2015-03-13 03:19:18 AM INFO: Attempting to connect to device using: telnet localhost 5000 2015-03-13 03:19:18 AM DEBUG: expect (10): '[, 'Connection closed by foreign host\\.', 'Connected\\.\r', 'Data Buffering Suspended\\.']' Trying 127.0.0.1... Connected to localhost. Escape character is '^]'. Connection closed by foreign host. 2015-03-13 03:19:18 AM INFO: Matched 'Connection closed by foreign host\\.' which means retry 2015-03-13 03:19:18 AM WARNING: no reset_port command configured 2015-03-13 03:19:23 AM INFO: Attempting to connect to device using: telnet localhost 5000 2015-03-13 03:19:23 AM DEBUG: expect (10): '[, 'Connection closed by foreign host\\.', 'Connected\\.\r', 'Data Buffering Suspended\\.']' Trying 127.0.0.1... Connected to localhost. Escape character is '^]'. 2015-03-13 03:19:33 AM INFO: Matched which means all-good 2015-03-13 03:19:33 AM DEBUG: [ACTION-B] Single node test! 2015-03-13 03:19:33 AM INFO: [ACTION-B] deploy_linaro_kernel is started with {u'dtb': u'file:///images/omap4-panda-es.dtb', u'kernel': u'file:///images/uImage', u'rootfs': u'file:///images/linaro-image-lamp-genericarmv7a-20141212-311.rootfs.tar.gz'} 2015-03-13 03:19:33 AM DEBUG: Attempting to set deployment data 2015-03-13 03:19:33 AM DEBUG: About to download file:///images/uImage to the host 2015-03-13 03:19:33 AM INFO: Downloading image: file:///images/uImage 2015-03-13 03:19:33 AM INFO: md5sum of downloaded content: 14c6af69b87fc8f99098986609dba33a 2015-03-13 03:19:33 AM DEBUG: sha256sum of downloaded content: 6bddf9d6c3174d31c42e8f4c37207e499e61493d11625fe5f1d53bb1d3ad1c42 2015-03-13 03:19:33 AM DEBUG: About to download file:///images/omap4-panda-es.dtb to the host 2015-03-13 03:19:33 AM INFO: Downloading image: file:///images/omap4-panda-es.dtb 2015-03-13 03:19:33 AM INFO: md5sum of downloaded content: 6a8595c15b0fabe62cfb025981f51373 2015-03-13 03:19:33 AM DEBUG: sha256sum of downloaded content: 2bf30a1f437c0dd6648eebfb7072e14e7cbd39d8d8e74c650a299306a1026718 2015-03-13 03:19:33 AM DEBUG: About to download file:///images/linaro-image-lamp-genericarmv7a-20141212-311.rootfs.tar.gz to the host 2015-03-13 03:19:33 AM INFO: Downloading image: file:///images/linaro-image-lamp-genericarmv7a-20141212-311.rootfs.tar.gz 2015-03-13 03:19:37 AM INFO: md5sum of downloaded content: 9b139d33e10290341bffc3d09e571566 2015-03-13 03:19:37 AM DEBUG: sha256sum of downloaded content: b6bf691852f121feee7bf100cd817d1f1ab4545dc613e721e41dedaa8f6f4158 2015-03-13 03:19:37 AM DEBUG: Executing on host : '['sh', '-c', u'file /var/lib/lava/dispatcher/tmp/tmpmtQzDS/.uImage']' 2015-03-13 03:19:37 AM INFO: Attempting to set boot command as bootm 2015-03-13 03:19:37 AM INFO: Attempting to set uImage Load Addresses 2015-03-13 03:19:37 AM DEBUG: setting status pass 2015-03-13 03:19:37 AM DEBUG: finally status pass 2015-03-13 03:19:37 AM INFO: [ACTION-E] deploy_linaro_kernel is finished successfully. 