���
AJAX progress indicator
Guest
You are here:

    Job information

    Submitted by:
    pdsw-power
    Requested type:
    vexpress-tc2
    Description:
    big.LITTLE-android-vexpress-tc2
    Status:
    Incomplete
    Priority:
    Medium
    On device:
    pdswlava-vetc2-05
    Submitted at:
    April 29, 2013, 5:01 p.m.
    Started at:
    April 29, 2013, 5:01 p.m.
    Finished at:
    April 29, 2013, 5:48 p.m.

    Views

    Dispatcher log file - 232

    Download as text file 
    <LAVA_DISPATCHER>2013-04-29 05:01:56 PM INFO: Attempting to connect to device

    Trying 10.1.82.21...
Connected to pdtl-tt1.cambridge.arm.com.
Escape character is '^]'.

    <LAVA_DISPATCHER>2013-04-29 05:02:06 PM INFO: Matched <class 'pexpect.TIMEOUT'> which means all-good
<LAVA_DISPATCHER>2013-04-29 05:02:06 PM INFO: [ACTION-B] deploy_linaro_image is started with {u'hwpack': u'http://pdsw-ci/downloads/releases/latest/ubuntu/release-candidate/hwpack_linaro-vexpress_undertest_armhf_supported.tar.gz', u'rootfs': u'http://pdsw-ci/downloads/releases/latest/ubuntu/release-candidate/linaro-quantal-nano-undertest.tar.gz'}
<LAVA_DISPATCHER>2013-04-29 05:02:06 PM INFO: Booting the system master image
<LAVA_DISPATCHER>2013-04-29 05:02:06 PM INFO: Perform soft reboot the system
    skip 437 lines to next log entry ���
    ^C
linaro-test [rc=130]# reboot
linaro-test [rc=0]# 
Broadcast message from root@pdswlava-vetc2-05
	(/dev/ttyAMA0) at 17:02 ...

The system is going down for reboot NOW!
 * Asking all remaining processes to terminate...        [ OK ]
 * All processes ended within 1 seconds....        [ OK ]
 * Deactivating swap...        [ OK ]
umount: /run/lock: not mounted
umount: /run/shm: not mounted
 * Will now restart
[45545.507833] Restarting system.
Rebooting...
Disabling debug USB.
Switching off ATX PSU.
Board powered down, rebooting...

ARM V2M Firmware v3.1.1
Build Date: Aug 20 2012

Date: Mon 29 Apr 2013
Time:     17:02:21    

Powering up system...
Daughterboard fitted to site 1.

Switching on ATXPSU...
ATX3V3: ON
VIOset: 1.8V
MBtemp: 33 degC

Configuring motherboard (rev D, var A)...
IOFPGA  config: PASSED
MUXFPGA config: PASSED
OSC CLK config: PASSED

Testing SMC devices (FPGA build 255)...
SRAM 32MB test: PASSED
VRAM  8MB test: PASSED
LAN9118   test: PASSED
USB & OTG test: PASSED
KMI1/KMI2 test: PASSED
MMC & SD  test: PASSED
DVI image test: PASSED
AACI AC97 test: PASSED
CF card   test: PASSED
UART port test: PASSED
MAC addrs test: PASSED

Reading Site 1 Board File \SITE1\HBI0249A\board.txt
DB1 JTAG configuration complete.
Setting DB1 OSCCLKS...
DB1.0 DCC 0 SPI configuration complete.

Writing SCC 0x40610007 with 0xFF00FF00
Writing SCC 0x40610046 with 0x01CD1011
Writing SCC 0x406101C0 with 0x0032F003
Writing SCC 0x40610048 with 0x022F1010
Writing SCC 0x40610049 with 0x0011710D
Writing SCC 0x4061004A with 0x022F1010
Writing SCC 0x4061004B with 0x0011710D
Writing SCC 0x4061004C with 0x022F1010
Writing SCC 0x4061004D with 0x0011710D
Writing SCC 0x4061004E with 0x022F1010
Writing SCC 0x4061004F with 0x0011710D
Writing SCC 0x40610300 with 0x00000005
Writing SCC 0x40610301 with 0x060E0356
Writing SCC 0x40610302 with 0x00000000
Writing SCC 0x40610303 with 0x00000000
Writing SCC 0x40610304 with 0x384061A8
Writing SCC 0x40610305 with 0x38407530
Writing SCC 0x40610306 with 0x384088B8
Writing SCC 0x40610307 with 0x38409C40
Writing SCC 0x40610308 with 0x3840AFC8
Writing SCC 0x40610309 with 0x3840C350
Writing SCC 0x4061030A with 0x3CF0D6D8
Writing SCC 0x4061030B with 0x41A0EA60
Writing SCC 0x4061030C with 0x3840445C
Writing SCC 0x4061030D with 0x38404E20
Writing SCC 0x4061030E with 0x384061A8
Writing SCC 0x4061030F with 0x38407530
Writing SCC 0x40610310 with 0x384088B8
Writing SCC 0x40610311 with 0x38409C40
Writing SCC 0x40610312 with 0x3CF0AFC8
Writing SCC 0x40610313 with 0x41A0C350
DB1.0 DCC 0 SCC configuration complete.

DB SMB clock enabled.
Waiting for SITE1 CB_READY...Waiting for SITE1 CB_READY...Waiting for SITE1 CB_READY...Waiting for SITE1 CB_READY...Waiting for SITE1 CB_READY...Waiting for SITE1 CB_READY...Waiting for SITE1 CB_READY...Waiting for SITE1 CB_READY...Waiting for SITE1 CB_READY...Waiting for SITE1 CB_READY...Waiting for SITE1 CB_READY...Waiting for SITE1 CB_READY...Waiting for SITE1 CB_READY...Waiting for SITE1 CB_READY...Waiting for SITE1 CB_READY...Waiting for SITE1 CB_READY...Waiting for SITE1 CB_READY...Waiting for SITE1 CB_READY...Waiting for SITE1 CB_READY...Waiting for SITE1 CB_READY...Waiting for SITE1 CB_READY...Waiting for SITE1 CB_READY...Waiting for SITE1 CB_READY...Waiting for SITE1 CB_READY...
Testing SMB clock...
Configuring MUXFPGA for MB.
Setting DVI mode for VGA.
Releasing Daughterboard resets.
Switching MCC log to UART1.

