Hi Tyler,

Both were *not* defined.

I added them now in the device_type/ARM-rtsm_foundation-armv8.conf

UEFI firmware (version origin/edk2-next built at 15:09:15 on Feb 20 2014)

[2J[01;01H[=3h[2J[01;01H[2J[01;01H[=3h[2J[01;01H[2J[01;01H[=3h[2J[01;01H[2J[01;01H[=3h[2J[01;01H[2J[01;01H[=3h[2J[01;01H[2J[01;01H[=3h[2J[01;01H[0m[35m[40m

[0m[37m[40mThe default boot selection will start in 10 seconds 9 seconds

8 seconds

7 seconds

6 seconds

5 seconds

4 seconds

3 seconds

2 seconds

1 seconds

ERROR: Did not find initrd image.

[1] Linux from SemiHosting

[2] Shell

[3] Boot Manager

Start:

I looked in the basemodel device config can could see

interrupt_boot_command = b

So tried replacing interrupt_boot_prompt = The default boot selection will start in with that too, but in vain

Would I have to restart the lava service to have the change take effect?

Thanks

Basil Eljuse…

From: Tyler Baker [mailto:tyler.baker@linaro.org]
Sent: 20 February 2014 23:30
To: Basil Eljuse
Cc: Linaro Validation
Subject: Re: [Linaro-validation] Any known issues with boot_cmds support on foundation models...

Ah ok. :)

Can you confirm you have these value set in your foundation configuration?

bootloader_prompt = Start:

interrupt_boot_prompt = The default boot selection will start in

On 20 February 2014 15:26, Basil Eljuse <Basil.Eljuse@arm.com> wrote:

Hi Tyler,

The below is bit of ‘misnomer’, Dean just had the device name labelled incorrectly.

"device_type": "ARM-rtsm_fvp_base-aemv8a",

The actual model invocation happening is indeed Foundation_v8.

For base model, both AEM and Cortex, the boot_cmds worked perfectly as in indicated earlier. It was only for foundation I could see no response to any of my boot commands in json file ):

Thanks

Basil Eljuse…

From: Tyler Baker [mailto:tyler.baker@linaro.org]
Sent: 20 February 2014 23:17

To: Basil Eljuse
Cc: Linaro Validation
Subject: Re: [Linaro-validation] Any known issues with boot_cmds support on foundation models...

The log file and job def are targeted at the base model? Not a foundation?

I modified the job def a bit and it's booting for me on the base model:

http://community.validation.linaro.org/scheduler/job/6261/definition

On 20 February 2014 14:45, Basil Eljuse <Basil.Eljuse@arm.com> wrote:

Sorry Tyler,

I should have copied the entire snippet. I already do have that defined

{

"command": "deploy_linaro_image",

"parameters": {

"bootloadertype": "uefi",

"hwpack": "http://releases.linaro.org/14.01/openembedded/aarch64/hwpack_linaro-vexpress64-rtsm_20140126-596_arm64_supported.tar.gz",

"rootfs": "http://releases.linaro.org/14.01/openembedded/aarch64/linaro-image-minimal-genericarmv8-20140127-635.rootfs.tar.gz"

}

Attaching my full json for ref. Also the lava log output.

Thanks

Basil Eljuse…

From: Tyler Baker [mailto:tyler.baker@linaro.org]
Sent: 20 February 2014 22:38

To: Basil Eljuse
Cc: Linaro Validation
Subject: Re: [Linaro-validation] Any known issues with boot_cmds support on foundation models...

Hi Basil,

After reviewing the code if you add the parameter "bootloadertype" to uefi in the deployment action similar to this example:

http://community.validation.linaro.org/scheduler/job/6139/definition

LAVA will attempt to issue your boot_cmds.

Let me know!

On 20 February 2014 14:30, Tyler Baker <tyler.baker@linaro.org> wrote:

Hi Basil,

We have never had to use UEFI on the Foundation model before, so no boot_cmds are used. I'm working on some of the fastmodel issues today, and will have a look at what it will take to support UEFI.

Cheers,

On 20 February 2014 14:20, Basil Eljuse <Basil.Eljuse@arm.com> wrote:

Hello All,

I am able to successfully use the following boot_cmds option in Base model instances. However if I use the same on foundation model it does not work.

It comes to the uefi menu option and is not seem to issue any of my boot commands as defined in the json file.

Is it possible that for foundation models the boot_cmds option is not supported?

My json fragment is

                "boot_cmds": [

                    "sendline 3",

                    "expect Choice:",

                    "sendline 2",

                    "expect Update entry:",

                    "sendline 1",

                    "expect File path of the EFI Application or the kernel: Image",

                    "sendline \n",

                    "expect Keep the initrd: [y/n]",

                    "sendline n",

                    "expect Arguments to pass to the binary: console=ttyAMA0 earlyprintk=pl011,0x1c090000 debug user_debug=31 loglevel=9",

                    "sendline \b9 root=/dev/vda2 rw",

                    "expect Description for this new Entry: Linux from SemiHosting",

                    "sendline \n",

                    "expect Choice:",

                    "sendline 5",

                    "expect Start:",

                    "sendline 1"

                ],

Any confirmation would be great!

Thanks

Basil Eljuse…

-- IMPORTANT NOTICE: The contents of this email and any attachments are confidential and may also be privileged. If you are not the intended recipient, please notify the sender immediately and do not disclose the contents to any other person, use it for any purpose, or store or copy the information in any medium. Thank you.

ARM Limited, Registered office 110 Fulbourn Road, Cambridge CB1 9NJ, Registered in England & Wales, Company No: 2557590
ARM Holdings plc, Registered office 110 Fulbourn Road, Cambridge CB1 9NJ, Registered in England & Wales, Company No: 2548782

_______________________________________________
linaro-validation mailing list
linaro-validation@lists.linaro.org
http://lists.linaro.org/mailman/listinfo/linaro-validation

Tyler Baker
Technical Architect, LAVA
Linaro.org | Open source software for ARM SoCs
Follow Linaro: http://www.facebook.com/pages/Linaro
http://twitter.com/#!/linaroorg - http://www.linaro.org/linaro-blog

-- IMPORTANT NOTICE: The contents of this email and any attachments are confidential and may also be privileged. If you are not the intended recipient, please notify the sender immediately and do not disclose the contents to any other person, use it for any purpose, or store or copy the information in any medium. Thank you.

ARM Limited, Registered office 110 Fulbourn Road, Cambridge CB1 9NJ, Registered in England & Wales, Company No: 2557590
ARM Holdings plc, Registered office 110 Fulbourn Road, Cambridge CB1 9NJ, Registered in England & Wales, Company No: 2548782