2015-03-13 03:19:37 AM INFO: [ACTION-B] lava_test_shell is started with {u'testdef_repos': [{u'git-repo': u'http://git.linaro.org/qa/test-definitions.git', u'testdef': u'openembedded/alldebug-kernel.yaml'}], u'timeout': 3600} 2015-03-13 03:19:37 AM INFO: Boot the test image 2015-03-13 03:19:37 AM INFO: Booting the test image. Attempt: 1 2015-03-13 03:19:37 AM DEBUG: expect (1): '['.+', , ]' 2015-03-13 03:19:37 AM DEBUG: expect (1): '['.+', , ]' 2015-03-13 03:19:38 AM INFO: Perform soft reboot the system 2015-03-13 03:19:38 AM DEBUG: sending control character: c 2015-03-13 03:19:38 AM DEBUG: send (delay_ms=0):  2015-03-13 03:19:38 AM DEBUG: send (delay_ms=0): reboot 2015-03-13 03:19:38 AM DEBUG: send (delay_ms=0): 2015-03-13 03:19:38 AM DEBUG: expect (120): '[, 'Restarting system.', 'The system is going down for reboot NOW', 'Will now restart', 'U-Boot']' U-Boot2015-03-13 03:19:53 AM DEBUG: expect (1200): 'Hit any key to stop autoboot' SPL 2013.01.-rc1 (Jul 10 2013 - 14:48:35) OMAP4430 ES2.1 Bypassing DPLL failed 4a008180 OMAP SD/MMC: 0 reading u-boot.img reading u-boot.img U-Boot 2013.01.-rc1 (Jul 10 2013 - 14:48:35) CPU : OMAP4430 ES2.1 Board: OMAP4 Panda I2C: ready DRAM: 1 GiB MMC: OMAP SD/MMC: 0 Using default environment In: serial Out: serial Err: serial Net: No ethernet found. checking for preEnv.txt reading preEnv.txt 26 bytes read Loaded environment from preEnv.txt Importing preboot environment from mmc ... Hit any key to stop autoboot: 10 2015-03-13 03:19:55 AM DEBUG: send (delay_ms=0): b 2015-03-13 03:19:55 AM INFO: Loading boot_cmds from device configuration 2015-03-13 03:19:55 AM DEBUG: boot_cmds(after preprocessing): ['setenv autoload no', "setenv initrd_high '0xffffffff'", "setenv fdt_high '0xffffffff'", u"setenv kernel_addr_r '0x80200000'", u"setenv initrd_addr_r '0x81600000'", u"setenv fdt_addr_r '0x815f0000'", u"setenv loadkernel 'tftp ${kernel_addr_r} tmpmtQzDS/.uImage'", "setenv loadinitrd 'tftp ${initrd_addr_r} {RAMDISK}; setenv initrd_size ${filesize}'", u"setenv loadfdt 'tftp ${fdt_addr_r} tmpmtQzDS/omap4-panda-es.dtb'", "setenv bootargs 'console=ttyO2,115200n8 root=/dev/ram0 fixrtc nocompcache vram=48M omapfb.vram=0:24M mem=456M@0x80000000 mem=512M@0xA0000000 ip=dhcp init=init'", u"setenv bootcmd 'usb start; dhcp; setenv serverip 192.168.1.166; run loadkernel; run loadinitrd; run loadfdt; bootm ${kernel_addr_r} - ${fdt_addr_r}'", 'boot'] 2015-03-13 03:19:55 AM DEBUG: expect (150): 'Panda'  0 Panda # 2015-03-13 03:19:55 AM DEBUG: send (delay_ms=0): setenv autoload no 2015-03-13 03:19:56 AM DEBUG: send (delay_ms=0): 2015-03-13 03:19:56 AM DEBUG: expect (150): 'Panda' setenv autoload no Panda 2015-03-13 03:19:56 AM DEBUG: send (delay_ms=0): setenv initrd_high '0xffffffff' 2015-03-13 03:19:58 AM DEBUG: send (delay_ms=0): 2015-03-13 03:19:58 AM DEBUG: expect (150): 'Panda' # setenv initrd_high '0xffffffff' Panda 2015-03-13 03:19:58 AM DEBUG: send (delay_ms=0): setenv fdt_high '0xffffffff' 2015-03-13 03:19:59 AM DEBUG: send (delay_ms=0): 2015-03-13 03:19:59 AM DEBUG: expect (150): 'Panda' # setenv fdt_high '0xffffffff' Panda 2015-03-13 