ARM Versatile Express Boot Monitor
Version:    V5.1.9
Build Date: Dec  3 2012
Daughterboard Site 1: V2P-CA15_A7 Cortex A15
Daughterboard Site 2: Not Used
Running boot script from flash - BOOTSCRIPT
UEFI firmware (version  built at 16:38:55 on Dec  3 2012)
add-symbol-file /linaro/lt/uefi/uefi-next.git/edk2/Build/ArmVExpress-CTA15-A7/DEBUG_ARMLINUXGCC/ARM/ArmPlatformPkg/PrePi/PeiMPCore/DEBUG/ArmPlatformPrePiMPCore.dll 0x81000180
Info: 2GB Test Chip 2 detected.
add-symbol-file /linaro/lt/uefi/uefi-next.git/edk2/Build/ArmVExpress-CTA15-A7/DEBUG_ARMLINUXGCC/ARM/MdeModulePkg/Core/Dxe/DxeMain/DEBUG/DxeCore.dll 0xBFAB7240
Loading DxeCore at 0x00BFAB7000 EntryPoint=0x00BFAB7241
add-symbol-file /linaro/lt/uefi/uefi-next.git/edk2/Build/ArmVExpress-CTA15-A7/DEBUG_ARMLINUXGCC/ARM/MdeModulePkg/Core/Dxe/DxeMain/DEBUG/DxeCore.dll 0xBFAB7000
HOBLIST address in DXE = 0xBF8C9010
Memory Allocation 0x00000004 0xBFFEB000 - 0xBFFEBFFF
Memory Allocation 0x00000004 0xBFFE3000 - 0xBFFEAFFF
Memory Allocation 0x00000004 0xBFFE2000 - 0xBFFE2FFF
Memory Allocation 0x00000004 0xBFFE1000 - 0xBFFE1FFF
Memory Allocation 0x00000004 0xBFFE0000 - 0xBFFE0FFF
Memory Allocation 0x00000004 0xBFFDF000 - 0xBFFDFFFF
Memory Allocation 0x00000004 0xBFFEC000 - 0xC0003FFF
Memory Allocation 0x00000004 0xBFFCF000 - 0xBFFDEFFF
Memory Allocation 0x00000004 0xBFD57000 - 0xBFFCEFFF
Memory Allocation 0x00000004 0xBFAE0000 - 0xBFD56FFF
Memory Allocation 0x00000004 0xBFAB7000 - 0xBFADFFFF
Memory Allocation 0x00000003 0xBFAB7000 - 0xBFADFFFF
FV Hob            0x81000000 - 0x810AFFFF
FV Hob            0xBFAE0000 - 0xBFD55FFF
FV2 Hob           0xBFAE0000 - 0xBFD55FFF
add-symbol-file /linaro/lt/uefi/uefi-next.git/edk2/Build/ArmVExpress-CTA15-A7/DEBUG_ARMLINUXGCC/ARM/ArmPkg/Drivers/CpuDxe/CpuDxe/DEBUG/ArmCpuDxe.dll 0xBFA5D240
Loading driver at 0x000BFA5D000 EntryPoint=0x000BFA5D26D ArmCpuDxe.efi
add-symbol-file /linaro/lt/uefi/uefi-next.git/edk2/Build/ArmVExpress-CTA15-A7/DEBUG_ARMLINUXGCC/ARM/MdeModulePkg/Core/RuntimeDxe/RuntimeDxe/DEBUG/RuntimeDxe.dll 0xBFA75240
Loading driver at 0x000BFA75000 EntryPoint=0x000BFA7526D RuntimeDxe.efi
add-symbol-file /linaro/lt/uefi/uefi-next.git/edk2/Build/ArmVExpress-CTA15-A7/DEBUG_ARMLINUXGCC/ARM/MdeModulePkg/Universal/SecurityStubDxe/SecurityStubDxe/DEBUG/SecurityStubDxe.dll 0xBFA51240
Loading driver at 0x000BFA51000 EntryPoint=0x000BFA5126D SecurityStubDxe.efi
add-symbol-file /linaro/lt/uefi/uefi-next.git/edk2/Build/ArmVExpress-CTA15-A7/DEBUG_ARMLINUXGCC/ARM/MdeModulePkg/Universal/FaultTolerantWriteDxe/FaultTolerantWriteDxe/DEBUG/FaultTolerantWriteDxe.dll 0xBFA44240
Loading driver at 0x000BFA44000 EntryPoint=0x000BFA4426D FaultTolerantWriteDxe.efi
add-symbol-file /linaro/lt/uefi/uefi-next.git/edk2/Build/ArmVExpress-CTA15-A7/DEBUG_ARMLINUXGCC/ARM/EmbeddedPkg/ResetRuntimeDxe/ResetRuntimeDxe/DEBUG/Reset.dll 0xBAAA3240
Loading driver at 0x000BAAA3000 EntryPoint=0x000BAAA326D Reset.efi
add-symbol-file /linaro/lt/uefi/uefi-next.git/edk2/Build/ArmVExpress-CTA15-A7/DEBUG_ARMLINUXGCC/ARM/EmbeddedPkg/RealTimeClockRuntimeDxe/RealTimeClockRuntimeDxe/DEBUG/RealTimeClock.dll 0xBAA97240
Loading driver at 0x000BAA97000 EntryPoint=0x000BAA9726D RealTimeClock.efi
add-symbol-file /linaro/lt/uefi/uefi-next.git/edk2/Build/ArmVExpress-CTA15-A7/DEBUG_ARMLINUXGCC/ARM/MdeModulePkg/Universal/HiiDatabaseDxe/HiiDatabaseDxe/DEBUG/HiiDatabase.dll 0xBFA27240
Loading driver at 0x000BFA27000 EntryPoint=0x000BFA2726D HiiDatabase.efi
add-symbol-file /linaro/lt/uefi/uefi-next.git/edk2/Build/ArmVExpress-CTA15-A7/DEBUG_ARMLINUXGCC/ARM/EmbeddedPkg/SerialDxe/SerialDxe/DEBUG/SerialDxe.dll 0xBFA1D240
Loading driver at 0x000BFA1D000 EntryPoint=0x000BFA1D26D SerialDxe.efi
add-symbol-file /linaro/lt/uefi/uefi-next.git/edk2/Build/ArmVExpress-CTA15-A7/DEBUG_ARMLINUXGCC/ARM/ArmPlatformPkg/Drivers/SP805WatchdogDxe/SP805WatchdogDxe/DEBUG/SP805WatchdogDxe.dll 0xBFA11240
Loading driver at 0x000BFA11000 EntryPoint=0x000BFA1126D SP805WatchdogDxe.efi
add-symbol-file /linaro/lt/uefi/uefi-next.git/edk2/Build/ArmVExpress-CTA15-A7/DEBUG_ARMLINUXGCC/ARM/MdeModulePkg/Universal/Acpi/AcpiTableDxe/AcpiTableDxe/DEBUG/AcpiTableDxe.dll 0xBFA00240
Loading driver at 0x000BFA00000 EntryPoint=0x000BFA0026D AcpiTableDxe.efi
add-symbol-file /linaro/lt/uefi/uefi-next.git/edk2/Build/ArmVExpress-CTA15-A7/DEBUG_ARMLINUXGCC/ARM/MdeModulePkg/Universal/DevicePathDxe/DevicePathDxe/DEBUG/DevicePathDxe.dll 0xBF9F0240
Loading driver at 0x000BF9F0000 EntryPoint=0x000BF9F026D DevicePathDxe.efi
add-symbol-file /linaro/lt/uefi/uefi-next.git/edk2/Build/ArmVExpress-CTA15-A7/DEBUG_ARMLINUXGCC/ARM/ArmPlatformPkg/Drivers/NorFlashDxe/NorFlashDxe/DEBUG/ArmVeNorFlashDxe.dll 0xBF9E2240
Loading driver at 0x000BF9E2000 EntryPoint=0x000BF9E226D ArmVeNorFlashDxe.efi
add-symbol-file /linaro/lt/uefi/uefi-next.git/edk2/Build/ArmVExpress-CTA15-A7/DEBUG_ARMLINUXGCC/ARM/MdeModulePkg/Universal/Variable/RuntimeDxe/VariableRuntimeDxe/DEBUG/VariableRuntimeDxe.dll 0xBAA84240
Loading driver at 0x000BAA84000 EntryPoint=0x000BAA8426D VariableRuntimeDxe.efi
Variable driver failed to add EFI_MEMORY_RUNTIME attribute to Flash.
add-symbol-file /linaro/lt/uefi/uefi-next.git/edk2/Build/ArmVExpress-CTA15-A7/DEBUG_ARMLINUXGCC/ARM/EmbeddedPkg/MetronomeDxe/MetronomeDxe/DEBUG/MetronomeDxe.dll 0xBF9D7240
Loading driver at 0x000BF9D7000 EntryPoint=0x000BF9D726D MetronomeDxe.efi
add-symbol-file /linaro/lt/uefi/uefi-next.git/edk2/Build/ArmVExpress-CTA15-A7/DEBUG_ARMLINUXGCC/ARM/ArmPkg/Drivers/PL390Gic/PL390GicDxe/DEBUG/PL390GicDxe.dll 0xBF9CB240
Loading driver at 0x000BF9CB000 EntryPoint=0x000BF9CB26D PL390GicDxe.efi
add-symbol-file /linaro/lt/uefi/uefi-next.git/edk2/Build/ArmVExpress-CTA15-A7/DEBUG_ARMLINUXGCC/ARM/ArmPlatformPkg/Drivers/LcdGraphicsOutputDxe/HdLcdGraphicsOutputDxe/DEBUG/HdLcdGraphicsDxe.dll 0xBF9BC240
Loading driver at 0x000BF9BC000 EntryPoint=0x000BF9BC26D HdLcdGraphicsDxe.efi
add-symbol-file /linaro/lt/uefi/uefi-next.git/edk2/Build/ArmVExpress-CTA15-A7/DEBUG_ARMLINUXGCC/ARM/EmbeddedPkg/Universal/MmcDxe/MmcDxe/DEBUG/MmcDxe.dll 0xBF9AB240
Loading driver at 0x000BF9AB000 EntryPoint=0x000BF9AB26D MmcDxe.efi
add-symbol-file /linaro/lt/uefi/uefi-next.git/edk2/Build/ArmVExpress-CTA15-A7/DEBUG_ARMLINUXGCC/ARM/ArmPlatformPkg/Drivers/PL180MciDxe/PL180MciDxe/DEBUG/PL180MciDxe.dll 0xBF99F240
Loading driver at 0x000BF99F000 EntryPoint=0x000BF99F26D PL180MciDxe.efi
Card is SD2.0 => Supports high capacity
High capacity card.
- PrintOCR Ocr (0xC0FF8000)
	- Card operating voltage: 2.7 to 3.6
	- AccessMode: Block Mode (0x2)
	- PowerUp
- PrintCID
	- Manufacturing date: 6/12
	- Product serial number: 0x29B0E28
	- Product revision: 128
	- OEM ID: DS
- PrintRCA: 0xAAAA0520
	- Status: 0x520
	- RCA: 0xAAAA
- PrintCSD Version 2.00/High Capacity
	- Supported card command class: 0x5B5
	- Speed: 3.0 10Mbit/s
	- Maximum Read Data Block: 512
	- Maximum Write Data Block: 512
	- Format(0): Hard disk-like file system with partition table
add-symbol-file /linaro/lt/uefi/uefi-next.git/edk2/Build/ArmVExpress-CTA15-A7/DEBUG_ARMLINUXGCC/ARM/ArmPlatformPkg/Bds/Bds/DEBUG/ArmPlatformBds.dll 0xBF985240
Loading driver at 0x000BF985000 EntryPoint=0x000BF98526D ArmPlatformBds.efi
add-symbol-file /linaro/lt/uefi/uefi-next.git/edk2/Build/ArmVExpress-CTA15-A7/DEBUG_ARMLINUXGCC/ARM/MdeModulePkg/Universal/CapsuleRuntimeDxe/CapsuleRuntimeDxe/DEBUG/CapsuleRuntimeDxe.dll 0xBAA7C240
Loading driver at 0x000BAA7C000 EntryPoint=0x000BAA7C26D CapsuleRuntimeDxe.efi
add-symbol-file /linaro/lt/uefi/uefi-next.git/edk2/Build/ArmVExpress-CTA15-A7/DEBUG_ARMLINUXGCC/ARM/MdeModulePkg/Universal/MonotonicCounterRuntimeDxe/MonotonicCounterRuntimeDxe/DEBUG/MonotonicCounterRuntimeDxe.dll 0xBAA74240
Loading driver at 0x000BAA74000 EntryPoint=0x000BAA7426D MonotonicCounterRuntimeDxe.efi
add-symbol-file /linaro/lt/uefi/uefi-next.git/edk2/Build/ArmVExpress-CTA15-A7/DEBUG_ARMLINUXGCC/ARM/ArmPkg/Drivers/TimerDxe/TimerDxe/DEBUG/ArmTimerDxe.dll 0xBF97A240
Loading driver at 0x000BF97A000 EntryPoint=0x000BF97A26D ArmTimerDxe.efi
add-symbol-file /linaro/lt/uefi/uefi-next.git/edk2/Build/ArmVExpress-CTA15-A7/DEBUG_ARMLINUXGCC/ARM/MdeModulePkg/Universal/Console/ConPlatformDxe/ConPlatformDxe/DEBUG/ConPlatformDxe.dll 0xBF96D240
Loading driver at 0x000BF96D000 EntryPoint=0x000BF96D26D ConPlatformDxe.efi
add-symbol-file /linaro/lt/uefi/uefi-next.git/edk2/Build/ArmVExpress-CTA15-A7/DEBUG_ARMLINUXGCC/ARM/MdeModulePkg/Universal/Console/ConSplitterDxe/ConSplitterDxe/DEBUG/ConSplitterDxe.dll 0xBF95C240
Loading driver at 0x000BF95C000 EntryPoint=0x000BF95C26D ConSplitterDxe.efi
add-symbol-file /linaro/lt/uefi/uefi-next.git/edk2/Build/ArmVExpress-CTA15-A7/DEBUG_ARMLINUXGCC/ARM/MdeModulePkg/Universal/Console/GraphicsConsoleDxe/GraphicsConsoleDxe/DEBUG/GraphicsConsoleDxe.dll 0xBF948240
Loading driver at 0x000BF948000 EntryPoint=0x000BF94826D GraphicsConsoleDxe.efi
add-symbol-file /linaro/lt/uefi/uefi-next.git/edk2/Build/ArmVExpress-CTA15-A7/DEBUG_ARMLINUXGCC/ARM/MdeModulePkg/Universal/Console/TerminalDxe/TerminalDxe/DEBUG/TerminalDxe.dll 0xBF936240
Loading driver at 0x000BF936000 EntryPoint=0x000BF93626D TerminalDxe.efi
add-symbol-file /linaro/lt/uefi/uefi-next.git/edk2/Build/ArmVExpress-CTA15-A7/DEBUG_ARMLINUXGCC/ARM/MdeModulePkg/Universal/Disk/DiskIoDxe/DiskIoDxe/DEBUG/DiskIoDxe.dll 0xBF92A240
Loading driver at 0x000BF92A000 EntryPoint=0x000BF92A26D DiskIoDxe.efi
add-symbol-file /linaro/lt/uefi/uefi-next.git/edk2/Build/ArmVExpress-CTA15-A7/DEBUG_ARMLINUXGCC/ARM/MdeModulePkg/Universal/Disk/PartitionDxe/PartitionDxe/DEBUG/PartitionDxe.dll 0xBF91A240
Loading driver at 0x000BF91A000 EntryPoint=0x000BF91A26D PartitionDxe.efi
add-symbol-file /home/olimar01/edk2/Build/Fat/RELEASE_RVCTLINUX/ARM/FatPkg/EnhancedFatDxe/Fat/DEBUG/Fat.dll 0xBF916240
Loading driver at 0x000BF916000 EntryPoint=0x000BF9196A1 Fat.efi
add-symbol-file /linaro/lt/uefi/uefi-next.git/edk2/Build/ArmVExpress-CTA15-A7/DEBUG_ARMLINUXGCC/ARM/MdeModulePkg/Universal/Disk/UnicodeCollation/EnglishDxe/EnglishDxe/DEBUG/EnglishDxe.dll 0xBF90E240
Loading driver at 0x000BF90E000 EntryPoint=0x000BF90E26D Engl[=3h[=3h[01;01[=3h[=3h[=3h[=3h[=3h[=3hThe default boot selection will start in  10 seconds  9 seconds  8 seconds  7 seconds  6 seconds  5 seconds  4 seconds  3 seconds  2 seconds  1 seconds
   PEI    487 ms
   DXE   8597 ms
   BDS  16535 ms
Total Time = 25619 ms


Starting the kernel:

