + INF MdeModulePkg/Universal/Disk/UdfDxe/UdfDxe.inf + + # + # UEFI application (Shell Embedded Boot Loader) + # + INF ShellPkg/Application/Shell/Shell.inf + INF ShellPkg/DynamicCommand/TftpDynamicCommand/TftpDynamicCommand.inf + + # + # Bds + # + INF MdeModulePkg/Universal/DevicePathDxe/DevicePathDxe.inf + INF MdeModulePkg/Universal/DisplayEngineDxe/DisplayEngineDxe.inf + INF MdeModulePkg/Universal/SetupBrowserDxe/SetupBrowserDxe.inf + INF MdeModulePkg/Universal/DriverHealthManagerDxe/DriverHealthManagerDxe.inf + INF MdeModulePkg/Universal/BdsDxe/BdsDxe.inf + INF MdeModulePkg/Application/UiApp/UiApp.inf + + # + # Networking stack + # +!include NetworkPkg/Network.fdf.inc + + # + # SCSI Bus and Disk Driver + # + INF MdeModulePkg/Bus/Scsi/ScsiBusDxe/ScsiBusDxe.inf + INF MdeModulePkg/Bus/Scsi/ScsiDiskDxe/ScsiDiskDxe.inf + + # + # SMBIOS Support + # + # RAD temporarly disabled +# INF MdeModulePkg/Universal/SmbiosDxe/SmbiosDxe.inf +# INF OvmfPkg/SmbiosPlatformDxe/SmbiosPlatformDxe.inf + + # + # ACPI Support + # + INF MdeModulePkg/Universal/Acpi/AcpiTableDxe/AcpiTableDxe.inf + INF MdeModulePkg/Universal/Acpi/BootGraphicsResourceTableDxe/BootGraphicsResourceTableDxe.inf + + # + # EBC support + # + INF MdeModulePkg/Universal/EbcDxe/EbcDxe.inf + + # + # PCI support + # + INF ArmPkg/Drivers/ArmPciCpuIo2Dxe/ArmPciCpuIo2Dxe.inf + INF MdeModulePkg/Bus/Pci/PciHostBridgeDxe/PciHostBridgeDxe.inf + INF MdeModulePkg/Bus/Pci/PciBusDxe/PciBusDxe.inf + + # + # USB Support + # + INF MdeModulePkg/Bus/Pci/UhciDxe/UhciDxe.inf + INF MdeModulePkg/Bus/Pci/EhciDxe/EhciDxe.inf + INF MdeModulePkg/Bus/Pci/XhciDxe/XhciDxe.inf + INF MdeModulePkg/Bus/Usb/UsbBusDxe/UsbBusDxe.inf + INF MdeModulePkg/Bus/Usb/UsbKbDxe/UsbKbDxe.inf + INF MdeModulePkg/Bus/Usb/UsbMassStorageDxe/UsbMassStorageDxe.inf + + # + # TianoCore logo (splash screen) + # + INF MdeModulePkg/Logo/LogoDxe.inf + + # + # Ramdisk support + # + INF MdeModulePkg/Universal/Disk/RamDiskDxe/RamDiskDxe.inf + +[FV.FVMAIN_COMPACT] +FvAlignment = 16 +ERASE_POLARITY = 1 +MEMORY_MAPPED = TRUE +STICKY_WRITE = TRUE +LOCK_CAP = TRUE +LOCK_STATUS = TRUE +WRITE_DISABLED_CAP = TRUE +WRITE_ENABLED_CAP = TRUE +WRITE_STATUS = TRUE +WRITE_LOCK_CAP = TRUE +WRITE_LOCK_STATUS = TRUE +READ_DISABLED_CAP = TRUE +READ_ENABLED_CAP = TRUE +READ_STATUS = TRUE +READ_LOCK_CAP = TRUE +READ_LOCK_STATUS = TRUE + + INF ArmPlatformPkg/PrePeiCore/PrePeiCoreUniCore.inf + INF MdeModulePkg/Core/Pei/PeiMain.inf + INF ArmPlatformPkg/PlatformPei/PlatformPeim.inf + INF ArmPlatformPkg/MemoryInitPei/MemoryInitPeim.inf + INF ArmPkg/Drivers/CpuPei/CpuPei.inf + INF MdeModulePkg/Universal/PCD/Pei/Pcd.inf + INF MdeModulePkg/Core/DxeIplPeim/DxeIpl.inf + + # IDE/AHCI Support + INF OvmfPkg/SataControllerDxe/SataControllerDxe.inf + INF MdeModulePkg/Bus/Ata/AtaAtapiPassThru/AtaAtapiPassThru.inf + INF MdeModulePkg/Bus/Ata/AtaBusDxe/AtaBusDxe.inf + INF MdeModulePkg/Bus/Scsi/ScsiBusDxe/ScsiBusDxe.inf + INF MdeModulePkg/Bus/Scsi/ScsiDiskDxe/ScsiDiskDxe.inf + + # NonDiscoverableDevices + INF Silicon/Qemu/Drivers/SbsaQemuPlatformDxe/SbsaQemuPlatformDxe.inf + INF MdeModulePkg/Bus/Pci/NonDiscoverablePciDeviceDxe/NonDiscoverablePciDeviceDxe.inf + + #VGA + INF OvmfPkg/QemuVideoDxe/QemuVideoDxe.inf + + FILE FV_IMAGE = 9E21FD93-9C72-4c15-8C4B-E77F1DB2D792 { + SECTION GUIDED EE4E5898-3914-4259-9D6E-DC7BD79403CF PROCESSING_REQUIRED = TRUE { + SECTION FV_IMAGE = FVMAIN + } + } + +!include ArmVirtPkg/ArmVirtRules.fdf.inc diff --git a/Silicon/Qemu/Drivers/SbsaQemuPlatformDxe/SbsaQemuPlatformDxe.inf b/Silicon/Qemu/Drivers/SbsaQemuPlatformDxe/SbsaQemuPlatformDxe.inf new file mode 100644 index 0000000000..83679d1932 --- /dev/null +++ b/Silicon/Qemu/Drivers/SbsaQemuPlatformDxe/SbsaQemuPlatformDxe.inf @@ -0,0 +1,48 @@ +## @file +# This driver effectuates SbsaQemu platform configuration settings +# +# Copyright (c) 2019, Linaro Ltd. All rights reserved. +# +# This program and the accompanying materials are +# licensed and made available under the terms and conditions of the BSD License +# which accompanies this distribution. The full text of the license may be found at +# http://opensource.org/licenses/bsd-license.php +# +# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, +# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. +# +## + +[Defines] + INF_VERSION = 0x0001001c + BASE_NAME = SbsaQemuPlatformDxe + FILE_GUID = 6c592dc9-76c8-474f-93b2-bf1e8f15ae34 + MODULE_TYPE = DXE_DRIVER + VERSION_STRING = 1.0 + + ENTRY_POINT = InitializeSbsaQemuPlatformDxe + +[Sources] + SbsaQemuPlatformDxe.c + +[Packages] +# RAD To trzeba jeszcze