03:19:59 AM DEBUG: send (delay_ms=0): setenv kernel_addr_r '0x80200000' 2015-03-13 03:20:01 AM DEBUG: send (delay_ms=0): 2015-03-13 03:20:01 AM DEBUG: expect (150): 'Panda' # setenv kernel_addr_r '0x80200000' Panda 2015-03-13 03:20:01 AM DEBUG: send (delay_ms=0): setenv initrd_addr_r '0x81600000' 2015-03-13 03:20:03 AM DEBUG: send (delay_ms=0): 2015-03-13 03:20:03 AM DEBUG: expect (150): 'Panda' # setenv initrd_addr_r '0x81600000' Panda 2015-03-13 03:20:03 AM DEBUG: send (delay_ms=0): setenv fdt_addr_r '0x815f0000' 2015-03-13 03:20:04 AM DEBUG: send (delay_ms=0): 2015-03-13 03:20:04 AM DEBUG: expect (150): 'Panda' # setenv fdt_addr_r '0x815f0000' Panda 2015-03-13 03:20:04 AM DEBUG: send (delay_ms=0): setenv loadkernel 'tftp ${kernel_addr_r} tmpmtQzDS/.uImage' 2015-03-13 03:20:07 AM DEBUG: send (delay_ms=0): 2015-03-13 03:20:07 AM DEBUG: expect (150): 'Panda' # setenv loadkernel 'tftp ${kernel_addr_r} tmpmtQzDS/.uImage' Panda 2015-03-13 03:20:07 AM DEBUG: send (delay_ms=0): setenv loadinitrd 'tftp ${initrd_addr_r} {RAMDISK}; setenv initrd_size ${filesize}' 2015-03-13 03:20:11 AM DEBUG: send (delay_ms=0): 2015-03-13 03:20:11 AM DEBUG: expect (150): 'Panda' # setenv loadinitrd 'tftp ${initrd_addr_r} {RAMDISK}; setenv initrd_size ${filesize}' Panda 2015-03-13 03:20:11 AM DEBUG: send (delay_ms=0): setenv loadfdt 'tftp ${fdt_addr_r} tmpmtQzDS/omap4-panda-es.dtb' 2015-03-13 03:20:15 AM DEBUG: send (delay_ms=0): 2015-03-13 03:20:15 AM DEBUG: expect (150): 'Panda' # setenv loadfdt 'tftp ${fdt_addr_r} tmpmtQzDS/omap4-panda-es.dtb' Panda 2015-03-13 03:20:15 AM DEBUG: send (delay_ms=0): setenv bootargs 'console=ttyO2,115200n8 root=/dev/ram0 fixrtc nocompcache vram=48M omapfb.vram=0:24M mem=456M@0x80000000 mem=512M@0xA0000000 ip=dhcp init=init' 2015-03-13 03:20:23 AM DEBUG: send (delay_ms=0): 2015-03-13 03:20:23 AM DEBUG: expect (150): 'Panda' # setenv bootargs 'console=ttyO2,115200n8 root=/dev/ram0 fixrtc nocompcache vram=48M omapfb.vram=0:24M mem=456M@0x80000000 mem=512M@0xA0000000 ip=dhcp init=init' Panda 2015-03-13 03:20:23 AM DEBUG: send (delay_ms=0): setenv bootcmd 'usb start; dhcp; setenv serverip 192.168.1.166; run loadkernel; run loadinitrd; run loadfdt; bootm ${kernel_addr_r} - ${fdt_addr_r}' 2015-03-13 03:20:30 AM DEBUG: send (delay_ms=0): 2015-03-13 03:20:30 AM DEBUG: expect (150): 'Panda' # setenv bootcmd 'usb start; dhcp; setenv serverip 192.168.1.166; run loadkernel; run loadinitrd; run loadfdt; bootm ${kernel_addr_r} - ${fdt_addr_r}' Panda 2015-03-13 03:20:30 AM DEBUG: send (delay_ms=0): boot 2015-03-13 03:20:30 AM DEBUG: send (delay_ms=0): 2015-03-13 03:20:30 AM DEBUG: Bootloader load time: 35.23 seconds 2015-03-13 03:20:30 AM DEBUG: expect (300): 'Linux version' # boot (Re)start USB... USB0: USB EHCI 1.00 scanning bus 0 for devices... 3 USB Device(s) found scanning usb for storage devices... 0 Storage Device(s) found scanning usb for ethernet devices... 