[    0.000000] Booting Linux on physical CPU 0x0
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Linux version 3.9.0-rc3 (pdswauto@cz3211bj25) (gcc version 4.7.2 20120910 (prerelease) (crosstool-NG linaro-1.13.1-2012.09-20120921 - Linaro GCC 2012.09) ) #1 SMP Tue Mar 26 13:04:31 GMT 2013
[    0.000000] Kernel was built at commit id ''
[    0.000000] CPU: ARMv7 Processor [412fc0f1] revision 1 (ARMv7), cr=50c5387d
[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[    0.000000] Machine: ARM-Versatile Express, model: V2P-CA15_CA7
[    0.000000] Truncating memory at 0x80000000 to fit in 32-bit physical address space
[    0.000000] Memory policy: ECC disabled, Data cache writealloc
[    0.000000] Zone ranges:
[    0.000000]   Normal   [mem 0x80000000-0xaf7fffff]
[    0.000000]   HighMem  [mem 0xaf800000-0xffffefff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x80000000-0xffffefff]
[    0.000000] PERCPU: Embedded 9 pages/cpu @c167e000 s13632 r8192 d15040 u36864
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 522767
[    0.000000] Kernel command line: console=ttyAMA0,38400n8 root=/dev/mmcblk0p2 rootwait ro
[    0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] __ex_table already sorted, skipping sort
[    0.000000] Memory: 2032MB = 2032MB total
[    0.000000] Memory: 2055256k/2055256k available, 25512k reserved, 1302528K highmem
[    0.000000] Virtual kernel memory layout:
[    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
[    0.000000]     fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)
[    0.000000]     vmalloc : 0xf0000000 - 0xff000000   ( 240 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xef800000   ( 760 MB)
[    0.000000]     pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
[    0.000000]     modules : 0xbf800000 - 0xbfe00000   (   6 MB)
[    0.000000]       .text : 0xc0008000 - 0xc057e99c   (5595 kB)
[    0.000000]       .init : 0xc057f000 - 0xc05c3540   ( 274 kB)
[    0.000000]       .data : 0xc05c4000 - 0xc0604308   ( 257 kB)
[    0.000000]        .bss : 0xc0604308 - 0xc066c8b4   ( 418 kB)
[    0.000000] Hierarchical RCU implementation.
[    0.000000] 	RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=5.
[    0.000000] NR_IRQS:16 nr_irqs:16 16
[    0.000000] Using SP804 '/smb/motherboard/iofpga@3,00000000/timer@110000' as a clock & events source
[    0.000000] Architected local timer running at 24.00MHz (virt).
[    0.000000] Switching to timer-based delay loop
[    0.000000] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 178956ms
[    0.000000] Console: colour dummy device 80x30
[    0.000184] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=240000)
[    0.000198] pid_max: default: 32768 minimum: 301
[    0.000353] Mount-cache hash table entries: 512
[    0.004154] CPU: Testing write buffer coherency: ok
[    0.004182] ftrace: allocating 20060 entries in 40 pages
[    0.025345] CPU0: update cpu_power 1441
[    0.025356] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[    0.025381] Setting up static identity map for 0xc03c4498 - 0xc03c44e4
[    0.027676] vexpress_spc loaded at f0008000
[    0.027686] TC2 power management initialized
[    0.029134] CPU1: Booted secondary processor
[    0.029154] CPU1: update cpu_power 1441
[    0.029159] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[    0.030858] CPU2: Booted secondary processor
[    0.030899] CPU2: update cpu_power 606
[    0.030906] CPU2: thread -1, cpu 0, socket 1, mpidr 80000100
[    0.031961] CPU3: Booted secondary processor
[    0.031980] CPU3: update cpu_power 606
[    0.031986] CPU3: thread -1, cpu 1, socket 1, mpidr 80000101
[    0.032881] CPU4: Booted secondary processor
[    0.032900] CPU4: update cpu_power 606
[    0.032906] CPU4: thread -1, cpu 2, socket 1, mpidr 80000102
[    0.032955] Brought up 5 CPUs
[    0.033010] SMP: Total of 5 processors activated (240.00 BogoMIPS).
[    0.033017] CPU: All CPU(s) started in SVC mode.
[    0.039750] sched: registering cpufreq notifiers for scale-invariant loads
[    0.040215] xor: measuring software checksum speed
[    0.135202]    arm4regs  :  1058.800 MB/sec
[    0.235261]    8regs     :   597.600 MB/sec
[    0.335316]    32regs    :   548.400 MB/sec
[    0.335326] xor: using function: arm4regs (1058.800 MB/sec)
[    0.336195] regulator-dummy: no parameters
[    0.336687] NET: Registered protocol family 16
[    0.337197] DMA: preallocated 256 KiB pool for atomic coherent allocations
[    0.339061] hw perfevents: enabled with CCI PMU driver, 5 counters available
[    0.339100] CCI loaded at f0060000
[    0.351655] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
[    0.351668] hw-breakpoint: maximum watchpoint size is 8 bytes.
[    0.351680] Serial: AMBA PL011 UART driver
[    0.351789] 1c090000.uart: ttyAMA0 at MMIO 0x1c090000 (irq = 37) is a PL011 rev2
[    1.729032] console [ttyAMA0] enabled
[    1.740328] 1c0a0000.uart: ttyAMA1 at MMIO 0x1c0a0000 (irq = 38) is a PL011 rev2
[    1.763338] 1c0b0000.uart: ttyAMA2 at MMIO 0x1c0b0000 (irq = 39) is a PL011 rev2
[    1.785783] 1c0c0000.uart: ttyAMA3 at MMIO 0x1c0c0000 (irq = 40) is a PL011 rev2
[    1.826349] bio: create slab <bio-0> at 0
[    2.006858] raid6: int32x1    133 MB/s
[    2.186923] raid6: int32x2    179 MB/s
[    2.366827] raid6: int32x4    184 MB/s
[    2.546958] raid6: int32x8    183 MB/s
[    2.558179] raid6: using algorithm int32x4 (184 MB/s)
[    2.573303] raid6: using intx1 recovery algorithm
[    2.587913] 3V3: 3300 mV 
[    2.596742] SCSI subsystem initialized
[    2.608661] usbcore: registered new interface driver usbfs
[    2.625264] usbcore: registered new interface driver hub
[    2.641399] usbcore: registered new device driver usb
[    2.657748] Advanced Linux Sound Architecture Driver Initialized.
[    2.677111] Switching to clocksource arch_sys_counter
[    2.724302] NET: Registered protocol family 2
[    2.738012] TCP established hash table entries: 8192 (order: 4, 65536 bytes)
[    2.759314] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[    2.778780] TCP: Hash tables configured (established 8192 bind 8192)
[    2.797922] TCP: reno registered
[    2.807591] UDP hash table entries: 512 (order: 2, 16384 bytes)
[    2.825369] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[    2.844703] NET: Registered protocol family 1
[    2.858069] RPC: Registered named UNIX socket transport module.
[    2.875811] RPC: Registered udp transport module.
[    2.889899] RPC: Registered tcp transport module.
[    2.903985] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    2.923461] Trying to unpack rootfs image as initramfs...
[    3.051883] Freeing initrd memory: 1488K
[    3.063884] hw perfevents: enabled with ARMv7_Cortex_A15 PMU driver, 7 counters available
[    3.088462] hw perfevents: enabled with ARMv7_Cortex_A7 PMU driver, 5 counters available
[    3.115608] bounce pool size: 64 pages
[    3.127159] VFS: Disk quotas dquot_6.5.2
[    3.139058] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    3.159852] NFS: Registering the id_resolver key type
[    3.175036] Key type id_resolver registered
[    3.187563] Key type id_legacy registered
[    3.199595] jffs2: version 2.2. (NAND) (SUMMARY)  ������ 2001-2006 Red Hat, Inc.
[    3.220973] fuse init (API version 7.21)
[    3.233453] Btrfs loaded
[    3.241038] msgmni has been set to 1473
[    3.253484] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[    3.275663] io scheduler noop registered
[    3.287407] io scheduler deadline registered
[    3.300229] io scheduler cfq registered (default)
[    3.321355] hdlcd 2b000000.hdlcd: HDLCD: found ARM HDLCD version r0p0
[    3.340683] hdlcd 2b000000.hdlcd: using 1024x768-16@60 mode
[    3.380863] Console: switching to colour frame buffer device 128x48
[    3.482312] A15 Vcore: 800 <--> 1050 mV at 899 mV 
[    3.512310] A7 Vcore: 800 <--> 1050 mV at 903 mV 
[    3.542318] VIO: at 1803 mV 
[    3.640172] brd: module loaded
[    3.654409] loop: module loaded
[    3.665051] mtdoops: mtd device (mtddev=name/number) must be supplied
[    3.684815] smsc911x: Driver version 2008-10-21
[    3.698563] smsc911x 1a000000.ethernet (unregistered net_device): couldn't get clock -2
[    3.728410] libphy: smsc911x-mdio: probed
[    3.740507] smsc911x 1a000000.ethernet eth0: attached PHY driver [Generic PHY] (mii_bus:phy_addr=1a000000.etherne:01, irq=-1)
[    3.774576] smsc911x 1a000000.ethernet eth0: MAC Address: 00:02:f7:00:48:72
[    3.796080] nxp-isp1760 1b000000.usb: NXP ISP1760 USB Host Controller
[    3.815402] nxp-isp1760 1b000000.usb: new USB bus registered, assigned bus number 1
[    4.038395] nxp-isp1760 1b000000.usb: bus width: 32, oc: digital
[    4.076419] nxp-isp1760 1b000000.usb: irq 48, io mem 0x1b000000
[    4.094164] nxp-isp1760 1b000000.usb: USB ISP 1761 HW rev. 1 started
[    4.113877] hub 1-0:1.0: USB hub found
[    4.125129] hub 1-0:1.0: 1 port detected
[    4.137228] Initializing USB Mass Storage driver...
[    4.152034] usbcore: registered new interface driver usb-storage
[    4.170032] USB Mass Storage support registered.
[    4.184523] mousedev: PS/2 mouse device common for all mice
[    4.202332] rtc-pl031 1c170000.rtc: rtc core: registered pl031 as rtc0
[    4.224694] device-mapper: ioctl: 4.24.0-ioctl (2013-01-15) initialised: dm-devel@redhat.com
[    4.250184] arm_big_little: CPU 0 initialized
[    4.264337] arm_big_little: CPU 2 initialized
[    4.278379] arm_big_little: bL_cpufreq_register: Registered platform driver: vexpress-bL
[    4.302630] cpuidle: using governor ladder
[    4.314898] cpuidle: using governor menu
[    4.326960] mmci-pl18x 1c050000.mmci: mmc0: PL180 manf 41 rev0 at 0x1c050000 irq 41,42 (pio)
[    4.394629] ledtrig-cpu: registered to indicate activity on CPUs
[    4.412656] nxp-isp1760 1b000000.usb: port 1 high speed
[    4.413286] usbcore: registered new interface driver usbhid
[    4.413289] usbhid: USB HID core driver
[    4.456596] ashmem: initialized
[    4.465125] mmc0: new SDHC card at address aaaa
[    4.465604] mmcblk0: mmc0:aaaa SU16G 14.8 GiB 
[    4.493106] logger: created 256K log 'log_main'
[    4.496184]  mmcblk0: p1 p2 p3 p4 < p5 p6 p7 >
[    4.520169] logger: created 256K log 'log_events'
[    4.534289] usb 1-1: new high-speed USB device number 2 using nxp-isp1760
[    4.534537] logger: created 256K log 'log_radio'
[    4.534760] logger: created 256K log 'log_system'
[    4.546878] aaci-pl041 1c040000.aaci: ARM AC'97 Interface PL041 rev0 at 0x1c040000, irq 43
[    4.546884] aaci-pl041 1c040000.aaci: FIFO 512 entries
[    4.547755] oprofile: using timer interrupt.
[    4.635581] TCP: cubic registered
[    4.645502] Initializing XFRM netlink socket
[    4.658401] NET: Registered protocol family 10
[    4.672433] NET: Registered protocol family 17
[    4.685759] NET: Registered protocol family 15
[    4.692330] nxp-isp1760 1b000000.usb: port 1 high speed
[    4.714771] Key type dns_resolver registered
[    4.727626] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 1
[    4.750607] Registering SWP/SWPB emulation handler
[    4.765704] rtc-pl031 1c170000.rtc: setting system clock to 2013-04-29 17:03:15 UTC (1367254995)
[    4.792111] CPUidle for CPU0 registered
[    4.803787] CPUidle for CPU1 registered
[    4.815409] CPUidle for CPU2 registered
[    4.827001] CPUidle for CPU3 registered
[    4.827223] hub 1-1:1.0: USB hub found
[    4.849750] hub 1-1:1.0: 3 ports detected
[    4.849786] CPUidle for CPU4 registered
[    4.850016] ALSA device list:
[    4.850020]   #0: ARM AC'97 Interface PL041 rev0 at 0x1c040000, irq 43
[    4.903351] Freeing init memory: 272K
Loading, please wait...
modprobe: FATAL: Could not load /lib/modules/3.9.0-rc3/modules.dep: No such file or directory

mount: mounting udev on /dev failed: No such device
W: devtmpfs not available, falling back to tmpfs for /dev
Begin: Loading essential drivers ... done.
Begin: Running /scripts/init-premount ... done.
Begin: Mounting root file system ... Begin: Running /scripts/local-top ... done.
[    5.192612] atkbd serio0: keyboard reset failed on 1c060000.kmi
[    6.425240] atkbd serio1: keyboard reset failed on 1c070000.kmi
Begin: Running /scripts/local-premount ... done.
FATAL: Could not load /lib/modules/3.9.0-rc3/modules.dep: No such file or directory
[   11.802805] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
Begin: Running /scripts/local-bottom ... done.
done.
Begin: Running /scripts/init-bottom ... done.
auto-serial-console start/running, process 4061