przesortowac i usunac zbedne + EmbeddedPkg/EmbeddedPkg.dec + MdeModulePkg/MdeModulePkg.dec + MdePkg/MdePkg.dec + ArmVirtPkg/ArmVirtPkg.dec + Silicon/Qemu/SbsaQemuPkg.dec + +[LibraryClasses] + PcdLib + DebugLib + NonDiscoverableDeviceRegistrationLib + UefiDriverEntryPoint + +[Pcd] + gArmVirtSbsaQemuPlatformTokenSpaceGuid.PcdPlatformAhciBase + gArmVirtSbsaQemuPlatformTokenSpaceGuid.PcdPlatformAhciSize + +[Depex] + TRUE + diff --git a/Silicon/Qemu/Library/SbsaQemuLib/SbsaQemuLib.inf b/Silicon/Qemu/Library/SbsaQemuLib/SbsaQemuLib.inf new file mode 100644 index 0000000000..465eb834cf --- /dev/null +++ b/Silicon/Qemu/Library/SbsaQemuLib/SbsaQemuLib.inf @@ -0,0 +1,53 @@ +#/* @file +# +# Copyright (c) 2019, Linaro Limited. All rights reserved. +# +# This program and the accompanying materials are licensed and made available +# under the terms and conditions of the BSD License which accompanies this +# distribution. The full text of the license may be found at +# http://opensource.org/licenses/bsd-license.php +# +# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, +# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. +# +#*/ + +[Defines] + INF_VERSION = 0x0001001c + BASE_NAME = SbsaQemuLib + FILE_GUID = 6454006f-4236-46e2-9be4-4bba8d4b29fb + MODULE_TYPE = BASE + VERSION_STRING = 1.0 + LIBRARY_CLASS = ArmPlatformLib + +[Sources] + SbsaQemuMem.c + SbsaQemuLib.c + SbsaQemuHelper.S + +[Packages] + MdePkg/MdePkg.dec + MdeModulePkg/MdeModulePkg.dec + ArmPkg/ArmPkg.dec + ArmPlatformPkg/ArmPlatformPkg.dec + EmbeddedPkg/EmbeddedPkg.dec + +[LibraryClasses] + ArmLib + BaseMemoryLib + DebugLib + PcdLib + MemoryAllocationLib + +[Pcd] + gArmTokenSpaceGuid.PcdSystemMemoryBase + gArmTokenSpaceGuid.PcdSystemMemorySize + +[FixedPcd] + gArmTokenSpaceGuid.PcdFdBaseAddress + gArmTokenSpaceGuid.PcdFdSize + gArmTokenSpaceGuid.PcdArmPrimaryCoreMask + gArmTokenSpaceGuid.PcdArmPrimaryCore + +[Ppis] + gArmMpCoreInfoPpiGuid diff --git a/Silicon/Qemu/Library/SbsaQemuNorFlashLib/SbsaQemuNorFlashLib.inf b/Silicon/Qemu/Library/SbsaQemuNorFlashLib/SbsaQemuNorFlashLib.inf new file mode 100644 index 0000000000..c229f4a18c --- /dev/null +++ b/Silicon/Qemu/Library/SbsaQemuNorFlashLib/SbsaQemuNorFlashLib.inf @@ -0,0 +1,35 @@ +#/** @file +# +# Component description file for SBSANorFlashQemuLib module +# +# Copyright (c) 2019, Linaro Ltd. All rights reserved. +# +# This program and the accompanying materials +# are licensed and made available under the terms and conditions of the BSD License +# which accompanies this distribution. The full text of the license may be found at +# http://opensource.org/licenses/bsd-license.php +# +# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, +# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. +# +#**/ + +[Defines] + INF_VERSION = 0x0001001c + BASE_NAME = SBSANorFlashQemuLib + FILE_GUID = c53d904d-de50-40f1-a148-a2ece48303d8 + MODULE_TYPE = BASE + VERSION_STRING = 1.0 + LIBRARY_CLASS = NorFlashPlatformLib + +[Sources.common] + SbsaQemuNorFlashLib.c + +[Packages] + MdePkg/MdePkg.dec + ArmPlatformPkg/ArmPlatformPkg.dec + ArmPkg/ArmPkg.dec + +[FixedPcd] + gArmTokenSpaceGuid.PcdFdBaseAddress + gArmTokenSpaceGuid.PcdFdSize diff --git a/Silicon/Qemu/Library/SbsaQemuPciHostBridgeLib/SbsaQemuPciHostBridgeLib.inf b/Silicon/Qemu/Library/SbsaQemuPciHostBridgeLib/SbsaQemuPciHostBridgeLib.inf new file mode 100644 index 0000000000..91daa68bbf --- /dev/null +++ b/Silicon/Qemu/Library/SbsaQemuPciHostBridgeLib/SbsaQemuPciHostBridgeLib.inf @@ -0,0 +1,55 @@ +## @file +# PCI Host Bridge Library instance for pci-ecam-generic DT nodes +# +# Copyright (c) 2019, Linaro Ltd. All rights reserved. +# +# This program and the accompanying materials are licensed and made available +# under the terms and conditions of the BSD License which accompanies this +# distribution. The full text of the license may be found at +# http://opensource.org/licenses/bsd-license.php. +# +# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, +# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR +# IMPLIED. +# +# +## + +[Defines] + INF_VERSION = 0x0001001c + BASE_NAME = SbsaQemuPciHostBridgeLib + FILE_GUID = 151dbef1-332d-4a8f-963e-b8f6bebb891d + MODULE_TYPE = DXE_DRIVER + VERSION_STRING = 1.0 + LIBRARY_CLASS = PciHostBridgeLib + +# +# The following information is for reference only and not required by the build +# tools. +# +# VALID_ARCHITECTURES = AARCH64 +# + +[Sources] + SbsaQemuPciHostBridgeLib.c + +[Packages] + ArmPkg/ArmPkg.dec + MdeModulePkg/MdeModulePkg.dec + MdePkg/MdePkg.dec + +[LibraryClasses] + DebugLib + +[FixedPcd] + gArmTokenSpaceGuid.PcdPciBusMin + gArmTokenSpaceGuid.PcdPciBusMax + gArmTokenSpaceGuid.PcdPciIoBase + gArmTokenSpaceGuid.PcdPciIoSize + gArmTokenSpaceGuid.PcdPciMmio32Base + gArmTokenSpaceGuid.PcdPciMmio32Size + gArmTokenSpaceGuid.PcdPciMmio64Base + gArmTokenSpaceGuid.PcdPciMmio64Size + +[Depex] + TRUE diff --git a/Silicon/Qemu/Drivers/SbsaQemuPlatformDxe/SbsaQemuPlatformDxe.c b/Silicon/Qemu/Drivers/SbsaQemuPlatformDxe/SbsaQemuPlatformDxe.c new file mode 100644 index 0000000000..2f6e2ac6b7 --- /dev/null +++ b/Silicon/Qemu/Drivers/SbsaQemuPlatformDxe/SbsaQemuPlatformDxe.c @@ -0,0 +1,61 @@ +/** @file +* FDT client protocol driver for qemu,mach-virt-ahci DT node +* +* Copyright (c) 2019, Linaro Ltd. All rights reserved. +* +* This program and the accompanying materials are +* licensed and made available under the terms and conditions of the BSD License +* which accompanies this distribution. The full text of the license may be found at +* http://opensource.org/licenses/bsd-license.php +* +* THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, +* WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. +* +**/ + +#include <Library/BaseLib.h> +#include <Library/PcdLib.h> +#include <Library/DebugLib.h> +#include <Library/UefiBootServicesTableLib.h> +#include <Library/UefiDriverEntryPoint.h> +#include <Library/NonDiscoverableDeviceRegistrationLib.h> + +#include <Protocol/FdtClient.h> + +EFI_STATUS +EFIAPI +InitializeSbsaQemuPlatformDxe ( + IN EFI_HANDLE ImageHandle, + IN EFI_SYSTEM_TABLE *SystemTable + ) +{ + EFI_STATUS Status; + UINTN Size; + VOID* Base; + + DEBUG ((DEBUG_INFO, "%a: InitializeSbsaQemuPlatformDxe called\n", __FUNCTION__)); + + Base = (VOID*)(UINTN)PcdGet64 (PcdPlatformAhciBase); + ASSERT (Base != NULL); + Size = (UINTN)PcdGet32 (PcdPlatformAhciSize); + ASSERT (Size != 0); + + DEBUG ((DEBUG_INFO, "%a: Got platform AHCI %llx %u\n", + __FUNCTION__, Base, Size)); + + Status = RegisterNonDiscoverableMmioDevice ( + NonDiscoverableDeviceTypeAhci, + NonDiscoverableDeviceDmaTypeCoherent, + NULL, + NULL, + 1, + Base, Size); + + if (EFI_ERROR(Status)) { + DEBUG ((DEBUG_ERROR, "%a: NonDiscoverable: Cannot install AHCI device @%p" + "(Staus == %r)\n", __FUNCTION__, Base, Status)); + return Status; + } + + return EFI_SUCCESS; +} diff --git a/Silicon/Qemu/Library/SbsaQemuLib/SbsaQemuLib.c b/Silicon/Qemu/Library/SbsaQemuLib/SbsaQemuLib.c new file mode 100644 index 0000000000..269dd44028 --- /dev/null +++ b/Silicon/Qemu/Library/SbsaQemuLib/SbsaQemuLib.c @@ -0,0 +1,148 @@ +/** @file +* +* Copyright (c) 2019, Linaro Limited. All rights reserved. +* +* This program and the accompanying materials +* are licensed and made available under the terms and conditions of the BSD License +* which accompanies this distribution. The full text of the license may be found at +* http://opensource.org/licenses/bsd-license.php +* +* THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, +* WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. +* +**/ + +#include <Library/ArmLib.h> +#include <Library/ArmPlatformLib.h> + +#include <Ppi/ArmMpCoreInfo.h> + + +ARM_CORE_INFO mArmPlatformNullMpCoreInfoTable[] = { + { + // Cluster 0, Core 0 + 0x0, 0x0, + + // MP Core MailBox Set/Get/Clear Addresses and Clear Value + (EFI_PHYSICAL_ADDRESS)0, + (EFI_PHYSICAL_ADDRESS)0, + (EFI_PHYSICAL_ADDRESS)0, + (UINT64)0xFFFFFFFF + }, + { + // Cluster 0, Core 1 + 0x0, 0x1, + + // MP Core MailBox Set/Get/Clear Addresses and Clear Value + (EFI_PHYSICAL_ADDRESS)0, + (EFI_PHYSICAL_ADDRESS)0, + (EFI_PHYSICAL_ADDRESS)0, + (UINT64)0xFFFFFFFF + }, + { + // Cluster 0, Core 2 + 0x0, 0x2, + + // MP Core MailBox Set/Get/Clear Addresses and Clear Value + (EFI_PHYSICAL_ADDRESS)0, + (EFI_PHYSICAL_ADDRESS)0, + (EFI_PHYSICAL_ADDRESS)0, + (UINT64)0xFFFFFFFF + }, + { + // Cluster 0, Core 3 + 0x0, 0x3, + + // MP Core MailBox Set/Get/Clear Addresses and Clear Value + (EFI_PHYSICAL_ADDRESS)0, + (EFI_PHYSICAL_ADDRESS)0, + (EFI_PHYSICAL_ADDRESS)0, + (UINT64)0xFFFFFFFF + } +}; + +// This function should be better located into TimerLib implementation +RETURN_STATUS +EFIAPI +TimerConstructor ( + VOID + ) +{ + return EFI_SUCCESS; +} + +/** + Return the current Boot Mode + + This function returns the boot reason on the platform + +**/ +EFI_BOOT_MODE +ArmPlatformGetBootMode ( + VOID + ) +{ + return BOOT_WITH_FULL_CONFIGURATION; +} + +/** + Initialize controllers that must setup in the normal world + + This function is called by the ArmPlatformPkg/PrePi or ArmPlatformPkg/PlatformPei + in the PEI phase. + +**/ +RETURN_STATUS +ArmPlatformInitialize ( + IN UINTN MpId + ) +{ + if (!ArmPlatformIsPrimaryCore (MpId)) { + return RETURN_SUCCESS; + } + + //TODO: Implement me + + return RETURN_SUCCESS; +} + +EFI_STATUS +PrePeiCoreGetMpCoreInfo ( + OUT UINTN *CoreCount, + OUT ARM_CORE_INFO **ArmCoreTable + ) +{ + if (ArmIsMpCore()) { + *CoreCount = sizeof(mArmPlatformNullMpCoreInfoTable) / sizeof(ARM_CORE_INFO); + *ArmCoreTable = mArmPlatformNullMpCoreInfoTable; + return EFI_SUCCESS; + } else { + return EFI_UNSUPPORTED; + } +} + +ARM_MP_CORE_INFO_PPI mMpCoreInfoPpi = { PrePeiCoreGetMpCoreInfo }; + +EFI_PEI_PPI_DESCRIPTOR gPlatformPpiTable[] = { + { + EFI_PEI_PPI_DESCRIPTOR_PPI, + &gArmMpCoreInfoPpiGuid, + &mMpCoreInfoPpi + } +}; + +VOID +ArmPlatformGetPlatformPpiList ( + OUT UINTN *PpiListSize, + OUT EFI_PEI_PPI_DESCRIPTOR **PpiList + ) +{ + if (ArmIsMpCore()) { + *PpiListSize = sizeof(gPlatformPpiTable); + *PpiList = gPlatformPpiTable; + } else { + *PpiListSize = 0; + *PpiList = NULL; + } +} + diff --git a/Silicon/Qemu/Library/SbsaQemuLib/SbsaQemuMem.c b/Silicon/Qemu/Library/SbsaQemuLib/SbsaQemuMem.c new file mode 100644 index 0000000000..1cac74dc74 --- /dev/null +++ b/Silicon/Qemu/Library/SbsaQemuLib/SbsaQemuMem.c @@ -0,0 +1,109 @@ +/** @file + + Copyright (c) 2019, Linaro Limited. All rights reserved. + + This program and the accompanying materials are licensed and made available + under the terms and conditions of the BSD License which accompanies this + distribution. The full text of the license may be found at + http://opensource.org/licenses/bsd-license.php + + THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, + WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. + +**/ + +#include <Base.h> +#include <Library/ArmLib.h> +#include <Library/BaseMemoryLib.h> +#include <Library/DebugLib.h> +#include <Library/PcdLib.h> +#include <Library/MemoryAllocationLib.h> + +// Number of Virtual Memory Map Descriptors +#define MAX_VIRTUAL_MEMORY_MAP_DESCRIPTORS 4 + +/** + Return the Virtual Memory Map of your platform + + This Virtual Memory Map is used by MemoryInitPei Module to initialize the MMU + on your platform. + + @param[out] VirtualMemoryMap Array of ARM_MEMORY_REGION_DESCRIPTOR + describing a Physical-to-Virtual Memory + mapping. This array must be ended by a + zero-filled entry. The allocated memory + will not be freed. + +**/ +VOID +ArmPlatformGetVirtualMemoryMap ( + OUT ARM_MEMORY_REGION_DESCRIPTOR **VirtualMemoryMap + ) +{ + ARM_MEMORY_REGION_DESCRIPTOR *VirtualMemoryTable; + //RETURN_STATUS PcdStatus; + + // + // RAD following need to be fetch from ATF + // + //ASSERT (FixedPcdGet64 (PcdSystemMemoryBase) == NewBase); + //PcdStatus = PcdSet64S (PcdSystemMemorySize, NewSize); + //ASSERT_RETURN_ERROR (PcdStatus); + + // + // We need to make sure that the machine we are running on has at least + // 128 MB of memory configured, and is currently executing this binary from + // NOR flash. This prevents a device tree image in DRAM from getting + // clobbered when our caller installs permanent PEI RAM, before we have a + // chance of marking its location as reserved or copy it to a freshly + // allocated block in the permanent PEI RAM in the platform PEIM. + // + + //ASSERT (NewSize >= SIZE_128MB); + //ASSERT ( + // (((UINT64)PcdGet64 (PcdFdBaseAddress) + + // (UINT64)PcdGet32 (PcdFdSize)) <= NewBase) || + // ((UINT64)PcdGet64 (PcdFdBaseAddress) >= (NewBase + NewSize))); + + ASSERT (VirtualMemoryMap != NULL); + + VirtualMemoryTable = AllocatePool (sizeof (ARM_MEMORY_REGION_DESCRIPTOR) * + MAX_VIRTUAL_MEMORY_MAP_DESCRIPTORS); + + if (VirtualMemoryTable == NULL) { + DEBUG ((DEBUG_ERROR, "%a: Error: Failed AllocatePool()\n", __FUNCTION__)); + return; + } + + // System DRAM + VirtualMemoryTable[0].PhysicalBase = PcdGet64 (PcdSystemMemoryBase); + VirtualMemoryTable[0].VirtualBase = VirtualMemoryTable[0].PhysicalBase; + VirtualMemoryTable[0].Length = PcdGet64 (PcdSystemMemorySize); + VirtualMemoryTable[0].Attributes = ARM_MEMORY_REGION_ATTRIBUTE_WRITE_BACK; + + DEBUG ((DEBUG_INFO, "%a: Dumping System DRAM Memory Map:\n" + "\tPhysicalBase: 0x%lX\n" + "\tVirtualBase: 0x%lX\n" + "\tLength: 0x%lX\n", + __FUNCTION__, + VirtualMemoryTable[0].PhysicalBase, + VirtualMemoryTable[0].VirtualBase, + VirtualMemoryTable[0].Length)); + + // Peripheral space before DRAM + VirtualMemoryTable[1].PhysicalBase = 0x0; + VirtualMemoryTable[1].VirtualBase = 0x0; + VirtualMemoryTable[1].Length = VirtualMemoryTable[0].PhysicalBase; + VirtualMemoryTable[1].Attributes = ARM_MEMORY_REGION_ATTRIBUTE_DEVICE; + + // Remap the FD region as normal