1 Ethernet Device(s) found Waiting for Ethernet connection... done. BOOTP broadcast 1 BOOTP broadcast 2 DHCP client bound to address 192.168.1.179 Waiting for Ethernet connection... done. Using sms0 device TFTP from server 192.168.1.166; our IP address is 192.168.1.179 Filename 'tmpmtQzDS/.uImage'. Load address: 0x80200000 Loading: *T T T T T T T T T T Retry count exceeded; starting again Waiting for Ethernet connection... done. Using sms0 device TFTP from server 192.168.1.166; our IP address is 192.168.1.179 Filename 'tmpmtQzDS/.uImage'. Load address: 0x80200000 Loading: *T T T T T T T T T T Retry count exceeded; starting again Waiting for Ethernet connection... done. Using sms0 device TFTP from server 192.168.1.166; our IP address is 192.168.1.179 Filename 'tmpmtQzDS/.uImage'. Load address: 0x80200000 Loading: *T T T T T T T T T T Retry count exceeded; starting again Waiting for Ethernet connection... done. Using sms0 device TFTP from server 192.168.1.166; our IP address is 192.168.1.179 Filename 'tmpmtQzDS/.uImage'. Load address: 0x80200000 Loading: *T T T T T T T T T T Retry count exceeded; starting again Waiting for Ethernet connection... done. Using sms0 device TFTP from server 192.168.1.166; our IP address is 192.168.1.179 Filename 'tmpmtQzDS/.uImage'. Load address: 0x80200000 Loading: *T T T 2015-03-13 03:25:30 AM INFO: Boot linaro image failed: Timeout exceeded. version: 3.2 command: /usr/bin/telnet args: [u'/usr/bin/telnet', u'localhost', u'5000'] searcher: buffer (last 100 chars): "address is 192.168.1.179\r\nFilename 'tmpmtQzDS/.uImage'.\r\nLoad address: 0x80200000\r\nLoading: *\x08T T T " before (last 100 chars): "address is 192.168.1.179\r\nFilename 'tmpmtQzDS/.uImage'.\r\nLoad address: 0x80200000\r\nLoading: *\x08T T T " after: match: None match_index: None exitstatus: None flag_eof: False pid: 9695 child_fd: 3 closed: False timeout: 1200 delimiter: logfile: None logfile_read: logfile_send: None maxread: 2000 ignorecase: False searchwindowsize: None delaybeforesend: 0.05 delayafterclose: 0.1 delayafterterminate: 0.1 2015-03-13 03:25:30 AM INFO: Booting the test image. Attempt: 2 2015-03-13 03:25:30 AM DEBUG: expect (1): '['.+', , ]' 2015-03-13 03:25:30 AM DEBUG: expect (1): '['.+', , ]' 2015-03-13 03:25:31 AM INFO: Perform soft reboot the system 2015-03-13 03:25:31 AM DEBUG: sending control character: c 2015-03-13 03:25:31 AM DEBUG: send (delay_ms=0):  2015-03-13 03:25:32 AM DEBUG: send (delay_ms=0): reboot 2015-03-13 03:25:32 AM DEBUG: send (delay_ms=0): 2015-03-13 03:25:32 AM DEBUG: expect (120): '[, 'Restarting system.', 'The system is going down for reboot NOW', 'Will now restart', 'U-Boot']' Abort Waiting for Ethernet connection... done. Using sms0 device TFTP from server 192.168.1.166; our IP address is 192.168.1.179 Filename '{RAMDISK}'. Load address: 0x81600000 Loading: *T T T T T T T T T T Retry count exceeded; starting again Waiting for Ethernet connection... done. Using sms0 device TFTP from server 192.168.1.166; our IP address is 192.168.1.179 Filename '{RAMDISK}'. Load address: 0x81600000 Loading: *T T T T T T T T T T 2015-03-13 03:27:32 AM INFO: Boot linaro image failed: Soft reboot failed 2015-03-13 03:27:32 AM INFO: Booting the test image. Attempt: 3 2015-03-13 03:27:32 AM DEBUG: expect (1): '['.