Last login: Mon Apr 29 17:04:17 UTC 2013 on tty1
Welcome to Linaro 12.06 (GNU/Linux 3.9.0-rc3 armv7l)

 * Documentation:  https://wiki.linaro.org/
root@master:~# export PS1="root@master [rc=$(echo \$?)]# "

    root@master [rc=0]# <LAVA_DISPATCHER>2013-04-29 05:04:46 PM INFO: Waiting for network to come up

    LC_ALL=C ping -W4 -c1 10.1.103.191
PING 10.1.103.191 (10.1.103.191) 56(84) bytes of data.
64 bytes from 10.1.103.191: icmp_req=1 ttl=61 time=2.81 ms

--- 10.1.103.191 ping statistics ---
1 packets transmitted, 1 received, 0% packet loss, time 0ms
rtt min/avg/max/mdev = 2.811/2.811/2.811/0.000 ms
root@master [rc=0]# ifconfig eth0 | grep 'inet addr' | awk -F: '{print $2}' |awk  '{print "<" $1 ">"}'
<10.1.82.55>
root@master [rc=0]# echo "device_version=$(lava-master-image-info --master-image -hwpack | sed 's/[^0-9-]//g; s/^-\+//')/$(lava-master-image-info --master-image- rootfs | sed 's/[^0-9-]//g; s/^-\+//')"
device_version=20120627-132/20120626-237