executable memory + VirtualMemoryTable[2].PhysicalBase = PcdGet64 (PcdFdBaseAddress); + VirtualMemoryTable[2].VirtualBase = VirtualMemoryTable[2].PhysicalBase; + VirtualMemoryTable[2].Length = FixedPcdGet32 (PcdFdSize); + VirtualMemoryTable[2].Attributes = ARM_MEMORY_REGION_ATTRIBUTE_WRITE_BACK; + + // End of Table + ZeroMem (&VirtualMemoryTable[3], sizeof (ARM_MEMORY_REGION_DESCRIPTOR)); + + *VirtualMemoryMap = VirtualMemoryTable; +} diff --git a/Silicon/Qemu/Library/SbsaQemuNorFlashLib/SbsaQemuNorFlashLib.c b/Silicon/Qemu/Library/SbsaQemuNorFlashLib/SbsaQemuNorFlashLib.c new file mode 100644 index 0000000000..d3613f30bd --- /dev/null +++ b/Silicon/Qemu/Library/SbsaQemuNorFlashLib/SbsaQemuNorFlashLib.c @@ -0,0 +1,46 @@ +/** @file + + Copyright (c) 2019, Linaro Ltd. All rights reserved + + This program and the accompanying materials + are licensed and made available under the terms and conditions of the BSD License + which accompanies this distribution. The full text of the license may be found at + http://opensource.org/licenses/bsd-license.php + + THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, + WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. + + **/ + +#include <Base.h> +#include <PiDxe.h> +#include <Library/NorFlashPlatformLib.h> + +#define QEMU_NOR_BLOCK_SIZE SIZE_256KB + +EFI_STATUS +NorFlashPlatformInitialization ( + VOID + ) +{ + return EFI_SUCCESS; +} + +NOR_FLASH_DESCRIPTION mNorFlashDevice = +{ + FixedPcdGet64(PcdFdBaseAddress), + FixedPcdGet64(PcdFdBaseAddress), + FixedPcdGet32(PcdFdSize), + QEMU_NOR_BLOCK_SIZE +}; + +EFI_STATUS +NorFlashPlatformGetDevices ( + OUT NOR_FLASH_DESCRIPTION **NorFlashDescriptions, + OUT UINT32 *Count + ) +{ + *NorFlashDescriptions = &mNorFlashDevice; + *Count = 1; + return EFI_SUCCESS; +} diff --git a/Silicon/Qemu/Library/SbsaQemuPciHostBridgeLib/SbsaQemuPciHostBridgeLib.c b/Silicon/Qemu/Library/SbsaQemuPciHostBridgeLib/SbsaQemuPciHostBridgeLib.c new file mode 100644 index 0000000000..29830b9f6b --- /dev/null +++ b/Silicon/Qemu/Library/SbsaQemuPciHostBridgeLib/SbsaQemuPciHostBridgeLib.c @@ -0,0 +1,224 @@ +/** @file + PCI Host Bridge Library instance for pci-ecam-generic DT nodes + + Copyright (c) 2019, Linaro Ltd. All rights reserved + + This program and the accompanying materials are licensed and made available + under the terms and conditions of the BSD License which accompanies this + distribution. The full text of the license may be found at + http://opensource.org/licenses/bsd-license.php. + + THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, + WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR + IMPLIED. + +**/ +#include <PiDxe.h> +#include <Library/PciHostBridgeLib.h> +#include <Library/DebugLib.h> +#include <Library/DevicePathLib.h> +#include <Library/MemoryAllocationLib.h> +#include <Library/UefiBootServicesTableLib.h> + +#include <Protocol/PciRootBridgeIo.h> +#include <Protocol/PciHostBridgeResourceAllocation.h> + +#pragma pack(1) +typedef struct { + ACPI_HID_DEVICE_PATH AcpiDevicePath; + EFI_DEVICE_PATH_PROTOCOL EndDevicePath; +} EFI_PCI_ROOT_BRIDGE_DEVICE_PATH; +#pragma pack () + +STATIC EFI_PCI_ROOT_BRIDGE_DEVICE_PATH mEfiPciRootBridgeDevicePath = { + { + { + ACPI_DEVICE_PATH, + ACPI_DP, + { + (UINT8) (sizeof(ACPI_HID_DEVICE_PATH)), + (UINT8) ((sizeof(ACPI_HID_DEVICE_PATH)) >> 8) + } + }, + EISA_PNP_ID(0x0A03), + 0 + }, + + { + END_DEVICE_PATH_TYPE, + END_ENTIRE_DEVICE_PATH_SUBTYPE, + { + END_DEVICE_PATH_LENGTH, + 0 + } + } +}; + +GLOBAL_REMOVE_IF_UNREFERENCED +CHAR16 *mPciHostBridgeLibAcpiAddressSpaceTypeStr[] = { + L"Mem", L"I/O", L"Bus" +}; + +STATIC PCI_ROOT_BRIDGE mRootBridge = { + /** UINT32 Segment; Segment number */ + 0, + + /** UINT64 Supports; Supported attributes */ + EFI_PCI_ATTRIBUTE_ISA_IO_16 | EFI_PCI_ATTRIBUTE_ISA_MOTHERBOARD_IO | + EFI_PCI_ATTRIBUTE_VGA_IO_16 | EFI_PCI_ATTRIBUTE_VGA_PALETTE_IO_16, + + /** UINT64 Attributes; Initial attributes */ + EFI_PCI_ATTRIBUTE_ISA_IO_16 | EFI_PCI_ATTRIBUTE_ISA_MOTHERBOARD_IO | + EFI_PCI_ATTRIBUTE_VGA_IO_16 | EFI_PCI_ATTRIBUTE_VGA_PALETTE_IO_16, + + /** BOOLEAN DmaAbove4G; DMA above 4GB memory */ + TRUE, + + /** BOOLEAN NoExtendedConfigSpace; When FALSE, the root bridge supports + Extended (4096-byte) Configuration Space. When TRUE, the root bridge + supports 256-byte Configuration Space only. */ + FALSE, + + /** BOOLEAN ResourceAssigned; Resource assignment status of the root bridge. + Set to TRUE if Bus/IO/MMIO resources for root bridge have been assigned */ + FALSE, + + /** UINT64 AllocationAttributes; Allocation attributes. */ + EFI_PCI_HOST_BRIDGE_COMBINE_MEM_PMEM | + EFI_PCI_HOST_BRIDGE_MEM64_DECODE, /* as Mmio64Size > 0 */ + + { + /** PCI_ROOT_BRIDGE_APERTURE Bus; Bus aperture which can be used by the + * root bridge. */ + FixedPcdGet32 (PcdPciBusMin), + FixedPcdGet32 (PcdPciBusMax) + }, + + /** PCI_ROOT_BRIDGE_APERTURE Io; IO aperture which can be used by the root + bridge */ + { + FixedPcdGet64 (PcdPciIoBase), + FixedPcdGet64 (PcdPciIoBase) + FixedPcdGet64 (PcdPciIoSize) - 1 + }, + + /** PCI_ROOT_BRIDGE_APERTURE Mem; MMIO aperture below 4GB which can be used by + the root bridge + (gArmTokenSpaceGuid.PcdPciMmio32Translation as 0x0) */ + { + FixedPcdGet32 (PcdPciMmio32Base), + FixedPcdGet32 (PcdPciMmio32Base) + FixedPcdGet32 (PcdPciMmio32Size) - 1, + }, + + /** PCI_ROOT_BRIDGE_APERTURE MemAbove4G; MMIO aperture above 4GB which can be + used by the root bridge. + (gArmTokenSpaceGuid.PcdPciMmio64Translation as 0x0) */ + { + FixedPcdGet64 (PcdPciMmio64Base), + FixedPcdGet64 (PcdPciMmio64Base) + FixedPcdGet64 (PcdPciMmio64Size) - 1 + }, + + /** PCI_ROOT_BRIDGE_APERTURE PMem; Prefetchable MMIO aperture below 4GB which + can be used by the root bridge. + In our case, mo separate ranges for prefetchable and non-prefetchable BARs */ + { MAX_UINT64, 0 }, + + /** PCI_ROOT_BRIDGE_APERTURE PMemAbove4G; Prefetchable MMIO aperture above 4GB + which can be used by the root bridge. */ + { MAX_UINT64, 0 }, + /** EFI_DEVICE_PATH_PROTOCOL *DevicePath; Device path. */ + (EFI_DEVICE_PATH_PROTOCOL *)&mEfiPciRootBridgeDevicePath, +}; + +/** + Return all the root bridge instances in an array. + + @param Count Return the count of root bridge instances. + + @return All the root bridge instances in an array. + The array should be passed into PciHostBridgeFreeRootBridges() + when it's not used. +**/ +PCI_ROOT_BRIDGE * +EFIAPI +PciHostBridgeGetRootBridges ( + UINTN *Count + ) +{ + *Count = 1; + return &mRootBridge; +} + +/** + Free the root bridge instances array returned from + PciHostBridgeGetRootBridges(). + + @param Bridges The root bridge instances array. + @param Count The count of the array. +**/ +VOID +EFIAPI +PciHostBridgeFreeRootBridges ( + PCI_ROOT_BRIDGE *Bridges, + UINTN Count + ) +{ + ASSERT (Count == 1); +} + +/** + Inform the platform that the resource conflict happens. + + @param HostBridgeHandle Handle of the Host Bridge. + @param Configuration Pointer to PCI I/O and PCI memory resource + descriptors. The Configuration contains the resources + for all the root bridges. The resource for each root + bridge is terminated with END descriptor and an + additional END is appended indicating the end of the + entire resources. The resource descriptor field + values follow the description in + EFI_PCI_HOST_BRIDGE_RESOURCE_ALLOCATION_PROTOCOL + .SubmitResources(). +**/ +VOID +EFIAPI +PciHostBridgeResourceConflict ( + EFI_HANDLE HostBridgeHandle, + VOID *Configuration + ) +{ + EFI_ACPI_ADDRESS_SPACE_DESCRIPTOR *Descriptor; + UINTN RootBridgeIndex; + DEBUG ((DEBUG_ERROR, "PciHostBridge: Resource conflict happens!\n")); + + RootBridgeIndex = 0; + Descriptor = (EFI_ACPI_ADDRESS_SPACE_DESCRIPTOR *) Configuration; + while (Descriptor->Desc == ACPI_ADDRESS_SPACE_DESCRIPTOR) { + DEBUG ((DEBUG_ERROR, "RootBridge[%d]:\n", RootBridgeIndex++)); + for (; Descriptor->Desc == ACPI_ADDRESS_SPACE_DESCRIPTOR; Descriptor++) { + ASSERT (Descriptor->ResType < + (sizeof (mPciHostBridgeLibAcpiAddressSpaceTypeStr) / + sizeof (mPciHostBridgeLibAcpiAddressSpaceTypeStr[0]) + ) + ); + DEBUG ((DEBUG_ERROR, " %s: Length/Alignment = 0x%lx / 0x%lx\n", + mPciHostBridgeLibAcpiAddressSpaceTypeStr[Descriptor->ResType], + Descriptor->AddrLen, Descriptor->AddrRangeMax + )); + if (Descriptor->ResType == ACPI_ADDRESS_SPACE_TYPE_MEM) { + DEBUG ((DEBUG_ERROR, " Granularity/SpecificFlag = %ld / %02x%s\n", + Descriptor->AddrSpaceGranularity, Descriptor->SpecificFlag, + ((Descriptor->SpecificFlag & + EFI_ACPI_MEMORY_RESOURCE_SPECIFIC_FLAG_CACHEABLE_PREFETCHABLE + ) != 0) ? L" (Prefetchable)" : L"" + )); + } + } + // + // Skip the END descriptor for root bridge + // + ASSERT (Descriptor->Desc == ACPI_END_TAG_DESCRIPTOR); + Descriptor = (EFI_ACPI_ADDRESS_SPACE_DESCRIPTOR *)( + (EFI_ACPI_END_TAG_DESCRIPTOR *)Descriptor + 1 + ); + } +} diff --git a/Maintainers.txt b/Maintainers.txt index 876ae5612a..03d7278af3 100644 --- a/Maintainers.txt +++ b/Maintainers.txt @@ -151,3 +151,15 @@ M: Liming Gao liming.gao@intel.com

