I'm confused now. AIUI (and linaro-gateway:/etc/dnsmasq.conf backs me
up on this) the naming scheme is as follows:
calxeda{chassis_number}-{node_number}-{interface_number}
where {interface_number} is:
0 -- eth0 in the node
1 -- eth1 in the node
2 -- ecme for the node
...
Oh! There are entries for calxeda01-00-03 and calxeda01-00-03 in
/etc/hosts. Who did that?
Cheers,
mwh
> _______________________________________________
> I get the following when checking for IPs (Matt Gretton-Dann was at my
> desk asking about Calxeda02 just now :-) ):
> steve-capper@linaro-gateway:~$ cxmanage ipinfo calxeda02-00-03
> Getting IP addresses...
> 1 successes | 0 errors | 0 nodes left | .
>
> IP info from calxeda02-00-03
> Node 0: 192.168.2.75
> Node 1: 192.168.2.78
> Node 2: 192.168.2.81
> Node 3: 192.168.2.84
>
> i.e. only one card active?
>
> So I think it is a good idea to power cycle.
>
> Cheers,
> --
> Steve
>
> On 20 August 2013 10:13, Matt Hart <matthew.hart@linaro.org> wrote:
>> Hi all,
>>
>> For reasons I'm yet to establish, the management node of calxeda02 has
>> become unresponsive and unreachable on our network.
>>
>> linaro-gateway:~$ cxmanage macaddrs calxeda02-00-02
>> Getting MAC addresses...
>> 0 successes | 1 errors | 0 nodes left | .
>>
>> Command failed on these hosts
>> calxeda02-00-02 : [Errno -2] Name or service not known
>>
>> I've checked the obvious things like cables etc, but our DHCP logs show 3
>> nodes making requests within the last couple of days and they all use the
>> same link cable so it doesn't seem a physical networking issue.
>>
>> If nobody has any reservations or comments, I'd like to power cycle the box
>> as a first step.
>>
>> Matt
>>
>>
>
> linaro-validation mailing list
> linaro-validation@lists.linaro.org
> http://lists.linaro.org/mailman/listinfo/linaro-validation