    root@master [rc=0]# <LAVA_DISPATCHER>2013-04-29 05:05:04 PM INFO: System is in master image now
<LAVA_DISPATCHER>2013-04-29 05:05:04 PM INFO: preparing to deploy on pdswlava-vetc2-05
<LAVA_DISPATCHER>2013-04-29 05:05:04 PM INFO:   hwpack: http://pdsw-ci/downloads/releases/latest/ubuntu/release-candidate/hwpack_linaro-vexpress_undertest_armhf_supported.tar.gz
<LAVA_DISPATCHER>2013-04-29 05:05:04 PM INFO:   rootfs: http://pdsw-ci/downloads/releases/latest/ubuntu/release-candidate/linaro-quantal-nano-undertest.tar.gz
<LAVA_DISPATCHER>2013-04-29 05:05:04 PM INFO: Downloading the http://pdsw-ci/downloads/releases/latest/ubuntu/release-candidate/hwpack_linaro-vexpress_undertest_armhf_supported.tar.gz file
<LAVA_DISPATCHER>2013-04-29 05:05:04 PM INFO: Downloading image: http://pdsw-ci/downloads/releases/latest/ubuntu/release-candidate/hwpack_linaro-vexpress_undertest_armhf_supported.tar.gz
<LAVA_DISPATCHER>2013-04-29 05:05:05 PM INFO: Downloading the http://pdsw-ci/downloads/releases/latest/ubuntu/release-candidate/linaro-quantal-nano-undertest.tar.gz file
<LAVA_DISPATCHER>2013-04-29 05:05:05 PM INFO: Downloading image: http://pdsw-ci/downloads/releases/latest/ubuntu/release-candidate/linaro-quantal-nano-undertest.tar.gz
<LAVA_DISPATCHER>2013-04-29 05:05:06 PM INFO: linaro-media-create version information
<LAVA_DISPATCHER>2013-04-29 05:05:06 PM INFO: client.device_type = vexpress-tc2
<LAVA_DISPATCHER>2013-04-29 05:05:06 PM INFO: Executing the linaro-media-create command
<LAVA_DISPATCHER>2013-04-29 05:05:06 PM INFO: sudo flock /var/lock/lava-lmc.lck linaro-media-create --hwpack-force-yes --dev vexpress --image-file /srv/lava/instances/production/var/www/lava-server/images/tmpvWNKeB/lava.img --binary /srv/lava/instances/production/var/www/lava-server/images/tmpvWNKeB/linaro-quantal-nano-undertest.tar.gz --hwpack /srv/lava/instances/production/var/www/lava-server/images/tmpvWNKeB/hwpack_linaro-vexpress_undertest_armhf_supported.tar.gz --image-size 3G --bootloader u_boot
    skip 245 lines to next log entry ���
    Searching correct rootfs path
------------------------------------------------------------
Installing (linaro-hwpack-install) hwpack_linaro-vexpress_undertest_armhf_supported.tar.gz in target rootfs.
Unpacking hardware pack ...Done
Updating apt package lists ...
Reading package lists...
W: Duplicate sources.list entry http://ports.ubuntu.com/ubuntu-ports/ quantal/main armhf Packages (/var/lib/apt/lists/ports.ubuntu.com_ubuntu-ports_dists_quantal_main_binary-armhf_Packages)
W: Duplicate sources.list entry http://ports.ubuntu.com/ubuntu-ports/ quantal/universe armhf Packages (/var/lib/apt/lists/ports.ubuntu.com_ubuntu-ports_dists_quantal_universe_binary-armhf_Packages)
W: You may want to run apt-get update to correct these problems
Ign file: ./ InRelease
Ign file: ./ Release.gpg
Ign file: ./ Release
Ign file: ./ Translation-en
Ign http://ports.ubuntu.com quantal InRelease
Ign http://ppa.launchpad.net quantal InRelease
Hit http://ports.ubuntu.com quantal Release.gpg
Get:1 http://ppa.launchpad.net quantal Release.gpg [316 B]
Hit http://ports.ubuntu.com quantal Release
Get:2 http://ppa.launchpad.net quantal Release [11.9 kB]
Hit http://ports.ubuntu.com quantal/main Sources
Hit http://ports.ubuntu.com quantal/universe Sources
Hit http://ports.ubuntu.com quantal/main armhf Packages
Hit http://ports.ubuntu.com quantal/universe armhf Packages
Get:3 http://ppa.launchpad.net quantal/main Sources [19.0 kB]
Hit http://ports.ubuntu.com quantal/main Translation-en
Hit http://ports.ubuntu.com quantal/universe Translation-en
Get:4 http://ppa.launchpad.net quantal/main armhf Packages [42.6 kB]
Ign http://ppa.launchpad.net quantal/main Translation-en
Fetched 73.8 kB in 0s (103 kB/s)
Reading package lists...
W: Duplicate sources.list entry http://ports.ubuntu.com/ubuntu-ports/ quantal/main armhf Packages (/var/lib/apt/lists/ports.ubuntu.com_ubuntu-ports_dists_quantal_main_binary-armhf_Packages)
W: Duplicate sources.list entry http://ports.ubuntu.com/ubuntu-ports/ quantal/universe armhf Packages (/var/lib/apt/lists/ports.ubuntu.com_ubuntu-ports_dists_quantal_universe_binary-armhf_Packages)
W: You may want to run apt-get update to correct these problems
Installing packages ...Reading package lists... 0%Reading package lists... 100%Reading package lists... Done
Building dependency tree... 0%Building dependency tree... 0%Building dependency tree... 50%Building dependency tree... 50%Building dependency tree... 91%Building dependency tree       
Reading state information... 0%Reading state information... 5%Reading state information... Done
The following extra packages will be installed:
  linux-image-3.9.0-1-linaro-vexpress
Suggested packages:
  fdutils linux-linaro-vexpress-3.9-doc-3.9.0
  linux-linaro-vexpress-3.9-source-3.9.0 linux-linaro-vexpress-3.9-tools
The following NEW packages will be installed:
  devio flash-kernel grub-arm kvm-boot-wrapper libuuid-perl linux-base
  linux-firmware linux-headers-3.9.0-1-linaro-vexpress
  linux-headers-linaro-vexpress linux-image-3.9.0-1-linaro-vexpress
  linux-image-3.9.0-rc7 linux-image-linaro-vexpress
  u-boot-linaro-vexpress-ca9x4 u-boot-tools uboot-mkimage
  ubuntu-vexpress-extras-config uefi-image-vexpress
0 upgraded, 17 newly installed, 0 to remove and 2 not upgraded.
Need to get 4789 kB/46.3 MB of archives.
After this operation, 6619 kB of additional disk space will be used.
WARNING: The following packages cannot be authenticated!
  linux-image-3.9.0-1-linaro-vexpress devio libuuid-perl linux-base
  flash-kernel grub-arm kvm-boot-wrapper linux-firmware
  linux-headers-3.9.0-1-linaro-vexpress linux-headers-linaro-vexpress
  linux-image-3.9.0-rc7 linux-image-linaro-vexpress
  u-boot-linaro-vexpress-ca9x4 u-boot-tools uboot-mkimage
  ubuntu-vexpress-extras-config uefi-image-vexpress
Authentication warning overridden.
0% [Working]            0% [Connecting to ppa.launchpad.net]0% [Connecting to ppa.launchpad.net]0% [Connecting to ppa.launchpad.net]0% [Connecting to ppa.launchpad.net]                                    Get:1 http://ppa.launchpad.net/linaro-maintainers/overlay/ubuntu/ quantal/main linux-image-3.9.0-1-linaro-vexpress armhf 3.9.0-1.1ubuntu1~ci+130422174343 [4789 kB]
                                    0% [1 linux-image-3.9.0-1-linaro-vexpress 0 B/4789 kB 0%]                                                         15% [1 linux-image-3.9.0-1-linaro-vexpress 709 kB/4789 kB 15%]18% [1 linux-image-3.9.0-1-linaro-vexpress 883 kB/4789 kB 18%]18% [1 linux-image-3.9.0-1-linaro-vexpress 883 kB/4789 kB 18%]                                                              40% [1 linux-image-3.9.0-1-linaro-vexpress 1918 kB/4789 kB 40%]61% [1 linux-image-3.9.0-1-linaro-vexpress 2922 kB/4789 kB 61%]84% [1 linux-image-3.9.0-1-linaro-vexpress 4006 kB/4789 kB 84%]                                                               100% [Working]100% [Working]100% [Working]100% [Working]100% [Working]100% [Working]100% [Working]100% [Working]100% [Working]100% [Working]100% [Working]100% [Working]100% [Working]100% [Working]100% [Working]              100% [Working]                                                      760 kB/s 0s                                                                               Fetched 4789 kB in 6s (760 kB/s)
W: Duplicate sources.list entry http://ports.ubuntu.com/ubuntu-ports/ quantal/main armhf Packages (/var/lib/apt/lists/ports.ubuntu.com_ubuntu-ports_dists_quantal_main_binary-armhf_Packages)
W: Duplicate sources.list entry http://ports.ubuntu.com/ubuntu-ports/ quantal/universe armhf Packages (/var/lib/apt/lists/ports.ubuntu.com_ubuntu-ports_dists_quantal_universe_binary-armhf_Packages)
Preconfiguring packages ...
Can not write log, openpty() failed (/dev/pts not mounted?)
Selecting previously unselected package linux-image-3.9.0-1-linaro-vexpress.
(Reading database ... (Reading database ... 5%(Reading database ... 10%(Reading database ... 15%(Reading database ... 20%(Reading database ... 25%(Reading database ... 30%(Reading database ... 35%(Reading database ... 40%(Reading database ... 45%(Reading database ... 50%(Reading database ... 55%(Reading database ... 60%(Reading database ... 65%(Reading database ... 70%(Reading database ... 75%(Reading database ... 80%(Reading database ... 85%(Reading database ... 90%(Reading database ... 95%(Reading database ... 100%(Reading database ... 8421 files and directories currently installed.)
Unpacking linux-image-3.9.0-1-linaro-vexpress (from .../linux-image-3.9.0-1-linaro-vexpress_3.9.0-1.1ubuntu1~ci+130422174343_armhf.deb) ...
Done.
Selecting previously unselected package devio.
Unpacking devio (from .../devio_1.2-1build2_armhf.deb) ...
Selecting previously unselected package libuuid-perl.
Unpacking libuuid-perl (from .../libuuid-perl_0.02-4ubuntu2_armhf.deb) ...
Selecting previously unselected package linux-base.
Unpacking linux-base (from .../linux-base_3.5ubuntu4_all.deb) ...
Selecting previously unselected package flash-kernel.
Unpacking flash-kernel (from .../flash-kernel_3.0~rc.4ubuntu27.2~linaro1_armhf.deb) ...
Selecting previously unselected package grub-arm.
Unpacking grub-arm (from .../grub-arm_2.00+bzr4618+20130322-0linaro1_armhf.deb) ...
Selecting previously unselected package kvm-boot-wrapper.
Unpacking kvm-boot-wrapper (from .../kvm-boot-wrapper_0.1~ppa1+bzr48+bzr16~quantal1_armhf.deb) ...
Selecting previously unselected package linux-firmware.
Unpacking linux-firmware (from .../linux-firmware_1.98~linaro1_all.deb) ...
Selecting previously unselected package linux-headers-3.9.0-1-linaro-vexpress.
Unpacking linux-headers-3.9.0-1-linaro-vexpress (from .../linux-headers-3.9.0-1-linaro-vexpress_3.9.0-1.1ubuntu1~ci+130323130056_armhf.deb) ...
Selecting previously unselected package linux-headers-linaro-vexpress.
Unpacking linux-headers-linaro-vexpress (from .../linux-headers-linaro-vexpress_3.9.0.1.1_armhf.deb) ...
Selecting previously unselected package linux-image-3.9.0-rc7.
Unpacking linux-image-3.9.0-rc7 (from .../linux-image-3.9.0-rc7_3.9.0-rc7-1_armhf.deb) ...
Selecting previously unselected package linux-image-linaro-vexpress.
Unpacking linux-image-linaro-vexpress (from .../linux-image-linaro-vexpress_3.9.0.1.1_armhf.deb) ...
Selecting previously unselected package u-boot-linaro-vexpress-ca9x4.
Unpacking u-boot-linaro-vexpress-ca9x4 (from .../u-boot-linaro-vexpress-ca9x4_2012.08.2+6697+48+201211212230~precise1_armhf.deb) ...
Selecting previously unselected package u-boot-tools.
Unpacking u-boot-tools (from .../u-boot-tools_2012.04.01-2_armhf.deb) ...
Selecting previously unselected package uboot-mkimage.
Unpacking uboot-mkimage (from .../uboot-mkimage_2012.04.01-2_all.deb) ...
Selecting previously unselected package ubuntu-vexpress-extras-config.
Unpacking ubuntu-vexpress-extras-config (from .../ubuntu-vexpress-extras-config_0.3_all.deb) ...
Selecting previously unselected package uefi-image-vexpress.
Unpacking uefi-image-vexpress (from .../uefi-image-vexpress_0.1+git11+20130222+d9875a6-0linaro1_armhf.deb) ...
Processing triggers for ureadahead ...
Can not write log, openpty() failed (/dev/pts not mounted?)
Setting up linux-image-3.9.0-1-linaro-vexpress (3.9.0-1.1ubuntu1~ci+130422174343) ...
Running depmod.
update-initramfs: deferring update (hook will be called later)
Examining /etc/kernel/postinst.d.
run-parts: executing /etc/kernel/postinst.d/initramfs-tools 3.9.0-1-linaro-vexpress /boot/vmlinuz-3.9.0-1-linaro-vexpress
update-initramfs: Generating /boot/initrd.img-3.9.0-1-linaro-vexpress
/bin/df: Warning: cannot read table of mounted file systems: No such file or directory
Setting up devio (1.2-1build2) ...
Setting up libuuid-perl (0.02-4ubuntu2) ...
Setting up linux-base (3.5ubuntu4) ...
Setting up flash-kernel (3.0~rc.4ubuntu27.2~linaro1) ...
Setting up grub-arm (2.00+bzr4618+20130322-0linaro1) ...
Setting up kvm-boot-wrapper (0.1~ppa1+bzr48+bzr16~quantal1) ...
Setting up linux-firmware (1.98~linaro1) ...
Setting up linux-headers-3.9.0-1-linaro-vexpress (3.9.0-1.1ubuntu1~ci+130323130056) ...
Setting up linux-headers-linaro-vexpress (3.9.0.1.1) ...
Setting up linux-image-3.9.0-rc7 (3.9.0-rc7-1) ...
update-initramfs: Generating /boot/initrd.img-3.9.0-rc7
/bin/df: Warning: cannot read table of mounted file systems: No such file or directory
Setting up linux-image-linaro-vexpress (3.9.0.1.1) ...
Setting up u-boot-linaro-vexpress-ca9x4 (2012.08.2+6697+48+201211212230~precise1) ...
Setting up u-boot-tools (2012.04.01-2) ...
Setting up uboot-mkimage (2012.04.01-2) ...
Setting up ubuntu-vexpress-extras-config (0.3) ...
update-rc.d: warning: ondemand start runlevel arguments (none) do not match LSB Default-Start values (2 3 4 5)
 Disabling system startup links for /etc/init.d/ondemand ...
 Removing any system startup links for /etc/init.d/ondemand ...
   /etc/rc2.d/S99ondemand
   /etc/rc3.d/S99ondemand
   /etc/rc4.d/S99ondemand
   /etc/rc5.d/S99ondemand
 Adding system startup for /etc/init.d/ondemand ...
   /etc/rc2.d/K01ondemand -> ../init.d/ondemand
   /etc/rc3.d/K01ondemand -> ../init.d/ondemand
   /etc/rc4.d/K01ondemand -> ../init.d/ondemand
   /etc/rc5.d/K01ondemand -> ../init.d/ondemand
update-rc.d: /etc/init.d/cpufrequtils: file does not exist
invoke-rc.d: policy-rc.d denied execution of start.
Setting up uefi-image-vexpress (1:0.1+git11+20130222+d9875a6-0linaro1) ...
Processing triggers for ureadahead ...
Done
Cleaning up ...W: Duplicate sources.list entry http://ports.ubuntu.com/ubuntu-ports/ quantal/main armhf Packages (/var/lib/apt/lists/ports.ubuntu.com_ubuntu-ports_dists_quantal_main_binary-armhf_Packages)
W: Duplicate sources.list entry http://ports.ubuntu.com/ubuntu-ports/ quantal/universe armhf Packages (/var/lib/apt/lists/ports.ubuntu.com_ubuntu-ports_dists_quantal_universe_binary-armhf_Packages)
W: You may want to run apt-get update to correct these problems
W: Duplicate sources.list entry http://ports.ubuntu.com/ubuntu-ports/ quantal/main armhf Packages (/var/lib/apt/lists/ports.ubuntu.com_ubuntu-ports_dists_quantal_main_binary-armhf_Packages)
W: Duplicate sources.list entry http://ports.ubuntu.com/ubuntu-ports/ quantal/universe armhf Packages (/var/lib/apt/lists/ports.ubuntu.com_ubuntu-ports_dists_quantal_universe_binary-armhf_Packages)
W: You may want to run apt-get update to correct these problems
Done
------------------------------------------------------------
proc has been unmounted
Sleeping for 1 second(s) to wait for the partition to settle
Disk /srv/lava/instances/production/var/www/lava-server/images/tmpvWNKeB/lava.img: cannot get geometry

sfdisk: ERROR: sector 0 does not have an msdos signature
 /srv/lava/instances/production/var/www/lava-server/images/tmpvWNKeB/lava.img: unrecognized partition table type
No partitions found
Warning: /srv/lava/instances/production/var/www/lava-server/images/tmpvWNKeB/lava.img is not a block device
Disk /srv/lava/instances/production/var/www/lava-server/images/tmpvWNKeB/lava.img: cannot get geometry

sfdisk: ERROR: sector 0 does not have an msdos signature
 /srv/lava/instances/production/var/www/lava-server/images/tmpvWNKeB/lava.img: unrecognized partition table type
No partitions found
Warning: partition 1 does not end at a cylinder boundary
BLKRRPART: Inappropriate ioctl for device
If you created or changed a DOS partition, /dev/foo7, say, then use dd(1)
to zero the first 512 bytes:  dd if=/dev/zero of=/dev/foo7 bs=512 count=1
(See fdisk(8).)
Sleeping for 1 second(s) to wait for the partition to settle
Disk /srv/lava/instances/production/var/www/lava-server/images/tmpvWNKeB/lava.img: cannot get geometry
		start: (c,h,s) expected (0,1,1) found (0,1,32)
		end: (c,h,s) expected (6,160,25) found (25,127,31)
		start: (c,h,s) expected (6,160,27) found (26,0,1)
		end: (c,h,s) expected (391,159,24) found (1023,127,32)
partition ends on cylinder 1023, beyond the end of the disk

Formating boot partition

mkfs.vfat 3.0.12 (29 Oct 2011)
Loop device does not match a floppy size, using default hd params

Formating root partition

mke2fs 1.42 (29-Nov-2011)
Discarding device blocks:   4096/773120528384/773120             done                            
Filesystem label=rootfs
OS type: Linux
Block size=4096 (log=2)
Fragment size=4096 (log=2)
Stride=0 blocks, Stripe width=0 blocks
193536 inodes, 773120 blocks
38656 blocks (5.00%) reserved for the super user
First data block=0
Maximum filesystem blocks=792723456
24 block groups
32768 blocks per group, 32768 fragments per group
8064 inodes per group
Superblock backups stored on blocks: 
	32768, 98304, 163840, 229376, 294912

Allocating group tables:  0/24 1/24 2/24 3/24 4/24 5/24 6/24 7/24 8/24 9/2410/2411/2412/2413/2414/2415/2416/2417/2418/2419/2420/2421/2422/2423/24     done                            
Writing inode tables:  0/24 1/24 2/24 3/24 4/24 5/24 6/24 7/24 8/24 9/2410/2411/2412/2413/2414/2415/2416/2417/2418/2419/2420/2421/2422/2423/24     done                            
Creating journal (16384 blocks): done
Writing superblocks and filesystem accounting information:  0/24 1/24 2/24 3/24 4/24 5/24 6/24 7/24 8/24 9/2410/2411/2412/2413/2414/2415/2416/2417/2418/2419/2420/2421/2422/2423/24     done