Silicon/Marvell R: Marcin Wojtas mw@semihalf.com + +Silicon/Qemu/ +M: Ard Biesheuvel ard.biesheuvel@linaro.org +M: Leif Lindholm leif.lindholm@linaro.org +R: Radoslaw Biernacki rad@semihalf.com +R: Tanmay Jagdale tanmay.jagdale@linaro.org + +Platform/Qemu/SbsaQemu +M: Ard Biesheuvel ard.biesheuvel@linaro.org +M: Leif Lindholm leif.lindholm@linaro.org +R: Radoslaw Biernacki rad@semihalf.com +R: Tanmay Jagdale tanmay.jagdale@linaro.org diff --git a/Platform/Qemu/SbsaQemu/Readme.md b/Platform/Qemu/SbsaQemu/Readme.md new file mode 100644 index 0000000000..9d9c0e4b67 --- /dev/null +++ b/Platform/Qemu/SbsaQemu/Readme.md @@ -0,0 +1,162 @@ +# Overview + +This directory holds UEFI implementation for Sbsa-ref machine which is faithful as possible to real hardware. In opposition to existing Qemu Virt machine which is suited for performing workloads, the purpose of this machine is development of firmware and OS for AARCH64 server alike platforms (like in situation where real HW is not available yet or the debugging is easier to control under emulation). The SBSAQemu name, was chosen because the modeled HW is aimed to follow way that server-style armv8 machines are recommended to be set up. +Implementation does not use fw-cfg nor DT provided by Qemu. + +# How to build (Linux Environment) + +## Prerequisites + +Build process for sbsa-ref uses fdf file for flash image composition. This is different to what some might expect as you need to first build the ATF before building EDK2. +Flash0 (secure) is used by BL1 and FIP (BL2 + BL31). +Flash1 contains EFI code and EFI variables. +For rest of the build process, typical prerequisites applies. + +## Obtaining source code + +1. Create a new directory on your local development machine for use as your workspace. This example uses `~/workspace`, modify as appropriate for your needs. In the next steps we will use `WORKSPACE` environment variable for reference to this directory. + + ``` + cd ~/ + mkdir workspace + cd workspace + export WORKSPACE=$PWD + ``` + +1. Into that folder, clone: + 1. [qemu](https://github.com/qemu/qemu.git) + 1. [edk2](https://github.com/tianocore/edk2) + 1. [edk2-platforms](https://github.com/tianocore/edk2-platforms) + 1. [atf](https://git.trustedfirmware.org/TF-A/trusted-firmware-a.git) + + ``` + cd $WORKSPACE + git clone https://github.com/qemu/qemu.git + git clone https://github.com/tianocore/edk2 + git clone https://github.com/tianocore/edk2-platforms + git clone https://git.trustedfirmware.org/TF-A/trusted-firmware-a.git + ``` + For Edk2 we need to initialize sub-modules (like OpenSSL) + ``` + cd edk2 + git submodule init + git submodule update + ``` + For development purposes you might also need an [iASL compiler](##Optional step for iASL compiler) + +## Manual building + +1. Parallel make + + The main build process _can_ run in parallel - so figure out how many threads we + have available. + + ``` + $ getconf _NPROCESSORS_ONLN + 8 + ``` + OK, so we have 8 CPUs - let's tell the build to use a little more than that: + ``` + $ export NUM_CPUS=$((`getconf _NPROCESSORS_ONLN` + 2)) + ``` + +1. Compile Qemu + + Sbsa-ref machine is fully SW emulated SBSA machine (ARM64). It aims to emulate the real HW as close as possible. It's purpose it to enable new feature development when HW for those features are not yet present on the market. It allows poking the HW to do all kinds of things (including errors) which are beyond control on real HW. It also allow easy simulations and debugging of FW-to-HW interactions. + + Keep in mind that all of the above is possible as this machine is fully emulated in SW. Sbsa-ref machine does not use any HW acceleration of your platform, even if you run it on ARM64 platform. The EL3 (and ARM TrustZone) is also emulated in SW. + + Sbsa-ref machine was added into Qemu in v4.1.0 + If your distribution package provides version you need to compile Qemu from the source. Below is a short instruction how to compile Qemu without referring to Qemu docs. The `qemu-inst` is the install directory for Qemu in `workspace`. Modify those as appropriate for your needs. + + ``` + cd $WORKSPACE + mkdir qemu-inst + cd qemu + mkdir -p build-native + cd build-native + ../configure --target-list=aarch64-softmmu --prefix=$WORKSPACE/qemu-inst --enable-kvm --enable-fdt --enable-debug --enable-gtk + make -j $NUM_CPUS install + ``` + + Qemu should be installed now in `$WORKSPACE/qemu-int` + +1. Compile ATF + + As noted before, for Sbsa-ref machine we use fdf to compose two flash images. Those flash images need BL1, BL2 and BL31 from ATF in form of two files `bl1.bin` and `fip.bin`. Follow the instructions below to get those artifacts. + + ``` + cd $WORKSPACE/atf + export