Hi Dave,

            Is there any way to solve this without using PDU, like increasing the delay of for manual plugging and unplugging of power supply to board. If PDU is compulsory then which type of PDU can used because if we google for PDU different types of PDU's are there. for LAVA which of PDU can be used?

On Mon, Mar 2, 2015 at 3:02 PM, Narendra Kumar <narendrakumar.chepuri@gmail.com> wrote:

Hi Dave,

              I have only one telnet connection to board, where I configured to port 4000 using "telnet localhost 4000" command in my PC I am able to connect to board. The issue might be the restart command in panda01.conf "/usr/bin/pduclient --daemon localhost --hostname pdu --command reboot --port 05" where PDU port-05 is not configured to telnet port 4000, if this is the issue may I know how to configure PDU port to required telnet port.

On Fri, Feb 27, 2015 at 7:50 PM, Dave Pigott <dave.pigott@linaro.org> wrote:

Hi Narendra,

That looks like you have another telnet connection to the board, or you haven't set up your serial console correctly.

Dave

Sent from my Aldis Lamp

On 27 Feb 2015, at 06:46, Narendra Kumar <narendrakumar.chepuri@gmail.com> wrote:

Hi Senthil,


I am getting some error while deploying image in panda. I am sharing log can you tell me what could be the issue.

ErrorMessage: Trying 127.0.0.1... Connected to localhost. Escape character is '^]'. ser2net port 4000 device /dev/ttyS0 [115200 N81] (Debian GNU/Linux) Connection closed by foreign host. CriticalError: Trying 127.0.0.1... Connected to localhost. Escape character is '^]'. ser2net port 4000 device /dev/ttyS0 [115200 N81] (Debian GNU/Linux) Connection closed by foreign host.

On Thu, Feb 26, 2015 at 7:10 PM, Senthil Kumaran <senthil.kumaran@linaro.org> wrote:

Hi Narendra,

On Thursday 26 February 2015 06:48 PM, Narendra Kumar wrote:

we need to only master images for testing? Using of  images located at
"https://releases.linaro.org/" is allowed?

Master image helps to leave the board in a useable state after each job run in LAVA. You can read about master images here - https://validation.linaro.org/static/docs/lava-image-creation.html?highlight=master%20image and here - https://git.linaro.org/lava/lava-master-image-scripts.git/blob_plain/HEAD:/README

Test images are the images that you specify within the job JSON, on which you want your tests to get executed. These could be images from https://releases.linaro.org or elsewhere. These images will have the partition layout already setup by master images for deploying these images in device under test (DUT) that is connected with LAVA.

Thank You.
--
Senthil Kumaran
http://www.stylesen.org/
http://www.sasenthilkumaran.com/

--

<image002.png>Please consider the environment before printing this e-mail

Thanks & Regards

Narendra Kumar Chepuri

(+917353049544)

<job_56.log>

<panda01.conf>

<panda-basic-usb-test.json>

_______________________________________________
linaro-validation mailing list
linaro-validation@lists.linaro.org
http://lists.linaro.org/mailman/listinfo/linaro-validation

--

Please consider the environment before printing this e-mail

Thanks & Regards

Narendra Kumar Chepuri

(+917353049544)

--

Please consider the environment before printing this e-mail

Thanks & Regards

Narendra Kumar Chepuri

(+917353049544)