`/tmp/tmpiFwbcx/u_boot/usr/lib/u-boot/vexpress_ca9x4/u-boot.bin' -> `/tmp/tmpauBcJM/boot-disc/u-boot.bin'
Copying dtb files
Could not find a valid dtb file, skipping it.
Could not find a valid dtb file, skipping it.
Will use kernel=/tmp/tmpauBcJM/rootfs/binary/boot/vmlinuz-3.9.0-1-linaro-vexpress, initrd=/tmp/tmpauBcJM/rootfs/binary/boot/initrd.img-3.9.0-1-linaro-vexpress, dtb=None.
Image Name:   Linux
Created:      Mon Apr 29 17:08:16 2013
Image Type:   ARM Linux Kernel Image (uncompressed)
Data Size:    4282112 Bytes = 4181.75 kB = 4.08 MB
Load Address: 60008000
Entry Point:  60008000
Image Name:   initramfs
Created:      Mon Apr 29 17:08:16 2013
Image Type:   ARM Linux RAMDisk Image (uncompressed)
Data Size:    1478321 Bytes = 1443.67 kB = 1.41 MB
Load Address: 00000000
Entry Point:  00000000
Image Name:   boot script
Created:      Mon Apr 29 17:08:16 2013
Image Type:   ARM Linux Script (uncompressed)
Data Size:    337 Bytes = 0.33 kB = 0.00 MB
Load Address: 00000000
Entry Point:  00000000
Contents:
   Image 0: 329 Bytes = 0.32 kB = 0.00 MB
`/tmp/tmpauBcJM/boot-disc/boot.scr' -> `/tmp/tmpauBcJM/boot-disc/boot.ini'

Populating rootfs partition
Be patient, this may take a few minutes


Creating /etc/flash-kernel.conf


Updating /etc/network/interfaces

Done creating Linaro image on /srv/lava/instances/production/var/www/lava-server/images/tmpvWNKeB/lava.img


    root@master [rc=0]# <LAVA_DISPATCHER>2013-04-29 05:08:36 PM INFO: Format testboot and testrootfs partitions

    umount /dev/disk/by-label/testrootfs
umount: /dev/disk/by-label/testrootfs: not mounted
root@master [rc=1]# mkfs -t ext4 -q /dev/disk/by-label/testrootfs -L testrootfs
root@master [rc=0]# umount /dev/disk/by-label/testboot
umount: /dev/disk/by-label/testboot: not mounted
root@master [rc=1]# mkfs.vfat /dev/disk/by-label/testboot -n testboot
mkfs.vfat 3.0.12 (29 Oct 2011)

    root@master [rc=0]# <LAVA_DISPATCHER>2013-04-29 05:19:30 PM INFO: Deploying linaro image
    skip 31 lines to next log entry ���
    udevadm trigger
root@master [rc=0]# mkdir -p /mnt/root
root@master [rc=0]# mount /dev/disk/by-label/testrootfs /mnt/root
root@master [rc=0]# wget --no-check-certificate --no-proxy --connect-timeout=30  -S --progress=dot -e dotbytes=2M -O- http://10.1.103.191/images/tmpvWNKeB/root.t gz | tar --warning=no-timestamp --numeric-owner -C /mnt/root -xzf -
--2013-04-29 17:19:58--  http://10.1.103.191/images/tmpvWNKeB/root.tgz
Connecting to 10.1.103.191:80... connected.
HTTP request sent, awaiting response... 
  HTTP/1.1 200 OK
  Date: Mon, 29 Apr 2013 17:19:53 GMT
  Server: Apache/2.2.22 (Ubuntu)
  Last-Modified: Mon, 29 Apr 2013 17:08:36 GMT
  ETag: "e01c2-7afe18c-4db82ef790919"
  Accept-Ranges: bytes
  Content-Length: 128967052
  Keep-Alive: timeout=5, max=100
  Connection: Keep-Alive
  Content-Type: application/x-gzip
Length: 128967052 (123M) [application/x-gzip]
Saving to: `STDOUT'

     0K .......... .......... .......... .......... .......... 81%  136K 2m54s
102400K .......... .                                          100%  208K=14m29s

2013-04-29 17:34:27 (145 KB/s) - written to stdout [128967052/128967052]

root@master [rc=0]# chroot /mnt/root which dpkg-divert
/usr/sbin/dpkg-divert
root@master [rc=0]# chroot /mnt/root dpkg-divert --local /usr/sbin/flash-kernel
Adding 'local diversion of /usr/sbin/flash-kernel to /usr/sbin/flash-kernel.distrib'
root@master [rc=0]# chroot /mnt/root ln -sf /bin/true /usr/sbin/flash-kernel
root@master [rc=0]# umount /mnt/root

    root@master [rc=0]# <LAVA_DISPATCHER>2013-04-29 05:40:52 PM INFO: Deploying linaro bootfs
    skip 25 lines to next log entry ���
    udevadm trigger
root@master [rc=0]# mkdir -p /mnt/boot
root@master [rc=0]# mount /dev/disk/by-label/testboot /mnt/boot
root@master [rc=0]# wget --no-check-certificate --no-proxy --connect-timeout=30  -S --progress=dot -e dotbytes=2M -O- http://10.1.103.191/images/tmpvWNKeB/boot.t gz | tar --warning=no-timestamp --numeric-owner -C /mnt/boot -xzf -
--2013-04-29 17:41:18--  http://10.1.103.191/images/tmpvWNKeB/boot.tgz
Connecting to 10.1.103.191:80... connected.
HTTP request sent, awaiting response... 
  HTTP/1.1 200 OK
  Date: Mon, 29 Apr 2013 17:41:13 GMT
  Server: Apache/2.2.22 (Ubuntu)
  Last-Modified: Mon, 29 Apr 2013 17:08:21 GMT
  ETag: "e01c1-732b30-4db82ee8f7439"
  Accept-Ranges: bytes
  Content-Length: 7547696
  Keep-Alive: timeout=5, max=100
  Connection: Keep-Alive
  Content-Type: application/x-gzip
Length: 7547696 (7.2M) [application/x-gzip]
Saving to: `STDOUT'

     0K ...                                                   100% 4.86M=1.5s

2013-04-29 17:41:20 (4.86 MB/s) - written to stdout [7547696/7547696]

root@master [rc=0]# umount /mnt/boot

    root@master [rc=0]# <LAVA_DISPATCHER>2013-04-29 05:42:00 PM INFO: [ACTION-E] deploy_linaro_image is finished successfully.
<LAVA_DISPATCHER>2013-04-29 05:42:00 PM INFO: [ACTION-B] boot_linaro_image is started with {}
<LAVA_DISPATCHER>2013-04-29 05:42:00 PM INFO: Boot the test image
<LAVA_DISPATCHER>2013-04-29 05:42:00 PM INFO: boot_cmds attribute: boot_cmds
<LAVA_DISPATCHER>2013-04-29 05:42:00 PM INFO: Perform soft reboot the system
    skip 233 lines to next log entry ���
    ^C
root@master [rc=130]# reboot

Broadcast message from root@master
	(/dev/ttyAMA0) at 17:42 ...

The system is going down for reboot NOW!
root@master [rc=0]#  * Asking all remaining processes to terminate...        [ OK ]
 * All processes ended within 1 seconds....        [ OK ]
 * Deconfiguring network interfaces...        [ OK ]
 * Deactivating swap...        [ OK ]
umount: /run/lock: not mounted
 * Will now restart
[ 2330.840751] Restarting system.
Rebooting...
Disabling debug USB.
Switching off ATX PSU.
Board powered down, rebooting...

ARM V2M Firmware v3.1.1
Build Date: Aug 20 2012

Date: Mon 29 Apr 2013
Time:     17:42:16    

Powering up system...
Daughterboard fitted to site 1.

Switching on ATXPSU...
ATX3V3: ON
VIOset: 1.8V
MBtemp: 33 degC

Configuring motherboard (rev D, var A)...
IOFPGA  config: PASSED
MUXFPGA config: PASSED
OSC CLK config: PASSED

Testing SMC devices (FPGA build 255)...
SRAM 32MB test: PASSED
VRAM  8MB test: PASSED
LAN9118   test: PASSED
USB & OTG test: PASSED
KMI1/KMI2 test: PASSED
MMC & SD  test: PASSED
DVI image test: PASSED
AACI AC97 test: PASSED
CF card   test: PASSED
UART port test: PASSED
MAC addrs test: PASSED

Reading Site 1 Board File \SITE1\HBI0249A\board.txt
DB1 JTAG configuration complete.
Setting DB1 OSCCLKS...
DB1.0 DCC 0 SPI configuration complete.

Writing SCC 0x40610007 with 0xFF00FF00
Writing SCC 0x40610046 with 0x01CD1011
Writing SCC 0x406101C0 with 0x0032F003
Writing SCC 0x40610048 with 0x022F1010
Writing SCC 0x40610049 with 0x0011710D
Writing SCC 0x4061004A with 0x022F1010
Writing SCC 0x4061004B with 0x0011710D
Writing SCC 0x4061004C with 0x022F1010
Writing SCC 0x4061004D with 0x0011710D
Writing SCC 0x4061004E with 0x022F1010
Writing SCC 0x4061004F with 0x0011710D
Writing SCC 0x40610300 with 0x00000005
Writing SCC 0x40610301 with 0x060E0356
Writing SCC 0x40610302 with 0x00000000
Writing SCC 0x40610303 with 0x00000000
Writing SCC 0x40610304 with 0x384061A8
Writing SCC 0x40610305 with 0x38407530
Writing SCC 0x40610306 with 0x384088B8
Writing SCC 0x40610307 with 0x38409C40
Writing SCC 0x40610308 with 0x3840AFC8
Writing SCC 0x40610309 with 0x3840C350
Writing SCC 0x4061030A with 0x3CF0D6D8
Writing SCC 0x4061030B with 0x41A0EA60
Writing SCC 0x4061030C with 0x3840445C
Writing SCC 0x4061030D with 0x38404E20
Writing SCC 0x4061030E with 0x384061A8
Writing SCC 0x4061030F with 0x38407530
Writing SCC 0x40610310 with 0x384088B8
Writing SCC 0x40610311 with 0x38409C40
Writing SCC 0x40610312 with 0x3CF0AFC8
Writing SCC 0x40610313 with 0x41A0C350
DB1.0 DCC 0 SCC configuration complete.

DB SMB clock enabled.
Waiting for SITE1 CB_READY...Waiting for SITE1 CB_READY...Waiting for SITE1 CB_READY...Waiting for SITE1 CB_READY...Waiting for SITE1 CB_READY...Waiting for SITE1 CB_READY...Waiting for SITE1 CB_READY...Waiting for SITE1 CB_READY...Waiting for SITE1 CB_READY...Waiting for SITE1 CB_READY...Waiting for SITE1 CB_READY...Waiting for SITE1 CB_READY...Waiting for SITE1 CB_READY...Waiting for SITE1 CB_READY...Waiting for SITE1 CB_READY...Waiting for SITE1 CB_READY...Waiting for SITE1 CB_READY...Waiting for SITE1 CB_READY...Waiting for SITE1 CB_READY...Waiting for SITE1 CB_READY...Waiting for SITE1 CB_READY...Waiting for SITE1 CB_READY...Waiting for SITE1 CB_READY...Waiting for SITE1 CB_READY...
Testing SMB clock...
Configuring MUXFPGA for MB.
Setting DVI mode for VGA.
Releasing Daughterboard resets.
Switching MCC log to UART1.