+', , ]' 2015-03-13 03:27:32 AM DEBUG: expect (1): '['.+', , ]' 2015-03-13 03:27:33 AM INFO: Perform soft reboot the system 2015-03-13 03:27:33 AM DEBUG: sending control character: c 2015-03-13 03:27:33 AM DEBUG: send (delay_ms=0):  2015-03-13 03:27:33 AM DEBUG: send (delay_ms=0): reboot 2015-03-13 03:27:33 AM DEBUG: send (delay_ms=0): 2015-03-13 03:27:33 AM DEBUG: expect (120): '[, 'Restarting system.', 'The system is going down for reboot NOW', 'Will now restart', 'U-Boot']' Abort Waiting for Ethernet connection... done. Using sms0 device TFTP from server 192.168.1.166; our IP address is 192.168.1.179 Filename 'tmpmtQzDS/omap4-panda-es.dtb'. Load address: 0x815f0000 Loading: *T T T T T T T T T T Retry count exceeded; starting again Waiting for Ethernet connection... done. Using sms0 device TFTP from server 192.168.1.166; our IP address is 192.168.1.179 Filename 'tmpmtQzDS/omap4-panda-es.dtb'. Load address: 0x815f0000 Loading: *T T T T T T T T T T 2015-03-13 03:29:33 AM INFO: Boot linaro image failed: Soft reboot failed 2015-03-13 03:29:33 AM CRITICAL: Could not get the test image booted properly 2015-03-13 03:29:33 AM INFO: CriticalError 2015-03-13 03:29:33 AM DEBUG: finally status fail 2015-03-13 03:29:33 AM WARNING: [ACTION-E] lava_test_shell is finished with error (Could not get the test image booted properly). ErrorMessage: Could not get the test image booted properly Lava failed at action lava_test_shell with error:Could not get the test image booted properly Traceback (most recent call last): File "/usr/lib/python2.7/dist-packages/lava_dispatcher/job.py", line 364, in run action.run(**params) File "/usr/lib/python2.7/dist-packages/lava_dispatcher/actions/lava_test_shell.py", line 723, in run testdef_repos, skip_install) File "/usr/lib/python2.7/dist-packages/lava_dispatcher/actions/lava_test_shell.py", line 931, in _configure_target with target.file_system(results_part, target.lava_test_results_dir) as d: File "/usr/lib/python2.7/contextlib.py", line 17, in __enter__ return self.gen.next() File "/usr/lib/python2.7/dist-packages/lava_dispatcher/device/bootloader.py", line 424, in file_system self.context.client.boot_linaro_image() File "/usr/lib/python2.7/dist-packages/lava_dispatcher/client/base.py", line 563, in boot_linaro_image raise CriticalError(msg) CriticalError: Could not get the test image booted properly 2015-03-13 03:29:33 AM DEBUG: Finalizing child process group with PID 9695 2015-03-13 03:29:33 AM INFO: Submitting the test result with parameters = {u'token': '', u'stream': u'/anonymous/narendra/', u'server': u'http://cnk1@127.0.1.1/RPC2/'} 2015-03-13 03:29:33 AM DEBUG: server RPC endpoint URL: http://cnk1@127.0.1.1/RPC2/ 2015-03-13 03:29:34 AM INFO: Dashboard : http://127.0.1.1/dashboard/permalink/bundle/8c1329bb9f5e82a0665ff357ef9c99f27052cc1b/