CROSS_COMPILE=aarch64-linux-gnu- + make PLAT=sbsa all fip + ``` + Than copy `bl1.bin` and `fip.bin` to the top `workspace` directory: + ``` + cp build/sbsa/release/bl1.bin ../ + cp build/sbsa/release/fip.bin ../ + ``` + +1. edk2-platforms - SBSA Qemu UEFI implementation + + Compilation of BaseTools and preparation: + + ``` + cd $WORKSPACE + export PACKAGES_PATH=$WORKSPACE/edk2:$WORKSPACE/edk2-platforms + make -C edk2/BaseTools + export GCC5_AARCH64_PREFIX=aarch64-linux-gnu- + . edk2/edksetup.sh + ``` + + Compilation UEFI for Sbsa Qemu: + + ``` + cd $WORKSPACE + build -n $NUM_CPUS -b RELEASE -a AARCH64 -t GCC5 -p edk2-platforms/Platform/Qemu/SBSAQemu/SBSAQemu.dsc + ``` + Copy SBSA_FLASH0.fd and SBSA_FLASH0.fd to top `workspace` directory. Than extend the file size to match the machine flash size. + ``` + cp Build/SbsaQemu/RELEASE_GCC5/FV/SBSA_FLASH[01].fd . + truncate -s 268435456 SBSA_FLASH[01].fd + ``` + +1. Testing + + The resulting SBSA_FLASH0.fd file will contain secure flash0 image (ATF code). + The SBSA_FLASH1.fd will contain non-secure UEFI code and UEFI variables. + + You should be able to get UEFI console with following qemu command line: + ``` + qemu-inst/bin/qemu-system-aarch64 -m 1024 -cpu cortex-a57 -M sbsa-ref -pflash SBSA_FLASH0.fd -pflash SBSA_FLASH1.fd -serial stdio + ``` + You can add XHCI controller with keyboard and mouse by: + ``` + -device qemu-xhci -device usb-mouse -device usb-kbd + ``` + You can add the hard drive to platform AHCI controller by `hda` parameter: + ``` + -hda disk1.img + ``` + For TEE and other secure development you might get use of secure serial which would require following commands. First create `secure_serial` fifo and read it from separate terminal (open new terminal emulator window for it): + ``` + mkfifo secure_serial + tail -f secure_serial + ``` + Than on first console: + ``` + qemu-inst/bin/qemu-system-aarch64 -m 1024 -cpu cortex-a57 -M sbsa-ref -pflash SBSA_FLASH0.fd -pflash SBSA_FLASH1.fd -serial stdio -hda disk1.img -serial file:secure_serial + ``` + +## Optional step for iASL compiler (needed only in case of usage of DynamicTables) + + For ACPI developed purposes we might need the latest version of iASL compiler. In that case follow this short instruction: + ``` + cd $WORKSPACE + git clone https://github.com/acpica/acpica.git + cd acpica + HOST=_LINUX make + ``` + (output bin in generate/unix/bin/) + ``` + export PATH=$WORKSPACE/acpica/generate/unix/bin/:$PATH + ``` diff --git a/Readme.md b/Readme.md index 1befd0b544..77971721f8 100644 --- a/Readme.md +++ b/Readme.md @@ -246,6 +246,9 @@ For more information, see the ## Socionext * [SynQuacer](Platform/Socionext/DeveloperBox)

+## Qemu +* [SBSA](Platform/Qemu/SbsaQemu) + # Maintainers

See [Maintainers.txt](Maintainers.txt). diff --git a/Silicon/Qemu/Library/SbsaQemuLib/SbsaQemuHelper.S b/Silicon/Qemu/Library/SbsaQemuLib/SbsaQemuHelper.S new file mode 100644 index 0000000000..2664baa75b --- /dev/null +++ b/Silicon/Qemu/Library/SbsaQemuLib/SbsaQemuHelper.S @@ -0,0 +1,62 @@ +# +# Copyright (c) 2019, Linaro Limited. All rights reserved. +# +# This program and the accompanying materials +# are licensed and made available under the terms and conditions of the BSD License +# which accompanies this distribution. The full text of the license may be found at +# http://opensource.org/licenses/bsd-license.php +# +# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, +# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. +# +# + +#include <AsmMacroIoLibV8.h> +#include <Library/ArmLib.h> + +ASM_FUNC(ArmPlatformPeiBootAction) + ret + +//UINTN +//ArmPlatformGetCorePosition ( +// IN UINTN MpId +// ); +// With this function: CorePos = (ClusterId * 4) + CoreId +ASM_FUNC(ArmPlatformGetCorePosition) + and x1, x0, #ARM_CORE_MASK + and x0, x0, #ARM_CLUSTER_MASK + add x0, x1, x0, LSR #6 + ret + +//UINTN +//ArmPlatformGetPrimaryCoreMpId ( +// VOID +// ); +ASM_FUNC(ArmPlatformGetPrimaryCoreMpId) + MOV32 (w0, FixedPcdGet32 (PcdArmPrimaryCore)) + ret + +//UINTN +//ArmPlatformIsPrimaryCore ( +// IN UINTN MpId +// ); +ASM_FUNC(ArmPlatformIsPrimaryCore) + MOV32 (w1, FixedPcdGet32 (PcdArmPrimaryCoreMask)) + and x0, x0, x1 + MOV32 (w1, FixedPcdGet32 (PcdArmPrimaryCore)) + cmp w0, w1 + mov x0, #1 + mov x1, #0 + csel x0, x0, x1, eq + ret + +// +// Bits 0..2 of the AA64MFR0_EL1 system register encode the size of the +// physical address space support on this CPU: +// 0 == 32 bits, 1 == 36 bits, etc etc +// 6 and 7 are reserved +// +.LPARanges: + .byte 32, 36, 40, 42, 44, 48, -1, -1 + +ASM_FUNCTION_REMOVE_IF_UNREFERENCED