ARM Versatile Express Boot Monitor
Version:    V5.1.9
Build Date: Dec  3 2012
Daughterboard Site 1: V2P-CA15_A7 Cortex A15
Daughterboard Site 2: Not Used
Running boot script from flash - BOOTSCRIPT
UEFI firmware (version  built at 16:38:55 on Dec  3 2012)
add-symbol-file /linaro/lt/uefi/uefi-next.git/edk2/Build/ArmVExpress-CTA15-A7/DEBUG_ARMLINUXGCC/ARM/ArmPlatformPkg/PrePi/PeiMPCore/DEBUG/ArmPlatformPrePiMPCore.dll 0x81000180
Info: 2GB Test Chip 2 detected.
add-symbol-file /linaro/lt/uefi/uefi-next.git/edk2/Build/ArmVExpress-CTA15-A7/DEBUG_ARMLINUXGCC/ARM/MdeModulePkg/Core/Dxe/DxeMain/DEBUG/DxeCore.dll 0xBFAB7240
Loading DxeCore at 0x00BFAB7000 EntryPoint=0x00BFAB7241
add-symbol-file /linaro/lt/uefi/uefi-next.git/edk2/Build/ArmVExpress-CTA15-A7/DEBUG_ARMLINUXGCC/ARM/MdeModulePkg/Core/Dxe/DxeMain/DEBUG/DxeCore.dll 0xBFAB7000
HOBLIST address in DXE = 0xBF8C9010
Memory Allocation 0x00000004 0xBFFEB000 - 0xBFFEBFFF
Memory Allocation 0x00000004 0xBFFE3000 - 0xBFFEAFFF
Memory Allocation 0x00000004 0xBFFE2000 - 0xBFFE2FFF
Memory Allocation 0x00000004 0xBFFE1000 - 0xBFFE1FFF
Memory Allocation 0x00000004 0xBFFE0000 - 0xBFFE0FFF
Memory Allocation 0x00000004 0xBFFDF000 - 0xBFFDFFFF
Memory Allocation 0x00000004 0xBFFEC000 - 0xC0003FFF
Memory Allocation 0x00000004 0xBFFCF000 - 0xBFFDEFFF
Memory Allocation 0x00000004 0xBFD57000 - 0xBFFCEFFF
Memory Allocation 0x00000004 0xBFAE0000 - 0xBFD56FFF
Memory Allocation 0x00000004 0xBFAB7000 - 0xBFADFFFF
Memory Allocation 0x00000003 0xBFAB7000 - 0xBFADFFFF
FV Hob            0x81000000 - 0x810AFFFF
FV Hob            0xBFAE0000 - 0xBFD55FFF
FV2 Hob           0xBFAE0000 - 0xBFD55FFF
add-symbol-file /linaro/lt/uefi/uefi-next.git/edk2/Build/ArmVExpress-CTA15-A7/DEBUG_ARMLINUXGCC/ARM/ArmPkg/Drivers/CpuDxe/CpuDxe/DEBUG/ArmCpuDxe.dll 0xBFA5D240
Loading driver at 0x000BFA5D000 EntryPoint=0x000BFA5D26D ArmCpuDxe.efi
add-symbol-file /linaro/lt/uefi/uefi-next.git/edk2/Build/ArmVExpress-CTA15-A7/DEBUG_ARMLINUXGCC/ARM/MdeModulePkg/Core/RuntimeDxe/RuntimeDxe/DEBUG/RuntimeDxe.dll 0xBFA75240
Loading driver at 0x000BFA75000 EntryPoint=0x000BFA7526D RuntimeDxe.efi
add-symbol-file /linaro/lt/uefi/uefi-next.git/edk2/Build/ArmVExpress-CTA15-A7/DEBUG_ARMLINUXGCC/ARM/MdeModulePkg/Universal/SecurityStubDxe/SecurityStubDxe/DEBUG/SecurityStubDxe.dll 0xBFA51240
Loading driver at 0x000BFA51000 EntryPoint=0x000BFA5126D SecurityStubDxe.efi
add-symbol-file /linaro/lt/uefi/uefi-next.git/edk2/Build/ArmVExpress-CTA15-A7/DEBUG_ARMLINUXGCC/ARM/MdeModulePkg/Universal/FaultTolerantWriteDxe/FaultTolerantWriteDxe/DEBUG/FaultTolerantWriteDxe.dll 0xBFA44240
Loading driver at 0x000BFA44000 EntryPoint=0x000BFA4426D FaultTolerantWriteDxe.efi
add-symbol-file /linaro/lt/uefi/uefi-next.git/edk2/Build/ArmVExpress-CTA15-A7/DEBUG_ARMLINUXGCC/ARM/EmbeddedPkg/ResetRuntimeDxe/ResetRuntimeDxe/DEBUG/Reset.dll 0xBAAA3240
Loading driver at 0x000BAAA3000 EntryPoint=0x000BAAA326D Reset.efi
add-symbol-file /linaro/lt/uefi/uefi-next.git/edk2/Build/ArmVExpress-CTA15-A7/DEBUG_ARMLINUXGCC/ARM/EmbeddedPkg/RealTimeClockRuntimeDxe/RealTimeClockRuntimeDxe/DEBUG/RealTimeClock.dll 0xBAA97240
Loading driver at 0x000BAA97000 EntryPoint=0x000BAA9726D RealTimeClock.efi
add-symbol-file /linaro/lt/uefi/uefi-next.git/edk2/Build/ArmVExpress-CTA15-A7/DEBUG_ARMLINUXGCC/ARM/MdeModulePkg/Universal/HiiDatabaseDxe/HiiDatabaseDxe/DEBUG/HiiDatabase.dll 0xBFA27240
Loading driver at 0x000BFA27000 EntryPoint=0x000BFA2726D HiiDatabase.efi
add-symbol-file /linaro/lt/uefi/uefi-next.git/edk2/Build/ArmVExpress-CTA15-A7/DEBUG_ARMLINUXGCC/ARM/EmbeddedPkg/SerialDxe/SerialDxe/DEBUG/SerialDxe.dll 0xBFA1D240
Loading driver at 0x000BFA1D000 EntryPoint=0x000BFA1D26D SerialDxe.efi
add-symbol-file /linaro/lt/uefi/uefi-next.git/edk2/Build/ArmVExpress-CTA15-A7/DEBUG_ARMLINUXGCC/ARM/ArmPlatformPkg/Drivers/SP805WatchdogDxe/SP805WatchdogDxe/DEBUG/SP805WatchdogDxe.dll 0xBFA11240
Loading driver at 0x000BFA11000 EntryPoint=0x000BFA1126D SP805WatchdogDxe.efi
add-symbol-file /linaro/lt/uefi/uefi-next.git/edk2/Build/ArmVExpress-CTA15-A7/DEBUG_ARMLINUXGCC/ARM/MdeModulePkg/Universal/Acpi/AcpiTableDxe/AcpiTableDxe/DEBUG/AcpiTableDxe.dll 0xBFA00240
Loading driver at 0x000BFA00000 EntryPoint=0x000BFA0026D AcpiTableDxe.efi
add-symbol-file /linaro/lt/uefi/uefi-next.git/edk2/Build/ArmVExpress-CTA15-A7/DEBUG_ARMLINUXGCC/ARM/MdeModulePkg/Universal/DevicePathDxe/DevicePathDxe/DEBUG/DevicePathDxe.dll 0xBF9F0240
Loading driver at 0x000BF9F0000 EntryPoint=0x000BF9F026D DevicePathDxe.efi
add-symbol-file /linaro/lt/uefi/uefi-next.git/edk2/Build/ArmVExpress-CTA15-A7/DEBUG_ARMLINUXGCC/ARM/ArmPlatformPkg/Drivers/NorFlashDxe/NorFlashDxe/DEBUG/ArmVeNorFlashDxe.dll 0xBF9E2240
Loading driver at 0x000BF9E2000 EntryPoint=0x000BF9E226D ArmVeNorFlashDxe.efi
add-symbol-file /linaro/lt/uefi/uefi-next.git/edk2/Build/ArmVExpress-CTA15-A7/DEBUG_ARMLINUXGCC/ARM/MdeModulePkg/Universal/Variable/RuntimeDxe/VariableRuntimeDxe/DEBUG/VariableRuntimeDxe.dll 0xBAA84240
Loading driver at 0x000BAA84000 EntryPoint=0x000BAA8426D VariableRuntimeDxe.efi
Variable driver failed to add EFI_MEMORY_RUNTIME attribute to Flash.
add-symbol-file /linaro/lt/uefi/uefi-next.git/edk2/Build/ArmVExpress-CTA15-A7/DEBUG_ARMLINUXGCC/ARM/EmbeddedPkg/MetronomeDxe/MetronomeDxe/DEBUG/MetronomeDxe.dll 0xBF9D7240
Loading driver at 0x000BF9D7000 EntryPoint=0x000BF9D726D MetronomeDxe.efi
add-symbol-file /linaro/lt/uefi/uefi-next.git/edk2/Build/ArmVExpress-CTA15-A7/DEBUG_ARMLINUXGCC/ARM/ArmPkg/Drivers/PL390Gic/PL390GicDxe/DEBUG/PL390GicDxe.dll 0xBF9CB240
Loading driver at 0x000BF9CB000 EntryPoint=0x000BF9CB26D PL390GicDxe.efi
add-symbol-file /linaro/lt/uefi/uefi-next.git/edk2/Build/ArmVExpress-CTA15-A7/DEBUG_ARMLINUXGCC/ARM/ArmPlatformPkg/Drivers/LcdGraphicsOutputDxe/HdLcdGraphicsOutputDxe/DEBUG/HdLcdGraphicsDxe.dll 0xBF9BC240
Loading driver at 0x000BF9BC000 EntryPoint=0x000BF9BC26D HdLcdGraphicsDxe.efi
add-symbol-file /linaro/lt/uefi/uefi-next.git/edk2/Build/ArmVExpress-CTA15-A7/DEBUG_ARMLINUXGCC/ARM/EmbeddedPkg/Universal/MmcDxe/MmcDxe/DEBUG/MmcDxe.dll 0xBF9AB240
Loading driver at 0x000BF9AB000 EntryPoint=0x000BF9AB26D MmcDxe.efi
add-symbol-file /linaro/lt/uefi/uefi-next.git/edk2/Build/ArmVExpress-CTA15-A7/DEBUG_ARMLINUXGCC/ARM/ArmPlatformPkg/Drivers/PL180MciDxe/PL180MciDxe/DEBUG/PL180MciDxe.dll 0xBF99F240
Loading driver at 0x000BF99F000 EntryPoint=0x000BF99F26D PL180MciDxe.efi
Card is SD2.0 => Supports high capacity
High capacity card.
- PrintOCR Ocr (0xC0FF8000)
	- Card operating voltage: 2.7 to 3.6
	- AccessMode: Block Mode (0x2)
	- PowerUp
- PrintCID
	- Manufacturing date: 6/12
	- Product serial number: 0x29B0E28
	- Product revision: 128
	- OEM ID: DS
- PrintRCA: 0xAAAA0520
	- Status: 0x520
	- RCA: 0xAAAA
- PrintCSD Version 2.00/High Capacity
	- Supported card command class: 0x5B5
	- Speed: 3.0 10Mbit/s
	- Maximum Read Data Block: 512
	- Maximum Write Data Block: 512
	- Format(0): Hard disk-like file system with partition table
add-symbol-file /linaro/lt/uefi/uefi-next.git/edk2/Build/ArmVExpress-CTA15-A7/DEBUG_ARMLINUXGCC/ARM/ArmPlatformPkg/Bds/Bds/DEBUG/ArmPlatformBds.dll 0xBF985240
Loading driver at 0x000BF985000 EntryPoint=0x000BF98526D ArmPlatformBds.efi
add-symbol-file /linaro/lt/uefi/uefi-next.git/edk2/Build/ArmVExpress-CTA15-A7/DEBUG_ARMLINUXGCC/ARM/MdeModulePkg/Universal/CapsuleRuntimeDxe/CapsuleRuntimeDxe/DEBUG/CapsuleRuntimeDxe.dll 0xBAA7C240
Loading driver at 0x000BAA7C000 EntryPoint=0x000BAA7C26D CapsuleRuntimeDxe.efi
add-symbol-file /linaro/lt/uefi/uefi-next.git/edk2/Build/ArmVExpress-CTA15-A7/DEBUG_ARMLINUXGCC/ARM/MdeModulePkg/Universal/MonotonicCounterRuntimeDxe/MonotonicCounterRuntimeDxe/DEBUG/MonotonicCounterRuntimeDxe.dll 0xBAA74240
Loading driver at 0x000BAA74000 EntryPoint=0x000BAA7426D MonotonicCounterRuntimeDxe.efi
add-symbol-file /linaro/lt/uefi/uefi-next.git/edk2/Build/ArmVExpress-CTA15-A7/DEBUG_ARMLINUXGCC/ARM/ArmPkg/Drivers/TimerDxe/TimerDxe/DEBUG/ArmTimerDxe.dll 0xBF97A240
Loading driver at 0x000BF97A000 EntryPoint=0x000BF97A26D ArmTimerDxe.efi
add-symbol-file /linaro/lt/uefi/uefi-next.git/edk2/Build/ArmVExpress-CTA15-A7/DEBUG_ARMLINUXGCC/ARM/MdeModulePkg/Universal/Console/ConPlatformDxe/ConPlatformDxe/DEBUG/ConPlatformDxe.dll 0xBF96D240
Loading driver at 0x000BF96D000 EntryPoint=0x000BF96D26D ConPlatformDxe.efi
add-symbol-file /linaro/lt/uefi/uefi-next.git/edk2/Build/ArmVExpress-CTA15-A7/DEBUG_ARMLINUXGCC/ARM/MdeModulePkg/Universal/Console/ConSplitterDxe/ConSplitterDxe/DEBUG/ConSplitterDxe.dll 0xBF95C240
Loading driver at 0x000BF95C000 EntryPoint=0x000BF95C26D ConSplitterDxe.efi
add-symbol-file /linaro/lt/uefi/uefi-next.git/edk2/Build/ArmVExpress-CTA15-A7/DEBUG_ARMLINUXGCC/ARM/MdeModulePkg/Universal/Console/GraphicsConsoleDxe/GraphicsConsoleDxe/DEBUG/GraphicsConsoleDxe.dll 0xBF948240
Loading driver at 0x000BF948000 EntryPoint=0x000BF94826D GraphicsConsoleDxe.efi
add-symbol-file /linaro/lt/uefi/uefi-next.git/edk2/Build/ArmVExpress-CTA15-A7/DEBUG_ARMLINUXGCC/ARM/MdeModulePkg/Universal/Console/TerminalDxe/TerminalDxe/DEBUG/TerminalDxe.dll 0xBF936240
Loading driver at 0x000BF936000 EntryPoint=0x000BF93626D TerminalDxe.efi
add-symbol-file /linaro/lt/uefi/uefi-next.git/edk2/Build/ArmVExpress-CTA15-A7/DEBUG_ARMLINUXGCC/ARM/MdeModulePkg/Universal/Disk/DiskIoDxe/DiskIoDxe/DEBUG/DiskIoDxe.dll 0xBF92A240
Loading driver at 0x000BF92A000 EntryPoint=0x000BF92A26D DiskIoDxe.efi
add-symbol-file /linaro/lt/uefi/uefi-next.git/edk2/Build/ArmVExpress-CTA15-A7/DEBUG_ARMLINUXGCC/ARM/MdeModulePkg/Universal/Disk/PartitionDxe/PartitionDxe/DEBUG/PartitionDxe.dll 0xBF91A240
Loading driver at 0x000BF91A000 EntryPoint=0x000BF91A26D PartitionDxe.efi
add-symbol-file /home/olimar01/edk2/Build/Fat/RELEASE_RVCTLINUX/ARM/FatPkg/EnhancedFatDxe/Fat/DEBUG/Fat.dll 0xBF916240
Loading driver at 0x000BF916000 EntryPoint=0x000BF9196A1 Fat.efi
add-symbol-file /linaro/lt/uefi/uefi-next.git/edk2/Build/ArmVExpress-CTA15-A7/DEBUG_ARMLINUXGCC/ARM/MdeModulePkg/Universal/Disk/UnicodeCollation/EnglishDxe/EnglishDxe/DEBUG/EnglishDxe.dll 0xBF90E240
Loading driver at 0x000BF90E000 EntryPoint=0x000BF90E26D Engl[=3h[=3h[01;01[=3h[=3h[=3h[=3h[=3h[=3hThe default boot selection will start in  10 seconds
[1] LAVA Master Image
	- VenHw(09831032-6FA3-4484-AF4F-0A000A8D3A82)/HD(1,MBR,0x00000000,0x2000,0x1A000)/zImage
	- Initrd: VenHw(09831032-6FA3-4484-AF4F-0A000A8D3A82)/HD(1,MBR,0x00000000,0x2000,0x1A000)/uInitrd
	- Arguments: console=ttyAMA0,38400n8 root=/dev/mmcblk0p2 rootwait ro
	- FDT: VenHw(09831032-6FA3-4484-AF4F-0A000A8D3A82)/HD(1,MBR,0x00000000,0x2000,0x1A000)/tc2_dtb.bin
	- LoaderType: Linux kernel with Local FDT
[2] LAVA Ubuntu Test Image
	- VenHw(09831032-6FA3-4484-AF4F-0A000A8D3A82)/HD(3,MBR,0x00000000,0x200000,0x20000)/uImage
	- Initrd: VenHw(09831032-6FA3-4484-AF4F-0A000A8D3A82)/HD(3,MBR,0x00000000,0x200000,0x20000)/uInitrd
	- Arguments: console=ttyAMA0,38400n8 root=/dev/mmcblk0p5 rootwait ro
	- FDT: VenHw(09831032-6FA3-4484-AF4F-0A000A8D3A82)/HD(3,MBR,0x00000000,0x200000,0x20000)/v2p-ca15-tc2.dtb
	- LoaderType: Linux kernel with Local FDT
[3] LAVA Android Test Image
	- VenHw(09831032-6FA3-4484-AF4F-0A000A8D3A82)/HD(3,MBR,0x00000000,0x200000,0x20000)/uImage
	- Initrd: VenHw(09831032-6FA3-4484-AF4F-0A000A8D3A82)/HD(3,MBR,0x00000000,0x200000,0x20000)/uInitrd
	- Arguments: console=tty0 console=ttyAMA0,38400n8 rootwait ro init=/init androidboot.console=ttyAMA0
	- FDT: VenHw(09831032-6FA3-4484-AF4F-0A000A8D3A82)/HD(3,MBR,0x00000000,0x200000,0x20000)/v2p-ca15-tc2.dtb
	- LoaderType: Linux kernel with Local FDT
-----------------------
Global FDT Config
	- VenHw(1F15DA3C-37FF-4070-B471-BB4AF12A724A)/MemoryMapped(0x0,0xE800000,0xE803000)
-----------------------
[a] Boot Manager
[b] Shell
Start: 2
ERROR: Did not find Device Tree blob.
ASSERT /linaro/lt/uefi/uefi-next.git/edk2/MdeModulePkg/Core/Dxe/Mem/Pool.c(424): CR has Bad Signature

    <LAVA_DISPATCHER>2013-04-29 05:45:09 PM WARNING: Sending newline in case of corruption.
<LAVA_DISPATCHER>2013-04-29 05:45:39 PM WARNING: Sending newline in case of corruption.
<LAVA_DISPATCHER>2013-04-29 05:46:09 PM WARNING: Sending newline in case of corruption.
<LAVA_DISPATCHER>2013-04-29 05:46:39 PM WARNING: Sending newline in case of corruption.
<LAVA_DISPATCHER>2013-04-29 05:47:09 PM WARNING: Sending newline in case of corruption.
<LAVA_DISPATCHER>2013-04-29 05:47:39 PM WARNING: Sending newline in case of corruption.
<LAVA_DISPATCHER>2013-04-29 05:48:09 PM ERROR: boot_linaro_image failed

    Traceback (most recent call last):
  File "/srv/lava/.cache/branch-cache/lava-dispatcher/checkouts/573-yongqin.liu@linaro.org-20130402103649-wugi9t50bavtxqax/lava_dispatcher/actions/boot_control.py", line 76, in run
    client.boot_linaro_image()
  File "/srv/lava/.cache/branch-cache/lava-dispatcher/checkouts/573-yongqin.liu@linaro.org-20130402103649-wugi9t50bavtxqax/lava_dispatcher/client/base.py", line 427, in boot_linaro_image
    wait_for_prompt(self.proc, TESTER_PS1_PATTERN, timeout=timeout)
  File "/srv/lava/.cache/branch-cache/lava-dispatcher/checkouts/573-yongqin.liu@linaro.org-20130402103649-wugi9t50bavtxqax/lava_dispatcher/client/base.py", line 53, in wait_for_prompt
    connection.expect(prompt_pattern, timeout=partial_timeout)
  File "/srv/lava/.cache/branch-cache/lava-dispatcher/checkouts/573-yongqin.liu@linaro.org-20130402103649-wugi9t50bavtxqax/lava_dispatcher/utils.py", line 206, in expect
    return super(logging_spawn, self).expect(*args, **kw)
  File "/srv/lava/.cache/eggs/pexpect-2.4-py2.7.egg/pexpect.py", line 1316, in expect
    return self.expect_list(compiled_pattern_list, timeout, searchwindowsize)
  File "/srv/lava/.cache/eggs/pexpect-2.4-py2.7.egg/pexpect.py", line 1330, in expect_list
    return self.expect_loop(searcher_re(pattern_list), timeout, searchwindowsize)
  File "/srv/lava/.cache/eggs/pexpect-2.4-py2.7.egg/pexpect.py", line 1414, in expect_loop
    raise TIMEOUT (str(e) + '\n' + str(self))
TIMEOUT: Timeout exceeded in read_nonblocking().

    <lava_dispatcher.utils.logging_spawn object at 0x275f310>

    version: 2.4 ($Revision: 516 $)
command: /usr/bin/telnet
args: [u'/usr/bin/telnet', u'pdtl-tt1', u'6007']
searcher: searcher_re:
    0: re.compile("linaro-test \[rc=(\d+)\]# ")
buffer (last 100 chars): ERT /linaro/lt/uefi/uefi-next.git/edk2/MdeModulePkg/Core/Dxe/Mem/Pool.c(424): CR has Bad Signature

before (last 100 chars): ERT /linaro/lt/uefi/uefi-next.git/edk2/MdeModulePkg/Core/Dxe/Mem/Pool.c(424): CR has Bad Signature

after: <class 'pexpect.TIMEOUT'>
match: None
match_index: None
exitstatus: None
flag_eof: False
pid: 11791
child_fd: 3
closed: False
timeout: 1200
delimiter: <class 'pexpect.EOF'>
logfile: None

    logfile_read: <lava_dispatcher.context.Flusher object at 0x24b2a10>

    logfile_send: None
maxread: 2000
ignorecase: False
searchwindowsize: None
delaybeforesend: 0.05
delayafterclose: 0.1
delayafterterminate: 0.1

    <LAVA_DISPATCHER>2013-04-29 05:48:09 PM WARNING: [ACTION-E] boot_linaro_image is finished with error (Failed to boot test image.).
<LAVA_DISPATCHER>2013-04-29 05:48:09 PM INFO: Submitting the test result with parameters = {u'token': '<HIDDEN>', u'stream': u'/public/personal/pdsw-power/biglittle/', u'server': u'http://pdsw-power@pdsw-lava.cambridge.arm.com/RPC2/'}
<LAVA_DISPATCHER>2013-04-29 05:48:09 PM INFO: Dashboard : http://pdsw-lava.cambridge.arm.com/dashboard/permalink/bundle/dddea5ee2b8f9dd060c1f2452fbb75a9ca8c17ea/